| 1 |
// SPDX-License-Identifier: BSD-3-Clause |
| 2 |
/* |
| 3 |
* Copyright (c) 2023, Linaro Limited |
| 4 |
*/ |
| 5 |
|
| 6 |
/dts-v1/; |
| 7 |
|
| 8 |
#include <dt-bindings/firmware/qcom,scm.h> |
| 9 |
#include <dt-bindings/leds/common.h> |
| 10 |
#include <dt-bindings/pinctrl/qcom,pmic-gpio.h> |
| 11 |
#include <dt-bindings/regulator/qcom,rpmh-regulator.h> |
| 12 |
#include <dt-bindings/sound/cs35l45.h> |
| 13 |
#include "sm8550.dtsi" |
| 14 |
#include "pm8010.dtsi" |
| 15 |
#include "pm8550.dtsi" |
| 16 |
#include "pm8550b.dtsi" |
| 17 |
#define PMK8550VE_SID 5 |
| 18 |
#include "pm8550ve.dtsi" |
| 19 |
#include "pm8550vs.dtsi" |
| 20 |
#include "pmk8550.dtsi" |
| 21 |
/* TODO: Only one SID of PMR735D seems accessible? */ |
| 22 |
|
| 23 |
/delete-node/ &hwfence_shbuf; |
| 24 |
/delete-node/ &mpss_mem; |
| 25 |
/delete-node/ &rmtfs_mem; |
| 26 |
/ { |
| 27 |
model = "Sony Xperia 1 V"; |
| 28 |
compatible = "sony,pdx234", "qcom,sm8550"; |
| 29 |
chassis-type = "handset"; |
| 30 |
|
| 31 |
aliases { |
| 32 |
i2c0 = &i2c0; |
| 33 |
i2c4 = &i2c4; |
| 34 |
i2c10 = &i2c10; |
| 35 |
i2c11 = &i2c11; |
| 36 |
i2c16 = &i2c_hub_2; |
| 37 |
serial0 = &uart7; |
| 38 |
}; |
| 39 |
|
| 40 |
chosen { |
| 41 |
stdout-path = "serial0:115200n8"; |
| 42 |
}; |
| 43 |
|
| 44 |
gpio-keys { |
| 45 |
compatible = "gpio-keys"; |
| 46 |
label = "gpio-keys"; |
| 47 |
|
| 48 |
pinctrl-0 = <&focus_n &snapshot_n &vol_down_n>; |
| 49 |
pinctrl-names = "default"; |
| 50 |
|
| 51 |
key-camera-focus { |
| 52 |
label = "Camera Focus"; |
| 53 |
linux,code = <KEY_CAMERA_FOCUS>; |
| 54 |
gpios = <&pm8550b_gpios 8 GPIO_ACTIVE_LOW>; |
| 55 |
debounce-interval = <15>; |
| 56 |
linux,can-disable; |
| 57 |
wakeup-source; |
| 58 |
}; |
| 59 |
|
| 60 |
key-camera-snapshot { |
| 61 |
label = "Camera Snapshot"; |
| 62 |
gpios = <&pm8550b_gpios 7 GPIO_ACTIVE_LOW>; |
| 63 |
linux,code = <KEY_CAMERA>; |
| 64 |
debounce-interval = <15>; |
| 65 |
linux,can-disable; |
| 66 |
wakeup-source; |
| 67 |
}; |
| 68 |
|
| 69 |
key-volume-down { |
| 70 |
label = "Volume Down"; |
| 71 |
linux,code = <KEY_VOLUMEDOWN>; |
| 72 |
gpios = <&pm8550_gpios 6 GPIO_ACTIVE_LOW>; |
| 73 |
debounce-interval = <15>; |
| 74 |
linux,can-disable; |
| 75 |
wakeup-source; |
| 76 |
}; |
| 77 |
}; |
| 78 |
|
| 79 |
pmic-glink { |
| 80 |
compatible = "qcom,sm8550-pmic-glink", "qcom,pmic-glink"; |
| 81 |
orientation-gpios = <&tlmm 11 GPIO_ACTIVE_HIGH>; |
| 82 |
#address-cells = <1>; |
| 83 |
#size-cells = <0>; |
| 84 |
|
| 85 |
connector@0 { |
| 86 |
compatible = "usb-c-connector"; |
| 87 |
reg = <0>; |
| 88 |
power-role = "dual"; |
| 89 |
data-role = "dual"; |
| 90 |
|
| 91 |
ports { |
| 92 |
#address-cells = <1>; |
| 93 |
#size-cells = <0>; |
| 94 |
|
| 95 |
port@0 { |
| 96 |
reg = <0>; |
| 97 |
|
| 98 |
pmic_glink_hs_in: endpoint { |
| 99 |
remote-endpoint = <&usb_1_dwc3_hs>; |
| 100 |
}; |
| 101 |
}; |
| 102 |
|
| 103 |
port@1 { |
| 104 |
reg = <1>; |
| 105 |
|
