| 1 |
// SPDX-License-Identifier: BSD-3-Clause |
| 2 |
/* |
| 3 |
* Copyright (c) 2021, Linaro Limited |
| 4 |
*/ |
| 5 |
|
| 6 |
#include <dt-bindings/interrupt-controller/arm-gic.h> |
| 7 |
#include <dt-bindings/clock/qcom,dsi-phy-28nm.h> |
| 8 |
#include <dt-bindings/clock/qcom,gcc-sm8450.h> |
| 9 |
#include <dt-bindings/clock/qcom,rpmh.h> |
| 10 |
#include <dt-bindings/clock/qcom,sm8450-camcc.h> |
| 11 |
#include <dt-bindings/clock/qcom,sm8450-dispcc.h> |
| 12 |
#include <dt-bindings/clock/qcom,sm8450-gpucc.h> |
| 13 |
#include <dt-bindings/clock/qcom,sm8450-videocc.h> |
| 14 |
#include <dt-bindings/dma/qcom-gpi.h> |
| 15 |
#include <dt-bindings/firmware/qcom,scm.h> |
| 16 |
#include <dt-bindings/gpio/gpio.h> |
| 17 |
#include <dt-bindings/mailbox/qcom-ipcc.h> |
| 18 |
#include <dt-bindings/phy/phy-qcom-qmp.h> |
| 19 |
#include <dt-bindings/power/qcom,rpmhpd.h> |
| 20 |
#include <dt-bindings/power/qcom-rpmpd.h> |
| 21 |
#include <dt-bindings/interconnect/qcom,icc.h> |
| 22 |
#include <dt-bindings/interconnect/qcom,sm8450.h> |
| 23 |
#include <dt-bindings/reset/qcom,sm8450-gpucc.h> |
| 24 |
#include <dt-bindings/soc/qcom,gpr.h> |
| 25 |
#include <dt-bindings/soc/qcom,rpmh-rsc.h> |
| 26 |
#include <dt-bindings/sound/qcom,q6dsp-lpass-ports.h> |
| 27 |
#include <dt-bindings/thermal/thermal.h> |
| 28 |
|
| 29 |
/ { |
| 30 |
interrupt-parent = <&intc>; |
| 31 |
|
| 32 |
#address-cells = <2>; |
| 33 |
#size-cells = <2>; |
| 34 |
|
| 35 |
chosen { }; |
| 36 |
|
| 37 |
clocks { |
| 38 |
xo_board: xo-board { |
| 39 |
compatible = "fixed-clock"; |
| 40 |
#clock-cells = <0>; |
| 41 |
clock-frequency = <76800000>; |
| 42 |
}; |
| 43 |
|
| 44 |
sleep_clk: sleep-clk { |
| 45 |
compatible = "fixed-clock"; |
| 46 |
#clock-cells = <0>; |
| 47 |
clock-frequency = <32764>; |
| 48 |
}; |
| 49 |
}; |
| 50 |
|
| 51 |
cpus { |
| 52 |
#address-cells = <2>; |
| 53 |
#size-cells = <0>; |
| 54 |
|
| 55 |
cpu0: cpu@0 { |
| 56 |
device_type = "cpu"; |
| 57 |
compatible = "qcom,kryo780"; |
| 58 |
reg = <0x0 0x0>; |
| 59 |
enable-method = "psci"; |
| 60 |
next-level-cache = <&l2_0>; |
| 61 |
power-domains = <&cpu_pd0>; |
| 62 |
power-domain-names = "psci"; |
| 63 |
qcom,freq-domain = <&cpufreq_hw 0>; |
| 64 |
#cooling-cells = <2>; |
| 65 |
clocks = <&cpufreq_hw 0>; |
| 66 |
l2_0: l2-cache { |
| 67 |
compatible = "cache"; |
| 68 |
cache-level = <2>; |
| 69 |
cache-unified; |
| 70 |
next-level-cache = <&l3_0>; |
| 71 |
l3_0: l3-cache { |
| 72 |
compatible = "cache"; |
| 73 |
cache-level = <3>; |
| 74 |
cache-unified; |
| 75 |
}; |
| 76 |
}; |
| 77 |
}; |
| 78 |
|
| 79 |
cpu1: cpu@100 { |
| 80 |
device_type = "cpu"; |
| 81 |
compatible = "qcom,kryo780"; |
| 82 |
reg = <0x0 0x100>; |
| 83 |
enable-method = "psci"; |
| 84 |
next-level-cache = <&l2_100>; |
| 85 |
power-domains = <&cpu_pd1>; |
| 86 |
power-domain-names = "psci"; |
| 87 |
qcom,freq-domain = <&cpufreq_hw 0>; |
| 88 |
#cooling-cells = <2>; |
| 89 |
clocks = <&cpufreq_hw 0>; |
| 90 |
l2_100: l2-cache { |
| 91 |
compatible = "cache"; |
| 92 |
cache-level = <2>; |
| 93 |
cache-unified; |
| 94 |
next-level-cache = <&l3_0>; |
| 95 |
}; |
| 96 |
}; |
| 97 |
|
| 98 |
cpu2: cpu@200 { |
| 99 |
device_type = "cpu"; |
| 100 |
compatible = "qcom,kryo780"; |
| 101 |
reg = <0x0 0x200>; |
| 102 |
enable-method = "psci"; |
| 103 |
next-level-cache = <&l2_200>; |
| 104 |
power-domains = <&cpu_pd2>; |
| 105 |
power-domain-names = "psci"; |
| 106 |
qcom,freq-domain = <&cpufreq_hw 0>; |
| 107 |
#cooling-cells = <2>; |
| 108 |
clocks = <&cpufreq_hw 0>; |
| 109 |
l2_200: l2-cache { |
| 110 |
compatible = "cache"; |
| 111 |
cache-level = <2>; |
| 112 |
cache-unified; |
| 113 |
next-level-cache = <&l3_0>; |
| 114 |
}; |
| 115 |
}; |
| 116 |
|
| 117 |
cpu3: cpu@300 { |
| 118 |
device_type = "cpu"; |
