Debian Codegraph @

scripts/dtc/include-prefixes/arm64/rockchip/rk3399-puma-haikou.dts

raw
1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
2 /*
3 * Copyright (c) 2017 Theobroma Systems Design und Consulting GmbH
4 */
5
6 /dts-v1/;
7 #include "rk3399-puma.dtsi"
8 #include <dt-bindings/input/input.h>
9
10 / {
11 model = "Theobroma Systems RK3399-Q7 SoM";
12 compatible = "tsd,rk3399-puma-haikou", "rockchip,rk3399";
13
14 aliases {
15 mmc1 = &sdmmc;
16 };
17
18 chosen {
19 stdout-path = "serial0:115200n8";
20 };
21
22 gpio-keys {
23 compatible = "gpio-keys";
24 pinctrl-0 = <&haikou_keys_pin>;
25 pinctrl-names = "default";
26
27 button-batlow-n {
28 gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>;
29 label = "BATLOW#";
30 linux,code = <KEY_BATTERY>;
31 };
32
33 button-pwrbtn-n {
34 gpios = <&gpio0 RK_PA1 GPIO_ACTIVE_LOW>;
35 label = "PWRBTN#";
36 linux,code = <KEY_POWER>;
37 };
38
39 button-slp-btn-n {
40 gpios = <&gpio0 RK_PB3 GPIO_ACTIVE_LOW>;
41 label = "SLP_BTN#";
42 linux,code = <KEY_SLEEP>;
43 };
44
45 button-wake-n {
46 gpios = <&gpio0 RK_PB1 GPIO_ACTIVE_LOW>;
47 label = "WAKE#";
48 linux,code = <KEY_WAKEUP>;
49 wakeup-source;
50 };
51
52 switch-lid-btn-n {
53 gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>;
54 label = "LID_BTN#";
55 linux,code = <SW_LID>;
56 linux,input-type = <EV_SW>;
57 };
58 };
59
60 leds {
61 pinctrl-0 = <&module_led_pin>, <&sd_card_led_pin>;
62
63 sd_card_led: led-1 {
64 label = "sd_card_led";
65 gpios = <&gpio1 RK_PA2 GPIO_ACTIVE_HIGH>;
66 linux,default-trigger = "mmc0";
67 };
68 };
69
70 i2s0-sound {
71 compatible = "simple-audio-card";
72 simple-audio-card,format = "i2s";
73 simple-audio-card,name = "Haikou,I2S-codec";
74 simple-audio-card,mclk-fs = <512>;
75
76 simple-audio-card,codec {
77 clocks = <&sgtl5000_clk>;
78 sound-dai = <&sgtl5000>;
79 };
80
81 simple-audio-card,cpu {
82 bitclock-master;
83 frame-master;
84 sound-dai = <&i2s0>;
85 };
86 };
87
88 sgtl5000_clk: sgtl5000-oscillator {
89 compatible = "fixed-clock";
90 #clock-cells = <0>;
91 clock-frequency = <24576000>;
92 };
93
94 dc_12v: regulator-dc-12v {
95 compatible = "regulator-fixed";
96 regulator-name = "dc_12v";
97 regulator-always-on;
98 regulator-boot-on;
99 regulator-min-microvolt = <12000000>;
100 regulator-max-microvolt = <12000000>;
101 };
102
103 vcc3v3_baseboard: regulator-vcc3v3-baseboard {
104 compatible = "regulator-fixed";
105 regulator-name = "vcc3v3_baseboard";
106 regulator-always-on;
107 regulator-boot-on;
108 regulator-min-microvolt = <3300000>;
109 regulator-max-microvolt = <3300000>;
110 vin-supply = <&dc_12v>;
111 };
112
113 vcc5v0_baseboard: regulator-vcc5v0-baseboard {
114 compatible = "regulator-fixed";
115 regulator-name = "vcc5v0_baseboard";
116 regulator-always-on;
117 regulator-boot-on;
118 regulator-min-microvolt = <5000000>;
119 regulator-max-microvolt = <5000000>;
120 vin-supply = <&dc_12v>;
121 };
122
123 vcc5v0_otg: regulator-vcc5v0-otg {
124 compatible = "regulator-fixed";
125 enable-active-high;
126 gpio = <&gpio0 RK_PA2 GPIO_ACTIVE_HIGH>;
127 pinctrl-names = "default";
128 pinctrl-0 = <&otg_vbus_drv>;
129 regulator-name = "vcc5v0_otg";
130 regulator-always-on;
131 };
132
133 vdda_codec: regulator-vdda-codec {
134 compatible = "regulator-fixed";
135 regulator-name = "vdda_codec";
136 regulator-boot-on;
137 regulator-min-microvolt = <3300000>;
138 regulator-max-microvolt = <3300000>;
139 vin-supply = <&vcc5v0_baseboard>;
140 };
141
