Debian Codegraph @

scripts/dtc/include-prefixes/arm64/qcom/x1e001de-devkit.dts

raw
1 // SPDX-License-Identifier: BSD-3-Clause
2 /*
3 * Copyright (c) 2024 Qualcomm Innovation Center, Inc. All rights reserved.
4 */
5
6 /dts-v1/;
7
8 #include <dt-bindings/gpio/gpio.h>
9 #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
10
11 #include "hamoa.dtsi"
12 #include "hamoa-pmics.dtsi"
13
14 / {
15 model = "Qualcomm Technologies, Inc. X1E001DE Snapdragon Devkit for Windows";
16 compatible = "qcom,x1e001de-devkit", "qcom,x1e001de", "qcom,x1e80100";
17
18 aliases {
19 serial0 = &uart21;
20 };
21
22 wcd938x: audio-codec {
23 compatible = "qcom,wcd9385-codec";
24
25 pinctrl-names = "default";
26 pinctrl-0 = <&wcd_default>;
27
28 qcom,micbias1-microvolt = <1800000>;
29 qcom,micbias2-microvolt = <1800000>;
30 qcom,micbias3-microvolt = <1800000>;
31 qcom,micbias4-microvolt = <1800000>;
32 qcom,mbhc-buttons-vthreshold-microvolt = <75000 150000 237000 500000 500000 500000 500000 500000>;
33 qcom,mbhc-headset-vthreshold-microvolt = <1700000>;
34 qcom,mbhc-headphone-vthreshold-microvolt = <50000>;
35 qcom,rx-device = <&wcd_rx>;
36 qcom,tx-device = <&wcd_tx>;
37
38 reset-gpios = <&tlmm 191 GPIO_ACTIVE_LOW>;
39
40 vdd-buck-supply = <&vreg_l15b_1p8>;
41 vdd-rxtx-supply = <&vreg_l15b_1p8>;
42 vdd-io-supply = <&vreg_l15b_1p8>;
43 vdd-mic-bias-supply = <&vreg_bob1>;
44
45 #sound-dai-cells = <1>;
46 };
47
48 chosen {
49 stdout-path = "serial0:115200n8";
50 };
51
52 pmic-glink {
53 compatible = "qcom,x1e80100-pmic-glink",
54 "qcom,sm8550-pmic-glink",
55 "qcom,pmic-glink";
56 #address-cells = <1>;
57 #size-cells = <0>;
58 orientation-gpios = <&tlmm 121 GPIO_ACTIVE_HIGH>,
59 <&tlmm 123 GPIO_ACTIVE_HIGH>,
60 <&tlmm 125 GPIO_ACTIVE_HIGH>;
61
62 /* Back panel port closer to the RJ45 connector */
63 connector@0 {
64 compatible = "usb-c-connector";
65 reg = <0>;
66 power-role = "dual";
67 data-role = "dual";
68
69 ports {
70 #address-cells = <1>;
71 #size-cells = <0>;
72
73 port@0 {
74 reg = <0>;
75
76 pmic_glink_ss0_hs_in: endpoint {
77 remote-endpoint = <&usb_1_ss0_dwc3_hs>;
78 };
79 };
80
81 port@1 {
82 reg = <1>;
83
84 pmic_glink_ss0_ss_in: endpoint {
85 remote-endpoint = <&retimer_ss0_ss_out>;
86 };
87 };
88
89 port@2 {
90 reg = <2>;
91
92 pmic_glink_ss0_con_sbu_in: endpoint {
93 remote-endpoint = <&retimer_ss0_con_sbu_out>;
94 };
95 };
96 };
97 };
98
99 /* Back panel port closer to the audio jack */
100 connector@1 {
101 compatible = "usb-c-connector";
102 reg = <1>;
103 power-role = "dual";
104 data-role = "host";
105
106 ports {
107 #address-cells = <1>;
108 #size-cells = <0>;
109
110 port@0 {
111 reg = <0>;
112
113 pmic_glink_ss1_hs_in: endpoint {
114 remote-endpoint = <&usb_1_ss1_dwc3_hs>;
115 };
116 };
117
118 port@1 {
119 reg = <1>;
120
121 pmic_glink_ss1_ss_in: endpoint {
122 remote-endpoint = <&retimer_ss1_ss_out>;
123 };
124 };
125
126 port@2 {
127 reg = <2>;
128
129 pmic_glink_ss1_con_sbu_in: endpoint {
130 remote-endpoint = <&retimer_ss1_con_sbu_out>;
131 };
132 };
133 };
134 };
135
136 /* Front panel port */
137 connector@2 {
138 compatible = "usb-c-connector";
139 reg = <2>;
140 power-role = "dual";
141 data-role = "host";
142
143 ports {
144 #address-cells = <1>;
145 #size-cells = <0>;
146
147 port@0 {
148 reg = <0>;
149
150 pmic_glink_ss2_hs_in: endpoint {
151 remote-endpoint = <&usb_1_ss2_dwc3_hs>;
152 };
153 };
154
155 port@1 {
156 reg = <1>;
157
158 pmic_glink_ss2_ss_in: endpoint {
159 remote-endpoint = <&retimer_ss2_ss_out>;
160 };
161 };
162
163 port@2 {
164 reg = <2>;
165
166 pmic_glink_ss2_con_sbu_in: endpoint {
167 remote-endpoint = <&retimer_ss2_con_sbu_out>;
168 };
169 };
170 };
171 };
172 };
173
174 reserved-memory {
175 linux,cma {
176 compatible = "shared-dma-pool";
177 size = <0x0 0x8000000>;
178 reusable;
179 linux,cma-default;
180 };
181 };
182
183 sound {
184 compatible = "qcom,x1e80100-sndcard";
185 model = "X1E001DE-DEVKIT";
186 audio-routing = "IN1_HPHL", "HPHL_OUT",
187 "IN2_HPHR", "HPHR_OUT",
188 "AMIC2", "MIC BIAS2",
189 "TX SWR_INPUT1", "ADC2_OUTPUT";
190
191 wcd-playback-dai-link {
192 link-name = "WCD Playback";
193
194 cpu {
195 sound-dai = <&q6apmbedai RX_CODEC_DMA_RX_0>;
196 };
197
198 codec {
199 sound-dai = <&wcd938x 0>, <&swr1 0>, <&lpass_rxmacro 0>;
200 };
201