| 119 |
compatible = "qcom,kryo780"; |
| 120 |
reg = <0x0 0x300>; |
| 121 |
enable-method = "psci"; |
| 122 |
next-level-cache = <&l2_300>; |
| 123 |
power-domains = <&cpu_pd3>; |
| 124 |
power-domain-names = "psci"; |
| 125 |
qcom,freq-domain = <&cpufreq_hw 0>; |
| 126 |
#cooling-cells = <2>; |
| 127 |
clocks = <&cpufreq_hw 0>; |
| 128 |
l2_300: l2-cache { |
| 129 |
compatible = "cache"; |
| 130 |
cache-level = <2>; |
| 131 |
cache-unified; |
| 132 |
next-level-cache = <&l3_0>; |
| 133 |
}; |
| 134 |
}; |
| 135 |
|
| 136 |
cpu4: cpu@400 { |
| 137 |
device_type = "cpu"; |
| 138 |
compatible = "qcom,kryo780"; |
| 139 |
reg = <0x0 0x400>; |
| 140 |
enable-method = "psci"; |
| 141 |
next-level-cache = <&l2_400>; |
| 142 |
power-domains = <&cpu_pd4>; |
| 143 |
power-domain-names = "psci"; |
| 144 |
qcom,freq-domain = <&cpufreq_hw 1>; |
| 145 |
#cooling-cells = <2>; |
| 146 |
clocks = <&cpufreq_hw 1>; |
| 147 |
l2_400: l2-cache { |
| 148 |
compatible = "cache"; |
| 149 |
cache-level = <2>; |
| 150 |
cache-unified; |
| 151 |
next-level-cache = <&l3_0>; |
| 152 |
}; |
| 153 |
}; |
| 154 |
|
| 155 |
cpu5: cpu@500 { |
| 156 |
device_type = "cpu"; |
| 157 |
compatible = "qcom,kryo780"; |
| 158 |
reg = <0x0 0x500>; |
| 159 |
enable-method = "psci"; |
| 160 |
next-level-cache = <&l2_500>; |
| 161 |
power-domains = <&cpu_pd5>; |
| 162 |
power-domain-names = "psci"; |
| 163 |
qcom,freq-domain = <&cpufreq_hw 1>; |
| 164 |
#cooling-cells = <2>; |
| 165 |
clocks = <&cpufreq_hw 1>; |
| 166 |
l2_500: l2-cache { |
| 167 |
compatible = "cache"; |
| 168 |
cache-level = <2>; |
| 169 |
cache-unified; |
| 170 |
next-level-cache = <&l3_0>; |
| 171 |
}; |
| 172 |
}; |
| 173 |
|
| 174 |
cpu6: cpu@600 { |
| 175 |
device_type = "cpu"; |
| 176 |
compatible = "qcom,kryo780"; |
| 177 |
reg = <0x0 0x600>; |
| 178 |
enable-method = "psci"; |
| 179 |
next-level-cache = <&l2_600>; |
| 180 |
power-domains = <&cpu_pd6>; |
| 181 |
power-domain-names = "psci"; |
| 182 |
qcom,freq-domain = <&cpufreq_hw 1>; |
| 183 |
#cooling-cells = <2>; |
| 184 |
clocks = <&cpufreq_hw 1>; |
| 185 |
l2_600: l2-cache { |
| 186 |
compatible = "cache"; |
| 187 |
cache-level = <2>; |
| 188 |
cache-unified; |
| 189 |
next-level-cache = <&l3_0>; |
| 190 |
}; |
| 191 |
}; |
| 192 |
|
| 193 |
cpu7: cpu@700 { |
| 194 |
device_type = "cpu"; |
| 195 |
compatible = "qcom,kryo780"; |
| 196 |
reg = <0x0 0x700>; |
| 197 |
enable-method = "psci"; |
| 198 |
next-level-cache = <&l2_700>; |
| 199 |
power-domains = <&cpu_pd7>; |
| 200 |
power-domain-names = "psci"; |
| 201 |
qcom,freq-domain = <&cpufreq_hw 2>; |
| 202 |
#cooling-cells = <2>; |
| 203 |
clocks = <&cpufreq_hw 2>; |
| 204 |
l2_700: l2-cache { |
| 205 |
compatible = "cache"; |
| 206 |
cache-level = <2>; |
| 207 |
cache-unified; |
| 208 |
next-level-cache = <&l3_0>; |
| 209 |
}; |
| 210 |
}; |
| 211 |
|
| 212 |
cpu-map { |
| 213 |
cluster0 { |
| 214 |
core0 { |
| 215 |
cpu = <&cpu0>; |
| 216 |
}; |
| 217 |
|
| 218 |
core1 { |
| 219 |
cpu = <&cpu1>; |
| 220 |
}; |
| 221 |
|
| 222 |
core2 { |
| 223 |
cpu = <&cpu2>; |
| 224 |
}; |
| 225 |
|
| 226 |
core3 { |
| 227 |
cpu = <&cpu3>; |
| 228 |
}; |
| 229 |
|
| 230 |
core4 { |
| 231 |
cpu = <&cpu4>; |
| 232 |
}; |
| 233 |
|
| 234 |
core5 { |
| 235 |
cpu = <&cpu5>; |
| 236 |
}; |
| 237 |
|
| 238 |
core6 { |
| 239 |
cpu = <&cpu6>; |
| 240 |
}; |
| 241 |
|
| 242 |
core7 { |
| 243 |
cpu = <&cpu7>; |
| 244 |
}; |
| 245 |
}; |
| 246 |
}; |
| 247 |
|
| 248 |
idle-states { |
| 249 |
entry-method = "psci"; |
| 250 |
|
| 251 |
little_cpu_sleep_0: cpu-sleep-0-0 { |
| 252 |
compatible = "arm,idle-state"; |
| 253 |
idle-state-name = "silver-rail-power-collapse"; |
| 254 |
arm,psci-suspend-param = <0x40000004>; |
| 255 |
entry-latency-us = <800>; |
| 256 |
exit-latency-us = <750>; |
