| 1 |
// SPDX-License-Identifier: (GPL-2.0+ OR MIT) |
| 2 |
/* |
| 3 |
* RK3399-based FriendlyElec boards device tree source |
| 4 |
* |
| 5 |
* Copyright (c) 2016 Fuzhou Rockchip Electronics Co., Ltd |
| 6 |
* |
| 7 |
* Copyright (c) 2018 FriendlyElec Computer Tech. Co., Ltd. |
| 8 |
* (http://www.friendlyarm.com) |
| 9 |
* |
| 10 |
* Copyright (c) 2018 Collabora Ltd. |
| 11 |
* Copyright (c) 2019 Arm Ltd. |
| 12 |
*/ |
| 13 |
|
| 14 |
/dts-v1/; |
| 15 |
#include <dt-bindings/input/linux-event-codes.h> |
| 16 |
#include "rk3399.dtsi" |
| 17 |
|
| 18 |
/ { |
| 19 |
aliases { |
| 20 |
ethernet0 = &gmac; |
| 21 |
mmc0 = &sdio0; |
| 22 |
mmc1 = &sdmmc; |
| 23 |
mmc2 = &sdhci; |
| 24 |
}; |
| 25 |
|
| 26 |
chosen { |
| 27 |
stdout-path = "serial2:1500000n8"; |
| 28 |
}; |
| 29 |
|
| 30 |
clkin_gmac: external-gmac-clock { |
| 31 |
compatible = "fixed-clock"; |
| 32 |
clock-frequency = <125000000>; |
| 33 |
clock-output-names = "clkin_gmac"; |
| 34 |
#clock-cells = <0>; |
| 35 |
}; |
| 36 |
|
| 37 |
vcc3v3_sys: regulator-vcc3v3-sys { |
| 38 |
compatible = "regulator-fixed"; |
| 39 |
regulator-always-on; |
| 40 |
regulator-boot-on; |
| 41 |
regulator-min-microvolt = <3300000>; |
| 42 |
regulator-max-microvolt = <3300000>; |
| 43 |
regulator-name = "vcc3v3_sys"; |
| 44 |
}; |
| 45 |
|
| 46 |
vcc5v0_sys: regulator-vcc5v0-sys { |
| 47 |
compatible = "regulator-fixed"; |
| 48 |
regulator-always-on; |
| 49 |
regulator-boot-on; |
| 50 |
regulator-min-microvolt = <5000000>; |
| 51 |
regulator-max-microvolt = <5000000>; |
| 52 |
regulator-name = "vcc5v0_sys"; |
| 53 |
vin-supply = <&vdd_5v>; |
| 54 |
}; |
| 55 |
|
| 56 |
/* switched by pmic_sleep */ |
| 57 |
vcc1v8_s3: regulator-vcc1v8-s3 { |
| 58 |
compatible = "regulator-fixed"; |
| 59 |
regulator-always-on; |
| 60 |
regulator-boot-on; |
| 61 |
regulator-min-microvolt = <1800000>; |
| 62 |
regulator-max-microvolt = <1800000>; |
| 63 |
regulator-name = "vcc1v8_s3"; |
| 64 |
vin-supply = <&vcc_1v8>; |
| 65 |
}; |
| 66 |
|
| 67 |
vcc3v0_sd: regulator-vcc3v0-sd { |
| 68 |
compatible = "regulator-fixed"; |
| 69 |
enable-active-high; |
| 70 |
gpio = <&gpio0 RK_PA1 GPIO_ACTIVE_HIGH>; |
| 71 |
pinctrl-names = "default"; |
| 72 |
pinctrl-0 = <&sdmmc0_pwr_h>; |
| 73 |
regulator-always-on; |
| 74 |
regulator-min-microvolt = <3000000>; |
| 75 |
regulator-max-microvolt = <3000000>; |
| 76 |
regulator-name = "vcc3v0_sd"; |
| 77 |
vin-supply = <&vcc3v3_sys>; |
| 78 |
}; |
| 79 |
|
| 80 |
/* |
| 81 |
* Really, this is supplied by vcc_1v8, and vcc1v8_s3 only |
| 82 |
* drives the enable pin, but we can't quite model that. |
| 83 |
*/ |
| 84 |
vcca0v9_s3: regulator-vcca0v9-s3 { |
| 85 |
compatible = "regulator-fixed"; |
