Debian Codegraph @

scripts/dtc/include-prefixes/arm64/rockchip/px30-cobra-ltk500hd1829.dts

raw
1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
2 /*
3 * Copyright (c) 2025 Cherry Embedded Solutions GmbH
4 */
5
6 /dts-v1/;
7 #include "px30-cobra.dtsi"
8
9 / {
10 model = "Theobroma Systems Cobra prototype with LTK500HD1829 Display";
11 compatible = "tsd,px30-cobra-ltk500hd1829", "tsd,px30-cobra", "rockchip,px30";
12
13 aliases {
14 mmc1 = &sdmmc;
15 };
16 };
17
18 &dsi {
19 #address-cells = <1>;
20 #size-cells = <0>;
21 status = "okay";
22
23 panel@0 {
24 compatible = "leadtek,ltk500hd1829";
25 reg = <0>;
26 backlight = <&backlight>;
27 iovcc-supply = <&vcc_1v8>;
28 pinctrl-names = "default";
29 pinctrl-0 = <&dsp_rst>;
30 reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>;
31 vcc-supply = <&vcc_2v8>;
32
33 port {
34 mipi_in_panel: endpoint {
35 remote-endpoint = <&mipi_out_panel>;
36 };
37 };
38 };
39 };
40
41 &dsi_out {
42 mipi_out_panel: endpoint {
43 remote-endpoint = <&mipi_in_panel>;
44 };
45 };
46
47 &pinctrl {
48 pinctrl-names = "default";
49 pinctrl-0 = <&cobra_pin_hog>, <&cobra_proto_hog>;
50
51 hog {
52 cobra_proto_hog: cobra-proto-hog {
53 rockchip,pins =
54 /* STUSB4500 open drain outout POWER_OK2, needs pull-up */
55 <3 RK_PB1 RK_FUNC_GPIO &pcfg_pull_up>,
56 /* STUSB4500 open drain outout POWER_OK3, needs pull-up */
57 <3 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>;
58 };
59 };
60 };
61
62 &sdmmc {
63 bus-width = <4>;
64 broken-cd;
65 cap-sd-highspeed;
66 pinctrl-names = "default";
67 pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_bus4>;
68 sd-uhs-sdr12;
69 sd-uhs-sdr25;
70 sd-uhs-sdr50;
71 sd-uhs-sdr104;
72 vmmc-supply = <&vccio_sd>;
73 vqmmc-supply = <&vccio_sd>;
74 status = "okay";
75 };