Debian Codegraph @

scripts/dtc/include-prefixes/arm64/rockchip/rk3399-rockpro64.dtsi

raw
1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
2 /*
3 * Copyright (c) 2017 Fuzhou Rockchip Electronics Co., Ltd.
4 * Copyright (c) 2018 Akash Gajjar <[email protected]>
5 */
6
7 #include <dt-bindings/input/linux-event-codes.h>
8 #include <dt-bindings/pwm/pwm.h>
9 #include "rk3399.dtsi"
10
11 / {
12 aliases {
13 ethernet0 = &gmac;
14 mmc0 = &sdio0;
15 mmc1 = &sdmmc;
16 mmc2 = &sdhci;
17 };
18
19 chosen {
20 stdout-path = "serial2:1500000n8";
21 };
22
23 clkin_gmac: external-gmac-clock {
24 compatible = "fixed-clock";
25 clock-frequency = <125000000>;
26 clock-output-names = "clkin_gmac";
27 #clock-cells = <0>;
28 };
29
30 gpio-keys {
31 compatible = "gpio-keys";
32 autorepeat;
33 pinctrl-names = "default";
34 pinctrl-0 = <&pwrbtn>;
35
36 key-power {
37 debounce-interval = <100>;
38 gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
39 label = "GPIO Key Power";
40 linux,code = <KEY_POWER>;
41 wakeup-source;
42 };
43 };
44
45 ir-receiver {
46 compatible = "gpio-ir-receiver";
47 gpios = <&gpio0 RK_PA6 GPIO_ACTIVE_LOW>;
48 pinctrl-0 = <&ir_int>;
49 pinctrl-names = "default";
50 };
51
52 leds {
53 compatible = "gpio-leds";
54 pinctrl-names = "default";
55 pinctrl-0 = <&work_led_pin>, <&diy_led_pin>;
56
57 work_led: led-0 {
58 label = "work";
59 default-state = "on";
60 gpios = <&gpio0 RK_PB3 GPIO_ACTIVE_HIGH>;
61 };
62
63 diy_led: led-1 {
64 label = "diy";
65 default-state = "off";
66 gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_HIGH>;
67 };
68 };
69
70 fan: pwm-fan {
71 compatible = "pwm-fan";
72 cooling-levels = <0 100 150 200 255>;
73 #cooling-cells = <2>;
74 fan-supply = <&vcc12v_dcin>;
75 pwms = <&pwm1 0 50000 0>;
76 };
77
78 sdio_pwrseq: sdio-pwrseq {
79 compatible = "mmc-pwrseq-simple";
80 clocks = <&rk808 1>;
81 clock-names = "ext_clock";
82 pinctrl-names = "default";
83 pinctrl-0 = <&wifi_enable_h>;
84 reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>;
85 };
86
87 sound {
88 compatible = "audio-graph-card";
89 label = "Analog";
90 dais = <&i2s1_p0>;
91 };
92
93 sound-dit {
94 compatible = "audio-graph-card";
95 label = "SPDIF";
96 dais = <&spdif_p0>;
97 };
98
99 spdif-dit {
100 compatible = "linux,spdif-dit";
101 #sound-dai-cells = <0>;
102
103 port {
104 dit_p0_0: endpoint {
105 remote-endpoint = <&spdif_p0_0>;
106 };
107 };
108 };
109
110 vcc12v_dcin: regulator-vcc12v-dcin {
111 compatible = "regulator-fixed";
112 regulator-name = "vcc12v_dcin";
113 regulator-always-on;
114 regulator-boot-on;
115 regulator-min-microvolt = <12000000>;
116 regulator-max-microvolt = <12000000>;
117 };
118
119 /* switched by pmic_sleep */
120 vcc1v8_s3: vcca1v8_s3: regulator-vcc1v8-s3 {
121 compatible = "regulator-fixed";
122 regulator-name = "vcc1v8_s3";
123 regulator-always-on;
124 regulator-boot-on;
125 regulator-min-microvolt = <1800000>;
