Debian Codegraph @

scripts/dtc/include-prefixes/arm64/rockchip/rk3328-nanopi-r2.dtsi

raw
1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
2 /*
3 * Copyright (c) 2020 David Bauer <[email protected]>
4 */
5
6 /dts-v1/;
7
8 #include <dt-bindings/input/input.h>
9 #include <dt-bindings/gpio/gpio.h>
10 #include "rk3328.dtsi"
11
12 / {
13 aliases {
14 ethernet0 = &gmac2io;
15 ethernet1 = &rtl8153;
16 mmc0 = &sdmmc;
17 };
18
19 chosen {
20 stdout-path = "serial2:1500000n8";
21 };
22
23 gmac_clk: gmac-clock {
24 compatible = "fixed-clock";
25 clock-frequency = <125000000>;
26 clock-output-names = "gmac_clkin";
27 #clock-cells = <0>;
28 };
29
30 keys {
31 compatible = "gpio-keys";
32 pinctrl-0 = <&reset_button_pin>;
33 pinctrl-names = "default";
34
35 key-reset {
36 label = "reset";
37 gpios = <&gpio0 RK_PA0 GPIO_ACTIVE_LOW>;
38 linux,code = <KEY_RESTART>;
39 debounce-interval = <50>;
40 };
41 };
42
43 leds {
44 compatible = "gpio-leds";
45 pinctrl-0 = <&lan_led_pin>, <&sys_led_pin>, <&wan_led_pin>;
46 pinctrl-names = "default";
47
48 lan_led: led-0 {
49 gpios = <&gpio2 RK_PB7 GPIO_ACTIVE_HIGH>;
50 label = "nanopi-r2s:green:lan";
51 };
52
53 sys_led: led-1 {
54 gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_HIGH>;
55 label = "nanopi-r2s:red:sys";
56 default-state = "on";
57 };
58
59 wan_led: led-2 {
60 gpios = <&gpio2 RK_PC2 GPIO_ACTIVE_HIGH>;
61 label = "nanopi-r2s:green:wan";
62 };
63 };
64
65 vcc_io_sdio: regulator-sdmmcio {
66 compatible = "regulator-gpio";
67 enable-active-high;
68 gpios = <&gpio1 RK_PD4 GPIO_ACTIVE_HIGH>;
69 pinctrl-0 = <&sdio_vcc_pin>;
70 pinctrl-names = "default";
71 regulator-name = "vcc_io_sdio";
72 regulator-always-on;
73 regulator-min-microvolt = <1800000>;
74 regulator-max-microvolt = <3300000>;
75 regulator-settling-time-us = <5000>;
76 regulator-type = "voltage";
77 startup-delay-us = <2000>;
78 states = <1800000 0x1>,
79 <3300000 0x0>;
80 vin-supply = <&vcc_io_33>;
81 };
82
83 vcc_sd: regulator-sdmmc {
84 compatible = "regulator-fixed";
85 gpio = <&gpio0 RK_PD6 GPIO_ACTIVE_LOW>;
86 pinctrl-0 = <&sdmmc0m1_pin>;
87 pinctrl-names = "default";
88 regulator-name = "vcc_sd";
89 regulator-boot-on;
90 regulator-min-microvolt = <3300000>;
91 regulator-max-microvolt = <3300000>;
92 vin-supply = <&vcc_io_33>;
93 };
94
95 vdd_5v: regulator-vdd-5v {
96 compatible = "regulator-fixed";
97 regulator-name = "vdd_5v";
98 regulator-always-on;
99 regulator-boot-on;
100 regulator-min-microvolt = <5000000>;
101 regulator-max-microvolt = <5000000>;
102 };
103
104 vdd_5v_lan: regulator-vdd-5v-lan {
105 compatible = "regulator-fixed";
106 enable-active-high;
107 gpio = <&gpio2 RK_PC6 GPIO_ACTIVE_HIGH>;
108 pinctrl-0 = <&lan_vdd_pin>;
109 pinctrl-names = "default";
110 regulator-name = "vdd_5v_lan";
111 regulator-always-on;
112 regulator-boot-on;
113 vin-supply = <&vdd_5v>;
114 };
115 };
116
117 &cpu0 {
118 cpu-supply = <&vdd_arm>;
119 };
120
