| 1 |
// SPDX-License-Identifier: (GPL-2.0+ OR MIT) |
| 2 |
/* |
| 3 |
* Google Gru-scarlet board device tree source |
| 4 |
* |
| 5 |
* Copyright 2018 Google, Inc |
| 6 |
*/ |
| 7 |
|
| 8 |
#include "rk3399-gru.dtsi" |
| 9 |
|
| 10 |
/{ |
| 11 |
chassis-type = "tablet"; |
| 12 |
|
| 13 |
/* Power tree */ |
| 14 |
|
| 15 |
/* ppvar_sys children, sorted by name */ |
| 16 |
pp1250_s3: regulator-pp1250-s3 { |
| 17 |
compatible = "regulator-fixed"; |
| 18 |
regulator-name = "pp1250_s3"; |
| 19 |
|
| 20 |
/* EC turns on w/ pp1250_s3_en; always on for AP */ |
| 21 |
regulator-always-on; |
| 22 |
regulator-boot-on; |
| 23 |
regulator-min-microvolt = <1250000>; |
| 24 |
regulator-max-microvolt = <1250000>; |
| 25 |
|
| 26 |
vin-supply = <&ppvar_sys>; |
| 27 |
}; |
| 28 |
|
| 29 |
pp1250_cam: regulator-pp1250-dvdd { |
| 30 |
compatible = "regulator-fixed"; |
| 31 |
regulator-name = "pp1250_dvdd"; |
| 32 |
pinctrl-names = "default"; |
| 33 |
pinctrl-0 = <&pp1250_cam_en>; |
| 34 |
|
| 35 |
enable-active-high; |
| 36 |
gpio = <&gpio2 4 GPIO_ACTIVE_HIGH>; |
| 37 |
|
| 38 |
/* 740us delay from gpio output high to pp1250 stable, |
| 39 |
* rounding up to 1ms for safety. |
| 40 |
*/ |
| 41 |
startup-delay-us = <1000>; |
| 42 |
vin-supply = <&pp1250_s3>; |
| 43 |
}; |
| 44 |
|
| 45 |
pp900_s0: regulator-pp900-s0 { |
| 46 |
compatible = "regulator-fixed"; |
| 47 |
regulator-name = "pp900_s0"; |
| 48 |
|
| 49 |
/* EC turns on w/ pp900_s0_en; always on for AP */ |
| 50 |
regulator-always-on; |
| 51 |
regulator-boot-on; |
| 52 |
regulator-min-microvolt = <900000>; |
| 53 |
regulator-max-microvolt = <900000>; |
| 54 |
|
| 55 |
vin-supply = <&ppvar_sys>; |
| 56 |
}; |
| 57 |
|
| 58 |
ppvarn_lcd: regulator-ppvarn-lcd { |
| 59 |
compatible = "regulator-fixed"; |
| 60 |
regulator-name = "ppvarn_lcd"; |
| 61 |
pinctrl-names = "default"; |
| 62 |
pinctrl-0 = <&ppvarn_lcd_en>; |
| 63 |
|
| 64 |
enable-active-high; |
| 65 |
gpio = <&gpio4 28 GPIO_ACTIVE_HIGH>; |
| 66 |
vin-supply = <&ppvar_sys>; |
| 67 |
}; |
| 68 |
|
| 69 |
ppvarp_lcd: regulator-ppvarp-lcd { |
| 70 |
compatible = "regulator-fixed"; |
| 71 |
regulator-name = "ppvarp_lcd"; |
| 72 |
pinctrl-names = "default"; |
| 73 |
pinctrl-0 = <&ppvarp_lcd_en>; |
| 74 |
|
| 75 |
enable-active-high; |
| 76 |
gpio = <&gpio4 27 GPIO_ACTIVE_HIGH>; |
| 77 |
vin-supply = <&ppvar_sys>; |
| 78 |
}; |
| 79 |
|
| 80 |
/* pp1800 children, sorted by name */ |
| 81 |
pp900_s3: regulator-pp900-s3 { |
| 82 |
compatible = "regulator-fixed"; |
| 83 |
regulator-name = "pp900_s3"; |
| 84 |
|
| 85 |
/* EC turns on w/ pp900_s3_en; always on for AP */ |
| 86 |
regulator-always-on; |
| 87 |
regulator-boot-on; |
| 88 |
regulator-min-microvolt = <900000>; |
| 89 |
regulator-max-microvolt = <900000>; |
| 90 |
|
| 91 |
vin-supply = <&pp1800>; |
| 92 |
}; |
| 93 |
|
| 94 |
/* EC turns on pp1800_s3_en */ |
| 95 |
pp1800_s3: regulator-pp1800 { |
| 96 |
}; |
| 97 |
|
| 98 |
/* pp3300 children, sorted by name */ |
| 99 |
pp2800_cam: regulator-pp2800-avdd { |
| 100 |
compatible = "regulator-fixed"; |
| 101 |
regulator-name = "pp2800_avdd"; |
| 102 |
pinctrl-names = "default"; |
| 103 |