| 106 |
pmic_glink_ss_in: endpoint { |
| 107 |
remote-endpoint = <&usb_dp_qmpphy_out>; |
| 108 |
}; |
| 109 |
}; |
| 110 |
}; |
| 111 |
}; |
| 112 |
}; |
| 113 |
|
| 114 |
reserved-memory { |
| 115 |
mpss_mem: mpss-region@89800000 { |
| 116 |
reg = <0x0 0x89800000 0x0 0x10800000>; |
| 117 |
no-map; |
| 118 |
}; |
| 119 |
|
| 120 |
splash@b8000000 { |
| 121 |
reg = <0x0 0xb8000000 0x0 0x2b00000>; |
| 122 |
no-map; |
| 123 |
}; |
| 124 |
|
| 125 |
hwfence_shbuf: hwfence-shbuf-region@e6440000 { |
| 126 |
reg = <0x0 0xe6440000 0x0 0x2dd000>; |
| 127 |
no-map; |
| 128 |
}; |
| 129 |
|
| 130 |
rmtfs_mem: memory@f8b00000 { |
| 131 |
compatible = "qcom,rmtfs-mem"; |
| 132 |
reg = <0x0 0xf8b00000 0x0 0x280000>; |
| 133 |
no-map; |
| 134 |
|
| 135 |
qcom,client-id = <1>; |
| 136 |
qcom,vmid = <QCOM_SCM_VMID_MSS_MSA>; |
| 137 |
}; |
| 138 |
|
| 139 |
ramoops@ffd00000 { |
| 140 |
compatible = "ramoops"; |
| 141 |
reg = <0x0 0xffd00000 0x0 0xc0000>; |
| 142 |
console-size = <0x40000>; |
| 143 |
record-size = <0x1000>; |
| 144 |
pmsg-size = <0x40000>; |
| 145 |
ecc-size = <16>; |
| 146 |
}; |
| 147 |
|
| 148 |
rdtag-store-region@ffdc0000 { |
| 149 |
reg = <0x0 0xffdc0000 0x0 0x40000>; |
| 150 |
no-map; |
| 151 |
}; |
| 152 |
}; |
| 153 |
|
| 154 |
vph_pwr: vph-pwr-regulator { |
| 155 |
compatible = "regulator-fixed"; |
| 156 |
regulator-name = "vph_pwr"; |
| 157 |
regulator-min-microvolt = <3700000>; |
| 158 |
regulator-max-microvolt = <3700000>; |
| 159 |
|
| 160 |
regulator-always-on; |
| 161 |
regulator-boot-on; |
| 162 |
}; |
| 163 |
}; |
| 164 |
|
| 165 |
&apps_rsc { |
| 166 |
regulators-0 { |
| 167 |
compatible = "qcom,pm8550-rpmh-regulators"; |
| 168 |
qcom,pmic-id = "b"; |
| 169 |
|
| 170 |
pm8550_bob1: bob1 { |
| 171 |
regulator-name = "pm8550_bob1"; |
| 172 |
regulator-min-microvolt = <3416000>; |
| 173 |
regulator-max-microvolt = <3960000>; |
| 174 |
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| 175 |
}; |
| 176 |
|
| 177 |
/* TODO: bob2 @ 2.704-3.008V doesn't fall into the vreg driver constraints */ |
| 178 |
|
| 179 |
pm8550_l1: ldo1 { |
| 180 |
regulator-name = "pm8550_l1"; |
| 181 |
regulator-min-microvolt = <1800000>; |
| 182 |
regulator-max-microvolt = <1800000>; |
| 183 |
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| 184 |
}; |
| 185 |
|
| 186 |
pm8550_l2: ldo2 { |
| 187 |
regulator-name = "pm8550_l2"; |
| 188 |
regulator-min-microvolt = <3008000>; |
| 189 |
regulator-max-microvolt = <3008000>; |
| 190 |
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| 191 |
}; |
| 192 |
|
| 193 |
/* L4 exists in cmd-db, but the board seems to crash on access */ |
| 194 |
|
| 195 |
pm8550_l5: ldo5 { |
| 196 |
regulator-name = "pm8550_l5"; |
| 197 |
regulator-min-microvolt = <3104000>; |
| 198 |
regulator-max-microvolt = <3104000>; |
| 199 |
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| 200 |
}; |
| 201 |
|
| 202 |
pm8550_l6: ldo6 { |
| 203 |
regulator-name = "pm8550_l6"; |
