| 1 |
// SPDX-License-Identifier: (GPL-2.0+ OR MIT) |
| 2 |
|
| 3 |
/dts-v1/; |
| 4 |
|
| 5 |
#include <dt-bindings/leds/common.h> |
| 6 |
#include "rk3308.dtsi" |
| 7 |
|
| 8 |
/ { |
| 9 |
model = "Radxa ROCK S0"; |
| 10 |
compatible = "radxa,rock-s0", "rockchip,rk3308"; |
| 11 |
|
| 12 |
aliases { |
| 13 |
ethernet0 = &gmac; |
| 14 |
mmc0 = &emmc; |
| 15 |
mmc1 = &sdmmc; |
| 16 |
mmc2 = &sdio; |
| 17 |
}; |
| 18 |
|
| 19 |
chosen { |
| 20 |
stdout-path = "serial0:1500000n8"; |
| 21 |
}; |
| 22 |
|
| 23 |
leds { |
| 24 |
compatible = "gpio-leds"; |
| 25 |
pinctrl-names = "default"; |
| 26 |
pinctrl-0 = <&pwr_led>; |
| 27 |
|
| 28 |
led-green { |
| 29 |
color = <LED_COLOR_ID_GREEN>; |
| 30 |
default-state = "on"; |
| 31 |
function = LED_FUNCTION_HEARTBEAT; |
| 32 |
gpios = <&gpio0 RK_PB6 GPIO_ACTIVE_HIGH>; |
| 33 |
linux,default-trigger = "heartbeat"; |
| 34 |
}; |
| 35 |
}; |
| 36 |
|
| 37 |
vdd_log: regulator-1v04-vdd-log { |
| 38 |
compatible = "regulator-fixed"; |
| 39 |
regulator-name = "vdd_log"; |
| 40 |
regulator-always-on; |
| 41 |
regulator-boot-on; |
| 42 |
regulator-min-microvolt = <1040000>; |
| 43 |
regulator-max-microvolt = <1040000>; |
| 44 |
vin-supply = <&vcc5v0_sys>; |
| 45 |
}; |
| 46 |
|
| 47 |
vcc_ddr: regulator-1v5-vcc-ddr { |
| 48 |
compatible = "regulator-fixed"; |
| 49 |
regulator-name = "vcc_ddr"; |
| 50 |
regulator-always-on; |
| 51 |
regulator-boot-on; |
| 52 |
regulator-min-microvolt = <1500000>; |
| 53 |
regulator-max-microvolt = <1500000>; |
| 54 |
vin-supply = <&vcc5v0_sys>; |
| 55 |
}; |
| 56 |
|
| 57 |
vcc_1v8: regulator-1v8-vcc { |
| 58 |
compatible = "regulator-fixed"; |
| 59 |
regulator-name = "vcc_1v8"; |
| 60 |
regulator-always-on; |
| 61 |
regulator-boot-on; |
| 62 |
regulator-min-microvolt = <1800000>; |
| 63 |
regulator-max-microvolt = <1800000>; |
| 64 |
vin-supply = <&vcc_io>; |
| 65 |
}; |
| 66 |
|
| 67 |
vcc_io: regulator-3v3-vcc-io { |
| 68 |
compatible = "regulator-fixed"; |
| 69 |
regulator-name = "vcc_io"; |
| 70 |
regulator-always-on; |
| 71 |
regulator-boot-on; |
| 72 |
regulator-min-microvolt = <3300000>; |
| 73 |
regulator-max-microvolt = <3300000>; |
| 74 |
vin-supply = <&vcc5v0_sys>; |
| 75 |
}; |
| 76 |
|
| 77 |
/* |
| 78 |
* HW revision prior to v1.2 must pull GPIO4_D6 low to access sdmmc. |
| 79 |
* This is modeled as an always-on active low fixed regulator. |
| 80 |
*/ |
| 81 |
vcc_sd: regulator-3v3-vcc-sd { |
| 82 |
compatible = "regulator-fixed"; |
| 83 |
gpios = <&gpio4 RK_PD6 GPIO_ACTIVE_LOW>; |
| 84 |
pinctrl-names = "default"; |
| 85 |
pinctrl-0 = <&sdmmc_2030>; |
| 86 |
regulator-name = "vcc_sd"; |
| 87 |
regulator-always-on; |
| 88 |
regulator-boot-on; |
| 89 |
regulator-min-microvolt = <3300000>; |
| 90 |
regulator-max-microvolt = <3300000>; |
| 91 |
vin-supply = <&vcc_io>; |
| 92 |
}; |
| 93 |
|
| 94 |
vcc5v0_sys: regulator-5v0-vcc-sys { |
| 95 |
compatible = "regulator-fixed"; |
| 96 |
regulator-name = "vcc5v0_sys"; |
| 97 |
regulator-always-on; |
| 98 |
regulator-boot-on; |
| 99 |
