Debian Codegraph @

scripts/dtc/include-prefixes/arm64/rockchip/rk3399-gru-chromebook.dtsi

raw
1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
2 /*
3 * Google Gru-Chromebook shared properties
4 *
5 * Copyright 2018 Google, Inc
6 */
7
8 #include "rk3399-gru.dtsi"
9
10 / {
11 pp900_ap: regulator-pp900-ap {
12 compatible = "regulator-fixed";
13 regulator-name = "pp900_ap";
14
15 /* EC turns on w/ pp900_ap_en; always on for AP */
16 regulator-always-on;
17 regulator-boot-on;
18 regulator-min-microvolt = <900000>;
19 regulator-max-microvolt = <900000>;
20
21 vin-supply = <&ppvar_sys>;
22 };
23
24 /* EC turns on w/ pp900_usb_en */
25 pp900_usb: regulator-pp900-ap {
26 };
27
28 /* EC turns on w/ pp900_pcie_en */
29 pp900_pcie: regulator-pp900-ap {
30 };
31
32 pp3000: regulator-pp3000 {
33 compatible = "regulator-fixed";
34 regulator-name = "pp3000";
35 pinctrl-names = "default";
36 pinctrl-0 = <&pp3000_en>;
37
38 enable-active-high;
39 gpio = <&gpio0 12 GPIO_ACTIVE_HIGH>;
40
41 regulator-always-on;
42 regulator-boot-on;
43 regulator-min-microvolt = <3000000>;
44 regulator-max-microvolt = <3000000>;
45
46 vin-supply = <&ppvar_sys>;
47 };
48
49 ppvar_centerlogic_pwm: regulator-ppvar-centerlogic-pwm {
50 compatible = "pwm-regulator";
51 regulator-name = "ppvar_centerlogic_pwm";
52
53 pwms = <&pwm3 0 3337 0>;
54 pwm-supply = <&ppvar_sys>;
55 pwm-dutycycle-range = <100 0>;
56 pwm-dutycycle-unit = <100>;
57
58 /* EC turns on w/ ppvar_centerlogic_en; always on for AP */
59 regulator-always-on;
60 regulator-boot-on;
61 regulator-min-microvolt = <799434>;
62 regulator-max-microvolt = <1049925>;
63 };
64
65 ppvar_centerlogic: ppvar-centerlogic {
66 compatible = "vctrl-regulator";
67 regulator-name = "ppvar_centerlogic";
68
69 regulator-min-microvolt = <799434>;
70 regulator-max-microvolt = <1049925>;
71
72 ctrl-supply = <&ppvar_centerlogic_pwm>;
73 ctrl-voltage-range = <799434 1049925>;
74
75 regulator-settling-time-up-us = <378>;
76 min-slew-down-rate = <225>;
77 ovp-threshold-percent = <16>;
78 };
79
80 /* Schematics call this PPVAR even though it's fixed */
81 ppvar_logic: regulator-ppvar-logic {
82 compatible = "regulator-fixed";
83 regulator-name = "ppvar_logic";
84
85 /* EC turns on w/ ppvar_logic_en; always on for AP */
86 regulator-always-on;
87 regulator-boot-on;
88 regulator-min-microvolt = <900000>;
89 regulator-max-microvolt = <900000>;
90
91 vin-supply = <&ppvar_sys>;
92 };
93
94 pp1800_audio: regulator-pp1800-audio {
95 compatible = "regulator-fixed";
96 regulator-name = "pp1800_audio";
97 pinctrl-names = "default";
98 pinctrl-0 = <&pp1800_audio_en>;
99
100 enable-active-high;
101 gpio = <&gpio0 2 GPIO_ACTIVE_HIGH>;
102
103 regulator-always-on;
104 regulator-boot-on;
105
106 vin-supply = <&pp1800>;
107 };
108
109 /* gpio is shared with pp3300_wifi_bt */
110 pp1800_pcie: regulator-pp1800-pcie {
111 compatible = "regulator-fixed";
112 regulator-name = "pp1800_pcie";
113 pinctrl-names = "default";
114 pinctrl-0 = <&wlan_module_pd_l>;
115
116 enable-active-high;
117 gpio = <&gpio0 4 GPIO_ACTIVE_HIGH>;
118
119 /*
120 * Need to wait 1ms + ramp-up time before we can power on WiFi.
121 * This has been approximated as 8ms total.
