| 1 |
// SPDX-License-Identifier: (GPL-2.0-only OR MIT) |
| 2 |
// Copyright (c) 2017-2019 Arm Ltd. |
| 3 |
|
| 4 |
/dts-v1/; |
| 5 |
#include "rk3328.dtsi" |
| 6 |
|
| 7 |
/ { |
| 8 |
model = "Beelink A1"; |
| 9 |
compatible = "azw,beelink-a1", "rockchip,rk3328"; |
| 10 |
|
| 11 |
aliases { |
| 12 |
ethernet0 = &gmac2io; |
| 13 |
mmc0 = &sdmmc; |
| 14 |
mmc1 = &emmc; |
| 15 |
}; |
| 16 |
|
| 17 |
/* |
| 18 |
* UART pins, as viewed with bottom of case removed: |
| 19 |
* |
| 20 |
* Front |
| 21 |
* /------- |
| 22 |
* L / o <- Gnd |
| 23 |
* e / o <-- Rx |
| 24 |
* f / o <--- Tx |
| 25 |
* t / o <---- +3.3v |
| 26 |
* | |
| 27 |
*/ |
| 28 |
chosen { |
| 29 |
stdout-path = "serial2:1500000n8"; |
| 30 |
}; |
| 31 |
|
| 32 |
gmac_clkin: external-gmac-clock { |
| 33 |
compatible = "fixed-clock"; |
| 34 |
clock-frequency = <125000000>; |
| 35 |
clock-output-names = "gmac_clkin"; |
| 36 |
#clock-cells = <0>; |
| 37 |
}; |
| 38 |
|
| 39 |
vcc_host_5v: regulator-usb3-current-switch { |
| 40 |
compatible = "regulator-fixed"; |
| 41 |
enable-active-high; |
| 42 |
gpio = <&gpio0 RK_PA0 GPIO_ACTIVE_HIGH>; |
| 43 |
pinctrl-names = "default"; |
| 44 |
pinctrl-0 = <&usb30_host_drv>; |
| 45 |
regulator-name = "vcc_host_5v"; |
| 46 |
vin-supply = <&vcc_sys>; |
| 47 |
}; |
| 48 |
|
| 49 |
vcc_sys: regulator-vcc-sys { |
| 50 |
compatible = "regulator-fixed"; |
| 51 |
regulator-name = "vcc_sys"; |
| 52 |
regulator-min-microvolt = <5000000>; |
| 53 |
regulator-max-microvolt = <5000000>; |
| 54 |
}; |
| 55 |
|
| 56 |
ir-receiver { |
| 57 |
compatible = "gpio-ir-receiver"; |
| 58 |
gpios = <&gpio2 RK_PA2 GPIO_ACTIVE_LOW>; |
| 59 |
linux,rc-map-name = "rc-beelink-gs1"; |
| 60 |
}; |
| 61 |
|
| 62 |
spdif_dit: spdif-dit { |
| 63 |
compatible = "linux,spdif-dit"; |
| 64 |
#sound-dai-cells = <0>; |
| 65 |
}; |
| 66 |
|
| 67 |
spdif_sound: spdif-sound { |
| 68 |
compatible = "simple-audio-card"; |
| 69 |
simple-audio-card,name = "SPDIF"; |
| 70 |
|
| 71 |
simple-audio-card,cpu { |
| 72 |
sound-dai = <&spdif>; |
| 73 |
}; |
| 74 |
|
| 75 |
simple-audio-card,codec { |
| 76 |
sound-dai = <&spdif_dit>; |
| 77 |
}; |
| 78 |
}; |
| 79 |
}; |
| 80 |
|
| 81 |
&analog_sound { |
| 82 |
simple-audio-card,name = "Analog A/V"; |
| 83 |
status = "okay"; |
| 84 |
}; |
| 85 |
|
| 86 |
&codec { |
| 87 |
mute-gpios = <&grf_gpio 0 GPIO_ACTIVE_LOW>; |
| 88 |
status = "okay"; |
| 89 |
}; |
| 90 |
|
| 91 |
&cpu0 { |
| 92 |
cpu-supply = <&vdd_arm>; |
| 93 |
}; |
| 94 |
|
| 95 |
&cpu1 { |
| 96 |
cpu-supply = <&vdd_arm>; |
| 97 |
}; |
| 98 |
|
| 99 |
&cpu2 { |
| 100 |
cpu-supply = <&vdd_arm>; |
| 101 |
}; |
| 102 |
|
| 103 |
&cpu3 { |
| 104 |
cpu-supply = <&vdd_arm>; |
