| 1 |
// SPDX-License-Identifier: (GPL-2.0+ OR MIT) |
| 2 |
|
| 3 |
/dts-v1/; |
| 4 |
|
| 5 |
#include <dt-bindings/clock/rockchip,rk808.h> |
| 6 |
#include <dt-bindings/input/input.h> |
| 7 |
#include <dt-bindings/leds/common.h> |
| 8 |
#include <dt-bindings/sound/rt5640.h> |
| 9 |
#include "rk3368.dtsi" |
| 10 |
|
| 11 |
/ { |
| 12 |
model = "Neardi LBA3368"; |
| 13 |
compatible = "neardi,lba3368", "rockchip,rk3368"; |
| 14 |
|
| 15 |
aliases { |
| 16 |
ethernet0 = &gmac; |
| 17 |
mmc0 = &emmc; |
| 18 |
mmc1 = &sdmmc; |
| 19 |
mmc2 = &sdio0; |
| 20 |
rtc0 = &hym8563; |
| 21 |
rtc1 = &rk808; |
| 22 |
}; |
| 23 |
|
| 24 |
chosen { |
| 25 |
stdout-path = "serial1:115200n8"; |
| 26 |
}; |
| 27 |
|
| 28 |
memory@0 { |
| 29 |
device_type = "memory"; |
| 30 |
reg = <0x0 0x0 0x0 0x40000000>; |
| 31 |
}; |
| 32 |
|
| 33 |
adc-key { |
| 34 |
compatible = "adc-keys"; |
| 35 |
io-channels = <&saradc 1>; |
| 36 |
io-channel-names = "buttons"; |
| 37 |
poll-interval = <100>; |
| 38 |
keyup-threshold-microvolt = <1800000>; |
| 39 |
|
| 40 |
button-recovery { |
| 41 |
label = "Recovery"; |
| 42 |
linux,code = <KEY_VENDOR>; |
| 43 |
press-threshold-microvolt = <0>; |
| 44 |
}; |
| 45 |
}; |
| 46 |
|
| 47 |
analog-sound { |
| 48 |
compatible = "audio-graph-card"; |
| 49 |
dais = <&i2s_8ch_p0>; |
| 50 |
hp-det-gpios = <&gpio0 RK_PC7 GPIO_ACTIVE_HIGH>; |
| 51 |
label = "alc5640"; |
| 52 |
routing = "Mic Jack", "MICBIAS1", |
| 53 |
"IN1P", "Mic Jack", |
| 54 |
"Headphone Jack", "HPOL", |
| 55 |
"Headphone Jack", "HPOR", |
| 56 |
"Speakers", "SPORP", |
| 57 |
"Speakers", "SPORN", |
| 58 |
"Speakers", "SPOLP", |
| 59 |
"Speakers", "SPOLN"; |
| 60 |
widgets = "Microphone", "Mic Jack", |
| 61 |
"Headphone", "Headphone Jack", |
| 62 |
"Speaker", "Speakers"; |
| 63 |
pinctrl-names = "default"; |
| 64 |
pinctrl-0 = <&hp_det>; |
| 65 |
}; |
| 66 |
|
| 67 |
dc_12v: regulator-dc-12v { |
| 68 |
compatible = "regulator-fixed"; |
| 69 |
regulator-name = "dc_12v"; |
| 70 |
regulator-min-microvolt = <12000000>; |
| 71 |
regulator-max-microvolt = <12000000>; |
| 72 |
regulator-always-on; |
| 73 |
regulator-boot-on; |
| 74 |
}; |
| 75 |
|
| 76 |
ext_gmac: gmac-clk { |
| 77 |
compatible = "fixed-clock"; |
| 78 |
clock-frequency = <50000000>; |
| 79 |
clock-output-names = "ext_gmac"; |
| 80 |
#clock-cells = <0>; |
| 81 |
}; |
| 82 |
|
| 83 |
hub_avdd: regulator-hub-avdd { |
| 84 |
compatible = "regulator-fixed"; |
| 85 |
regulator-name = "hub_avdd"; |
| 86 |
regulator-min-microvolt = <3300000>; |
| 87 |
regulator-max-microvolt = <3300000>; |
| 88 |
vin-supply = <&vcc_io>; |
| 89 |
regulator-always-on; |
| 90 |
}; |
| 91 |
|
| 92 |
leds { |
| 93 |
compatible = "gpio-leds"; |
| 94 |
|
| 95 |