122 */
123 regulator-enable-ramp-delay = <8000>;
124
125 vin-supply = <&pp1800>;
126 };
127
128 /* Always on; plain and simple */
129 pp3000_ap: pp3000_emmc: regulator-pp3000 {
130 };
131
132 pp1500_ap_io: regulator-pp1500-ap-io {
133 compatible = "regulator-fixed";
134 regulator-name = "pp1500_ap_io";
135 pinctrl-names = "default";
136 pinctrl-0 = <&pp1500_en>;
137
138 enable-active-high;
139 gpio = <&gpio0 10 GPIO_ACTIVE_HIGH>;
140
141 regulator-always-on;
142 regulator-boot-on;
143 regulator-min-microvolt = <1500000>;
144 regulator-max-microvolt = <1500000>;
145
146 vin-supply = <&pp1800>;
147 };
148
149 pp3300_disp: regulator-pp3300-disp {
150 compatible = "regulator-fixed";
151 regulator-name = "pp3300_disp";
152 pinctrl-names = "default";
153 pinctrl-0 = <&pp3300_disp_en>;
154
155 enable-active-high;
156 gpio = <&gpio4 27 GPIO_ACTIVE_HIGH>;
157
158 startup-delay-us = <2000>;
159 vin-supply = <&pp3300>;
160 };
161
162 /* EC turns on w/ pp3300_usb_en_l */
163 pp3300_usb: regulator-pp3300 {
164 };
165
166 /* gpio is shared with pp1800_pcie and pinctrl is set there */
167 pp3300_wifi_bt: regulator-pp3300-wifi-bt {
168 compatible = "regulator-fixed";
169 regulator-name = "pp3300_wifi_bt";
170
171 enable-active-high;
172 gpio = <&gpio0 4 GPIO_ACTIVE_HIGH>;
173
174 vin-supply = <&pp3300>;
175 };
176
177 /*
178 * This is a bit of a hack. The WiFi module should be reset at least
179 * 1ms after its regulators have ramped up (max rampup time is ~7ms).
180 * With some stretching of the imagination, we can call the 1.8V
181 * regulator a supply.
182 */
183 wlan_pd_n: regulator-wlan-pd-n {
184 compatible = "regulator-fixed";
185 regulator-name = "wlan_pd_n";
186 pinctrl-names = "default";
187 pinctrl-0 = <&wlan_module_reset_l>;
188
189 enable-active-high;
190 gpio = <&gpio1 11 GPIO_ACTIVE_HIGH>;
191
192 vin-supply = <&pp1800_pcie>;
193 };
194
195 backlight: backlight {
196 compatible = "pwm-backlight";
197 enable-gpios = <&gpio1 17 GPIO_ACTIVE_HIGH>;
198 power-supply = <&pp3300_disp>;
199 pinctrl-names = "default";
200 pinctrl-0 = <&bl_en>;
201 };
202
203 gpio_keys: gpio-keys {
204 compatible = "gpio-keys";
205 pinctrl-names = "default";
206 pinctrl-0 = <&bt_host_wake_l>;
207
208 wake_on_bt: key-wake-on-bt {
209 label = "Wake-on-Bluetooth";
210 gpios = <&gpio0 3 GPIO_ACTIVE_LOW>;
211 linux,code = <KEY_WAKEUP>;
212 wakeup-source;
213 };
214 };
215 };
216
217 &ppvar_bigcpu {
218 min-slew-down-rate = <225>;
219 ovp-threshold-percent = <16>;
220 };
221
222 &ppvar_litcpu {
223 min-slew-down-rate = <225>;
224 ovp-threshold-percent = <16>;
225 };
226
227 &ppvar_gpu {
228 min-slew-down-rate = <225>;
229 ovp-threshold-percent = <16>;
230 };
231
232 &cdn_dp {
233 extcon = <&usbc_extcon0>, <&usbc_extcon1>;
234 };
235
236 &dmc {
237 center-supply = <&ppvar_centerlogic>;
238 rockchip,pd-idle-dis-freq-hz = <800000000>;
239 rockchip,sr-idle-dis-freq-hz = <800000000>;
240 rockchip,sr-mc-gate-idle-dis-freq-hz = <800000000>;
241 };
242
243 &edp {
244 status = "okay";
245
246 /*
247 * eDP PHY/clk don't sync reliably at anything other than 24 MHz. Only
248 * set this here, because rk3399-gru.dtsi ensures we can generate this
249 * off GPLL=600MHz, whereas some other RK3399 boards may not.