pinctrl-0 = <&pp2800_cam_en>; |
| 104 |
|
| 105 |
enable-active-high; |
| 106 |
gpio = <&gpio2 24 GPIO_ACTIVE_HIGH>; |
| 107 |
startup-delay-us = <100>; |
| 108 |
vin-supply = <&pp3300>; |
| 109 |
}; |
| 110 |
|
| 111 |
/* EC turns on pp3300_s0_en */ |
| 112 |
pp3300_s0: regulator-pp3300 { |
| 113 |
}; |
| 114 |
|
| 115 |
/* EC turns on pp3300_s3_en */ |
| 116 |
pp3300_s3: regulator-pp3300 { |
| 117 |
}; |
| 118 |
|
| 119 |
/* |
| 120 |
* See b/66922012 |
| 121 |
* |
| 122 |
* This is a hack to make sure the Bluetooth part of the QCA6174A |
| 123 |
* is reset at boot by toggling BT_EN. At boot BT_EN is first set |
| 124 |
* to low when the bt_3v3 regulator is registered (in disabled |
| 125 |
* state). The fake regulator is configured as a supply of the |
| 126 |
* wlan_3v3 regulator below. When wlan_3v3 is enabled early in |
| 127 |
* the boot process it also enables its supply regulator bt_3v3, |
| 128 |
* which changes BT_EN to high. |
| 129 |
*/ |
| 130 |
bt_3v3: regulator-bt-3v3 { |
| 131 |
compatible = "regulator-fixed"; |
| 132 |
regulator-name = "bt_3v3"; |
| 133 |
pinctrl-names = "default"; |
| 134 |
pinctrl-0 = <&bt_en_1v8_l>; |
| 135 |
|
| 136 |
enable-active-high; |
| 137 |
gpio = <&gpio0 8 GPIO_ACTIVE_HIGH>; |
| 138 |
vin-supply = <&pp3300_s3>; |
| 139 |
}; |
| 140 |
|
| 141 |
wlan_3v3: regulator-wlan-3v3 { |
| 142 |
compatible = "regulator-fixed"; |
| 143 |
regulator-name = "wlan_3v3"; |
| 144 |
pinctrl-names = "default"; |
| 145 |
pinctrl-0 = <&wlan_pd_1v8_l>; |
| 146 |
|
| 147 |
/* |
| 148 |
* The WL_EN pin is driven low when the regulator is |
| 149 |
* registered, and transitions to high when the PCIe bus |
| 150 |
* is powered up. |
| 151 |
*/ |
| 152 |
enable-active-high; |
| 153 |
gpio = <&gpio0 4 GPIO_ACTIVE_HIGH>; |
| 154 |
|
| 155 |
/* |
| 156 |
* Require minimum 10ms from power-on (e.g., PD#) to init PCIe. |
| 157 |
* TODO (b/64444991): how long to assert PD#? |
| 158 |
*/ |
| 159 |
regulator-enable-ramp-delay = <10000>; |
| 160 |
/* See bt_3v3 hack above */ |
| 161 |
vin-supply = <&bt_3v3>; |
| 162 |
}; |
| 163 |
|
| 164 |
backlight: backlight { |
| 165 |
compatible = "pwm-backlight"; |
| 166 |
enable-gpios = <&gpio4 21 GPIO_ACTIVE_HIGH>; |
| 167 |
pinctrl-names = "default"; |
| 168 |
pinctrl-0 = <&bl_en>; |
| 169 |
pwms = <&pwm1 0 1000000 0>; |
| 170 |
}; |
| 171 |
|
| 172 |
dmic: dmic { |
| 173 |
compatible = "dmic-codec"; |
| 174 |
dmicen-gpios = <&gpio4 3 GPIO_ACTIVE_HIGH>; |
| 175 |
pinctrl-names = "default"; |
| 176 |
pinctrl-0 = <&dmic_en>; |
| 177 |
wakeup-delay-ms = <250>; |
| 178 |
}; |
| 179 |
|
| 180 |
gpio_keys: gpio-keys { |
| 181 |
compatible = "gpio-keys"; |
| 182 |
pinctrl-names = "default"; |
| 183 |
pinctrl-0 = <&pen_eject_odl>; |
| 184 |
|
| 185 |
switch-pen-insert { |
| 186 |
label = "Pen Insert"; |
| 187 |
/* Insert = low, eject = high */ |
| 188 |
gpios = <&gpio1 1 GPIO_ACTIVE_LOW>; |
| 189 |
linux,code = <SW_PEN_INSERTED>; |
| 190 |
linux,input-type = <EV_SW>; |
| 191 |
wakeup-source; |
| 192 |
}; |
| 193 |
}; |
| 194 |
}; |
| 195 |
|
| 196 |
/* pp900_s0 aliases */ |
| 197 |
pp900_ddrpll_ap: &pp900_s0 { |
| 198 |
}; |
| 199 |
pp900_pcie: &pp900_s0 { |