power-led { |
| 96 |
gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_HIGH>; |
| 97 |
function = LED_FUNCTION_POWER; |
| 98 |
color = <LED_COLOR_ID_GREEN>; |
| 99 |
default-state = "on"; |
| 100 |
pinctrl-names = "default"; |
| 101 |
pinctrl-0 = <&power_led>; |
| 102 |
}; |
| 103 |
}; |
| 104 |
|
| 105 |
sdio_pwrseq: sdio-pwrseq { |
| 106 |
compatible = "mmc-pwrseq-simple"; |
| 107 |
clocks = <&rk808 RK808_CLKOUT1>; |
| 108 |
clock-names = "ext_clock"; |
| 109 |
reset-gpios = <&gpio3 RK_PA5 GPIO_ACTIVE_LOW>; |
| 110 |
pinctrl-names = "default"; |
| 111 |
pinctrl-0 = <&wifi_reg_on>; |
| 112 |
}; |
| 113 |
|
| 114 |
vcc_host: regulator-vcc-host { |
| 115 |
compatible = "regulator-fixed"; |
| 116 |
gpio = <&gpio3 RK_PC1 GPIO_ACTIVE_HIGH>; |
| 117 |
regulator-name = "vcc_host"; |
| 118 |
regulator-min-microvolt = <5000000>; |
| 119 |
regulator-max-microvolt = <5000000>; |
| 120 |
vin-supply = <&vcc_sys>; |
| 121 |
pinctrl-names = "default"; |
| 122 |
pinctrl-0 = <&host_vbus_drv>; |
| 123 |
enable-active-high; |
| 124 |
regulator-always-on; |
| 125 |
}; |
| 126 |
|
| 127 |
vcc_lan: regulator-vcc-lan { |
| 128 |
compatible = "regulator-fixed"; |
| 129 |
regulator-name = "vcc_lan"; |
| 130 |
regulator-min-microvolt = <3300000>; |
| 131 |
regulator-max-microvolt = <3300000>; |
| 132 |
vin-supply = <&vcc_io>; |
| 133 |
regulator-always-on; |
| 134 |
}; |
| 135 |
|
| 136 |
vcc_otg: regulator-vcc-otg { |
| 137 |
compatible = "regulator-fixed"; |
| 138 |
gpio = <&gpio0 RK_PC1 GPIO_ACTIVE_HIGH>; |
| 139 |
regulator-name = "vcc_otg"; |
| 140 |
regulator-min-microvolt = <5000000>; |
| 141 |
regulator-max-microvolt = <5000000>; |
| 142 |
vin-supply = <&vcc_sys>; |
| 143 |
pinctrl-names = "default"; |
| 144 |
pinctrl-0 = <&otg_vbus_drv>; |
| 145 |
enable-active-high; |
| 146 |
regulator-always-on; |
| 147 |
}; |
| 148 |
|
| 149 |
vcc_sys: regulator-vcc-sys { |
| 150 |
compatible = "regulator-fixed"; |
| 151 |
regulator-name = "vcc_sys"; |
| 152 |
regulator-min-microvolt = <5000000>; |
| 153 |
regulator-max-microvolt = <5000000>; |
| 154 |
vin-supply = <&dc_12v>; |
| 155 |
regulator-always-on; |
| 156 |
regulator-boot-on; |
| 157 |
}; |
| 158 |
|
| 159 |
vdd10_usb: regulator-vdd10-usb { |
| 160 |
compatible = "regulator-fixed"; |
| 161 |
regulator-name = "vdd10_usb"; |
| 162 |
regulator-min-microvolt = <1000000>; |
| 163 |
regulator-max-microvolt = <1000000>; |
| 164 |
vin-supply = <&vdd_10>; |
| 165 |
regulator-always-on; |
| 166 |
}; |
| 167 |
}; |
| 168 |
|
| 169 |
&cpu_l0 { |
| 170 |
cpu-supply = <&vdd_cpu>; |
| 171 |
}; |
| 172 |
|
| 173 |
&cpu_l1 { |
| 174 |
cpu-supply = <&vdd_cpu>; |
| 175 |
}; |
| 176 |
|
| 177 |
&cpu_l2 { |
| 178 |
cpu-supply = <&vdd_cpu>; |
