Debian Codegraph @

scripts/dtc/include-prefixes/arm64/rockchip/rk3308-rock-pi-s.dts

raw
1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
2 /*
3 * Copyright (c) 2019 Akash Gajjar <[email protected]>
4 * Copyright (c) 2019 Jagan Teki <[email protected]>
5 */
6
7 /dts-v1/;
8
9 #include <dt-bindings/leds/common.h>
10 #include "rk3308.dtsi"
11
12 / {
13 model = "Radxa ROCK Pi S";
14 compatible = "radxa,rockpis", "rockchip,rk3308";
15
16 aliases {
17 ethernet0 = &gmac;
18 mmc0 = &emmc;
19 mmc1 = &sdmmc;
20 mmc2 = &sdio;
21 };
22
23 chosen {
24 stdout-path = "serial0:1500000n8";
25 };
26
27 leds {
28 compatible = "gpio-leds";
29 pinctrl-names = "default";
30 pinctrl-0 = <&green_led>, <&heartbeat_led>;
31
32 green-led {
33 color = <LED_COLOR_ID_GREEN>;
34 default-state = "on";
35 function = LED_FUNCTION_POWER;
36 gpios = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>;
37 label = "rockpis:green:power";
38 };
39
40 blue-led {
41 color = <LED_COLOR_ID_BLUE>;
42 default-state = "on";
43 function = LED_FUNCTION_HEARTBEAT;
44 gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>;
45 label = "rockpis:blue:user";
46 linux,default-trigger = "heartbeat";
47 };
48 };
49
50 sdio_pwrseq: sdio-pwrseq {
51 compatible = "mmc-pwrseq-simple";
52 pinctrl-0 = <&wifi_enable_h>;
53 pinctrl-names = "default";
54 reset-gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_LOW>;
55 };
56
57 vcc_1v8: regulator-vcc-1v8 {
58 compatible = "regulator-fixed";
59 regulator-name = "vcc_1v8";
60 regulator-always-on;
61 regulator-boot-on;
62 regulator-min-microvolt = <1800000>;
63 regulator-max-microvolt = <1800000>;
64 vin-supply = <&vcc_io>;
65 };
66
67 vcc_io: regulator-vcc-io {
68 compatible = "regulator-fixed";
69 regulator-name = "vcc_io";
70 regulator-always-on;
71 regulator-boot-on;
72 regulator-min-microvolt = <3300000>;
73 regulator-max-microvolt = <3300000>;
74 vin-supply = <&vcc5v0_sys>;
75 };
76
77 vcc_ddr: regulator-vcc-ddr {
78 compatible = "regulator-fixed";
79 regulator-name = "vcc_ddr";
80 regulator-always-on;
81 regulator-boot-on;
82 regulator-min-microvolt = <1500000>;
83 regulator-max-microvolt = <1500000>;
84 vin-supply = <&vcc5v0_sys>;
85 };
86
87 vcc5v0_otg: regulator-vcc5v0-otg {
88 compatible = "regulator-fixed";
89 enable-active-high;
90 gpio = <&gpio0 RK_PC5 GPIO_ACTIVE_HIGH>;
91 pinctrl-names = "default";
92 pinctrl-0 = <&otg_vbus_drv>;
93 regulator-name = "vcc5v0_otg";
94 regulator-always-on;
95 vin-supply = <&vcc5v0_sys>;
96 };
97
98 vcc5v0_sys: regulator-vcc5v0-sys {
99 compatible = "regulator-fixed";
100 regulator-name = "vcc5v0_sys";
101 regulator-always-on;
102 regulator-boot-on;
103 regulator-min-microvolt = <5000000>;
104 regulator-max-microvolt = <5000000>;
105 };
106
107 vdd_core: regulator-vdd-core {
108 compatible = "pwm-regulator";
109 pwms = <&pwm0 0 5000 1>;
110 pwm-supply = <&vcc5v0_sys>;
111 regulator-name = "vdd_core";
112 regulator-min-microvolt = <827000>;
113 regulator-max-microvolt = <1340000>;
114 regulator-settling-time-up-us = <250>;
115 regulator-always-on;
116 regulator-boot-on;
117 };
118
119 vdd_log: regulator-vdd-log {