121 &cpu1 {
122 cpu-supply = <&vdd_arm>;
123 };
124
125 &cpu2 {
126 cpu-supply = <&vdd_arm>;
127 };
128
129 &cpu3 {
130 cpu-supply = <&vdd_arm>;
131 };
132
133 &display_subsystem {
134 status = "disabled";
135 };
136
137 &gmac2io {
138 assigned-clocks = <&cru SCLK_MAC2IO>, <&cru SCLK_MAC2IO_EXT>;
139 assigned-clock-parents = <&gmac_clk>, <&gmac_clk>;
140 clock_in_out = "input";
141 phy-mode = "rgmii";
142 phy-supply = <&vcc_io_33>;
143 pinctrl-0 = <&rgmiim1_pins>;
144 pinctrl-names = "default";
145
146 mdio {
147 compatible = "snps,dwmac-mdio";
148 #address-cells = <1>;
149 #size-cells = <0>;
150 };
151 };
152
153 &i2c1 {
154 status = "okay";
155
156 rk805: pmic@18 {
157 compatible = "rockchip,rk805";
158 reg = <0x18>;
159 interrupt-parent = <&gpio1>;
160 interrupts = <24 IRQ_TYPE_LEVEL_LOW>;
161 #clock-cells = <1>;
162 clock-output-names = "xin32k", "rk805-clkout2";
163 gpio-controller;
164 #gpio-cells = <2>;
165 pinctrl-0 = <&pmic_int_l>;
166 pinctrl-names = "default";
167 system-power-controller;
168 wakeup-source;
169
170 vcc1-supply = <&vdd_5v>;
171 vcc2-supply = <&vdd_5v>;
172 vcc3-supply = <&vdd_5v>;
173 vcc4-supply = <&vdd_5v>;
174 vcc5-supply = <&vcc_io_33>;
175 vcc6-supply = <&vdd_5v>;
176
177 regulators {
178 vdd_log: DCDC_REG1 {
179 regulator-name = "vdd_log";
180 regulator-always-on;
181 regulator-boot-on;
182 regulator-min-microvolt = <712500>;
183 regulator-max-microvolt = <1450000>;
184 regulator-ramp-delay = <12500>;
185
186 regulator-state-mem {
187 regulator-on-in-suspend;
188 regulator-suspend-microvolt = <1000000>;
189 };
190 };
191
192 vdd_arm: DCDC_REG2 {
193 regulator-name = "vdd_arm";
194 regulator-always-on;
195 regulator-boot-on;
196 regulator-min-microvolt = <712500>;
197 regulator-max-microvolt = <1450000>;
198 regulator-ramp-delay = <12500>;
199
200 regulator-state-mem {
201 regulator-on-in-suspend;
202 regulator-suspend-microvolt = <950000>;
203 };
204 };
205
206 vcc_ddr: DCDC_REG3 {
207 regulator-name = "vcc_ddr";
208 regulator-always-on;
209 regulator-boot-on;
210
211 regulator-state-mem {
212 regulator-on-in-suspend;
213 };
214 };
215
216 vcc_io_33: DCDC_REG4 {
217 regulator-name = "vcc_io_33";
218 regulator-always-on;
219 regulator-boot-on;
220 regulator-min-microvolt = <3300000>;
221 regulator-max-microvolt = <3300000>;
222
223 regulator-state-mem {
224 regulator-on-in-suspend;
225 regulator-suspend-microvolt = <3300000>;
226 };
227 };
228
229 vcc_18: LDO_REG1 {
230 regulator-name = "vcc_18";
231 regulator-always-on;
232 regulator-boot-on;
233 regulator-min-microvolt = <1800000>;
234 regulator-max-microvolt = <1800000>;
235
236 regulator-state-mem {
237 regulator-on-in-suspend;
238 regulator-suspend-microvolt = <1800000>;
239 };
240 };
241
242 vcc18_emmc: LDO_REG2 {
243 regulator-name = "vcc18_emmc";
244 regulator-always-on;
245 regulator-boot-on;
246 regulator-min-microvolt = <1800000>;
247 regulator-max-microvolt = <1800000>;