142 vddd_codec: regulator-vddd-codec {
143 compatible = "regulator-fixed";
144 regulator-name = "vddd_codec";
145 regulator-boot-on;
146 regulator-min-microvolt = <1600000>;
147 regulator-max-microvolt = <1600000>;
148 vin-supply = <&vcc5v0_baseboard>;
149 };
150 };
151
152 &gmac {
153 status = "okay";
154 };
155
156 &hdmi {
157 status = "okay";
158 };
159
160 &hdmi_sound {
161 status = "okay";
162 };
163
164 &i2c1 {
165 status = "okay";
166 clock-frequency = <400000>;
167 };
168
169 &i2c2 {
170 status = "okay";
171 clock-frequency = <400000>;
172 };
173
174 &i2c3 {
175 i2c-scl-rising-time-ns = <450>;
176 i2c-scl-falling-time-ns = <15>;
177 status = "okay";
178 };
179
180 &i2c4 {
181 status = "okay";
182 clock-frequency = <400000>;
183
184 sgtl5000: codec@a {
185 compatible = "fsl,sgtl5000";
186 reg = <0x0a>;
187 clocks = <&sgtl5000_clk>;
188 #sound-dai-cells = <0>;
189 VDDA-supply = <&vdda_codec>;
190 VDDIO-supply = <&vdda_codec>;
191 VDDD-supply = <&vddd_codec>;
192 status = "okay";
193 };
194 };
195
196 &i2c7 {
197 eeprom@50 {
198 reg = <0x50>;
199 compatible = "atmel,24c01";
200 pagesize = <8>;
201 size = <128>;
202 vcc-supply = <&vcc3v3_baseboard>;
203 };
204 };
205
206 &i2s0 {
207 status = "okay";
208 };
209
210 &i2s2 {
211 status = "okay";
212 };
213
214 &pcie_phy {
215 status = "okay";
216 };
217
218 &pcie0 {
219 ep-gpios = <&gpio4 RK_PC6 GPIO_ACTIVE_HIGH>;
220 num-lanes = <4>;
221 pinctrl-names = "default";
222 pinctrl-0 = <&pcie_clkreqn_cpm>;
223 vpcie3v3-supply = <&vcc3v3_baseboard>;
224 vpcie12v-supply = <&dc_12v>;
225 status = "okay";
226 };
227
228 &pinctrl {
229 buttons {
230 haikou_keys_pin: haikou-keys-pin {
231 rockchip,pins =
232 /* PWRBTN# */
233 <0 RK_PA1 RK_FUNC_GPIO &pcfg_pull_up>,
234 /* LID_BTN */
235 <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>,
236 /* BATLOW# */
237 <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>,
238 /* SLP_BTN# */
239 <0 RK_PB3 RK_FUNC_GPIO &pcfg_pull_up>,
240 /* WAKE# */
241 <0 RK_PB1 RK_FUNC_GPIO &pcfg_pull_up>;
242 };
243 };
244
245 leds {
246 sd_card_led_pin: sd-card-led-pin {
247 rockchip,pins =
248 <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
249 };
250 };
251
252 usb2 {
253 otg_vbus_drv: otg-vbus-drv {
254 rockchip,pins =
255 <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
256 };
257 };
258 };
259
260 &pwm0 {
261 status = "okay";
262 };
263
264 &sdmmc {
265 bus-width = <4>;
266 cap-mmc-highspeed;
267 cap-sd-highspeed;
268 cd-gpios = <&gpio0 RK_PA7 GPIO_ACTIVE_LOW>;
269 disable-wp;
270 max-frequency = <40000000>;
271 pinctrl-names = "default";
272 pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>;
273 vmmc-supply = <&vcc3v3_baseboard>;
274 status = "okay";
275 };
276
277 &spi5 {
278 status = "okay";
279 };
280
281 &tcphy0 {
282 status = "okay";
283 };
284
285 &u2phy0 {
286 status = "okay";
287 };
288
289 &usbdrd3_0 {
290 status = "okay";
291 };
292
293 &usbdrd_dwc3_0 {
294 dr_mode = "otg";
295 extcon = <&extcon_usb3>;
296 status = "okay";
297 };
298
299 &u2phy0_host {
300 phy-supply = <&vcc5v0_otg>;
301 status = "okay";
302 };
303
304 &uart0 {
305 pinctrl-names = "default";
306 pinctrl-0 = <&uart0_xfer>;
307 status = "okay";
308 };
309
310 &uart2 {
311 rts-gpios = <&gpio2 RK_PC3 GPIO_ACTIVE_HIGH>;
312 status = "okay";
313 };
314
315 &vopb {
316 status = "okay";
317 };
318
319 &vopb_mmu {
320 status = "okay";
321 };
322
323 &vopl {
324 status = "okay";
325 };
326
327 &vopl_mmu {
328 status = "okay";
329 };