| 86 |
regulator-min-microvolt = <900000>; |
| 87 |
regulator-max-microvolt = <900000>; |
| 88 |
regulator-name = "vcca0v9_s3"; |
| 89 |
vin-supply = <&vcc1v8_s3>; |
| 90 |
}; |
| 91 |
|
| 92 |
/* As above, actually supplied by vcc3v3_sys */ |
| 93 |
vcca1v8_s3: regulator-vcca1v8-s3 { |
| 94 |
compatible = "regulator-fixed"; |
| 95 |
regulator-min-microvolt = <1800000>; |
| 96 |
regulator-max-microvolt = <1800000>; |
| 97 |
regulator-name = "vcca1v8_s3"; |
| 98 |
vin-supply = <&vcc1v8_s3>; |
| 99 |
}; |
| 100 |
|
| 101 |
vbus_typec: regulator-vbus-typec { |
| 102 |
compatible = "regulator-fixed"; |
| 103 |
regulator-min-microvolt = <5000000>; |
| 104 |
regulator-max-microvolt = <5000000>; |
| 105 |
regulator-name = "vbus_typec"; |
| 106 |
}; |
| 107 |
|
| 108 |
gpio-keys { |
| 109 |
compatible = "gpio-keys"; |
| 110 |
autorepeat; |
| 111 |
pinctrl-names = "default"; |
| 112 |
pinctrl-0 = <&power_key>; |
| 113 |
|
| 114 |
key-power { |
| 115 |
debounce-interval = <100>; |
| 116 |
gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>; |
| 117 |
label = "GPIO Key Power"; |
| 118 |
linux,code = <KEY_POWER>; |
| 119 |
wakeup-source; |
| 120 |
}; |
| 121 |
}; |
| 122 |
|
| 123 |
leds: gpio-leds { |
| 124 |
compatible = "gpio-leds"; |
| 125 |
pinctrl-names = "default"; |
| 126 |
pinctrl-0 = <&status_led_pin>; |
| 127 |
|
| 128 |
status_led: led-0 { |
| 129 |
gpios = <&gpio0 RK_PB5 GPIO_ACTIVE_HIGH>; |
| 130 |
label = "status_led"; |
| 131 |
linux,default-trigger = "heartbeat"; |
| 132 |
}; |
| 133 |
}; |
| 134 |
|
| 135 |
sdio_pwrseq: sdio-pwrseq { |
| 136 |
compatible = "mmc-pwrseq-simple"; |
| 137 |
clocks = <&rk808 1>; |
| 138 |
clock-names = "ext_clock"; |
| 139 |
pinctrl-names = "default"; |
| 140 |
pinctrl-0 = <&wifi_reg_on_h>; |
| 141 |
reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>; |
| 142 |
}; |
| 143 |
}; |
| 144 |
|
| 145 |
&cpu_b0 { |
| 146 |
cpu-supply = <&vdd_cpu_b>; |
| 147 |
}; |
| 148 |
|
| 149 |
&cpu_b1 { |
| 150 |
cpu-supply = <&vdd_cpu_b>; |
| 151 |
}; |
| 152 |
|
| 153 |
&cpu_l0 { |
| 154 |
cpu-supply = <&vdd_cpu_l>; |
| 155 |
}; |
| 156 |
|
| 157 |
&cpu_l1 { |
| 158 |
cpu-supply = <&vdd_cpu_l>; |
| 159 |
}; |
| 160 |
|
| 161 |
&cpu_l2 { |
| 162 |
cpu-supply = <&vdd_cpu_l>; |
| 163 |
}; |
| 164 |
|
| 165 |
&cpu_l3 { |
| 166 |
cpu-supply = <&vdd_cpu_l>; |
| 167 |
}; |
| 168 |
|
| 169 |
&emmc_phy { |
| 170 |
rockchip,enable-strobe-pulldown; |
| 171 |
status = "okay"; |
| 172 |
}; |
| 173 |
|
| 174 |
&gmac { |
| 175 |
assigned-clock-parents = <&clkin_gmac>; |
| 176 |
assigned-clocks = <&cru SCLK_RMII_SRC>; |
| 177 |
clock_in_out = "input"; |
| 178 |
pinctrl-names = "default"; |
| 179 |
