| 1 |
// SPDX-License-Identifier: (GPL-2.0+ OR MIT) |
| 2 |
/* |
| 3 |
* (C) Copyright 2020 Chen-Yu Tsai <[email protected]> |
| 4 |
* |
| 5 |
* Based on ./rk3328-rock64.dts, which is |
| 6 |
* |
| 7 |
* Copyright (c) 2017 PINE64 |
| 8 |
*/ |
| 9 |
|
| 10 |
/dts-v1/; |
| 11 |
|
| 12 |
#include <dt-bindings/gpio/gpio.h> |
| 13 |
#include <dt-bindings/input/input.h> |
| 14 |
#include <dt-bindings/leds/common.h> |
| 15 |
#include <dt-bindings/pinctrl/rockchip.h> |
| 16 |
|
| 17 |
#include "rk3328.dtsi" |
| 18 |
|
| 19 |
/ { |
| 20 |
model = "Radxa ROCK Pi E"; |
| 21 |
compatible = "radxa,rockpi-e", "rockchip,rk3328"; |
| 22 |
|
| 23 |
aliases { |
| 24 |
ethernet0 = &gmac2io; |
| 25 |
ethernet1 = &gmac2phy; |
| 26 |
mmc0 = &sdmmc; |
| 27 |
mmc1 = &emmc; |
| 28 |
}; |
| 29 |
|
| 30 |
chosen { |
| 31 |
stdout-path = "serial2:1500000n8"; |
| 32 |
}; |
| 33 |
|
| 34 |
adc-keys { |
| 35 |
compatible = "adc-keys"; |
| 36 |
io-channels = <&saradc 0>; |
| 37 |
io-channel-names = "buttons"; |
| 38 |
keyup-threshold-microvolt = <1750000>; |
| 39 |
|
| 40 |
/* This button is unpopulated out of the factory. */ |
| 41 |
button-recovery { |
| 42 |
label = "Recovery"; |
| 43 |
linux,code = <KEY_VENDOR>; |
| 44 |
press-threshold-microvolt = <10000>; |
| 45 |
}; |
| 46 |
}; |
| 47 |
|
| 48 |
gmac_clkin: external-gmac-clock { |
| 49 |
compatible = "fixed-clock"; |
| 50 |
clock-frequency = <125000000>; |
| 51 |
clock-output-names = "gmac_clkin"; |
| 52 |
#clock-cells = <0>; |
| 53 |
}; |
| 54 |
|
| 55 |
leds { |
| 56 |
compatible = "gpio-leds"; |
| 57 |
pinctrl-0 = <&led_pin>; |
| 58 |
pinctrl-names = "default"; |
| 59 |
|
| 60 |
led-0 { |
| 61 |
color = <LED_COLOR_ID_BLUE>; |
| 62 |
gpios = <&gpio3 RK_PA5 GPIO_ACTIVE_LOW>; |
| 63 |
linux,default-trigger = "heartbeat"; |
| 64 |
}; |
| 65 |
}; |
| 66 |
|
| 67 |
vcc_sd: regulator-sdmmc { |
| 68 |
compatible = "regulator-fixed"; |
| 69 |
gpio = <&gpio0 RK_PD6 GPIO_ACTIVE_LOW>; |
| 70 |
pinctrl-names = "default"; |
| 71 |
pinctrl-0 = <&sdmmc0m1_pin>; |
| 72 |
regulator-name = "vcc_sd"; |
| 73 |
regulator-boot-on; |
| 74 |
vin-supply = <&vcc_io>; |
| 75 |
}; |
| 76 |
|
| 77 |
vcc_host_5v: regulator-vcc-host-5v { |
| 78 |
compatible = "regulator-fixed"; |
| 79 |
gpio = <&gpio3 RK_PA7 GPIO_ACTIVE_HIGH>; |
| 80 |
pinctrl-names = "default"; |
| 81 |
pinctrl-0 = <&usb30_host_drv>; |
| 82 |
enable-active-high; |
| 83 |
regulator-name = "vcc_host_5v"; |
| 84 |
regulator-always-on; |
| 85 |
regulator-boot-on; |
| 86 |
vin-supply = <&vcc_sys>; |
| 87 |
}; |
| 88 |
|
| 89 |
vcc_sys: regulator-vcc-sys { |
| 90 |
