Debian Codegraph @

scripts/dtc/include-prefixes/arm64/rockchip/px30-cobra.dtsi

raw
1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
2 /*
3 * Copyright (c) 2025 Cherry Embedded Solutions GmbH
4 */
5
6 /dts-v1/;
7 #include <dt-bindings/gpio/gpio.h>
8 #include <dt-bindings/input/input.h>
9 #include <dt-bindings/leds/common.h>
10 #include <dt-bindings/pinctrl/rockchip.h>
11 #include "px30.dtsi"
12
13 / {
14 aliases {
15 ethernet0 = &gmac;
16 mmc0 = &emmc;
17 };
18
19 chosen {
20 stdout-path = "serial5:115200n8";
21 };
22
23 backlight: backlight {
24 compatible = "pwm-backlight";
25 power-supply = <&vcc5v0_sys>;
26 pwms = <&pwm0 0 25000 0>;
27 };
28
29 beeper {
30 compatible = "pwm-beeper";
31 pwms = <&pwm1 0 1000 0>;
32 };
33
34 emmc_pwrseq: emmc-pwrseq {
35 compatible = "mmc-pwrseq-emmc";
36 pinctrl-0 = <&emmc_reset>;
37 pinctrl-names = "default";
38 reset-gpios = <&gpio1 RK_PB3 GPIO_ACTIVE_HIGH>;
39 };
40
41 gpio-leds {
42 compatible = "gpio-leds";
43 pinctrl-names = "default";
44 pinctrl-0 = <&heartbeat_led_pin>;
45
46 /*
47 * LED14 on the PCB. Typically NOT populated.
48 */
49 led-0 {
50 color = <LED_COLOR_ID_BLUE>;
51 gpios = <&gpio0 RK_PA0 GPIO_ACTIVE_HIGH>;
52 label = "heartbeat";
53 linux,default-trigger = "heartbeat";
54 };
55 };
56
57 pwm-leds {
58 compatible = "pwm-leds";
59
60 ring_red: led-0 {
61 color = <LED_COLOR_ID_RED>;
62 default-state = "off";
63 label = "ring_red";
64 pwms = <&pwm5 0 1000000 0>;
65 max-brightness = <255>;
66 };
67
68 ring_green: led-1 {
69 color = <LED_COLOR_ID_GREEN>;
70 default-state = "off";
71 label = "ring_green";
72 pwms = <&pwm6 0 1000000 0>;
73 max-brightness = <255>;
74 };
75
76 ring_blue: led-2 {
77 color = <LED_COLOR_ID_BLUE>;
78 default-state = "off";
79 label = "ring_blue";
80 pwms = <&pwm7 0 1000000 0>;
81 max-brightness = <255>;
82 };
83 };
84
85 /* also named 5V_Q7 in schematics */
86 vcc5v0_sys: regulator-vccsys {
87 compatible = "regulator-fixed";
88 regulator-name = "vcc5v0_sys";
89 regulator-always-on;
90 regulator-boot-on;
91 regulator-min-microvolt = <5000000>;
92 regulator-max-microvolt = <5000000>;
93 };
94 };
95
96 &cpu0 {
97 cpu-supply = <&vdd_arm>;
98 };
99
100 &cpu1 {
101 cpu-supply = <&vdd_arm>;
102 };
103
104 &cpu2 {
105 cpu-supply = <&vdd_arm>;
106 };
107
108 &cpu3 {
109 cpu-supply = <&vdd_arm>;
110 };
111
112 &display_subsystem {
113 status = "okay";
114 };
115
116 &dsi_dphy {
117 status = "okay";
118 };
119
120 &emmc {
121 bus-width = <8>;
122 cap-mmc-highspeed;
123 /*
124 * For hs200 support, U-Boot would have to set the RK809 DCDC4
125 * rail to 1.8V from the default of 3.0V. It doesn't do that on
126 * devices out in the field, so disable hs200.