| 204 |
regulator-min-microvolt = <1800000>; |
| 205 |
regulator-max-microvolt = <3008000>; |
| 206 |
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| 207 |
}; |
| 208 |
|
| 209 |
pm8550_l7: ldo7 { |
| 210 |
regulator-name = "pm8550_l7"; |
| 211 |
regulator-min-microvolt = <1800000>; |
| 212 |
regulator-max-microvolt = <3008000>; |
| 213 |
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| 214 |
}; |
| 215 |
|
| 216 |
pm8550_l8: ldo8 { |
| 217 |
regulator-name = "pm8550_l8"; |
| 218 |
regulator-min-microvolt = <1800000>; |
| 219 |
regulator-max-microvolt = <3008000>; |
| 220 |
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| 221 |
}; |
| 222 |
|
| 223 |
pm8550_l9: ldo9 { |
| 224 |
regulator-name = "pm8550_l9"; |
| 225 |
regulator-min-microvolt = <2960000>; |
| 226 |
regulator-max-microvolt = <3008000>; |
| 227 |
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| 228 |
}; |
| 229 |
|
| 230 |
pm8550_l10: ldo10 { |
| 231 |
regulator-name = "pm8550_l10"; |
| 232 |
regulator-min-microvolt = <1800000>; |
| 233 |
regulator-max-microvolt = <1800000>; |
| 234 |
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| 235 |
}; |
| 236 |
|
| 237 |
pm8550_l11: ldo11 { |
| 238 |
regulator-name = "pm8550_l11"; |
| 239 |
regulator-min-microvolt = <1200000>; |
| 240 |
regulator-max-microvolt = <1504000>; |
| 241 |
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| 242 |
}; |
| 243 |
|
| 244 |
pm8550_l12: ldo12 { |
| 245 |
regulator-name = "pm8550_l12"; |
| 246 |
regulator-min-microvolt = <1800000>; |
| 247 |
regulator-max-microvolt = <1800000>; |
| 248 |
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| 249 |
}; |
| 250 |
|
| 251 |
pm8550_l13: ldo13 { |
| 252 |
regulator-name = "pm8550_l13"; |
| 253 |
regulator-min-microvolt = <3000000>; |
| 254 |
regulator-max-microvolt = <3000000>; |
| 255 |
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| 256 |
}; |
| 257 |
|
| 258 |
pm8550_l14: ldo14 { |
| 259 |
regulator-name = "pm8550_l14"; |
| 260 |
regulator-min-microvolt = <3304000>; |
| 261 |
regulator-max-microvolt = <3304000>; |
| 262 |
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| 263 |
}; |
| 264 |
|
| 265 |
pm8550_l15: ldo15 { |
| 266 |
regulator-name = "pm8550_l15"; |
| 267 |
regulator-min-microvolt = <1800000>; |
| 268 |
regulator-max-microvolt = <1800000>; |
| 269 |
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| 270 |
}; |
| 271 |
|
| 272 |
pm8550_l16: ldo16 { |
| 273 |
regulator-name = "pm8550_l16"; |
| 274 |
regulator-min-microvolt = <2800000>; |
| 275 |
regulator-max-microvolt = <2800000>; |
| 276 |
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| 277 |
}; |
| 278 |
|
| 279 |
pm8550_l17: ldo17 { |
| 280 |
regulator-name = "pm8550_l17"; |
| 281 |
regulator-min-microvolt = <2504000>; |
| 282 |
regulator-max-microvolt = <2504000>; |
| 283 |
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| 284 |
}; |
| 285 |
}; |
| 286 |
|
| 287 |