regulator-min-microvolt = <5000000>; |
| 100 |
regulator-max-microvolt = <5000000>; |
| 101 |
}; |
| 102 |
|
| 103 |
vdd_core: regulator-vdd-core { |
| 104 |
compatible = "pwm-regulator"; |
| 105 |
pwms = <&pwm0 0 5000 1>; |
| 106 |
pwm-supply = <&vcc5v0_sys>; |
| 107 |
regulator-name = "vdd_core"; |
| 108 |
regulator-always-on; |
| 109 |
regulator-boot-on; |
| 110 |
regulator-min-microvolt = <827000>; |
| 111 |
regulator-max-microvolt = <1340000>; |
| 112 |
regulator-settling-time-up-us = <250>; |
| 113 |
}; |
| 114 |
|
| 115 |
sdio_pwrseq: sdio-pwrseq { |
| 116 |
compatible = "mmc-pwrseq-simple"; |
| 117 |
pinctrl-names = "default"; |
| 118 |
pinctrl-0 = <&wifi_reg_on>; |
| 119 |
reset-gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_LOW>; |
| 120 |
}; |
| 121 |
}; |
| 122 |
|
| 123 |
&cpu0 { |
| 124 |
cpu-supply = <&vdd_core>; |
| 125 |
}; |
| 126 |
|
| 127 |
&emmc { |
| 128 |
cap-mmc-highspeed; |
| 129 |
no-sd; |
| 130 |
no-sdio; |
| 131 |
non-removable; |
| 132 |
pinctrl-names = "default"; |
| 133 |
pinctrl-0 = <&emmc_bus8 &emmc_clk &emmc_cmd &emmc_pwren>; |
| 134 |
vmmc-supply = <&vcc_io>; |
| 135 |
status = "okay"; |
| 136 |
}; |
| 137 |
|
| 138 |
&gmac { |
| 139 |
clock_in_out = "output"; |
| 140 |
phy-handle = <&rtl8201f>; |
| 141 |
phy-supply = <&vcc_io>; |
| 142 |
status = "okay"; |
| 143 |
|
| 144 |
mdio { |
| 145 |
compatible = "snps,dwmac-mdio"; |
| 146 |
#address-cells = <1>; |
| 147 |
#size-cells = <0>; |
| 148 |
|
| 149 |
rtl8201f: ethernet-phy@1 { |
| 150 |
compatible = "ethernet-phy-ieee802.3-c22"; |
| 151 |
reg = <1>; |
| 152 |
pinctrl-names = "default"; |
| 153 |
pinctrl-0 = <&mac_rst>; |
| 154 |
reset-assert-us = <20000>; |
| 155 |
reset-deassert-us = <50000>; |
| 156 |
reset-gpios = <&gpio0 RK_PA7 GPIO_ACTIVE_LOW>; |
| 157 |
}; |
| 158 |
}; |
| 159 |
}; |
| 160 |
|
| 161 |
&io_domains { |
| 162 |
vccio0-supply = <&vcc_io>; |
| 163 |
vccio1-supply = <&vcc_io>; |
| 164 |
vccio2-supply = <&vcc_io>; |
| 165 |
vccio3-supply = <&vcc_io>; |
| 166 |
vccio4-supply = <&vcc_1v8>; |
| 167 |
vccio5-supply = <&vcc_io>; |
| 168 |
status = "okay"; |
| 169 |
}; |
| 170 |
|
| 171 |
&pinctrl { |
| 172 |
pinctrl-names = "default"; |
| 173 |
pinctrl-0 = <&rtc_32k>; |
| 174 |
|
| 175 |
bluetooth { |
| 176 |
bt_reg_on: bt-reg-on { |
| 177 |
rockchip,pins = <4 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>; |
| 178 |
}; |
| 179 |
|
| 180 |
bt_wake_host: bt-wake-host { |
| 181 |
rockchip,pins = <4 RK_PB4 RK_FUNC_GPIO &pcfg_pull_down>; |
| 182 |
}; |
| 183 |
|
| 184 |
host_wake_bt: host-wake-bt { |
| 185 |
rockchip,pins = <4 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>; |
| 186 |
}; |
| 187 |
}; |
| 188 |
|
| 189 |
gmac { |
| 190 |
mac_rst: mac-rst { |
| 191 |
rockchip,pins = <0 RK_PA7 RK_FUNC_GPIO &pcfg_pull_none>; |
| 192 |
}; |
| 193 |
}; |
| 194 |
|
| 195 |
leds { |
| 196 |
pwr_led: pwr-led { |
| 197 |
rockchip,pins = <0 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>; |
| 198 |
}; |
| 199 |
}; |
| 200 |
|
| 201 |
sdmmc { |
| 202 |
