Debian Codegraph @

scripts/dtc/include-prefixes/arm64/rockchip/rk3326-odroid-go.dtsi

raw
1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
2 /*
3 * Copyright (c) 2019 Hardkernel Co., Ltd
4 * Copyright (c) 2020 Theobroma Systems Design und Consulting GmbH
5 * Copyright (c) 2022 Maya Matuszczyk <[email protected]>
6 */
7
8 /dts-v1/;
9 #include <dt-bindings/gpio/gpio.h>
10 #include <dt-bindings/input/input.h>
11 #include <dt-bindings/leds/common.h>
12 #include <dt-bindings/pinctrl/rockchip.h>
13 #include "rk3326.dtsi"
14
15 / {
16 aliases {
17 mmc0 = &sdmmc;
18 };
19
20 chosen {
21 stdout-path = "serial2:115200n8";
22 };
23
24 backlight: backlight {
25 compatible = "pwm-backlight";
26 power-supply = <&vcc_bl>;
27 pwms = <&pwm1 0 25000 0>;
28 };
29
30 builtin_gamepad: gpio-keys {
31 compatible = "gpio-keys";
32 pinctrl-names = "default";
33 pinctrl-0 = <&btn_pins>;
34
35 button-sw1 {
36 gpios = <&gpio1 RK_PB4 GPIO_ACTIVE_LOW>;
37 label = "DPAD-UP";
38 linux,code = <BTN_DPAD_UP>;
39 };
40 button-sw2 {
41 gpios = <&gpio1 RK_PB5 GPIO_ACTIVE_LOW>;
42 label = "DPAD-DOWN";
43 linux,code = <BTN_DPAD_DOWN>;
44 };
45 button-sw3 {
46 gpios = <&gpio1 RK_PB6 GPIO_ACTIVE_LOW>;
47 label = "DPAD-LEFT";
48 linux,code = <BTN_DPAD_LEFT>;
49 };
50 button-sw4 {
51 gpios = <&gpio1 RK_PB7 GPIO_ACTIVE_LOW>;
52 label = "DPAD-RIGHT";
53 linux,code = <BTN_DPAD_RIGHT>;
54 };
55 button-sw5 {
56 gpios = <&gpio1 RK_PA2 GPIO_ACTIVE_LOW>;
57 label = "BTN-A";
58 linux,code = <BTN_EAST>;
59 };
60 button-sw6 {
61 gpios = <&gpio1 RK_PA5 GPIO_ACTIVE_LOW>;
62 label = "BTN-B";
63 linux,code = <BTN_SOUTH>;
64 };
65 button-sw7 {
66 gpios = <&gpio1 RK_PA6 GPIO_ACTIVE_LOW>;
67 label = "BTN-Y";
68 linux,code = <BTN_WEST>;
69 };
70 button-sw8 {
71 gpios = <&gpio1 RK_PA7 GPIO_ACTIVE_LOW>;
72 label = "BTN-X";
73 linux,code = <BTN_NORTH>;
74 };
75 btn_f1: button-sw9 {
76 gpios = <&gpio2 RK_PA0 GPIO_ACTIVE_LOW>;
77 label = "F1";
78 linux,code = <BTN_TRIGGER_HAPPY1>;
79 };
80 btn_f2: button-sw10 {
81 gpios = <&gpio2 RK_PA1 GPIO_ACTIVE_LOW>;
82 label = "F2";
83 linux,code = <BTN_TRIGGER_HAPPY2>;
84 };
85 btn_f3: button-sw11 {
86 gpios = <&gpio2 RK_PA2 GPIO_ACTIVE_LOW>;
87 label = "F3";
88 linux,code = <BTN_TRIGGER_HAPPY3>;
89 };
90 btn_f4: button-sw12 {
91 gpios = <&gpio2 RK_PA3 GPIO_ACTIVE_LOW>;
92 label = "F4";
93 linux,code = <BTN_TRIGGER_HAPPY4>;
94 };
95 btn_f5: button-sw13 {
96 gpios = <&gpio2 RK_PA4 GPIO_ACTIVE_LOW>;
97 label = "F5";
98 linux,code = <BTN_TRIGGER_HAPPY5>;
99 };
100 btn_f6: button-sw14 {
101 gpios = <&gpio2 RK_PA5 GPIO_ACTIVE_LOW>;
102 label = "F6";
103 linux,code = <BTN_TRIGGER_HAPPY6>;
104 };
105 button-sw15 {
106 gpios = <&gpio2 RK_PA6 GPIO_ACTIVE_LOW>;
107 label = "TOP-LEFT";
108 linux,code = <BTN_TL>;
109 };
110 button-sw16 {
111 gpios = <&gpio2 RK_PA7 GPIO_ACTIVE_LOW>;
112 label = "TOP-RIGHT";
113 linux,code = <BTN_TR>;
114 };
115 };
116
