Debian Codegraph @

scripts/dtc/include-prefixes/arm64/rockchip/rk3328-roc.dtsi

raw
1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
2 /*
3 * Copyright (c) 2017 T-Chip Intelligent Technology Co., Ltd
4 */
5
6 /dts-v1/;
7
8 #include "rk3328.dtsi"
9
10 / {
11 aliases {
12 ethernet0 = &gmac2io;
13 mmc0 = &sdmmc;
14 mmc1 = &emmc;
15 };
16
17 chosen {
18 stdout-path = "serial2:1500000n8";
19 };
20
21 gmac_clkin: external-gmac-clock {
22 compatible = "fixed-clock";
23 clock-frequency = <125000000>;
24 clock-output-names = "gmac_clkin";
25 #clock-cells = <0>;
26 };
27
28 dc_12v: regulator-dc-12v {
29 compatible = "regulator-fixed";
30 regulator-name = "dc_12v";
31 regulator-always-on;
32 regulator-boot-on;
33 regulator-min-microvolt = <12000000>;
34 regulator-max-microvolt = <12000000>;
35 };
36
37 vcc_sd: regulator-sdmmc {
38 compatible = "regulator-fixed";
39 gpio = <&gpio0 RK_PD6 GPIO_ACTIVE_LOW>;
40 pinctrl-names = "default";
41 pinctrl-0 = <&sdmmc0m1_pin>;
42 regulator-boot-on;
43 regulator-name = "vcc_sd";
44 regulator-min-microvolt = <3300000>;
45 regulator-max-microvolt = <3300000>;
46 vin-supply = <&vcc_io>;
47 };
48
49 vcc_sdio: regulator-sdmmcio {
50 compatible = "regulator-gpio";
51 states = <1800000 0x1>, <3300000 0x0>;
52 regulator-name = "vcc_sdio";
53 regulator-type = "voltage";
54 regulator-min-microvolt = <1800000>;
55 regulator-max-microvolt = <3300000>;
56 regulator-always-on;
57 vin-supply = <&vcc_sys>;
58 };
59
60 vcc_host1_5v: vcc_otg_5v: regulator-vcc-host1-5v {
61 compatible = "regulator-fixed";
62 enable-active-high;
63 pinctrl-names = "default";
64 pinctrl-0 = <&usb20_host_drv>;
65 regulator-name = "vcc_host1_5v";
66 regulator-always-on;
67 vin-supply = <&vcc_sys>;
68 };
69
70 vcc_sys: regulator-vcc-sys {
71 compatible = "regulator-fixed";
72 regulator-name = "vcc_sys";
73 regulator-always-on;
74 regulator-boot-on;
75 regulator-min-microvolt = <5000000>;
76 regulator-max-microvolt = <5000000>;
77 vin-supply = <&dc_12v>;
78 };
79
80 vcc_phy: regulator-vcc-phy {
81 compatible = "regulator-fixed";
82 regulator-name = "vcc_phy";
83 regulator-always-on;
84 regulator-boot-on;
85 };
86
87 ir-receiver {
88 compatible = "gpio-ir-receiver";
89 gpios = <&gpio2 RK_PA2 GPIO_ACTIVE_LOW>;
90 pinctrl-0 = <&ir_int>;
91 pinctrl-names = "default";
92 };
93
94 leds {
95 compatible = "gpio-leds";
96
97 power_led: led-0 {
98 label = "firefly:blue:power";
99 linux,default-trigger = "heartbeat";
100 gpios = <&rk805 1 GPIO_ACTIVE_LOW>;
101 default-state = "on";
102 };
103
104 user_led: led-1 {
105 label = "firefly:yellow:user";
106 linux,default-trigger = "mmc1";
107 gpios = <&rk805 0 GPIO_ACTIVE_LOW>;
108 default-state = "off";
109 };
110 };
111 };
112
113 &analog_sound {
114 status = "okay";
115 };
116
117 &codec {
118 status = "okay";
119 };