126 regulator-max-microvolt = <1800000>;
127 vin-supply = <&vcc_1v8>;
128 };
129
130 /* micro SD card power */
131 vcc3v0_sd: regulator-vcc3v0-sd {
132 compatible = "regulator-fixed";
133 enable-active-high;
134 gpio = <&gpio0 RK_PA1 GPIO_ACTIVE_HIGH>;
135 pinctrl-names = "default";
136 pinctrl-0 = <&sdmmc0_pwr_h>;
137 regulator-name = "vcc3v0_sd";
138 regulator-always-on;
139 regulator-min-microvolt = <3000000>;
140 regulator-max-microvolt = <3000000>;
141 vin-supply = <&vcc3v3_sys>;
142
143 regulator-state-mem {
144 regulator-off-in-suspend;
145 };
146 };
147
148 vcc3v3_pcie: regulator-vcc3v3-pcie {
149 compatible = "regulator-fixed";
150 enable-active-high;
151 gpio = <&gpio1 RK_PD0 GPIO_ACTIVE_HIGH>;
152 pinctrl-names = "default";
153 pinctrl-0 = <&pcie_pwr_en>;
154 regulator-name = "vcc3v3_pcie";
155 regulator-always-on;
156 regulator-boot-on;
157 vin-supply = <&vcc12v_dcin>;
158 };
159
160 vcc3v3_sys: regulator-vcc3v3-sys {
161 compatible = "regulator-fixed";
162 regulator-name = "vcc3v3_sys";
163 regulator-always-on;
164 regulator-boot-on;
165 regulator-min-microvolt = <3300000>;
166 regulator-max-microvolt = <3300000>;
167 vin-supply = <&vcc5v0_sys>;
168 };
169
170 /* Actually 3 regulators (host0, 1, 2) controlled by the same gpio */
171 vcc5v0_host: regulator-vcc5v0-host {
172 compatible = "regulator-fixed";
173 enable-active-high;
174 gpio = <&gpio4 RK_PD2 GPIO_ACTIVE_HIGH>;
175 pinctrl-names = "default";
176 pinctrl-0 = <&vcc5v0_host_en>;
177 regulator-name = "vcc5v0_host";
178 regulator-always-on;
179 vin-supply = <&vcc5v0_usb>;
180 };
181
182 vcc5v0_typec: regulator-vcc5v0-typec {
183 compatible = "regulator-fixed";
184 enable-active-high;
185 gpio = <&gpio1 RK_PA3 GPIO_ACTIVE_HIGH>;
186 pinctrl-names = "default";
187 pinctrl-0 = <&vcc5v0_typec_en>;
188 regulator-name = "vcc5v0_typec";
189 regulator-always-on;
190 vin-supply = <&vcc5v0_usb>;
191 };
192
193 vcc5v0_sys: regulator-vcc5v0-sys {
194 compatible = "regulator-fixed";
195 regulator-name = "vcc5v0_sys";
196 regulator-always-on;
197 regulator-boot-on;
198 regulator-min-microvolt = <5000000>;
199 regulator-max-microvolt = <5000000>;
200 vin-supply = <&vcc12v_dcin>;
201 };
202
203 vcc5v0_usb: regulator-vcc5v0-usb {
204 compatible = "regulator-fixed";
205 regulator-name = "vcc5v0_usb";
206 regulator-always-on;
207 regulator-boot-on;
208 regulator-min-microvolt = <5000000>;
209 regulator-max-microvolt = <5000000>;
210 vin-supply = <&vcc12v_dcin>;
211 };
212
213 vcca_0v9: regulator-vcca-0v9 {
214 compatible = "regulator-fixed";
215 regulator-name = "vcca_0v9";
216 regulator-always-on;
217 regulator-boot-on;
218 regulator-min-microvolt = <900000>;
219 regulator-max-microvolt = <900000>;
220 vin-supply = <&vcc3v3_sys>;
221 };
222
223 vdd_log: regulator-vdd-log {
224 compatible = "pwm-regulator";
225 pwms = <&pwm2 0 25000 1>;
226 pwm-supply = <&vcc5v0_sys>;
227 regulator-name = "vdd_log";