compatible = "regulator-fixed"; |
| 91 |
regulator-name = "vcc_sys"; |
| 92 |
regulator-always-on; |
| 93 |
regulator-boot-on; |
| 94 |
regulator-min-microvolt = <5000000>; |
| 95 |
regulator-max-microvolt = <5000000>; |
| 96 |
}; |
| 97 |
|
| 98 |
vcc_wifi: regulator-vcc-wifi { |
| 99 |
compatible = "regulator-fixed"; |
| 100 |
gpio = <&gpio0 RK_PA0 GPIO_ACTIVE_LOW>; |
| 101 |
pinctrl-names = "default"; |
| 102 |
pinctrl-0 = <&wifi_en>; |
| 103 |
regulator-name = "vcc_wifi"; |
| 104 |
regulator-always-on; |
| 105 |
regulator-boot-on; |
| 106 |
vin-supply = <&vcc_io>; |
| 107 |
}; |
| 108 |
}; |
| 109 |
|
| 110 |
&analog_sound { |
| 111 |
status = "okay"; |
| 112 |
}; |
| 113 |
|
| 114 |
&codec { |
| 115 |
status = "okay"; |
| 116 |
}; |
| 117 |
|
| 118 |
&cpu0 { |
| 119 |
cpu-supply = <&vdd_arm>; |
| 120 |
}; |
| 121 |
|
| 122 |
&cpu1 { |
| 123 |
cpu-supply = <&vdd_arm>; |
| 124 |
}; |
| 125 |
|
| 126 |
&cpu2 { |
| 127 |
cpu-supply = <&vdd_arm>; |
| 128 |
}; |
| 129 |
|
| 130 |
&cpu3 { |
| 131 |
cpu-supply = <&vdd_arm>; |
| 132 |
}; |
| 133 |
|
| 134 |
&emmc { |
| 135 |
bus-width = <8>; |
| 136 |
cap-mmc-highspeed; |
| 137 |
mmc-ddr-1_8v; |
| 138 |
mmc-hs200-1_8v; |
| 139 |
non-removable; |
| 140 |
pinctrl-names = "default"; |
| 141 |
pinctrl-0 = <&emmc_clk>, <&emmc_cmd>, <&emmc_bus8>; |
| 142 |
vmmc-supply = <&vcc_io>; |
| 143 |
vqmmc-supply = <&vcc18_emmc>; |
| 144 |
status = "okay"; |
| 145 |
}; |
| 146 |
|
| 147 |
&gmac2io { |
| 148 |
assigned-clocks = <&cru SCLK_MAC2IO>, <&cru SCLK_MAC2IO_EXT>; |
| 149 |
assigned-clock-parents = <&gmac_clkin>, <&gmac_clkin>; |
| 150 |
clock_in_out = "input"; |
| 151 |
phy-handle = <&rtl8211>; |
| 152 |
phy-mode = "rgmii"; |
| 153 |
phy-supply = <&vcc_io>; |
| 154 |
pinctrl-names = "default"; |
| 155 |
pinctrl-0 = <&rgmiim1_pins>; |
| 156 |
tx_delay = <0x26>; |
| 157 |
rx_delay = <0x11>; |
| 158 |
status = "okay"; |
| 159 |
|
| 160 |
mdio { |
| 161 |
compatible = "snps,dwmac-mdio"; |
| 162 |
#address-cells = <1>; |
| 163 |
#size-cells = <0>; |
| 164 |
|
| 165 |
rtl8211: ethernet-phy@1 { |
| 166 |
reg = <1>; |
| 167 |
pinctrl-0 = <ð_phy_int_pin>, <ð_phy_reset_pin>; |
| 168 |
pinctrl-names = "default"; |
| 169 |
interrupt-parent = <&gpio1>; |
| 170 |
interrupts = <24 IRQ_TYPE_LEVEL_LOW>; |
| 171 |
reset-assert-us = <10000>; |
| 172 |
reset-deassert-us = <50000>; |
| 173 |
reset-gpios = <&gpio1 RK_PC2 GPIO_ACTIVE_LOW>; |
| 174 |
}; |
| 175 |
}; |
| 176 |
}; |
| 177 |
|
| 178 |
&gmac2phy { |
| 179 |
status = "okay"; |
| 180 |
}; |
| 181 |
|
| 182 |
&gpio0 { |
| 183 |
gpio-line-names = |
| 184 |