| 257 |
min-residency-us = <4090>; |
| 258 |
local-timer-stop; |
| 259 |
}; |
| 260 |
|
| 261 |
big_cpu_sleep_0: cpu-sleep-1-0 { |
| 262 |
compatible = "arm,idle-state"; |
| 263 |
idle-state-name = "gold-rail-power-collapse"; |
| 264 |
arm,psci-suspend-param = <0x40000004>; |
| 265 |
entry-latency-us = <600>; |
| 266 |
exit-latency-us = <1550>; |
| 267 |
min-residency-us = <4791>; |
| 268 |
local-timer-stop; |
| 269 |
}; |
| 270 |
}; |
| 271 |
|
| 272 |
domain-idle-states { |
| 273 |
cluster_sleep_0: cluster-sleep-0 { |
| 274 |
compatible = "domain-idle-state"; |
| 275 |
arm,psci-suspend-param = <0x41000044>; |
| 276 |
entry-latency-us = <1050>; |
| 277 |
exit-latency-us = <2500>; |
| 278 |
min-residency-us = <5309>; |
| 279 |
}; |
| 280 |
|
| 281 |
cluster_sleep_1: cluster-sleep-1 { |
| 282 |
compatible = "domain-idle-state"; |
| 283 |
arm,psci-suspend-param = <0x4100c344>; |
| 284 |
entry-latency-us = <2700>; |
| 285 |
exit-latency-us = <3500>; |
| 286 |
min-residency-us = <13959>; |
| 287 |
}; |
| 288 |
}; |
| 289 |
}; |
| 290 |
|
| 291 |
ete-0 { |
| 292 |
compatible = "arm,embedded-trace-extension"; |
| 293 |
cpu = <&cpu0>; |
| 294 |
|
| 295 |
out-ports { |
| 296 |
port { |
| 297 |
ete0_out_funnel_ete: endpoint { |
| 298 |
remote-endpoint = <&funnel_ete_in_ete0>; |
| 299 |
}; |
| 300 |
}; |
| 301 |
}; |
| 302 |
}; |
| 303 |
|
| 304 |
ete-1 { |
| 305 |
compatible = "arm,embedded-trace-extension"; |
| 306 |
cpu = <&cpu1>; |
| 307 |
|
| 308 |
out-ports { |
| 309 |
port { |
| 310 |
ete1_out_funnel_ete: endpoint { |
| 311 |
remote-endpoint = <&funnel_ete_in_ete1>; |
| 312 |
}; |
| 313 |
}; |
| 314 |
}; |
| 315 |
}; |
| 316 |
|
| 317 |
ete-2 { |
| 318 |
compatible = "arm,embedded-trace-extension"; |
| 319 |
cpu = <&cpu2>; |
| 320 |
|
| 321 |
out-ports { |
| 322 |
port { |
| 323 |
ete2_out_funnel_ete: endpoint { |
| 324 |
remote-endpoint = <&funnel_ete_in_ete2>; |
| 325 |
}; |
| 326 |
}; |
| 327 |
}; |
| 328 |
}; |
| 329 |
|
| 330 |
ete-3 { |
| 331 |
compatible = "arm,embedded-trace-extension"; |
| 332 |
cpu = <&cpu3>; |
| 333 |
|
| 334 |
out-ports { |
| 335 |
port { |
| 336 |
ete3_out_funnel_ete: endpoint { |
| 337 |
remote-endpoint = <&funnel_ete_in_ete3>; |
| 338 |
}; |
| 339 |
}; |
| 340 |
}; |
| 341 |
}; |
| 342 |
|
| 343 |
ete-4 { |
| 344 |
compatible = "arm,embedded-trace-extension"; |
| 345 |
cpu = <&cpu4>; |
| 346 |
|
| 347 |
out-ports { |
| 348 |
port { |
| 349 |
ete4_out_funnel_ete: endpoint { |
| 350 |
remote-endpoint = <&funnel_ete_in_ete4>; |
| 351 |
}; |
| 352 |
}; |
| 353 |
}; |
| 354 |
}; |
| 355 |
|
| 356 |
ete-5 { |
| 357 |
compatible = "arm,embedded-trace-extension"; |
| 358 |
cpu = <&cpu5>; |
| 359 |
|
| 360 |
out-ports { |
| 361 |
port { |
| 362 |
ete5_out_funnel_ete: endpoint { |
| 363 |
remote-endpoint = <&funnel_ete_in_ete5>; |
| 364 |
}; |
| 365 |
}; |
| 366 |
}; |
| 367 |
}; |
| 368 |
|
| 369 |
ete-6 { |
| 370 |
compatible = "arm,embedded-trace-extension"; |
| 371 |
cpu = <&cpu6>; |
| 372 |
|
| 373 |
out-ports { |
| 374 |
port { |
| 375 |
ete6_out_funnel_ete: endpoint { |
| 376 |
remote-endpoint = <&funnel_ete_in_ete6>; |
| 377 |
}; |
| 378 |
}; |
| 379 |
}; |
| 380 |
}; |
| 381 |
|
| 382 |
ete-7 { |
| 383 |
compatible = "arm,embedded-trace-extension"; |
| 384 |
cpu = <&cpu7>; |
| 385 |
|
| 386 |
out-ports { |
| 387 |
port { |
| 388 |
ete7_out_funnel_ete: endpoint { |
| 389 |
remote-endpoint = <&funnel_ete_in_ete7>; |
| 390 |
}; |
| 391 |
}; |
| 392 |
}; |
| 393 |
}; |
| 394 |
|
| 395 |
funnel-ete { |
| 396 |
compatible = "arm,coresight-static-funnel"; |
| 397 |
|
| 398 |
out-ports { |
| 399 |
port { |
| 400 |
funnel_ete_out_funnel_apss: endpoint { |
| 401 |
remote-endpoint = |
| 402 |
<&funnel_apss_in_funnel_ete>; |
| 403 |
}; |
| 404 |
}; |
| 405 |
}; |
| 406 |
|
| 407 |
in-ports { |