228 regulator-always-on;
229 regulator-boot-on;
230 regulator-min-microvolt = <800000>;
231 regulator-max-microvolt = <1700000>;
232 };
233 };
234
235 &cpu_l0 {
236 cpu-supply = <&vdd_cpu_l>;
237 };
238
239 &cpu_l1 {
240 cpu-supply = <&vdd_cpu_l>;
241 };
242
243 &cpu_l2 {
244 cpu-supply = <&vdd_cpu_l>;
245 };
246
247 &cpu_l3 {
248 cpu-supply = <&vdd_cpu_l>;
249 };
250
251 &cpu_b0 {
252 cpu-supply = <&vdd_cpu_b>;
253 };
254
255 &cpu_b1 {
256 cpu-supply = <&vdd_cpu_b>;
257 };
258
259 &cpu_thermal {
260 trips {
261 cpu_warm: cpu_warm {
262 temperature = <55000>;
263 hysteresis = <2000>;
264 type = "active";
265 };
266
267 cpu_hot: cpu_hot {
268 temperature = <65000>;
269 hysteresis = <2000>;
270 type = "active";
271 };
272 };
273
274 cooling-maps {
275 map2 {
276 trip = <&cpu_warm>;
277 cooling-device = <&fan THERMAL_NO_LIMIT 1>;
278 };
279
280 map3 {
281 trip = <&cpu_hot>;
282 cooling-device = <&fan 2 THERMAL_NO_LIMIT>;
283 };
284 };
285 };
286
287 &emmc_phy {
288 status = "okay";
289 };
290
291 &gmac {
292 assigned-clocks = <&cru SCLK_RMII_SRC>;
293 assigned-clock-parents = <&clkin_gmac>;
294 clock_in_out = "input";
295 phy-supply = <&vcc_lan>;
296 phy-mode = "rgmii";
297 pinctrl-names = "default";
298 pinctrl-0 = <&rgmii_pins>;
299 snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>;
300 snps,reset-active-low;
301 snps,reset-delays-us = <0 10000 50000>;
302 tx_delay = <0x28>;
303 rx_delay = <0x11>;
304 status = "okay";
305 };
306
307 &hdmi {
308 avdd-0v9-supply = <&vcca_0v9>;
309 avdd-1v8-supply = <&vcc1v8_dvp>;
310 ddc-i2c-bus = <&i2c3>;
311 pinctrl-names = "default";
312 pinctrl-0 = <&hdmi_cec>;
313 status = "okay";
314 };
315
316 &hdmi_sound {
317 status = "okay";
318 };
319
320 &gpu {
321 mali-supply = <&vdd_gpu>;
322 status = "okay";
323 };
324
325 &i2c0 {
326 clock-frequency = <400000>;
327 i2c-scl-rising-time-ns = <168>;
328 i2c-scl-falling-time-ns = <4>;
329 status = "okay";
330
331 rk808: pmic@1b {
332 compatible = "rockchip,rk808";
333 reg = <0x1b>;
334 interrupt-parent = <&gpio3>;
335 interrupts = <10 IRQ_TYPE_LEVEL_LOW>;
336 #clock-cells = <1>;
337 clock-output-names = "xin32k", "rk808-clkout2";
338 pinctrl-names = "default";
339 pinctrl-0 = <&pmic_int_l>;
340 system-power-controller;
341 wakeup-source;
342
343 vcc1-supply = <&vcc5v0_sys>;
344 vcc2-supply = <&vcc5v0_sys>;
345 vcc3-supply = <&vcc5v0_sys>;
346 vcc4-supply = <&vcc5v0_sys>;
347 vcc6-supply = <&vcc5v0_sys>;
348 vcc7-supply = <&vcc5v0_sys>;
349 vcc8-supply = <&vcc3v3_sys>;
350 vcc9-supply = <&vcc5v0_sys>;
351 vcc10-supply = <&vcc5v0_sys>;
352 vcc11-supply = <&vcc5v0_sys>;
353 vcc12-supply = <&vcc3v3_sys>;
354 vddio-supply = <&vcca_1v8>;
355
356 regulators {
357 vdd_center: DCDC_REG1 {
358 regulator-name = "vdd_center";
359 regulator-always-on;
360 regulator-boot-on;
361 regulator-min-microvolt = <750000>;
362 regulator-max-microvolt = <1350000>;
