| 1 |
// SPDX-License-Identifier: (GPL-2.0+ OR MIT) |
| 2 |
/* |
| 3 |
* Copyright (c) 2016 Andreas Färber |
| 4 |
*/ |
| 5 |
|
| 6 |
/dts-v1/; |
| 7 |
#include "rk3368.dtsi" |
| 8 |
#include <dt-bindings/input/input.h> |
| 9 |
|
| 10 |
/ { |
| 11 |
model = "GeekBox"; |
| 12 |
compatible = "geekbuying,geekbox", "rockchip,rk3368"; |
| 13 |
|
| 14 |
aliases { |
| 15 |
ethernet0 = &gmac; |
| 16 |
mmc0 = &emmc; |
| 17 |
}; |
| 18 |
|
| 19 |
chosen { |
| 20 |
stdout-path = "serial2:115200n8"; |
| 21 |
}; |
| 22 |
|
| 23 |
memory@0 { |
| 24 |
device_type = "memory"; |
| 25 |
reg = <0x0 0x0 0x0 0x80000000>; |
| 26 |
}; |
| 27 |
|
| 28 |
ext_gmac: gmac-clk { |
| 29 |
compatible = "fixed-clock"; |
| 30 |
clock-frequency = <125000000>; |
| 31 |
clock-output-names = "ext_gmac"; |
| 32 |
#clock-cells = <0>; |
| 33 |
}; |
| 34 |
|
| 35 |
ir: ir-receiver { |
| 36 |
compatible = "gpio-ir-receiver"; |
| 37 |
gpios = <&gpio3 RK_PD6 GPIO_ACTIVE_LOW>; |
| 38 |
pinctrl-names = "default"; |
| 39 |
pinctrl-0 = <&ir_int>; |
| 40 |
}; |
| 41 |
|
| 42 |
keys: gpio-keys { |
| 43 |
compatible = "gpio-keys"; |
| 44 |
pinctrl-names = "default"; |
| 45 |
pinctrl-0 = <&pwr_key>; |
| 46 |
|
| 47 |
key-power { |
| 48 |
gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_LOW>; |
| 49 |
label = "GPIO Power"; |
| 50 |
linux,code = <KEY_POWER>; |
| 51 |
wakeup-source; |
| 52 |
}; |
| 53 |
}; |
| 54 |
|
| 55 |
leds: gpio-leds { |
| 56 |
compatible = "gpio-leds"; |
| 57 |
|
| 58 |
blue_led: led-0 { |
| 59 |
gpios = <&gpio2 RK_PA2 GPIO_ACTIVE_HIGH>; |
| 60 |
label = "geekbox:blue:led"; |
| 61 |
default-state = "on"; |
| 62 |
}; |
| 63 |
|
| 64 |
red_led: led-1 { |
| 65 |
gpios = <&gpio2 RK_PA3 GPIO_ACTIVE_HIGH>; |
| 66 |
label = "geekbox:red:led"; |
| 67 |
default-state = "off"; |
| 68 |
}; |
| 69 |
}; |
| 70 |
|
| 71 |
vcc_sys: regulator-vcc-sys { |
| 72 |
compatible = "regulator-fixed"; |
| 73 |
regulator-name = "vcc_sys"; |
| 74 |
regulator-min-microvolt = <5000000>; |
| 75 |
regulator-max-microvolt = <5000000>; |
| 76 |
regulator-always-on; |
| 77 |
regulator-boot-on; |
| 78 |
}; |
| 79 |
}; |
| 80 |
|
| 81 |
&emmc { |
| 82 |
status = "okay"; |
| 83 |
bus-width = <8>; |
| 84 |
cap-mmc-highspeed; |
| 85 |
clock-frequency = <150000000>; |
| 86 |
non-removable; |
| 87 |
vmmc-supply = <&vcc_io>; |
| 88 |
vqmmc-supply = <&vcc18_flash>; |
| 89 |
pinctrl-names = "default"; |
| 90 |
pinctrl-0 = <&emmc_clk>, <&emmc_cmd>, <&emmc_bus8>; |
| 91 |
}; |
| 92 |
|
| 93 |
&gmac { |
| 94 |
status = "okay"; |
| 95 |
phy-supply = <&vcc_lan>; |
| 96 |
phy-mode = "rgmii"; |
| 97 |
clock_in_out = "input"; |
| 98 |
assigned-clocks = <&cru SCLK_MAC>; |
