| 1 |
// SPDX-License-Identifier: (GPL-2.0+ OR MIT) |
| 2 |
/* |
| 3 |
* Copyright (c) 2019 Hardkernel Co., Ltd |
| 4 |
* Copyright (c) 2020 Theobroma Systems Design und Consulting GmbH |
| 5 |
* Copyright (c) 2022 Maya Matuszczyk <[email protected]> |
| 6 |
*/ |
| 7 |
|
| 8 |
/dts-v1/; |
| 9 |
#include <dt-bindings/gpio/gpio.h> |
| 10 |
#include <dt-bindings/input/input.h> |
| 11 |
#include <dt-bindings/leds/common.h> |
| 12 |
#include <dt-bindings/pinctrl/rockchip.h> |
| 13 |
#include "rk3326.dtsi" |
| 14 |
|
| 15 |
/ { |
| 16 |
aliases { |
| 17 |
mmc0 = &sdmmc; |
| 18 |
}; |
| 19 |
|
| 20 |
chosen { |
| 21 |
stdout-path = "serial2:115200n8"; |
| 22 |
}; |
| 23 |
|
| 24 |
backlight: backlight { |
| 25 |
compatible = "pwm-backlight"; |
| 26 |
power-supply = <&vcc_bl>; |
| 27 |
pwms = <&pwm1 0 25000 0>; |
| 28 |
}; |
| 29 |
|
| 30 |
/* |
| 31 |
* LED is a tri-state. Driven high it is red, driven low it is |
| 32 |
* green, and not driven at all (pin set to input) it is amber. |
| 33 |
* Additionally, there is a 2nd LED that is not controllable |
| 34 |
* that is on (red) when plugged in to power. |
| 35 |
*/ |
| 36 |
gpio_led: gpio-leds { |
| 37 |
compatible = "gpio-leds"; |
| 38 |
pinctrl-names = "default"; |
| 39 |
pinctrl-0 = <&led_pin>; |
| 40 |
|
| 41 |
red_green_led: led-0 { |
| 42 |
color = <LED_COLOR_ID_RED>; |
| 43 |
gpios = <&gpio2 RK_PB5 GPIO_ACTIVE_HIGH>; |
| 44 |
function = LED_FUNCTION_CHARGING; |
| 45 |
}; |
| 46 |
}; |
| 47 |
|
| 48 |
rk817-sound { |
| 49 |
compatible = "simple-audio-card"; |
| 50 |
simple-audio-card,name = "rk817_int"; |
| 51 |
simple-audio-card,format = "i2s"; |
| 52 |
simple-audio-card,hp-det-gpios = <&gpio2 RK_PC6 GPIO_ACTIVE_HIGH>; |
| 53 |
simple-audio-card,mclk-fs = <256>; |
| 54 |
simple-audio-card,widgets = |
| 55 |
"Microphone", "Mic Jack", |
| 56 |
"Headphone", "Headphones", |
| 57 |
"Speaker", "Speaker"; |
| 58 |
simple-audio-card,routing = |
| 59 |
"MICL", "Mic Jack", |
| 60 |
"Headphones", "HPOL", |
| 61 |
"Headphones", "HPOR", |
| 62 |
"Speaker", "SPKO"; |
| 63 |
|
| 64 |
simple-audio-card,codec { |
| 65 |
sound-dai = <&rk817>; |
| 66 |
}; |
| 67 |
|
| 68 |
simple-audio-card,cpu { |
| 69 |
sound-dai = <&i2s1_2ch>; |
| 70 |
}; |
| 71 |
}; |
| 72 |
|
| 73 |
vccsys: regulator-vccsys { |
| 74 |
compatible = "regulator-fixed"; |
| 75 |
regulator-name = "vcc3v8_sys"; |
| 76 |
regulator-always-on; |
| 77 |
regulator-min-microvolt = <3800000>; |
| 78 |
regulator-max-microvolt = <3800000>; |
| 79 |
}; |
| 80 |
|
| 81 |
vibrator { |
| 82 |
compatible = "pwm-vibrator"; |
| 83 |
pwms = <&pwm0 0 1000000 0>; |
| 84 |
pwm-names = "enable"; |
| 85 |
}; |
| 86 |
}; |
| 87 |