pinctrl-0 = <&rgmii_pins>, <&phy_intb>, <&phy_rstb>; |
| 180 |
phy-handle = <&rtl8211e>; |
| 181 |
phy-mode = "rgmii"; |
| 182 |
phy-supply = <&vcc3v3_s3>; |
| 183 |
tx_delay = <0x28>; |
| 184 |
rx_delay = <0x11>; |
| 185 |
status = "okay"; |
| 186 |
|
| 187 |
mdio { |
| 188 |
compatible = "snps,dwmac-mdio"; |
| 189 |
#address-cells = <1>; |
| 190 |
#size-cells = <0>; |
| 191 |
|
| 192 |
rtl8211e: ethernet-phy@1 { |
| 193 |
reg = <1>; |
| 194 |
interrupt-parent = <&gpio3>; |
| 195 |
interrupts = <RK_PB2 IRQ_TYPE_LEVEL_LOW>; |
| 196 |
reset-assert-us = <10000>; |
| 197 |
reset-deassert-us = <30000>; |
| 198 |
reset-gpios = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>; |
| 199 |
}; |
| 200 |
}; |
| 201 |
}; |
| 202 |
|
| 203 |
&gpu { |
| 204 |
mali-supply = <&vdd_gpu>; |
| 205 |
status = "okay"; |
| 206 |
}; |
| 207 |
|
| 208 |
&hdmi { |
| 209 |
ddc-i2c-bus = <&i2c7>; |
| 210 |
pinctrl-names = "default"; |
| 211 |
pinctrl-0 = <&hdmi_cec>; |
| 212 |
status = "okay"; |
| 213 |
}; |
| 214 |
|
| 215 |
&hdmi_sound { |
| 216 |
status = "okay"; |
| 217 |
}; |
| 218 |
|
| 219 |
&i2c0 { |
| 220 |
clock-frequency = <400000>; |
| 221 |
i2c-scl-rising-time-ns = <160>; |
| 222 |
i2c-scl-falling-time-ns = <30>; |
| 223 |
status = "okay"; |
| 224 |
|
| 225 |
vdd_cpu_b: regulator@40 { |
| 226 |
compatible = "silergy,syr827"; |
| 227 |
reg = <0x40>; |
| 228 |
fcs,suspend-voltage-selector = <1>; |
| 229 |
pinctrl-names = "default"; |
| 230 |
pinctrl-0 = <&cpu_b_sleep>; |
| 231 |
regulator-always-on; |
| 232 |
regulator-boot-on; |
| 233 |
regulator-min-microvolt = <712500>; |
| 234 |
regulator-max-microvolt = <1500000>; |
| 235 |
regulator-name = "vdd_cpu_b"; |
| 236 |
regulator-ramp-delay = <1000>; |
| 237 |
vin-supply = <&vcc3v3_sys>; |
| 238 |
|
| 239 |
regulator-state-mem { |
| 240 |
regulator-off-in-suspend; |
| 241 |
}; |
| 242 |
}; |
| 243 |
|
| 244 |
vdd_gpu: regulator@41 { |
| 245 |
compatible = "silergy,syr828"; |
| 246 |
reg = <0x41>; |
| 247 |
fcs,suspend-voltage-selector = <1>; |
| 248 |
pinctrl-names = "default"; |
| 249 |
pinctrl-0 = <&gpu_sleep>; |
| 250 |
regulator-always-on; |
| 251 |
regulator-boot-on; |
| 252 |
regulator-min-microvolt = <712500>; |
| 253 |
regulator-max-microvolt = <1500000>; |
| 254 |
regulator-name = "vdd_gpu"; |
| 255 |
regulator-ramp-delay = <1000>; |
| 256 |
vin-supply = <&vcc3v3_sys>; |
| 257 |
|
| 258 |
regulator-state-mem { |
| 259 |
regulator-off-in-suspend; |
| 260 |
}; |
| 261 |
}; |
| 262 |
|
| 263 |
rk808: pmic@1b { |
| 264 |
compatible = "rockchip,rk808"; |
| 265 |
reg = <0x1b>; |
| 266 |
clock-output-names = "xin32k", "rtc_clko_wifi"; |
| 267 |
#clock-cells = <1>; |
| 268 |
interrupt-parent = <&gpio1>; |