regulators-1 { |
| 288 |
compatible = "qcom,pm8550vs-rpmh-regulators"; |
| 289 |
qcom,pmic-id = "c"; |
| 290 |
|
| 291 |
pm8550vs_0_l1: ldo1 { |
| 292 |
regulator-name = "pm8550vs_0_l1"; |
| 293 |
regulator-min-microvolt = <1200000>; |
| 294 |
regulator-max-microvolt = <1200000>; |
| 295 |
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| 296 |
}; |
| 297 |
|
| 298 |
pm8550vs_0_l3: ldo3 { |
| 299 |
regulator-name = "pm8550vs_0_l3"; |
| 300 |
regulator-min-microvolt = <880000>; |
| 301 |
regulator-max-microvolt = <912000>; |
| 302 |
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| 303 |
}; |
| 304 |
}; |
| 305 |
|
| 306 |
regulators-2 { |
| 307 |
compatible = "qcom,pm8550vs-rpmh-regulators"; |
| 308 |
qcom,pmic-id = "d"; |
| 309 |
|
| 310 |
pm8550vs_1_l1: ldo1 { |
| 311 |
regulator-name = "pm8550vs_1_l1"; |
| 312 |
regulator-min-microvolt = <880000>; |
| 313 |
regulator-max-microvolt = <920000>; |
| 314 |
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| 315 |
}; |
| 316 |
|
| 317 |
/* L3 exists in cmd-db, but the board seems to crash on access */ |
| 318 |
}; |
| 319 |
|
| 320 |
regulators-3 { |
| 321 |
compatible = "qcom,pm8550vs-rpmh-regulators"; |
| 322 |
qcom,pmic-id = "e"; |
| 323 |
|
| 324 |
pm8550vs_2_s4: smps4 { |
| 325 |
regulator-name = "pm8550vs_2_s4"; |
| 326 |
regulator-min-microvolt = <904000>; |
| 327 |
regulator-max-microvolt = <984000>; |
| 328 |
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| 329 |
}; |
| 330 |
|
| 331 |
pm8550vs_2_s5: smps5 { |
| 332 |
regulator-name = "pm8550vs_2_s5"; |
| 333 |
regulator-min-microvolt = <1010000>; |
| 334 |
regulator-max-microvolt = <1120000>; |
| 335 |
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| 336 |
}; |
| 337 |
|
| 338 |
pm8550vs_2_l1: ldo1 { |
| 339 |
regulator-name = "pm8550vs_2_l1"; |
| 340 |
regulator-min-microvolt = <880000>; |
| 341 |
regulator-max-microvolt = <912000>; |
| 342 |
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| 343 |
}; |
| 344 |
|
| 345 |
pm8550vs_2_l2: ldo2 { |
| 346 |
regulator-name = "pm8550vs_2_l2"; |
| 347 |
regulator-min-microvolt = <880000>; |
| 348 |
regulator-max-microvolt = <968000>; |
| 349 |
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| 350 |
}; |
| 351 |
|
| 352 |
pm8550vs_2_l3: ldo3 { |
| 353 |
regulator-name = "pm8550vs_2_l3"; |
| 354 |
regulator-min-microvolt = <1200000>; |
| 355 |
regulator-max-microvolt = <1200000>; |
| 356 |
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| 357 |
}; |
| 358 |
}; |
| 359 |
|
| 360 |
regulators-4 { |
| 361 |
compatible = "qcom,pm8550ve-rpmh-regulators"; |
| 362 |
qcom,pmic-id = "f"; |
| 363 |
|
| 364 |
pm8550ve_s4: smps4 { |
| 365 |
regulator-name = "pm8550ve_s4"; |
| 366 |
regulator-min-microvolt = <500000>; |
| 367 |
regulator-max-microvolt = <700000>; |
| 368 |
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| 369 |
}; |
| 370 |
|
| 371 |
pm8550ve_l1: ldo1 { |
| 372 |
regulator-name = "pm8550ve_l1"; |