|
| 88 |
&cpu0 { |
| 89 |
cpu-supply = <&vdd_arm>; |
| 90 |
}; |
| 91 |
|
| 92 |
&cpu1 { |
| 93 |
cpu-supply = <&vdd_arm>; |
| 94 |
}; |
| 95 |
|
| 96 |
&cpu2 { |
| 97 |
cpu-supply = <&vdd_arm>; |
| 98 |
}; |
| 99 |
|
| 100 |
&cpu3 { |
| 101 |
cpu-supply = <&vdd_arm>; |
| 102 |
}; |
| 103 |
|
| 104 |
&cru { |
| 105 |
assigned-clocks = <&cru PLL_NPLL>, |
| 106 |
<&cru ACLK_BUS_PRE>, <&cru ACLK_PERI_PRE>, |
| 107 |
<&cru HCLK_BUS_PRE>, <&cru HCLK_PERI_PRE>, |
| 108 |
<&cru PCLK_BUS_PRE>, <&cru SCLK_GPU>; |
| 109 |
|
| 110 |
assigned-clock-rates = <1188000000>, |
| 111 |
<200000000>, <200000000>, |
| 112 |
<150000000>, <150000000>, |
| 113 |
<100000000>, <200000000>; |
| 114 |
}; |
| 115 |
|
| 116 |
&display_subsystem { |
| 117 |
status = "okay"; |
| 118 |
}; |
| 119 |
|
| 120 |
&dsi { |
| 121 |
#address-cells = <1>; |
| 122 |
#size-cells = <0>; |
| 123 |
status = "okay"; |
| 124 |
|
| 125 |
ports { |
| 126 |
mipi_out: port@1 { |
| 127 |
reg = <1>; |
| 128 |
|
| 129 |
mipi_out_panel: endpoint { |
| 130 |
remote-endpoint = <&mipi_in_panel>; |
| 131 |
}; |
| 132 |
}; |
| 133 |
}; |
| 134 |
|
| 135 |
internal_display: panel@0 { |
| 136 |
reg = <0>; |
| 137 |
backlight = <&backlight>; |
| 138 |
reset-gpios = <&gpio3 RK_PC0 GPIO_ACTIVE_LOW>; |
| 139 |
|
| 140 |
port { |
| 141 |
mipi_in_panel: endpoint { |
| 142 |
remote-endpoint = <&mipi_out_panel>; |
| 143 |
}; |
| 144 |
}; |
| 145 |
}; |
| 146 |
}; |
| 147 |
|
| 148 |
&dsi_dphy { |
| 149 |
status = "okay"; |
| 150 |
}; |
| 151 |
|
| 152 |
&gpu { |
| 153 |
mali-supply = <&vdd_logic>; |
| 154 |
status = "okay"; |
| 155 |
}; |
| 156 |
|
| 157 |
&i2c0 { |
| 158 |
clock-frequency = <400000>; |
| 159 |
i2c-scl-falling-time-ns = <16>; |
| 160 |
i2c-scl-rising-time-ns = <280>; |
| 161 |
status = "okay"; |
| 162 |
|
| 163 |
rk817: pmic@20 { |
| 164 |
compatible = "rockchip,rk817"; |
| 165 |
reg = <0x20>; |
| 166 |
#clock-cells = <1>; |
| 167 |
clock-names = "mclk"; |
| 168 |
clock-output-names = "rk808-clkout1", "xin32k"; |
| 169 |
clocks = <&cru SCLK_I2S1_OUT>; |
| 170 |
interrupt-parent = <&gpio0>; |
| 171 |
interrupts = <RK_PB2 IRQ_TYPE_LEVEL_LOW>; |
| 172 |
pinctrl-0 = <&pmic_int>, <&i2s1_2ch_mclk>; |
| 173 |
pinctrl-names = "default"; |
| 174 |
#sound-dai-cells = <0>; |
| 175 |
wakeup-source; |
| 176 |
|
| 177 |
vcc1-supply = <&vccsys>; |
| 178 |
vcc2-supply = <&vccsys>; |
| 179 |
vcc3-supply = <&vccsys>; |
| 180 |
vcc4-supply = <&vccsys>; |
| 181 |
vcc5-supply = <&vccsys>; |
| 182 |
vcc6-supply = <&vccsys>; |
| 183 |
vcc7-supply = <&vccsys>; |
| 184 |
vcc8-supply = <&vccsys>; |
| 185 |
|
| 186 |
regulators { |
| 187 |
vdd_logic: DCDC_REG1 { |
| 188 |