248
249 regulator-state-mem {
250 regulator-on-in-suspend;
251 regulator-suspend-microvolt = <1800000>;
252 };
253 };
254
255 vdd_10: LDO_REG3 {
256 regulator-name = "vdd_10";
257 regulator-always-on;
258 regulator-boot-on;
259 regulator-min-microvolt = <1000000>;
260 regulator-max-microvolt = <1000000>;
261
262 regulator-state-mem {
263 regulator-on-in-suspend;
264 regulator-suspend-microvolt = <1000000>;
265 };
266 };
267 };
268 };
269 };
270
271 &io_domains {
272 pmuio-supply = <&vcc_io_33>;
273 vccio1-supply = <&vcc_io_33>;
274 vccio2-supply = <&vcc18_emmc>;
275 vccio3-supply = <&vcc_io_sdio>;
276 vccio4-supply = <&vcc_18>;
277 vccio5-supply = <&vcc_io_33>;
278 vccio6-supply = <&vcc_io_33>;
279 status = "okay";
280 };
281
282 &pinctrl {
283 button {
284 reset_button_pin: reset-button-pin {
285 rockchip,pins = <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>;
286 };
287 };
288
289 gmac2io {
290 eth_phy_reset_pin: eth-phy-reset-pin {
291 rockchip,pins = <1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_down>;
292 };
293 };
294
295 leds {
296 lan_led_pin: lan-led-pin {
297 rockchip,pins = <2 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>;
298 };
299
300 sys_led_pin: sys-led-pin {
301 rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
302 };
303
304 wan_led_pin: wan-led-pin {
305 rockchip,pins = <2 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>;
306 };
307 };
308
309 lan {
310 lan_vdd_pin: lan-vdd-pin {
311 rockchip,pins = <2 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;
312 };
313 };
314
315 pmic {
316 pmic_int_l: pmic-int-l {
317 rockchip,pins = <1 RK_PD0 RK_FUNC_GPIO &pcfg_pull_up>;
318 };
319 };
320
321 sd {
322 sdio_vcc_pin: sdio-vcc-pin {
323 rockchip,pins = <1 RK_PD4 RK_FUNC_GPIO &pcfg_pull_up>;
324 };
325 };
326 };
327
328 &pwm2 {
329 status = "okay";
330 };
331
332 &sdmmc {
333 bus-width = <4>;
334 cap-sd-highspeed;
335 disable-wp;
336 pinctrl-0 = <&sdmmc0_clk>, <&sdmmc0_cmd>, <&sdmmc0_dectn>, <&sdmmc0_bus4>;
337 pinctrl-names = "default";
338 sd-uhs-sdr12;
339 sd-uhs-sdr25;
340 sd-uhs-sdr50;
341 sd-uhs-sdr104;
342 vmmc-supply = <&vcc_sd>;
343 vqmmc-supply = <&vcc_io_sdio>;
344 status = "okay";
345 };
346
347 &tsadc {
348 rockchip,hw-tshut-mode = <0>;
349 rockchip,hw-tshut-polarity = <0>;
350 status = "okay";
351 };
352
353 &u2phy {
354 status = "okay";
355 };
356
357 &u2phy_host {
358 status = "okay";
359 };
360
361 &u2phy_otg {
362 status = "okay";
363 };
364
365 &uart2 {
366 status = "okay";
367 };
368
369 &usb20_otg {
370 status = "okay";
371 dr_mode = "host";
372 };
373
374 &usbdrd3 {
375 dr_mode = "host";
376 status = "okay";
377 #address-cells = <1>;
378 #size-cells = <0>;
379
380 /* Second port is for USB 3.0 */
381 rtl8153: device@2 {
382 compatible = "usbbda,8153";
383 reg = <2>;
384 };
385 };
386
387 &usb_host0_ehci {
388 status = "okay";
389 };
390
391 &usb_host0_ohci {
392 status = "okay";
393 };