363 regulator-ramp-delay = <6001>;
364 regulator-state-mem {
365 regulator-off-in-suspend;
366 };
367 };
368
369 vdd_cpu_l: DCDC_REG2 {
370 regulator-name = "vdd_cpu_l";
371 regulator-always-on;
372 regulator-boot-on;
373 regulator-min-microvolt = <750000>;
374 regulator-max-microvolt = <1350000>;
375 regulator-ramp-delay = <6001>;
376 regulator-state-mem {
377 regulator-off-in-suspend;
378 };
379 };
380
381 vcc_ddr: DCDC_REG3 {
382 regulator-name = "vcc_ddr";
383 regulator-always-on;
384 regulator-boot-on;
385 regulator-state-mem {
386 regulator-on-in-suspend;
387 };
388 };
389
390 vcc_1v8: DCDC_REG4 {
391 regulator-name = "vcc_1v8";
392 regulator-always-on;
393 regulator-boot-on;
394 regulator-min-microvolt = <1800000>;
395 regulator-max-microvolt = <1800000>;
396 regulator-state-mem {
397 regulator-on-in-suspend;
398 regulator-suspend-microvolt = <1800000>;
399 };
400 };
401
402 vcc1v8_dvp: LDO_REG1 {
403 regulator-name = "vcc1v8_dvp";
404 regulator-always-on;
405 regulator-boot-on;
406 regulator-min-microvolt = <1800000>;
407 regulator-max-microvolt = <1800000>;
408 regulator-state-mem {
409 regulator-off-in-suspend;
410 };
411 };
412
413 vcc3v0_touch: LDO_REG2 {
414 regulator-name = "vcc3v0_touch";
415 regulator-min-microvolt = <3000000>;
416 regulator-max-microvolt = <3000000>;
417 regulator-state-mem {
418 regulator-off-in-suspend;
419 };
420 };
421
422 vcca_1v8: LDO_REG3 {
423 regulator-name = "vcca_1v8";
424 regulator-always-on;
425 regulator-boot-on;
426 regulator-min-microvolt = <1800000>;
427 regulator-max-microvolt = <1800000>;
428 regulator-state-mem {
429 regulator-on-in-suspend;
430 regulator-suspend-microvolt = <1800000>;
431 };
432 };
433
434 vcc_sdio: LDO_REG4 {
435 regulator-name = "vcc_sdio";
436 regulator-always-on;
437 regulator-boot-on;
438 regulator-min-microvolt = <1800000>;
439 regulator-max-microvolt = <3000000>;
440 regulator-state-mem {
441 regulator-on-in-suspend;
442 regulator-suspend-microvolt = <3000000>;
443 };
444 };
445
446 vcca3v0_codec: LDO_REG5 {
447 regulator-name = "vcca3v0_codec";
448 regulator-always-on;
449 regulator-boot-on;
450 regulator-min-microvolt = <3000000>;
451 regulator-max-microvolt = <3000000>;
452 regulator-state-mem {
453 regulator-off-in-suspend;
454 };
455 };
456
457 vcc_1v5: LDO_REG6 {
458 regulator-name = "vcc_1v5";
459 regulator-always-on;
460 regulator-boot-on;
461 regulator-min-microvolt = <1500000>;
462 regulator-max-microvolt = <1500000>;
463 regulator-state-mem {
464 regulator-on-in-suspend;
465 regulator-suspend-microvolt = <1500000>;
466 };
467 };
468
469 vcca1v8_codec: LDO_REG7 {
470 regulator-name = "vcca1v8_codec";
471 regulator-always-on;
472 regulator-boot-on;
473 regulator-min-microvolt = <1800000>;
474 regulator-max-microvolt = <1800000>;
475 regulator-state-mem {
476 regulator-off-in-suspend;
477 };
478 };
479
480 vcc_3v0: LDO_REG8 {
481 regulator-name = "vcc_3v0";