regulator-always-on; |
| 189 |
regulator-boot-on; |
| 190 |
regulator-max-microvolt = <1150000>; |
| 191 |
regulator-min-microvolt = <950000>; |
| 192 |
regulator-name = "vdd_logic"; |
| 193 |
regulator-ramp-delay = <6001>; |
| 194 |
|
| 195 |
regulator-state-mem { |
| 196 |
regulator-on-in-suspend; |
| 197 |
regulator-suspend-microvolt = <950000>; |
| 198 |
}; |
| 199 |
}; |
| 200 |
|
| 201 |
vdd_arm: DCDC_REG2 { |
| 202 |
regulator-always-on; |
| 203 |
regulator-boot-on; |
| 204 |
regulator-max-microvolt = <1350000>; |
| 205 |
regulator-min-microvolt = <950000>; |
| 206 |
regulator-name = "vdd_arm"; |
| 207 |
regulator-ramp-delay = <6001>; |
| 208 |
|
| 209 |
regulator-state-mem { |
| 210 |
regulator-off-in-suspend; |
| 211 |
regulator-suspend-microvolt = <950000>; |
| 212 |
}; |
| 213 |
}; |
| 214 |
|
| 215 |
vcc_ddr: DCDC_REG3 { |
| 216 |
regulator-always-on; |
| 217 |
regulator-boot-on; |
| 218 |
regulator-name = "vcc_ddr"; |
| 219 |
|
| 220 |
regulator-state-mem { |
| 221 |
regulator-on-in-suspend; |
| 222 |
}; |
| 223 |
}; |
| 224 |
|
| 225 |
vcc_3v3: DCDC_REG4 { |
| 226 |
regulator-always-on; |
| 227 |
regulator-boot-on; |
| 228 |
regulator-max-microvolt = <3300000>; |
| 229 |
regulator-min-microvolt = <3300000>; |
| 230 |
regulator-name = "vcc_3v3"; |
| 231 |
|
| 232 |
regulator-state-mem { |
| 233 |
regulator-off-in-suspend; |
| 234 |
regulator-suspend-microvolt = <3300000>; |
| 235 |
}; |
| 236 |
}; |
| 237 |
|
| 238 |
vcc_1v8: LDO_REG2 { |
| 239 |
regulator-always-on; |
| 240 |
regulator-boot-on; |
| 241 |
regulator-max-microvolt = <1800000>; |
| 242 |
regulator-min-microvolt = <1800000>; |
| 243 |
regulator-name = "vcc_1v8"; |
| 244 |
|
| 245 |
regulator-state-mem { |
| 246 |
regulator-on-in-suspend; |
| 247 |
regulator-suspend-microvolt = <1800000>; |
| 248 |
}; |
| 249 |
}; |
| 250 |
|
| 251 |
vdd_1v0: LDO_REG3 { |
| 252 |
regulator-always-on; |
| 253 |
regulator-boot-on; |
| 254 |
regulator-max-microvolt = <1000000>; |
| 255 |
regulator-min-microvolt = <1000000>; |
| 256 |
regulator-name = "vdd_1v0"; |
| 257 |
|
| 258 |
regulator-state-mem { |
| 259 |
regulator-on-in-suspend; |
| 260 |
regulator-suspend-microvolt = <1000000>; |
| 261 |
}; |
| 262 |
}; |
| 263 |
|
| 264 |
vcc3v3_pmu: LDO_REG4 { |
| 265 |
regulator-always-on; |
| 266 |
regulator-boot-on; |
| 267 |
regulator-max-microvolt = <3300000>; |
| 268 |
regulator-min-microvolt = <3300000>; |
| 269 |
regulator-name = "vcc3v3_pmu"; |
| 270 |
|
| 271 |
regulator-state-mem { |
| 272 |
regulator-on-in-suspend; |
| 273 |
regulator-suspend-microvolt = <3300000>; |
| 274 |
}; |
| 275 |
}; |
| 276 |
|
| 277 |
vccio_sd: LDO_REG5 { |
| 278 |
