| 1 |
// SPDX-License-Identifier: (GPL-2.0+ OR MIT) |
| 2 |
/* |
| 3 |
* Copyright (c) 2020 Engicam srl |
| 4 |
* Copyright (c) 2020 Amarula Solutions |
| 5 |
* Copyright (c) 2020 Amarula Solutions(India) |
| 6 |
*/ |
| 7 |
|
| 8 |
/ { |
| 9 |
aliases { |
| 10 |
ethernet0 = &gmac; |
| 11 |
mmc1 = &sdmmc; |
| 12 |
mmc2 = &sdio; |
| 13 |
}; |
| 14 |
|
| 15 |
vcc5v0_sys: regulator-vcc5v0-sys { |
| 16 |
compatible = "regulator-fixed"; |
| 17 |
regulator-name = "vcc5v0_sys"; /* +5V */ |
| 18 |
regulator-always-on; |
| 19 |
regulator-boot-on; |
| 20 |
regulator-min-microvolt = <5000000>; |
| 21 |
regulator-max-microvolt = <5000000>; |
| 22 |
}; |
| 23 |
|
| 24 |
sdio_pwrseq: sdio-pwrseq { |
| 25 |
compatible = "mmc-pwrseq-simple"; |
| 26 |
clocks = <&xin32k>; |
| 27 |
clock-names = "ext_clock"; |
| 28 |
post-power-on-delay-ms = <80>; |
| 29 |
pinctrl-names = "default"; |
| 30 |
pinctrl-0 = <&wifi_enable_h>; |
| 31 |
}; |
| 32 |
|
| 33 |
vcc3v3_btreg: vcc3v3-btreg { |
| 34 |
compatible = "regulator-fixed"; |
| 35 |
enable-active-high; |
| 36 |
pinctrl-names = "default"; |
| 37 |
pinctrl-0 = <&bt_enable_h>; |
| 38 |
regulator-name = "btreg-gpio-supply"; |
| 39 |
regulator-min-microvolt = <3300000>; |
| 40 |
regulator-max-microvolt = <3300000>; |
| 41 |
regulator-always-on; |
| 42 |
}; |
| 43 |
|
| 44 |
vcc3v3_rf_aux_mod: regulator-vcc3v3-rf-aux-mod { |
| 45 |
compatible = "regulator-fixed"; |
| 46 |
regulator-name = "vcc3v3_rf_aux_mod"; |
| 47 |
regulator-min-microvolt = <3300000>; |
| 48 |
regulator-max-microvolt = <3300000>; |
| 49 |
regulator-always-on; |
| 50 |
regulator-boot-on; |
| 51 |
vin-supply = <&vcc5v0_sys>; |
| 52 |
}; |
| 53 |
|
| 54 |
xin32k: xin32k { |
| 55 |
compatible = "fixed-clock"; |
| 56 |
#clock-cells = <0>; |
| 57 |
clock-frequency = <32768>; |
| 58 |
clock-output-names = "xin32k"; |
| 59 |
}; |
| 60 |
}; |
| 61 |
|
| 62 |
&sdio { |
| 63 |
#address-cells = <1>; |
| 64 |
#size-cells = <0>; |
| 65 |
bus-width = <4>; |
| 66 |
clock-frequency = <50000000>; |
| 67 |
cap-sdio-irq; |
| 68 |
cap-sd-highspeed; |
| 69 |
keep-power-in-suspend; |
| 70 |
mmc-pwrseq = <&sdio_pwrseq>; |
| 71 |
non-removable; |
| 72 |
sd-uhs-sdr104; |
| 73 |
status = "okay"; |
| 74 |
|
| 75 |
brcmf: wifi@1 { |
| 76 |
compatible = "brcm,bcm4329-fmac"; |
| 77 |
reg = <1>; |
| 78 |
}; |
| 79 |
}; |
| 80 |
|
| 81 |
&gmac { |
| 82 |
clock_in_out = "output"; |
| 83 |
phy-supply = <&vcc_3v3>; /* +3V3_SOM */ |
| 84 |
snps,reset-active-low; |
| 85 |
snps,reset-delays-us = <0 50000 50000>; |
| 86 |
snps,reset-gpio = <&gpio2 RK_PB5 GPIO_ACTIVE_HIGH>; |
| 87 |
status = "okay"; |
| 88 |
}; |
| 89 |
|
| 90 |
&pwm0 { |
| 91 |
status = "okay"; |
| 92 |
}; |
| 93 |
|
| 94 |
&sdmmc { |
| 95 |
cap-sd-highspeed; |
| 96 |
card-detect-delay = <800>; |
| 97 |
vmmc-supply = <&vcc_3v3>; /* +3V3_SOM */ |
| 98 |
vqmmc-supply = <&vcc_3v3>; |
| 99 |
status = "okay"; |
| 100 |
}; |
| 101 |
|
| 102 |
&u2phy { |
| 103 |
status = "okay"; |
| 104 |
|
| 105 |
u2phy_host: host-port { |
| 106 |
status = "okay"; |
| 107 |
}; |
| 108 |
|
| 109 |
u2phy_otg: otg-port { |
| 110 |
status = "okay"; |
| 111 |
}; |
| 112 |
}; |
| 113 |
|
| 114 |
&uart2 { |
| 115 |
pinctrl-0 = <&uart2m1_xfer>; |
| 116 |
status = "okay"; |
| 117 |
}; |
| 118 |
|
| 119 |
&usb20_otg { |
| 120 |
status = "okay"; |
| 121 |
}; |
| 122 |
|
| 123 |
&usb_host0_ehci { |
| 124 |
status = "okay"; |
| 125 |
}; |
| 126 |
|
| 127 |
&usb_host0_ohci { |
| 128 |
status = "okay"; |
| 129 |
}; |