120 compatible = "regulator-fixed";
121 regulator-name = "vdd_log";
122 regulator-always-on;
123 regulator-boot-on;
124 regulator-min-microvolt = <1050000>;
125 regulator-max-microvolt = <1050000>;
126 vin-supply = <&vcc5v0_sys>;
127 };
128 };
129
130 &cpu0 {
131 cpu-supply = <&vdd_core>;
132 };
133
134 &emmc {
135 cap-mmc-highspeed;
136 cap-sd-highspeed;
137 no-sdio;
138 non-removable;
139 pinctrl-names = "default";
140 pinctrl-0 = <&emmc_bus8 &emmc_clk &emmc_cmd>;
141 vmmc-supply = <&vcc_io>;
142 status = "okay";
143 };
144
145 &gmac {
146 clock_in_out = "output";
147 phy-handle = <&rtl8201f>;
148 phy-supply = <&vcc_io>;
149 status = "okay";
150
151 mdio {
152 compatible = "snps,dwmac-mdio";
153 #address-cells = <1>;
154 #size-cells = <0>;
155
156 rtl8201f: ethernet-phy@1 {
157 compatible = "ethernet-phy-ieee802.3-c22";
158 reg = <1>;
159 pinctrl-names = "default";
160 pinctrl-0 = <&mac_rst>;
161 reset-assert-us = <20000>;
162 reset-deassert-us = <50000>;
163 reset-gpios = <&gpio0 RK_PA7 GPIO_ACTIVE_LOW>;
164 };
165 };
166 };
167
168 &gpio0 {
169 gpio-line-names =
170 /* GPIO0_A0 - A7 */
171 "", "", "", "", "", "", "", "",
172 /* GPIO0_B0 - B7 */
173 "", "", "", "header1-pin3 [GPIO0_B3]",
174 "header1-pin5 [GPIO0_B4]", "", "",
175 "header1-pin11 [GPIO0_B7]",
176 /* GPIO0_C0 - C7 */
177 "header1-pin13 [GPIO0_C0]",
178 "header1-pin15 [GPIO0_C1]", "", "", "",
179 "", "", "",
180 /* GPIO0_D0 - D7 */
181 "", "", "", "", "", "", "", "";
182 };
183
184 &gpio1 {
185 gpio-line-names =
186 /* GPIO1_A0 - A7 */
187 "", "", "", "", "", "", "", "",
188 /* GPIO1_B0 - B7 */
189 "", "", "", "", "", "", "", "",
190 /* GPIO1_C0 - C7 */
191 "", "", "", "", "", "", "header1-pin21 [GPIO1_C6]",
192 "header1-pin19 [GPIO1_C7]",
193 /* GPIO1_D0 - D7 */
194 "header1-pin23 [GPIO1_D0]", "header1-pin24 [GPIO1_D1]",
195 "", "", "", "", "", "";
196 };
197
198 &gpio2 {
199 gpio-line-names =
200 /* GPIO2_A0 - A7 */
201 "header1-pin10 [GPIO2_A0]", "header1-pin8 [GPIO2_A1]",
202 "", "",
203 "header1-pin7 [GPIO2_A4]", "header1-pin12 [GPIO2_A5]",
204 "header2-pin46 [GPIO2_A6]", "header1-pin22 [GPIO1_A7]",
205 /* GPIO2_B0 - B7 */
206 "header2-pin45 [GPIO2_B0]", "header1-pin18 [GPIO2_B1]",
207 "header1-pin16 [GPIO2_B2]", "header2-pin44 [GPIO2_B3]",
208 "header2-pin43 [GPIO2_B4]", "header2-pin28 [GPIO2_B5]",
209 "header2-pin30 [GPIO2_B6]", "header2-pin32 [GPIO2_B7]",
210 /* GPIO2_C0 - C7 */
211 "header2-pin34 [GPIO2_C0]", "", "", "", "", "", "", "",
212 /* GPIO2_D0 - D7 */
213 "", "", "", "", "", "", "", "";
214 };
215
216 &gpio3 {
217 gpio-line-names =
218 /* GPIO3_A0 - A7 */
219 "", "", "", "", "", "", "", "",
220 /* GPIO3_B0 - B7 */
221 "", "", "header2-pin42 [GPIO3_B2]",
222 "header2-pin41 [GPIO3_B3]", "header2-pin40 [GPIO3_B4]",
223 "header2-pin39 [GPIO3_B5]", "", "",
224 /* GPIO3_C0 - C7 */
225 "", "", "", "", "", "", "", "",
226 /* GPIO3_D0 - D7 */
227 "", "", "", "", "", "", "", "";
228 };
229
230 &i2c1 {
231 status = "okay";
232 };
233
234 &io_domains {
235 vccio0-supply = <&vcc_io>;
236 vccio1-supply = <&vcc_io>;
237 vccio2-supply = <&vcc_io>;
238 vccio3-supply = <&vcc_io>;