250 */
251 assigned-clocks = <&cru PCLK_EDP>;
252 assigned-clock-rates = <24000000>;
253 };
254
255 &edp_out {
256 edp_out_panel: endpoint {
257 remote-endpoint = <&panel_in_edp>;
258 };
259 };
260
261 &gpio0 {
262 gpio-line-names = /* GPIO0 A 0-7 */
263 "AP_RTC_CLK_IN",
264 "EC_AP_INT_L",
265 "PP1800_AUDIO_EN",
266 "BT_HOST_WAKE_L",
267 "WLAN_MODULE_PD_L",
268 "H1_INT_OD_L",
269 "CENTERLOGIC_DVS_PWM",
270 "",
271
272 /* GPIO0 B 0-4 */
273 "WIFI_HOST_WAKE_L",
274 "PMUIO2_33_18_L",
275 "PP1500_EN",
276 "AP_EC_WARM_RESET_REQ",
277 "PP3000_EN";
278 };
279
280 &gpio1 {
281 gpio-line-names = /* GPIO1 A 0-7 */
282 "",
283 "",
284 "SPK_PA_EN",
285 "",
286 "TRACKPAD_INT_L",
287 "AP_EC_S3_S0_L",
288 "AP_EC_OVERTEMP",
289 "AP_SPI_FLASH_MISO",
290
291 /* GPIO1 B 0-7 */
292 "AP_SPI_FLASH_MOSI_R",
293 "AP_SPI_FLASH_CLK_R",
294 "AP_SPI_FLASH_CS_L_R",
295 "WLAN_MODULE_RESET_L",
296 "WIFI_DISABLE_L",
297 "MIC_INT",
298 "",
299 "AP_I2C_DVS_SDA",
300
301 /* GPIO1 C 0-7 */
302 "AP_I2C_DVS_SCL",
303 "AP_BL_EN",
304 /*
305 * AP_FLASH_WP is crossystem ABI. Schematics call it
306 * AP_FW_WP or CPU1_FW_WP, depending on the variant.
307 */
308 "AP_FLASH_WP",
309 "LITCPU_DVS_PWM",
310 "AP_I2C_AUDIO_SDA",
311 "AP_I2C_AUDIO_SCL",
312 "",
313 "HEADSET_INT_L";
314 };
315
316 &gpio2 {
317 gpio-line-names = /* GPIO2 A 0-7 */
318 "",
319 "",
320 "SD_IO_PWR_EN",
321 "",
322 "",
323 "",
324 "",
325 "",
326
327 /* GPIO2 B 0-7 */
328 "",
329 "",
330 "",
331 "",
332 "",
333 "",
334 "",
335 "",
336
337 /* GPIO2 C 0-7 */
338 "",
339 "",
340 "",
341 "",
342 "AP_SPI_EC_MISO",
343 "AP_SPI_EC_MOSI",
344 "AP_SPI_EC_CLK",
345 "AP_SPI_EC_CS_L",
346
347 /* GPIO2 D 0-4 */
348 "BT_DEV_WAKE_L",
349 "",
350 "WIFI_PCIE_CLKREQ_L",
351 "WIFI_PERST_L",
352 "SD_PWR_3000_1800_L";
353 };
354
355 &gpio3 {
356 gpio-line-names = /* GPIO3 A 0-7 */
357 "",
358 "",
359 "",
360 "",
361 "AP_SPI_TPM_MISO",
362 "AP_SPI_TPM_MOSI_R",
363 "AP_SPI_TPM_CLK_R",
364 "AP_SPI_TPM_CS_L_R",
365
366 /* GPIO3 B 0-7 */
367 "EC_IN_RW",
368 "",
369 "AP_I2C_TP_SDA",
370 "AP_I2C_TP_SCL",
371 "AP_I2C_TP_PU_EN",
372 "TOUCH_INT_L",
373 "",
374 "",
375
376 /* GPIO3 C 0-7 */
377 "",
378 "",
379 "",
380 "",
381 "",
382 "",
383 "",
384 "",
385
386 /* GPIO3 D 0-7 */
387 "I2S0_SCLK",
388 "I2S0_LRCK_RX",
389 "I2S0_LRCK_TX",
390 "I2S0_SDI_0",
391 "I2S0_SDI_1",
392 "",
393 "I2S0_SDO_1",
394 "I2S0_SDO_0";
395 };
396
397 &gpio4 {
398 gpio-line-names = /* GPIO4 A 0-7 */
399 "I2S_MCLK",
400 "AP_I2C_MIC_SDA",
401 "AP_I2C_MIC_SCL",
402 "",
403 "",
404 "",
405 "",
406 "",
407
408 /* GPIO4 B 0-7 */
409 "",
410 "",
411 "",
412 "",
413 "",
414 "",
415 "",
416 "",
417
418 /* GPIO4 C 0-7 */
419 "AP_I2C_TS_SDA",
420 "AP_I2C_TS_SCL",
421 "GPU_DVS_PWM",
422 "UART_DBG_TX_AP_RX",
423 "UART_AP_TX_DBG_RX",
424 "",
425 "BIGCPU_DVS_PWM",
426 "EDP_HPD_3V0",
427
428 /* GPIO4 D 0-5 */
429 "SD_CARD_DET_L",
430 "USB_DP_HPD",
431 "TOUCH_RESET_L",
432 "PP3300_DISP_EN",
433 "",
434 "SD_SLOT_PWR_EN";
435 };
436
437 ap_i2c_mic: &i2c1 {
438 status = "okay";
439
440 clock-frequency = <400000>;
441
442 /* These are relatively safe rise/fall times */
443 i2c-scl-falling-time-ns = <50>;