117 /* led-1 is wired directly to output of always-on regulator */
118
119 gpio_led: gpio-leds {
120 compatible = "gpio-leds";
121 pinctrl-names = "default";
122 pinctrl-0 = <&red_led_pin>;
123
124 red_led: led-3 {
125 color = <LED_COLOR_ID_RED>;
126 gpios = <&gpio0 RK_PB5 GPIO_ACTIVE_HIGH>;
127 function = LED_FUNCTION_CHARGING;
128 };
129 };
130
131 pwm_led: led-controller {
132 compatible = "pwm-leds";
133
134 blue_led: led-2 {
135 color = <LED_COLOR_ID_BLUE>;
136 function = LED_FUNCTION_STATUS;
137 linux,default-trigger = "heartbeat";
138 max-brightness = <255>;
139 pwms = <&pwm3 0 25000 0>;
140 };
141 };
142
143 rk817-sound {
144 compatible = "simple-audio-card";
145 simple-audio-card,name = "rk817_int";
146 simple-audio-card,format = "i2s";
147 simple-audio-card,hp-det-gpios = <&gpio2 RK_PC6 GPIO_ACTIVE_HIGH>;
148 simple-audio-card,mclk-fs = <256>;
149 simple-audio-card,widgets =
150 "Microphone", "Mic Jack",
151 "Headphone", "Headphones",
152 "Speaker", "Speaker";
153 simple-audio-card,routing =
154 "MICL", "Mic Jack",
155 "Headphones", "HPOL",
156 "Headphones", "HPOR",
157 "Speaker", "SPKO";
158
159 simple-audio-card,codec {
160 sound-dai = <&rk817>;
161 };
162
163 simple-audio-card,cpu {
164 sound-dai = <&i2s1_2ch>;
165 };
166 };
167
168 vccsys: regulator-vccsys {
169 compatible = "regulator-fixed";
170 regulator-name = "vcc3v8_sys";
171 regulator-always-on;
172 regulator-min-microvolt = <3800000>;
173 regulator-max-microvolt = <3800000>;
174 };
175
176 vcc_host: regulator-vcc-host {
177 compatible = "regulator-fixed";
178 regulator-name = "vcc_host";
179 regulator-min-microvolt = <5000000>;
180 regulator-max-microvolt = <5000000>;
181
182 gpio = <&gpio0 RK_PB7 GPIO_ACTIVE_HIGH>;
183 enable-active-high;
184 regulator-always-on;
185 regulator-boot-on;
186 vin-supply = <&usb_midu>;
187 };
188 };
189
190 &cpu0 {
191 cpu-supply = <&vdd_arm>;
192 };
193
194 &cpu1 {
195 cpu-supply = <&vdd_arm>;
196 };
197
198 &cpu2 {
199 cpu-supply = <&vdd_arm>;
200 };
201
202 &cpu3 {
203 cpu-supply = <&vdd_arm>;
204 };
205
206 &cru {
207 assigned-clocks = <&cru PLL_NPLL>,
208 <&cru ACLK_BUS_PRE>, <&cru ACLK_PERI_PRE>,
209 <&cru HCLK_BUS_PRE>, <&cru HCLK_PERI_PRE>,
210 <&cru PCLK_BUS_PRE>, <&cru SCLK_GPU>;
211
212 assigned-clock-rates = <1188000000>,
213 <200000000>, <200000000>,
214 <150000000>, <150000000>,
215 <100000000>, <200000000>;
216 };
217
218 &display_subsystem {
219 status = "okay";
220 };
221
222 &dsi {
223 #address-cells = <1>;
224 #size-cells = <0>;
225 status = "okay";
226
227 ports {
228 mipi_out: port@1 {
229 reg = <1>;
230
231 mipi_out_panel: endpoint {
232 remote-endpoint = <&mipi_in_panel>;
233 };
234 };
235 };
236
237 internal_display: panel@0 {
238 reg = <0>;
239 backlight = <&backlight>;
240 reset-gpios = <&gpio3 RK_PC0 GPIO_ACTIVE_LOW>;
241 rotation = <270>;
242
243 port {
244 mipi_in_panel: endpoint {
