Debian Codegraph @

scripts/dtc/include-prefixes/arm64/rockchip/rk3528-armsom-sige1.dts

raw
1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
2
3 /dts-v1/;
4
5 #include <dt-bindings/input/input.h>
6 #include <dt-bindings/leds/common.h>
7 #include <dt-bindings/pwm/pwm.h>
8 #include "rk3528.dtsi"
9
10 / {
11 model = "ArmSoM Sige1";
12 compatible = "armsom,sige1", "rockchip,rk3528";
13
14 aliases {
15 ethernet0 = &gmac1;
16 i2c0 = &i2c0;
17 mmc0 = &sdhci;
18 mmc1 = &sdmmc;
19 mmc2 = &sdio0;
20 serial0 = &uart0;
21 serial2 = &uart2;
22 };
23
24 chosen {
25 stdout-path = "serial0:1500000n8";
26 };
27
28 adc-keys {
29 compatible = "adc-keys";
30 io-channels = <&saradc 0>;
31 io-channel-names = "buttons";
32 keyup-threshold-microvolt = <1800000>;
33 poll-interval = <100>;
34
35 button-maskrom {
36 label = "MASKROM";
37 linux,code = <KEY_SETUP>;
38 press-threshold-microvolt = <0>;
39 };
40 };
41
42 leds {
43 compatible = "gpio-leds";
44 pinctrl-names = "default";
45 pinctrl-0 = <&g_led>, <&r_led>;
46
47 led-0 {
48 color = <LED_COLOR_ID_GREEN>;
49 default-state = "on";
50 function = LED_FUNCTION_HEARTBEAT;
51 gpios = <&gpio3 RK_PB3 GPIO_ACTIVE_HIGH>;
52 linux,default-trigger = "heartbeat";
53 };
54
55 led-1 {
56 color = <LED_COLOR_ID_RED>;
57 default-state = "on";
58 function = LED_FUNCTION_STATUS;
59 gpios = <&gpio3 RK_PB2 GPIO_ACTIVE_HIGH>;
60 linux,default-trigger = "default-on";
61 };
62 };
63
64 vcc0v6_ddr: regulator-0v6-vcc-ddr {
65 compatible = "regulator-fixed";
66 regulator-name = "vcc0v6_ddr";
67 regulator-always-on;
68 regulator-boot-on;
69 regulator-min-microvolt = <600000>;
70 regulator-max-microvolt = <600000>;
71 vin-supply = <&vcc5v0_sys>;
72 };
73
74 vdd_0v9: regulator-0v9-vdd {
75 compatible = "regulator-fixed";
76 regulator-name = "vdd_0v9";
77 regulator-always-on;
78 regulator-boot-on;
79 regulator-min-microvolt = <900000>;
80 regulator-max-microvolt = <900000>;
81 vin-supply = <&vcc5v0_sys>;
82 };
83
84 vcc_ddr: regulator-1v1-vcc-ddr {
85 compatible = "regulator-fixed";
86 regulator-name = "vcc_ddr";
87 regulator-always-on;
88 regulator-boot-on;
89 regulator-min-microvolt = <1100000>;
90 regulator-max-microvolt = <1100000>;
91 vin-supply = <&vcc5v0_sys>;
92 };
93
94 vcc_1v8: regulator-1v8-vcc {
95 compatible = "regulator-fixed";
96 regulator-name = "vcc_1v8";
97 regulator-always-on;
98 regulator-boot-on;
99 regulator-min-microvolt = <1800000>;
100 regulator-max-microvolt = <1800000>;
101 vin-supply = <&vcc_3v3>;
102 };
103
104 vcc1v8_ddr: regulator-1v8-vcc-ddr {
105 compatible = "regulator-fixed";
106 regulator-name = "vcc1v8_ddr";
107 regulator-always-on;
108 regulator-boot-on;
109 regulator-min-microvolt = <1800000>;
110 regulator-max-microvolt = <1800000>;
111 vin-supply = <&vcc5v0_sys>;
112 };
113
114 vcc_3v3: regulator-3v3-vcc {
115 compatible = "regulator-fixed";
116 regulator-name = "vcc_3v3";
117 regulator-always-on;
118 regulator-boot-on;
119 regulator-min-microvolt = <3300000>;
120 regulator-max-microvolt = <3300000>;
121 vin-supply = <&vcc_dcin>;
