| 1 |
// SPDX-License-Identifier: (GPL-2.0+ OR MIT) |
| 2 |
/* |
| 3 |
* Based on rk3328-nanopi-r2s.dts, which is: |
| 4 |
* Copyright (c) 2020 David Bauer <[email protected]> |
| 5 |
*/ |
| 6 |
|
| 7 |
/dts-v1/; |
| 8 |
|
| 9 |
#include <dt-bindings/gpio/gpio.h> |
| 10 |
#include <dt-bindings/leds/common.h> |
| 11 |
#include "rk3328.dtsi" |
| 12 |
|
| 13 |
/ { |
| 14 |
aliases { |
| 15 |
ethernet0 = &gmac2io; |
| 16 |
ethernet1 = &rtl8153; |
| 17 |
mmc0 = &sdmmc; |
| 18 |
}; |
| 19 |
|
| 20 |
chosen { |
| 21 |
stdout-path = "serial2:1500000n8"; |
| 22 |
}; |
| 23 |
|
| 24 |
gmac_clk: gmac-clock { |
| 25 |
compatible = "fixed-clock"; |
| 26 |
clock-frequency = <125000000>; |
| 27 |
clock-output-names = "gmac_clkin"; |
| 28 |
#clock-cells = <0>; |
| 29 |
}; |
| 30 |
|
| 31 |
leds { |
| 32 |
compatible = "gpio-leds"; |
| 33 |
pinctrl-0 = <&lan_led_pin>, <&sys_led_pin>, <&wan_led_pin>; |
| 34 |
pinctrl-names = "default"; |
| 35 |
|
| 36 |
led-0 { |
| 37 |
function = LED_FUNCTION_LAN; |
| 38 |
color = <LED_COLOR_ID_GREEN>; |
| 39 |
gpios = <&gpio2 RK_PB7 GPIO_ACTIVE_HIGH>; |
| 40 |
}; |
| 41 |
|
| 42 |
led-1 { |
| 43 |
function = LED_FUNCTION_STATUS; |
| 44 |
color = <LED_COLOR_ID_RED>; |
| 45 |
gpios = <&gpio3 RK_PC5 GPIO_ACTIVE_HIGH>; |
| 46 |
linux,default-trigger = "heartbeat"; |
| 47 |
}; |
| 48 |
|
| 49 |
led-2 { |
| 50 |
function = LED_FUNCTION_WAN; |
| 51 |
color = <LED_COLOR_ID_GREEN>; |
| 52 |
gpios = <&gpio2 RK_PC2 GPIO_ACTIVE_HIGH>; |
| 53 |
}; |
| 54 |
}; |
| 55 |
|
| 56 |
vcc_sd: regulator-sdmmc { |
| 57 |
compatible = "regulator-fixed"; |
| 58 |
gpio = <&gpio0 RK_PD6 GPIO_ACTIVE_LOW>; |
| 59 |
pinctrl-0 = <&sdmmc0m1_pin>; |
| 60 |
pinctrl-names = "default"; |
| 61 |
regulator-name = "vcc_sd"; |
| 62 |
regulator-boot-on; |
| 63 |
vin-supply = <&vcc_io>; |
| 64 |
}; |
| 65 |
|
| 66 |
vcc_sys: regulator-vcc-sys { |
| 67 |
compatible = "regulator-fixed"; |
| 68 |
regulator-name = "vcc_sys"; |
| 69 |
regulator-always-on; |
| 70 |
regulator-boot-on; |
| 71 |
regulator-min-microvolt = <5000000>; |
| 72 |
regulator-max-microvolt = <5000000>; |
| 73 |
}; |
| 74 |
|
| 75 |
vdd_5v_lan: regulator-vdd-5v-lan { |
| 76 |
compatible = "regulator-fixed"; |
| 77 |
enable-active-high; |
| 78 |
gpio = <&gpio2 RK_PC6 GPIO_ACTIVE_HIGH>; |
| 79 |
pinctrl-0 = <&lan_vdd_pin>; |
| 80 |
pinctrl-names = "default"; |
| 81 |
regulator-name = "vdd_5v_lan"; |
| 82 |
regulator-always-on; |
| 83 |
regulator-boot-on; |
