| 1 |
// SPDX-License-Identifier: (GPL-2.0+ OR MIT) |
| 2 |
/* |
| 3 |
* Copyright (c) 2017 Theobroma Systems Design und Consulting GmbH |
| 4 |
*/ |
| 5 |
|
| 6 |
#include <dt-bindings/pwm/pwm.h> |
| 7 |
#include "rk3399.dtsi" |
| 8 |
|
| 9 |
/ { |
| 10 |
aliases { |
| 11 |
ethernet0 = &gmac; |
| 12 |
i2c10 = &i2c10; |
| 13 |
mmc0 = &sdhci; |
| 14 |
}; |
| 15 |
|
| 16 |
leds { |
| 17 |
compatible = "gpio-leds"; |
| 18 |
pinctrl-names = "default"; |
| 19 |
pinctrl-0 = <&module_led_pin>; |
| 20 |
|
| 21 |
module_led: led-0 { |
| 22 |
label = "module_led"; |
| 23 |
gpios = <&gpio2 RK_PD1 GPIO_ACTIVE_HIGH>; |
| 24 |
linux,default-trigger = "heartbeat"; |
| 25 |
panic-indicator; |
| 26 |
}; |
| 27 |
}; |
| 28 |
|
| 29 |
extcon_usb3: extcon-usb3 { |
| 30 |
compatible = "linux,extcon-usb-gpio"; |
| 31 |
id-gpios = <&gpio1 RK_PC2 GPIO_ACTIVE_HIGH>; |
| 32 |
pinctrl-names = "default"; |
| 33 |
pinctrl-0 = <&usb3_id>; |
| 34 |
}; |
| 35 |
|
| 36 |
clkin_gmac: external-gmac-clock { |
| 37 |
compatible = "fixed-clock"; |
| 38 |
clock-frequency = <125000000>; |
| 39 |
clock-output-names = "clkin_gmac"; |
| 40 |
#clock-cells = <0>; |
| 41 |
}; |
| 42 |
|
| 43 |
vcc1v2_phy: regulator-vcc1v2-phy { |
| 44 |
compatible = "regulator-fixed"; |
| 45 |
regulator-name = "vcc1v2_phy"; |
| 46 |
regulator-always-on; |
| 47 |
regulator-boot-on; |
| 48 |
regulator-min-microvolt = <1200000>; |
| 49 |
regulator-max-microvolt = <1200000>; |
| 50 |
vin-supply = <&vcc5v0_sys>; |
| 51 |
}; |
| 52 |
|
| 53 |
vcc3v3_sys: regulator-vcc3v3-sys { |
| 54 |
compatible = "regulator-fixed"; |
| 55 |
regulator-name = "vcc3v3_sys"; |
| 56 |
regulator-always-on; |
| 57 |
regulator-boot-on; |
| 58 |
regulator-min-microvolt = <3300000>; |
| 59 |
regulator-max-microvolt = <3300000>; |
| 60 |
vin-supply = <&vcc5v0_sys>; |
| 61 |
}; |
| 62 |
|
| 63 |
vcc5v0_sys: regulator-vcc5v0-sys { |
| 64 |
compatible = "regulator-fixed"; |
| 65 |
regulator-name = "vcc5v0_sys"; |
| 66 |
regulator-always-on; |
| 67 |
regulator-boot-on; |
| 68 |
regulator-min-microvolt = <5000000>; |
| 69 |
regulator-max-microvolt = <5000000>; |
| 70 |
}; |
| 71 |
|
| 72 |
vcca_0v9: regulator-vcca-0v9 { |
| 73 |
compatible = "regulator-fixed"; |
| 74 |
regulator-name = "vcca_0v9"; |
| 75 |
regulator-always-on; |
| 76 |
regulator-boot-on; |
| 77 |
regulator-min-microvolt = <900000>; |
| 78 |
regulator-max-microvolt = <900000>; |
| 79 |
vin-supply = <&vcc_1v8>; |
| 80 |
}; |
| 81 |
|
| 82 |
vcca_1v8: regulator-vcca-1v8 { |
| 83 |
compatible = "regulator-fixed"; |
| 84 |
regulator-name = "vcca_1v8"; |