202 platform {
203 sound-dai = <&q6apm>;
204 };
205 };
206
207 wcd-capture-dai-link {
208 link-name = "WCD Capture";
209
210 cpu {
211 sound-dai = <&q6apmbedai TX_CODEC_DMA_TX_3>;
212 };
213
214 codec {
215 sound-dai = <&wcd938x 1>, <&swr2 1>, <&lpass_txmacro 0>;
216 };
217
218 platform {
219 sound-dai = <&q6apm>;
220 };
221 };
222 };
223
224 vreg_nvme: regulator-nvme {
225 compatible = "regulator-fixed";
226
227 regulator-name = "VREG_NVME_3P3";
228 regulator-min-microvolt = <3300000>;
229 regulator-max-microvolt = <3300000>;
230
231 gpio = <&tlmm 18 GPIO_ACTIVE_HIGH>;
232 enable-active-high;
233
234 pinctrl-names = "default";
235 pinctrl-0 = <&nvme_reg_en>;
236
237 regulator-boot-on;
238 };
239
240 vreg_rtmr0_1p15: regulator-rtmr0-1p15 {
241 compatible = "regulator-fixed";
242
243 regulator-name = "VREG_RTMR0_1P15";
244 regulator-min-microvolt = <1150000>;
245 regulator-max-microvolt = <1150000>;
246
247 gpio = <&pmc8380_5_gpios 8 GPIO_ACTIVE_HIGH>;
248 enable-active-high;
249
250 pinctrl-0 = <&usb0_pwr_1p15_en>;
251 pinctrl-names = "default";
252
253 regulator-boot-on;
254 };
255
256 vreg_rtmr0_1p8: regulator-rtmr0-1p8 {
257 compatible = "regulator-fixed";
258
259 regulator-name = "VREG_RTMR0_1P8";
260 regulator-min-microvolt = <1800000>;
261 regulator-max-microvolt = <1800000>;
262
263 gpio = <&pm8550ve_9_gpios 8 GPIO_ACTIVE_HIGH>;
264 enable-active-high;
265
266 pinctrl-0 = <&usb0_1p8_reg_en>;
267 pinctrl-names = "default";
268
269 regulator-boot-on;
270 };
271
272 vreg_rtmr0_3p3: regulator-rtmr0-3p3 {
273 compatible = "regulator-fixed";
274
275 regulator-name = "VREG_RTMR0_3P3";
276 regulator-min-microvolt = <3300000>;
277 regulator-max-microvolt = <3300000>;
278
279 gpio = <&pm8550_gpios 11 GPIO_ACTIVE_HIGH>;
280 enable-active-high;
281
282 pinctrl-0 = <&usb0_3p3_reg_en>;
283 pinctrl-names = "default";
284
285 regulator-boot-on;
286 };
287
288 vreg_rtmr1_1p15: regulator-rtmr1-1p15 {
289 compatible = "regulator-fixed";
290
291 regulator-name = "VREG_RTMR1_1P15";
292 regulator-min-microvolt = <1150000>;
293 regulator-max-microvolt = <1150000>;
294
295 gpio = <&tlmm 188 GPIO_ACTIVE_HIGH>;
296 enable-active-high;
297
298 pinctrl-0 = <&rtmr1_1p15_reg_en>;
299 pinctrl-names = "default";
300
301 regulator-boot-on;
302 };
303
304 vreg_rtmr1_1p8: regulator-rtmr1-1p8 {
305 compatible = "regulator-fixed";
306
307 regulator-name = "VREG_RTMR1_1P8";
308 regulator-min-microvolt = <1800000>;
309 regulator-max-microvolt = <1800000>;
310
311 gpio = <&tlmm 175 GPIO_ACTIVE_HIGH>;
312 enable-active-high;
313
314 pinctrl-0 = <&rtmr1_1p8_reg_en>;
315 pinctrl-names = "default";
316
317 regulator-boot-on;
318 };
319
320 vreg_rtmr1_3p3: regulator-rtmr1-3p3 {
321 compatible = "regulator-fixed";
322
323 regulator-name = "VREG_RTMR1_3P3";
324 regulator-min-microvolt = <3300000>;
325 regulator-max-microvolt = <3300000>;
326
327 gpio = <&tlmm 186 GPIO_ACTIVE_HIGH>;
328 enable-active-high;
329
330 pinctrl-0 = <&rtmr1_3p3_reg_en>;
331 pinctrl-names = "default";
332
333 regulator-boot-on;
334 };
335
336 vreg_rtmr2_1p15: regulator-rtmr2-1p15 {
337 compatible = "regulator-fixed";
338
339 regulator-name = "VREG_RTMR2_1P15";
340 regulator-min-microvolt = <1150000>;
341 regulator-max-microvolt = <1150000>;
342
343 gpio = <&tlmm 189 GPIO_ACTIVE_HIGH>;
344 enable-active-high;
345
346 pinctrl-0 = <&rtmr2_1p15_reg_en>;
347 pinctrl-names = "default";
348
349 regulator-boot-on;
350 };
351
352 vreg_rtmr2_1p8: regulator-rtmr2-1p8 {
353 compatible = "regulator-fixed";
354
355 regulator-name = "VREG_RTMR2_1P8";
356 regulator-min-microvolt = <1800000>;
357 regulator-max-microvolt = <1800000>;
358
359 gpio = <&tlmm 126 GPIO_ACTIVE_HIGH>;
360 enable-active-high;
361
362 pinctrl-0 = <&rtmr2_1p8_reg_en>;
363 pinctrl-names = "default";
364
365 regulator-boot-on;
366 };
367
368 vreg_rtmr2_3p3: regulator-rtmr2-3p3 {
369 compatible = "regulator-fixed";
370
371 regulator-name = "VREG_RTMR2_3P3";
372 regulator-min-microvolt = <3300000>;
373 regulator-max-microvolt = <3300000>;
374
375 gpio = <&tlmm 187 GPIO_ACTIVE_HIGH>;
376 enable-active-high;
377
378 pinctrl-0 = <&rtmr2_3p3_reg_en>;
379 pinctrl-names = "default";
380
381 regulator-boot-on;
382 };
383
384 vph_pwr: regulator-vph-pwr {
385 compatible = "regulator-fixed";
386
387 regulator-name = "vph_pwr";
