Debian Codegraph @

scripts/dtc/include-prefixes/arm64/rockchip/rk3528-radxa-e20c.dts

raw
1 // SPDX-License-Identifier: GPL-2.0+
2 /*
3 * Copyright (c) 2020 Rockchip Electronics Co., Ltd
4 * Copyright (c) 2024 Radxa Limited
5 * Copyright (c) 2024 Yao Zi <[email protected]>
6 */
7
8 /dts-v1/;
9
10 #include <dt-bindings/input/input.h>
11 #include <dt-bindings/leds/common.h>
12 #include <dt-bindings/pwm/pwm.h>
13 #include "rk3528.dtsi"
14
15 / {
16 model = "Radxa E20C";
17 compatible = "radxa,e20c", "rockchip,rk3528";
18
19 aliases {
20 ethernet0 = &gmac1;
21 i2c1 = &i2c1;
22 mmc0 = &sdhci;
23 mmc1 = &sdmmc;
24 serial0 = &uart0;
25 };
26
27 chosen {
28 stdout-path = "serial0:1500000n8";
29 };
30
31 adc-keys {
32 compatible = "adc-keys";
33 io-channels = <&saradc 0>;
34 io-channel-names = "buttons";
35 keyup-threshold-microvolt = <1800000>;
36 poll-interval = <100>;
37
38 button-maskrom {
39 label = "MASKROM";
40 linux,code = <KEY_SETUP>;
41 press-threshold-microvolt = <0>;
42 };
43 };
44
45 gpio-keys {
46 compatible = "gpio-keys";
47 pinctrl-names = "default";
48 pinctrl-0 = <&user_key>;
49
50 button-user {
51 gpios = <&gpio0 RK_PA0 GPIO_ACTIVE_LOW>;
52 label = "USER";
53 linux,code = <BTN_1>;
54 wakeup-source;
55 };
56 };
57
58 leds {
59 compatible = "gpio-leds";
60 pinctrl-names = "default";
61 pinctrl-0 = <&lan_led_g>, <&sys_led_g>, <&wan_led_g>;
62
63 led-lan {
64 color = <LED_COLOR_ID_GREEN>;
65 default-state = "off";
66 function = LED_FUNCTION_LAN;
67 gpios = <&gpio4 RK_PB5 GPIO_ACTIVE_HIGH>;
68 linux,default-trigger = "netdev";
69 };
70
71 led-sys {
72 color = <LED_COLOR_ID_GREEN>;
73 default-state = "on";
74 function = LED_FUNCTION_HEARTBEAT;
75 gpios = <&gpio4 RK_PC1 GPIO_ACTIVE_LOW>;
76 linux,default-trigger = "heartbeat";
77 };
78
79 led-wan {
80 color = <LED_COLOR_ID_GREEN>;
81 default-state = "off";
82 function = LED_FUNCTION_WAN;
83 gpios = <&gpio4 RK_PC0 GPIO_ACTIVE_HIGH>;
84 linux,default-trigger = "netdev";
85 };
86 };
87
88 vdd_0v9: regulator-0v9-vdd {
89 compatible = "regulator-fixed";
90 regulator-name = "vdd_0v9";
91 regulator-always-on;
92 regulator-boot-on;
93 regulator-min-microvolt = <900000>;
94 regulator-max-microvolt = <900000>;
95 vin-supply = <&vcc5v0_sys>;
96 };
97
98 vcc_ddr: regulator-1v1-vcc-ddr {
99 compatible = "regulator-fixed";
100 regulator-name = "vcc_ddr";
101 regulator-always-on;
102 regulator-boot-on;
103 regulator-min-microvolt = <1100000>;
104 regulator-max-microvolt = <1100000>;
105 vin-supply = <&vcc5v0_sys>;
106 };
107
108 vcc_1v8: regulator-1v8-vcc {
109 compatible = "regulator-fixed";
110 regulator-name = "vcc_1v8";
111 regulator-always-on;
112 regulator-boot-on;
113 regulator-min-microvolt = <1800000>;
114 regulator-max-microvolt = <1800000>;
115 vin-supply = <&vcc_3v3>;
116 };
117
118 vcc_3v3: regulator-3v3-vcc {
119 compatible = "regulator-fixed";
120 regulator-name = "vcc_3v3";
121 regulator-always-on;
122 regulator-boot-on;
123 regulator-min-microvolt = <3300000>;
124 regulator-max-microvolt = <3300000>;
125 vin-supply = <&vcc5v0_sys>;
126 };
127
128 vcc5v0_sys: regulator-5v0-vcc-sys {
129 compatible = "regulator-fixed";
130 regulator-name = "vcc5v0_sys";
131 regulator-always-on;
132 regulator-boot-on;
133 regulator-min-microvolt = <5000000>;
134 regulator-max-microvolt = <5000000>;
135 };
136
137 vccio_sd: regulator-vccio-sd {
138 compatible = "regulator-gpio";
139 gpios = <&gpio4 RK_PB6 GPIO_ACTIVE_HIGH>;
140 pinctrl-names = "default";
141 pinctrl-0 = <&sdmmc_vol_ctrl_h>;
142 regulator-name = "vccio_sd";
143 regulator-min-microvolt = <1800000>;
144 regulator-max-microvolt = <3300000>;
145 states = <1800000 0x0>, <3300000 0x1>;
146 vin-supply = <&vcc5v0_sys>;
147 };
148
149 vdd_arm: regulator-vdd-arm {