| 85 |
regulator-always-on; |
| 86 |
regulator-boot-on; |
| 87 |
regulator-min-microvolt = <1800000>; |
| 88 |
regulator-max-microvolt = <1800000>; |
| 89 |
vin-supply = <&vcc3v3_sys>; |
| 90 |
}; |
| 91 |
|
| 92 |
vdd_log: regulator-vdd-log { |
| 93 |
compatible = "pwm-regulator"; |
| 94 |
pwms = <&pwm2 0 25000 1>; |
| 95 |
pwm-supply = <&vcc5v0_sys>; |
| 96 |
regulator-name = "vdd_log"; |
| 97 |
regulator-min-microvolt = <800000>; |
| 98 |
regulator-max-microvolt = <1400000>; |
| 99 |
regulator-always-on; |
| 100 |
regulator-boot-on; |
| 101 |
}; |
| 102 |
}; |
| 103 |
|
| 104 |
&cpu_b0 { |
| 105 |
cpu-supply = <&vdd_cpu_b>; |
| 106 |
}; |
| 107 |
|
| 108 |
&cpu_b1 { |
| 109 |
cpu-supply = <&vdd_cpu_b>; |
| 110 |
}; |
| 111 |
|
| 112 |
&cpu_l0 { |
| 113 |
cpu-supply = <&vdd_cpu_l>; |
| 114 |
}; |
| 115 |
|
| 116 |
&cpu_l1 { |
| 117 |
cpu-supply = <&vdd_cpu_l>; |
| 118 |
}; |
| 119 |
|
| 120 |
&cpu_l2 { |
| 121 |
cpu-supply = <&vdd_cpu_l>; |
| 122 |
}; |
| 123 |
|
| 124 |
&cpu_l3 { |
| 125 |
cpu-supply = <&vdd_cpu_l>; |
| 126 |
}; |
| 127 |
|
| 128 |
&emmc_phy { |
| 129 |
status = "okay"; |
| 130 |
drive-impedance-ohm = <33>; |
| 131 |
}; |
| 132 |
|
| 133 |
&gpio0 { |
| 134 |
/* |
| 135 |
* The BIOS_DISABLE hog is a feedback pin for the actual status of the |
| 136 |
* signal. This usually represents the state of a switch on the baseboard. |
| 137 |
* The pin has a 10k pull-up resistor connected, so no pull-up setting is needed. |
| 138 |
*/ |
| 139 |
bios-disable-hog { |
| 140 |
gpios = <RK_PB0 GPIO_ACTIVE_HIGH>; |
| 141 |
gpio-hog; |
| 142 |
input; |
| 143 |
line-name = "bios_disable"; |
| 144 |
}; |
| 145 |
}; |
| 146 |
|
| 147 |
&gpio3 { |
| 148 |
/* |
| 149 |
* The Qseven BIOS_DISABLE signal on the RK3399-Q7 keeps the on-module |
| 150 |
* eMMC and SPI flash powered-down initially (in fact it keeps the |
| 151 |
* reset signal asserted). BIOS_DISABLE_OVERRIDE pin allows to override |
| 152 |
* that signal so that eMMC and SPI can be used regardless of the state |
| 153 |
* of the signal. |
| 154 |
*/ |
| 155 |
bios-disable-override-hog { |
| 156 |
gpios = <RK_PD5 GPIO_ACTIVE_LOW>; |
| 157 |
gpio-hog; |
| 158 |
line-name = "bios_disable_override"; |
| 159 |
output-high; |
| 160 |
}; |
| 161 |
}; |
| 162 |
|
| 163 |
&gmac { |
| 164 |
assigned-clocks = <&cru SCLK_RMII_SRC>; |
| 165 |
assigned-clock-parents = <&clkin_gmac>; |
| 166 |
clock_in_out = "input"; |
| 167 |
phy-supply = <&vcc1v2_phy>; |
| 168 |
phy-mode = "rgmii"; |
| 169 |
pinctrl-names = "default"; |
| 170 |
pinctrl-0 = <&rgmii_pins>; |