| 408 |
#address-cells = <1>; |
| 409 |
#size-cells = <0>; |
| 410 |
|
| 411 |
port@0 { |
| 412 |
reg = <0>; |
| 413 |
funnel_ete_in_ete0: endpoint { |
| 414 |
remote-endpoint = |
| 415 |
<&ete0_out_funnel_ete>; |
| 416 |
}; |
| 417 |
}; |
| 418 |
|
| 419 |
port@1 { |
| 420 |
reg = <1>; |
| 421 |
funnel_ete_in_ete1: endpoint { |
| 422 |
remote-endpoint = |
| 423 |
<&ete1_out_funnel_ete>; |
| 424 |
}; |
| 425 |
}; |
| 426 |
|
| 427 |
port@2 { |
| 428 |
reg = <2>; |
| 429 |
funnel_ete_in_ete2: endpoint { |
| 430 |
remote-endpoint = |
| 431 |
<&ete2_out_funnel_ete>; |
| 432 |
}; |
| 433 |
}; |
| 434 |
|
| 435 |
port@3 { |
| 436 |
reg = <3>; |
| 437 |
funnel_ete_in_ete3: endpoint { |
| 438 |
remote-endpoint = |
| 439 |
<&ete3_out_funnel_ete>; |
| 440 |
}; |
| 441 |
}; |
| 442 |
|
| 443 |
port@4 { |
| 444 |
reg = <4>; |
| 445 |
funnel_ete_in_ete4: endpoint { |
| 446 |
remote-endpoint = |
| 447 |
<&ete4_out_funnel_ete>; |
| 448 |
}; |
| 449 |
}; |
| 450 |
|
| 451 |
port@5 { |
| 452 |
reg = <5>; |
| 453 |
funnel_ete_in_ete5: endpoint { |
| 454 |
remote-endpoint = |
| 455 |
<&ete5_out_funnel_ete>; |
| 456 |
}; |
| 457 |
}; |
| 458 |
|
| 459 |
port@6 { |
| 460 |
reg = <6>; |
| 461 |
funnel_ete_in_ete6: endpoint { |
| 462 |
remote-endpoint = |
| 463 |
<&ete6_out_funnel_ete>; |
| 464 |
}; |
| 465 |
}; |
| 466 |
|
| 467 |
port@7 { |
| 468 |
reg = <7>; |
| 469 |
funnel_ete_in_ete7: endpoint { |
| 470 |
remote-endpoint = |
| 471 |
<&ete7_out_funnel_ete>; |
| 472 |
}; |
| 473 |
}; |
| 474 |
}; |
| 475 |
}; |
| 476 |
|
| 477 |
firmware { |
| 478 |
scm: scm { |
| 479 |
compatible = "qcom,scm-sm8450", "qcom,scm"; |
| 480 |
qcom,dload-mode = <&tcsr 0x13000>; |
| 481 |
interconnects = <&aggre2_noc MASTER_CRYPTO 0 &mc_virt SLAVE_EBI1 0>; |
| 482 |
#reset-cells = <1>; |
| 483 |
}; |
| 484 |
}; |
| 485 |
|
| 486 |
clk_virt: interconnect-0 { |
| 487 |
compatible = "qcom,sm8450-clk-virt"; |
| 488 |
#interconnect-cells = <2>; |
| 489 |
qcom,bcm-voters = <&apps_bcm_voter>; |
| 490 |
}; |
| 491 |
|
| 492 |
mc_virt: interconnect-1 { |
| 493 |
compatible = "qcom,sm8450-mc-virt"; |
| 494 |
#interconnect-cells = <2>; |
| 495 |
qcom,bcm-voters = <&apps_bcm_voter>; |
| 496 |
}; |
| 497 |
|
| 498 |
memory@a0000000 { |
| 499 |
device_type = "memory"; |
| 500 |
/* We expect the bootloader to fill in the size */ |
| 501 |
reg = <0x0 0xa0000000 0x0 0x0>; |
| 502 |
}; |
| 503 |
|
| 504 |
pmu { |
| 505 |
compatible = "arm,armv8-pmuv3"; |
| 506 |
interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>; |
| 507 |
}; |
| 508 |
|
| 509 |
psci { |
| 510 |
compatible = "arm,psci-1.0"; |
| 511 |
method = "smc"; |
| 512 |
|
| 513 |
cpu_pd0: power-domain-cpu0 { |
| 514 |
#power-domain-cells = <0>; |
| 515 |
power-domains = <&cluster_pd>; |
| 516 |
domain-idle-states = <&little_cpu_sleep_0>; |
| 517 |
}; |
| 518 |
|
| 519 |
cpu_pd1: power-domain-cpu1 { |
| 520 |
#power-domain-cells = <0>; |
| 521 |
power-domains = <&cluster_pd>; |
| 522 |
domain-idle-states = <&little_cpu_sleep_0>; |
| 523 |
}; |
| 524 |
|
| 525 |
cpu_pd2: power-domain-cpu2 { |
| 526 |
#power-domain-cells = <0>; |
| 527 |
power-domains = <&cluster_pd>; |
| 528 |
domain-idle-states = <&little_cpu_sleep_0>; |
| 529 |
}; |
| 530 |
|
| 531 |
cpu_pd3: power-domain-cpu3 { |
| 532 |
#power-domain-cells = <0>; |
| 533 |
power-domains = <&cluster_pd>; |
| 534 |
domain-idle-states = <&little_cpu_sleep_0>; |
| 535 |
}; |
| 536 |
|
| 537 |
cpu_pd4: power-domain-cpu4 { |
| 538 |
#power-domain-cells = <0>; |
| 539 |
power-domains = <&cluster_pd>; |
| 540 |
domain-idle-states = <&big_cpu_sleep_0>; |
| 541 |
}; |
| 542 |
|
| 543 |
cpu_pd5: power-domain-cpu5 { |
| 544 |
#power-domain-cells = <0>; |
| 545 |
power-domains = <&cluster_pd>; |
| 546 |
domain-idle-states = <&big_cpu_sleep_0>; |
| 547 |