388 regulator-min-microvolt = <3700000>;
389 regulator-max-microvolt = <3700000>;
390
391 regulator-always-on;
392 regulator-boot-on;
393 };
394
395 vreg_wwan: regulator-wwan {
396 compatible = "regulator-fixed";
397
398 regulator-name = "SDX_VPH_PWR";
399 regulator-min-microvolt = <3300000>;
400 regulator-max-microvolt = <3300000>;
401
402 gpio = <&tlmm 221 GPIO_ACTIVE_HIGH>;
403 enable-active-high;
404
405 pinctrl-0 = <&wwan_sw_en>;
406 pinctrl-names = "default";
407
408 regulator-boot-on;
409 };
410 };
411
412 &apps_rsc {
413 regulators-0 {
414 compatible = "qcom,pm8550-rpmh-regulators";
415 qcom,pmic-id = "b";
416
417 vdd-bob1-supply = <&vph_pwr>;
418 vdd-bob2-supply = <&vph_pwr>;
419 vdd-l1-l4-l10-supply = <&vreg_s4c_1p8>;
420 vdd-l2-l13-l14-supply = <&vreg_bob1>;
421 vdd-l5-l16-supply = <&vreg_bob1>;
422 vdd-l6-l7-supply = <&vreg_bob2>;
423 vdd-l8-l9-supply = <&vreg_bob1>;
424 vdd-l12-supply = <&vreg_s5j_1p2>;
425 vdd-l15-supply = <&vreg_s4c_1p8>;
426 vdd-l17-supply = <&vreg_bob2>;
427
428 vreg_bob1: bob1 {
429 regulator-name = "vreg_bob1";
430 regulator-min-microvolt = <3008000>;
431 regulator-max-microvolt = <3960000>;
432 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
433 };
434
435 vreg_bob2: bob2 {
436 regulator-name = "vreg_bob2";
437 regulator-min-microvolt = <2504000>;
438 regulator-max-microvolt = <3008000>;
439 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
440 };
441
442 vreg_l1b_1p8: ldo1 {
443 regulator-name = "vreg_l1b_1p8";
444 regulator-min-microvolt = <1800000>;
445 regulator-max-microvolt = <1800000>;
446 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
447 };
448
449 vreg_l2b_3p0: ldo2 {
450 regulator-name = "vreg_l2b_3p0";
451 regulator-min-microvolt = <3072000>;
452 regulator-max-microvolt = <3100000>;
453 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
454 };
455
456 vreg_l4b_1p8: ldo4 {
457 regulator-name = "vreg_l4b_1p8";
458 regulator-min-microvolt = <1800000>;
459 regulator-max-microvolt = <1800000>;
460 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
461 };
462
463 vreg_l5b_3p0: ldo5 {
464 regulator-name = "vreg_l5b_3p0";
465 regulator-min-microvolt = <3000000>;
466 regulator-max-microvolt = <3000000>;
467 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
468 };
469
470 vreg_l6b_1p8: ldo6 {
471 regulator-name = "vreg_l6b_1p8";
472 regulator-min-microvolt = <1800000>;
473 regulator-max-microvolt = <2960000>;
474 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
475 };
476
477 vreg_l7b_2p8: ldo7 {
478 regulator-name = "vreg_l7b_2p8";
479 regulator-min-microvolt = <2800000>;
480 regulator-max-microvolt = <2800000>;
481 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
482 };
483
484 vreg_l8b_3p0: ldo8 {
485 regulator-name = "vreg_l8b_3p0";
486 regulator-min-microvolt = <3072000>;
487 regulator-max-microvolt = <3072000>;
488 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
489 };
490
491 vreg_l9b_2p9: ldo9 {
492 regulator-name = "vreg_l9b_2p9";
493 regulator-min-microvolt = <2960000>;
494 regulator-max-microvolt = <2960000>;
495 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
496 };
497
498 vreg_l10b_1p8: ldo10 {
499 regulator-name = "vreg_l10b_1p8";
500 regulator-min-microvolt = <1800000>;
501 regulator-max-microvolt = <1800000>;
502 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
503 };
504
505 vreg_l12b_1p2: ldo12 {
506 regulator-name = "vreg_l12b_1p2";
507 regulator-min-microvolt = <1200000>;
508 regulator-max-microvolt = <1200000>;
509 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
510 regulator-always-on;
511 };
512
513 vreg_l13b_3p0: ldo13 {
514 regulator-name = "vreg_l13b_3p0";
515 regulator-min-microvolt = <3072000>;
516 regulator-max-microvolt = <3100000>;
517 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
518 };
519
520 vreg_l14b_3p0: ldo14 {
521 regulator-name = "vreg_l14b_3p0";
522 regulator-min-microvolt = <3072000>;
523 regulator-max-microvolt = <3072000>;
524 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
525 };
526
527 vreg_l15b_1p8: ldo15 {
528 regulator-name = "vreg_l15b_1p8";
529 regulator-min-microvolt = <1800000>;
530 regulator-max-microvolt = <1800000>;
531 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
532 regulator-always-on;
533 };