| 99 |
assigned-clock-parents = <&ext_gmac>; |
| 100 |
pinctrl-names = "default"; |
| 101 |
pinctrl-0 = <&rgmii_pins>; |
| 102 |
tx_delay = <0x30>; |
| 103 |
rx_delay = <0x10>; |
| 104 |
}; |
| 105 |
|
| 106 |
&i2c0 { |
| 107 |
status = "okay"; |
| 108 |
|
| 109 |
rk808: pmic@1b { |
| 110 |
compatible = "rockchip,rk808"; |
| 111 |
reg = <0x1b>; |
| 112 |
pinctrl-names = "default"; |
| 113 |
pinctrl-0 = <&pmic_int>, <&pmic_sleep>; |
| 114 |
interrupt-parent = <&gpio0>; |
| 115 |
interrupts = <RK_PA5 IRQ_TYPE_LEVEL_LOW>; |
| 116 |
system-power-controller; |
| 117 |
vcc1-supply = <&vcc_sys>; |
| 118 |
vcc2-supply = <&vcc_sys>; |
| 119 |
vcc3-supply = <&vcc_sys>; |
| 120 |
vcc4-supply = <&vcc_sys>; |
| 121 |
vcc6-supply = <&vcc_sys>; |
| 122 |
vcc7-supply = <&vcc_sys>; |
| 123 |
vcc8-supply = <&vcc_io>; |
| 124 |
vcc9-supply = <&vcc_sys>; |
| 125 |
vcc10-supply = <&vcc_sys>; |
| 126 |
vcc11-supply = <&vcc_sys>; |
| 127 |
vcc12-supply = <&vcc_io>; |
| 128 |
clock-output-names = "xin32k", "rk808-clkout2"; |
| 129 |
#clock-cells = <1>; |
| 130 |
|
| 131 |
regulators { |
| 132 |
vdd_cpu: DCDC_REG1 { |
| 133 |
regulator-always-on; |
| 134 |
regulator-boot-on; |
| 135 |
regulator-min-microvolt = <700000>; |
| 136 |
regulator-max-microvolt = <1500000>; |
| 137 |
regulator-name = "vdd_cpu"; |
| 138 |
}; |
| 139 |
|
| 140 |
vdd_log: DCDC_REG2 { |
| 141 |
regulator-always-on; |
| 142 |
regulator-boot-on; |
| 143 |
regulator-min-microvolt = <700000>; |
| 144 |
regulator-max-microvolt = <1500000>; |
| 145 |
regulator-name = "vdd_log"; |
| 146 |
}; |
| 147 |
|
| 148 |
vcc_ddr: DCDC_REG3 { |
| 149 |
regulator-always-on; |
| 150 |
regulator-boot-on; |
| 151 |
regulator-name = "vcc_ddr"; |
| 152 |
}; |
| 153 |
|
| 154 |
vcc_io: DCDC_REG4 { |
| 155 |
regulator-always-on; |
| 156 |
regulator-boot-on; |
| 157 |
regulator-min-microvolt = <3300000>; |
| 158 |
regulator-max-microvolt = <3300000>; |
| 159 |
regulator-name = "vcc_io"; |
| 160 |
}; |
| 161 |
|
| 162 |
vcc18_flash: LDO_REG1 { |
| 163 |
regulator-always-on; |
| 164 |
regulator-boot-on; |
| 165 |
regulator-min-microvolt = <1800000>; |
| 166 |
regulator-max-microvolt = <1800000>; |
| 167 |
regulator-name = "vcc18_flash"; |
| 168 |
}; |
| 169 |
|
| 170 |
vcc33_lcd: LDO_REG2 { |
| 171 |
regulator-always-on; |
| 172 |
regulator-boot-on; |
| 173 |
regulator-min-microvolt = <3300000>; |
| 174 |
regulator-max-microvolt = <3300000>; |
| 175 |
regulator-name = "vcc33_lcd"; |
| 176 |
}; |
| 177 |
|
| 178 |
vdd_10: LDO_REG3 { |
| 179 |
regulator-always-on; |
| 180 |
regulator-boot-on; |
| 181 |
regulator-min-microvolt = <1000000>; |
| 182 |