127 * mmc-hs200-1_8v;
128 */
129 mmc-pwrseq = <&emmc_pwrseq>;
130 non-removable;
131 vmmc-supply = <&vcc_3v3>;
132 vqmmc-supply = <&vcc_emmc>;
133 status = "okay";
134 };
135
136 &gmac {
137 clock_in_out = "output";
138 phy-handle = <&dp83825>;
139 phy-supply = <&vcc_3v3>;
140 status = "okay";
141 };
142
143 &gpu {
144 mali-supply = <&vdd_log>;
145 status = "okay";
146 };
147
148 /* I2C0 = PMIC, STUSB4500, RTC */
149 &i2c0 {
150 status = "okay";
151
152 rk809: pmic@20 {
153 compatible = "rockchip,rk809";
154 reg = <0x20>;
155 #clock-cells = <0>;
156 clock-output-names = "xin32k";
157 interrupt-parent = <&gpio0>;
158 interrupts = <RK_PA7 IRQ_TYPE_LEVEL_LOW>;
159 pinctrl-names = "default";
160 pinctrl-0 = <&pmic_int>;
161 system-power-controller;
162 wakeup-source;
163
164 vcc1-supply = <&vcc5v0_sys>;
165 vcc2-supply = <&vcc5v0_sys>;
166 vcc3-supply = <&vcc5v0_sys>;
167 vcc4-supply = <&vcc5v0_sys>;
168 vcc5-supply = <&vcc_3v3>;
169 vcc6-supply = <&vcc_3v3>;
170 vcc7-supply = <&vcc_3v3>;
171 vcc9-supply = <&vcc5v0_sys>;
172
173 regulators {
174 vdd_log: DCDC_REG1 {
175 regulator-name = "vdd_log";
176 regulator-always-on;
177 regulator-boot-on;
178 regulator-min-microvolt = <950000>;
179 regulator-max-microvolt = <1350000>;
180 regulator-ramp-delay = <6001>;
181
182 regulator-state-mem {
183 regulator-on-in-suspend;
184 regulator-suspend-microvolt = <950000>;
185 };
186 };
187
188 vdd_arm: DCDC_REG2 {
189 regulator-name = "vdd_arm";
190 regulator-always-on;
191 regulator-boot-on;
192 regulator-min-microvolt = <950000>;
193 regulator-max-microvolt = <1350000>;
194 regulator-ramp-delay = <6001>;
195
196 regulator-state-mem {
197 regulator-off-in-suspend;
198 regulator-suspend-microvolt = <950000>;
199 };
200 };
201
202 vcc_ddr: DCDC_REG3 {
203 regulator-name = "vcc_ddr";
204 regulator-always-on;
205 regulator-boot-on;
206
207 regulator-state-mem {
208 regulator-on-in-suspend;
209 };
210 };
211
212 vcc_3v0_1v8: vcc_emmc: DCDC_REG4 {
213 regulator-name = "vcc_3v0_1v8";
214 regulator-always-on;
215 regulator-boot-on;
216 regulator-min-microvolt = <3000000>;
217 regulator-max-microvolt = <3000000>;
218
219 regulator-state-mem {
220 regulator-on-in-suspend;
221 regulator-suspend-microvolt = <3000000>;
222 };
223 };
224
225 vcc_3v3: DCDC_REG5 {
226 regulator-name = "vcc_3v3";
227 regulator-always-on;
228 regulator-boot-on;
229 regulator-min-microvolt = <3300000>;
230 regulator-max-microvolt = <3300000>;
231
232 regulator-state-mem {
233 regulator-on-in-suspend;
234 regulator-suspend-microvolt = <3300000>;
235 };
236 };
237
238 vcc_1v8: LDO_REG2 {
239 regulator-name = "vcc_1v8";
240 regulator-always-on;
241 regulator-boot-on;
242 regulator-min-microvolt = <1800000>;
243 regulator-max-microvolt = <1800000>;
244
245 regulator-state-mem {
246 regulator-on-in-suspend;
247 regulator-suspend-microvolt = <1800000>;
248 };
249 };
250
251 vcc_1v0: LDO_REG3 {
252 regulator-name = "vcc_1v0";
253 regulator-always-on;
254 regulator-boot-on;
255 regulator-min-microvolt = <1000000>;
256 regulator-max-microvolt = <1000000>;
257
258 regulator-state-mem {
259 regulator-on-in-suspend;
260 regulator-suspend-microvolt = <1000000>;
261 };
262 };
263
264 vcc_2v8: LDO_REG4 {
265 regulator-name = "vcc_2v8";
266 regulator-always-on;
267 regulator-boot-on;
268 regulator-min-microvolt = <2800000>;
269 regulator-max-microvolt = <2800000>;
270
271 regulator-state-mem {
272 regulator-off-in-suspend;
273 regulator-suspend-microvolt = <2800000>;
274 };
275 };
276
277 /*
278 * vccio_sd also supplies the vmmc supply on prototypes
279 * with sd-slots, so needs to stay single voltage for
280 * those. Production models don't have sd-slots anymore
281 * and only supply vccio2 from this regulator.