regulator-always-on; |
| 279 |
regulator-boot-on; |
| 280 |
regulator-max-microvolt = <3300000>; |
| 281 |
regulator-min-microvolt = <1800000>; |
| 282 |
regulator-name = "vccio_sd"; |
| 283 |
|
| 284 |
regulator-state-mem { |
| 285 |
regulator-on-in-suspend; |
| 286 |
regulator-suspend-microvolt = <3300000>; |
| 287 |
}; |
| 288 |
}; |
| 289 |
|
| 290 |
vcc_sd: LDO_REG6 { |
| 291 |
regulator-boot-on; |
| 292 |
regulator-max-microvolt = <3300000>; |
| 293 |
regulator-min-microvolt = <3300000>; |
| 294 |
regulator-name = "vcc_sd"; |
| 295 |
|
| 296 |
regulator-state-mem { |
| 297 |
regulator-on-in-suspend; |
| 298 |
regulator-suspend-microvolt = <3300000>; |
| 299 |
}; |
| 300 |
}; |
| 301 |
|
| 302 |
vcc_bl: LDO_REG7 { |
| 303 |
regulator-max-microvolt = <3300000>; |
| 304 |
regulator-min-microvolt = <3300000>; |
| 305 |
regulator-name = "vcc_bl"; |
| 306 |
|
| 307 |
regulator-state-mem { |
| 308 |
regulator-off-in-suspend; |
| 309 |
regulator-suspend-microvolt = <3300000>; |
| 310 |
}; |
| 311 |
}; |
| 312 |
|
| 313 |
vcc_lcd: LDO_REG8 { |
| 314 |
regulator-max-microvolt = <2800000>; |
| 315 |
regulator-min-microvolt = <2800000>; |
| 316 |
regulator-name = "vcc_lcd"; |
| 317 |
|
| 318 |
regulator-state-mem { |
| 319 |
regulator-off-in-suspend; |
| 320 |
regulator-suspend-microvolt = <2800000>; |
| 321 |
}; |
| 322 |
}; |
| 323 |
|
| 324 |
vcc_wifi: LDO_REG9 { |
| 325 |
regulator-max-microvolt = <3300000>; |
| 326 |
regulator-min-microvolt = <3300000>; |
| 327 |
regulator-name = "vcc_wifi"; |
| 328 |
|
| 329 |
regulator-state-mem { |
| 330 |
regulator-off-in-suspend; |
| 331 |
regulator-suspend-microvolt = <3300000>; |
| 332 |
}; |
| 333 |
}; |
| 334 |
|
| 335 |
usb_midu: BOOST { |
| 336 |
regulator-always-on; |
| 337 |
regulator-boot-on; |
| 338 |
regulator-max-microvolt = <5400000>; |
| 339 |
regulator-min-microvolt = <5000000>; |
| 340 |
regulator-name = "usb_midu"; |
| 341 |
}; |
| 342 |
}; |
| 343 |
|
| 344 |
rk817_codec: codec { |
| 345 |
rockchip,mic-in-differential; |
| 346 |
}; |
| 347 |
}; |
| 348 |
}; |
| 349 |
|
| 350 |
&i2s1_2ch { |
| 351 |
status = "okay"; |
| 352 |
}; |
| 353 |
|
| 354 |
&io_domains { |
| 355 |
vccio1-supply = <&vcc_3v3>; |
| 356 |
vccio2-supply = <&vccio_sd>; |
| 357 |
vccio3-supply = <&vcc_3v3>; |
| 358 |
vccio4-supply = <&vcc_3v3>; |
| 359 |
vccio5-supply = <&vcc_3v3>; |
| 360 |
vccio6-supply = <&vcc_3v3>; |
| 361 |
status = "okay"; |
| 362 |
}; |
| 363 |
|
| 364 |
&pmu_io_domains { |
| 365 |
pmuio1-supply = <&vcc3v3_pmu>; |
| 366 |
pmuio2-supply = <&vcc3v3_pmu>; |
| 367 |
status = "okay"; |
| 368 |
}; |
| 369 |
|
| 370 |
&pwm0 { |
| 371 |
status = "okay"; |
| 372 |
}; |
| 373 |
