| 1 |
// SPDX-License-Identifier: (GPL-2.0+ OR MIT) |
| 2 |
/* |
| 3 |
* Copyright (c) 2022 Theobroma Systems Design und Consulting GmbH |
| 4 |
*/ |
| 5 |
|
| 6 |
/dts-v1/; |
| 7 |
#include "px30-ringneck.dtsi" |
| 8 |
#include <dt-bindings/input/input.h> |
| 9 |
#include <dt-bindings/leds/common.h> |
| 10 |
|
| 11 |
/ { |
| 12 |
model = "Theobroma Systems PX30-uQ7 SoM on Haikou devkit"; |
| 13 |
compatible = "tsd,px30-ringneck-haikou", "rockchip,px30"; |
| 14 |
|
| 15 |
aliases { |
| 16 |
ethernet0 = &gmac; |
| 17 |
mmc2 = &sdmmc; |
| 18 |
}; |
| 19 |
|
| 20 |
chosen { |
| 21 |
stdout-path = "serial0:115200n8"; |
| 22 |
}; |
| 23 |
|
| 24 |
gpio-keys { |
| 25 |
compatible = "gpio-keys"; |
| 26 |
pinctrl-0 = <&haikou_keys_pin>; |
| 27 |
pinctrl-names = "default"; |
| 28 |
|
| 29 |
button-batlow-n { |
| 30 |
label = "BATLOW#"; |
| 31 |
linux,code = <KEY_BATTERY>; |
| 32 |
gpios = <&gpio3 RK_PA7 GPIO_ACTIVE_LOW>; |
| 33 |
}; |
| 34 |
|
| 35 |
button-slp-btn-n { |
| 36 |
label = "SLP_BTN#"; |
| 37 |
linux,code = <KEY_SLEEP>; |
| 38 |
gpios = <&gpio1 RK_PB7 GPIO_ACTIVE_LOW>; |
| 39 |
}; |
| 40 |
|
| 41 |
button-wake-n { |
| 42 |
label = "WAKE#"; |
| 43 |
linux,code = <KEY_WAKEUP>; |
| 44 |
gpios = <&gpio1 RK_PB6 GPIO_ACTIVE_LOW>; |
| 45 |
wakeup-source; |
| 46 |
}; |
| 47 |
|
| 48 |
switch-lid-btn-n { |
| 49 |
label = "LID_BTN#"; |
| 50 |
linux,code = <SW_LID>; |
| 51 |
linux,input-type = <EV_SW>; |
| 52 |
gpios = <&gpio3 RK_PA6 GPIO_ACTIVE_LOW>; |
| 53 |
}; |
| 54 |
}; |
| 55 |
|
| 56 |
leds { |
| 57 |
pinctrl-0 = <&module_led_pin>, <&sd_card_led_pin>; |
| 58 |
|
| 59 |
sd_card_led: led-1 { |
| 60 |
gpios = <&gpio3 RK_PB3 GPIO_ACTIVE_HIGH>; |
| 61 |
linux,default-trigger = "mmc2"; |
| 62 |
function = LED_FUNCTION_SD; |
| 63 |
color = <LED_COLOR_ID_BLUE>; |
| 64 |
}; |
| 65 |
}; |
| 66 |
|
| 67 |
i2s0-sound { |
| 68 |
compatible = "simple-audio-card"; |
| 69 |
simple-audio-card,format = "i2s"; |
| 70 |
simple-audio-card,name = "Haikou,I2S-codec"; |
| 71 |
simple-audio-card,mclk-fs = <512>; |
| 72 |
simple-audio-card,frame-master = <&sgtl5000_codec>; |
| 73 |
simple-audio-card,bitclock-master = <&sgtl5000_codec>; |
| 74 |
|
| 75 |
sgtl5000_codec: simple-audio-card,codec { |
| 76 |
sound-dai = <&sgtl5000>; |
| 77 |
// Prevent the dai subsystem from overwriting the clock |
| 78 |
// frequency. We are using a fixed-frequency oscillator. |
| 79 |
system-clock-fixed; |
| 80 |
}; |
| 81 |
|
| 82 |
simple-audio-card,cpu { |
| 83 |
sound-dai = <&i2s0_8ch>; |
| 84 |
}; |
| 85 |
}; |
| 86 |
|
| 87 |
sgtl5000_clk: sgtl5000-oscillator { |
| 88 |
compatible = "fixed-clock"; |
| 89 |
#clock-cells = <0>; |
| 90 |
clock-frequency = <24576000>; |
| 91 |
}; |
| 92 |
|
| 93 |
dc_12v: regulator-dc-12v { |
| 94 |
compatible = "regulator-fixed"; |
| 95 |
regulator-name = "dc_12v"; |
| 96 |
regulator-always-on; |
| 97 |
regulator-boot-on; |
| 98 |
regulator-min-microvolt = <12000000>; |
| 99 |
regulator-max-microvolt = <12000000>; |
| 100 |
}; |
| 101 |
|
| 102 |
vcc3v3_baseboard: regulator-vcc3v3-baseboard { |
| 103 |
compatible = "regulator-fixed"; |
| 104 |
regulator-name = "vcc3v3_baseboard"; |
| 105 |
regulator-always-on; |
| 106 |
regulator-boot-on; |
| 107 |
regulator-min-microvolt = <3300000>; |
| 108 |
regulator-max-microvolt = <3300000>; |
| 109 |
vin-supply = <&dc_12v>; |
| 110 |
}; |
| 111 |
|
| 112 |
vcc5v0_baseboard: regulator-vcc5v0-baseboard { |
| 113 |
compatible = "regulator-fixed"; |
| 114 |
regulator-name = "vcc5v0_baseboard"; |
| 115 |
regulator-always-on; |
| 116 |
regulator-boot-on; |
| 117 |
regulator-min-microvolt = <5000000>; |
