| 1 |
// SPDX-License-Identifier: (GPL-2.0+ OR MIT) |
| 2 |
/* |
| 3 |
* Copyright (c) 2016 Matthias Brugger <[email protected]> |
| 4 |
*/ |
| 5 |
|
| 6 |
/dts-v1/; |
| 7 |
#include <dt-bindings/input/input.h> |
| 8 |
#include "rk3368.dtsi" |
| 9 |
|
| 10 |
/ { |
| 11 |
model = "Rockchip Orion R68"; |
| 12 |
compatible = "tronsmart,orion-r68-meta", "rockchip,rk3368"; |
| 13 |
|
| 14 |
aliases { |
| 15 |
ethernet0 = &gmac; |
| 16 |
mmc0 = &sdmmc; |
| 17 |
mmc1 = &emmc; |
| 18 |
}; |
| 19 |
|
| 20 |
chosen { |
| 21 |
stdout-path = "serial2:115200n8"; |
| 22 |
}; |
| 23 |
|
| 24 |
memory@0 { |
| 25 |
device_type = "memory"; |
| 26 |
reg = <0x0 0x0 0x0 0x80000000>; |
| 27 |
}; |
| 28 |
|
| 29 |
emmc_pwrseq: emmc-pwrseq { |
| 30 |
compatible = "mmc-pwrseq-emmc"; |
| 31 |
pinctrl-0 = <&emmc_reset>; |
| 32 |
pinctrl-names = "default"; |
| 33 |
reset-gpios = <&gpio2 RK_PA3 GPIO_ACTIVE_HIGH>; |
| 34 |
}; |
| 35 |
|
| 36 |
ext_gmac: external-gmac-clock { |
| 37 |
compatible = "fixed-clock"; |
| 38 |
#clock-cells = <0>; |
| 39 |
clock-frequency = <125000000>; |
| 40 |
clock-output-names = "ext_gmac"; |
| 41 |
}; |
| 42 |
|
| 43 |
keys: gpio-keys { |
| 44 |
compatible = "gpio-keys"; |
| 45 |
pinctrl-names = "default"; |
| 46 |
pinctrl-0 = <&pwr_key>; |
| 47 |
|
| 48 |
key-power { |
| 49 |
wakeup-source; |
| 50 |
gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>; |
| 51 |
label = "GPIO Power"; |
| 52 |
linux,code = <KEY_POWER>; |
| 53 |
}; |
| 54 |
}; |
| 55 |
|
| 56 |
leds: gpio-leds { |
| 57 |
compatible = "gpio-leds"; |
| 58 |
|
| 59 |
red_led: led-0 { |
| 60 |
gpios = <&gpio3 RK_PD5 GPIO_ACTIVE_HIGH>; |
| 61 |
label = "orion:red:led"; |
| 62 |
pinctrl-names = "default"; |
| 63 |
pinctrl-0 = <&led_ctl>; |
| 64 |
default-state = "on"; |
| 65 |
}; |
| 66 |
|
| 67 |
blue_led: led-1 { |
| 68 |
gpios = <&gpio0 RK_PB4 GPIO_ACTIVE_HIGH>; |
| 69 |
label = "orion:blue:led"; |
| 70 |
pinctrl-names = "default"; |
| 71 |
pinctrl-0 = <&stby_pwren>; |
| 72 |
default-state = "off"; |
| 73 |
}; |
| 74 |
}; |
| 75 |
|
| 76 |
vcc_18: regulator-vcc18 { |
| 77 |
compatible = "regulator-fixed"; |
| 78 |
regulator-name = "vcc_18"; |
| 79 |
regulator-min-microvolt = <1800000>; |
| 80 |
regulator-max-microvolt = <1800000>; |
| 81 |
regulator-always-on; |
| 82 |
regulator-boot-on; |
| 83 |
vin-supply = <&vcc_sys>; |
| 84 |
}; |
| 85 |
|
| 86 |
/* supplies both host and otg */ |
| 87 |
vcc_host: regulator-vcc-host { |
| 88 |
compatible = "regulator-fixed"; |
| 89 |
gpio = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>; |
