Debian Codegraph @

scripts/dtc/include-prefixes/arm64/rockchip/rk3368-lion-haikou.dts

raw
1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
2 /*
3 * Copyright (c) 2018 Theobroma Systems Design und Consulting GmbH
4 */
5
6 /dts-v1/;
7 #include "rk3368-lion.dtsi"
8
9 / {
10 model = "Theobroma Systems RK3368-uQ7 Baseboard";
11 compatible = "tsd,rk3368-lion-haikou", "rockchip,rk3368";
12
13 aliases {
14 mmc1 = &sdmmc;
15 };
16
17 chosen {
18 stdout-path = "serial0:115200n8";
19 };
20
21 leds {
22 pinctrl-0 = <&module_led_pins>, <&sd_card_led_pin>;
23
24 sd_card_led: led-3 {
25 label = "sd_card_led";
26 gpios = <&gpio0 RK_PD2 GPIO_ACTIVE_HIGH>;
27 linux,default-trigger = "mmc0";
28 };
29 };
30
31 dc_12v: regulator-dc-12v {
32 compatible = "regulator-fixed";
33 regulator-name = "dc_12v";
34 regulator-always-on;
35 regulator-boot-on;
36 regulator-min-microvolt = <12000000>;
37 regulator-max-microvolt = <12000000>;
38 };
39
40 vcc3v3_baseboard: regulator-vcc3v3-baseboard {
41 compatible = "regulator-fixed";
42 regulator-name = "vcc3v3_baseboard";
43 regulator-always-on;
44 regulator-boot-on;
45 regulator-min-microvolt = <3300000>;
46 regulator-max-microvolt = <3300000>;
47 vin-supply = <&dc_12v>;
48 };
49
50 vcc5v0_otg: regulator-vcc5v0-otg {
51 compatible = "regulator-fixed";
52 enable-active-high;
53 gpio = <&gpio0 RK_PD4 GPIO_ACTIVE_HIGH>;
54 pinctrl-names = "default";
55 pinctrl-0 = <&otg_vbus_drv>;
56 regulator-name = "vcc5v0_otg";
57 regulator-always-on;
58 };
59 };
60
61 &display_subsystem {
62 status = "okay";
63 };
64
65 &hdmi {
66 status = "okay";
67 };
68
69 &i2c_lvds_blc {
70 eeprom: eeprom@50 {
71 compatible = "atmel,24c01";
72 pagesize = <8>;
73 reg = <0x50>;
74 };
75 };
76
77 &pwm1 {
78 status = "okay";
79 };
80
81 &sdmmc {
82 bus-width = <4>;
83 cap-mmc-highspeed;
84 cap-sd-highspeed;
85 cd-gpios = <&gpio2 RK_PB3 GPIO_ACTIVE_LOW>;
86 disable-wp;
87 max-frequency = <25000000>;
88 pinctrl-names = "default";
89 pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_bus4>;
90 rockchip,default-sample-phase = <90>;
91 vmmc-supply = <&vcc3v3_baseboard>;
92 status = "okay";
93 };
94
95 &spi2 {
96 cs-gpios = <0>, <&gpio2 RK_PC3 GPIO_ACTIVE_LOW>;
97 status = "okay";
98 };
99
100 &usb_otg {
101 dr_mode = "otg";
102 status = "okay";
103 };
104
105 &uart0 {
106 pinctrl-names = "default";
107 pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>;
108 status = "okay";
109 };
110
111 &uart1 {
112 /* alternate function of GPIO5/6 */
113 status = "disabled";
114 };
115
116 &vop {
117 status = "okay";
118 };
119
120 &vop_mmu {
121 status = "okay";
122 };
123
124 &pinctrl {
125 pinctrl-names = "default";
126 pinctrl-0 = <&haikou_pin_hog>;
127
128 hog {
129 haikou_pin_hog: haikou-pin-hog {
130 rockchip,pins =
131 /* LID_BTN */
132 <3 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>,
133 /* BATLOW# */
134 <0 RK_PD6 RK_FUNC_GPIO &pcfg_pull_up>,
135 /* SLP_BTN# */
136 <3 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>,
137 /* BIOS_DISABLE# */
138 <3 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up>;
139 };
140 };
141
142 leds {
143 sd_card_led_pin: sd-card-led-pin {
144 rockchip,pins =
145 <0 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
146 };
147 };
148
149 sdmmc {
150 sdmmc_cd_pin: sdmmc-cd-pin {
151 rockchip,pins =
152 <2 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
153 };
154 };
155
156 usb_otg {
157 otg_vbus_drv: otg-vbus-drv {
158 rockchip,pins =
159 <0 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>;
160 };
161 };
162 };