239 vccio4-supply = <&vcc_1v8>;
240 vccio5-supply = <&vcc_io>;
241 status = "okay";
242 };
243
244 &pinctrl {
245 pinctrl-names = "default";
246 pinctrl-0 = <&rtc_32k>;
247
248 bluetooth {
249 bt_reg_on: bt-reg-on {
250 rockchip,pins = <4 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
251 };
252
253 bt_wake_host: bt-wake-host {
254 rockchip,pins = <4 RK_PB4 RK_FUNC_GPIO &pcfg_pull_down>;
255 };
256
257 host_wake_bt: host-wake-bt {
258 rockchip,pins = <4 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
259 };
260 };
261
262 gmac {
263 mac_rst: mac-rst {
264 rockchip,pins = <0 RK_PA7 RK_FUNC_GPIO &pcfg_pull_none>;
265 };
266 };
267
268 leds {
269 green_led: green-led {
270 rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
271 };
272
273 heartbeat_led: heartbeat-led {
274 rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
275 };
276 };
277
278 usb {
279 otg_vbus_drv: otg-vbus-drv {
280 rockchip,pins = <0 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>;
281 };
282 };
283
284 sdio-pwrseq {
285 wifi_enable_h: wifi-enable-h {
286 rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
287 };
288
289 wifi_host_wake: wifi-host-wake {
290 rockchip,pins = <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_down>;
291 };
292 };
293 };
294
295 &pwm0 {
296 status = "okay";
297 pinctrl-0 = <&pwm0_pin_pull_down>;
298 };
299
300 &saradc {
301 vref-supply = <&vcc_1v8>;
302 status = "okay";
303 };
304
305 &sdio {
306 #address-cells = <1>;
307 #size-cells = <0>;
308 cap-sd-highspeed;
309 cap-sdio-irq;
310 keep-power-in-suspend;
311 max-frequency = <100000000>;
312 mmc-pwrseq = <&sdio_pwrseq>;
313 no-mmc;
314 no-sd;
315 non-removable;
316 sd-uhs-sdr50;
317 vmmc-supply = <&vcc_io>;
318 vqmmc-supply = <&vcc_1v8>;
319 status = "okay";
320
321 rtl8723ds: wifi@1 {
322 reg = <1>;
323 interrupt-parent = <&gpio0>;
324 interrupts = <RK_PA0 IRQ_TYPE_LEVEL_HIGH>;
325 interrupt-names = "host-wake";
326 pinctrl-names = "default";
327 pinctrl-0 = <&wifi_host_wake>;
328 };
329 };
330
331 &sdmmc {
332 cap-mmc-highspeed;
333 cap-sd-highspeed;
334 disable-wp;
335 vmmc-supply = <&vcc_io>;
336 status = "okay";
337 };
338
339 &u2phy {
340 status = "okay";
341
342 u2phy_host: host-port {
343 phy-supply = <&vcc5v0_otg>;
344 status = "okay";
345 };
346
347 u2phy_otg: otg-port {
348 phy-supply = <&vcc5v0_otg>;
349 status = "okay";
350 };
351 };
352
353 &uart0 {
354 pinctrl-names = "default";
355 pinctrl-0 = <&uart0_xfer>;
356 status = "okay";
357 };
358
359 &uart4 {
360 uart-has-rtscts;
361 status = "okay";
362
363 bluetooth {
364 compatible = "realtek,rtl8723ds-bt";
365 device-wake-gpios = <&gpio4 RK_PB2 GPIO_ACTIVE_HIGH>;
366 enable-gpios = <&gpio4 RK_PB3 GPIO_ACTIVE_HIGH>;
367 host-wake-gpios = <&gpio4 RK_PB4 GPIO_ACTIVE_HIGH>;
368 pinctrl-names = "default";
369 pinctrl-0 = <&bt_reg_on &bt_wake_host &host_wake_bt>;
370 };
371 };
372
373 &usb_host_ehci {
374 status = "okay";
375 };
376
377 &usb_host_ohci {
378 status = "okay";
379 };
380
381 &usb20_otg {
382 dr_mode = "peripheral";
383 status = "okay";
384 };
385
386 &wdt {
387 status = "okay";
388 };