534
535 vreg_l16b_2p9: ldo16 {
536 regulator-name = "vreg_l16b_2p9";
537 regulator-min-microvolt = <2912000>;
538 regulator-max-microvolt = <2912000>;
539 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
540 };
541
542 vreg_l17b_2p5: ldo17 {
543 regulator-name = "vreg_l17b_2p5";
544 regulator-min-microvolt = <2504000>;
545 regulator-max-microvolt = <2504000>;
546 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
547 };
548 };
549
550 regulators-1 {
551 compatible = "qcom,pm8550ve-rpmh-regulators";
552 qcom,pmic-id = "c";
553
554 vdd-l1-supply = <&vreg_s5j_1p2>;
555 vdd-l2-supply = <&vreg_s1f_0p7>;
556 vdd-l3-supply = <&vreg_s1f_0p7>;
557 vdd-s4-supply = <&vph_pwr>;
558
559 vreg_s4c_1p8: smps4 {
560 regulator-name = "vreg_s4c_1p8";
561 regulator-min-microvolt = <1856000>;
562 regulator-max-microvolt = <2000000>;
563 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
564 };
565
566 vreg_l1c_1p2: ldo1 {
567 regulator-name = "vreg_l1c_1p2";
568 regulator-min-microvolt = <1200000>;
569 regulator-max-microvolt = <1200000>;
570 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
571 };
572
573 vreg_l2c_0p8: ldo2 {
574 regulator-name = "vreg_l2c_0p8";
575 regulator-min-microvolt = <880000>;
576 regulator-max-microvolt = <920000>;
577 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
578 };
579
580 vreg_l3c_0p8: ldo3 {
581 regulator-name = "vreg_l3c_0p8";
582 regulator-min-microvolt = <880000>;
583 regulator-max-microvolt = <920000>;
584 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
585 };
586 };
587
588 regulators-2 {
589 compatible = "qcom,pmc8380-rpmh-regulators";
590 qcom,pmic-id = "d";
591
592 vdd-l1-supply = <&vreg_s1f_0p7>;
593 vdd-l2-supply = <&vreg_s1f_0p7>;
594 vdd-l3-supply = <&vreg_s4c_1p8>;
595 vdd-s1-supply = <&vph_pwr>;
596
597 vreg_l1d_0p8: ldo1 {
598 regulator-name = "vreg_l1d_0p8";
599 regulator-min-microvolt = <880000>;
600 regulator-max-microvolt = <920000>;
601 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
602 };
603
604 vreg_l2d_0p9: ldo2 {
605 regulator-name = "vreg_l2d_0p9";
606 regulator-min-microvolt = <912000>;
607 regulator-max-microvolt = <920000>;
608 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
609 };
610
611 vreg_l3d_1p8: ldo3 {
612 regulator-name = "vreg_l3d_1p8";
613 regulator-min-microvolt = <1800000>;
614 regulator-max-microvolt = <1800000>;
615 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
616 };
617 };
618
619 regulators-3 {
620 compatible = "qcom,pmc8380-rpmh-regulators";
621 qcom,pmic-id = "e";
622
623 vdd-l2-supply = <&vreg_s1f_0p7>;
624 vdd-l3-supply = <&vreg_s5j_1p2>;
625
626 vreg_l2e_0p8: ldo2 {
627 regulator-name = "vreg_l2e_0p8";
628 regulator-min-microvolt = <880000>;
629 regulator-max-microvolt = <920000>;
630 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
631 };
632
633 vreg_l3e_1p2: ldo3 {
634 regulator-name = "vreg_l3e_1p2";
635 regulator-min-microvolt = <1200000>;
636 regulator-max-microvolt = <1200000>;
637 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
638 };
639 };
640
641 regulators-4 {
642 compatible = "qcom,pmc8380-rpmh-regulators";
643 qcom,pmic-id = "f";
644
645 vdd-l1-supply = <&vreg_s5j_1p2>;
646 vdd-l2-supply = <&vreg_s5j_1p2>;
647 vdd-l3-supply = <&vreg_s5j_1p2>;
648 vdd-s1-supply = <&vph_pwr>;
649
650 vreg_s1f_0p7: smps1 {
651 regulator-name = "vreg_s1f_0p7";
652 regulator-min-microvolt = <700000>;
653 regulator-max-microvolt = <1100000>;
654 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
655 };
656
657 vreg_l1f_1p0: ldo1 {
658 regulator-name = "vreg_l1f_1p0";
659 regulator-min-microvolt = <1024000>;
660 regulator-max-microvolt = <1024000>;
661 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
662 };
663
664 vreg_l2f_1p0: ldo2 {
665 regulator-name = "vreg_l2f_1p0";
666 regulator-min-microvolt = <1024000>;
667 regulator-max-microvolt = <1024000>;
668 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
669 };
670
671 vreg_l3f_1p0: ldo3 {
672 regulator-name = "vreg_l3f_1p0";
673 regulator-min-microvolt = <1024000>;
674 regulator-max-microvolt = <1024000>;
675 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
676 };
677 };
678
679 regulators-6 {
680 compatible = "qcom,pm8550ve-rpmh-regulators";
681 qcom,pmic-id = "i";
682
683 vdd-l1-supply = <&vreg_s4c_1p8>;