| 200 |
}; |
| 201 |
pp900_usb: &pp900_s0 { |
| 202 |
}; |
| 203 |
|
| 204 |
/* pp900_s3 aliases */ |
| 205 |
pp900_emmcpll: &pp900_s3 { |
| 206 |
}; |
| 207 |
|
| 208 |
/* EC turns on; alias for pp1800_s0 */ |
| 209 |
pp1800_pcie: &pp1800_s0 { |
| 210 |
}; |
| 211 |
|
| 212 |
/* On scarlet PPVAR(big_cpu, lit_cpu, gpu) need to adjust voltage ranges */ |
| 213 |
&ppvar_bigcpu { |
| 214 |
ctrl-voltage-range = <800074 1299226>; |
| 215 |
regulator-min-microvolt = <800074>; |
| 216 |
regulator-max-microvolt = <1299226>; |
| 217 |
}; |
| 218 |
|
| 219 |
&ppvar_bigcpu_pwm { |
| 220 |
/* On scarlet ppvar big cpu use pwm3 */ |
| 221 |
pwms = <&pwm3 0 3337 0>; |
| 222 |
regulator-min-microvolt = <800074>; |
| 223 |
regulator-max-microvolt = <1299226>; |
| 224 |
}; |
| 225 |
|
| 226 |
&ppvar_litcpu { |
| 227 |
ctrl-voltage-range = <802122 1199620>; |
| 228 |
regulator-min-microvolt = <802122>; |
| 229 |
regulator-max-microvolt = <1199620>; |
| 230 |
}; |
| 231 |
|
| 232 |
&ppvar_litcpu_pwm { |
| 233 |
regulator-min-microvolt = <802122>; |
| 234 |
regulator-max-microvolt = <1199620>; |
| 235 |
}; |
| 236 |
|
| 237 |
&ppvar_gpu { |
| 238 |
ctrl-voltage-range = <799600 1099600>; |
| 239 |
regulator-min-microvolt = <799600>; |
| 240 |
regulator-max-microvolt = <1099600>; |
| 241 |
}; |
| 242 |
|
| 243 |
&ppvar_gpu_pwm { |
| 244 |
regulator-min-microvolt = <799600>; |
| 245 |
regulator-max-microvolt = <1099600>; |
| 246 |
}; |
| 247 |
|
| 248 |
&ppvar_sd_card_io { |
| 249 |
states = <1800000 0x0>, <3300000 0x1>; |
| 250 |
regulator-max-microvolt = <3300000>; |
| 251 |
}; |
| 252 |
|
| 253 |
&pp3000_sd_slot { |
| 254 |
vin-supply = <&pp3300>; |
| 255 |
}; |
| 256 |
|
| 257 |
ap_i2c_dig: &i2c2 { |
| 258 |
status = "okay"; |
| 259 |
|
| 260 |
clock-frequency = <400000>; |
| 261 |
|
| 262 |
/* These are relatively safe rise/fall times. */ |
| 263 |
i2c-scl-falling-time-ns = <50>; |
| 264 |
i2c-scl-rising-time-ns = <300>; |
| 265 |
|
| 266 |
digitizer: digitizer@9 { |
| 267 |
compatible = "hid-over-i2c"; |
| 268 |
reg = <0x9>; |
| 269 |
interrupt-parent = <&gpio1>; |
| 270 |
interrupts = <0 IRQ_TYPE_LEVEL_LOW>; |
| 271 |
hid-descr-addr = <0x1>; |
| 272 |
pinctrl-names = "default"; |
| 273 |
pinctrl-0 = <&pen_int_odl &pen_reset_l>; |
| 274 |
}; |
| 275 |
}; |
| 276 |
|
| 277 |
&ap_i2c_ts { |
| 278 |
touchscreen: touchscreen@10 { |
| 279 |
compatible = "elan,ekth3500"; |
| 280 |
reg = <0x10>; |
| 281 |
interrupt-parent = <&gpio1>; |
| 282 |
interrupts = <4 IRQ_TYPE_LEVEL_LOW>; |
| 283 |
pinctrl-names = "default"; |
| 284 |
pinctrl-0 = <&touch_int_l &touch_reset_l>; |
| 285 |
reset-gpios = <&gpio0 10 GPIO_ACTIVE_LOW>; |
| 286 |
}; |
| 287 |
}; |
| 288 |
|
| 289 |
camera: &i2c7 { |
| 290 |
status = "okay"; |
| 291 |
|
| 292 |
clock-frequency = <400000>; |
| 293 |
|
| 294 |
/* These are relatively safe rise/fall times; TODO: measure */ |
| 295 |
i2c-scl-falling-time-ns = <50>; |
| 296 |
i2c-scl-rising-time-ns = <300>; |
| 297 |
|
| 298 |
/* 24M mclk is shared between world and user cameras */ |
| 299 |
pinctrl-0 = <&i2c7_xfer &test_clkout1>; |
| 300 |
|
| 301 |
/* Rear-facing camera */ |
| 302 |