| 179 |
}; |
| 180 |
|
| 181 |
&cpu_l3 { |
| 182 |
cpu-supply = <&vdd_cpu>; |
| 183 |
}; |
| 184 |
|
| 185 |
&cpu_b0 { |
| 186 |
cpu-supply = <&vdd_cpu>; |
| 187 |
}; |
| 188 |
|
| 189 |
&cpu_b1 { |
| 190 |
cpu-supply = <&vdd_cpu>; |
| 191 |
}; |
| 192 |
|
| 193 |
&cpu_b2 { |
| 194 |
cpu-supply = <&vdd_cpu>; |
| 195 |
}; |
| 196 |
|
| 197 |
&cpu_b3 { |
| 198 |
cpu-supply = <&vdd_cpu>; |
| 199 |
}; |
| 200 |
|
| 201 |
&emmc { |
| 202 |
bus-width = <8>; |
| 203 |
vmmc-supply = <&vcc_io>; |
| 204 |
vqmmc-supply = <&vcc_18>; |
| 205 |
pinctrl-names = "default"; |
| 206 |
pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus8>; |
| 207 |
cap-mmc-highspeed; |
| 208 |
non-removable; |
| 209 |
no-sd; |
| 210 |
no-sdio; |
| 211 |
mmc-hs200-1_8v; |
| 212 |
status = "okay"; |
| 213 |
}; |
| 214 |
|
| 215 |
&gmac { |
| 216 |
clock_in_out = "input"; |
| 217 |
phy-handle = <&phy>; |
| 218 |
phy-mode = "rmii"; |
| 219 |
phy-supply = <&vcc_lan>; |
| 220 |
assigned-clocks = <&cru SCLK_MAC>; |
| 221 |
assigned-clock-parents = <&ext_gmac>; |
| 222 |
pinctrl-names = "default"; |
| 223 |
pinctrl-0 = <&rmii_pins>; |
| 224 |
status = "okay"; |
| 225 |
|
| 226 |
mdio { |
| 227 |
compatible = "snps,dwmac-mdio"; |
| 228 |
#address-cells = <1>; |
| 229 |
#size-cells = <0>; |
| 230 |
|
| 231 |
phy: ethernet-phy@1 { |
| 232 |
compatible = "ethernet-phy-ieee802.3-c22"; |
| 233 |
reg = <1>; |
| 234 |
max-speed = <100>; |
| 235 |
reset-assert-us = <10000>; |
| 236 |
reset-deassert-us = <1000000>; |
| 237 |
reset-gpios = <&gpio3 RK_PB4 GPIO_ACTIVE_LOW>; |
| 238 |
pinctrl-names = "default"; |
| 239 |
pinctrl-0 = <&phy_rst>; |
| 240 |
}; |
| 241 |
}; |
| 242 |
}; |
| 243 |
|
| 244 |
&io_domains { |
| 245 |
audio-supply = <&vcca1v8_codec>; |
| 246 |
dvp-supply = <&vcc_18>; |
| 247 |
flash0-supply = <&vcc_18>; |
| 248 |
gpio1830-supply = <&vcc_io>; |
| 249 |
gpio30-supply = <&vcc_io>; |
| 250 |
sdcard-supply = <&vccio_sd>; |
| 251 |
wifi-supply = <&vdd1v8_wl>; |
| 252 |
status = "okay"; |
| 253 |
}; |
| 254 |
|
| 255 |
&i2c0 { |
| 256 |
status = "okay"; |
| 257 |
|
| 258 |
rk808: pmic@1b { |
| 259 |
compatible = "rockchip,rk808"; |
| 260 |
reg = <0x1b>; |
| 261 |
interrupts-extended = <&gpio0 RK_PA5 IRQ_TYPE_LEVEL_LOW>; |
| 262 |
clock-output-names = "rk808-clkout1", "xin32k_wifi_bt"; |
| 263 |
vcc1-supply = <&vcc_sys>; |
| 264 |
vcc2-supply = <&vcc_sys>; |
| 265 |
vcc3-supply = <&vcc_sys>; |
| 266 |
vcc4-supply = <&vcc_sys>; |
| 267 |
vcc6-supply = <&vcc_sys>; |
| 268 |
vcc7-supply = <&vcc_sys>; |
| 269 |
vcc8-supply = <&vcc_io>; |
| 270 |
vcc9-supply = <&vcc_sys>; |
| 271 |
vcc10-supply = <&vcc_sys>; |
| 272 |
vcc11-supply = <&vcc_sys>; |
| 273 |
vcc12-supply = <&vcc_io>; |
| 274 |