| 84 |
vin-supply = <&vcc_sys>; |
| 85 |
}; |
| 86 |
}; |
| 87 |
|
| 88 |
&cpu0 { |
| 89 |
cpu-supply = <&vdd_arm>; |
| 90 |
}; |
| 91 |
|
| 92 |
&cpu1 { |
| 93 |
cpu-supply = <&vdd_arm>; |
| 94 |
}; |
| 95 |
|
| 96 |
&cpu2 { |
| 97 |
cpu-supply = <&vdd_arm>; |
| 98 |
}; |
| 99 |
|
| 100 |
&cpu3 { |
| 101 |
cpu-supply = <&vdd_arm>; |
| 102 |
}; |
| 103 |
|
| 104 |
&display_subsystem { |
| 105 |
status = "disabled"; |
| 106 |
}; |
| 107 |
|
| 108 |
&gmac2io { |
| 109 |
assigned-clocks = <&cru SCLK_MAC2IO>, <&cru SCLK_MAC2IO_EXT>; |
| 110 |
assigned-clock-parents = <&gmac_clk>, <&gmac_clk>; |
| 111 |
clock_in_out = "input"; |
| 112 |
phy-supply = <&vcc_io>; |
| 113 |
pinctrl-0 = <&rgmiim1_pins>; |
| 114 |
pinctrl-names = "default"; |
| 115 |
|
| 116 |
mdio { |
| 117 |
compatible = "snps,dwmac-mdio"; |
| 118 |
#address-cells = <1>; |
| 119 |
#size-cells = <0>; |
| 120 |
}; |
| 121 |
}; |
| 122 |
|
| 123 |
&i2c1 { |
| 124 |
status = "okay"; |
| 125 |
|
| 126 |
rk805: pmic@18 { |
| 127 |
compatible = "rockchip,rk805"; |
| 128 |
reg = <0x18>; |
| 129 |
interrupt-parent = <&gpio1>; |
| 130 |
interrupts = <24 IRQ_TYPE_LEVEL_LOW>; |
| 131 |
#clock-cells = <1>; |
| 132 |
clock-output-names = "xin32k", "rk805-clkout2"; |
| 133 |
gpio-controller; |
| 134 |
#gpio-cells = <2>; |
| 135 |
pinctrl-0 = <&pmic_int_l>; |
| 136 |
pinctrl-names = "default"; |
| 137 |
system-power-controller; |
| 138 |
wakeup-source; |
| 139 |
|
| 140 |
vcc1-supply = <&vcc_sys>; |
| 141 |
vcc2-supply = <&vcc_sys>; |
| 142 |
vcc3-supply = <&vcc_sys>; |
| 143 |
vcc4-supply = <&vcc_sys>; |
| 144 |
vcc5-supply = <&vcc_io>; |
| 145 |
vcc6-supply = <&vcc_sys>; |
| 146 |
|
| 147 |
regulators { |
| 148 |
vdd_log: DCDC_REG1 { |
| 149 |
regulator-name = "vdd_log"; |
| 150 |
regulator-always-on; |
| 151 |
regulator-boot-on; |
| 152 |
regulator-min-microvolt = <712500>; |
| 153 |
regulator-max-microvolt = <1450000>; |
| 154 |
regulator-ramp-delay = <12500>; |
| 155 |
|
| 156 |
regulator-state-mem { |
| 157 |
regulator-on-in-suspend; |
| 158 |
regulator-suspend-microvolt = <1000000>; |
| 159 |
}; |
| 160 |
}; |
| 161 |
|
| 162 |
vdd_arm: DCDC_REG2 { |
| 163 |
regulator-name = "vdd_arm"; |
| 164 |
regulator-always-on; |
| 165 |
regulator-boot-on; |
| 166 |
regulator-min-microvolt = <712500>; |
| 167 |
regulator-max-microvolt = <1450000>; |
| 168 |
regulator-ramp-delay = <12500>; |
| 169 |
|
| 170 |
regulator-state-mem { |
| 171 |