| 171 |
snps,reset-gpio = <&gpio3 RK_PC0 GPIO_ACTIVE_LOW>; |
| 172 |
snps,reset-active-low; |
| 173 |
snps,reset-delays-us = <0 10000 50000>; |
| 174 |
tx_delay = <0x10>; |
| 175 |
rx_delay = <0x23>; |
| 176 |
}; |
| 177 |
|
| 178 |
&gpu { |
| 179 |
mali-supply = <&vdd_gpu>; |
| 180 |
status = "okay"; |
| 181 |
}; |
| 182 |
|
| 183 |
&i2c0 { |
| 184 |
status = "okay"; |
| 185 |
i2c-scl-rising-time-ns = <168>; |
| 186 |
i2c-scl-falling-time-ns = <4>; |
| 187 |
clock-frequency = <400000>; |
| 188 |
|
| 189 |
rk808: pmic@1b { |
| 190 |
compatible = "rockchip,rk808"; |
| 191 |
reg = <0x1b>; |
| 192 |
interrupt-parent = <&gpio1>; |
| 193 |
interrupts = <22 IRQ_TYPE_LEVEL_LOW>; |
| 194 |
#clock-cells = <1>; |
| 195 |
clock-output-names = "xin32k", "rk808-clkout2"; |
| 196 |
pinctrl-names = "default"; |
| 197 |
pinctrl-0 = <&pmic_int_l>; |
| 198 |
system-power-controller; |
| 199 |
wakeup-source; |
| 200 |
|
| 201 |
vcc1-supply = <&vcc5v0_sys>; |
| 202 |
vcc2-supply = <&vcc5v0_sys>; |
| 203 |
vcc3-supply = <&vcc5v0_sys>; |
| 204 |
vcc4-supply = <&vcc5v0_sys>; |
| 205 |
vcc6-supply = <&vcc5v0_sys>; |
| 206 |
vcc7-supply = <&vcc5v0_sys>; |
| 207 |
vcc8-supply = <&vcc3v3_sys>; |
| 208 |
vcc9-supply = <&vcc5v0_sys>; |
| 209 |
vcc10-supply = <&vcc5v0_sys>; |
| 210 |
vcc11-supply = <&vcc5v0_sys>; |
| 211 |
vcc12-supply = <&vcc3v3_sys>; |
| 212 |
vddio-supply = <&vcc1v8_pmu>; |
| 213 |
|
| 214 |
regulators { |
| 215 |
vdd_center: DCDC_REG1 { |
| 216 |
regulator-name = "vdd_center"; |
| 217 |
regulator-min-microvolt = <750000>; |
| 218 |
regulator-max-microvolt = <1350000>; |
| 219 |
regulator-ramp-delay = <6001>; |
| 220 |
regulator-always-on; |
| 221 |
regulator-boot-on; |
| 222 |
regulator-state-mem { |
| 223 |
regulator-off-in-suspend; |
| 224 |
}; |
| 225 |
}; |
| 226 |
|
| 227 |
vdd_cpu_l: DCDC_REG2 { |
| 228 |
regulator-name = "vdd_cpu_l"; |
| 229 |
regulator-min-microvolt = <750000>; |
| 230 |
regulator-max-microvolt = <1350000>; |
| 231 |
regulator-ramp-delay = <6001>; |
| 232 |
regulator-always-on; |
| 233 |
regulator-boot-on; |
| 234 |
regulator-state-mem { |
| 235 |
regulator-off-in-suspend; |
| 236 |
}; |
| 237 |
}; |
| 238 |
|
| 239 |
vcc_ddr: DCDC_REG3 { |
| 240 |
regulator-name = "vcc_ddr"; |
| 241 |
regulator-always-on; |
| 242 |
regulator-boot-on; |
| 243 |
regulator-state-mem { |
| 244 |
regulator-on-in-suspend; |
| 245 |
}; |
| 246 |
}; |
| 247 |
|
| 248 |
vcc_1v8: DCDC_REG4 { |
| 249 |
regulator-name = "vcc_1v8"; |
| 250 |
regulator-min-microvolt = <1800000>; |
| 251 |
regulator-max-microvolt = <1800000>; |
