| 1 |
// SPDX-License-Identifier: (GPL-2.0+ OR MIT) |
| 2 |
/* |
| 3 |
* Copyright (c) 2019 Fuzhou Rockchip Electronics Co., Ltd |
| 4 |
*/ |
| 5 |
|
| 6 |
/dts-v1/; |
| 7 |
#include <dt-bindings/input/input.h> |
| 8 |
#include <dt-bindings/leds/common.h> |
| 9 |
#include "px30-firefly-jd4-core.dtsi" |
| 10 |
|
| 11 |
/ { |
| 12 |
compatible = "firefly,px30-jd4-core-mb", "firefly,px30-jd4-core", |
| 13 |
"rockchip,px30"; |
| 14 |
model = "Firefly Core-PX30-JD4 on MB-JD4-PX30 baseboard"; |
| 15 |
|
| 16 |
aliases { |
| 17 |
ethernet0 = &gmac; |
| 18 |
mmc0 = &sdmmc; |
| 19 |
mmc1 = &sdio; |
| 20 |
mmc2 = &emmc; |
| 21 |
}; |
| 22 |
|
| 23 |
chosen { |
| 24 |
stdout-path = "serial2:115200n8"; |
| 25 |
}; |
| 26 |
|
| 27 |
dc_12v: regulator-dc-12v { |
| 28 |
compatible = "regulator-fixed"; |
| 29 |
regulator-name = "dc_12v"; |
| 30 |
regulator-always-on; |
| 31 |
regulator-boot-on; |
| 32 |
regulator-min-microvolt = <12000000>; |
| 33 |
regulator-max-microvolt = <12000000>; |
| 34 |
}; |
| 35 |
|
| 36 |
adc-keys { |
| 37 |
compatible = "adc-keys"; |
| 38 |
io-channels = <&saradc 2>; |
| 39 |
io-channel-names = "buttons"; |
| 40 |
keyup-threshold-microvolt = <1500000>; |
| 41 |
poll-interval = <100>; |
| 42 |
|
| 43 |
button-recovery { |
| 44 |
label = "Recovery"; |
| 45 |
linux,code = <KEY_VENDOR>; |
| 46 |
press-threshold-microvolt = <18000>; |
| 47 |
}; |
| 48 |
}; |
| 49 |
|
| 50 |
leds { |
| 51 |
compatible = "gpio-leds"; |
| 52 |
pinctrl-names = "default"; |
| 53 |
pinctrl-0 = <&blue_led>, <&green_led>; |
| 54 |
|
| 55 |
blue-led { |
| 56 |
color = <LED_COLOR_ID_BLUE>; |
| 57 |
default-state = "on"; |
| 58 |
function = LED_FUNCTION_HEARTBEAT; |
| 59 |
gpios = <&gpio1 RK_PB5 GPIO_ACTIVE_HIGH>; |
| 60 |
label = "px30-mb-jd4:blue:work"; |
| 61 |
linux,default-trigger = "heartbeat"; |
| 62 |
}; |
| 63 |
|
| 64 |
green-led { |
| 65 |
color = <LED_COLOR_ID_GREEN>; |
| 66 |
default-state = "on"; |
| 67 |
function = LED_FUNCTION_POWER; |
| 68 |
gpios = <&gpio1 RK_PB4 GPIO_ACTIVE_HIGH>; |
| 69 |
label = "px30-mb-jd4:blue:diy"; |
| 70 |
linux,default-trigger = "default-on"; |
| 71 |
}; |
| 72 |
}; |
| 73 |
|
| 74 |
sdio_pwrseq: sdio-pwrseq { |
| 75 |
compatible = "mmc-pwrseq-simple"; |
| 76 |
pinctrl-names = "default"; |
| 77 |
pinctrl-0 = <&wifi_enable_h>; |
| 78 |
|
| 79 |
/* |
| 80 |
* On the module itself this is one of these (depending |
| 81 |
* on the actual card populated): |
| 82 |
* - SDIO_RESET_L_WL_REG_ON |
| 83 |
* - PDN (power down when low) |
| 84 |