245 remote-endpoint = <&mipi_out_panel>;
246 };
247 };
248 };
249 };
250
251 &dsi_dphy {
252 status = "okay";
253 };
254
255 &gpu {
256 mali-supply = <&vdd_logic>;
257 status = "okay";
258 };
259
260 &i2c0 {
261 clock-frequency = <400000>;
262 i2c-scl-falling-time-ns = <16>;
263 i2c-scl-rising-time-ns = <280>;
264 status = "okay";
265
266 rk817: pmic@20 {
267 compatible = "rockchip,rk817";
268 reg = <0x20>;
269 interrupt-parent = <&gpio0>;
270 interrupts = <RK_PB2 IRQ_TYPE_LEVEL_LOW>;
271 clock-output-names = "rk808-clkout1", "xin32k";
272 clock-names = "mclk";
273 clocks = <&cru SCLK_I2S1_OUT>;
274 pinctrl-names = "default";
275 pinctrl-0 = <&pmic_int>, <&i2s1_2ch_mclk>;
276 wakeup-source;
277 #clock-cells = <1>;
278 #sound-dai-cells = <0>;
279
280 vcc1-supply = <&vccsys>;
281 vcc2-supply = <&vccsys>;
282 vcc3-supply = <&vccsys>;
283 vcc4-supply = <&vccsys>;
284 vcc5-supply = <&vccsys>;
285 vcc6-supply = <&vccsys>;
286 vcc7-supply = <&vccsys>;
287 vcc8-supply = <&vccsys>;
288
289 regulators {
290 vdd_logic: DCDC_REG1 {
291 regulator-name = "vdd_logic";
292 regulator-min-microvolt = <950000>;
293 regulator-max-microvolt = <1150000>;
294 regulator-ramp-delay = <6001>;
295 regulator-always-on;
296 regulator-boot-on;
297
298 regulator-state-mem {
299 regulator-on-in-suspend;
300 regulator-suspend-microvolt = <950000>;
301 };
302 };
303
304 vdd_arm: DCDC_REG2 {
305 regulator-name = "vdd_arm";
306 regulator-min-microvolt = <950000>;
307 regulator-max-microvolt = <1350000>;
308 regulator-ramp-delay = <6001>;
309 regulator-always-on;
310 regulator-boot-on;
311
312 regulator-state-mem {
313 regulator-off-in-suspend;
314 regulator-suspend-microvolt = <950000>;
315 };
316 };
317
318 vcc_ddr: DCDC_REG3 {
319 regulator-name = "vcc_ddr";
320 regulator-always-on;
321 regulator-boot-on;
322
323 regulator-state-mem {
324 regulator-on-in-suspend;
325 };
326 };
327
328 vcc_3v3: DCDC_REG4 {
329 regulator-name = "vcc_3v3";
330 regulator-min-microvolt = <3300000>;
331 regulator-max-microvolt = <3300000>;
332 regulator-always-on;
333 regulator-boot-on;
334
335 regulator-state-mem {
336 regulator-off-in-suspend;
337 regulator-suspend-microvolt = <3300000>;
338 };
339 };
340
341 vcc_1v8: LDO_REG2 {
342 regulator-name = "vcc_1v8";
343 regulator-min-microvolt = <1800000>;
344 regulator-max-microvolt = <1800000>;
345 regulator-always-on;
346 regulator-boot-on;
347
348 regulator-state-mem {
349 regulator-on-in-suspend;
350 regulator-suspend-microvolt = <1800000>;
351 };
352 };
353
354 vdd_1v0: LDO_REG3 {
355 regulator-name = "vdd_1v0";
356 regulator-min-microvolt = <1000000>;
357 regulator-max-microvolt = <1000000>;
358 regulator-always-on;
359 regulator-boot-on;
360
361 regulator-state-mem {
362 regulator-on-in-suspend;
363 regulator-suspend-microvolt = <1000000>;
364 };
365 };
366
367 vcc3v3_pmu: LDO_REG4 {
368 regulator-name = "vcc3v3_pmu";