|
| 374 |
&pwm1 { |
| 375 |
status = "okay"; |
| 376 |
}; |
| 377 |
|
| 378 |
&saradc { |
| 379 |
vref-supply = <&vcc_1v8>; |
| 380 |
status = "okay"; |
| 381 |
}; |
| 382 |
|
| 383 |
&sdmmc { |
| 384 |
cap-sd-highspeed; |
| 385 |
card-detect-delay = <200>; |
| 386 |
cd-gpios = <&gpio0 RK_PA3 GPIO_ACTIVE_LOW>; |
| 387 |
sd-uhs-sdr12; |
| 388 |
sd-uhs-sdr25; |
| 389 |
sd-uhs-sdr50; |
| 390 |
sd-uhs-sdr104; |
| 391 |
vmmc-supply = <&vcc_sd>; |
| 392 |
vqmmc-supply = <&vccio_sd>; |
| 393 |
status = "okay"; |
| 394 |
}; |
| 395 |
|
| 396 |
&sfc { |
| 397 |
#address-cells = <1>; |
| 398 |
pinctrl-0 = <&sfc_clk &sfc_cs0 &sfc_bus2>; |
| 399 |
pinctrl-names = "default"; |
| 400 |
#size-cells = <0>; |
| 401 |
status = "okay"; |
| 402 |
|
| 403 |
flash@0 { |
| 404 |
compatible = "jedec,spi-nor"; |
| 405 |
reg = <0>; |
| 406 |
spi-max-frequency = <108000000>; |
| 407 |
spi-rx-bus-width = <2>; |
| 408 |
spi-tx-bus-width = <1>; |
| 409 |
}; |
| 410 |
}; |
| 411 |
|
| 412 |
&tsadc { |
| 413 |
status = "okay"; |
| 414 |
}; |
| 415 |
|
| 416 |
&u2phy { |
| 417 |
status = "okay"; |
| 418 |
|
| 419 |
u2phy_host: host-port { |
| 420 |
status = "okay"; |
| 421 |
}; |
| 422 |
|
| 423 |
u2phy_otg: otg-port { |
| 424 |
status = "disabled"; |
| 425 |
}; |
| 426 |
}; |
| 427 |
|
| 428 |
&usb20_otg { |
| 429 |
status = "okay"; |
| 430 |
}; |
| 431 |
|
| 432 |
&uart2 { |
| 433 |
pinctrl-0 = <&uart2m1_xfer>; |
| 434 |
pinctrl-names = "default"; |
| 435 |
status = "okay"; |
| 436 |
}; |
| 437 |
|
| 438 |
&vopb { |
| 439 |
status = "okay"; |
| 440 |
}; |
| 441 |
|
| 442 |
&vopb_mmu { |
| 443 |
status = "okay"; |
| 444 |
}; |
| 445 |
|
| 446 |
&pinctrl { |
| 447 |
headphone { |
| 448 |
hp_det: hp-det { |
| 449 |
rockchip,pins = <2 RK_PC6 RK_FUNC_GPIO &pcfg_pull_down>; |
| 450 |
}; |
| 451 |
}; |
| 452 |
|
| 453 |
leds { |
| 454 |
led_pin: led-pin { |
| 455 |
rockchip,pins = <2 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>; |
| 456 |
}; |
| 457 |
}; |
| 458 |
|
| 459 |
pmic { |
| 460 |
dc_det: dc-det { |
| 461 |
rockchip,pins = <0 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>; |
| 462 |
}; |
| 463 |
|
| 464 |
pmic_int: pmic-int { |
| 465 |
rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>; |
| 466 |
}; |
| 467 |
|
| 468 |
soc_slppin_gpio: soc_slppin_gpio { |
| 469 |
rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_output_low>; |
| 470 |
}; |
| 471 |
|
| 472 |
soc_slppin_rst: soc_slppin_rst { |
| 473 |
rockchip,pins = <0 RK_PA4 2 &pcfg_pull_none>; |
| 474 |
}; |
| 475 |
|
| 476 |
soc_slppin_slp: soc_slppin_slp { |
| 477 |
rockchip,pins = <0 RK_PA4 1 &pcfg_pull_none>; |
| 478 |
}; |
| 479 |
}; |
| 480 |
}; |