| 252 |
regulator-always-on; |
| 253 |
regulator-boot-on; |
| 254 |
regulator-state-mem { |
| 255 |
regulator-on-in-suspend; |
| 256 |
regulator-suspend-microvolt = <1800000>; |
| 257 |
}; |
| 258 |
}; |
| 259 |
|
| 260 |
vcc_ldo1: LDO_REG1 { |
| 261 |
regulator-name = "vcc_ldo1"; |
| 262 |
regulator-min-microvolt = <1800000>; |
| 263 |
regulator-max-microvolt = <1800000>; |
| 264 |
regulator-boot-on; |
| 265 |
regulator-state-mem { |
| 266 |
regulator-off-in-suspend; |
| 267 |
}; |
| 268 |
}; |
| 269 |
|
| 270 |
vcc1v8_hdmi: LDO_REG2 { |
| 271 |
regulator-name = "vcc1v8_hdmi"; |
| 272 |
regulator-min-microvolt = <1800000>; |
| 273 |
regulator-max-microvolt = <1800000>; |
| 274 |
regulator-always-on; |
| 275 |
regulator-boot-on; |
| 276 |
regulator-state-mem { |
| 277 |
regulator-off-in-suspend; |
| 278 |
}; |
| 279 |
}; |
| 280 |
|
| 281 |
vcc1v8_pmu: LDO_REG3 { |
| 282 |
regulator-name = "vcc1v8_pmu"; |
| 283 |
regulator-min-microvolt = <1800000>; |
| 284 |
regulator-max-microvolt = <1800000>; |
| 285 |
regulator-always-on; |
| 286 |
regulator-boot-on; |
| 287 |
regulator-state-mem { |
| 288 |
regulator-on-in-suspend; |
| 289 |
regulator-suspend-microvolt = <1800000>; |
| 290 |
}; |
| 291 |
}; |
| 292 |
|
| 293 |
vcc_sd: LDO_REG4 { |
| 294 |
regulator-name = "vcc_sd"; |
| 295 |
regulator-min-microvolt = <1800000>; |
| 296 |
regulator-max-microvolt = <3000000>; |
| 297 |
regulator-always-on; |
| 298 |
regulator-boot-on; |
| 299 |
regulator-state-mem { |
| 300 |
regulator-on-in-suspend; |
| 301 |
regulator-suspend-microvolt = <3000000>; |
| 302 |
}; |
| 303 |
}; |
| 304 |
|
| 305 |
vcc_ldo5: LDO_REG5 { |
| 306 |
regulator-name = "vcc_ldo5"; |
| 307 |
regulator-min-microvolt = <3000000>; |
| 308 |
regulator-max-microvolt = <3000000>; |
| 309 |
regulator-boot-on; |
| 310 |
regulator-state-mem { |
| 311 |
regulator-off-in-suspend; |
| 312 |
}; |
| 313 |
}; |
| 314 |
|
| 315 |
vcc_ldo6: LDO_REG6 { |
| 316 |
regulator-name = "vcc_ldo6"; |
| 317 |
regulator-min-microvolt = <1500000>; |
| 318 |
regulator-max-microvolt = <1500000>; |
| 319 |
regulator-boot-on; |
| 320 |
regulator-state-mem { |
| 321 |
regulator-off-in-suspend; |
| 322 |
}; |
| 323 |
}; |
| 324 |
|
| 325 |
vcc0v9_hdmi: LDO_REG7 { |
| 326 |
regulator-name = "vcc0v9_hdmi"; |
| 327 |
regulator-min-microvolt = <900000>; |
| 328 |
regulator-max-microvolt = <900000>; |
| 329 |
regulator-always-on; |
| 330 |
regulator-boot-on; |
| 331 |
regulator-state-mem { |
| 332 |
regulator-off-in-suspend; |
| 333 |
}; |
| 334 |
}; |
| 335 |
|
| 336 |