| 105 |
}; |
| 106 |
|
| 107 |
&emmc { |
| 108 |
bus-width = <8>; |
| 109 |
cap-mmc-highspeed; |
| 110 |
mmc-ddr-1_8v; |
| 111 |
mmc-hs200-1_8v; |
| 112 |
no-sd; |
| 113 |
no-sdio; |
| 114 |
non-removable; |
| 115 |
pinctrl-names = "default"; |
| 116 |
pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus8>; |
| 117 |
vmmc-supply = <&vcc_io>; |
| 118 |
vqmmc-supply = <&vcc18_emmc>; |
| 119 |
status = "okay"; |
| 120 |
}; |
| 121 |
|
| 122 |
&gmac2io { |
| 123 |
assigned-clocks = <&cru SCLK_MAC2IO>, <&cru SCLK_MAC2IO_EXT>; |
| 124 |
assigned-clock-parents = <&gmac_clkin>, <&gmac_clkin>; |
| 125 |
clock_in_out = "input"; |
| 126 |
phy-handle = <&rtl8211f>; |
| 127 |
phy-mode = "rgmii"; |
| 128 |
phy-supply = <&vcc_io>; |
| 129 |
pinctrl-names = "default"; |
| 130 |
pinctrl-0 = <&rgmiim1_pins>; |
| 131 |
snps,pbl = <0x4>; |
| 132 |
tx_delay = <0x26>; |
| 133 |
rx_delay = <0x11>; |
| 134 |
status = "okay"; |
| 135 |
|
| 136 |
mdio { |
| 137 |
compatible = "snps,dwmac-mdio"; |
| 138 |
#address-cells = <1>; |
| 139 |
#size-cells = <0>; |
| 140 |
|
| 141 |
rtl8211f: ethernet-phy@0 { |
| 142 |
reg = <0>; |
| 143 |
reset-assert-us = <10000>; |
| 144 |
reset-deassert-us = <30000>; |
| 145 |
reset-gpios = <&gpio2 RK_PC1 GPIO_ACTIVE_LOW>; |
| 146 |
}; |
| 147 |
}; |
| 148 |
}; |
| 149 |
|
| 150 |
&gpu { |
| 151 |
mali-supply = <&vdd_logic>; |
| 152 |
}; |
| 153 |
|
| 154 |
&hdmi { |
| 155 |
status = "okay"; |
| 156 |
}; |
| 157 |
|
| 158 |
&hdmiphy { |
| 159 |
status = "okay"; |
| 160 |
}; |
| 161 |
|
| 162 |
&hdmi_sound { |
| 163 |
status = "okay"; |
| 164 |
}; |
| 165 |
|
| 166 |
&i2c1 { |
| 167 |
clock-frequency = <1000000>; |
| 168 |
i2c-scl-falling-time-ns = <5>; |
| 169 |
i2c-scl-rising-time-ns = <83>; |
| 170 |
status = "okay"; |
| 171 |
|
| 172 |
pmic@18 { |
| 173 |
compatible = "rockchip,rk805"; |
| 174 |
reg = <0x18>; |
| 175 |
interrupt-parent = <&gpio2>; |
| 176 |
interrupts = <RK_PA6 IRQ_TYPE_LEVEL_LOW>; |
| 177 |
pinctrl-names = "default"; |
| 178 |
pinctrl-0 = <&pmic_int_l>; |
| 179 |
system-power-controller; |
| 180 |
wakeup-source; |
| 181 |
#clock-cells = <0>; |
| 182 |
|
| 183 |
vcc1-supply = <&vcc_sys>; |
| 184 |
vcc2-supply = <&vcc_sys>; |
| 185 |
vcc3-supply = <&vcc_sys>; |
| 186 |
vcc4-supply = <&vcc_sys>; |
| 187 |
vcc5-supply = <&vcc_io>; |
| 188 |
vcc6-supply = <&vcc_io>; |
| 189 |
|
| 190 |
regulators { |
| 191 |
vdd_logic: DCDC_REG1 { |
| 192 |
regulator-name = "vdd_logic"; |
| 193 |
regulator-min-microvolt = <700000>; |
| 194 |
regulator-max-microvolt = <1350000>; |
| 195 |
regulator-always-on; |
| 196 |
regulator-boot-on; |
| 197 |
regulator-state-mem { |
| 198 |
regulator-on-in-suspend; |
