| 1 |
// SPDX-License-Identifier: (GPL-2.0+ OR MIT) |
| 2 |
/* |
| 3 |
* Copyright (c) 2017 Fuzhou Rockchip Electronics Co., Ltd |
| 4 |
*/ |
| 5 |
|
| 6 |
/dts-v1/; |
| 7 |
#include "rk3328.dtsi" |
| 8 |
|
| 9 |
/ { |
| 10 |
model = "Rockchip RK3328 EVB"; |
| 11 |
compatible = "rockchip,rk3328-evb", "rockchip,rk3328"; |
| 12 |
|
| 13 |
aliases { |
| 14 |
ethernet0 = &gmac2phy; |
| 15 |
mmc0 = &sdmmc; |
| 16 |
mmc1 = &sdio; |
| 17 |
mmc2 = &emmc; |
| 18 |
}; |
| 19 |
|
| 20 |
chosen { |
| 21 |
stdout-path = "serial2:1500000n8"; |
| 22 |
}; |
| 23 |
|
| 24 |
dc_12v: regulator-dc-12v { |
| 25 |
compatible = "regulator-fixed"; |
| 26 |
regulator-name = "dc_12v"; |
| 27 |
regulator-always-on; |
| 28 |
regulator-boot-on; |
| 29 |
regulator-min-microvolt = <12000000>; |
| 30 |
regulator-max-microvolt = <12000000>; |
| 31 |
}; |
| 32 |
|
| 33 |
sdio_pwrseq: sdio-pwrseq { |
| 34 |
compatible = "mmc-pwrseq-simple"; |
| 35 |
pinctrl-names = "default"; |
| 36 |
pinctrl-0 = <&wifi_enable_h>; |
| 37 |
|
| 38 |
/* |
| 39 |
* On the module itself this is one of these (depending |
| 40 |
* on the actual card populated): |
| 41 |
* - SDIO_RESET_L_WL_REG_ON |
| 42 |
* - PDN (power down when low) |
| 43 |
*/ |
| 44 |
reset-gpios = <&gpio1 18 GPIO_ACTIVE_LOW>; |
| 45 |
}; |
| 46 |
|
| 47 |
vcc_sd: regulator-sdmmc { |
| 48 |
compatible = "regulator-fixed"; |
| 49 |
gpio = <&gpio0 30 GPIO_ACTIVE_LOW>; |
| 50 |
pinctrl-names = "default"; |
| 51 |
pinctrl-0 = <&sdmmc0m1_pin>; |
| 52 |
regulator-name = "vcc_sd"; |
| 53 |
regulator-min-microvolt = <3300000>; |
| 54 |
regulator-max-microvolt = <3300000>; |
| 55 |
vin-supply = <&vcc_io>; |
| 56 |
}; |
| 57 |
|
| 58 |
vcc_sys: regulator-vcc-sys { |
| 59 |
compatible = "regulator-fixed"; |
| 60 |
regulator-name = "vcc_sys"; |
| 61 |
regulator-always-on; |
| 62 |
regulator-boot-on; |
| 63 |
regulator-min-microvolt = <5000000>; |
| 64 |
regulator-max-microvolt = <5000000>; |
| 65 |
vin-supply = <&dc_12v>; |
| 66 |
}; |
| 67 |
|
| 68 |
vcc_phy: regulator-vcc-phy { |
| 69 |
compatible = "regulator-fixed"; |
| 70 |
regulator-name = "vcc_phy"; |
| 71 |
regulator-always-on; |
| 72 |
regulator-boot-on; |
| 73 |
}; |
| 74 |
}; |
| 75 |
|
| 76 |
&cpu0 { |
| 77 |
cpu-supply = <&vdd_arm>; |
| 78 |
}; |
| 79 |
|
| 80 |
&cpu1 { |
| 81 |
cpu-supply = <&vdd_arm>; |
| 82 |
}; |
| 83 |
|
| 84 |
&cpu2 { |
| 85 |
cpu-supply = <&vdd_arm>; |
| 86 |
}; |
| 87 |
|
| 88 |
&cpu3 { |
| 89 |
cpu-supply = <&vdd_arm>; |
| 90 |
}; |
| 91 |
|
| 92 |
&emmc { |
| 93 |
bus-width = <8>; |
| 94 |
cap-mmc-highspeed; |
| 95 |
non-removable; |
| 96 |
pinctrl-names = "default"; |
| 97 |
pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus8>; |