| 90 |
pinctrl-names = "default"; |
| 91 |
pinctrl-0 = <&host_vbus_drv>; |
| 92 |
regulator-name = "vcc_host"; |
| 93 |
regulator-always-on; |
| 94 |
regulator-boot-on; |
| 95 |
vin-supply = <&vcc_sys>; |
| 96 |
}; |
| 97 |
|
| 98 |
vcc_io: regulator-vcc-io { |
| 99 |
compatible = "regulator-fixed"; |
| 100 |
regulator-name = "vcc_io"; |
| 101 |
regulator-min-microvolt = <3300000>; |
| 102 |
regulator-max-microvolt = <3300000>; |
| 103 |
regulator-always-on; |
| 104 |
regulator-boot-on; |
| 105 |
vin-supply = <&vcc_sys>; |
| 106 |
}; |
| 107 |
|
| 108 |
vcc_lan: regulator-vcc-lan { |
| 109 |
compatible = "regulator-fixed"; |
| 110 |
regulator-name = "vcc_lan"; |
| 111 |
regulator-min-microvolt = <3300000>; |
| 112 |
regulator-max-microvolt = <3300000>; |
| 113 |
regulator-always-on; |
| 114 |
regulator-boot-on; |
| 115 |
vin-supply = <&vcc_io>; |
| 116 |
}; |
| 117 |
|
| 118 |
vcc_sd: regulator-vcc-sd { |
| 119 |
compatible = "regulator-fixed"; |
| 120 |
regulator-name = "vcc_sd"; |
| 121 |
gpio = <&gpio3 RK_PB3 GPIO_ACTIVE_LOW>; |
| 122 |
regulator-min-microvolt = <1800000>; |
| 123 |
regulator-max-microvolt = <3300000>; |
| 124 |
vin-supply = <&vcc_io>; |
| 125 |
}; |
| 126 |
|
| 127 |
vcc_sys: regulator-vcc-sys { |
| 128 |
compatible = "regulator-fixed"; |
| 129 |
regulator-name = "vcc_sys"; |
| 130 |
regulator-min-microvolt = <5000000>; |
| 131 |
regulator-max-microvolt = <5000000>; |
| 132 |
regulator-always-on; |
| 133 |
regulator-boot-on; |
| 134 |
}; |
| 135 |
|
| 136 |
vccio_sd: regulator-vcc-io-sd { |
| 137 |
compatible = "regulator-fixed"; |
| 138 |
regulator-name = "vccio_sd"; |
| 139 |
regulator-min-microvolt = <1800000>; |
| 140 |
regulator-max-microvolt = <3300000>; |
| 141 |
regulator-always-on; |
| 142 |
regulator-boot-on; |
| 143 |
vin-supply = <&vcc_io>; |
| 144 |
}; |
| 145 |
|
| 146 |
vccio_wl: regulator-vccio-wl { |
| 147 |
compatible = "regulator-fixed"; |
| 148 |
regulator-name = "vccio_wl"; |
| 149 |
regulator-min-microvolt = <3300000>; |
| 150 |
regulator-max-microvolt = <3300000>; |
| 151 |
regulator-always-on; |
| 152 |
regulator-boot-on; |
| 153 |
vin-supply = <&vcc_io>; |
| 154 |
}; |
| 155 |
|
| 156 |
vdd_10: regulator-vdd-10 { |
| 157 |
compatible = "regulator-fixed"; |
| 158 |
regulator-name = "vdd_10"; |
| 159 |
regulator-min-microvolt = <1000000>; |
| 160 |
regulator-max-microvolt = <1000000>; |
| 161 |
regulator-always-on; |
| 162 |
regulator-boot-on; |
| 163 |
vin-supply = <&vcc_sys>; |
| 164 |
}; |
| 165 |
}; |
| 166 |
|
| 167 |
&emmc { |
| 168 |
