Debian Codegraph @

scripts/dtc/include-prefixes/arm64/rockchip/px30-ringneck-haikou-video-demo.dtso

raw
1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
2 /*
3 * Copyright (c) 2025 Cherry Embedded Solutions GmbH
4 *
5 * DEVKIT ADDON CAM-TS-A01
6 * https://embedded.cherry.de/product/development-kit/
7 *
8 * DT-overlay for the camera / DSI demo appliance for Haikou boards.
9 * In the flavour for use with a Ringneck system-on-module.
10 */
11
12 /dts-v1/;
13 /plugin/;
14
15 #include <dt-bindings/clock/px30-cru.h>
16 #include <dt-bindings/gpio/gpio.h>
17 #include <dt-bindings/interrupt-controller/irq.h>
18 #include <dt-bindings/leds/common.h>
19 #include <dt-bindings/pinctrl/rockchip.h>
20
21 &{/} {
22 backlight: backlight {
23 compatible = "pwm-backlight";
24 power-supply = <&dc_12v>;
25 pwms = <&pwm0 0 25000 0>;
26 };
27
28 cam_afvdd_2v8: regulator-cam-afvdd-2v8 {
29 compatible = "regulator-fixed";
30 gpio = <&pca9670 2 GPIO_ACTIVE_LOW>;
31 regulator-max-microvolt = <2800000>;
32 regulator-min-microvolt = <2800000>;
33 regulator-name = "cam-afvdd-2v8";
34 vin-supply = <&vcc2v8_video>;
35 };
36
37 cam_avdd_2v8: regulator-cam-avdd-2v8 {
38 compatible = "regulator-fixed";
39 gpio = <&pca9670 4 GPIO_ACTIVE_LOW>;
40 regulator-max-microvolt = <2800000>;
41 regulator-min-microvolt = <2800000>;
42 regulator-name = "cam-avdd-2v8";
43 vin-supply = <&vcc2v8_video>;
44 };
45
46 cam_dovdd_1v8: regulator-cam-dovdd-1v8 {
47 compatible = "regulator-fixed";
48 gpio = <&pca9670 3 GPIO_ACTIVE_LOW>;
49 regulator-max-microvolt = <1800000>;
50 regulator-min-microvolt = <1800000>;
51 regulator-name = "cam-dovdd-1v8";
52 vin-supply = <&vcc1v8_video>;
53 };
54
55 cam_dvdd_1v2: regulator-cam-dvdd-1v2 {
56 compatible = "regulator-fixed";
57 enable-active-high;
58 gpio = <&pca9670 5 GPIO_ACTIVE_HIGH>;
59 regulator-max-microvolt = <1200000>;
60 regulator-min-microvolt = <1200000>;
61 regulator-name = "cam-dvdd-1v2";
62 vin-supply = <&vcc3v3_baseboard>;
63 };
64
65 vcc1v8_video: regulator-vcc1v8-video {
66 compatible = "regulator-fixed";
67 regulator-always-on;
68 regulator-boot-on;
69 regulator-max-microvolt = <1800000>;
70 regulator-min-microvolt = <1800000>;
71 regulator-name = "vcc1v8-video";
72 vin-supply = <&vcc3v3_baseboard>;
73 };
74
75 vcc2v8_video: regulator-vcc2v8-video {
76 compatible = "regulator-fixed";
77 regulator-always-on;
78 regulator-boot-on;
79 regulator-max-microvolt = <2800000>;
80 regulator-min-microvolt = <2800000>;
81 regulator-name = "vcc2v8-video";
82 vin-supply = <&vcc3v3_baseboard>;
83 };
84
85 video-adapter-leds {
86 compatible = "gpio-leds";
87
88 video-adapter-led {
89 color = <LED_COLOR_ID_BLUE>;
90 gpios = <&pca9670 7 GPIO_ACTIVE_HIGH>;
91 label = "video-adapter-led";
92 linux,default-trigger = "none";
93 };
94 };
95 };
96
97 &cif_clkout_m0 {
98 rockchip,pins =
99 <2 RK_PB3 1 &pcfg_pull_none_12ma>;
100 };
101
102 &csi_dphy {
103 status = "okay";
104 };
105