sdmmc_2030: sdmmc-2030 { |
| 203 |
rockchip,pins = <4 RK_PD6 RK_FUNC_GPIO &pcfg_pull_none>; |
| 204 |
}; |
| 205 |
}; |
| 206 |
|
| 207 |
wifi { |
| 208 |
wifi_reg_on: wifi-reg-on { |
| 209 |
rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>; |
| 210 |
}; |
| 211 |
|
| 212 |
wifi_wake_host: wifi-wake-host { |
| 213 |
rockchip,pins = <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_down>; |
| 214 |
}; |
| 215 |
}; |
| 216 |
}; |
| 217 |
|
| 218 |
&pwm0 { |
| 219 |
pinctrl-names = "default"; |
| 220 |
pinctrl-0 = <&pwm0_pin_pull_down>; |
| 221 |
status = "okay"; |
| 222 |
}; |
| 223 |
|
| 224 |
&saradc { |
| 225 |
vref-supply = <&vcc_1v8>; |
| 226 |
status = "okay"; |
| 227 |
}; |
| 228 |
|
| 229 |
&sdio { |
| 230 |
#address-cells = <1>; |
| 231 |
#size-cells = <0>; |
| 232 |
cap-sd-highspeed; |
| 233 |
cap-sdio-irq; |
| 234 |
keep-power-in-suspend; |
| 235 |
max-frequency = <50000000>; |
| 236 |
mmc-pwrseq = <&sdio_pwrseq>; |
| 237 |
no-mmc; |
| 238 |
no-sd; |
| 239 |
non-removable; |
| 240 |
vmmc-supply = <&vcc_io>; |
| 241 |
vqmmc-supply = <&vcc_1v8>; |
| 242 |
status = "okay"; |
| 243 |
|
| 244 |
brcmf: wifi@1 { |
| 245 |
compatible = "brcm,bcm43430a1-fmac", "brcm,bcm4329-fmac"; |
| 246 |
reg = <1>; |
| 247 |
interrupt-parent = <&gpio0>; |
| 248 |
interrupts = <RK_PA0 IRQ_TYPE_LEVEL_HIGH>; |
| 249 |
interrupt-names = "host-wake"; |
| 250 |
pinctrl-names = "default"; |
| 251 |
pinctrl-0 = <&wifi_wake_host>; |
| 252 |
}; |
| 253 |
}; |
| 254 |
|
| 255 |
&sdmmc { |
| 256 |
cap-mmc-highspeed; |
| 257 |
cap-sd-highspeed; |
| 258 |
disable-wp; |
| 259 |
vmmc-supply = <&vcc_sd>; |
| 260 |
status = "okay"; |
| 261 |
}; |
| 262 |
|
| 263 |
&u2phy { |
| 264 |
status = "okay"; |
| 265 |
}; |
| 266 |
|
| 267 |
&u2phy_host { |
| 268 |
status = "okay"; |
| 269 |
}; |
| 270 |
|
| 271 |
&u2phy_otg { |
| 272 |
status = "okay"; |
| 273 |
}; |
| 274 |
|
| 275 |
&uart0 { |
| 276 |
pinctrl-names = "default"; |
| 277 |
pinctrl-0 = <&uart0_xfer>; |
| 278 |
status = "okay"; |
| 279 |
}; |
| 280 |
|
| 281 |
&uart4 { |
| 282 |
uart-has-rtscts; |
| 283 |
status = "okay"; |
| 284 |
|
| 285 |
bluetooth { |
| 286 |
compatible = "brcm,bcm43430a1-bt"; |
| 287 |
clocks = <&cru SCLK_RTC32K>; |
| 288 |
clock-names = "lpo"; |
| 289 |
interrupt-parent = <&gpio4>; |
| 290 |
interrupts = <RK_PB4 IRQ_TYPE_LEVEL_HIGH>; |
| 291 |
interrupt-names = "host-wakeup"; |
| 292 |
device-wakeup-gpios = <&gpio4 RK_PB2 GPIO_ACTIVE_HIGH>; |
| 293 |
shutdown-gpios = <&gpio4 RK_PB3 GPIO_ACTIVE_HIGH>; |
| 294 |
pinctrl-names = "default"; |
| 295 |
pinctrl-0 = <&bt_reg_on &bt_wake_host &host_wake_bt>; |
| 296 |
vbat-supply = <&vcc_io>; |
| 297 |
vddio-supply = <&vcc_1v8>; |
| 298 |
}; |
| 299 |
}; |
| 300 |
|
| 301 |
&usb_host_ehci { |
| 302 |
status = "okay"; |
| 303 |
}; |
| 304 |
|
| 305 |
&usb_host_ohci { |
| 306 |
status = "okay"; |
| 307 |
}; |
| 308 |
|
| 309 |
&usb20_otg { |
| 310 |
dr_mode = "peripheral"; |
| 311 |
status = "okay"; |
| 312 |
}; |
| 313 |
|
| 314 |
&wdt { |
| 315 |
status = "okay"; |
| 316 |
}; |