369 regulator-min-microvolt = <3300000>;
370 regulator-max-microvolt = <3300000>;
371 regulator-always-on;
372 regulator-boot-on;
373
374 regulator-state-mem {
375 regulator-on-in-suspend;
376 regulator-suspend-microvolt = <3300000>;
377 };
378 };
379
380 vccio_sd: LDO_REG5 {
381 regulator-name = "vccio_sd";
382 regulator-min-microvolt = <1800000>;
383 regulator-max-microvolt = <3300000>;
384 regulator-always-on;
385 regulator-boot-on;
386
387 regulator-state-mem {
388 regulator-on-in-suspend;
389 regulator-suspend-microvolt = <3300000>;
390 };
391 };
392
393 vcc_sd: LDO_REG6 {
394 regulator-name = "vcc_sd";
395 regulator-min-microvolt = <3300000>;
396 regulator-max-microvolt = <3300000>;
397 regulator-boot-on;
398
399 regulator-state-mem {
400 regulator-on-in-suspend;
401 regulator-suspend-microvolt = <3300000>;
402 };
403 };
404
405 vcc_bl: LDO_REG7 {
406 regulator-name = "vcc_bl";
407 regulator-min-microvolt = <3300000>;
408 regulator-max-microvolt = <3300000>;
409
410 regulator-state-mem {
411 regulator-off-in-suspend;
412 regulator-suspend-microvolt = <3300000>;
413 };
414 };
415
416 vcc_lcd: LDO_REG8 {
417 regulator-name = "vcc_lcd";
418 regulator-min-microvolt = <2800000>;
419 regulator-max-microvolt = <2800000>;
420
421 regulator-state-mem {
422 regulator-off-in-suspend;
423 regulator-suspend-microvolt = <2800000>;
424 };
425 };
426
427 LDO_REG9 {
428 /* unused */
429 };
430
431 usb_midu: BOOST {
432 regulator-name = "usb_midu";
433 regulator-min-microvolt = <5000000>;
434 regulator-max-microvolt = <5400000>;
435 regulator-always-on;
436 regulator-boot-on;
437 };
438 };
439
440 rk817_charger: charger {
441 rockchip,resistor-sense-micro-ohms = <10000>;
442 rockchip,sleep-enter-current-microamp = <300000>;
443 rockchip,sleep-filter-current-microamp = <100000>;
444 };
445
446 rk817_codec: codec {
447 rockchip,mic-in-differential;
448 };
449 };
450 };
451
452 /* EXT Header(P2): 7(SCL:GPIO0.C2), 8(SDA:GPIO0.C3) */
453 &i2c1 {
454 clock-frequency = <400000>;
455 status = "okay";
456 };
457
458 /* I2S 1 Channel Used */
459 &i2s1_2ch {
460 status = "okay";
461 };
462
463 &io_domains {
464 vccio1-supply = <&vcc_3v3>;
465 vccio2-supply = <&vccio_sd>;
466 vccio3-supply = <&vcc_3v3>;
467 vccio4-supply = <&vcc_3v3>;
468 vccio5-supply = <&vcc_3v3>;
469 vccio6-supply = <&vcc_3v3>;
470 status = "okay";
471 };
472
473 &pmu_io_domains {
474 pmuio1-supply = <&vcc3v3_pmu>;
475 pmuio2-supply = <&vcc3v3_pmu>;
476 status = "okay";
477 };
478
479 &pwm1 {
480 status = "okay";
481 };
482
483 &pwm3 {
484 status = "okay";
485 };
486
487 &saradc {
488 vref-supply = <&vcc_1v8>;
489 status = "okay";
490 };
491
492 &sdmmc {
493 cap-sd-highspeed;
494 card-detect-delay = <200>;
495 cd-gpios = <&gpio0 RK_PA3 GPIO_ACTIVE_LOW>; /*[> CD GPIO <]*/
496 sd-uhs-sdr12;
497 sd-uhs-sdr25;
498 sd-uhs-sdr50;
499 sd-uhs-sdr104;
500 vmmc-supply = <&vcc_sd>;