122 };
123
124 vcc3v3_sd: regulator-3v3-vcc-sd {
125 compatible = "regulator-fixed";
126 gpios = <&gpio4 RK_PA1 GPIO_ACTIVE_LOW>;
127 pinctrl-names = "default";
128 pinctrl-0 = <&sdmmc_pwren_l>;
129 regulator-name = "vcc3v3_sd";
130 regulator-min-microvolt = <3300000>;
131 regulator-max-microvolt = <3300000>;
132 vin-supply = <&vcc_3v3>;
133 };
134
135 vcc5v0_sys: regulator-5v0-vcc-sys {
136 compatible = "regulator-fixed";
137 regulator-name = "vcc5v0_sys";
138 regulator-always-on;
139 regulator-boot-on;
140 regulator-min-microvolt = <5000000>;
141 regulator-max-microvolt = <5000000>;
142 vin-supply = <&vcc_dcin>;
143 };
144
145 vcc5v0_usb1_host: regulator-5v0-vcc-usb1-host {
146 compatible = "regulator-fixed";
147 enable-active-high;
148 gpios = <&gpio4 RK_PB1 GPIO_ACTIVE_HIGH>;
149 pinctrl-names = "default";
150 pinctrl-0 = <&usb20_host1_drv_h>;
151 regulator-name = "vcc5v0_usb1_host";
152 regulator-always-on;
153 regulator-min-microvolt = <5000000>;
154 regulator-max-microvolt = <5000000>;
155 vin-supply = <&vcc5v0_sys>;
156 };
157
158 vcc5v0_usb2_host: regulator-5v0-vcc-usb2-host {
159 compatible = "regulator-fixed";
160 enable-active-high;
161 gpios = <&gpio4 RK_PB0 GPIO_ACTIVE_HIGH>;
162 pinctrl-names = "default";
163 pinctrl-0 = <&usb20_host2_drv_h>;
164 regulator-name = "vcc5v0_usb2_host";
165 regulator-always-on;
166 regulator-min-microvolt = <5000000>;
167 regulator-max-microvolt = <5000000>;
168 vin-supply = <&vcc5v0_sys>;
169 };
170
171 vcc5v0_usb_otg: regulator-5v0-vcc-usb-otg {
172 compatible = "regulator-fixed";
173 enable-active-high;
174 gpios = <&gpio1 RK_PB4 GPIO_ACTIVE_HIGH>;
175 pinctrl-names = "default";
176 pinctrl-0 = <&usb20_otg0_drv_h>;
177 regulator-name = "vcc5v0_usb_otg";
178 regulator-min-microvolt = <5000000>;
179 regulator-max-microvolt = <5000000>;
180 vin-supply = <&vcc5v0_sys>;
181 };
182
183 vcc_dcin: regulator-vcc-dcin {
184 compatible = "regulator-fixed";
185 regulator-name = "vcc_dcin";
186 regulator-always-on;
187 regulator-boot-on;
188 };
189
190 vccio_sd: regulator-vccio-sd {
191 compatible = "regulator-gpio";
192 gpios = <&gpio4 RK_PC2 GPIO_ACTIVE_LOW>;
193 pinctrl-names = "default";
194 pinctrl-0 = <&sdmmc_vol_ctrl_h>;
195 regulator-name = "vccio_sd";
196 regulator-min-microvolt = <1800000>;
197 regulator-max-microvolt = <3300000>;
198 states = <1800000 0x0>, <3300000 0x1>;
199 vin-supply = <&vcc5v0_sys>;
200 };
201
202 vdd_arm: regulator-vdd-arm {
203 compatible = "pwm-regulator";
204 pwms = <&pwm3 0 5000 PWM_POLARITY_INVERTED>;
205 pwm-supply = <&vcc5v0_sys>;
206 regulator-name = "vdd_arm";
207 regulator-always-on;
208 regulator-boot-on;
209 regulator-min-microvolt = <746000>;
210 regulator-max-microvolt = <1201000>;
211 regulator-settling-time-up-us = <250>;
212 };
213
214 vdd_logic: regulator-vdd-logic {
215 compatible = "pwm-regulator";
216 pwms = <&pwm2 0 5000 PWM_POLARITY_INVERTED>;
217 pwm-supply = <&vcc5v0_sys>;
218 regulator-name = "vdd_logic";
219 regulator-always-on;
220 regulator-boot-on;