482 regulator-always-on;
483 regulator-boot-on;
484 regulator-min-microvolt = <3000000>;
485 regulator-max-microvolt = <3000000>;
486 regulator-state-mem {
487 regulator-on-in-suspend;
488 regulator-suspend-microvolt = <3000000>;
489 };
490 };
491
492 vcc3v3_s3: vcc_lan: SWITCH_REG1 {
493 regulator-name = "vcc3v3_s3";
494 regulator-always-on;
495 regulator-boot-on;
496 regulator-state-mem {
497 regulator-off-in-suspend;
498 };
499 };
500
501 vcc3v3_s0: SWITCH_REG2 {
502 regulator-name = "vcc3v3_s0";
503 regulator-state-mem {
504 regulator-off-in-suspend;
505 };
506 };
507 };
508 };
509
510 vdd_cpu_b: regulator@40 {
511 compatible = "silergy,syr827";
512 reg = <0x40>;
513 fcs,suspend-voltage-selector = <1>;
514 pinctrl-names = "default";
515 pinctrl-0 = <&vsel1_pin>;
516 regulator-name = "vdd_cpu_b";
517 regulator-min-microvolt = <712500>;
518 regulator-max-microvolt = <1500000>;
519 regulator-ramp-delay = <1000>;
520 regulator-always-on;
521 regulator-boot-on;
522 vin-supply = <&vcc5v0_sys>;
523
524 regulator-state-mem {
525 regulator-off-in-suspend;
526 };
527 };
528
529 vdd_gpu: regulator@41 {
530 compatible = "silergy,syr828";
531 reg = <0x41>;
532 fcs,suspend-voltage-selector = <1>;
533 pinctrl-names = "default";
534 pinctrl-0 = <&vsel2_pin>;
535 regulator-name = "vdd_gpu";
536 regulator-min-microvolt = <712500>;
537 regulator-max-microvolt = <1500000>;
538 regulator-ramp-delay = <1000>;
539 regulator-always-on;
540 regulator-boot-on;
541 vin-supply = <&vcc5v0_sys>;
542
543 regulator-state-mem {
544 regulator-off-in-suspend;
545 };
546 };
547 };
548
549 &i2c1 {
550 i2c-scl-rising-time-ns = <300>;
551 i2c-scl-falling-time-ns = <15>;
552 status = "okay";
553 };
554
555 &i2c3 {
556 i2c-scl-rising-time-ns = <450>;
557 i2c-scl-falling-time-ns = <15>;
558 status = "okay";
559 };
560
561 &i2c4 {
562 i2c-scl-rising-time-ns = <600>;
563 i2c-scl-falling-time-ns = <20>;
564 status = "okay";
565
566 fusb0: typec-portc@22 {
567 compatible = "fcs,fusb302";
568 reg = <0x22>;
569 interrupt-parent = <&gpio1>;
570 interrupts = <RK_PA2 IRQ_TYPE_LEVEL_LOW>;
571 pinctrl-names = "default";
572 pinctrl-0 = <&fusb0_int>;
573 vbus-supply = <&vcc5v0_typec>;
574 status = "okay";
575 };
576 };
577
578 &i2s0 {
579 rockchip,playback-channels = <8>;
580 rockchip,capture-channels = <8>;
581 status = "okay";
582 };
583
584 &i2s1 {
585 rockchip,playback-channels = <2>;
586 rockchip,capture-channels = <2>;
587 status = "okay";
588
589 i2s1_p0: port {
590 i2s1_p0_0: endpoint {
591 dai-format = "i2s";
592 mclk-fs = <256>;
593 remote-endpoint = <&es8316_p0_0>;
594 };
595 };
596 };
597
598 &i2s2 {
599 status = "okay";
600 };
601
602 &io_domains {
603 status = "okay";
604
605 bt656-supply = <&vcc1v8_dvp>;
606 audio-supply = <&vcc_3v0>;
607 sdmmc-supply = <&vcc_sdio>;
608 gpio1830-supply = <&vcc_3v0>;
609 };
610
611 &pcie0 {
612 ep-gpios = <&gpio2 RK_PD4 GPIO_ACTIVE_HIGH>;
613 num-lanes = <4>;