}; |
| 548 |
|
| 549 |
cpu_pd6: power-domain-cpu6 { |
| 550 |
#power-domain-cells = <0>; |
| 551 |
power-domains = <&cluster_pd>; |
| 552 |
domain-idle-states = <&big_cpu_sleep_0>; |
| 553 |
}; |
| 554 |
|
| 555 |
cpu_pd7: power-domain-cpu7 { |
| 556 |
#power-domain-cells = <0>; |
| 557 |
power-domains = <&cluster_pd>; |
| 558 |
domain-idle-states = <&big_cpu_sleep_0>; |
| 559 |
}; |
| 560 |
|
| 561 |
cluster_pd: power-domain-cpu-cluster0 { |
| 562 |
#power-domain-cells = <0>; |
| 563 |
domain-idle-states = <&cluster_sleep_0>, <&cluster_sleep_1>; |
| 564 |
}; |
| 565 |
}; |
| 566 |
|
| 567 |
qup_opp_table_100mhz: opp-table-qup { |
| 568 |
compatible = "operating-points-v2"; |
| 569 |
|
| 570 |
opp-50000000 { |
| 571 |
opp-hz = /bits/ 64 <50000000>; |
| 572 |
required-opps = <&rpmhpd_opp_min_svs>; |
| 573 |
}; |
| 574 |
|
| 575 |
opp-75000000 { |
| 576 |
opp-hz = /bits/ 64 <75000000>; |
| 577 |
required-opps = <&rpmhpd_opp_low_svs>; |
| 578 |
}; |
| 579 |
|
| 580 |
opp-100000000 { |
| 581 |
opp-hz = /bits/ 64 <100000000>; |
| 582 |
required-opps = <&rpmhpd_opp_svs>; |
| 583 |
}; |
| 584 |
}; |
| 585 |
|
| 586 |
reserved_memory: reserved-memory { |
| 587 |
#address-cells = <2>; |
| 588 |
#size-cells = <2>; |
| 589 |
ranges; |
| 590 |
|
| 591 |
hyp_mem: memory@80000000 { |
| 592 |
reg = <0x0 0x80000000 0x0 0x600000>; |
| 593 |
no-map; |
| 594 |
}; |
| 595 |
|
| 596 |
xbl_dt_log_mem: memory@80600000 { |
| 597 |
reg = <0x0 0x80600000 0x0 0x40000>; |
| 598 |
no-map; |
| 599 |
}; |
| 600 |
|
| 601 |
xbl_ramdump_mem: memory@80640000 { |
| 602 |
reg = <0x0 0x80640000 0x0 0x180000>; |
| 603 |
no-map; |
| 604 |
}; |
| 605 |
|
| 606 |
xbl_sc_mem: memory@807c0000 { |
| 607 |
reg = <0x0 0x807c0000 0x0 0x40000>; |
| 608 |
no-map; |
| 609 |
}; |
| 610 |
|
| 611 |
aop_image_mem: memory@80800000 { |
| 612 |
reg = <0x0 0x80800000 0x0 0x60000>; |
| 613 |
no-map; |
| 614 |
}; |
| 615 |
|
| 616 |
aop_cmd_db_mem: memory@80860000 { |
| 617 |
compatible = "qcom,cmd-db"; |
| 618 |
reg = <0x0 0x80860000 0x0 0x20000>; |
| 619 |
no-map; |
| 620 |
}; |
| 621 |
|
| 622 |
aop_config_mem: memory@80880000 { |
| 623 |
reg = <0x0 0x80880000 0x0 0x20000>; |
| 624 |
no-map; |
| 625 |
}; |
| 626 |
|
| 627 |
tme_crash_dump_mem: memory@808a0000 { |
| 628 |
reg = <0x0 0x808a0000 0x0 0x40000>; |
| 629 |
no-map; |
| 630 |
}; |
| 631 |
|
| 632 |
tme_log_mem: memory@808e0000 { |
| 633 |
reg = <0x0 0x808e0000 0x0 0x4000>; |
| 634 |
no-map; |
| 635 |
}; |
| 636 |
|
| 637 |
uefi_log_mem: memory@808e4000 { |
| 638 |
reg = <0x0 0x808e4000 0x0 0x10000>; |
| 639 |
no-map; |
| 640 |
}; |
| 641 |
|
| 642 |
/* secdata region can be reused by apps */ |
| 643 |
smem: memory@80900000 { |
| 644 |
compatible = "qcom,smem"; |
| 645 |
reg = <0x0 0x80900000 0x0 0x200000>; |
| 646 |
hwlocks = <&tcsr_mutex 3>; |
| 647 |
no-map; |
| 648 |
}; |
| 649 |
|
| 650 |
cpucp_fw_mem: memory@80b00000 { |
| 651 |
reg = <0x0 0x80b00000 0x0 0x100000>; |
| 652 |
no-map; |
| 653 |
}; |
| 654 |
|
| 655 |
cdsp_secure_heap: memory@80c00000 { |
| 656 |
reg = <0x0 0x80c00000 0x0 0x4600000>; |
| 657 |
no-map; |
| 658 |
}; |
| 659 |
|
| 660 |
video_mem: memory@85700000 { |
| 661 |
reg = <0x0 0x85700000 0x0 0x700000>; |
| 662 |
no-map; |
| 663 |
}; |
| 664 |
|
| 665 |
adsp_mem: memory@85e00000 { |
| 666 |
reg = <0x0 0x85e00000 0x0 0x2100000>; |
| 667 |
no-map; |
| 668 |
}; |
| 669 |
|
| 670 |
slpi_mem: memory@88000000 { |
| 671 |
reg = <0x0 0x88000000 0x0 0x1900000>; |
| 672 |
no-map; |
| 673 |
}; |
| 674 |
|
| 675 |
cdsp_mem: memory@89900000 { |
| 676 |
reg = <0x0 0x89900000 0x0 0x2000000>; |
| 677 |
no-map; |
| 678 |
}; |
| 679 |
|
| 680 |
ipa_fw_mem: memory@8b900000 { |
| 681 |
reg = <0x0 0x8b900000 0x0 0x10000>; |
| 682 |
no-map; |
| 683 |
}; |
| 684 |
|
| 685 |
ipa_gsi_mem: memory@8b910000 { |