106 &display_subsystem {
107 status = "okay";
108 };
109
110 &dsi {
111 #address-cells = <1>;
112 #size-cells = <0>;
113 status = "okay";
114
115 panel@0 {
116 compatible = "leadtek,ltk050h3148w";
117 reg = <0>;
118 backlight = <&backlight>;
119 iovcc-supply = <&vcc1v8_video>;
120 reset-gpios = <&pca9670 0 GPIO_ACTIVE_LOW>;
121 vci-supply = <&vcc2v8_video>;
122
123 port {
124 mipi_in_panel: endpoint {
125 remote-endpoint = <&mipi_out_panel>;
126 };
127 };
128 };
129 };
130
131 &dsi_dphy {
132 status = "okay";
133 };
134
135 &dsi_out {
136 mipi_out_panel: endpoint {
137 remote-endpoint = <&mipi_in_panel>;
138 };
139 };
140
141 &i2c1 {
142 #address-cells = <1>;
143 #size-cells = <0>;
144 /* OV5675, GT911, DW9714 are limited to 400KHz */
145 clock-frequency = <400000>;
146
147 focus: focus@c {
148 compatible = "dongwoon,dw9714";
149 reg = <0xc>;
150 vcc-supply = <&cam_afvdd_2v8>;
151 };
152
153 touchscreen@14 {
154 compatible = "goodix,gt911";
155 reg = <0x14>;
156 interrupt-parent = <&gpio0>;
157 interrupts = <RK_PA0 IRQ_TYPE_LEVEL_LOW>;
158 irq-gpios = <&gpio0 RK_PA0 GPIO_ACTIVE_HIGH>;
159 pinctrl-0 = <&touch_int>;
160 pinctrl-names = "default";
161 reset-gpios = <&pca9670 1 GPIO_ACTIVE_HIGH>;
162 AVDD28-supply = <&vcc2v8_video>;
163 VDDIO-supply = <&vcc3v3_baseboard>;
164 };
165
166 pca9670: gpio@27 {
167 compatible = "nxp,pca9670";
168 reg = <0x27>;
169 gpio-controller;
170 #gpio-cells = <2>;
171 pinctrl-0 = <&pca9670_resetn>;
172 pinctrl-names = "default";
173 reset-gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_LOW>;
174 };
175
176 camera@36 {
177 compatible = "ovti,ov5675";
178 reg = <0x36>;
179 clocks = <&cru SCLK_CIF_OUT>;
180 assigned-clocks = <&cru SCLK_CIF_OUT>;
181 /* Only parent to get exactly 19.2MHz */
182 assigned-clock-parents = <&cru USB480M>;
183 assigned-clock-rates = <19200000>;
184 avdd-supply = <&cam_avdd_2v8>;
185 dvdd-supply = <&cam_dvdd_1v2>;
186 dovdd-supply = <&cam_dovdd_1v8>;
187 lens-focus = <&focus>;
188 orientation = <0>;
189 pinctrl-names = "default";
190 pinctrl-0 = <&cif_clkout_m0>;
191 reset-gpios = <&pca9670 6 GPIO_ACTIVE_LOW>;
192 rotation = <180>;
193
194 port {
195 cam_out: endpoint {
196 data-lanes = <1 2>;
197 link-frequencies = /bits/ 64 <450000000>;
198 remote-endpoint = <&mipi_in_cam>;
199 };
200 };
201 };
202 };
203
204 &isp {
205 status = "okay";
206 };
207
208 &isp_in {
209 mipi_in_cam: endpoint {
210 data-lanes = <1 2>;
211 remote-endpoint = <&cam_out>;
212 };
213 };
214
215 &pinctrl {
216 pca9670 {
217 pca9670_resetn: pca9670-resetn {
218 rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
219 };
220 };
221
222 touch {
223 touch_int: touch-int {
224 rockchip,pins = <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>;
225 };
226 };
227 };
228
229 &vopb {
230 status = "okay";
231 };
232
233 &vopb_mmu {
234 status = "okay";
235 };
236
237 &vopl {
238 status = "okay";
239 };
240
241 &vopl_mmu {
242 status = "okay";
243 };