wcam: camera@36 { |
| 303 |
compatible = "ovti,ov5695"; |
| 304 |
reg = <0x36>; |
| 305 |
pinctrl-names = "default"; |
| 306 |
pinctrl-0 = <&wcam_rst>; |
| 307 |
|
| 308 |
clocks = <&cru SCLK_TESTCLKOUT1>; |
| 309 |
clock-names = "xvclk"; |
| 310 |
|
| 311 |
avdd-supply = <&pp2800_cam>; |
| 312 |
dvdd-supply = <&pp1250_cam>; |
| 313 |
dovdd-supply = <&pp1800_s0>; |
| 314 |
reset-gpios = <&gpio2 5 GPIO_ACTIVE_LOW>; |
| 315 |
|
| 316 |
port { |
| 317 |
wcam_out: endpoint { |
| 318 |
remote-endpoint = <&mipi_in_wcam>; |
| 319 |
data-lanes = <1 2>; |
| 320 |
}; |
| 321 |
}; |
| 322 |
}; |
| 323 |
|
| 324 |
/* Front-facing camera */ |
| 325 |
ucam: camera@3c { |
| 326 |
compatible = "ovti,ov2685"; |
| 327 |
reg = <0x3c>; |
| 328 |
pinctrl-names = "default"; |
| 329 |
pinctrl-0 = <&ucam_rst>; |
| 330 |
|
| 331 |
clocks = <&cru SCLK_TESTCLKOUT1>; |
| 332 |
clock-names = "xvclk"; |
| 333 |
|
| 334 |
avdd-supply = <&pp2800_cam>; |
| 335 |
dovdd-supply = <&pp1800_s0>; |
| 336 |
dvdd-supply = <&pp1800_s0>; |
| 337 |
reset-gpios = <&gpio2 3 GPIO_ACTIVE_LOW>; |
| 338 |
|
| 339 |
port { |
| 340 |
ucam_out: endpoint { |
| 341 |
remote-endpoint = <&mipi_in_ucam>; |
| 342 |
data-lanes = <1>; |
| 343 |
}; |
| 344 |
}; |
| 345 |
}; |
| 346 |
}; |
| 347 |
|
| 348 |
&cdn_dp { |
| 349 |
extcon = <&usbc_extcon0>; |
| 350 |
phys = <&tcphy0_dp>; |
| 351 |
}; |
| 352 |
|
| 353 |
&cpu_alert0 { |
| 354 |
temperature = <66000>; |
| 355 |
}; |
| 356 |
|
| 357 |
&cpu_alert1 { |
| 358 |
temperature = <71000>; |
| 359 |
}; |
| 360 |
|
| 361 |
&cros_ec { |
| 362 |
interrupt-parent = <&gpio1>; |
| 363 |
interrupts = <18 IRQ_TYPE_LEVEL_LOW>; |
| 364 |
}; |
| 365 |
|
| 366 |
&cru { |
| 367 |
assigned-clocks = |
| 368 |
<&cru PLL_GPLL>, <&cru PLL_CPLL>, |
| 369 |
<&cru PLL_NPLL>, |
| 370 |
<&cru ACLK_PERIHP>, <&cru HCLK_PERIHP>, |
| 371 |
<&cru PCLK_PERIHP>, |
| 372 |
<&cru ACLK_PERILP0>, <&cru HCLK_PERILP0>, |
| 373 |
<&cru PCLK_PERILP0>, <&cru ACLK_CCI>, |
| 374 |
<&cru HCLK_PERILP1>, <&cru PCLK_PERILP1>, |
| 375 |
<&cru ACLK_VIO>, |
| 376 |
<&cru ACLK_GIC_PRE>, |
| 377 |
<&cru PCLK_DDR>, |
| 378 |
<&cru ACLK_HDCP>, |
| 379 |
<&cru ACLK_VDU>; |
| 380 |
assigned-clock-rates = |
| 381 |
<600000000>, <1600000000>, |
| 382 |
<1000000000>, |
| 383 |
<150000000>, <75000000>, |
| 384 |
<37500000>, |
| 385 |
<100000000>, <100000000>, |
| 386 |
<50000000>, <800000000>, |
| 387 |
<100000000>, <50000000>, |
| 388 |
<400000000>, |
| 389 |
<200000000>, |
| 390 |
<200000000>, |
| 391 |
<400000000>, |
| 392 |
<400000000>; |
| 393 |
}; |
| 394 |
|
| 395 |
/* The center supply is fixed to .9V on scarlet */ |
| 396 |
&dmc { |
| 397 |
center-supply = <&pp900_s0>; |
| 398 |
}; |
| 399 |
|
| 400 |
/* We don't need .925 V for 928 MHz on scarlet */ |
| 401 |
&dmc_opp_table { |
| 402 |
opp03 { |
| 403 |
opp-microvolt = <900000>; |
| 404 |
}; |
| 405 |
}; |
| 406 |
|
| 407 |
&gpio0 { |
| 408 |
gpio-line-names = /* GPIO0 A 0-7 */ |
| 409 |
"CLK_32K_AP", |
| 410 |
"EC_IN_RW_OD", |
| 411 |
"SPK_PA_EN", |
| 412 |
"WLAN_PERST_1V8_L", |
| 413 |
"WLAN_PD_1V8_L", |
| 414 |
"WLAN_RF_KILL_1V8_L", |
| 415 |
"BIGCPU_DVS_PWM", |
| 416 |
"SD_CD_L_JTAG_EN", |