| 269 |
interrupts = <21 IRQ_TYPE_LEVEL_LOW>; |
| 270 |
pinctrl-names = "default"; |
| 271 |
pinctrl-0 = <&pmic_int_l>, <&ap_pwroff>, <&clk_32k>; |
| 272 |
system-power-controller; |
| 273 |
wakeup-source; |
| 274 |
|
| 275 |
vcc1-supply = <&vcc3v3_sys>; |
| 276 |
vcc2-supply = <&vcc3v3_sys>; |
| 277 |
vcc3-supply = <&vcc3v3_sys>; |
| 278 |
vcc4-supply = <&vcc3v3_sys>; |
| 279 |
vcc6-supply = <&vcc3v3_sys>; |
| 280 |
vcc7-supply = <&vcc3v3_sys>; |
| 281 |
vcc8-supply = <&vcc3v3_sys>; |
| 282 |
vcc9-supply = <&vcc3v3_sys>; |
| 283 |
vcc10-supply = <&vcc3v3_sys>; |
| 284 |
vcc11-supply = <&vcc3v3_sys>; |
| 285 |
vcc12-supply = <&vcc3v3_sys>; |
| 286 |
vddio-supply = <&vcc_3v0>; |
| 287 |
|
| 288 |
regulators { |
| 289 |
vdd_center: DCDC_REG1 { |
| 290 |
regulator-always-on; |
| 291 |
regulator-boot-on; |
| 292 |
regulator-min-microvolt = <750000>; |
| 293 |
regulator-max-microvolt = <1350000>; |
| 294 |
regulator-name = "vdd_center"; |
| 295 |
regulator-ramp-delay = <6001>; |
| 296 |
|
| 297 |
regulator-state-mem { |
| 298 |
regulator-off-in-suspend; |
| 299 |
}; |
| 300 |
}; |
| 301 |
|
| 302 |
vdd_cpu_l: DCDC_REG2 { |
| 303 |
regulator-always-on; |
| 304 |
regulator-boot-on; |
| 305 |
regulator-min-microvolt = <750000>; |
| 306 |
regulator-max-microvolt = <1350000>; |
| 307 |
regulator-name = "vdd_cpu_l"; |
| 308 |
regulator-ramp-delay = <6001>; |
| 309 |
|
| 310 |
regulator-state-mem { |
| 311 |
regulator-off-in-suspend; |
| 312 |
}; |
| 313 |
}; |
| 314 |
|
| 315 |
vcc_ddr: DCDC_REG3 { |
| 316 |
regulator-always-on; |
| 317 |
regulator-boot-on; |
| 318 |
regulator-name = "vcc_ddr"; |
| 319 |
|
| 320 |
regulator-state-mem { |
| 321 |
regulator-on-in-suspend; |
| 322 |
}; |
| 323 |
}; |
| 324 |
|
| 325 |
vcc_1v8: DCDC_REG4 { |
| 326 |
regulator-always-on; |
| 327 |
regulator-boot-on; |
| 328 |
regulator-min-microvolt = <1800000>; |
| 329 |
regulator-max-microvolt = <1800000>; |
| 330 |
regulator-name = "vcc_1v8"; |
| 331 |
|
| 332 |
regulator-state-mem { |
| 333 |
regulator-on-in-suspend; |
| 334 |
regulator-suspend-microvolt = <1800000>; |
| 335 |
}; |
| 336 |
}; |
| 337 |
|
| 338 |
vcc1v8_cam: LDO_REG1 { |
| 339 |
regulator-always-on; |
| 340 |
regulator-boot-on; |
| 341 |
regulator-min-microvolt = <1800000>; |
| 342 |
regulator-max-microvolt = <1800000>; |
| 343 |
regulator-name = "vcc1v8_cam"; |
| 344 |
|
| 345 |
regulator-state-mem { |
| 346 |
regulator-off-in-suspend; |
| 347 |
}; |
| 348 |
}; |
| 349 |
|
| 350 |
vcc3v0_touch: LDO_REG2 { |
| 351 |
regulator-always-on; |
| 352 |
regulator-boot-on; |
| 353 |
regulator-min-microvolt = <3000000>; |
| 354 |
regulator-max-microvolt = <3000000>; |
| 355 |
regulator-name = "vcc3v0_touch"; |