| 98 |
status = "okay"; |
| 99 |
}; |
| 100 |
|
| 101 |
&gmac2phy { |
| 102 |
phy-supply = <&vcc_phy>; |
| 103 |
clock_in_out = "output"; |
| 104 |
assigned-clock-rates = <50000000>; |
| 105 |
assigned-clocks = <&cru SCLK_MAC2PHY>; |
| 106 |
assigned-clock-parents = <&cru SCLK_MAC2PHY_SRC>; |
| 107 |
status = "okay"; |
| 108 |
}; |
| 109 |
|
| 110 |
&i2c1 { |
| 111 |
status = "okay"; |
| 112 |
|
| 113 |
rk805: pmic@18 { |
| 114 |
compatible = "rockchip,rk805"; |
| 115 |
reg = <0x18>; |
| 116 |
interrupt-parent = <&gpio2>; |
| 117 |
interrupts = <6 IRQ_TYPE_LEVEL_LOW>; |
| 118 |
#clock-cells = <1>; |
| 119 |
clock-output-names = "xin32k", "rk805-clkout2"; |
| 120 |
gpio-controller; |
| 121 |
#gpio-cells = <2>; |
| 122 |
pinctrl-names = "default"; |
| 123 |
pinctrl-0 = <&pmic_int_l>; |
| 124 |
system-power-controller; |
| 125 |
wakeup-source; |
| 126 |
|
| 127 |
vcc1-supply = <&vcc_sys>; |
| 128 |
vcc2-supply = <&vcc_sys>; |
| 129 |
vcc3-supply = <&vcc_sys>; |
| 130 |
vcc4-supply = <&vcc_sys>; |
| 131 |
vcc5-supply = <&vcc_io>; |
| 132 |
vcc6-supply = <&vcc_io>; |
| 133 |
|
| 134 |
regulators { |
| 135 |
vdd_logic: DCDC_REG1 { |
| 136 |
regulator-name = "vdd_logic"; |
| 137 |
regulator-min-microvolt = <712500>; |
| 138 |
regulator-max-microvolt = <1450000>; |
| 139 |
regulator-always-on; |
| 140 |
regulator-boot-on; |
| 141 |
regulator-state-mem { |
| 142 |
regulator-on-in-suspend; |
| 143 |
regulator-suspend-microvolt = <1000000>; |
| 144 |
}; |
| 145 |
}; |
| 146 |
|
| 147 |
vdd_arm: DCDC_REG2 { |
| 148 |
regulator-name = "vdd_arm"; |
| 149 |
regulator-min-microvolt = <712500>; |
| 150 |
regulator-max-microvolt = <1450000>; |
| 151 |
regulator-always-on; |
| 152 |
regulator-boot-on; |
| 153 |
regulator-state-mem { |
| 154 |
regulator-on-in-suspend; |
| 155 |
regulator-suspend-microvolt = <950000>; |
| 156 |
}; |
| 157 |
}; |
| 158 |
|
| 159 |
vcc_ddr: DCDC_REG3 { |
| 160 |
regulator-name = "vcc_ddr"; |
| 161 |
regulator-always-on; |
| 162 |
regulator-boot-on; |
| 163 |
regulator-state-mem { |
| 164 |
regulator-on-in-suspend; |
| 165 |
}; |
| 166 |
}; |
| 167 |
|
| 168 |
vcc_io: DCDC_REG4 { |
| 169 |
regulator-name = "vcc_io"; |
| 170 |
regulator-min-microvolt = <3300000>; |
| 171 |
regulator-max-microvolt = <3300000>; |
| 172 |
regulator-always-on; |
| 173 |
regulator-boot-on; |
| 174 |
regulator-state-mem { |
| 175 |
regulator-on-in-suspend; |
| 176 |
regulator-suspend-microvolt = <3300000>; |
| 177 |
}; |
| 178 |
}; |
| 179 |
|
| 180 |
vcc_18: LDO_REG1 { |
| 181 |
regulator-name = "vcc_18"; |
| 182 |
regulator-min-microvolt = <1800000>; |
| 183 |
regulator-max-microvolt = <1800000>; |
| 184 |
regulator-always-on; |
| 185 |