501 vqmmc-supply = <&vccio_sd>;
502 status = "okay";
503 };
504
505 &sfc {
506 pinctrl-0 = <&sfc_clk &sfc_cs0 &sfc_bus2>;
507 pinctrl-names = "default";
508 #address-cells = <1>;
509 #size-cells = <0>;
510 status = "okay";
511
512 flash@0 {
513 compatible = "jedec,spi-nor";
514 reg = <0>;
515 spi-max-frequency = <108000000>;
516 spi-rx-bus-width = <2>;
517 spi-tx-bus-width = <1>;
518 };
519 };
520
521 &tsadc {
522 status = "okay";
523 };
524
525 &u2phy {
526 status = "okay";
527
528 u2phy_host: host-port {
529 status = "okay";
530 };
531
532 u2phy_otg: otg-port {
533 status = "disabled";
534 };
535 };
536
537 &usb20_otg {
538 status = "okay";
539 };
540
541 /* EXT Header(P2): 2(RXD:GPIO1.C0),3(TXD:.C1),4(CTS:.C2),5(RTS:.C3) */
542 &uart1 {
543 pinctrl-names = "default";
544 pinctrl-0 = <&uart1_xfer &uart1_cts>;
545 status = "okay";
546 };
547
548 &uart2 {
549 pinctrl-names = "default";
550 pinctrl-0 = <&uart2m1_xfer>;
551 status = "okay";
552 };
553
554 &vopb {
555 status = "okay";
556 };
557
558 &vopb_mmu {
559 status = "okay";
560 };
561
562 &pinctrl {
563 btns {
564 btn_pins: btn-pins {
565 rockchip,pins = <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>,
566 <1 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>,
567 <1 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>,
568 <1 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up>,
569 <1 RK_PB4 RK_FUNC_GPIO &pcfg_pull_up>,
570 <1 RK_PB5 RK_FUNC_GPIO &pcfg_pull_up>,
571 <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_up>,
572 <1 RK_PB7 RK_FUNC_GPIO &pcfg_pull_up>,
573 <2 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up>,
574 <2 RK_PA1 RK_FUNC_GPIO &pcfg_pull_up>,
575 <2 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>,
576 <2 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>,
577 <2 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>,
578 <2 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>,
579 <2 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>,
580 <2 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up>;
581 };
582 };
583
584 headphone {
585 hp_det: hp-det {
586 rockchip,pins = <2 RK_PC6 RK_FUNC_GPIO &pcfg_pull_down>;
587 };
588 };
589
590 leds {
591 red_led_pin: red-led-pin {
592 rockchip,pins = <0 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
593 };
594 };
595
596 pmic {
597 dc_det: dc-det {
598 rockchip,pins = <0 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
599 };
600
601 pmic_int: pmic-int {
602 rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>;
603 };
604
605 soc_slppin_gpio: soc_slppin_gpio {
606 rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_output_low>;
607 };
608
609 soc_slppin_rst: soc_slppin_rst {
610 rockchip,pins = <0 RK_PA4 2 &pcfg_pull_none>;
611 };
612
613 soc_slppin_slp: soc_slppin_slp {
614 rockchip,pins = <0 RK_PA4 1 &pcfg_pull_none>;
615 };
616 };
617 };