| 686 |
reg = <0x0 0x8b910000 0x0 0xa000>; |
| 687 |
no-map; |
| 688 |
}; |
| 689 |
|
| 690 |
gpu_micro_code_mem: memory@8b91a000 { |
| 691 |
reg = <0x0 0x8b91a000 0x0 0x2000>; |
| 692 |
no-map; |
| 693 |
}; |
| 694 |
|
| 695 |
spss_region_mem: memory@8ba00000 { |
| 696 |
reg = <0x0 0x8ba00000 0x0 0x180000>; |
| 697 |
no-map; |
| 698 |
}; |
| 699 |
|
| 700 |
/* First part of the "SPU secure shared memory" region */ |
| 701 |
spu_tz_shared_mem: memory@8bb80000 { |
| 702 |
reg = <0x0 0x8bb80000 0x0 0x60000>; |
| 703 |
no-map; |
| 704 |
}; |
| 705 |
|
| 706 |
/* Second part of the "SPU secure shared memory" region */ |
| 707 |
spu_modem_shared_mem: memory@8bbe0000 { |
| 708 |
reg = <0x0 0x8bbe0000 0x0 0x20000>; |
| 709 |
no-map; |
| 710 |
}; |
| 711 |
|
| 712 |
mpss_mem: memory@8bc00000 { |
| 713 |
reg = <0x0 0x8bc00000 0x0 0x13200000>; |
| 714 |
no-map; |
| 715 |
}; |
| 716 |
|
| 717 |
cvp_mem: memory@9ee00000 { |
| 718 |
reg = <0x0 0x9ee00000 0x0 0x700000>; |
| 719 |
no-map; |
| 720 |
}; |
| 721 |
|
| 722 |
camera_mem: memory@9f500000 { |
| 723 |
reg = <0x0 0x9f500000 0x0 0x800000>; |
| 724 |
no-map; |
| 725 |
}; |
| 726 |
|
| 727 |
rmtfs_mem: memory@9fd00000 { |
| 728 |
compatible = "qcom,rmtfs-mem"; |
| 729 |
reg = <0x0 0x9fd00000 0x0 0x280000>; |
| 730 |
no-map; |
| 731 |
|
| 732 |
qcom,client-id = <1>; |
| 733 |
qcom,vmid = <QCOM_SCM_VMID_MSS_MSA>; |
| 734 |
}; |
| 735 |
|
| 736 |
xbl_sc_mem2: memory@a6e00000 { |
| 737 |
reg = <0x0 0xa6e00000 0x0 0x40000>; |
| 738 |
no-map; |
| 739 |
}; |
| 740 |
|
| 741 |
global_sync_mem: memory@a6f00000 { |
| 742 |
reg = <0x0 0xa6f00000 0x0 0x100000>; |
| 743 |
no-map; |
| 744 |
}; |
| 745 |
|
| 746 |
/* uefi region can be reused by APPS */ |
| 747 |
|
| 748 |
/* Linux kernel image is loaded at 0xa0000000 */ |
| 749 |
|
| 750 |
oem_vm_mem: memory@bb000000 { |
| 751 |
reg = <0x0 0xbb000000 0x0 0x5000000>; |
| 752 |
no-map; |
| 753 |
}; |
| 754 |
|
| 755 |
mte_mem: memory@c0000000 { |
| 756 |
reg = <0x0 0xc0000000 0x0 0x20000000>; |
| 757 |
no-map; |
| 758 |
}; |
| 759 |
|
| 760 |
qheebsp_reserved_mem: memory@e0000000 { |
| 761 |
reg = <0x0 0xe0000000 0x0 0x600000>; |
| 762 |
no-map; |
| 763 |
}; |
| 764 |
|
| 765 |
cpusys_vm_mem: memory@e0600000 { |
| 766 |
reg = <0x0 0xe0600000 0x0 0x400000>; |
| 767 |
no-map; |
| 768 |
}; |
| 769 |
|
| 770 |
hyp_reserved_mem: memory@e0a00000 { |
| 771 |
reg = <0x0 0xe0a00000 0x0 0x100000>; |
| 772 |
no-map; |
| 773 |
}; |
| 774 |
|
| 775 |
trust_ui_vm_mem: memory@e0b00000 { |
| 776 |
reg = <0x0 0xe0b00000 0x0 0x4af3000>; |
| 777 |
no-map; |
| 778 |
}; |
| 779 |
|
| 780 |
trust_ui_vm_qrtr: memory@e55f3000 { |
| 781 |
reg = <0x0 0xe55f3000 0x0 0x9000>; |
| 782 |
no-map; |
| 783 |
}; |
| 784 |
|
| 785 |
trust_ui_vm_vblk0_ring: memory@e55fc000 { |
| 786 |
reg = <0x0 0xe55fc000 0x0 0x4000>; |
| 787 |
no-map; |
| 788 |
}; |
| 789 |
|
| 790 |
trust_ui_vm_swiotlb: memory@e5600000 { |
| 791 |
reg = <0x0 0xe5600000 0x0 0x100000>; |
| 792 |
no-map; |
| 793 |
}; |
| 794 |
|
| 795 |
tz_stat_mem: memory@e8800000 { |
| 796 |
reg = <0x0 0xe8800000 0x0 0x100000>; |
| 797 |
no-map; |
| 798 |
}; |
| 799 |
|
| 800 |
tags_mem: memory@e8900000 { |
| 801 |
reg = <0x0 0xe8900000 0x0 0x1200000>; |
| 802 |
no-map; |
| 803 |
}; |
| 804 |
|
| 805 |
qtee_mem: memory@e9b00000 { |
| 806 |
reg = <0x0 0xe9b00000 0x0 0x500000>; |
| 807 |
no-map; |
| 808 |
}; |
| 809 |
|
| 810 |
trusted_apps_mem: memory@ea000000 { |
| 811 |
reg = <0x0 0xea000000 0x0 0x3900000>; |
| 812 |
no-map; |
| 813 |
}; |
| 814 |
|
| 815 |
trusted_apps_ext_mem: memory@ed900000 { |
| 816 |
reg = <0x0 0xed900000 0x0 0x3b00000>; |
| 817 |
no-map; |
| 818 |
}; |
| 819 |
}; |
| 820 |
|
| 821 |
smp2p-adsp { |
| 822 |
compatible = "qcom,smp2p"; |
| 823 |
qcom,smem = <443>, <429>; |
| 824 |