| 373 |
regulator-min-microvolt = <912000>; |
| 374 |
regulator-max-microvolt = <912000>; |
| 375 |
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| 376 |
}; |
| 377 |
|
| 378 |
pm8550ve_l2: ldo2 { |
| 379 |
regulator-name = "pm8550ve_l2"; |
| 380 |
regulator-min-microvolt = <880000>; |
| 381 |
regulator-max-microvolt = <912000>; |
| 382 |
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| 383 |
}; |
| 384 |
|
| 385 |
pm8550ve_l3: ldo3 { |
| 386 |
regulator-name = "pm8550ve_l3"; |
| 387 |
regulator-min-microvolt = <912000>; |
| 388 |
regulator-max-microvolt = <912000>; |
| 389 |
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| 390 |
}; |
| 391 |
}; |
| 392 |
|
| 393 |
regulators-5 { |
| 394 |
compatible = "qcom,pm8550vs-rpmh-regulators"; |
| 395 |
qcom,pmic-id = "g"; |
| 396 |
|
| 397 |
pm8550vs_3_s1: smps1 { |
| 398 |
regulator-name = "pm8550vs_3_s1"; |
| 399 |
regulator-min-microvolt = <1200000>; |
| 400 |
regulator-max-microvolt = <1300000>; |
| 401 |
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| 402 |
}; |
| 403 |
|
| 404 |
pm8550vs_3_s2: smps2 { |
| 405 |
regulator-name = "pm8550vs_3_s2"; |
| 406 |
regulator-min-microvolt = <500000>; |
| 407 |
regulator-max-microvolt = <1036000>; |
| 408 |
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| 409 |
}; |
| 410 |
|
| 411 |
pm8550vs_3_s3: smps3 { |
| 412 |
regulator-name = "pm8550vs_3_s3"; |
| 413 |
regulator-min-microvolt = <300000>; |
| 414 |
regulator-max-microvolt = <1004000>; |
| 415 |
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| 416 |
}; |
| 417 |
|
| 418 |
pm8550vs_3_s4: smps4 { |
| 419 |
regulator-name = "pm8550vs_3_s4"; |
| 420 |
regulator-min-microvolt = <1200000>; |
| 421 |
regulator-max-microvolt = <1352000>; |
| 422 |
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| 423 |
}; |
| 424 |
|
| 425 |
pm8550vs_3_s5: smps5 { |
| 426 |
regulator-name = "pm8550vs_3_s5"; |
| 427 |
regulator-min-microvolt = <500000>; |
| 428 |
regulator-max-microvolt = <1004000>; |
| 429 |
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| 430 |
}; |
| 431 |
|
| 432 |
pm8550vs_3_s6: smps6 { |
| 433 |
regulator-name = "pm8550vs_3_s6"; |
| 434 |
regulator-min-microvolt = <1800000>; |
| 435 |
regulator-max-microvolt = <2000000>; |
| 436 |
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| 437 |
}; |
| 438 |
|
| 439 |
pm8550vs_3_l1: ldo1 { |
| 440 |
regulator-name = "pm8550vs_3_l1"; |
| 441 |
regulator-min-microvolt = <1144000>; |
| 442 |
regulator-max-microvolt = <1256000>; |
| 443 |
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| 444 |
}; |
| 445 |
|
| 446 |
pm8550vs_3_l2: ldo2 { |
| 447 |
regulator-name = "pm8550vs_3_l2"; |
| 448 |
regulator-min-microvolt = <1104000>; |
| 449 |
regulator-max-microvolt = <1200000>; |
| 450 |
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| 451 |
}; |
| 452 |
|
| 453 |
pm8550vs_3_l3: ldo3 { |
| 454 |
regulator-name = "pm8550vs_3_l3"; |
| 455 |