221 regulator-min-microvolt = <705000>;
222 regulator-max-microvolt = <1006000>;
223 regulator-settling-time-up-us = <250>;
224 };
225
226 sdio_pwrseq: sdio-pwrseq {
227 compatible = "mmc-pwrseq-simple";
228 pinctrl-names = "default";
229 pinctrl-0 = <&wifi_reg_on_h>, <&clkm1_32k_out>;
230 post-power-on-delay-ms = <200>;
231 reset-gpios = <&gpio1 RK_PA6 GPIO_ACTIVE_LOW>;
232 };
233 };
234
235 &combphy {
236 status = "okay";
237 };
238
239 &cpu0 {
240 cpu-supply = <&vdd_arm>;
241 };
242
243 &cpu1 {
244 cpu-supply = <&vdd_arm>;
245 };
246
247 &cpu2 {
248 cpu-supply = <&vdd_arm>;
249 };
250
251 &cpu3 {
252 cpu-supply = <&vdd_arm>;
253 };
254
255 &gmac1 {
256 clock_in_out = "output";
257 phy-handle = <&rgmii_phy>;
258 phy-mode = "rgmii-id";
259 phy-supply = <&vcc_3v3>;
260 pinctrl-names = "default";
261 pinctrl-0 = <&rgmii_miim>, <&rgmii_tx_bus2>, <&rgmii_rx_bus2>,
262 <&rgmii_rgmii_clk>, <&rgmii_rgmii_bus>;
263 status = "okay";
264 };
265
266 &gpu {
267 mali-supply = <&vdd_logic>;
268 status = "okay";
269 };
270
271 &i2c0 {
272 pinctrl-names = "default";
273 pinctrl-0 = <&i2c0m0_xfer>;
274 status = "okay";
275
276 hym8563: rtc@51 {
277 compatible = "haoyu,hym8563";
278 reg = <0x51>;
279 #clock-cells = <0>;
280 interrupt-parent = <&gpio4>;
281 interrupts = <RK_PA0 IRQ_TYPE_LEVEL_LOW>;
282 pinctrl-names = "default";
283 pinctrl-0 = <&rtc_int_l>;
284 wakeup-source;
285 };
286 };
287
288 &mdio1 {
289 rgmii_phy: ethernet-phy@1 {
290 compatible = "ethernet-phy-ieee802.3-c22";
291 reg = <0x1>;
292 pinctrl-names = "default";
293 pinctrl-0 = <&gmac1_rstn_l>;
294 reset-assert-us = <20000>;
295 reset-deassert-us = <100000>;
296 reset-gpios = <&gpio4 RK_PB5 GPIO_ACTIVE_LOW>;
297 };
298 };
299
300 &pcie {
301 pinctrl-names = "default";
302 pinctrl-0 = <&pcie20_perstn>;
303 reset-gpios = <&gpio4 RK_PA4 GPIO_ACTIVE_HIGH>;
304 vpcie3v3-supply = <&vcc_3v3>;
305 status = "okay";
306 };
307
308 &pinctrl {
309 bluetooth {
310 bt_reg_on_h: bt-reg-on-h {
311 rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>;
312 };
313
314 bt_wake_host_h: bt-wake-host-h {
315 rockchip,pins = <1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_down>;
316 };
317
318 host_wake_bt_h: host-wake-bt-h {
319 rockchip,pins = <3 RK_PC3 RK_FUNC_GPIO &pcfg_pull_none>;
320 };
321 };
322
323 ethernet {
324 gmac1_rstn_l: gmac1-rstn-l {
325 rockchip,pins = <4 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
326 };
327 };
328
329 leds {
330 g_led: g-led {
331 rockchip,pins = <3 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
332 };
333
334 r_led: r-led {
335 rockchip,pins = <3 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
336 };
337 };
338
339 pcie {
340 pcie20_perstn: pcie20-perstn {
341 rockchip,pins = <4 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>;
342 };
343 };
344
345 rtc {
346 rtc_int_l: rtc-int-l {
347 rockchip,pins = <4 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up>;
348 };
349 };
350
351 sdmmc {
352 sdmmc_vol_ctrl_h: sdmmc-vol-ctrl-h {
353 rockchip,pins = <4 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>;