regulator-on-in-suspend; |
| 172 |
regulator-suspend-microvolt = <950000>; |
| 173 |
}; |
| 174 |
}; |
| 175 |
|
| 176 |
vcc_ddr: DCDC_REG3 { |
| 177 |
regulator-name = "vcc_ddr"; |
| 178 |
regulator-always-on; |
| 179 |
regulator-boot-on; |
| 180 |
|
| 181 |
regulator-state-mem { |
| 182 |
regulator-on-in-suspend; |
| 183 |
}; |
| 184 |
}; |
| 185 |
|
| 186 |
vcc_io: DCDC_REG4 { |
| 187 |
regulator-name = "vcc_io"; |
| 188 |
regulator-always-on; |
| 189 |
regulator-boot-on; |
| 190 |
regulator-min-microvolt = <3300000>; |
| 191 |
regulator-max-microvolt = <3300000>; |
| 192 |
|
| 193 |
regulator-state-mem { |
| 194 |
regulator-on-in-suspend; |
| 195 |
regulator-suspend-microvolt = <3300000>; |
| 196 |
}; |
| 197 |
}; |
| 198 |
|
| 199 |
vcc_18: LDO_REG1 { |
| 200 |
regulator-name = "vcc_18"; |
| 201 |
regulator-always-on; |
| 202 |
regulator-boot-on; |
| 203 |
regulator-min-microvolt = <1800000>; |
| 204 |
regulator-max-microvolt = <1800000>; |
| 205 |
|
| 206 |
regulator-state-mem { |
| 207 |
regulator-on-in-suspend; |
| 208 |
regulator-suspend-microvolt = <1800000>; |
| 209 |
}; |
| 210 |
}; |
| 211 |
|
| 212 |
vcc18_emmc: LDO_REG2 { |
| 213 |
regulator-name = "vcc18_emmc"; |
| 214 |
regulator-always-on; |
| 215 |
regulator-boot-on; |
| 216 |
regulator-min-microvolt = <1800000>; |
| 217 |
regulator-max-microvolt = <1800000>; |
| 218 |
|
| 219 |
regulator-state-mem { |
| 220 |
regulator-on-in-suspend; |
| 221 |
regulator-suspend-microvolt = <1800000>; |
| 222 |
}; |
| 223 |
}; |
| 224 |
|
| 225 |
vdd_10: LDO_REG3 { |
| 226 |
regulator-name = "vdd_10"; |
| 227 |
regulator-always-on; |
| 228 |
regulator-boot-on; |
| 229 |
regulator-min-microvolt = <1000000>; |
| 230 |
regulator-max-microvolt = <1000000>; |
| 231 |
|
| 232 |
regulator-state-mem { |
| 233 |
regulator-on-in-suspend; |
| 234 |
regulator-suspend-microvolt = <1000000>; |
| 235 |
}; |
| 236 |
}; |
| 237 |
}; |
| 238 |
}; |
| 239 |
}; |
| 240 |
|
| 241 |
&io_domains { |
| 242 |
pmuio-supply = <&vcc_io>; |
| 243 |
vccio1-supply = <&vcc_io>; |
| 244 |
vccio2-supply = <&vcc18_emmc>; |
| 245 |
vccio3-supply = <&vcc_io>; |
| 246 |
vccio4-supply = <&vcc_io>; |
| 247 |
vccio5-supply = <&vcc_io>; |
| 248 |
vccio6-supply = <&vcc_io>; |
| 249 |
status = "okay"; |
| 250 |
}; |
| 251 |
|
| 252 |
&pinctrl { |
| 253 |
gmac2io { |
| 254 |
eth_phy_reset_pin: eth-phy-reset-pin { |
| 255 |
rockchip,pins = <1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_down>; |