*/ |
| 85 |
reset-gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_LOW>; /* GPIO3_A4 */ |
| 86 |
}; |
| 87 |
|
| 88 |
vcc5v0_baseboard: regulator-vcc5v0-baseboard { |
| 89 |
compatible = "regulator-fixed"; |
| 90 |
regulator-name = "vcc5v0_baseboard"; |
| 91 |
regulator-always-on; |
| 92 |
regulator-boot-on; |
| 93 |
regulator-min-microvolt = <5000000>; |
| 94 |
regulator-max-microvolt = <5000000>; |
| 95 |
vin-supply = <&dc_12v>; |
| 96 |
}; |
| 97 |
}; |
| 98 |
|
| 99 |
&gmac { |
| 100 |
clock_in_out = "output"; |
| 101 |
phy-supply = <&vcc_rmii>; |
| 102 |
snps,reset-gpio = <&gpio2 13 GPIO_ACTIVE_LOW>; |
| 103 |
snps,reset-active-low; |
| 104 |
snps,reset-delays-us = <0 50000 50000>; |
| 105 |
status = "okay"; |
| 106 |
}; |
| 107 |
|
| 108 |
&pinctrl { |
| 109 |
leds { |
| 110 |
blue_led: blue-led { |
| 111 |
rockchip,pins = <1 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>; |
| 112 |
}; |
| 113 |
|
| 114 |
green_led: green-led { |
| 115 |
rockchip,pins = <1 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>; |
| 116 |
}; |
| 117 |
}; |
| 118 |
|
| 119 |
sdio-pwrseq { |
| 120 |
wifi_enable_h: wifi-enable-h { |
| 121 |
rockchip,pins = |
| 122 |
<0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>; |
| 123 |
}; |
| 124 |
}; |
| 125 |
}; |
| 126 |
|
| 127 |
&sdmmc { |
| 128 |
bus-width = <4>; |
| 129 |
cap-mmc-highspeed; |
| 130 |
cap-sd-highspeed; |
| 131 |
card-detect-delay = <800>; |
| 132 |
sd-uhs-sdr12; |
| 133 |
sd-uhs-sdr25; |
| 134 |
sd-uhs-sdr50; |
| 135 |
sd-uhs-sdr104; |
| 136 |
vmmc-supply = <&vcc_sd>; |
| 137 |
vqmmc-supply = <&vccio_sd>; |
| 138 |
status = "okay"; |
| 139 |
}; |
| 140 |
|
| 141 |
&sdio { |
| 142 |
bus-width = <4>; |
| 143 |
cap-sd-highspeed; |
| 144 |
keep-power-in-suspend; |
| 145 |
non-removable; |
| 146 |
mmc-pwrseq = <&sdio_pwrseq>; |
| 147 |
sd-uhs-sdr104; |
| 148 |
status = "okay"; |
| 149 |
}; |
| 150 |
|
| 151 |
&u2phy { |
| 152 |
status = "okay"; |
| 153 |
|
| 154 |
u2phy_host: host-port { |
| 155 |
status = "okay"; |
| 156 |
}; |
| 157 |
|
| 158 |
u2phy_otg: otg-port { |
| 159 |
status = "okay"; |
| 160 |
}; |
| 161 |
}; |
| 162 |
|
| 163 |
&uart2 { |
| 164 |
pinctrl-names = "default"; |
| 165 |
pinctrl-0 = <&uart2m1_xfer>; |
| 166 |
status = "okay"; |
| 167 |
}; |
| 168 |
|
| 169 |
&usb20_otg { |
| 170 |
status = "okay"; |
| 171 |
}; |
| 172 |
|
| 173 |
&usb_host0_ehci { |
| 174 |
status = "okay"; |
| 175 |
}; |
| 176 |
|
| 177 |
&usb_host0_ohci { |
| 178 |
status = "okay"; |
| 179 |
}; |