/* GPIO0_A0 - A7 */ |
| 185 |
"", "", "", "", "", "", "", "", |
| 186 |
/* GPIO0_B0 - B7 */ |
| 187 |
"", "", "", "", "", "", "", "", |
| 188 |
/* GPIO0_C0 - C7 */ |
| 189 |
"", "", "", "", "", "", "", "", |
| 190 |
/* GPIO0_D0 - D7 */ |
| 191 |
"", "", "", "pin-15 [GPIO0_D3]", "", "", "", ""; |
| 192 |
}; |
| 193 |
|
| 194 |
&gpio1 { |
| 195 |
gpio-line-names = |
| 196 |
/* GPIO1_A0 - A7 */ |
| 197 |
"", "", "", "", "", "", "", "", |
| 198 |
/* GPIO1_B0 - B7 */ |
| 199 |
"", "", "", "", "", "", "", "", |
| 200 |
/* GPIO1_C0 - C7 */ |
| 201 |
"", "", "", "", "", "", "", "", |
| 202 |
/* GPIO1_D0 - D7 */ |
| 203 |
"", "", "", "", "pin-07 [GPIO1_D4]", "", "", ""; |
| 204 |
}; |
| 205 |
|
| 206 |
&gpio2 { |
| 207 |
gpio-line-names = |
| 208 |
/* GPIO2_A0 - A7 */ |
| 209 |
"pin-08 [GPIO2_A0]", "pin-10 [GPIO2_A1]", "pin-11 [GPIO2_A2]", |
| 210 |
"pin-13 [GPIO2-A3]", "pin-27 [GPIO2_A4]", "pin-28 [GPIO2_A5]", |
| 211 |
"pin-33 [GPIO2_A6]", "", |
| 212 |
/* GPIO2_B0 - B7 */ |
| 213 |
"", "", "", "", "pin-26 [GPIO2_B4]", "", "", "pin-36 [GPIO2_B7]", |
| 214 |
/* GPIO2_C0 - C7 */ |
| 215 |
"pin-32 [GPIO2_C0]", "pin-35 [GPIO2_C1]", "pin-12 [GPIO2_C2]", |
| 216 |
"pin-38 [GPIO2_C3]", "pin-29 [GPIO2_C4]", "pin-31 [GPIO2_C5]", |
| 217 |
"pin-37 [GPIO2_C6]", "pin-40 [GPIO2_C7]", |
| 218 |
/* GPIO2_D0 - D7 */ |
| 219 |
"", "", "", "", "", "", "", ""; |
| 220 |
}; |
| 221 |
|
| 222 |
&gpio3 { |
| 223 |
gpio-line-names = |
| 224 |
/* GPIO3_A0 - A7 */ |
| 225 |
"pin-23 [GPIO3_A0]", "pin-19 [GPIO3_A1]", "pin-21 [GPIO3_A2]", |
| 226 |
"", "pin-03 [GPIO3_A4]", "", "pin-05 [GPIO3_A6]", "", |
| 227 |
/* GPIO3_B0 - B7 */ |
| 228 |
"pin-24 [GPIO3_B0]", "", "", "", "", "", "", "", |
| 229 |
/* GPIO3_C0 - C7 */ |
| 230 |
"", "", "", "", "", "", "", "", |
| 231 |
/* GPIO3_D0 - D7 */ |
| 232 |
"", "", "", "", "", "", "", ""; |
| 233 |
}; |
| 234 |
|
| 235 |
&i2c1 { |
| 236 |
status = "okay"; |
| 237 |
|
| 238 |
rk805: pmic@18 { |
| 239 |
compatible = "rockchip,rk805"; |
| 240 |
reg = <0x18>; |
| 241 |
interrupt-parent = <&gpio0>; |
| 242 |
interrupts = <2 IRQ_TYPE_LEVEL_LOW>; |
| 243 |
#clock-cells = <1>; |
| 244 |
clock-output-names = "xin32k", "rk805-clkout2"; |
| 245 |
gpio-controller; |
| 246 |
#gpio-cells = <2>; |
| 247 |
pinctrl-names = "default"; |
| 248 |
pinctrl-0 = <&pmic_int_l>; |
| 249 |
system-power-controller; |
| 250 |
wakeup-source; |
| 251 |
|
| 252 |
vcc1-supply = <&vcc_sys>; |
| 253 |
vcc2-supply = <&vcc_sys>; |
| 254 |
vcc3-supply = <&vcc_sys>; |
| 255 |
vcc4-supply = <&vcc_sys>; |
| 256 |
vcc5-supply = <&vcc_io>; |
| 257 |