regulator-min-microvolt = <1200000>; |
| 456 |
regulator-max-microvolt = <1200000>; |
| 457 |
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| 458 |
}; |
| 459 |
}; |
| 460 |
|
| 461 |
/* TODO: Unknown PMIC @ k, l, PM8010 @ m, n */ |
| 462 |
}; |
| 463 |
|
| 464 |
&gpi_dma1 { |
| 465 |
status = "okay"; |
| 466 |
}; |
| 467 |
|
| 468 |
&gpi_dma2 { |
| 469 |
status = "okay"; |
| 470 |
}; |
| 471 |
|
| 472 |
&i2c_hub_2 { |
| 473 |
clock-frequency = <400000>; |
| 474 |
status = "okay"; |
| 475 |
|
| 476 |
pmic@75 { |
| 477 |
compatible = "dlg,slg51000"; |
| 478 |
reg = <0x75>; |
| 479 |
dlg,cs-gpios = <&pm8550vs_g_gpios 4 GPIO_ACTIVE_HIGH>; |
| 480 |
|
| 481 |
pinctrl-0 = <&cam_pwr_a_cs>; |
| 482 |
pinctrl-names = "default"; |
| 483 |
|
| 484 |
regulators { |
| 485 |
slg51000_a_ldo1: ldo1 { |
| 486 |
regulator-name = "slg51000_a_ldo1"; |
| 487 |
regulator-min-microvolt = <2400000>; |
| 488 |
regulator-max-microvolt = <3300000>; |
| 489 |
}; |
| 490 |
|
| 491 |
slg51000_a_ldo2: ldo2 { |
| 492 |
regulator-name = "slg51000_a_ldo2"; |
| 493 |
regulator-min-microvolt = <2400000>; |
| 494 |
regulator-max-microvolt = <3300000>; |
| 495 |
}; |
| 496 |
|
| 497 |
slg51000_a_ldo3: ldo3 { |
| 498 |
regulator-name = "slg51000_a_ldo3"; |
| 499 |
regulator-min-microvolt = <1200000>; |
| 500 |
regulator-max-microvolt = <3750000>; |
| 501 |
}; |
| 502 |
|
| 503 |
slg51000_a_ldo4: ldo4 { |
| 504 |
regulator-name = "slg51000_a_ldo4"; |
| 505 |
regulator-min-microvolt = <1200000>; |
| 506 |
regulator-max-microvolt = <3750000>; |
| 507 |
}; |
| 508 |
|
| 509 |
slg51000_a_ldo5: ldo5 { |
| 510 |
regulator-name = "slg51000_a_ldo5"; |
| 511 |
regulator-min-microvolt = <500000>; |
| 512 |
regulator-max-microvolt = <1200000>; |
| 513 |
}; |
| 514 |
|
| 515 |
slg51000_a_ldo6: ldo6 { |
| 516 |
regulator-name = "slg51000_a_ldo6"; |
| 517 |
regulator-min-microvolt = <500000>; |
| 518 |
regulator-max-microvolt = <1200000>; |
| 519 |
}; |
| 520 |
|
| 521 |
slg51000_a_ldo7: ldo7 { |
| 522 |
regulator-name = "slg51000_a_ldo7"; |
| 523 |
regulator-min-microvolt = <1200000>; |
| 524 |
regulator-max-microvolt = <3750000>; |
| 525 |
}; |
| 526 |
}; |
| 527 |
}; |
| 528 |
}; |
| 529 |
|
| 530 |
&i2c_master_hub_0 { |
| 531 |
status = "okay"; |
| 532 |
}; |
| 533 |
|
| 534 |
&i2c0 { |
| 535 |
clock-frequency = <1000000>; |
| 536 |
status = "okay"; |
| 537 |
|
| 538 |
/* NXP NFC @ 28 */ |
| 539 |
}; |
| 540 |
|
| 541 |
&i2c4 { |
| 542 |
clock-frequency = <400000>; |
| 543 |
status = "okay"; |
| 544 |
|
| 545 |
/* LX Semi SW82907 touchscreen @ 28 */ |
| 546 |
}; |
| 547 |
|
| 548 |
&i2c10 { |
| 549 |
clock-frequency = <1000000>; |
| 550 |
status = "okay"; |
| 551 |
|
| 552 |
/* Cirrus Logic CS40L25A boosted haptics driver @ 40 */ |
| 553 |
}; |
| 554 |
|
| 555 |
&i2c11 { |
| 556 |
clock-frequency = <1000000>; |
| 557 |
status = "okay"; |
| 558 |
|
| 559 |
cs35l41_l: speaker-amp@30 { |
| 560 |
compatible = "cirrus,cs35l45"; |
| 561 |
reg = <0x30>; |