| 356 |
|
| 357 |
regulator-state-mem { |
| 358 |
regulator-off-in-suspend; |
| 359 |
}; |
| 360 |
}; |
| 361 |
|
| 362 |
vcc1v8_pmupll: LDO_REG3 { |
| 363 |
regulator-always-on; |
| 364 |
regulator-boot-on; |
| 365 |
regulator-min-microvolt = <1800000>; |
| 366 |
regulator-max-microvolt = <1800000>; |
| 367 |
regulator-name = "vcc1v8_pmupll"; |
| 368 |
|
| 369 |
regulator-state-mem { |
| 370 |
regulator-on-in-suspend; |
| 371 |
regulator-suspend-microvolt = <1800000>; |
| 372 |
}; |
| 373 |
}; |
| 374 |
|
| 375 |
vcc_sdio: LDO_REG4 { |
| 376 |
regulator-always-on; |
| 377 |
regulator-boot-on; |
| 378 |
regulator-min-microvolt = <1800000>; |
| 379 |
regulator-max-microvolt = <3300000>; |
| 380 |
regulator-name = "vcc_sdio"; |
| 381 |
|
| 382 |
regulator-state-mem { |
| 383 |
regulator-on-in-suspend; |
| 384 |
regulator-suspend-microvolt = <3000000>; |
| 385 |
}; |
| 386 |
}; |
| 387 |
|
| 388 |
vcca3v0_codec: LDO_REG5 { |
| 389 |
regulator-always-on; |
| 390 |
regulator-boot-on; |
| 391 |
regulator-min-microvolt = <3000000>; |
| 392 |
regulator-max-microvolt = <3000000>; |
| 393 |
regulator-name = "vcca3v0_codec"; |
| 394 |
|
| 395 |
regulator-state-mem { |
| 396 |
regulator-off-in-suspend; |
| 397 |
}; |
| 398 |
}; |
| 399 |
|
| 400 |
vcc_1v5: LDO_REG6 { |
| 401 |
regulator-always-on; |
| 402 |
regulator-boot-on; |
| 403 |
regulator-min-microvolt = <1500000>; |
| 404 |
regulator-max-microvolt = <1500000>; |
| 405 |
regulator-name = "vcc_1v5"; |
| 406 |
|
| 407 |
regulator-state-mem { |
| 408 |
regulator-on-in-suspend; |
| 409 |
regulator-suspend-microvolt = <1500000>; |
| 410 |
}; |
| 411 |
}; |
| 412 |
|
| 413 |
vcca1v8_codec: LDO_REG7 { |
| 414 |
regulator-always-on; |
| 415 |
regulator-boot-on; |
| 416 |
regulator-min-microvolt = <1800000>; |
| 417 |
regulator-max-microvolt = <1800000>; |
| 418 |
regulator-name = "vcca1v8_codec"; |
| 419 |
|
| 420 |
regulator-state-mem { |
| 421 |
regulator-off-in-suspend; |
| 422 |
}; |
| 423 |
}; |
| 424 |
|
| 425 |
vcc_3v0: LDO_REG8 { |
| 426 |
regulator-always-on; |
| 427 |
regulator-boot-on; |
| 428 |
regulator-min-microvolt = <3000000>; |
| 429 |
regulator-max-microvolt = <3000000>; |
| 430 |
regulator-name = "vcc_3v0"; |
| 431 |
|
| 432 |
regulator-state-mem { |
| 433 |
regulator-on-in-suspend; |
| 434 |
regulator-suspend-microvolt = <3000000>; |
| 435 |
}; |
| 436 |
}; |
| 437 |
|
| 438 |
vcc3v3_s3: SWITCH_REG1 { |
| 439 |
regulator-always-on; |
| 440 |
regulator-boot-on; |
| 441 |
regulator-name = "vcc3v3_s3"; |
| 442 |
|
| 443 |
regulator-state-mem { |
| 444 |
regulator-off-in-suspend; |
| 445 |
}; |
| 446 |
}; |
| 447 |
|
| 448 |
vcc3v3_s0: SWITCH_REG2 { |
| 449 |