684 vdd-l2-supply = <&vreg_s5j_1p2>;
685 vdd-l3-supply = <&vreg_s1f_0p7>;
686 vdd-s1-supply = <&vph_pwr>;
687 vdd-s2-supply = <&vph_pwr>;
688
689 vreg_s1i_0p9: smps1 {
690 regulator-name = "vreg_s1i_0p9";
691 regulator-min-microvolt = <900000>;
692 regulator-max-microvolt = <920000>;
693 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
694 };
695
696 vreg_s2i_1p0: smps2 {
697 regulator-name = "vreg_s2i_1p0";
698 regulator-min-microvolt = <1000000>;
699 regulator-max-microvolt = <1100000>;
700 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
701 };
702
703 vreg_l1i_1p8: ldo1 {
704 regulator-name = "vreg_l1i_1p8";
705 regulator-min-microvolt = <1800000>;
706 regulator-max-microvolt = <1800000>;
707 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
708 };
709
710 vreg_l2i_1p2: ldo2 {
711 regulator-name = "vreg_l2i_1p2";
712 regulator-min-microvolt = <1200000>;
713 regulator-max-microvolt = <1200000>;
714 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
715 };
716
717 vreg_l3i_0p8: ldo3 {
718 regulator-name = "vreg_l3i_0p8";
719 regulator-min-microvolt = <880000>;
720 regulator-max-microvolt = <920000>;
721 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
722 };
723 };
724
725 regulators-7 {
726 compatible = "qcom,pm8550ve-rpmh-regulators";
727 qcom,pmic-id = "j";
728
729 vdd-l1-supply = <&vreg_s1f_0p7>;
730 vdd-l2-supply = <&vreg_s5j_1p2>;
731 vdd-l3-supply = <&vreg_s1f_0p7>;
732 vdd-s5-supply = <&vph_pwr>;
733
734 vreg_s5j_1p2: smps5 {
735 regulator-name = "vreg_s5j_1p2";
736 regulator-min-microvolt = <1256000>;
737 regulator-max-microvolt = <1304000>;
738 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
739 };
740
741 vreg_l1j_0p8: ldo1 {
742 regulator-name = "vreg_l1j_0p8";
743 regulator-min-microvolt = <880000>;
744 regulator-max-microvolt = <920000>;
745 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
746 };
747
748 vreg_l2j_1p2: ldo2 {
749 regulator-name = "vreg_l2j_1p2";
750 regulator-min-microvolt = <1256000>;
751 regulator-max-microvolt = <1256000>;
752 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
753 };
754
755 vreg_l3j_0p8: ldo3 {
756 regulator-name = "vreg_l3j_0p8";
757 regulator-min-microvolt = <880000>;
758 regulator-max-microvolt = <920000>;
759 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
760 };
761 };
762 };
763
764 &gpu {
765 status = "okay";
766 };
767
768 &gpu_zap_shader {
769 firmware-name = "qcom/x1e80100/Thundercomm/DEVKIT/qcdxkmsuc8380.mbn";
770 };
771
772 &i2c1 {
773 clock-frequency = <400000>;
774
775 status = "okay";
776
777 typec-mux@8 {
778 compatible = "parade,ps8830";
779 reg = <0x08>;
780
781 clocks = <&rpmhcc RPMH_RF_CLK5>;
782
783 vdd-supply = <&vreg_rtmr2_1p15>;
784 vdd33-supply = <&vreg_rtmr2_3p3>;
785 vdd33-cap-supply = <&vreg_rtmr2_3p3>;
786 vddar-supply = <&vreg_rtmr2_1p15>;
787 vddat-supply = <&vreg_rtmr2_1p15>;
788 vddio-supply = <&vreg_rtmr2_1p8>;
789
790 reset-gpios = <&tlmm 185 GPIO_ACTIVE_LOW>;
791
792 pinctrl-0 = <&rtmr2_default>;
793 pinctrl-names = "default";
794
795 orientation-switch;
796 retimer-switch;
797
798 ports {
799 #address-cells = <1>;
800 #size-cells = <0>;
801
802 port@0 {
803 reg = <0>;
804
805 retimer_ss2_ss_out: endpoint {
806 remote-endpoint = <&pmic_glink_ss2_ss_in>;
807 };
808 };
809
810 port@1 {
811 reg = <1>;
812
813 retimer_ss2_ss_in: endpoint {
814 remote-endpoint = <&usb_1_ss2_qmpphy_out>;
815 };
816 };
817
818 port@2 {
819 reg = <2>;
820
821 retimer_ss2_con_sbu_out: endpoint {
822 remote-endpoint = <&pmic_glink_ss2_con_sbu_in>;
823 };
824 };
825 };
826 };
827 };
828
829 &i2c3 {
830 clock-frequency = <400000>;
831
832 status = "okay";
833
834 typec-mux@8 {
835 compatible = "parade,ps8830";
836 reg = <0x08>;
837
838 clocks = <&rpmhcc RPMH_RF_CLK3>;
839
840 vdd-supply = <&vreg_rtmr0_1p15>;
841 vdd33-supply = <&vreg_rtmr0_3p3>;
842 vdd33-cap-supply = <&vreg_rtmr0_3p3>;
843 vddar-supply = <&vreg_rtmr0_1p15>;
844 vddat-supply = <&vreg_rtmr0_1p15>;
845 vddio-supply = <&vreg_rtmr0_1p8>;
846
847 reset-gpios = <&pm8550_gpios 10 GPIO_ACTIVE_LOW>;
848
849 pinctrl-0 = <&rtmr0_default>;
850 pinctrl-names = "default";
851
852 retimer-switch;
853 orientation-switch;
854
855 ports {
856 #address-cells = <1>;
857 #size-cells = <0>;
858
859 port@0 {
860 reg = <0>;
861