pinctrl-names = "default"; |
| 275 |
pinctrl-0 = <&pmic_int &pmic_sleep>; |
| 276 |
system-power-controller; |
| 277 |
wakeup-source; |
| 278 |
#clock-cells = <1>; |
| 279 |
|
| 280 |
regulators { |
| 281 |
vdd_cpu: DCDC_REG1 { |
| 282 |
regulator-name = "vdd_cpu"; |
| 283 |
regulator-min-microvolt = <700000>; |
| 284 |
regulator-max-microvolt = <1350000>; |
| 285 |
regulator-always-on; |
| 286 |
regulator-boot-on; |
| 287 |
|
| 288 |
regulator-state-mem { |
| 289 |
regulator-off-in-suspend; |
| 290 |
}; |
| 291 |
}; |
| 292 |
|
| 293 |
vdd_log: DCDC_REG2 { |
| 294 |
regulator-name = "vdd_log"; |
| 295 |
regulator-min-microvolt = <1100000>; |
| 296 |
regulator-max-microvolt = <1500000>; |
| 297 |
regulator-ramp-delay = <6001>; |
| 298 |
regulator-always-on; |
| 299 |
regulator-boot-on; |
| 300 |
|
| 301 |
regulator-state-mem { |
| 302 |
regulator-suspend-microvolt = <1000000>; |
| 303 |
regulator-on-in-suspend; |
| 304 |
}; |
| 305 |
}; |
| 306 |
|
| 307 |
vcc_ddr: DCDC_REG3 { |
| 308 |
regulator-name = "vcc_ddr"; |
| 309 |
regulator-always-on; |
| 310 |
regulator-boot-on; |
| 311 |
|
| 312 |
regulator-state-mem { |
| 313 |
regulator-on-in-suspend; |
| 314 |
}; |
| 315 |
}; |
| 316 |
|
| 317 |
vcc_io: DCDC_REG4 { |
| 318 |
regulator-name = "vcc_io"; |
| 319 |
regulator-min-microvolt = <3300000>; |
| 320 |
regulator-max-microvolt = <3300000>; |
| 321 |
regulator-always-on; |
| 322 |
regulator-boot-on; |
| 323 |
|
| 324 |
regulator-state-mem { |
| 325 |
regulator-suspend-microvolt = <3300000>; |
| 326 |
regulator-on-in-suspend; |
| 327 |
}; |
| 328 |
}; |
| 329 |
|
| 330 |
vcca1v8_codec: LDO_REG1 { |
| 331 |
regulator-name = "vcca1v8_codec"; |
| 332 |
regulator-min-microvolt = <1800000>; |
| 333 |
regulator-max-microvolt = <1800000>; |
| 334 |
regulator-always-on; |
| 335 |
|
| 336 |
regulator-state-mem { |
| 337 |
regulator-off-in-suspend; |
| 338 |
}; |
| 339 |
}; |
| 340 |
|
| 341 |
vcca3v0_codec: LDO_REG2 { |
| 342 |
regulator-name = "vcca3v0_codec"; |
| 343 |
regulator-min-microvolt = <3000000>; |
| 344 |
regulator-max-microvolt = <3000000>; |
| 345 |
regulator-always-on; |
| 346 |
|
| 347 |
regulator-state-mem { |
| 348 |
regulator-off-in-suspend; |
| 349 |
}; |
| 350 |
}; |
| 351 |
|
| 352 |
vdd_10: LDO_REG3 { |
| 353 |
regulator-name = "vdd_10"; |
| 354 |
regulator-min-microvolt = <1000000>; |
| 355 |
regulator-max-microvolt = <1000000>; |
| 356 |
regulator-always-on; |
| 357 |
regulator-boot-on; |
| 358 |
|
| 359 |
regulator-state-mem { |
| 360 |
regulator-suspend-microvolt = <1000000>; |
| 361 |
regulator-on-in-suspend; |
| 362 |
}; |
| 363 |
}; |
| 364 |
|
| 365 |
vdd1v8_wl: LDO_REG4 { |
| 366 |
regulator-name = "vdd1v8_wl"; |
| 367 |