vcc_efuse: LDO_REG8 { |
| 337 |
regulator-name = "vcc_efuse"; |
| 338 |
regulator-min-microvolt = <1800000>; |
| 339 |
regulator-max-microvolt = <1800000>; |
| 340 |
regulator-always-on; |
| 341 |
regulator-boot-on; |
| 342 |
regulator-state-mem { |
| 343 |
regulator-off-in-suspend; |
| 344 |
}; |
| 345 |
}; |
| 346 |
|
| 347 |
vcc3v3_s3: SWITCH_REG1 { |
| 348 |
regulator-name = "vcc3v3_s3"; |
| 349 |
regulator-always-on; |
| 350 |
regulator-boot-on; |
| 351 |
regulator-state-mem { |
| 352 |
regulator-off-in-suspend; |
| 353 |
}; |
| 354 |
}; |
| 355 |
|
| 356 |
vcc3v3_s0: SWITCH_REG2 { |
| 357 |
regulator-name = "vcc3v3_s0"; |
| 358 |
regulator-always-on; |
| 359 |
regulator-boot-on; |
| 360 |
regulator-state-mem { |
| 361 |
regulator-off-in-suspend; |
| 362 |
}; |
| 363 |
}; |
| 364 |
}; |
| 365 |
}; |
| 366 |
|
| 367 |
vdd_gpu: regulator@60 { |
| 368 |
compatible = "fcs,fan53555"; |
| 369 |
reg = <0x60>; |
| 370 |
fcs,suspend-voltage-selector = <1>; |
| 371 |
regulator-name = "vdd_gpu"; |
| 372 |
regulator-min-microvolt = <600000>; |
| 373 |
regulator-max-microvolt = <1230000>; |
| 374 |
regulator-ramp-delay = <1000>; |
| 375 |
regulator-always-on; |
| 376 |
regulator-boot-on; |
| 377 |
vin-supply = <&vcc5v0_sys>; |
| 378 |
}; |
| 379 |
}; |
| 380 |
|
| 381 |
&hdmi { |
| 382 |
ddc-i2c-bus = <&i2c3>; |
| 383 |
}; |
| 384 |
|
| 385 |
&i2c6 { |
| 386 |
clock-frequency = <400000>; |
| 387 |
}; |
| 388 |
|
| 389 |
&i2c7 { |
| 390 |
status = "okay"; |
| 391 |
clock-frequency = <400000>; |
| 392 |
|
| 393 |
fan: fan@18 { |
| 394 |
compatible = "tsd,mule", "ti,amc6821"; |
| 395 |
reg = <0x18>; |
| 396 |
|
| 397 |
i2c-mux { |
| 398 |
compatible = "tsd,mule-i2c-mux"; |
| 399 |
#address-cells = <1>; |
| 400 |
#size-cells = <0>; |
| 401 |
|
| 402 |
i2c10: i2c@0 { |
| 403 |
reg = <0x0>; |
| 404 |
#address-cells = <1>; |
| 405 |
#size-cells = <0>; |
| 406 |
|
| 407 |
rtc_twi: rtc@6f { |
| 408 |
compatible = "isil,isl1208"; |
| 409 |
reg = <0x6f>; |
| 410 |
}; |
| 411 |
}; |
| 412 |
}; |
| 413 |
}; |
| 414 |
}; |
| 415 |
|
| 416 |
&i2c8 { |
| 417 |
status = "okay"; |
| 418 |
clock-frequency = <400000>; |
| 419 |
|
| 420 |
vdd_cpu_b: regulator@60 { |
| 421 |
compatible = "fcs,fan53555"; |
| 422 |
reg = <0x60>; |
| 423 |
vin-supply = <&vcc5v0_sys>; |
| 424 |
regulator-name = "vdd_cpu_b"; |
| 425 |
regulator-min-microvolt = <600000>; |
| 426 |
regulator-max-microvolt = <1230000>; |
| 427 |
regulator-ramp-delay = <1000>; |
| 428 |
fcs,suspend-voltage-selector = <1>; |
| 429 |
regulator-always-on; |
| 430 |
regulator-boot-on; |