862 retimer_ss0_ss_out: endpoint {
863 remote-endpoint = <&pmic_glink_ss0_ss_in>;
864 };
865 };
866
867 port@1 {
868 reg = <1>;
869
870 retimer_ss0_ss_in: endpoint {
871 remote-endpoint = <&usb_1_ss0_qmpphy_out>;
872 };
873 };
874
875 port@2 {
876 reg = <2>;
877
878 retimer_ss0_con_sbu_out: endpoint {
879 remote-endpoint = <&pmic_glink_ss0_con_sbu_in>;
880 };
881 };
882 };
883 };
884 };
885
886 &i2c5 {
887 clock-frequency = <400000>;
888
889 status = "okay";
890
891 eusb3_repeater: redriver@47 {
892 compatible = "nxp,ptn3222";
893 reg = <0x47>;
894 #phy-cells = <0>;
895
896 vdd3v3-supply = <&vreg_l13b_3p0>;
897 vdd1v8-supply = <&vreg_l4b_1p8>;
898
899 reset-gpios = <&tlmm 6 GPIO_ACTIVE_LOW>;
900
901 pinctrl-0 = <&eusb3_reset_n>;
902 pinctrl-names = "default";
903 };
904
905 eusb6_repeater: redriver@4f {
906 compatible = "nxp,ptn3222";
907 reg = <0x4f>;
908 #phy-cells = <0>;
909
910 vdd3v3-supply = <&vreg_l13b_3p0>;
911 vdd1v8-supply = <&vreg_l4b_1p8>;
912
913 reset-gpios = <&tlmm 184 GPIO_ACTIVE_LOW>;
914
915 pinctrl-0 = <&eusb6_reset_n>;
916 pinctrl-names = "default";
917 };
918 };
919
920 &i2c7 {
921 clock-frequency = <400000>;
922
923 status = "okay";
924
925 typec-mux@8 {
926 compatible = "parade,ps8830";
927 reg = <0x8>;
928
929 clocks = <&rpmhcc RPMH_RF_CLK4>;
930
931 vdd-supply = <&vreg_rtmr1_1p15>;
932 vdd33-supply = <&vreg_rtmr1_3p3>;
933 vdd33-cap-supply = <&vreg_rtmr1_3p3>;
934 vddar-supply = <&vreg_rtmr1_1p15>;
935 vddat-supply = <&vreg_rtmr1_1p15>;
936 vddio-supply = <&vreg_rtmr1_1p8>;
937
938 reset-gpios = <&tlmm 176 GPIO_ACTIVE_LOW>;
939
940 pinctrl-0 = <&rtmr1_default>;
941 pinctrl-names = "default";
942
943 retimer-switch;
944 orientation-switch;
945
946 ports {
947 #address-cells = <1>;
948 #size-cells = <0>;
949
950 port@0 {
951 reg = <0>;
952
953 retimer_ss1_ss_out: endpoint {
954 remote-endpoint = <&pmic_glink_ss1_ss_in>;
955 };
956 };
957
958 port@1 {
959 reg = <1>;
960
961 retimer_ss1_ss_in: endpoint {
962 remote-endpoint = <&usb_1_ss1_qmpphy_out>;
963 };
964 };
965
966 port@2 {
967 reg = <2>;
968
969 retimer_ss1_con_sbu_out: endpoint {
970 remote-endpoint = <&pmic_glink_ss1_con_sbu_in>;
971 };
972 };
973 };
974 };
975 };
976
977 &mdss {
978 status = "okay";
979 };
980
981 &mdss_dp0 {
982 status = "okay";
983 };
984
985 &mdss_dp0_out {
986 link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
987 };
988
989 &mdss_dp1 {
990 status = "okay";
991 };
992
993 &mdss_dp1_out {
994 link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
995 };
996
997 &mdss_dp2 {
998 status = "okay";
999 };
1000
1001 &mdss_dp2_out {
1002 link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
1003 };
1004
1005 &pcie4 {
1006 pinctrl-0 = <&pcie4_default>;
1007 pinctrl-names = "default";
1008
1009 status = "okay";
1010 };
1011
1012 &pcie4_phy {
1013 vdda-phy-supply = <&vreg_l3i_0p8>;
1014 vdda-pll-supply = <&vreg_l3e_1p2>;
1015
1016 status = "okay";
1017 };
1018
1019 &pcie4_port0 {
1020 reset-gpios = <&tlmm 146 GPIO_ACTIVE_LOW>;
1021 wake-gpios = <&tlmm 148 GPIO_ACTIVE_LOW>;
1022 };
1023
1024 &pcie5 {
1025 vddpe-3v3-supply = <&vreg_wwan>;
1026
1027 pinctrl-0 = <&pcie5_default>;
1028 pinctrl-names = "default";
1029
1030 status = "okay";
1031 };
1032
1033 &pcie5_phy {
1034 vdda-phy-supply = <&vreg_l3i_0p8>;
1035 vdda-pll-supply = <&vreg_l3e_1p2>;
1036
1037 status = "okay";
1038 };
1039
1040 &pcie5_port0 {
1041 reset-gpios = <&tlmm 149 GPIO_ACTIVE_LOW>;
1042 wake-gpios = <&tlmm 151 GPIO_ACTIVE_LOW>;
1043 };
1044
1045 &pcie6a {
1046 vddpe-3v3-supply = <&vreg_nvme>;
1047
1048 pinctrl-names = "default";
1049 pinctrl-0 = <&pcie6a_default>;
1050
1051 status = "okay";
1052 };
1053
1054 &pcie6a_phy {
1055 vdda-phy-supply = <&vreg_l1d_0p8>;
1056 vdda-pll-supply = <&vreg_l2j_1p2>;
1057
1058 status = "okay";
1059 };
1060
1061 &pcie6a_port0 {
1062 reset-gpios = <&tlmm 152 GPIO_ACTIVE_LOW>;
1063 wake-gpios = <&tlmm 154 GPIO_ACTIVE_LOW>;
1064 };
1065
1066 &pm8550_gpios {
1067 rtmr0_default: rtmr0-reset-n-active-state {
1068 pins = "gpio10";
1069 function = "normal";
1070 power-source = <1>; /* 1.8 V */
1071 bias-disable;
1072 input-disable;
1073 output-enable;
1074 };
1075
1076 usb0_3p3_reg_en: usb0-3p3-reg-en-state {
1077 pins = "gpio11";
1078 function = "normal";
1079 power-source = <1>; /* 1.8 V */