120
121 &cpu0 {
122 cpu-supply = <&vdd_arm>;
123 };
124
125 &cpu1 {
126 cpu-supply = <&vdd_arm>;
127 };
128
129 &cpu2 {
130 cpu-supply = <&vdd_arm>;
131 };
132
133 &cpu3 {
134 cpu-supply = <&vdd_arm>;
135 };
136
137 &emmc {
138 bus-width = <8>;
139 cap-mmc-highspeed;
140 max-frequency = <150000000>;
141 mmc-ddr-1_8v;
142 mmc-hs200-1_8v;
143 non-removable;
144 pinctrl-names = "default";
145 pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus8>;
146 vmmc-supply = <&vcc_io>;
147 vqmmc-supply = <&vcc18_emmc>;
148 status = "okay";
149 };
150
151 &gmac2io {
152 assigned-clocks = <&cru SCLK_MAC2IO>, <&cru SCLK_MAC2IO_EXT>;
153 assigned-clock-parents = <&gmac_clkin>, <&gmac_clkin>;
154 clock_in_out = "input";
155 phy-supply = <&vcc_phy>;
156 phy-mode = "rgmii";
157 pinctrl-names = "default";
158 pinctrl-0 = <&rgmiim1_pins>;
159 snps,aal;
160 snps,reset-gpio = <&gpio1 RK_PC2 GPIO_ACTIVE_LOW>;
161 snps,reset-active-low;
162 snps,reset-delays-us = <0 10000 50000>;
163 snps,rxpbl = <0x4>;
164 snps,txpbl = <0x4>;
165 tx_delay = <0x24>;
166 rx_delay = <0x18>;
167 status = "okay";
168 };
169
170 &gpu {
171 mali-supply = <&vdd_logic>;
172 };
173
174 &hdmi {
175 status = "okay";
176 };
177
178 &hdmiphy {
179 status = "okay";
180 };
181
182 &hdmi_sound {
183 status = "okay";
184 };
185
186 &i2c1 {
187 status = "okay";
188
189 rk805: pmic@18 {
190 compatible = "rockchip,rk805";
191 reg = <0x18>;
192 #clock-cells = <1>;
193 clock-output-names = "xin32k", "rk805-clkout2";
194 gpio-controller;
195 #gpio-cells = <2>;
196 pinctrl-names = "default";
197 pinctrl-0 = <&pmic_int_l>;
198 system-power-controller;
199 wakeup-source;
200
201 vcc1-supply = <&vcc_sys>;
202 vcc2-supply = <&vcc_sys>;
203 vcc3-supply = <&vcc_sys>;
204 vcc4-supply = <&vcc_sys>;
205 vcc5-supply = <&vcc_io>;
206 vcc6-supply = <&vcc_io>;
207
208 regulators {
209 vdd_logic: DCDC_REG1 {
210 regulator-name = "vdd_logic";
211 regulator-min-microvolt = <712500>;
212 regulator-max-microvolt = <1450000>;
213 regulator-always-on;
214 regulator-boot-on;
215 regulator-state-mem {
216 regulator-on-in-suspend;
217 regulator-suspend-microvolt = <1000000>;
218 };
219 };
220
221 vdd_arm: DCDC_REG2 {
222 regulator-name = "vdd_arm";
223 regulator-min-microvolt = <712500>;
224 regulator-max-microvolt = <1450000>;
225 regulator-always-on;
226 regulator-boot-on;
227 regulator-state-mem {
228 regulator-on-in-suspend;
229 regulator-suspend-microvolt = <950000>;
230 };
231 };
232
233 vcc_ddr: DCDC_REG3 {
234 regulator-name = "vcc_ddr";
235 regulator-always-on;
236 regulator-boot-on;
237 regulator-state-mem {
238 regulator-on-in-suspend;
239 };
240 };
241
242 vcc_io: DCDC_REG4 {
243 regulator-name = "vcc_io";
244 regulator-min-microvolt = <3300000>;
245 regulator-max-microvolt = <3300000>;
246 regulator-always-on;