regulator-min-microvolt = <1800000>; |
| 368 |
regulator-max-microvolt = <1800000>; |
| 369 |
|
| 370 |
regulator-state-mem { |
| 371 |
regulator-off-in-suspend; |
| 372 |
}; |
| 373 |
}; |
| 374 |
|
| 375 |
vccio_sd: LDO_REG5 { |
| 376 |
regulator-name = "vccio_sd"; |
| 377 |
regulator-min-microvolt = <1800000>; |
| 378 |
regulator-max-microvolt = <3300000>; |
| 379 |
|
| 380 |
regulator-state-mem { |
| 381 |
regulator-off-in-suspend; |
| 382 |
}; |
| 383 |
}; |
| 384 |
|
| 385 |
vdd10_lcd: LDO_REG6 { |
| 386 |
regulator-name = "vdd10_lcd"; |
| 387 |
regulator-min-microvolt = <1000000>; |
| 388 |
regulator-max-microvolt = <1000000>; |
| 389 |
|
| 390 |
regulator-state-mem { |
| 391 |
regulator-off-in-suspend; |
| 392 |
}; |
| 393 |
}; |
| 394 |
|
| 395 |
vcc_18: LDO_REG7 { |
| 396 |
regulator-name = "vcc_18"; |
| 397 |
regulator-min-microvolt = <1800000>; |
| 398 |
regulator-max-microvolt = <1800000>; |
| 399 |
|
| 400 |
regulator-state-mem { |
| 401 |
regulator-suspend-microvolt = <1800000>; |
| 402 |
regulator-on-in-suspend; |
| 403 |
}; |
| 404 |
}; |
| 405 |
|
| 406 |
vcc18_lcd: LDO_REG8 { |
| 407 |
regulator-name = "vcc18_lcd"; |
| 408 |
regulator-min-microvolt = <1800000>; |
| 409 |
regulator-max-microvolt = <1800000>; |
| 410 |
|
| 411 |
regulator-state-mem { |
| 412 |
regulator-off-in-suspend; |
| 413 |
}; |
| 414 |
}; |
| 415 |
|
| 416 |
vcc_tp: SWITCH_REG1 { |
| 417 |
regulator-name = "vcc_tp"; |
| 418 |
|
| 419 |
regulator-state-mem { |
| 420 |
regulator-on-in-suspend; |
| 421 |
}; |
| 422 |
}; |
| 423 |
|
| 424 |
vcc_sd: SWITCH_REG2 { |
| 425 |
regulator-name = "vcc_sd"; |
| 426 |
|
| 427 |
regulator-state-mem { |
| 428 |
regulator-off-in-suspend; |
| 429 |
}; |
| 430 |
}; |
| 431 |
}; |
| 432 |
}; |
| 433 |
}; |
| 434 |
|
| 435 |
&i2c1 { |
| 436 |
status = "okay"; |
| 437 |
|
| 438 |
codec@1c { |
| 439 |
compatible = "realtek,rt5640"; |
| 440 |
reg = <0x1c>; |
| 441 |
clocks = <&cru SCLK_I2S_8CH_OUT>; |
| 442 |
clock-names = "mclk"; |
| 443 |
realtek,dmic1-data-pin = <RT5640_DMIC1_DATA_PIN_IN1P>; |
| 444 |
realtek,dmic2-data-pin = <RT5640_DMIC2_DATA_PIN_IN1N>; |
| 445 |
realtek,in1-differential; |
| 446 |
#sound-dai-cells = <0>; |
| 447 |
|
| 448 |
port { |
| 449 |
rt5640_p0_0: endpoint { |
| 450 |
remote-endpoint = <&i2s_8ch_p0_0>; |
| 451 |
}; |
| 452 |
}; |
| 453 |
}; |
| 454 |
|
| 455 |
hym8563: rtc@51 { |
| 456 |
compatible = "haoyu,hym8563"; |
| 457 |
reg = <0x51>; |
| 458 |
clock-output-names = "xin32k"; |
| 459 |
#clock-cells = <0>; |
| 460 |
}; |
| 461 |
}; |
| 462 |
|
| 463 |
&i2s_8ch { |
| 464 |
status = "okay"; |
| 465 |
|
| 466 |
i2s_8ch_p0: port { |
| 467 |
i2s_8ch_p0_0: endpoint { |
| 468 |
dai-format = "i2s"; |
| 469 |
mclk-fs = <256>; |