bus-width = <8>; |
| 169 |
cap-mmc-highspeed; |
| 170 |
mmc-pwrseq = <&emmc_pwrseq>; |
| 171 |
mmc-hs200-1_2v; |
| 172 |
mmc-hs200-1_8v; |
| 173 |
non-removable; |
| 174 |
pinctrl-names = "default"; |
| 175 |
pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus8>; |
| 176 |
status = "okay"; |
| 177 |
}; |
| 178 |
|
| 179 |
&gmac { |
| 180 |
assigned-clocks = <&cru SCLK_MAC>; |
| 181 |
assigned-clock-parents = <&ext_gmac>; |
| 182 |
clock_in_out = "input"; |
| 183 |
phy-supply = <&vcc_lan>; |
| 184 |
phy-mode = "rgmii"; |
| 185 |
pinctrl-names = "default"; |
| 186 |
pinctrl-0 = <&rgmii_pins>; |
| 187 |
snps,reset-gpio = <&gpio3 RK_PB4 GPIO_ACTIVE_HIGH>; |
| 188 |
snps,reset-active-low; |
| 189 |
snps,reset-delays-us = <0 10000 1000000>; |
| 190 |
tx_delay = <0x30>; |
| 191 |
rx_delay = <0x10>; |
| 192 |
status = "okay"; |
| 193 |
}; |
| 194 |
|
| 195 |
&i2c0 { |
| 196 |
status = "okay"; |
| 197 |
|
| 198 |
vdd_cpu: syr827@40 { |
| 199 |
compatible = "silergy,syr827"; |
| 200 |
reg = <0x40>; |
| 201 |
fcs,suspend-voltage-selector = <1>; |
| 202 |
regulator-name = "vdd_cpu"; |
| 203 |
regulator-enable-ramp-delay = <300>; |
| 204 |
regulator-min-microvolt = <712500>; |
| 205 |
regulator-max-microvolt = <1500000>; |
| 206 |
regulator-ramp-delay = <8000>; |
| 207 |
regulator-always-on; |
| 208 |
regulator-boot-on; |
| 209 |
vin-supply = <&vcc_sys>; |
| 210 |
}; |
| 211 |
|
| 212 |
hym8563: rtc@51 { |
| 213 |
compatible = "haoyu,hym8563"; |
| 214 |
reg = <0x51>; |
| 215 |
#clock-cells = <0>; |
| 216 |
clock-output-names = "xin32k"; |
| 217 |
/* rtc_int is not connected */ |
| 218 |
}; |
| 219 |
}; |
| 220 |
|
| 221 |
&pinctrl { |
| 222 |
pcfg_pull_none_drv_8ma: pcfg-pull-none-drv-8ma { |
| 223 |
bias-disable; |
| 224 |
drive-strength = <8>; |
| 225 |
}; |
| 226 |
|
| 227 |
pcfg_pull_up_drv_8ma: pcfg-pull-up-drv-8ma { |
| 228 |
bias-pull-up; |
| 229 |
drive-strength = <8>; |
| 230 |
}; |
| 231 |
|
| 232 |
emmc { |
| 233 |
emmc_bus8: emmc-bus8 { |
| 234 |
rockchip,pins = <1 RK_PC2 2 &pcfg_pull_up_drv_8ma>, |
| 235 |
<1 RK_PC3 2 &pcfg_pull_up_drv_8ma>, |
| 236 |
<1 RK_PC4 2 &pcfg_pull_up_drv_8ma>, |
| 237 |
<1 RK_PC5 2 &pcfg_pull_up_drv_8ma>, |
| 238 |
<1 RK_PC6 2 &pcfg_pull_up_drv_8ma>, |
| 239 |
<1 RK_PC7 2 &pcfg_pull_up_drv_8ma>, |
| 240 |
<1 RK_PD0 2 &pcfg_pull_up_drv_8ma>, |
| 241 |
<1 RK_PD1 2 &pcfg_pull_up_drv_8ma>; |
| 242 |
}; |
| 243 |
|
| 244 |
emmc-clk { |
| 245 |
rockchip,pins = <2 RK_PA4 2 &pcfg_pull_none_drv_8ma>; |
| 246 |
}; |
| 247 |
|
| 248 |
emmc-cmd { |
| 249 |
rockchip,pins = <1 RK_PD2 2 &pcfg_pull_up_drv_8ma>; |