| 118 |
regulator-max-microvolt = <5000000>; |
| 119 |
vin-supply = <&dc_12v>; |
| 120 |
}; |
| 121 |
|
| 122 |
vdda_codec: regulator-vdda-codec { |
| 123 |
compatible = "regulator-fixed"; |
| 124 |
regulator-name = "vdda_codec"; |
| 125 |
regulator-boot-on; |
| 126 |
regulator-min-microvolt = <3300000>; |
| 127 |
regulator-max-microvolt = <3300000>; |
| 128 |
vin-supply = <&vcc5v0_baseboard>; |
| 129 |
}; |
| 130 |
|
| 131 |
vddd_codec: regulator-vddd-codec { |
| 132 |
compatible = "regulator-fixed"; |
| 133 |
regulator-name = "vddd_codec"; |
| 134 |
regulator-boot-on; |
| 135 |
regulator-min-microvolt = <1600000>; |
| 136 |
regulator-max-microvolt = <1600000>; |
| 137 |
vin-supply = <&vcc5v0_baseboard>; |
| 138 |
}; |
| 139 |
}; |
| 140 |
|
| 141 |
&i2c2 { |
| 142 |
status = "okay"; |
| 143 |
clock-frequency = <400000>; |
| 144 |
|
| 145 |
sgtl5000: codec@a { |
| 146 |
compatible = "fsl,sgtl5000"; |
| 147 |
reg = <0x0a>; |
| 148 |
clocks = <&sgtl5000_clk>; |
| 149 |
#sound-dai-cells = <0>; |
| 150 |
VDDA-supply = <&vdda_codec>; |
| 151 |
VDDIO-supply = <&vcc3v3_baseboard>; |
| 152 |
VDDD-supply = <&vddd_codec>; |
| 153 |
}; |
| 154 |
}; |
| 155 |
|
| 156 |
&i2c3 { |
| 157 |
status = "okay"; |
| 158 |
|
| 159 |
eeprom@50 { |
| 160 |
reg = <0x50>; |
| 161 |
compatible = "atmel,24c01"; |
| 162 |
pagesize = <8>; |
| 163 |
size = <128>; |
| 164 |
vcc-supply = <&vcc3v3_baseboard>; |
| 165 |
}; |
| 166 |
}; |
| 167 |
|
| 168 |
&i2s0_8ch { |
| 169 |
status = "okay"; |
| 170 |
}; |
| 171 |
|
| 172 |
&gmac { |
| 173 |
status = "okay"; |
| 174 |
}; |
| 175 |
|
| 176 |
&pinctrl { |
| 177 |
haikou { |
| 178 |
haikou_keys_pin: haikou-keys-pin { |
| 179 |
rockchip,pins = |
| 180 |
/* WAKE# */ |
| 181 |
<1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_up>, |
| 182 |
/* SLP_BTN# */ |
| 183 |
<1 RK_PB7 RK_FUNC_GPIO &pcfg_pull_up>, |
| 184 |
/* LID_BTN */ |
| 185 |
<3 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>, |
| 186 |
/* BATLOW# */ |
| 187 |
<3 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up>, |
| 188 |
/* BIOS_DISABLE# */ |
| 189 |
<2 RK_PC2 RK_FUNC_GPIO &pcfg_pull_up>; |
| 190 |
}; |
| 191 |
}; |
| 192 |
|
| 193 |
leds { |
| 194 |
sd_card_led_pin: sd-card-led-pin { |
| 195 |
rockchip,pins = |
| 196 |
<3 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>; |
| 197 |
}; |
| 198 |
}; |
| 199 |
|
| 200 |
uart { |
| 201 |
uart5_rts_pin: uart5-rts-pin { |
| 202 |
rockchip,pins = |
| 203 |
<0 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>; |
| 204 |
}; |
| 205 |
}; |
| 206 |
}; |
| 207 |
|
| 208 |
&pwm0 { |
| 209 |
status = "okay"; |
| 210 |
}; |
| 211 |
|
| 212 |
&sdmmc { |
| 213 |
sd-uhs-sdr12; |
| 214 |
sd-uhs-sdr25; |
| 215 |
sd-uhs-sdr50; |
| 216 |
bus-width = <4>; |
| 217 |
cap-mmc-highspeed; |
| 218 |
cap-sd-highspeed; |
| 219 |
cd-gpios = <&gpio0 RK_PA3 GPIO_ACTIVE_LOW>; |
| 220 |
disable-wp; |
| 221 |
vmmc-supply = <&vcc3v3_baseboard>; |
| 222 |
status = "okay"; |
| 223 |
}; |
| 224 |
|
| 225 |
&spi1 { |
| 226 |
status = "okay"; |
| 227 |
}; |
| 228 |
|
| 229 |
&u2phy_otg { |
| 230 |
status = "okay"; |
| 231 |
}; |
| 232 |
|
| 233 |
&uart0 { |
| 234 |
pinctrl-names = "default"; |
| 235 |
pinctrl-0 = <&uart0_xfer>; |
| 236 |
status = "okay"; |
| 237 |
}; |
| 238 |
|
| 239 |
&uart5 { |
| 240 |
/* Add pinmux for rts-gpios (uart5_rts_pin) */ |
| 241 |
pinctrl-names = "default"; |
| 242 |
pinctrl-0 = <&uart5_xfer &uart5_rts_pin>; |
| 243 |
rts-gpios = <&gpio0 RK_PB5 GPIO_ACTIVE_HIGH>; |
| 244 |
status = "okay"; |
| 245 |
}; |
| 246 |
|
| 247 |
&usb20_otg { |
| 248 |
status = "okay"; |
| 249 |
}; |