| 431 |
}; |
| 432 |
}; |
| 433 |
|
| 434 |
&i2s0 { |
| 435 |
pinctrl-0 = <&i2s0_2ch_bus>; |
| 436 |
pinctrl-1 = <&i2s0_2ch_bus_bclk_off>; |
| 437 |
rockchip,playback-channels = <2>; |
| 438 |
rockchip,capture-channels = <2>; |
| 439 |
}; |
| 440 |
|
| 441 |
/* |
| 442 |
* As Q7 does not specify neither a global nor a RX clock for I2S these |
| 443 |
* signals are not used. Furthermore I2S0_LRCK_RX is used as GPIO. |
| 444 |
* Therefore we have to redefine the i2s0_2ch_bus and i2s0_2ch_bus_bclk_off |
| 445 |
* definitions to prevent conflicts. |
| 446 |
*/ |
| 447 |
&i2s0_2ch_bus { |
| 448 |
rockchip,pins = |
| 449 |
<3 RK_PD0 1 &pcfg_pull_none>, |
| 450 |
<3 RK_PD2 1 &pcfg_pull_none>, |
| 451 |
<3 RK_PD3 1 &pcfg_pull_none>, |
| 452 |
<3 RK_PD7 1 &pcfg_pull_none>; |
| 453 |
}; |
| 454 |
|
| 455 |
&i2s0_2ch_bus_bclk_off { |
| 456 |
rockchip,pins = |
| 457 |
<3 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>, |
| 458 |
<3 RK_PD2 1 &pcfg_pull_none>, |
| 459 |
<3 RK_PD3 1 &pcfg_pull_none>, |
| 460 |
<3 RK_PD7 1 &pcfg_pull_none>; |
| 461 |
}; |
| 462 |
|
| 463 |
&io_domains { |
| 464 |
status = "okay"; |
| 465 |
bt656-supply = <&vcc_1v8>; |
| 466 |
audio-supply = <&vcc_1v8>; |
| 467 |
sdmmc-supply = <&vcc_sd>; |
| 468 |
gpio1830-supply = <&vcc_1v8>; |
| 469 |
}; |
| 470 |
|
| 471 |
&pcie0 { |
| 472 |
/* PCIe PHY supplies */ |
| 473 |
vpcie0v9-supply = <&vcca_0v9>; |
| 474 |
vpcie1v8-supply = <&vcca_1v8>; |
| 475 |
}; |
| 476 |
|
| 477 |
&pcie_clkreqn_cpm { |
| 478 |
rockchip,pins = |
| 479 |
<2 RK_PD2 RK_FUNC_GPIO &pcfg_pull_up>; |
| 480 |
}; |
| 481 |
|
| 482 |
&pinctrl { |
| 483 |
pinctrl-names = "default"; |
| 484 |
pinctrl-0 = <&q7_thermal_pin &bios_disable_override_hog_pin>; |
| 485 |
|
| 486 |
gpio-pins { |
| 487 |
bios_disable_override_hog_pin: bios-disable-override-hog-pin { |
| 488 |
rockchip,pins = |
| 489 |
<3 RK_PD5 RK_FUNC_GPIO &pcfg_pull_down>; |
| 490 |
}; |
| 491 |
|
| 492 |
q7_thermal_pin: q7-thermal-pin { |
| 493 |
rockchip,pins = |
| 494 |
<0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>; |
| 495 |
}; |
| 496 |
}; |
| 497 |
|
| 498 |
i2c8 { |
| 499 |
i2c8_xfer_a: i2c8-xfer { |
| 500 |
rockchip,pins = |
| 501 |
<1 RK_PC4 1 &pcfg_pull_up>, |
| 502 |
<1 RK_PC5 1 &pcfg_pull_up>; |
| 503 |
}; |
| 504 |
}; |
| 505 |
|
| 506 |
leds { |
| 507 |
module_led_pin: module-led-pin { |
| 508 |
rockchip,pins = |
| 509 |
<2 RK_PD1 RK_FUNC_GPIO &pcfg_pull_none>; |
| 510 |
}; |
| 511 |
}; |
| 512 |
|
| 513 |
pmic { |
| 514 |
pmic_int_l: pmic-int-l { |
| 515 |
rockchip,pins = |
| 516 |