interrupts-extended = <&ipcc IPCC_CLIENT_LPASS |
| 825 |
IPCC_MPROC_SIGNAL_SMP2P |
| 826 |
IRQ_TYPE_EDGE_RISING>; |
| 827 |
mboxes = <&ipcc IPCC_CLIENT_LPASS |
| 828 |
IPCC_MPROC_SIGNAL_SMP2P>; |
| 829 |
|
| 830 |
qcom,local-pid = <0>; |
| 831 |
qcom,remote-pid = <2>; |
| 832 |
|
| 833 |
smp2p_adsp_out: master-kernel { |
| 834 |
qcom,entry-name = "master-kernel"; |
| 835 |
#qcom,smem-state-cells = <1>; |
| 836 |
}; |
| 837 |
|
| 838 |
smp2p_adsp_in: slave-kernel { |
| 839 |
qcom,entry-name = "slave-kernel"; |
| 840 |
interrupt-controller; |
| 841 |
#interrupt-cells = <2>; |
| 842 |
}; |
| 843 |
}; |
| 844 |
|
| 845 |
smp2p-cdsp { |
| 846 |
compatible = "qcom,smp2p"; |
| 847 |
qcom,smem = <94>, <432>; |
| 848 |
interrupts-extended = <&ipcc IPCC_CLIENT_CDSP |
| 849 |
IPCC_MPROC_SIGNAL_SMP2P |
| 850 |
IRQ_TYPE_EDGE_RISING>; |
| 851 |
mboxes = <&ipcc IPCC_CLIENT_CDSP |
| 852 |
IPCC_MPROC_SIGNAL_SMP2P>; |
| 853 |
|
| 854 |
qcom,local-pid = <0>; |
| 855 |
qcom,remote-pid = <5>; |
| 856 |
|
| 857 |
smp2p_cdsp_out: master-kernel { |
| 858 |
qcom,entry-name = "master-kernel"; |
| 859 |
#qcom,smem-state-cells = <1>; |
| 860 |
}; |
| 861 |
|
| 862 |
smp2p_cdsp_in: slave-kernel { |
| 863 |
qcom,entry-name = "slave-kernel"; |
| 864 |
interrupt-controller; |
| 865 |
#interrupt-cells = <2>; |
| 866 |
}; |
| 867 |
}; |
| 868 |
|
| 869 |
smp2p-modem { |
| 870 |
compatible = "qcom,smp2p"; |
| 871 |
qcom,smem = <435>, <428>; |
| 872 |
interrupts-extended = <&ipcc IPCC_CLIENT_MPSS |
| 873 |
IPCC_MPROC_SIGNAL_SMP2P |
| 874 |
IRQ_TYPE_EDGE_RISING>; |
| 875 |
mboxes = <&ipcc IPCC_CLIENT_MPSS |
| 876 |
IPCC_MPROC_SIGNAL_SMP2P>; |
| 877 |
|
| 878 |
qcom,local-pid = <0>; |
| 879 |
qcom,remote-pid = <1>; |
| 880 |
|
| 881 |
smp2p_modem_out: master-kernel { |
| 882 |
qcom,entry-name = "master-kernel"; |
| 883 |
#qcom,smem-state-cells = <1>; |
| 884 |
}; |
| 885 |
|
| 886 |
smp2p_modem_in: slave-kernel { |
| 887 |
qcom,entry-name = "slave-kernel"; |
| 888 |
interrupt-controller; |
| 889 |
#interrupt-cells = <2>; |
| 890 |
}; |
| 891 |
|
| 892 |
ipa_smp2p_out: ipa-ap-to-modem { |
| 893 |
qcom,entry-name = "ipa"; |
| 894 |
#qcom,smem-state-cells = <1>; |
| 895 |
}; |
| 896 |
|
| 897 |
ipa_smp2p_in: ipa-modem-to-ap { |
| 898 |
qcom,entry-name = "ipa"; |
| 899 |
interrupt-controller; |
| 900 |
#interrupt-cells = <2>; |
| 901 |
}; |
| 902 |
}; |
| 903 |
|
| 904 |
smp2p-slpi { |
| 905 |
compatible = "qcom,smp2p"; |
| 906 |
qcom,smem = <481>, <430>; |
| 907 |
interrupts-extended = <&ipcc IPCC_CLIENT_SLPI |
| 908 |
IPCC_MPROC_SIGNAL_SMP2P |
| 909 |
IRQ_TYPE_EDGE_RISING>; |
| 910 |
mboxes = <&ipcc IPCC_CLIENT_SLPI |
| 911 |
IPCC_MPROC_SIGNAL_SMP2P>; |
| 912 |
|
| 913 |
qcom,local-pid = <0>; |
| 914 |
qcom,remote-pid = <3>; |
| 915 |
|
| 916 |
smp2p_slpi_out: master-kernel { |
| 917 |
qcom,entry-name = "master-kernel"; |
| 918 |
#qcom,smem-state-cells = <1>; |
| 919 |
}; |
| 920 |
|
| 921 |
smp2p_slpi_in: slave-kernel { |
| 922 |
qcom,entry-name = "slave-kernel"; |
| 923 |
interrupt-controller; |
| 924 |
#interrupt-cells = <2>; |
| 925 |
}; |
| 926 |
}; |
| 927 |
|
| 928 |
soc: soc@0 { |
| 929 |
#address-cells = <2>; |
| 930 |
#size-cells = <2>; |
| 931 |
ranges = <0 0 0 0 0x10 0>; |
| 932 |
dma-ranges = <0 0 0 0 0x10 0>; |
| 933 |
compatible = "simple-bus"; |
| 934 |
|
| 935 |
gcc: clock-controller@100000 { |
| 936 |
compatible = "qcom,gcc-sm8450"; |
| 937 |
reg = <0x0 0x00100000 0x0 0x1f4200>; |
| 938 |
#clock-cells = <1>; |
| 939 |
#reset-cells = <1>; |
| 940 |
#power-domain-cells = <1>; |
| 941 |
clocks = <&rpmhcc RPMH_CXO_CLK>, |
| 942 |
<&sleep_clk>, |
| 943 |
<&pcie0_phy>, |
| 944 |
<&pcie1_phy QMP_PCIE_PIPE_CLK>, |
| 945 |
<&pcie1_phy QMP_PCIE_PHY_AUX_CLK>, |
| 946 |
<&ufs_mem_phy 0>, |
| 947 |
<&ufs_mem_phy 1>, |
| 948 |