regulator-always-on; |
| 450 |
regulator-boot-on; |
| 451 |
regulator-name = "vcc3v3_s0"; |
| 452 |
|
| 453 |
regulator-state-mem { |
| 454 |
regulator-off-in-suspend; |
| 455 |
}; |
| 456 |
}; |
| 457 |
}; |
| 458 |
}; |
| 459 |
}; |
| 460 |
|
| 461 |
&i2c1 { |
| 462 |
clock-frequency = <200000>; |
| 463 |
i2c-scl-rising-time-ns = <150>; |
| 464 |
i2c-scl-falling-time-ns = <30>; |
| 465 |
status = "okay"; |
| 466 |
}; |
| 467 |
|
| 468 |
&i2c2 { |
| 469 |
status = "okay"; |
| 470 |
}; |
| 471 |
|
| 472 |
&i2c4 { |
| 473 |
clock-frequency = <400000>; |
| 474 |
i2c-scl-rising-time-ns = <160>; |
| 475 |
i2c-scl-falling-time-ns = <30>; |
| 476 |
status = "okay"; |
| 477 |
|
| 478 |
fusb0: typec-portc@22 { |
| 479 |
compatible = "fcs,fusb302"; |
| 480 |
reg = <0x22>; |
| 481 |
interrupt-parent = <&gpio1>; |
| 482 |
interrupts = <RK_PA2 IRQ_TYPE_LEVEL_LOW>; |
| 483 |
pinctrl-names = "default"; |
| 484 |
pinctrl-0 = <&fusb0_int>; |
| 485 |
vbus-supply = <&vbus_typec>; |
| 486 |
}; |
| 487 |
}; |
| 488 |
|
| 489 |
&i2c7 { |
| 490 |
status = "okay"; |
| 491 |
}; |
| 492 |
|
| 493 |
&i2s2 { |
| 494 |
status = "okay"; |
| 495 |
}; |
| 496 |
|
| 497 |
&io_domains { |
| 498 |
bt656-supply = <&vcc_1v8>; |
| 499 |
audio-supply = <&vcca1v8_codec>; |
| 500 |
sdmmc-supply = <&vcc_sdio>; |
| 501 |
gpio1830-supply = <&vcc_3v0>; |
| 502 |
status = "okay"; |
| 503 |
}; |
| 504 |
|
| 505 |
&pcie_phy { |
| 506 |
assigned-clock-parents = <&cru SCLK_PCIEPHY_REF100M>; |
| 507 |
assigned-clock-rates = <100000000>; |
| 508 |
assigned-clocks = <&cru SCLK_PCIEPHY_REF>; |
| 509 |
status = "okay"; |
| 510 |
}; |
| 511 |
|
| 512 |
&pcie0 { |
| 513 |
num-lanes = <2>; |
| 514 |
vpcie0v9-supply = <&vcca0v9_s3>; |
| 515 |
vpcie1v8-supply = <&vcca1v8_s3>; |
| 516 |
status = "okay"; |
| 517 |
}; |
| 518 |
|
| 519 |
&pinctrl { |
| 520 |
fusb30x { |
| 521 |
fusb0_int: fusb0-int { |
| 522 |
rockchip,pins = <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>; |
| 523 |
}; |
| 524 |
}; |
| 525 |
|
| 526 |
gpio-leds { |
| 527 |
status_led_pin: status-led-pin { |
| 528 |
rockchip,pins = <0 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>; |
| 529 |
}; |
| 530 |
}; |
| 531 |
|
| 532 |
gmac { |
| 533 |
phy_intb: phy-intb { |
| 534 |
rockchip,pins = <3 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>; |
| 535 |
}; |
| 536 |
|
| 537 |
phy_rstb: phy-rstb { |
| 538 |
rockchip,pins = <3 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>; |
| 539 |
}; |
| 540 |
}; |
| 541 |
|
| 542 |
pmic { |
| 543 |
cpu_b_sleep: cpu-b-sleep { |
| 544 |
rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_down>; |
| 545 |
}; |
| 546 |
|
| 547 |
gpu_sleep: gpu-sleep { |
| 548 |
rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>; |
| 549 |
}; |
| 550 |
|
| 551 |
pmic_int_l: pmic-int-l { |
| 552 |
rockchip,pins = <1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>; |
| 553 |
}; |
| 554 |
}; |
| 555 |
|
| 556 |
rockchip-key { |
| 557 |
power_key: power-key { |
| 558 |
rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>; |
| 559 |
}; |
| 560 |
}; |
| 561 |
|
| 562 |
sdio { |
| 563 |
bt_host_wake_l: bt-host-wake-l { |
| 564 |
rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>; |
| 565 |
}; |
| 566 |
|
| 567 |
bt_reg_on_h: bt-reg-on-h { |
| 568 |
/* external pullup to VCC1V8_PMUPLL */ |
| 569 |
rockchip,pins = <0 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>; |
| 570 |
}; |
| 571 |
|
| 572 |
bt_wake_l: bt-wake-l { |
| 573 |
rockchip,pins = <2 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>; |
| 574 |
}; |
| 575 |
|
| 576 |
wifi_reg_on_h: wifi-reg_on-h { |
| 577 |
rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>; |
| 578 |
}; |
| 579 |
}; |
| 580 |
|
| 581 |
sdmmc { |
| 582 |
sdmmc0_det_l: sdmmc0-det-l { |
| 583 |
rockchip,pins = <0 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up>; |
| 584 |
}; |
| 585 |
|
| 586 |
sdmmc0_pwr_h: sdmmc0-pwr-h { |
| 587 |
rockchip,pins = <0 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>; |
| 588 |
}; |
| 589 |
}; |
| 590 |
}; |
| 591 |
|
| 592 |
&pmu_io_domains { |
| 593 |
pmu1830-supply = <&vcc_3v0>; |
| 594 |
status = "okay"; |
| 595 |
}; |
| 596 |
|
| 597 |
&pwm0 { |
| 598 |
status = "okay"; |
| 599 |
}; |
| 600 |
|
| 601 |
&pwm1 { |
| 602 |
status = "okay"; |
| 603 |
}; |
| 604 |
|
| 605 |
&pwm2 { |
| 606 |
pinctrl-names = "default"; |
| 607 |
pinctrl-0 = <&pwm2_pin_pull_down>; |
| 608 |
status = "okay"; |
| 609 |
}; |
| 610 |
|
| 611 |
&saradc { |
| 612 |
vref-supply = <&vcca1v8_s3>; |
| 613 |
status = "okay"; |
| 614 |
}; |
| 615 |
|
| 616 |
&sdhci { |
| 617 |
bus-width = <8>; |
| 618 |
mmc-hs200-1_8v; |
| 619 |
non-removable; |
| 620 |
status = "okay"; |
| 621 |
}; |
| 622 |
|
| 623 |
&sdio0 { |
| 624 |
bus-width = <4>; |
| 625 |
cap-sd-highspeed; |
| 626 |
cap-sdio-irq; |
| 627 |
keep-power-in-suspend; |
| 628 |
mmc-pwrseq = <&sdio_pwrseq>; |
| 629 |
non-removable; |
| 630 |
pinctrl-names = "default"; |
| 631 |
pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk>; |
| 632 |
sd-uhs-sdr104; |
| 633 |
status = "okay"; |
| 634 |
}; |
| 635 |
|
| 636 |
&sdmmc { |
| 637 |
bus-width = <4>; |
| 638 |
cap-sd-highspeed; |
| 639 |
cap-mmc-highspeed; |
| 640 |
cd-gpios = <&gpio0 RK_PA7 GPIO_ACTIVE_LOW>; |
| 641 |
disable-wp; |
| 642 |
pinctrl-names = "default"; |
| 643 |
pinctrl-0 = <&sdmmc_bus4 &sdmmc_clk &sdmmc_cmd &sdmmc0_det_l>; |