| 199 |
regulator-suspend-microvolt = <1000000>; |
| 200 |
}; |
| 201 |
}; |
| 202 |
|
| 203 |
vdd_arm: DCDC_REG2 { |
| 204 |
regulator-name = "vdd_arm"; |
| 205 |
regulator-min-microvolt = <700000>; |
| 206 |
regulator-max-microvolt = <1350000>; |
| 207 |
regulator-always-on; |
| 208 |
regulator-boot-on; |
| 209 |
regulator-state-mem { |
| 210 |
regulator-on-in-suspend; |
| 211 |
regulator-suspend-microvolt = <950000>; |
| 212 |
}; |
| 213 |
}; |
| 214 |
|
| 215 |
vcc_ddr: DCDC_REG3 { |
| 216 |
regulator-name = "vcc_ddr"; |
| 217 |
regulator-always-on; |
| 218 |
regulator-boot-on; |
| 219 |
regulator-state-mem { |
| 220 |
regulator-on-in-suspend; |
| 221 |
}; |
| 222 |
}; |
| 223 |
|
| 224 |
vcc_io: DCDC_REG4 { |
| 225 |
regulator-name = "vcc_io"; |
| 226 |
regulator-min-microvolt = <3300000>; |
| 227 |
regulator-max-microvolt = <3300000>; |
| 228 |
regulator-always-on; |
| 229 |
regulator-boot-on; |
| 230 |
regulator-state-mem { |
| 231 |
regulator-on-in-suspend; |
| 232 |
regulator-suspend-microvolt = <3300000>; |
| 233 |
}; |
| 234 |
}; |
| 235 |
|
| 236 |
vdd_18: LDO_REG1 { |
| 237 |
regulator-name = "vdd_18"; |
| 238 |
regulator-min-microvolt = <1800000>; |
| 239 |
regulator-max-microvolt = <1800000>; |
| 240 |
regulator-always-on; |
| 241 |
regulator-boot-on; |
| 242 |
regulator-state-mem { |
| 243 |
regulator-on-in-suspend; |
| 244 |
regulator-suspend-microvolt = <1800000>; |
| 245 |
}; |
| 246 |
}; |
| 247 |
|
| 248 |
vcc18_emmc: LDO_REG2 { |
| 249 |
regulator-name = "vcc_18emmc"; |
| 250 |
regulator-min-microvolt = <1800000>; |
| 251 |
regulator-max-microvolt = <1800000>; |
| 252 |
regulator-always-on; |
| 253 |
regulator-boot-on; |
| 254 |
regulator-state-mem { |
| 255 |
regulator-on-in-suspend; |
| 256 |
regulator-suspend-microvolt = <1800000>; |
| 257 |
}; |
| 258 |
}; |
| 259 |
|
| 260 |
vdd_11: LDO_REG3 { |
| 261 |
regulator-name = "vdd_11"; |
| 262 |
regulator-min-microvolt = <1100000>; |
| 263 |
regulator-max-microvolt = <1100000>; |
| 264 |
regulator-always-on; |
| 265 |
regulator-boot-on; |
| 266 |
regulator-state-mem { |
| 267 |
regulator-on-in-suspend; |
| 268 |
regulator-suspend-microvolt = <1100000>; |
| 269 |
}; |
| 270 |
}; |
| 271 |
}; |
| 272 |
}; |
| 273 |
}; |
| 274 |
|
| 275 |
&i2s0 { |
| 276 |
status = "okay"; |
| 277 |
}; |
| 278 |
|
| 279 |
&i2s1 { |
| 280 |
status = "okay"; |
| 281 |
}; |
| 282 |
|
| 283 |
&io_domains { |
| 284 |
vccio1-supply = <&vcc_io>; |
| 285 |
vccio2-supply = <&vcc18_emmc>; |
| 286 |
vccio3-supply = <&vcc_io>; |
| 287 |
vccio4-supply = <&vdd_18>; |
| 288 |
vccio5-supply = <&vcc_io>; |
| 289 |
vccio6-supply = <&vdd_18>; |
| 290 |
pmuio-supply = <&vcc_io>; |