| 417 |
|
| 418 |
/* GPIO0 B 0-5 */ |
| 419 |
"BT_EN_BT_RF_KILL_1V8_L", |
| 420 |
"PMUIO2_33_18_L_PP3300_S0_EN", |
| 421 |
"TOUCH_RESET_L", |
| 422 |
"AP_EC_WARM_RESET_REQ", |
| 423 |
"PEN_RESET_L", |
| 424 |
/* |
| 425 |
* AP_FLASH_WP_L is crossystem ABI. Schematics call |
| 426 |
* it AP_FLASH_WP_R_ODL. |
| 427 |
*/ |
| 428 |
"AP_FLASH_WP_L"; |
| 429 |
}; |
| 430 |
|
| 431 |
&gpio1 { |
| 432 |
gpio-line-names = /* GPIO1 A 0-7 */ |
| 433 |
"PEN_INT_ODL", |
| 434 |
"PEN_EJECT_ODL", |
| 435 |
"BT_HOST_WAKE_1V8_L", |
| 436 |
"WLAN_HOST_WAKE_1V8_L", |
| 437 |
"TOUCH_INT_ODL", |
| 438 |
"AP_EC_S3_S0_L", |
| 439 |
"AP_EC_OVERTEMP", |
| 440 |
"AP_SPI_FLASH_MISO", |
| 441 |
|
| 442 |
/* GPIO1 B 0-7 */ |
| 443 |
"AP_SPI_FLASH_MOSI_R", |
| 444 |
"AP_SPI_FLASH_CLK_R", |
| 445 |
"AP_SPI_FLASH_CS_L_R", |
| 446 |
"SD_CARD_DET_ODL", |
| 447 |
"", |
| 448 |
"AP_EXPANSION_IO1", |
| 449 |
"AP_EXPANSION_IO2", |
| 450 |
"AP_I2C_DISP_SDA", |
| 451 |
|
| 452 |
/* GPIO1 C 0-7 */ |
| 453 |
"AP_I2C_DISP_SCL", |
| 454 |
"H1_INT_ODL", |
| 455 |
"EC_AP_INT_ODL", |
| 456 |
"LITCPU_DVS_PWM", |
| 457 |
"AP_I2C_AUDIO_SDA", |
| 458 |
"AP_I2C_AUDIO_SCL", |
| 459 |
"AP_EXPANSION_IO3", |
| 460 |
"HEADSET_INT_ODL", |
| 461 |
|
| 462 |
/* GPIO1 D0 */ |
| 463 |
"AP_EXPANSION_IO4"; |
| 464 |
}; |
| 465 |
|
| 466 |
&gpio2 { |
| 467 |
gpio-line-names = /* GPIO2 A 0-7 */ |
| 468 |
"AP_I2C_PEN_SDA", |
| 469 |
"AP_I2C_PEN_SCL", |
| 470 |
"SD_IO_PWR_EN", |
| 471 |
"UCAM_RST_L", |
| 472 |
"PP1250_CAM_EN", |
| 473 |
"WCAM_RST_L", |
| 474 |
"AP_EXPANSION_IO5", |
| 475 |
"AP_I2C_CAM_SDA", |
| 476 |
|
| 477 |
/* GPIO2 B 0-7 */ |
| 478 |
"AP_I2C_CAM_SCL", |
| 479 |
"AP_H1_SPI_MISO", |
| 480 |
"AP_H1_SPI_MOSI", |
| 481 |
"AP_H1_SPI_CLK", |
| 482 |
"AP_H1_SPI_CS_L", |
| 483 |
"", |
| 484 |
"", |
| 485 |
"", |
| 486 |
|
| 487 |
/* GPIO2 C 0-7 */ |
| 488 |
"UART_EXPANSION_TX_AP_RX", |
| 489 |
"UART_AP_TX_EXPANSION_RX", |
| 490 |
"UART_EXPANSION_RTS_AP_CTS", |
| 491 |
"UART_AP_RTS_EXPANSION_CTS", |
| 492 |
"AP_SPI_EC_MISO", |
| 493 |
"AP_SPI_EC_MOSI", |
| 494 |
"AP_SPI_EC_CLK", |
| 495 |
"AP_SPI_EC_CS_L", |
| 496 |
|
| 497 |
/* GPIO2 D 0-4 */ |
| 498 |
"PP2800_CAM_EN", |
| 499 |
"CLK_24M_CAM", |
| 500 |
"WLAN_PCIE_CLKREQ_1V8_L", |
| 501 |
"", |
| 502 |
"SD_PWR_3000_1800_L"; |
| 503 |
}; |
| 504 |
|
| 505 |
&gpio3 { |
| 506 |
gpio-line-names = /* GPIO3 A 0-7 */ |
| 507 |
"", |
| 508 |
"", |
| 509 |
"", |
| 510 |
"", |
| 511 |
"", |
| 512 |
"", |
| 513 |
"", |
| 514 |
"", |
| 515 |
|
| 516 |
/* GPIO3 B 0-7 */ |
| 517 |
"", |
| 518 |
"", |
| 519 |
"", |
| 520 |
"", |
| 521 |
"", |
| 522 |
"", |
| 523 |
"", |
| 524 |
"", |
| 525 |
|
| 526 |
/* GPIO3 C 0-7 */ |
| 527 |
"", |
| 528 |
"", |
| 529 |
"", |
| 530 |
"", |
| 531 |
"", |
| 532 |
"", |
| 533 |
"", |
| 534 |
"", |
| 535 |
|
| 536 |
/* GPIO3 D 0-7 */ |
| 537 |
"I2S0_SCLK", |
| 538 |
"I2S0_LRCK_RX", |
| 539 |
"I2S0_LRCK_TX", |
| 540 |
"I2S0_SDI_0", |
| 541 |
"STRAP_LCDBIAS_L", |
| 542 |
"STRAP_FEATURE_1", |
| 543 |
"STRAP_FEATURE_2", |
| 544 |
"I2S0_SDO_0"; |
| 545 |
}; |
| 546 |
|
| 547 |
&gpio4 { |
| 548 |
gpio-line-names = /* GPIO4 A 0-7 */ |
| 549 |
"I2S_MCLK", |
| 550 |
"AP_I2C_EXPANSION_SDA", |