282 */
283 vccio_sd: LDO_REG5 {
284 regulator-name = "vccio_sd";
285 regulator-always-on;
286 regulator-boot-on;
287 regulator-min-microvolt = <3000000>;
288 regulator-max-microvolt = <3000000>;
289
290 regulator-state-mem {
291 regulator-on-in-suspend;
292 regulator-suspend-microvolt = <3000000>;
293 };
294 };
295
296 /* vcc_sdio also supplies the pull-up resistors for i2c1 */
297 vcc_sdio: LDO_REG6 {
298 regulator-name = "vcc_sdio";
299 regulator-always-on;
300 regulator-boot-on;
301 regulator-min-microvolt = <3000000>;
302 regulator-max-microvolt = <3000000>;
303
304 regulator-state-mem {
305 regulator-on-in-suspend;
306 regulator-suspend-microvolt = <3300000>;
307 };
308 };
309
310 vcc_lcd: LDO_REG7 {
311 regulator-name = "vcc_lcd";
312 regulator-always-on;
313 regulator-boot-on;
314 regulator-min-microvolt = <1000000>;
315 regulator-max-microvolt = <1000000>;
316
317 regulator-state-mem {
318 regulator-off-in-suspend;
319 regulator-suspend-microvolt = <1000000>;
320 };
321 };
322
323 vcc_1v8_lcd: LDO_REG8 {
324 regulator-name = "vcc_1v8_lcd";
325 regulator-always-on;
326 regulator-boot-on;
327 regulator-min-microvolt = <1800000>;
328 regulator-max-microvolt = <1800000>;
329
330 regulator-state-mem {
331 regulator-on-in-suspend;
332 regulator-suspend-microvolt = <1800000>;
333 };
334 };
335
336 vcca_1v8: LDO_REG9 {
337 regulator-name = "vcca_1v8";
338 regulator-always-on;
339 regulator-boot-on;
340 regulator-min-microvolt = <1800000>;
341 regulator-max-microvolt = <1800000>;
342
343 regulator-state-mem {
344 regulator-off-in-suspend;
345 regulator-suspend-microvolt = <1800000>;
346 };
347 };
348 };
349 };
350 };
351
352 &i2c1 {
353 clock-frequency = <100000>;
354 status = "okay";
355 };
356
357 &i2c2 {
358 clock-frequency = <100000>;
359 i2c-scl-falling-time-ns = <50>;
360 i2c-scl-rising-time-ns = <300>;
361 status = "okay";
362
363 touchscreen@14 {
364 compatible = "goodix,gt911";
365 reg = <0x14>;
366 AVDD28-supply = <&vcc_2v8>;
367 interrupt-parent = <&gpio0>;
368 interrupts = <RK_PA1 IRQ_TYPE_LEVEL_LOW>;
369 irq-gpios = <&gpio0 RK_PA1 GPIO_ACTIVE_HIGH>;
370 pinctrl-names = "default";
371 pinctrl-0 = <&tch_int &tch_rst>;
372 reset-gpios = <&gpio0 RK_PB5 GPIO_ACTIVE_HIGH>;
373 touchscreen-inverted-x;
374 VDDIO-supply = <&vcc_3v3>;
375 };
376 };
377
378 /*
379 * Enable pull-ups to prevent floating pins when the touch
380 * panel is not connected.