regulator-boot-on; |
| 186 |
regulator-state-mem { |
| 187 |
regulator-on-in-suspend; |
| 188 |
regulator-suspend-microvolt = <1800000>; |
| 189 |
}; |
| 190 |
}; |
| 191 |
|
| 192 |
vcc18_emmc: LDO_REG2 { |
| 193 |
regulator-name = "vcc18_emmc"; |
| 194 |
regulator-min-microvolt = <1800000>; |
| 195 |
regulator-max-microvolt = <1800000>; |
| 196 |
regulator-always-on; |
| 197 |
regulator-boot-on; |
| 198 |
regulator-state-mem { |
| 199 |
regulator-on-in-suspend; |
| 200 |
regulator-suspend-microvolt = <1800000>; |
| 201 |
}; |
| 202 |
}; |
| 203 |
|
| 204 |
vdd_10: LDO_REG3 { |
| 205 |
regulator-name = "vdd_10"; |
| 206 |
regulator-min-microvolt = <1000000>; |
| 207 |
regulator-max-microvolt = <1000000>; |
| 208 |
regulator-always-on; |
| 209 |
regulator-boot-on; |
| 210 |
regulator-state-mem { |
| 211 |
regulator-on-in-suspend; |
| 212 |
regulator-suspend-microvolt = <1000000>; |
| 213 |
}; |
| 214 |
}; |
| 215 |
}; |
| 216 |
}; |
| 217 |
}; |
| 218 |
|
| 219 |
&pinctrl { |
| 220 |
pmic { |
| 221 |
pmic_int_l: pmic-int-l { |
| 222 |
rockchip,pins = <2 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>; |
| 223 |
}; |
| 224 |
}; |
| 225 |
|
| 226 |
sdio-pwrseq { |
| 227 |
wifi_enable_h: wifi-enable-h { |
| 228 |
rockchip,pins = |
| 229 |
<1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>; |
| 230 |
}; |
| 231 |
}; |
| 232 |
}; |
| 233 |
|
| 234 |
&sdio { |
| 235 |
bus-width = <4>; |
| 236 |
cap-sd-highspeed; |
| 237 |
cap-sdio-irq; |
| 238 |
keep-power-in-suspend; |
| 239 |
max-frequency = <150000000>; |
| 240 |
mmc-pwrseq = <&sdio_pwrseq>; |
| 241 |
non-removable; |
| 242 |
pinctrl-names = "default"; |
| 243 |
pinctrl-0 = <&sdmmc1_bus4 &sdmmc1_cmd &sdmmc1_clk>; |
| 244 |
status = "okay"; |
| 245 |
}; |
| 246 |
|
| 247 |
&sdmmc { |
| 248 |
bus-width = <4>; |
| 249 |
cap-mmc-highspeed; |
| 250 |
cap-sd-highspeed; |
| 251 |
disable-wp; |
| 252 |
max-frequency = <150000000>; |
| 253 |
pinctrl-names = "default"; |
| 254 |
pinctrl-0 = <&sdmmc0_clk &sdmmc0_cmd &sdmmc0_dectn &sdmmc0_bus4>; |
| 255 |
vmmc-supply = <&vcc_sd>; |
| 256 |
status = "okay"; |
| 257 |
}; |
| 258 |
|
| 259 |
&tsadc { |
| 260 |
status = "okay"; |
| 261 |
}; |
| 262 |
|
| 263 |
&uart2 { |
| 264 |
status = "okay"; |
| 265 |
}; |
| 266 |
|
| 267 |
&u2phy { |
| 268 |
status = "okay"; |
| 269 |
}; |
| 270 |
|
| 271 |
&u2phy_host { |
| 272 |
status = "okay"; |
| 273 |
}; |
| 274 |
|
| 275 |
&u2phy_otg { |
| 276 |
status = "okay"; |
| 277 |
}; |
| 278 |
|
| 279 |
&usb20_otg { |
| 280 |
status = "okay"; |
| 281 |
}; |
| 282 |
|
| 283 |
&usb_host0_ehci { |
| 284 |
status = "okay"; |
| 285 |
}; |
| 286 |
|
| 287 |
&usb_host0_ohci { |
| 288 |
status = "okay"; |
| 289 |
}; |