| 551 |
"AP_I2C_EXPANSION_SCL", |
| 552 |
"DMIC_EN", |
| 553 |
"", |
| 554 |
"", |
| 555 |
"", |
| 556 |
"", |
| 557 |
|
| 558 |
/* GPIO4 B 0-7 */ |
| 559 |
"", |
| 560 |
"", |
| 561 |
"", |
| 562 |
"", |
| 563 |
"", |
| 564 |
"", |
| 565 |
"", |
| 566 |
"", |
| 567 |
|
| 568 |
/* GPIO4 C 0-7 */ |
| 569 |
"AP_I2C_TS_SDA", |
| 570 |
"AP_I2C_TS_SCL", |
| 571 |
"GPU_DVS_PWM", |
| 572 |
"UART_DBG_TX_AP_RX", |
| 573 |
"UART_AP_TX_DBG_RX", |
| 574 |
"BL_EN", |
| 575 |
"BL_PWM", |
| 576 |
"", |
| 577 |
|
| 578 |
/* GPIO4 D 0-5 */ |
| 579 |
"", |
| 580 |
"DISPLAY_RST_L", |
| 581 |
"", |
| 582 |
"PPVARP_LCD_EN", |
| 583 |
"PPVARN_LCD_EN", |
| 584 |
"SD_SLOT_PWR_EN"; |
| 585 |
}; |
| 586 |
|
| 587 |
&i2c_tunnel { |
| 588 |
google,remote-bus = <0>; |
| 589 |
}; |
| 590 |
|
| 591 |
&io_domains { |
| 592 |
bt656-supply = <&pp1800_s0>; /* APIO2_VDD; 2a 2b */ |
| 593 |
audio-supply = <&pp1800_s0>; /* APIO5_VDD; 3d 4a */ |
| 594 |
gpio1830-supply = <&pp1800_s0>; /* APIO4_VDD; 4c 4d */ |
| 595 |
}; |
| 596 |
|
| 597 |
&isp0 { |
| 598 |
status = "okay"; |
| 599 |
|
| 600 |
ports { |
| 601 |
port@0 { |
| 602 |
mipi_in_wcam: endpoint@0 { |
| 603 |
reg = <0>; |
| 604 |
remote-endpoint = <&wcam_out>; |
| 605 |
data-lanes = <1 2>; |
| 606 |
}; |
| 607 |
|
| 608 |
mipi_in_ucam: endpoint@1 { |
| 609 |
reg = <1>; |
| 610 |
remote-endpoint = <&ucam_out>; |
| 611 |
data-lanes = <1>; |
| 612 |
}; |
| 613 |
}; |
| 614 |
}; |
| 615 |
}; |
| 616 |
|
| 617 |
&isp0_mmu { |
| 618 |
status = "okay"; |
| 619 |
}; |
| 620 |
|
| 621 |
&max98357a { |
| 622 |
sdmode-gpios = <&gpio0 2 GPIO_ACTIVE_HIGH>; |
| 623 |
}; |
| 624 |
|
| 625 |
&mipi_dphy_rx0 { |
| 626 |
status = "okay"; |
| 627 |
}; |
| 628 |
|
| 629 |
&mipi_dsi { |
| 630 |
clock-master; |
| 631 |
#address-cells = <1>; |
| 632 |
#size-cells = <0>; |
| 633 |
status = "okay"; |
| 634 |
|
| 635 |
ports { |
| 636 |
mipi_out: port@1 { |
| 637 |
reg = <1>; |
| 638 |
|
| 639 |
mipi_out_panel: endpoint { |
| 640 |
remote-endpoint = <&mipi_in_panel>; |
| 641 |
}; |
| 642 |
}; |
| 643 |
}; |
| 644 |
|
| 645 |
mipi_panel: panel@0 { |
| 646 |
/* 2 different panels are used, compatibles are in dts files */ |
| 647 |
reg = <0>; |
| 648 |
backlight = <&backlight>; |
| 649 |
enable-gpios = <&gpio4 25 GPIO_ACTIVE_HIGH>; |
| 650 |
pinctrl-names = "default"; |
| 651 |
pinctrl-0 = <&display_rst_l>; |
| 652 |
|
| 653 |
ports { |
| 654 |
#address-cells = <1>; |
| 655 |
#size-cells = <0>; |
| 656 |
|
| 657 |
port@0 { |
| 658 |
reg = <0>; |
| 659 |
|
| 660 |
mipi_in_panel: endpoint { |
| 661 |
remote-endpoint = <&mipi_out_panel>; |
| 662 |
}; |
| 663 |
}; |
| 664 |
|
| 665 |
port@1 { |
| 666 |
reg = <1>; |
| 667 |
|
| 668 |
mipi1_in_panel: endpoint { |
| 669 |
remote-endpoint = <&mipi1_out_panel>; |
| 670 |
}; |
| 671 |
}; |
| 672 |
}; |
| 673 |
}; |
| 674 |
}; |
| 675 |
|
| 676 |
&mipi_dsi1 { |
| 677 |
status = "okay"; |
| 678 |
|
| 679 |
ports { |
| 680 |
mipi1_out: port@1 { |
| 681 |
reg = <1>; |
| 682 |
|
| 683 |
mipi1_out_panel: endpoint { |
| 684 |
remote-endpoint = <&mipi1_in_panel>; |
| 685 |
}; |
| 686 |
}; |
| 687 |
}; |
| 688 |
}; |
| 689 |
|
| 690 |
&pcie0 { |
| 691 |