| 291 |
status = "okay"; |
| 292 |
}; |
| 293 |
|
| 294 |
&pinctrl { |
| 295 |
pmic { |
| 296 |
pmic_int_l: pmic-int-l { |
| 297 |
rockchip,pins = <2 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>; |
| 298 |
}; |
| 299 |
}; |
| 300 |
|
| 301 |
usb3 { |
| 302 |
usb30_host_drv: usb30-host-drv { |
| 303 |
rockchip,pins = <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>; |
| 304 |
}; |
| 305 |
}; |
| 306 |
|
| 307 |
wifi { |
| 308 |
bt_dis: bt-dis { |
| 309 |
rockchip,pins = <2 RK_PC5 RK_FUNC_GPIO &pcfg_output_low>; |
| 310 |
}; |
| 311 |
|
| 312 |
bt_wake_host: bt-wake-host { |
| 313 |
rockchip,pins = <2 RK_PC0 RK_FUNC_GPIO &pcfg_pull_up>; |
| 314 |
}; |
| 315 |
|
| 316 |
chip_en: chip-en { |
| 317 |
rockchip,pins = <2 RK_PC3 RK_FUNC_GPIO &pcfg_output_low>; |
| 318 |
}; |
| 319 |
|
| 320 |
host_wake_bt: host-wake-bt { |
| 321 |
rockchip,pins = <2 RK_PB7 RK_FUNC_GPIO &pcfg_output_high>; |
| 322 |
}; |
| 323 |
|
| 324 |
wl_dis: wl-dis { |
| 325 |
rockchip,pins = <3 RK_PB0 RK_FUNC_GPIO &pcfg_output_low>; |
| 326 |
}; |
| 327 |
|
| 328 |
wl_wake_host: wl-wake-host { |
| 329 |
rockchip,pins = <3 RK_PA1 RK_FUNC_GPIO &pcfg_pull_up>; |
| 330 |
}; |
| 331 |
}; |
| 332 |
}; |
| 333 |
|
| 334 |
&sdmmc { |
| 335 |
bus-width = <4>; |
| 336 |
cap-mmc-highspeed; |
| 337 |
cap-sd-highspeed; |
| 338 |
disable-wp; |
| 339 |
pinctrl-names = "default"; |
| 340 |
pinctrl-0 = <&sdmmc0_clk &sdmmc0_cmd &sdmmc0_dectn &sdmmc0_bus4>; |
| 341 |
vmmc-supply = <&vcc_io>; |
| 342 |
vqmmc-supply = <&vcc_io>; |
| 343 |
status = "okay"; |
| 344 |
}; |
| 345 |
|
| 346 |
&spdif { |
| 347 |
pinctrl-0 = <&spdifm0_tx>; |
| 348 |
status = "okay"; |
| 349 |
}; |
| 350 |
|
| 351 |
&tsadc { |
| 352 |
rockchip,hw-tshut-mode = <0>; |
| 353 |
rockchip,hw-tshut-polarity = <0>; |
| 354 |
status = "okay"; |
| 355 |
}; |
| 356 |
|
| 357 |
&uart2 { |
| 358 |
status = "okay"; |
| 359 |
}; |
| 360 |
|
| 361 |
&u2phy { |
| 362 |
status = "okay"; |
| 363 |
}; |
| 364 |
|
| 365 |
&u2phy_host { |
| 366 |
status = "okay"; |
| 367 |
}; |
| 368 |
|
| 369 |
&u2phy_otg { |
| 370 |
status = "okay"; |
| 371 |
}; |
| 372 |
|
| 373 |
&usb20_otg { |
| 374 |
dr_mode = "host"; |
| 375 |
status = "okay"; |
| 376 |
}; |
| 377 |
|
| 378 |
&usb_host0_ehci { |
| 379 |
pinctrl-names = "default"; |
| 380 |
pinctrl-0 = <&bt_dis &bt_wake_host &chip_en &host_wake_bt &wl_dis &wl_wake_host>; |
| 381 |
status = "okay"; |
| 382 |
}; |
| 383 |
|
| 384 |
&usbdrd3 { |
| 385 |
dr_mode = "host"; |
| 386 |
status = "okay"; |
| 387 |
}; |
| 388 |
|
| 389 |
&vop { |
| 390 |
status = "okay"; |
| 391 |
}; |
| 392 |
|
| 393 |
&vop_mmu { |
| 394 |
status = "okay"; |
| 395 |
}; |