354 };
355
356 sdmmc_pwren_l: sdmmc-pwren-l {
357 rockchip,pins = <4 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>;
358 };
359 };
360
361 usb {
362 usb20_host1_drv_h: usb20-host1-drv-h {
363 rockchip,pins = <4 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>;
364 };
365
366 usb20_host2_drv_h: usb20-host2-drv-h {
367 rockchip,pins = <4 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
368 };
369
370 usb20_otg0_drv_h: usb20-otg0-drv-h {
371 rockchip,pins = <1 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>;
372 };
373 };
374
375 wifi {
376 wifi_reg_on_h: wifi-reg-on-h {
377 rockchip,pins = <1 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
378 };
379
380 wifi_wake_host_h: wifi-wake-host-h {
381 rockchip,pins = <1 RK_PA7 RK_FUNC_GPIO &pcfg_pull_down>;
382 };
383 };
384 };
385
386 &pwm2 {
387 pinctrl-names = "default";
388 pinctrl-0 = <&pwm2m0_pins>;
389 status = "okay";
390 };
391
392 &pwm3 {
393 pinctrl-names = "default";
394 pinctrl-0 = <&pwm3m0_pins>;
395 status = "okay";
396 };
397
398 &saradc {
399 vref-supply = <&vcc_1v8>;
400 status = "okay";
401 };
402
403 &sdhci {
404 bus-width = <8>;
405 cap-mmc-highspeed;
406 mmc-hs200-1_8v;
407 no-sd;
408 no-sdio;
409 non-removable;
410 vmmc-supply = <&vcc_3v3>;
411 vqmmc-supply = <&vcc_1v8>;
412 status = "okay";
413 };
414
415 &sdio0 {
416 bus-width = <4>;
417 cap-sd-highspeed;
418 cap-sdio-irq;
419 keep-power-in-suspend;
420 mmc-pwrseq = <&sdio_pwrseq>;
421 no-mmc;
422 no-sd;
423 non-removable;
424 sd-uhs-sdr104;
425 vmmc-supply = <&vcc_3v3>;
426 vqmmc-supply = <&vcc_1v8>;
427 #address-cells = <1>;
428 #size-cells = <0>;
429 status = "okay";
430
431 wifi@1 {
432 compatible = "brcm,bcm4329-fmac";
433 reg = <1>;
434 clocks = <&cru CLK_DEEPSLOW>;
435 clock-names = "lpo";
436 interrupt-parent = <&gpio1>;
437 interrupts = <RK_PA7 IRQ_TYPE_LEVEL_HIGH>;
438 interrupt-names = "host-wake";
439 pinctrl-names = "default";
440 pinctrl-0 = <&wifi_wake_host_h>;
441 };
442 };
443
444 &sdmmc {
445 bus-width = <4>;
446 cap-mmc-highspeed;
447 cap-sd-highspeed;
448 disable-wp;
449 sd-uhs-sdr104;
450 vmmc-supply = <&vcc3v3_sd>;
451 vqmmc-supply = <&vccio_sd>;
452 status = "okay";
453 };
454
455 &uart0 {
456 pinctrl-names = "default";
457 pinctrl-0 = <&uart0m0_xfer>;
458 status = "okay";
459 };
460
461 &uart2 {
462 dma-names = "tx", "rx";
463 pinctrl-names = "default";
464 pinctrl-0 = <&uart2m1_xfer>, <&uart2m1_ctsn>, <&uart2m1_rtsn>;
465 uart-has-rtscts;
466 status = "okay";
467
468 bluetooth {
469 compatible = "brcm,bcm43438-bt";
470 clocks = <&cru CLK_DEEPSLOW>;
471 clock-names = "lpo";
472 device-wakeup-gpios = <&gpio3 RK_PC3 GPIO_ACTIVE_HIGH>;
473 interrupt-parent = <&gpio1>;
474 interrupts = <RK_PC2 IRQ_TYPE_LEVEL_HIGH>;
475 interrupt-names = "host-wakeup";
476 pinctrl-names = "default";
477 pinctrl-0 = <&bt_reg_on_h>, <&bt_wake_host_h>, <&host_wake_bt_h>;
478 shutdown-gpios = <&gpio1 RK_PC1 GPIO_ACTIVE_HIGH>;
479 vbat-supply = <&vcc_3v3>;
480 vddio-supply = <&vcc_1v8>;
481 };
482 };