ep-gpios = <&gpio0 3 GPIO_ACTIVE_HIGH>; |
| 692 |
|
| 693 |
/* PERST# asserted in S3 */ |
| 694 |
|
| 695 |
vpcie3v3-supply = <&wlan_3v3>; |
| 696 |
vpcie1v8-supply = <&pp1800_pcie>; |
| 697 |
}; |
| 698 |
|
| 699 |
&sdmmc { |
| 700 |
cd-gpios = <&gpio1 11 GPIO_ACTIVE_LOW>; |
| 701 |
}; |
| 702 |
|
| 703 |
&sound { |
| 704 |
rockchip,codec = <&max98357a &dmic &codec &cdn_dp>; |
| 705 |
}; |
| 706 |
|
| 707 |
&spi2 { |
| 708 |
status = "okay"; |
| 709 |
|
| 710 |
tpm@0 { |
| 711 |
compatible = "google,cr50"; |
| 712 |
reg = <0>; |
| 713 |
interrupt-parent = <&gpio1>; |
| 714 |
interrupts = <17 IRQ_TYPE_EDGE_RISING>; |
| 715 |
pinctrl-names = "default"; |
| 716 |
pinctrl-0 = <&h1_int_od_l>; |
| 717 |
spi-max-frequency = <800000>; |
| 718 |
}; |
| 719 |
}; |
| 720 |
|
| 721 |
&usb_host0_ohci { |
| 722 |
#address-cells = <1>; |
| 723 |
#size-cells = <0>; |
| 724 |
|
| 725 |
qca_bt: bluetooth@1 { |
| 726 |
compatible = "usbcf3,e300", "usb4ca,301a"; |
| 727 |
reg = <1>; |
| 728 |
pinctrl-names = "default"; |
| 729 |
pinctrl-0 = <&bt_host_wake_l>; |
| 730 |
interrupt-parent = <&gpio1>; |
| 731 |
interrupts = <2 IRQ_TYPE_LEVEL_HIGH>; |
| 732 |
interrupt-names = "wakeup"; |
| 733 |
}; |
| 734 |
}; |
| 735 |
|
| 736 |
/* PINCTRL OVERRIDES */ |
| 737 |
&ap_fw_wp { |
| 738 |
rockchip,pins = <0 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>; |
| 739 |
}; |
| 740 |
|
| 741 |
&bl_en { |
| 742 |
rockchip,pins = <4 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>; |
| 743 |
}; |
| 744 |
|
| 745 |
&bt_host_wake_l { |
| 746 |
rockchip,pins = <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>; |
| 747 |
}; |
| 748 |
|
| 749 |
&ec_ap_int_l { |
| 750 |
rockchip,pins = <1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_up>; |
| 751 |
}; |
| 752 |
|
| 753 |
&headset_int_l { |
| 754 |
rockchip,pins = <1 RK_PC7 RK_FUNC_GPIO &pcfg_pull_up>; |
| 755 |
}; |
| 756 |
|
| 757 |
&i2s0_8ch_bus { |
| 758 |
rockchip,pins = |
| 759 |
<3 RK_PD0 1 &pcfg_pull_none_6ma>, |
| 760 |
<3 RK_PD1 1 &pcfg_pull_none_6ma>, |
| 761 |
<3 RK_PD2 1 &pcfg_pull_none_6ma>, |
| 762 |
<3 RK_PD3 1 &pcfg_pull_none_6ma>, |
| 763 |
<3 RK_PD7 1 &pcfg_pull_none_6ma>, |
| 764 |
<4 RK_PA0 1 &pcfg_pull_none_6ma>; |
| 765 |
}; |
| 766 |
|
| 767 |
&i2s0_8ch_bus_bclk_off { |
| 768 |
rockchip,pins = |
| 769 |
<3 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none_6ma>, |
| 770 |
<3 RK_PD1 1 &pcfg_pull_none_6ma>, |
| 771 |
<3 RK_PD2 1 &pcfg_pull_none_6ma>, |
| 772 |
<3 RK_PD3 1 &pcfg_pull_none_6ma>, |
| 773 |
<3 RK_PD7 1 &pcfg_pull_none_6ma>, |
| 774 |
<4 RK_PA0 1 &pcfg_pull_none_6ma>; |
| 775 |
}; |
| 776 |
|
| 777 |
/* there is no external pull up, so need to set this pin pull up */ |
| 778 |
&sdmmc_cd_pin { |
| 779 |
rockchip,pins = <1 RK_PB3 RK_FUNC_GPIO &pcfg_pull_up>; |
| 780 |
}; |
| 781 |
|
| 782 |
&sd_pwr_1800_sel { |
| 783 |
rockchip,pins = <2 RK_PD4 RK_FUNC_GPIO &pcfg_pull_up>; |
| 784 |
}; |
| 785 |
|
| 786 |
&sdmode_en { |
| 787 |
rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_down>; |
| 788 |
}; |
| 789 |
|
| 790 |
&touch_reset_l { |
| 791 |
rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_down>; |