| 562 |
interrupts-extended = <&tlmm 182 IRQ_TYPE_LEVEL_LOW>; |
| 563 |
reset-gpios = <&tlmm 183 GPIO_ACTIVE_HIGH>; |
| 564 |
cirrus,asp-sdout-hiz-ctrl = <(CS35L45_ASP_TX_HIZ_UNUSED | CS35L45_ASP_TX_HIZ_DISABLED)>; |
| 565 |
#sound-dai-cells = <1>; |
| 566 |
|
| 567 |
cirrus,gpio-ctrl2 { |
| 568 |
gpio-ctrl = <0x2>; |
| 569 |
}; |
| 570 |
}; |
| 571 |
|
| 572 |
cs35l41_r: speaker-amp@31 { |
| 573 |
compatible = "cirrus,cs35l45"; |
| 574 |
reg = <0x31>; |
| 575 |
interrupts-extended = <&tlmm 182 IRQ_TYPE_LEVEL_LOW>; |
| 576 |
reset-gpios = <&tlmm 183 GPIO_ACTIVE_HIGH>; |
| 577 |
cirrus,asp-sdout-hiz-ctrl = <(CS35L45_ASP_TX_HIZ_UNUSED | CS35L45_ASP_TX_HIZ_DISABLED)>; |
| 578 |
#sound-dai-cells = <1>; |
| 579 |
|
| 580 |
cirrus,gpio-ctrl2 { |
| 581 |
gpio-ctrl = <0x2>; |
| 582 |
}; |
| 583 |
}; |
| 584 |
}; |
| 585 |
|
| 586 |
&pcie0 { |
| 587 |
wake-gpios = <&tlmm 96 GPIO_ACTIVE_HIGH>; |
| 588 |
perst-gpios = <&tlmm 94 GPIO_ACTIVE_LOW>; |
| 589 |
|
| 590 |
pinctrl-0 = <&pcie0_default_state>; |
| 591 |
pinctrl-names = "default"; |
| 592 |
|
| 593 |
status = "okay"; |
| 594 |
}; |
| 595 |
|
| 596 |
&pcie0_phy { |
| 597 |
vdda-phy-supply = <&pm8550vs_2_l1>; |
| 598 |
vdda-pll-supply = <&pm8550vs_2_l3>; |
| 599 |
|
| 600 |
status = "okay"; |
| 601 |
}; |
| 602 |
|
| 603 |
&pm8550_flash { |
| 604 |
status = "okay"; |
| 605 |
|
| 606 |
led-0 { |
| 607 |
function = LED_FUNCTION_FLASH; |
| 608 |
color = <LED_COLOR_ID_WHITE>; |
| 609 |
led-sources = <1>, <4>; |
| 610 |
led-max-microamp = <500000>; |
| 611 |
flash-max-microamp = <1000000>; |
| 612 |
flash-max-timeout-us = <1280000>; |
| 613 |
function-enumerator = <0>; |
| 614 |
}; |
| 615 |
|
| 616 |
led-1 { |
| 617 |
function = LED_FUNCTION_FLASH; |
| 618 |
color = <LED_COLOR_ID_YELLOW>; |
| 619 |
led-sources = <2>, <3>; |
| 620 |
led-max-microamp = <500000>; |
| 621 |
flash-max-microamp = <1000000>; |
| 622 |
flash-max-timeout-us = <1280000>; |
| 623 |
function-enumerator = <1>; |
| 624 |
}; |
| 625 |
}; |
| 626 |
|
| 627 |
&pm8550_gpios { |
| 628 |
vol_down_n: volume-down-n-state { |
| 629 |
pins = "gpio6"; |
| 630 |
function = "normal"; |
| 631 |
power-source = <1>; |
| 632 |
bias-pull-up; |
| 633 |
input-enable; |
| 634 |
}; |
| 635 |
|
| 636 |
sdc2_card_det_n: sd-card-det-n-state { |
| 637 |
pins = "gpio12"; |
| 638 |
function = "normal"; |
| 639 |
power-source = <1>; |
| 640 |
bias-pull-down; |
| 641 |
output-disable; |
| 642 |
input-enable; |
| 643 |
}; |
| 644 |
}; |
| 645 |
|
| 646 |
&pm8550b_gpios { |
| 647 |
snapshot_n: snapshot-n-state { |
| 648 |
pins = "gpio7"; |
| 649 |
function = "normal"; |
| 650 |
power-source = <1>; |
| 651 |
bias-pull-up; |
| 652 |
input-enable; |
| 653 |
}; |
| 654 |
|
| 655 |
focus_n: focus-n-state { |
| 656 |
pins = "gpio8"; |
| 657 |
function = "normal"; |
| 658 |
power-source = <1>; |
| 659 |
bias-pull-up; |
| 660 |
input-enable; |
| 661 |
}; |
| 662 |
}; |
| 663 |
|
| 664 |
&pm8550vs_c { |
| 665 |