vcc6-supply = <&vcc_sys>; |
| 258 |
|
| 259 |
regulators { |
| 260 |
vdd_log: DCDC_REG1 { |
| 261 |
regulator-name = "vdd_log"; |
| 262 |
regulator-always-on; |
| 263 |
regulator-boot-on; |
| 264 |
regulator-min-microvolt = <712500>; |
| 265 |
regulator-max-microvolt = <1450000>; |
| 266 |
regulator-ramp-delay = <12500>; |
| 267 |
|
| 268 |
regulator-state-mem { |
| 269 |
regulator-on-in-suspend; |
| 270 |
regulator-suspend-microvolt = <1000000>; |
| 271 |
}; |
| 272 |
}; |
| 273 |
|
| 274 |
vdd_arm: DCDC_REG2 { |
| 275 |
regulator-name = "vdd_arm"; |
| 276 |
regulator-always-on; |
| 277 |
regulator-boot-on; |
| 278 |
regulator-min-microvolt = <712500>; |
| 279 |
regulator-max-microvolt = <1450000>; |
| 280 |
regulator-ramp-delay = <12500>; |
| 281 |
|
| 282 |
regulator-state-mem { |
| 283 |
regulator-on-in-suspend; |
| 284 |
regulator-suspend-microvolt = <950000>; |
| 285 |
}; |
| 286 |
}; |
| 287 |
|
| 288 |
vcc_ddr: DCDC_REG3 { |
| 289 |
regulator-name = "vcc_ddr"; |
| 290 |
regulator-always-on; |
| 291 |
regulator-boot-on; |
| 292 |
|
| 293 |
regulator-state-mem { |
| 294 |
regulator-on-in-suspend; |
| 295 |
}; |
| 296 |
}; |
| 297 |
|
| 298 |
vcc_io: DCDC_REG4 { |
| 299 |
regulator-name = "vcc_io"; |
| 300 |
regulator-always-on; |
| 301 |
regulator-boot-on; |
| 302 |
regulator-min-microvolt = <3300000>; |
| 303 |
regulator-max-microvolt = <3300000>; |
| 304 |
|
| 305 |
regulator-state-mem { |
| 306 |
regulator-on-in-suspend; |
| 307 |
regulator-suspend-microvolt = <3300000>; |
| 308 |
}; |
| 309 |
}; |
| 310 |
|
| 311 |
vcc_18: LDO_REG1 { |
| 312 |
regulator-name = "vcc_18"; |
| 313 |
regulator-always-on; |
| 314 |
regulator-boot-on; |
| 315 |
regulator-min-microvolt = <1800000>; |
| 316 |
regulator-max-microvolt = <1800000>; |
| 317 |
|
| 318 |
regulator-state-mem { |
| 319 |
regulator-on-in-suspend; |
| 320 |
regulator-suspend-microvolt = <1800000>; |
| 321 |
}; |
| 322 |
}; |
| 323 |
|
| 324 |
vcc18_emmc: LDO_REG2 { |
| 325 |
regulator-name = "vcc18_emmc"; |
| 326 |
regulator-always-on; |
| 327 |
regulator-boot-on; |
| 328 |
regulator-min-microvolt = <1800000>; |
| 329 |
regulator-max-microvolt = <1800000>; |
| 330 |
|
| 331 |
regulator-state-mem { |
| 332 |
regulator-on-in-suspend; |
| 333 |
regulator-suspend-microvolt = <1800000>; |
| 334 |
}; |
| 335 |
}; |
| 336 |
|
| 337 |
vdd_10: LDO_REG3 { |
| 338 |
regulator-name = "vdd_10"; |
| 339 |
regulator-always-on; |
| 340 |
regulator-boot-on; |
| 341 |
regulator-min-microvolt = <1000000>; |
| 342 |
regulator-max-microvolt = <1000000>; |
| 343 |
|
| 344 |
regulator-state-mem { |