150 compatible = "pwm-regulator";
151 pwms = <&pwm1 0 5000 PWM_POLARITY_INVERTED>;
152 pwm-supply = <&vcc5v0_sys>;
153 regulator-name = "vdd_arm";
154 regulator-always-on;
155 regulator-boot-on;
156 regulator-min-microvolt = <746000>;
157 regulator-max-microvolt = <1201000>;
158 regulator-settling-time-up-us = <250>;
159 };
160
161 vdd_logic: regulator-vdd-logic {
162 compatible = "pwm-regulator";
163 pwms = <&pwm2 0 5000 PWM_POLARITY_INVERTED>;
164 pwm-supply = <&vcc5v0_sys>;
165 regulator-name = "vdd_logic";
166 regulator-always-on;
167 regulator-boot-on;
168 regulator-min-microvolt = <705000>;
169 regulator-max-microvolt = <1006000>;
170 regulator-settling-time-up-us = <250>;
171 };
172 };
173
174 &combphy {
175 status = "okay";
176 };
177
178 &cpu0 {
179 cpu-supply = <&vdd_arm>;
180 };
181
182 &cpu1 {
183 cpu-supply = <&vdd_arm>;
184 };
185
186 &cpu2 {
187 cpu-supply = <&vdd_arm>;
188 };
189
190 &cpu3 {
191 cpu-supply = <&vdd_arm>;
192 };
193
194 &gmac1 {
195 clock_in_out = "output";
196 phy-handle = <&rgmii_phy>;
197 phy-mode = "rgmii-id";
198 phy-supply = <&vcc_3v3>;
199 pinctrl-names = "default";
200 pinctrl-0 = <&rgmii_miim>, <&rgmii_tx_bus2>, <&rgmii_rx_bus2>,
201 <&rgmii_rgmii_clk>, <&rgmii_rgmii_bus>;
202 status = "okay";
203 };
204
205 &gpu {
206 mali-supply = <&vdd_logic>;
207 status = "okay";
208 };
209
210 &i2c1 {
211 pinctrl-names = "default";
212 pinctrl-0 = <&i2c1m0_xfer>;
213 status = "okay";
214
215 eeprom@50 {
216 compatible = "belling,bl24c16a", "atmel,24c16";
217 reg = <0x50>;
218 pagesize = <16>;
219 read-only;
220 vcc-supply = <&vcc_3v3>;
221 };
222 };
223
224 &mdio1 {
225 rgmii_phy: ethernet-phy@1 {
226 compatible = "ethernet-phy-ieee802.3-c22";
227 reg = <0x1>;
228 pinctrl-names = "default";
229 pinctrl-0 = <&gmac1_rstn_l>;
230 reset-assert-us = <20000>;
231 reset-deassert-us = <100000>;
232 reset-gpios = <&gpio4 RK_PC2 GPIO_ACTIVE_LOW>;
233 };
234 };
235
236 &pcie {
237 pinctrl-names = "default";
238 pinctrl-0 = <&pciem1_pins>;
239 reset-gpios = <&gpio1 RK_PA2 GPIO_ACTIVE_HIGH>;
240 vpcie3v3-supply = <&vcc_3v3>;
241 status = "okay";
242 };
243
244 &pinctrl {
245 ethernet {
246 gmac1_rstn_l: gmac1-rstn-l {
247 rockchip,pins = <4 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>;
248 };
249 };
250
251 gpio-keys {
252 user_key: user-key {
253 rockchip,pins = <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up>;
254 };
255 };
256
257 leds {
258 lan_led_g: lan-led-g {
259 rockchip,pins = <4 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
260 };
261
262 sys_led_g: sys-led-g {
263 rockchip,pins = <4 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>;
264 };
265
266 wan_led_g: wan-led-g {
267 rockchip,pins = <4 RK_PC0 RK_FUNC_GPIO &pcfg_pull_none>;
268 };
269 };
270
271 sdmmc {
272 sdmmc_vol_ctrl_h: sdmmc-vol-ctrl-h {
273 rockchip,pins = <4 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>;
274 };
275 };
276 };
277
278 &pwm1 {
279 pinctrl-names = "default";
280 pinctrl-0 = <&pwm1m0_pins>;
281 status = "okay";
282 };
283
284 &pwm2 {
285 pinctrl-names = "default";
286 pinctrl-0 = <&pwm2m0_pins>;
287 status = "okay";
288 };
289
290 &saradc {
291 vref-supply = <&vcc_1v8>;
292 status = "okay";
293 };
294
295 &sdhci {
296 bus-width = <8>;
297 cap-mmc-highspeed;
298 mmc-hs200-1_8v;
299 no-sd;
300 no-sdio;
301 non-removable;
302 vmmc-supply = <&vcc_3v3>;
303 vqmmc-supply = <&vcc_1v8>;
304 status = "okay";
305 };
306
307 &sdmmc {
308 bus-width = <4>;
309 cap-mmc-highspeed;
310 cap-sd-highspeed;
311 disable-wp;
312 sd-uhs-sdr104;
313 vmmc-supply = <&vcc_3v3>;
314 vqmmc-supply = <&vccio_sd>;
315 status = "okay";
316 };
317
318 &uart0 {
319 pinctrl-names = "default";
320 pinctrl-0 = <&uart0m0_xfer>;
321 status = "okay";
322 };