status = "okay"; |
| 666 |
}; |
| 667 |
|
| 668 |
&pm8550vs_d { |
| 669 |
status = "okay"; |
| 670 |
}; |
| 671 |
|
| 672 |
&pm8550vs_e { |
| 673 |
status = "okay"; |
| 674 |
}; |
| 675 |
|
| 676 |
&pm8550vs_g { |
| 677 |
status = "okay"; |
| 678 |
}; |
| 679 |
|
| 680 |
&pm8550vs_g_gpios { |
| 681 |
cam_pwr_a_cs: cam-pwr-a-cs-state { |
| 682 |
pins = "gpio4"; |
| 683 |
function = "normal"; |
| 684 |
power-source = <0x01>; |
| 685 |
drive-push-pull; |
| 686 |
output-low; |
| 687 |
qcom,drive-strength = <PMIC_GPIO_STRENGTH_HIGH>; |
| 688 |
}; |
| 689 |
}; |
| 690 |
|
| 691 |
&pm8550b_eusb2_repeater { |
| 692 |
qcom,tune-usb2-disc-thres = /bits/ 8 <0x6>; |
| 693 |
qcom,tune-usb2-amplitude = /bits/ 8 <0xf>; |
| 694 |
qcom,tune-usb2-preem = /bits/ 8 <0x7>; |
| 695 |
vdd18-supply = <&pm8550_l15>; |
| 696 |
vdd3-supply = <&pm8550_l5>; |
| 697 |
}; |
| 698 |
|
| 699 |
&pon_pwrkey { |
| 700 |
status = "okay"; |
| 701 |
}; |
| 702 |
|
| 703 |
&pon_resin { |
| 704 |
linux,code = <KEY_VOLUMEUP>; |
| 705 |
status = "okay"; |
| 706 |
}; |
| 707 |
|
| 708 |
&qupv3_id_0 { |
| 709 |
status = "okay"; |
| 710 |
}; |
| 711 |
|
| 712 |
&qupv3_id_1 { |
| 713 |
status = "okay"; |
| 714 |
}; |
| 715 |
|
| 716 |
&remoteproc_adsp { |
| 717 |
firmware-name = "qcom/sm8550/Sony/yodo/adsp.mbn", |
| 718 |
"qcom/sm8550/Sony/yodo/adsp_dtb.mbn"; |
| 719 |
status = "okay"; |
| 720 |
}; |
| 721 |
|
| 722 |
&remoteproc_cdsp { |
| 723 |
firmware-name = "qcom/sm8550/Sony/yodo/cdsp.mbn", |
| 724 |
"qcom/sm8550/Sony/yodo/cdsp_dtb.mbn"; |
| 725 |
status = "okay"; |
| 726 |
}; |
| 727 |
|
| 728 |
&sdhc_2 { |
| 729 |
cd-gpios = <&pm8550_gpios 12 GPIO_ACTIVE_HIGH>; |
| 730 |
pinctrl-0 = <&sdc2_default &sdc2_card_det_n>; |
| 731 |
pinctrl-1 = <&sdc2_sleep &sdc2_card_det_n>; |
| 732 |
pinctrl-names = "default", "sleep"; |
| 733 |
vmmc-supply = <&pm8550_l9>; |
| 734 |
vqmmc-supply = <&pm8550_l8>; |
| 735 |
no-sdio; |
| 736 |
no-mmc; |
| 737 |
status = "okay"; |
| 738 |
}; |
| 739 |
|
| 740 |
&sleep_clk { |
| 741 |
clock-frequency = <32764>; |
| 742 |
}; |
| 743 |
|
| 744 |
&tlmm { |
| 745 |
gpio-reserved-ranges = <32 8>; |
| 746 |
}; |
| 747 |
|
| 748 |
&uart7 { |
| 749 |
status = "okay"; |
| 750 |
}; |
| 751 |
|
| 752 |
&usb_1 { |
| 753 |
status = "okay"; |
| 754 |
}; |
| 755 |
|
| 756 |
&usb_1_dwc3_hs { |
| 757 |
remote-endpoint = <&pmic_glink_hs_in>; |
| 758 |
}; |
| 759 |
|
| 760 |
&usb_1_hsphy { |
| 761 |
vdd-supply = <&pm8550vs_2_l1>; |
| 762 |
vdda12-supply = <&pm8550vs_2_l3>; |
| 763 |
phys = <&pm8550b_eusb2_repeater>; |
| 764 |
|
| 765 |
status = "okay"; |
| 766 |
}; |
| 767 |
|
| 768 |
&usb_dp_qmpphy { |
| 769 |
vdda-phy-supply = <&pm8550vs_2_l3>; |
| 770 |
vdda-pll-supply = <&pm8550ve_l3>; |
| 771 |
|
| 772 |
status = "okay"; |
| 773 |
}; |
| 774 |
|
| 775 |
&usb_dp_qmpphy_out { |
| 776 |
remote-endpoint = <&pmic_glink_ss_in>; |
| 777 |
}; |
| 778 |
|
| 779 |
&xo_board { |
| 780 |
clock-frequency = <76800000>; |
| 781 |
}; |