<1 RK_PC6 RK_FUNC_GPIO &pcfg_pull_up>; |
| 517 |
}; |
| 518 |
}; |
| 519 |
|
| 520 |
usb { |
| 521 |
cy3304_reset: cy3304-reset { |
| 522 |
rockchip,pins = |
| 523 |
<4 RK_PA3 RK_FUNC_GPIO &pcfg_output_high>; |
| 524 |
}; |
| 525 |
}; |
| 526 |
|
| 527 |
usb3 { |
| 528 |
usb3_id: usb3-id { |
| 529 |
rockchip,pins = |
| 530 |
<1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_up>; |
| 531 |
}; |
| 532 |
}; |
| 533 |
}; |
| 534 |
|
| 535 |
&pmu_io_domains { |
| 536 |
status = "okay"; |
| 537 |
pmu1830-supply = <&vcc_1v8>; |
| 538 |
}; |
| 539 |
|
| 540 |
&pwm2 { |
| 541 |
status = "okay"; |
| 542 |
}; |
| 543 |
|
| 544 |
&sdhci { |
| 545 |
/* |
| 546 |
* Signal integrity isn't great at 200MHz but 100MHz has proven stable |
| 547 |
* enough. |
| 548 |
*/ |
| 549 |
max-frequency = <100000000>; |
| 550 |
|
| 551 |
bus-width = <8>; |
| 552 |
mmc-hs400-1_8v; |
| 553 |
mmc-hs400-enhanced-strobe; |
| 554 |
non-removable; |
| 555 |
status = "okay"; |
| 556 |
}; |
| 557 |
|
| 558 |
&sdmmc { |
| 559 |
vqmmc-supply = <&vcc_sd>; |
| 560 |
}; |
| 561 |
|
| 562 |
&spi1 { |
| 563 |
status = "okay"; |
| 564 |
|
| 565 |
norflash: flash@0 { |
| 566 |
compatible = "jedec,spi-nor"; |
| 567 |
reg = <0>; |
| 568 |
spi-max-frequency = <50000000>; |
| 569 |
}; |
| 570 |
}; |
| 571 |
|
| 572 |
&tcphy1 { |
| 573 |
status = "okay"; |
| 574 |
}; |
| 575 |
|
| 576 |
&tsadc { |
| 577 |
rockchip,hw-tshut-mode = <1>; |
| 578 |
rockchip,hw-tshut-polarity = <1>; |
| 579 |
status = "okay"; |
| 580 |
}; |
| 581 |
|
| 582 |
&u2phy1 { |
| 583 |
status = "okay"; |
| 584 |
|
| 585 |
u2phy1_otg: otg-port { |
| 586 |
status = "okay"; |
| 587 |
}; |
| 588 |
}; |
| 589 |
|
| 590 |
&usbdrd3_1 { |
| 591 |
status = "okay"; |
| 592 |
}; |
| 593 |
|
| 594 |
&usbdrd_dwc3_1 { |
| 595 |
status = "okay"; |
| 596 |
dr_mode = "host"; |
| 597 |
pinctrl-names = "default"; |
| 598 |
pinctrl-0 = <&cy3304_reset>; |
| 599 |
#address-cells = <1>; |
| 600 |
#size-cells = <0>; |
| 601 |
|
| 602 |
hub_2_0: hub@1 { |
| 603 |
compatible = "usb4b4,6502", "usb4b4,6506"; |
| 604 |
reg = <1>; |
| 605 |
peer-hub = <&hub_3_0>; |
| 606 |
reset-gpios = <&gpio4 RK_PA3 GPIO_ACTIVE_HIGH>; |
| 607 |
vdd-supply = <&vcc1v2_phy>; |
| 608 |
vdd2-supply = <&vcc3v3_sys>; |
| 609 |
|
| 610 |
}; |
| 611 |
|
| 612 |
hub_3_0: hub@2 { |
| 613 |
compatible = "usb4b4,6500", "usb4b4,6504"; |
| 614 |
reg = <2>; |
| 615 |
peer-hub = <&hub_2_0>; |
| 616 |
reset-gpios = <&gpio4 RK_PA3 GPIO_ACTIVE_HIGH>; |
| 617 |
vdd-supply = <&vcc1v2_phy>; |
| 618 |
vdd2-supply = <&vcc3v3_sys>; |
| 619 |
}; |
| 620 |
}; |