381 */
382 &i2c2_xfer {
383 rockchip,pins =
384 <2 RK_PB7 2 &pcfg_pull_up>,
385 <2 RK_PC0 2 &pcfg_pull_up>;
386 };
387
388 &io_domains {
389 vccio1-supply = <&vcc_sdio>;
390 vccio2-supply = <&vccio_sd>;
391 vccio3-supply = <&vcc_3v3>;
392 vccio4-supply = <&vcc_3v3>;
393 vccio5-supply = <&vcc_1v8>;
394 vccio6-supply = <&vcc_emmc>;
395 status = "okay";
396 };
397
398 &mdio {
399 dp83825: ethernet-phy@0 {
400 compatible = "ethernet-phy-ieee802.3-c22";
401 reg = <0x0>;
402 pinctrl-names = "default";
403 pinctrl-0 = <&phy_rst>;
404 reset-assert-us = <50000>;
405 reset-deassert-us = <50000>;
406 reset-gpios = <&gpio2 RK_PB6 GPIO_ACTIVE_LOW>;
407 };
408 };
409
410 &pinctrl {
411 pinctrl-names = "default";
412 pinctrl-0 = <&cobra_pin_hog>;
413
414 hog {
415 cobra_pin_hog: cobra-pin-hog {
416 rockchip,pins =
417 /* USB_HUB2_RESET */
418 <0 RK_PA5 RK_FUNC_GPIO &pcfg_output_high>,
419 /* USB_HUB1_RESET */
420 <0 RK_PB4 RK_FUNC_GPIO &pcfg_output_high>,
421 /* The default pull-down can keep the IC in reset. */
422 <3 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>,
423 /* USB-A 5V enable */
424 <3 RK_PC0 RK_FUNC_GPIO &pcfg_output_high>,
425 /* USB-A data enable */
426 <3 RK_PD3 RK_FUNC_GPIO &pcfg_output_high>;
427 };
428 };
429
430 emmc {
431 emmc_reset: emmc-reset {
432 rockchip,pins =
433 <1 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
434 };
435 };
436
437 ethernet {
438 phy_rst: phy-rst {
439 rockchip,pins =
440 <2 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>;
441 };
442 };
443
444 leds {
445 heartbeat_led_pin: heartbeat-led-pin {
446 rockchip,pins =
447 <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>;
448 };
449 };
450
451 panel {
452 dsp_rst: dsp-rst {
453 rockchip,pins =
454 <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_down>;
455 };
456
457 tch_int: tch-int {
458 rockchip,pins =
459 <0 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>;
460 };
461
462 tch_rst: tch-rst {
463 rockchip,pins =
464 <0 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
465 };
466 };
467
468 pmic {
469 pmic_int: pmic-int {
470 rockchip,pins =
471 <0 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up>;
472 };
473 };
474 };
475
476 &pmu_io_domains {
477 pmuio1-supply = <&vcc_3v3>;
478 pmuio2-supply = <&vcc_3v3>;
479 status = "okay";
480 };
481
482 &pwm0 {
483 status = "okay";
484 };
485
486 &pwm1 {
487 status = "okay";
488 };
489
490 &pwm5 {
491 status = "okay";
492 };
493
494 &pwm6 {
495 status = "okay";
496 };
497
498 &pwm7 {
499 status = "okay";
500 };
501
502 &saradc {
503 vref-supply = <&vcc_1v8>;
504 status = "okay";
505 };
506
507 &tsadc {
508 status = "okay";
509 };
510
511 &u2phy {
512 status = "okay";
513 };
514
515 &u2phy_host {
516 status = "okay";
517 };
518
519 &u2phy_otg {
520 status = "okay";
521 };
522
523 &uart1 {
524 /delete-property/ dmas;
525 /delete-property/ dma-names;
526 pinctrl-names = "default";
527 pinctrl-0 = <&uart1_xfer>;
528 status = "okay";
529 };
530
531 &uart5 {
532 pinctrl-0 = <&uart5_xfer>;
533 status = "okay";
534 };
535
536 &usb20_otg {
537 status = "okay";
538 };
539
540 &usb_host0_ehci {
541 status = "okay";
542 };
543
544 &usb_host0_ohci {
545 status = "okay";
546 };
547
548 &vopb {
549 status = "okay";
550 };
551
552 &vopb_mmu {
553 status = "okay";
554 };
555
556 &vopl {
557 status = "disabled";
558 };
559
560 &vopl_mmu {
561 status = "disabled";
562 };
563
564 &wdt {
565 status = "okay";
566 };