| 470 |
remote-endpoint = <&rt5640_p0_0>; |
| 471 |
}; |
| 472 |
}; |
| 473 |
}; |
| 474 |
|
| 475 |
&pinctrl { |
| 476 |
bluetooth { |
| 477 |
bt_host_wake: bt-host-wake { |
| 478 |
rockchip,pins = <3 RK_PA7 RK_FUNC_GPIO &pcfg_pull_none>; |
| 479 |
}; |
| 480 |
|
| 481 |
bt_reg_on: bt-reg-on { |
| 482 |
rockchip,pins = <3 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>; |
| 483 |
}; |
| 484 |
|
| 485 |
bt_wake: bt-wake { |
| 486 |
rockchip,pins = <3 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>; |
| 487 |
}; |
| 488 |
}; |
| 489 |
|
| 490 |
leds { |
| 491 |
power_led: power-led { |
| 492 |
rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>; |
| 493 |
}; |
| 494 |
}; |
| 495 |
|
| 496 |
phy { |
| 497 |
phy_rst: phy-rst { |
| 498 |
rockchip,pins = <3 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>; |
| 499 |
}; |
| 500 |
}; |
| 501 |
|
| 502 |
pmic { |
| 503 |
pmic_int: pmic-int { |
| 504 |
rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>; |
| 505 |
}; |
| 506 |
|
| 507 |
pmic_sleep: pmic-sleep { |
| 508 |
rockchip,pins = <0 RK_PA0 2 &pcfg_pull_none>; |
| 509 |
}; |
| 510 |
}; |
| 511 |
|
| 512 |
sdio-pwrseq { |
| 513 |
wifi_reg_on: wifi-reg-on { |
| 514 |
rockchip,pins = <3 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>; |
| 515 |
}; |
| 516 |
}; |
| 517 |
|
| 518 |
sound { |
| 519 |
hp_det: hp-det { |
| 520 |
rockchip,pins = <0 RK_PC7 RK_FUNC_GPIO &pcfg_pull_none>; |
| 521 |
}; |
| 522 |
}; |
| 523 |
|
| 524 |
usb { |
| 525 |
host_vbus_drv: host-vbus-drv { |
| 526 |
rockchip,pins = <3 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>; |
| 527 |
}; |
| 528 |
|
| 529 |
otg_vbus_drv: otg-vbus-drv { |
| 530 |
rockchip,pins = <0 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>; |
| 531 |
}; |
| 532 |
}; |
| 533 |
|
| 534 |
wifi { |
| 535 |
wifi_host_wake: wifi-host-wake { |
| 536 |
rockchip,pins = <3 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>; |
| 537 |
}; |
| 538 |
}; |
| 539 |
}; |
| 540 |
|
| 541 |
&pmu_io_domains { |
| 542 |
pmu-supply = <&vcc_io>; |
| 543 |
vop-supply = <&vcc_io>; |
| 544 |
status = "okay"; |
| 545 |
}; |
| 546 |
|
| 547 |
&saradc { |
| 548 |
vref-supply = <&vcc_18>; |
| 549 |
status = "okay"; |
| 550 |
}; |
| 551 |
|
| 552 |
&sdio0 { |
| 553 |
bus-width = <4>; |
| 554 |
mmc-pwrseq = <&sdio_pwrseq>; |
| 555 |
vmmc-supply = <&vcc_io>; |
| 556 |
vqmmc-supply = <&vdd1v8_wl>; |
| 557 |
assigned-clocks = <&cru SCLK_SDIO0>; |
| 558 |
assigned-clock-parents = <&cru PLL_CPLL>; |
| 559 |
pinctrl-names = "default"; |
| 560 |
pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk>; |
| 561 |
cap-sd-highspeed; |
| 562 |
cap-sdio-irq; |
| 563 |
no-sd; |
| 564 |
no-mmc; |
| 565 |
