| 1 |
// SPDX-License-Identifier: (GPL-2.0+ OR MIT) |
| 2 |
/* |
| 3 |
* FriendlyElec NanoPC-T4 board device tree source |
| 4 |
* |
| 5 |
* Copyright (c) 2018 FriendlyElec Computer Tech. Co., Ltd. |
| 6 |
* (http://www.friendlyarm.com) |
| 7 |
* |
| 8 |
* Copyright (c) 2018 Collabora Ltd. |
| 9 |
*/ |
| 10 |
|
| 11 |
/dts-v1/; |
| 12 |
#include "rk3399-nanopi4.dtsi" |
| 13 |
|
| 14 |
/ { |
| 15 |
model = "FriendlyElec NanoPC-T4"; |
| 16 |
compatible = "friendlyarm,nanopc-t4", "rockchip,rk3399"; |
| 17 |
|
| 18 |
vcc12v0_sys: regulator-vcc12v0-sys { |
| 19 |
compatible = "regulator-fixed"; |
| 20 |
regulator-always-on; |
| 21 |
regulator-boot-on; |
| 22 |
regulator-max-microvolt = <12000000>; |
| 23 |
regulator-min-microvolt = <12000000>; |
| 24 |
regulator-name = "vcc12v0_sys"; |
| 25 |
}; |
| 26 |
|
| 27 |
vcc5v0_host0: regulator-vcc5v0-host0 { |
| 28 |
compatible = "regulator-fixed"; |
| 29 |
regulator-always-on; |
| 30 |
regulator-boot-on; |
| 31 |
regulator-name = "vcc5v0_host0"; |
| 32 |
vin-supply = <&vcc5v0_sys>; |
| 33 |
}; |
| 34 |
|
| 35 |
adc-keys { |
| 36 |
compatible = "adc-keys"; |
| 37 |
io-channels = <&saradc 1>; |
| 38 |
io-channel-names = "buttons"; |
| 39 |
keyup-threshold-microvolt = <1800000>; |
| 40 |
poll-interval = <100>; |
| 41 |
|
| 42 |
button-recovery { |
| 43 |
label = "Recovery"; |
| 44 |
linux,code = <KEY_VENDOR>; |
| 45 |
press-threshold-microvolt = <18000>; |
| 46 |
}; |
| 47 |
}; |
| 48 |
|
| 49 |
ir-receiver { |
| 50 |
compatible = "gpio-ir-receiver"; |
| 51 |
gpios = <&gpio0 RK_PA6 GPIO_ACTIVE_LOW>; |
| 52 |
pinctrl-names = "default"; |
| 53 |
pinctrl-0 = <&ir_rx>; |
| 54 |
}; |
| 55 |
|
| 56 |
fan: pwm-fan { |
| 57 |
compatible = "pwm-fan"; |
| 58 |
/* |
| 59 |
* With 20KHz PWM and an EVERCOOL EC4007H12SA fan, these levels |
| 60 |
* work out to 0, ~1200, ~3000, and 5000RPM respectively. |
| 61 |
*/ |
| 62 |
cooling-levels = <0 12 18 255>; |
| 63 |
#cooling-cells = <2>; |
| 64 |
fan-supply = <&vcc12v0_sys>; |
| 65 |
pwms = <&pwm1 0 50000 0>; |
| 66 |
}; |
| 67 |
}; |
| 68 |
|
| 69 |
&cpu_thermal { |
| 70 |
trips { |
| 71 |
cpu_warm: cpu_warm { |
| 72 |
temperature = <55000>; |
| 73 |
hysteresis = <2000>; |
| 74 |
type = "active"; |
| 75 |
}; |
| 76 |
|
| 77 |
cpu_hot: cpu_hot { |
| 78 |
temperature = <65000>; |
| 79 |
hysteresis = <2000>; |
| 80 |
type = "active"; |
| 81 |
}; |
| 82 |
}; |
| 83 |
|
| 84 |
cooling-maps { |
| 85 |
map2 { |
| 86 |
trip = <&cpu_warm>; |
| 87 |
cooling-device = <&fan THERMAL_NO_LIMIT 1>; |
| 88 |
}; |
| 89 |
|
| 90 |
map3 { |
| 91 |
trip = <&cpu_hot>; |
| 92 |
cooling-device = <&fan 2 THERMAL_NO_LIMIT>; |
| 93 |
}; |
| 94 |
}; |
| 95 |
}; |
| 96 |
|
| 97 |
&pcie0 { |
| 98 |
ep-gpios = <&gpio2 RK_PA4 GPIO_ACTIVE_HIGH>; |
| 99 |
num-lanes = <4>; |
| 100 |
vpcie3v3-supply = <&vcc3v3_sys>; |
| 101 |
}; |
| 102 |
|
| 103 |
&pinctrl { |
| 104 |
ir { |
| 105 |
ir_rx: ir-rx { |
| 106 |
/* external pullup to VCC3V3_SYS, despite being 1.8V :/ */ |
| 107 |
rockchip,pins = <0 RK_PA6 1 &pcfg_pull_none>; |
| 108 |
}; |
| 109 |
}; |
| 110 |
}; |
| 111 |
|
| 112 |
&sdhci { |
| 113 |
mmc-hs400-1_8v; |
| 114 |
mmc-hs400-enhanced-strobe; |
| 115 |
}; |
| 116 |
|
| 117 |
&u2phy0_host { |
| 118 |
phy-supply = <&vcc5v0_host0>; |
| 119 |
}; |
| 120 |
|
| 121 |
&u2phy1_host { |
| 122 |
phy-supply = <&vcc5v0_host0>; |
| 123 |
}; |
| 124 |
|
| 125 |
&vcc5v0_sys { |
| 126 |
vin-supply = <&vcc12v0_sys>; |
| 127 |
}; |
| 128 |
|
| 129 |
&vcc3v3_sys { |
| 130 |
vin-supply = <&vcc12v0_sys>; |
| 131 |
}; |
| 132 |
|
| 133 |
&vbus_typec { |
| 134 |
enable-active-high; |
| 135 |
gpios = <&gpio4 RK_PD2 GPIO_ACTIVE_HIGH>; |
| 136 |
vin-supply = <&vcc5v0_sys>; |
| 137 |
}; |