614 pinctrl-names = "default";
615 pinctrl-0 = <&pcie_perst>;
616 vpcie0v9-supply = <&vcca_0v9>;
617 vpcie1v8-supply = <&vcca_1v8>;
618 vpcie12v-supply = <&vcc12v_dcin>;
619 vpcie3v3-supply = <&vcc3v3_pcie>;
620 status = "okay";
621 };
622
623 &pcie_phy {
624 status = "okay";
625 };
626
627 &pmu_io_domains {
628 pmu1830-supply = <&vcc_3v0>;
629 status = "okay";
630 };
631
632 &pinctrl {
633 bt {
634 bt_enable_h: bt-enable-h {
635 rockchip,pins = <0 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>;
636 };
637
638 bt_host_wake_l: bt-host-wake-l {
639 rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_down>;
640 };
641
642 bt_wake_l: bt-wake-l {
643 rockchip,pins = <2 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>;
644 };
645 };
646
647 buttons {
648 pwrbtn: pwrbtn {
649 rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>;
650 };
651 };
652
653 fusb302x {
654 fusb0_int: fusb0-int {
655 rockchip,pins = <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>;
656 };
657 };
658
659 ir {
660 ir_int: ir-int {
661 rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
662 };
663 };
664
665 leds {
666 work_led_pin: work-led-pin {
667 rockchip,pins = <0 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
668 };
669
670 diy_led_pin: diy-led-pin {
671 rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
672 };
673 };
674
675 pcie {
676 pcie_perst: pcie-perst {
677 rockchip,pins = <2 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>;
678 };
679
680 pcie_pwr_en: pcie-pwr-en {
681 rockchip,pins = <1 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>;
682 };
683 };
684
685 pmic {
686 pmic_int_l: pmic-int-l {
687 rockchip,pins = <3 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>;
688 };
689
690 vsel1_pin: vsel1-pin {
691 rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_down>;
692 };
693
694 vsel2_pin: vsel2-pin {
695 rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>;
696 };
697 };
698
699 sdcard {
700 sdmmc0_pwr_h: sdmmc0-pwr-h {
701 rockchip,pins = <0 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>;
702 };
703
704 };
705
706 sdio-pwrseq {
707 wifi_enable_h: wifi-enable-h {
708 rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
709 };
710 };
711
712 usb-typec {
713 vcc5v0_typec_en: vcc5v0_typec_en {
714 rockchip,pins = <1 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
715 };
716 };
717
718 usb2 {
719 vcc5v0_host_en: vcc5v0-host-en {
720 rockchip,pins = <4 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
721 };
722 };
723 };
724
725 &pwm1 {
726 status = "okay";
727 };
728
729 &pwm2 {
730 status = "okay";
731 };
732
733 &saradc {
734 vref-supply = <&vcca1v8_s3>;
735 status = "okay";
736 };
737
738 &sdio0 {
739 bus-width = <4>;
740 cap-sd-highspeed;
741 cap-sdio-irq;
742 disable-wp;
743 keep-power-in-suspend;
744 mmc-pwrseq = <&sdio_pwrseq>;
745 non-removable;
746 pinctrl-names = "default";