non-removable; |
| 566 |
sd-uhs-sdr104; |
| 567 |
#address-cells = <1>; |
| 568 |
#size-cells = <0>; |
| 569 |
status = "okay"; |
| 570 |
|
| 571 |
wifi@1 { |
| 572 |
compatible = "brcm,bcm43455-fmac", "brcm,bcm4329-fmac"; |
| 573 |
reg = <1>; |
| 574 |
interrupts-extended = <&gpio3 RK_PA6 IRQ_TYPE_LEVEL_HIGH>; |
| 575 |
interrupt-names = "host-wake"; |
| 576 |
pinctrl-names = "default"; |
| 577 |
pinctrl-0 = <&wifi_host_wake>; |
| 578 |
}; |
| 579 |
}; |
| 580 |
|
| 581 |
&sdmmc { |
| 582 |
bus-width = <4>; |
| 583 |
vmmc-supply = <&vcc_sd>; |
| 584 |
vqmmc-supply = <&vccio_sd>; |
| 585 |
pinctrl-names = "default"; |
| 586 |
pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_bus4 &sdmmc_cd>; |
| 587 |
cap-sd-highspeed; |
| 588 |
disable-wp; |
| 589 |
no-mmc; |
| 590 |
no-sdio; |
| 591 |
sd-uhs-sdr12; |
| 592 |
sd-uhs-sdr25; |
| 593 |
sd-uhs-sdr50; |
| 594 |
sd-uhs-sdr104; |
| 595 |
status = "okay"; |
| 596 |
}; |
| 597 |
|
| 598 |
&tsadc { |
| 599 |
rockchip,hw-tshut-mode = <0>; |
| 600 |
rockchip,hw-tshut-polarity = <1>; |
| 601 |
status = "okay"; |
| 602 |
}; |
| 603 |
|
| 604 |
&uart0 { |
| 605 |
pinctrl-names = "default"; |
| 606 |
pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>; |
| 607 |
uart-has-rtscts; |
| 608 |
status = "okay"; |
| 609 |
|
| 610 |
bluetooth { |
| 611 |
compatible = "brcm,bcm4345c5"; |
| 612 |
interrupts-extended = <&gpio3 RK_PA7 IRQ_TYPE_LEVEL_HIGH>; |
| 613 |
interrupt-names = "host-wakeup"; |
| 614 |
clocks = <&rk808 RK808_CLKOUT1>; |
| 615 |
clock-names = "lpo"; |
| 616 |
device-wakeup-gpios = <&gpio3 RK_PA3 GPIO_ACTIVE_HIGH>; |
| 617 |
shutdown-gpios = <&gpio3 RK_PA2 GPIO_ACTIVE_HIGH>; |
| 618 |
max-speed = <15000000>; |
| 619 |
vbat-supply = <&vcc_io>; |
| 620 |
vddio-supply = <&vdd1v8_wl>; |
| 621 |
pinctrl-names = "default"; |
| 622 |
pinctrl-0 = <&bt_host_wake &bt_wake &bt_reg_on>; |
| 623 |
}; |
| 624 |
}; |
| 625 |
|
| 626 |
&uart1 { |
| 627 |
pinctrl-names = "default"; |
| 628 |
pinctrl-0 = <&uart1_xfer>; |
| 629 |
status = "okay"; |
| 630 |
}; |
| 631 |
|
| 632 |
&uart4 { |
| 633 |
pinctrl-names = "default"; |
| 634 |
pinctrl-0 = <&uart4_xfer>; |
| 635 |
status = "okay"; |
| 636 |
}; |
| 637 |
|
| 638 |
&usb_host0_ehci { |
| 639 |
#address-cells = <1>; |
| 640 |
#size-cells = <0>; |
| 641 |
status = "okay"; |
| 642 |
|
| 643 |
hub@1 { |
| 644 |
compatible = "usb5e3,610"; |
| 645 |
reg = <1>; |
| 646 |
vdd-supply = <&hub_avdd>; |
| 647 |
}; |
| 648 |
}; |
| 649 |
|
| 650 |
&usb_otg { |
| 651 |
vbus-supply = <&vcc_otg>; |
| 652 |
vusb_a-supply = <&vcc_io>; |
| 653 |
vusb_d-supply = <&vdd10_usb>; |
| 654 |
status = "okay"; |
| 655 |
}; |
| 656 |
|
| 657 |
&wdt { |
| 658 |
status = "okay"; |
| 659 |
}; |