| 644 |
sd-uhs-sdr104; |
| 645 |
vmmc-supply = <&vcc3v0_sd>; |
| 646 |
vqmmc-supply = <&vcc_sdio>; |
| 647 |
status = "okay"; |
| 648 |
}; |
| 649 |
|
| 650 |
&tcphy0 { |
| 651 |
status = "okay"; |
| 652 |
}; |
| 653 |
|
| 654 |
&tcphy1 { |
| 655 |
status = "okay"; |
| 656 |
}; |
| 657 |
|
| 658 |
&tsadc { |
| 659 |
/* tshut mode 0:CRU 1:GPIO */ |
| 660 |
rockchip,hw-tshut-mode = <1>; |
| 661 |
/* tshut polarity 0:LOW 1:HIGH */ |
| 662 |
rockchip,hw-tshut-polarity = <1>; |
| 663 |
status = "okay"; |
| 664 |
}; |
| 665 |
|
| 666 |
&u2phy0 { |
| 667 |
status = "okay"; |
| 668 |
}; |
| 669 |
|
| 670 |
&u2phy0_host { |
| 671 |
status = "okay"; |
| 672 |
}; |
| 673 |
|
| 674 |
&u2phy0_otg { |
| 675 |
status = "okay"; |
| 676 |
}; |
| 677 |
|
| 678 |
&u2phy1 { |
| 679 |
status = "okay"; |
| 680 |
}; |
| 681 |
|
| 682 |
&u2phy1_host { |
| 683 |
status = "okay"; |
| 684 |
}; |
| 685 |
|
| 686 |
&u2phy1_otg { |
| 687 |
status = "okay"; |
| 688 |
}; |
| 689 |
|
| 690 |
&uart0 { |
| 691 |
pinctrl-names = "default"; |
| 692 |
pinctrl-0 = <&uart0_xfer &uart0_rts &uart0_cts>; |
| 693 |
status = "okay"; |
| 694 |
|
| 695 |
bluetooth { |
| 696 |
compatible = "brcm,bcm43438-bt"; |
| 697 |
clocks = <&rk808 1>; |
| 698 |
clock-names = "lpo"; |
| 699 |
device-wakeup-gpios = <&gpio2 RK_PD2 GPIO_ACTIVE_HIGH>; |
| 700 |
host-wakeup-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_HIGH>; |
| 701 |
shutdown-gpios = <&gpio0 RK_PB1 GPIO_ACTIVE_HIGH>; |
| 702 |
max-speed = <4000000>; |
| 703 |
pinctrl-names = "default"; |
| 704 |
pinctrl-0 = <&bt_reg_on_h &bt_host_wake_l &bt_wake_l>; |
| 705 |
vbat-supply = <&vcc3v3_sys>; |
| 706 |
vddio-supply = <&vcc_1v8>; |
| 707 |
}; |
| 708 |
}; |
| 709 |
|
| 710 |
&uart2 { |
| 711 |
status = "okay"; |
| 712 |
}; |
| 713 |
|
| 714 |
&usbdrd3_0 { |
| 715 |
status = "okay"; |
| 716 |
}; |
| 717 |
|
| 718 |
&usbdrd3_1 { |
| 719 |
status = "okay"; |
| 720 |
}; |
| 721 |
|
| 722 |
&usbdrd_dwc3_0 { |
| 723 |
status = "okay"; |
| 724 |
}; |
| 725 |
|
| 726 |
&usbdrd_dwc3_1 { |
| 727 |
dr_mode = "host"; |
| 728 |
status = "okay"; |
| 729 |
}; |
| 730 |
|
| 731 |
&usb_host0_ehci { |
| 732 |
status = "okay"; |
| 733 |
}; |
| 734 |
|
| 735 |
&usb_host0_ohci { |
| 736 |
status = "okay"; |
| 737 |
}; |
| 738 |
|
| 739 |
&usb_host1_ehci { |
| 740 |
status = "okay"; |
| 741 |
}; |
| 742 |
|
| 743 |
&usb_host1_ohci { |
| 744 |
status = "okay"; |
| 745 |
}; |
| 746 |
|
| 747 |
&vopb { |
| 748 |
status = "okay"; |
| 749 |
}; |
| 750 |
|
| 751 |
&vopb_mmu { |
| 752 |
status = "okay"; |
| 753 |
}; |
| 754 |
|
| 755 |
&vopl { |
| 756 |
status = "okay"; |
| 757 |
}; |
| 758 |
|
| 759 |
&vopl_mmu { |
| 760 |
status = "okay"; |
| 761 |
}; |