| 792 |
}; |
| 793 |
|
| 794 |
&touch_int_l { |
| 795 |
rockchip,pins = <1 RK_PA4 RK_FUNC_GPIO &pcfg_pull_down>; |
| 796 |
}; |
| 797 |
|
| 798 |
&pinctrl { |
| 799 |
pinctrl-0 = < |
| 800 |
&ap_pwroff /* AP will auto-assert this when in S3 */ |
| 801 |
&clk_32k /* This pin is always 32k on gru boards */ |
| 802 |
&wlan_rf_kill_1v8_l |
| 803 |
>; |
| 804 |
|
| 805 |
pcfg_pull_none_6ma: pcfg-pull-none-6ma { |
| 806 |
bias-disable; |
| 807 |
drive-strength = <6>; |
| 808 |
}; |
| 809 |
|
| 810 |
camera { |
| 811 |
pp1250_cam_en: pp1250-dvdd { |
| 812 |
rockchip,pins = <2 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>; |
| 813 |
}; |
| 814 |
|
| 815 |
pp2800_cam_en: pp2800-avdd { |
| 816 |
rockchip,pins = <2 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>; |
| 817 |
}; |
| 818 |
|
| 819 |
ucam_rst: ucam_rst { |
| 820 |
rockchip,pins = <2 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>; |
| 821 |
}; |
| 822 |
|
| 823 |
wcam_rst: wcam_rst { |
| 824 |
rockchip,pins = <2 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>; |
| 825 |
}; |
| 826 |
}; |
| 827 |
|
| 828 |
digitizer { |
| 829 |
pen_int_odl: pen-int-odl { |
| 830 |
rockchip,pins = <1 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up>; |
| 831 |
}; |
| 832 |
|
| 833 |
pen_reset_l: pen-reset-l { |
| 834 |
rockchip,pins = <0 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>; |
| 835 |
}; |
| 836 |
}; |
| 837 |
|
| 838 |
discretes { |
| 839 |
display_rst_l: display-rst-l { |
| 840 |
rockchip,pins = <4 RK_PD1 RK_FUNC_GPIO &pcfg_pull_down>; |
| 841 |
}; |
| 842 |
|
| 843 |
ppvarp_lcd_en: ppvarp-lcd-en { |
| 844 |
rockchip,pins = <4 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>; |
| 845 |
}; |
| 846 |
|
| 847 |
ppvarn_lcd_en: ppvarn-lcd-en { |
| 848 |
rockchip,pins = <4 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>; |
| 849 |
}; |
| 850 |
}; |
| 851 |
|
| 852 |
dmic { |
| 853 |
dmic_en: dmic-en { |
| 854 |
rockchip,pins = <4 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>; |
| 855 |
}; |
| 856 |
}; |
| 857 |
|
| 858 |
pen { |
| 859 |
pen_eject_odl: pen-eject-odl { |
| 860 |
rockchip,pins = <1 RK_PA1 RK_FUNC_GPIO &pcfg_pull_up>; |
| 861 |
}; |
| 862 |
}; |
| 863 |
|
| 864 |
tpm { |
| 865 |
h1_int_od_l: h1-int-od-l { |
| 866 |
rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_up>; |
| 867 |
}; |
| 868 |
}; |
| 869 |
}; |
| 870 |
|
| 871 |
&wifi { |
| 872 |
bt_en_1v8_l: bt-en-1v8-l { |
| 873 |
rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>; |
| 874 |
}; |
| 875 |
|
| 876 |
wlan_pd_1v8_l: wlan-pd-1v8-l { |
| 877 |
rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>; |
| 878 |
}; |
| 879 |
|
| 880 |
/* Default pull-up, but just to be clear */ |
| 881 |
wlan_rf_kill_1v8_l: wlan-rf-kill-1v8-l { |
| 882 |
rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>; |
| 883 |
}; |
| 884 |
|
| 885 |
wifi_perst_l: wifi-perst-l { |
| 886 |
rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>; |
| 887 |
}; |
| 888 |
|
| 889 |
wlan_host_wake_l: wlan-host-wake-l { |
| 890 |
rockchip,pins = <1 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>; |
| 891 |
}; |
| 892 |
}; |