regulator-max-microvolt = <1000000>; |
| 183 |
regulator-name = "vdd_10"; |
| 184 |
}; |
| 185 |
|
| 186 |
vcca_18: LDO_REG4 { |
| 187 |
regulator-boot-on; |
| 188 |
regulator-min-microvolt = <1800000>; |
| 189 |
regulator-max-microvolt = <1800000>; |
| 190 |
regulator-name = "vcca_18"; |
| 191 |
}; |
| 192 |
|
| 193 |
vccio_sd: LDO_REG5 { |
| 194 |
regulator-always-on; |
| 195 |
regulator-boot-on; |
| 196 |
regulator-min-microvolt = <1800000>; |
| 197 |
regulator-max-microvolt = <3300000>; |
| 198 |
regulator-name = "vccio_sd"; |
| 199 |
}; |
| 200 |
|
| 201 |
vdd10_lcd: LDO_REG6 { |
| 202 |
regulator-always-on; |
| 203 |
regulator-boot-on; |
| 204 |
regulator-min-microvolt = <1000000>; |
| 205 |
regulator-max-microvolt = <1000000>; |
| 206 |
regulator-name = "vdd10_lcd"; |
| 207 |
}; |
| 208 |
|
| 209 |
vcc_18: LDO_REG7 { |
| 210 |
regulator-always-on; |
| 211 |
regulator-boot-on; |
| 212 |
regulator-min-microvolt = <1800000>; |
| 213 |
regulator-max-microvolt = <1800000>; |
| 214 |
regulator-name = "vcc_18"; |
| 215 |
}; |
| 216 |
|
| 217 |
vcc18_lcd: LDO_REG8 { |
| 218 |
regulator-always-on; |
| 219 |
regulator-boot-on; |
| 220 |
regulator-min-microvolt = <1800000>; |
| 221 |
regulator-max-microvolt = <1800000>; |
| 222 |
regulator-name = "vcc18_lcd"; |
| 223 |
}; |
| 224 |
|
| 225 |
vcc_sd: SWITCH_REG1 { |
| 226 |
regulator-name = "vcc_sd"; |
| 227 |
}; |
| 228 |
|
| 229 |
vcc_lan: SWITCH_REG2 { |
| 230 |
regulator-always-on; |
| 231 |
regulator-boot-on; |
| 232 |
regulator-name = "vcc_lan"; |
| 233 |
}; |
| 234 |
}; |
| 235 |
}; |
| 236 |
}; |
| 237 |
|
| 238 |
&pinctrl { |
| 239 |
ir { |
| 240 |
ir_int: ir-int { |
| 241 |
rockchip,pins = <3 RK_PD6 RK_FUNC_GPIO &pcfg_pull_none>; |
| 242 |
}; |
| 243 |
}; |
| 244 |
|
| 245 |
keys { |
| 246 |
pwr_key: pwr-key { |
| 247 |
rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>; |
| 248 |
}; |
| 249 |
}; |
| 250 |
|
| 251 |
pmic { |
| 252 |
pmic_sleep: pmic-sleep { |
| 253 |
rockchip,pins = <0 RK_PA0 2 &pcfg_pull_none>; |
| 254 |
}; |
| 255 |
|
| 256 |
pmic_int: pmic-int { |
| 257 |
rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>; |
| 258 |
}; |
| 259 |
}; |
| 260 |
}; |
| 261 |
|
| 262 |
&tsadc { |
| 263 |
status = "okay"; |
| 264 |
rockchip,hw-tshut-mode = <0>; /* CRU */ |
| 265 |
rockchip,hw-tshut-polarity = <1>; /* high */ |
| 266 |
}; |
| 267 |
|
| 268 |
&uart2 { |
| 269 |
status = "okay"; |
| 270 |
}; |
| 271 |
|
| 272 |
&usb_host0_ehci { |
| 273 |
status = "okay"; |
| 274 |
}; |
| 275 |
|
| 276 |
&usb_otg { |
| 277 |
status = "okay"; |
| 278 |
}; |
| 279 |
|
| 280 |
&wdt { |
| 281 |
status = "okay"; |
| 282 |
}; |