247 regulator-boot-on;
248 regulator-state-mem {
249 regulator-on-in-suspend;
250 regulator-suspend-microvolt = <3300000>;
251 };
252 };
253
254 vcc_18: LDO_REG1 {
255 regulator-name = "vcc_18";
256 regulator-min-microvolt = <1800000>;
257 regulator-max-microvolt = <1800000>;
258 regulator-always-on;
259 regulator-boot-on;
260 regulator-state-mem {
261 regulator-on-in-suspend;
262 regulator-suspend-microvolt = <1800000>;
263 };
264 };
265
266 vcc18_emmc: LDO_REG2 {
267 regulator-name = "vcc18_emmc";
268 regulator-min-microvolt = <1800000>;
269 regulator-max-microvolt = <1800000>;
270 regulator-always-on;
271 regulator-boot-on;
272 regulator-state-mem {
273 regulator-on-in-suspend;
274 regulator-suspend-microvolt = <1800000>;
275 };
276 };
277
278 vdd_10: LDO_REG3 {
279 regulator-name = "vdd_10";
280 regulator-min-microvolt = <1000000>;
281 regulator-max-microvolt = <1000000>;
282 regulator-always-on;
283 regulator-boot-on;
284 regulator-state-mem {
285 regulator-on-in-suspend;
286 regulator-suspend-microvolt = <1000000>;
287 };
288 };
289 };
290 };
291 };
292
293 &i2s0 {
294 status = "okay";
295 };
296
297 &i2s1 {
298 status = "okay";
299 };
300
301 &io_domains {
302 status = "okay";
303
304 vccio1-supply = <&vcc_io>;
305 vccio2-supply = <&vcc18_emmc>;
306 vccio3-supply = <&vcc_sdio>;
307 vccio4-supply = <&vcc_18>;
308 vccio5-supply = <&vcc_io>;
309 vccio6-supply = <&vcc_io>;
310 pmuio-supply = <&vcc_io>;
311 };
312
313 &pinctrl {
314 ir {
315 ir_int: ir-int {
316 rockchip,pins = <2 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
317 };
318 };
319
320 pmic {
321 pmic_int_l: pmic-int-l {
322 rockchip,pins = <1 RK_PD0 RK_FUNC_GPIO &pcfg_pull_up>;
323 };
324 };
325
326 usb2 {
327 usb20_host_drv: usb20-host-drv {
328 rockchip,pins = <1 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
329 };
330 };
331 };
332
333 &sdmmc {
334 bus-width = <4>;
335 cap-mmc-highspeed;
336 cap-sd-highspeed;
337 disable-wp;
338 max-frequency = <150000000>;
339 pinctrl-names = "default";
340 pinctrl-0 = <&sdmmc0_clk &sdmmc0_cmd &sdmmc0_dectn &sdmmc0_bus4>;
341 sd-uhs-sdr12;
342 sd-uhs-sdr25;
343 sd-uhs-sdr50;
344 sd-uhs-sdr104;
345 vmmc-supply = <&vcc_sd>;
346 vqmmc-supply = <&vcc_sdio>;
347 status = "okay";
348 };
349
350 &tsadc {
351 status = "okay";
352 };
353
354 &u2phy {
355 status = "okay";
356 };
357
358 &u2phy_host {
359 status = "okay";
360 };
361
362 &u2phy_otg {
363 status = "okay";
364 };
365
366 &uart2 {
367 status = "okay";
368 };
369
370 &usb20_otg {
371 dr_mode = "host";
372 status = "okay";
373 };
374
375 &usbdrd3 {
376 dr_mode = "host";
377 status = "okay";
378 };
379
380 &usb_host0_ehci {
381 status = "okay";
382 };
383
384 &usb_host0_ohci {
385 status = "okay";
386 };
387
388 &vop {
389 status = "okay";
390 };
391
392 &vop_mmu {
393 status = "okay";
394 };