1080 bias-disable;
1081 input-disable;
1082 output-enable;
1083 };
1084 };
1085
1086 &pmc8380_5_gpios {
1087 usb0_pwr_1p15_en: usb0-pwr-1p15-en-state {
1088 pins = "gpio8";
1089 function = "normal";
1090 power-source = <1>; /* 1.8 V */
1091 bias-disable;
1092 input-disable;
1093 output-enable;
1094 };
1095 };
1096
1097 &pm8550ve_9_gpios {
1098 usb0_1p8_reg_en: usb0-1p8-reg-en-state {
1099 pins = "gpio8";
1100 function = "normal";
1101 power-source = <1>; /* 1.8 V */
1102 bias-disable;
1103 input-disable;
1104 output-enable;
1105 };
1106 };
1107
1108 &qupv3_0 {
1109 status = "okay";
1110 };
1111
1112 &qupv3_1 {
1113 status = "okay";
1114 };
1115
1116 &qupv3_2 {
1117 status = "okay";
1118 };
1119
1120 &remoteproc_adsp {
1121 firmware-name = "qcom/x1e80100/Thundercomm/DEVKIT/qcadsp8380.mbn",
1122 "qcom/x1e80100/Thundercomm/DEVKIT/adsp_dtbs.elf";
1123
1124 status = "okay";
1125 };
1126
1127 &remoteproc_cdsp {
1128 firmware-name = "qcom/x1e80100/Thundercomm/DEVKIT/qccdsp8380.mbn",
1129 "qcom/x1e80100/Thundercomm/DEVKIT/cdsp_dtbs.elf";
1130
1131 status = "okay";
1132 };
1133
1134 &sdhc_2 {
1135 cd-gpios = <&tlmm 71 GPIO_ACTIVE_LOW>;
1136 pinctrl-0 = <&sdc2_default &sdc2_card_det_n>;
1137 pinctrl-1 = <&sdc2_sleep &sdc2_card_det_n>;
1138 pinctrl-names = "default", "sleep";
1139 vmmc-supply = <&vreg_l9b_2p9>;
1140 vqmmc-supply = <&vreg_l6b_1p8>;
1141 bus-width = <4>;
1142 no-sdio;
1143 no-mmc;
1144 status = "okay";
1145 };
1146
1147 &smb2360_0 {
1148 status = "okay";
1149 };
1150
1151 &smb2360_0_eusb2_repeater {
1152 vdd18-supply = <&vreg_l3d_1p8>;
1153 vdd3-supply = <&vreg_l2b_3p0>;
1154 };
1155
1156 &smb2360_1 {
1157 status = "okay";
1158 };
1159
1160 &smb2360_1_eusb2_repeater {
1161 vdd18-supply = <&vreg_l3d_1p8>;
1162 vdd3-supply = <&vreg_l14b_3p0>;
1163 };
1164
1165 &smb2360_2 {
1166 status = "okay";
1167 };
1168
1169 &smb2360_2_eusb2_repeater {
1170 vdd18-supply = <&vreg_l3d_1p8>;
1171 vdd3-supply = <&vreg_l8b_3p0>;
1172 };
1173
1174 &swr1 {
1175 status = "okay";
1176
1177 /* WCD9385 RX */
1178 wcd_rx: codec@0,4 {
1179 compatible = "sdw20217010d00";
1180 reg = <0 4>;
1181 qcom,rx-port-mapping = <1 2 3 4 5>;
1182 };
1183 };
1184
1185 &swr2 {
1186 status = "okay";
1187
1188 /* WCD9385 TX */
1189 wcd_tx: codec@0,3 {
1190 compatible = "sdw20217010d00";
1191 reg = <0 3>;
1192 qcom,tx-port-mapping = <2 2 3 4>;
1193 };
1194 };
1195
1196 &tlmm {
1197 gpio-reserved-ranges = <44 4>; /* SPI (TPM) */
1198
1199 eusb3_reset_n: eusb3-reset-n-state {
1200 pins = "gpio6";
1201 function = "gpio";
1202 drive-strength = <2>;
1203 bias-disable;
1204 output-low;
1205 };
1206
1207 eusb6_reset_n: eusb6-reset-n-state {
1208 pins = "gpio184";
1209 function = "gpio";
1210 drive-strength = <2>;
1211 bias-disable;
1212 output-low;
1213 };
1214
1215 nvme_reg_en: nvme-reg-en-state {
1216 pins = "gpio18";
1217 function = "gpio";
1218 drive-strength = <2>;
1219 bias-disable;
1220 };
1221
1222 pcie4_default: pcie4-default-state {
1223 clkreq-n-pins {
1224 pins = "gpio147";
1225 function = "pcie4_clk";
1226 drive-strength = <2>;
1227 bias-pull-up;
1228 };
1229
1230 perst-n-pins {
1231 pins = "gpio146";
1232 function = "gpio";
1233 drive-strength = <2>;
1234 bias-disable;
1235 };
1236
1237 wake-n-pins {
1238 pins = "gpio148";
1239 function = "gpio";
1240 drive-strength = <2>;
1241 bias-pull-up;
1242 };
1243 };
1244
1245 pcie5_default: pcie5-default-state {
1246 clkreq-n-pins {
1247 pins = "gpio150";
1248 function = "pcie5_clk";
1249 drive-strength = <2>;
1250 bias-pull-up;
1251 };
1252
1253 perst-n-pins {
1254 pins = "gpio149";
1255 function = "gpio";
1256 drive-strength = <2>;
1257 bias-disable;
1258 };
1259
1260 wake-n-pins {
1261 pins = "gpio151";
1262 function = "gpio";
1263 drive-strength = <2>;
1264 bias-pull-up;
1265 };
1266 };
1267
1268 pcie6a_default: pcie6a-default-state {
1269 clkreq-n-pins {
1270 pins = "gpio153";
1271 function = "pcie6a_clk";
1272 drive-strength = <2>;
1273 bias-pull-up;
1274 };
1275
1276 perst-n-pins {
1277 pins = "gpio152";
1278 function = "gpio";
1279 drive-strength = <2>;
1280 bias-disable;
1281 };
1282
1283 wake-n-pins {
1284 pins = "gpio154";
1285 function = "gpio";
1286 drive-strength = <2>;
1287 bias-pull-up;
1288 };
1289 };
1290
1291 rtmr1_default: rtmr1-reset-n-active-state {
1292 pins = "gpio176";