444 i2c-scl-rising-time-ns = <300>;
445
446 headsetcodec: rt5514@57 {
447 compatible = "realtek,rt5514";
448 reg = <0x57>;
449 realtek,dmic-init-delay-ms = <20>;
450 };
451 };
452
453 ap_i2c_tp: &i2c5 {
454 status = "okay";
455
456 clock-frequency = <400000>;
457
458 /* These are relatively safe rise/fall times */
459 i2c-scl-falling-time-ns = <50>;
460 i2c-scl-rising-time-ns = <300>;
461
462 /*
463 * Note strange pullup enable. Apparently this avoids leakage but
464 * still allows us to get nice 4.7K pullups for high speed i2c
465 * transfers. Basically we want the pullup on whenever the ap is
466 * alive, so the "en" pin just gets set to output high.
467 */
468 pinctrl-0 = <&i2c5_xfer &ap_i2c_tp_pu_en>;
469 };
470
471 &cros_ec {
472 cros_ec_pwm: pwm {
473 compatible = "google,cros-ec-pwm";
474 #pwm-cells = <1>;
475 };
476
477 usbc_extcon1: extcon1 {
478 compatible = "google,extcon-usbc-cros-ec";
479 google,usb-port-id = <1>;
480 };
481 };
482
483 &sound {
484 rockchip,codec = <&max98357a &headsetcodec
485 &codec &wacky_spi_audio &cdn_dp>;
486 };
487
488 &spi2 {
489 wacky_spi_audio: spi2@0 {
490 compatible = "realtek,rt5514";
491 reg = <0>;
492 interrupt-parent = <&gpio1>;
493 interrupts = <13 IRQ_TYPE_LEVEL_HIGH>;
494 pinctrl-names = "default";
495 pinctrl-0 = <&mic_int>;
496 /* May run faster once verified. */
497 spi-max-frequency = <10000000>;
498 wakeup-source;
499 };
500 };
501
502 &pci_rootport {
503 mvl_wifi: wifi@0,0 {
504 compatible = "pci1b4b,2b42";
505 reg = <0x0000 0x0 0x0 0x0 0x0>;
506 interrupt-parent = <&gpio0>;
507 interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
508 pinctrl-names = "default";
509 pinctrl-0 = <&wlan_host_wake_l>;
510 wakeup-source;
511 };
512 };
513
514 &tcphy1 {
515 status = "okay";
516 extcon = <&usbc_extcon1>;
517 };
518
519 &u2phy1 {
520 status = "okay";
521 };
522
523 &usb_host0_ehci {
524 status = "okay";
525 };
526
527 &usb_host1_ehci {
528 status = "okay";
529 };
530
531 &usb_host1_ohci {
532 status = "okay";
533 };
534
535 &usbdrd3_1 {
536 status = "okay";
537 extcon = <&usbc_extcon1>;
538 };
539
540 &usbdrd_dwc3_1 {
541 status = "okay";
542 dr_mode = "host";
543 };
544
545 &pinctrl {
546 discretes {
547 pp1500_en: pp1500-en {
548 rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO
549 &pcfg_pull_none>;
550 };
551
552 pp1800_audio_en: pp1800-audio-en {
553 rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO
554 &pcfg_pull_down>;
555 };
556
557 pp3000_en: pp3000-en {
558 rockchip,pins = <0 RK_PB4 RK_FUNC_GPIO
559 &pcfg_pull_none>;
560 };
561
562 pp3300_disp_en: pp3300-disp-en {
563 rockchip,pins = <4 RK_PD3 RK_FUNC_GPIO
564 &pcfg_pull_none>;
565 };
566
567 wlan_module_pd_l: wlan-module-pd-l {
568 rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO
569 &pcfg_pull_down>;
570 };
571 };
572 };
573
574 &wifi {
575 wifi_perst_l: wifi-perst-l {
576 rockchip,pins = <2 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>;
577 };
578
579 wlan_host_wake_l: wlan-host-wake-l {
580 /* Kevin has an external pull up, but Bob does not */
581 rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
582 };
583 };