| 345 |
regulator-on-in-suspend; |
| 346 |
regulator-suspend-microvolt = <1000000>; |
| 347 |
}; |
| 348 |
}; |
| 349 |
}; |
| 350 |
}; |
| 351 |
}; |
| 352 |
|
| 353 |
&i2s1 { |
| 354 |
status = "okay"; |
| 355 |
}; |
| 356 |
|
| 357 |
&io_domains { |
| 358 |
pmuio-supply = <&vcc_io>; |
| 359 |
vccio1-supply = <&vcc_io>; |
| 360 |
vccio2-supply = <&vcc18_emmc>; |
| 361 |
vccio3-supply = <&vcc_io>; |
| 362 |
vccio4-supply = <&vcc_io>; |
| 363 |
vccio5-supply = <&vcc_io>; |
| 364 |
vccio6-supply = <&vcc_io>; |
| 365 |
status = "okay"; |
| 366 |
}; |
| 367 |
|
| 368 |
&pinctrl { |
| 369 |
ephy { |
| 370 |
eth_phy_int_pin: eth-phy-int-pin { |
| 371 |
rockchip,pins = <1 RK_PD0 RK_FUNC_GPIO &pcfg_pull_down>; |
| 372 |
}; |
| 373 |
|
| 374 |
eth_phy_reset_pin: eth-phy-reset-pin { |
| 375 |
rockchip,pins = <1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_down>; |
| 376 |
}; |
| 377 |
}; |
| 378 |
|
| 379 |
leds { |
| 380 |
led_pin: led-pin { |
| 381 |
rockchip,pins = <3 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>; |
| 382 |
}; |
| 383 |
}; |
| 384 |
|
| 385 |
pmic { |
| 386 |
pmic_int_l: pmic-int-l { |
| 387 |
rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>; |
| 388 |
}; |
| 389 |
}; |
| 390 |
|
| 391 |
usb3 { |
| 392 |
usb30_host_drv: usb30-host-drv { |
| 393 |
rockchip,pins = <3 RK_PA7 RK_FUNC_GPIO &pcfg_pull_none>; |
| 394 |
}; |
| 395 |
}; |
| 396 |
|
| 397 |
wifi { |
| 398 |
wifi_en: wifi-en { |
| 399 |
rockchip,pins = <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>; |
| 400 |
}; |
| 401 |
}; |
| 402 |
}; |
| 403 |
|
| 404 |
&sdmmc { |
| 405 |
bus-width = <4>; |
| 406 |
cap-sd-highspeed; |
| 407 |
disable-wp; |
| 408 |
pinctrl-names = "default"; |
| 409 |
pinctrl-0 = <&sdmmc0_clk>, <&sdmmc0_cmd>, <&sdmmc0_dectn>, <&sdmmc0_bus4>; |
| 410 |
vmmc-supply = <&vcc_sd>; |
| 411 |
status = "okay"; |
| 412 |
}; |
| 413 |
|
| 414 |
&saradc { |
| 415 |
vref-supply = <&vcc_18>; |
| 416 |
status = "okay"; |
| 417 |
}; |
| 418 |
|
| 419 |
&tsadc { |
| 420 |
status = "okay"; |
| 421 |
}; |
| 422 |
|
| 423 |
&u2phy { |
| 424 |
status = "okay"; |
| 425 |
}; |
| 426 |
|
| 427 |
&u2phy_host { |
| 428 |
status = "okay"; |
| 429 |
}; |
| 430 |
|
| 431 |
&u2phy_otg { |
| 432 |
status = "okay"; |
| 433 |
}; |
| 434 |
|
| 435 |
&uart2 { |
| 436 |
status = "okay"; |
| 437 |
}; |
| 438 |
|
| 439 |
&usb20_otg { |
| 440 |
status = "okay"; |
| 441 |
}; |
| 442 |
|
| 443 |
&usbdrd3 { |
| 444 |
dr_mode = "host"; |
| 445 |
status = "okay"; |
| 446 |
}; |
| 447 |
|
| 448 |
&usb_host0_ehci { |
| 449 |
status = "okay"; |
| 450 |
}; |