| 256 |
}; |
| 257 |
}; |
| 258 |
|
| 259 |
leds { |
| 260 |
lan_led_pin: lan-led-pin { |
| 261 |
rockchip,pins = <2 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>; |
| 262 |
}; |
| 263 |
|
| 264 |
sys_led_pin: sys-led-pin { |
| 265 |
rockchip,pins = <3 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>; |
| 266 |
}; |
| 267 |
|
| 268 |
wan_led_pin: wan-led-pin { |
| 269 |
rockchip,pins = <2 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>; |
| 270 |
}; |
| 271 |
}; |
| 272 |
|
| 273 |
lan { |
| 274 |
lan_vdd_pin: lan-vdd-pin { |
| 275 |
rockchip,pins = <2 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>; |
| 276 |
}; |
| 277 |
}; |
| 278 |
|
| 279 |
pmic { |
| 280 |
pmic_int_l: pmic-int-l { |
| 281 |
rockchip,pins = <1 RK_PD0 RK_FUNC_GPIO &pcfg_pull_up>; |
| 282 |
}; |
| 283 |
}; |
| 284 |
}; |
| 285 |
|
| 286 |
&pwm2 { |
| 287 |
status = "okay"; |
| 288 |
}; |
| 289 |
|
| 290 |
&sdmmc { |
| 291 |
bus-width = <4>; |
| 292 |
cap-sd-highspeed; |
| 293 |
disable-wp; |
| 294 |
pinctrl-0 = <&sdmmc0_clk>, <&sdmmc0_cmd>, <&sdmmc0_dectn>, <&sdmmc0_bus4>; |
| 295 |
pinctrl-names = "default"; |
| 296 |
vmmc-supply = <&vcc_sd>; |
| 297 |
status = "okay"; |
| 298 |
}; |
| 299 |
|
| 300 |
&spi0 { |
| 301 |
status = "okay"; |
| 302 |
|
| 303 |
flash@0 { |
| 304 |
compatible = "jedec,spi-nor"; |
| 305 |
reg = <0>; |
| 306 |
spi-max-frequency = <50000000>; |
| 307 |
}; |
| 308 |
}; |
| 309 |
|
| 310 |
&tsadc { |
| 311 |
rockchip,hw-tshut-mode = <0>; |
| 312 |
rockchip,hw-tshut-polarity = <0>; |
| 313 |
status = "okay"; |
| 314 |
}; |
| 315 |
|
| 316 |
&u2phy { |
| 317 |
status = "okay"; |
| 318 |
}; |
| 319 |
|
| 320 |
&u2phy_host { |
| 321 |
status = "okay"; |
| 322 |
}; |
| 323 |
|
| 324 |
&u2phy_otg { |
| 325 |
status = "okay"; |
| 326 |
}; |
| 327 |
|
| 328 |
&uart2 { |
| 329 |
status = "okay"; |
| 330 |
}; |
| 331 |
|
| 332 |
&usb20_otg { |
| 333 |
dr_mode = "host"; |
| 334 |
status = "okay"; |
| 335 |
}; |
| 336 |
|
| 337 |
&usbdrd3 { |
| 338 |
dr_mode = "host"; |
| 339 |
status = "okay"; |
| 340 |
#address-cells = <1>; |
| 341 |
#size-cells = <0>; |
| 342 |
|
| 343 |
/* Second port is for USB 3.0 */ |
| 344 |
rtl8153: device@2 { |
| 345 |
compatible = "usbbda,8153"; |
| 346 |
reg = <2>; |
| 347 |
}; |
| 348 |
}; |
| 349 |
|
| 350 |
&usb_host0_ehci { |
| 351 |
status = "okay"; |
| 352 |
}; |
| 353 |
|
| 354 |
&usb_host0_ohci { |
| 355 |
status = "okay"; |
| 356 |
}; |