747 pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk>;
748 sd-uhs-sdr104;
749 status = "okay";
750 };
751
752 &sdmmc {
753 bus-width = <4>;
754 cap-sd-highspeed;
755 cd-gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
756 disable-wp;
757 max-frequency = <150000000>;
758 pinctrl-names = "default";
759 pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_bus4>;
760 vmmc-supply = <&vcc3v0_sd>;
761 vqmmc-supply = <&vcc_sdio>;
762 status = "okay";
763 };
764
765 &sdhci {
766 bus-width = <8>;
767 mmc-hs200-1_8v;
768 non-removable;
769 status = "okay";
770 };
771
772 &spdif {
773 pinctrl-0 = <&spdif_bus_1>;
774
775 spdif_p0: port {
776 spdif_p0_0: endpoint {
777 remote-endpoint = <&dit_p0_0>;
778 };
779 };
780 };
781
782 &spi1 {
783 status = "okay";
784
785 flash@0 {
786 compatible = "jedec,spi-nor";
787 reg = <0>;
788 spi-max-frequency = <10000000>;
789 vcc-supply = <&vcc_3v0>;
790 };
791 };
792
793 &tcphy0 {
794 status = "okay";
795 };
796
797 &tcphy1 {
798 status = "okay";
799 };
800
801 &tsadc {
802 /* tshut mode 0:CRU 1:GPIO */
803 rockchip,hw-tshut-mode = <1>;
804 /* tshut polarity 0:LOW 1:HIGH */
805 rockchip,hw-tshut-polarity = <1>;
806 status = "okay";
807 };
808
809 &u2phy0 {
810 status = "okay";
811
812 u2phy0_otg: otg-port {
813 status = "okay";
814 };
815
816 u2phy0_host: host-port {
817 phy-supply = <&vcc5v0_host>;
818 status = "okay";
819 };
820 };
821
822 &u2phy1 {
823 status = "okay";
824
825 u2phy1_otg: otg-port {
826 status = "okay";
827 };
828
829 u2phy1_host: host-port {
830 phy-supply = <&vcc5v0_host>;
831 status = "okay";
832 };
833 };
834
835 &uart0 {
836 pinctrl-names = "default";
837 pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>;
838 status = "okay";
839
840 bluetooth {
841 compatible = "brcm,bcm43438-bt";
842 clocks = <&rk808 1>;
843 clock-names = "lpo";
844 device-wakeup-gpios = <&gpio2 RK_PD3 GPIO_ACTIVE_HIGH>;
845 host-wakeup-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_HIGH>;
846 shutdown-gpios = <&gpio0 RK_PB1 GPIO_ACTIVE_HIGH>;
847 pinctrl-names = "default";
848 pinctrl-0 = <&bt_host_wake_l &bt_wake_l &bt_enable_h>;
849 vbat-supply = <&vcc3v3_sys>;
850 vddio-supply = <&vcc_1v8>;
851 };
852 };
853
854 &uart2 {
855 status = "okay";
856 };
857
858 &usb_host0_ehci {
859 status = "okay";
860 };
861
862 &usb_host0_ohci {
863 status = "okay";
864 };
865
866 &usb_host1_ehci {
867 status = "okay";
868 };
869
870 &usb_host1_ohci {
871 status = "okay";
872 };
873
874 &usbdrd3_0 {
875 status = "okay";
876 };
877
878 &usbdrd_dwc3_0 {
879 status = "okay";
880 dr_mode = "host";
881 };
882
883 &usbdrd3_1 {
884 status = "okay";
885 };
886
887 &usbdrd_dwc3_1 {
888 status = "okay";
889 dr_mode = "host";
890 };
891
892 &vopb {
893 status = "okay";
894 };
895
896 &vopb_mmu {
897 status = "okay";
898 };
899
900 &vopl {
901 status = "okay";
902 };
903
904 &vopl_mmu {
905 status = "okay";
906 };