1293 function = "gpio";
1294 drive-strength = <2>;
1295 bias-disable;
1296 };
1297
1298 rtmr2_default: rtmr2-reset-n-active-state {
1299 pins = "gpio185";
1300 function = "gpio";
1301 drive-strength = <2>;
1302 bias-disable;
1303 };
1304
1305 rtmr1_1p15_reg_en: rtmr1-1p15-reg-en-state {
1306 pins = "gpio188";
1307 function = "gpio";
1308 drive-strength = <2>;
1309 bias-disable;
1310 };
1311
1312 rtmr1_1p8_reg_en: rtmr1-1p8-reg-en-state {
1313 pins = "gpio175";
1314 function = "gpio";
1315 drive-strength = <2>;
1316 bias-disable;
1317 };
1318
1319 rtmr1_3p3_reg_en: rtmr1-3p3-reg-en-state {
1320 pins = "gpio186";
1321 function = "gpio";
1322 drive-strength = <2>;
1323 bias-disable;
1324 };
1325
1326 rtmr2_1p15_reg_en: rtmr2-1p15-reg-en-state {
1327 pins = "gpio189";
1328 function = "gpio";
1329 drive-strength = <2>;
1330 bias-disable;
1331 };
1332
1333 rtmr2_1p8_reg_en: rtmr2-1p8-reg-en-state {
1334 pins = "gpio126";
1335 function = "gpio";
1336 drive-strength = <2>;
1337 bias-disable;
1338 };
1339
1340 rtmr2_3p3_reg_en: rtmr2-3p3-reg-en-state {
1341 pins = "gpio187";
1342 function = "gpio";
1343 drive-strength = <2>;
1344 bias-disable;
1345 };
1346
1347 sdc2_card_det_n: sdc2-card-det-state {
1348 pins = "gpio71";
1349 function = "gpio";
1350 drive-strength = <2>;
1351 bias-pull-up;
1352 };
1353
1354 wcd_default: wcd-reset-n-active-state {
1355 pins = "gpio191";
1356 function = "gpio";
1357 drive-strength = <16>;
1358 bias-disable;
1359 output-low;
1360 };
1361
1362 wwan_sw_en: wwan-sw-en-state {
1363 pins = "gpio221";
1364 function = "gpio";
1365 drive-strength = <4>;
1366 bias-disable;
1367 };
1368 };
1369
1370 &uart21 {
1371 compatible = "qcom,geni-debug-uart";
1372 status = "okay";
1373 };
1374
1375 &usb_1_ss0_hsphy {
1376 vdd-supply = <&vreg_l3j_0p8>;
1377 vdda12-supply = <&vreg_l2j_1p2>;
1378
1379 phys = <&smb2360_0_eusb2_repeater>;
1380
1381 status = "okay";
1382 };
1383
1384 &usb_1_ss0_qmpphy {
1385 vdda-phy-supply = <&vreg_l2j_1p2>;
1386 vdda-pll-supply = <&vreg_l1j_0p8>;
1387
1388 status = "okay";
1389 };
1390
1391 &usb_1_ss0 {
1392 status = "okay";
1393 };
1394
1395 &usb_1_ss0_dwc3 {
1396 dr_mode = "otg";
1397 usb-role-switch;
1398 };
1399
1400 &usb_1_ss0_dwc3_hs {
1401 remote-endpoint = <&pmic_glink_ss0_hs_in>;
1402 };
1403
1404 &usb_1_ss0_qmpphy_out {
1405 remote-endpoint = <&retimer_ss0_ss_in>;
1406 };
1407
1408 &usb_1_ss1_hsphy {
1409 vdd-supply = <&vreg_l3j_0p8>;
1410 vdda12-supply = <&vreg_l2j_1p2>;
1411
1412 phys = <&smb2360_1_eusb2_repeater>;
1413
1414 status = "okay";
1415 };
1416
1417 &usb_1_ss1_qmpphy {
1418 vdda-phy-supply = <&vreg_l2j_1p2>;
1419 vdda-pll-supply = <&vreg_l2d_0p9>;
1420
1421 status = "okay";
1422 };
1423
1424 &usb_1_ss1 {
1425 status = "okay";
1426 };
1427
1428 &usb_1_ss1_dwc3 {
1429 dr_mode = "host";
1430 };
1431
1432 &usb_1_ss1_dwc3_hs {
1433 remote-endpoint = <&pmic_glink_ss1_hs_in>;
1434 };
1435
1436 &usb_1_ss1_qmpphy_out {
1437 remote-endpoint = <&retimer_ss1_ss_in>;
1438 };
1439
1440 &usb_1_ss2_hsphy {
1441 vdd-supply = <&vreg_l3j_0p8>;
1442 vdda12-supply = <&vreg_l2j_1p2>;
1443
1444 phys = <&smb2360_2_eusb2_repeater>;
1445
1446 status = "okay";
1447 };
1448
1449 &usb_1_ss2_qmpphy {
1450 vdda-phy-supply = <&vreg_l2j_1p2>;
1451 vdda-pll-supply = <&vreg_l2d_0p9>;
1452
1453 status = "okay";
1454 };
1455
1456 &usb_1_ss2 {
1457 status = "okay";
1458 };
1459
1460 &usb_1_ss2_dwc3 {
1461 dr_mode = "host";
1462 };
1463
1464 &usb_1_ss2_dwc3_hs {
1465 remote-endpoint = <&pmic_glink_ss2_hs_in>;
1466 };
1467
1468 &usb_1_ss2_qmpphy_out {
1469 remote-endpoint = <&retimer_ss2_ss_in>;
1470 };
1471
1472 &usb_mp {
1473 status = "okay";
1474 };
1475
1476 &usb_mp_hsphy0 {
1477 vdd-supply = <&vreg_l2e_0p8>;
1478 vdda12-supply = <&vreg_l3e_1p2>;
1479
1480 phys = <&eusb3_repeater>;
1481
1482 status = "okay";
1483 };
1484
1485 &usb_mp_hsphy1 {
1486 vdd-supply = <&vreg_l2e_0p8>;
1487 vdda12-supply = <&vreg_l3e_1p2>;
1488
1489 phys = <&eusb6_repeater>;
1490
1491 status = "okay";
1492 };
1493
1494 &usb_mp_qmpphy0 {
1495 vdda-phy-supply = <&vreg_l3e_1p2>;
1496 vdda-pll-supply = <&vreg_l3c_0p8>;
1497
1498 status = "okay";
1499 };
1500
1501 &usb_mp_qmpphy1 {
1502 vdda-phy-supply = <&vreg_l3e_1p2>;
1503 vdda-pll-supply = <&vreg_l3c_0p8>;
1504
1505 status = "okay";
1506 };