| 250 |
}; |
| 251 |
|
| 252 |
emmc_reset: emmc-reset { |
| 253 |
rockchip,pins = <2 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>; |
| 254 |
}; |
| 255 |
}; |
| 256 |
|
| 257 |
keys { |
| 258 |
pwr_key: pwr-key { |
| 259 |
rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_down>; |
| 260 |
}; |
| 261 |
}; |
| 262 |
|
| 263 |
leds { |
| 264 |
stby_pwren: stby-pwren { |
| 265 |
rockchip,pins = <0 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>; |
| 266 |
}; |
| 267 |
|
| 268 |
led_ctl: led-ctl { |
| 269 |
rockchip,pins = <3 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>; |
| 270 |
}; |
| 271 |
}; |
| 272 |
|
| 273 |
sdmmc { |
| 274 |
sdmmc_clk: sdmmc-clk { |
| 275 |
rockchip,pins = <2 RK_PB1 1 &pcfg_pull_none_drv_8ma>; |
| 276 |
}; |
| 277 |
|
| 278 |
sdmmc_cmd: sdmmc-cmd { |
| 279 |
rockchip,pins = <2 RK_PB2 1 &pcfg_pull_up_drv_8ma>; |
| 280 |
}; |
| 281 |
|
| 282 |
sdmmc_cd: sdmmc-cd { |
| 283 |
rockchip,pins = <2 RK_PB3 1 &pcfg_pull_up_drv_8ma>; |
| 284 |
}; |
| 285 |
|
| 286 |
sdmmc_bus1: sdmmc-bus1 { |
| 287 |
rockchip,pins = <2 RK_PA5 1 &pcfg_pull_up_drv_8ma>; |
| 288 |
}; |
| 289 |
|
| 290 |
sdmmc_bus4: sdmmc-bus4 { |
| 291 |
rockchip,pins = <2 RK_PA5 1 &pcfg_pull_up_drv_8ma>, |
| 292 |
<2 RK_PA6 1 &pcfg_pull_up_drv_8ma>, |
| 293 |
<2 RK_PA7 1 &pcfg_pull_up_drv_8ma>, |
| 294 |
<2 RK_PB0 1 &pcfg_pull_up_drv_8ma>; |
| 295 |
}; |
| 296 |
}; |
| 297 |
|
| 298 |
usb { |
| 299 |
host_vbus_drv: host-vbus-drv { |
| 300 |
rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>; |
| 301 |
}; |
| 302 |
}; |
| 303 |
}; |
| 304 |
|
| 305 |
&saradc { |
| 306 |
vref-supply = <&vcc_18>; |
| 307 |
status = "okay"; |
| 308 |
}; |
| 309 |
|
| 310 |
&sdmmc { |
| 311 |
bus-width = <4>; |
| 312 |
clock-frequency = <50000000>; |
| 313 |
max-frequency = <50000000>; |
| 314 |
cap-sd-highspeed; |
| 315 |
card-detect-delay = <200>; |
| 316 |
pinctrl-names = "default"; |
| 317 |
pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>; |
| 318 |
vmmc-supply = <&vcc_sd>; |
| 319 |
vqmmc-supply = <&vccio_sd>; |
| 320 |
status = "okay"; |
| 321 |
}; |
| 322 |
|
| 323 |
&uart2 { |
| 324 |
status = "okay"; |
| 325 |
}; |
| 326 |
|
| 327 |
&uart4 { |
| 328 |
pinctrl-names = "default"; |
| 329 |
pinctrl-0 = <&uart4_xfer>; |
| 330 |
status = "okay"; |
| 331 |
}; |
| 332 |
|
| 333 |
&usb_host0_ehci { |
| 334 |
status = "okay"; |
| 335 |
}; |
| 336 |
|
| 337 |
&usb_otg { |
| 338 |
status = "okay"; |
| 339 |
}; |
| 340 |
|
| 341 |
&wdt { |
| 342 |
status = "okay"; |
| 343 |
}; |