<&ufs_mem_phy 2>, |
| 949 |
<&usb_1_qmpphy QMP_USB43DP_USB3_PIPE_CLK>; |
| 950 |
clock-names = "bi_tcxo", |
| 951 |
"sleep_clk", |
| 952 |
"pcie_0_pipe_clk", |
| 953 |
"pcie_1_pipe_clk", |
| 954 |
"pcie_1_phy_aux_clk", |
| 955 |
"ufs_phy_rx_symbol_0_clk", |
| 956 |
"ufs_phy_rx_symbol_1_clk", |
| 957 |
"ufs_phy_tx_symbol_0_clk", |
| 958 |
"usb3_phy_wrapper_gcc_usb30_pipe_clk"; |
| 959 |
}; |
| 960 |
|
| 961 |
gpi_dma2: dma-controller@800000 { |
| 962 |
compatible = "qcom,sm8450-gpi-dma", "qcom,sm6350-gpi-dma"; |
| 963 |
#dma-cells = <3>; |
| 964 |
reg = <0 0x00800000 0 0x60000>; |
| 965 |
interrupts = <GIC_SPI 588 IRQ_TYPE_LEVEL_HIGH>, |
| 966 |
<GIC_SPI 589 IRQ_TYPE_LEVEL_HIGH>, |
| 967 |
<GIC_SPI 590 IRQ_TYPE_LEVEL_HIGH>, |
| 968 |
<GIC_SPI 591 IRQ_TYPE_LEVEL_HIGH>, |
| 969 |
<GIC_SPI 592 IRQ_TYPE_LEVEL_HIGH>, |
| 970 |
<GIC_SPI 593 IRQ_TYPE_LEVEL_HIGH>, |
| 971 |
<GIC_SPI 594 IRQ_TYPE_LEVEL_HIGH>, |
| 972 |
<GIC_SPI 595 IRQ_TYPE_LEVEL_HIGH>, |
| 973 |
<GIC_SPI 596 IRQ_TYPE_LEVEL_HIGH>, |
| 974 |
<GIC_SPI 597 IRQ_TYPE_LEVEL_HIGH>, |
| 975 |
<GIC_SPI 598 IRQ_TYPE_LEVEL_HIGH>, |
| 976 |
<GIC_SPI 599 IRQ_TYPE_LEVEL_HIGH>; |
| 977 |
dma-channels = <12>; |
| 978 |
dma-channel-mask = <0x7e>; |
| 979 |
iommus = <&apps_smmu 0x496 0x0>; |
| 980 |
status = "disabled"; |
| 981 |
}; |
| 982 |
|
| 983 |
qupv3_id_2: geniqup@8c0000 { |
| 984 |
compatible = "qcom,geni-se-qup"; |
| 985 |
reg = <0x0 0x008c0000 0x0 0x2000>; |
| 986 |
clock-names = "m-ahb", "s-ahb"; |
| 987 |
clocks = <&gcc GCC_QUPV3_WRAP_2_M_AHB_CLK>, |
| 988 |
<&gcc GCC_QUPV3_WRAP_2_S_AHB_CLK>; |
| 989 |
iommus = <&apps_smmu 0x483 0x0>; |
| 990 |
#address-cells = <2>; |
| 991 |
#size-cells = <2>; |
| 992 |
ranges; |
| 993 |
status = "disabled"; |
| 994 |
|
| 995 |
i2c15: i2c@880000 { |
| 996 |
compatible = "qcom,geni-i2c"; |
| 997 |
reg = <0x0 0x00880000 0x0 0x4000>; |
| 998 |
clock-names = "se"; |
| 999 |
clocks = <&gcc GCC_QUPV3_WRAP2_S0_CLK>; |
| 1000 |
pinctrl-names = "default"; |
| 1001 |
pinctrl-0 = <&qup_i2c15_data_clk>; |
| 1002 |
interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>; |
| 1003 |
#address-cells = <1>; |
| 1004 |
#size-cells = <0>; |
| 1005 |
interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>, |
| 1006 |
<&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>, |
| 1007 |
<&aggre2_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>; |
| 1008 |
interconnect-names = "qup-core", "qup-config", "qup-memory"; |
| 1009 |
dmas = <&gpi_dma2 0 0 QCOM_GPI_I2C>, |
| 1010 |
<&gpi_dma2 1 0 QCOM_GPI_I2C>; |
| 1011 |
dma-names = "tx", "rx"; |
| 1012 |
status = "disabled"; |
| 1013 |
}; |
| 1014 |
|
| 1015 |
spi15: spi@880000 { |
| 1016 |
compatible = "qcom,geni-spi"; |
| 1017 |
reg = <0x0 0x00880000 0x0 0x4000>; |
| 1018 |
clock-names = "se"; |
| 1019 |
clocks = <&gcc GCC_QUPV3_WRAP2_S0_CLK>; |
| 1020 |
interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>; |
| 1021 |
pinctrl-names = "default"; |
| 1022 |
pinctrl-0 = <&qup_spi15_data_clk>, <&qup_spi15_cs>; |
| 1023 |
interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>, |
| 1024 |
<&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>; |
| 1025 |
interconnect-names = "qup-core", "qup-config"; |
| 1026 |
dmas = <&gpi_dma2 0 0 QCOM_GPI_SPI>, |
| 1027 |
<&gpi_dma2 1 0 QCOM_GPI_SPI>; |
| 1028 |
dma-names = "tx", "rx"; |
| 1029 |
#address-cells = <1>; |
| 1030 |
#size-cells = <0>; |
| 1031 |
status = "disabled"; |
| 1032 |
}; |
| 1033 |
|
| 1034 |
i2c16: i2c@884000 { |
| 1035 |
compatible = "qcom,geni-i2c"; |
| 1036 |
reg = <0x0 0x00884000 0x0 0x4000>; |
| 1037 |
clock-names = "se"; |
| 1038 |
clocks = <&gcc GCC_QUPV3_WRAP2_S1_CLK>; |
| 1039 |
pinctrl-names = "default"; |
| 1040 |
pinctrl-0 = <&qup_i2c16_data_clk>; |
| 1041 |
interrupts = <GIC_SPI 583 IRQ_TYPE_LEVEL_HIGH>; |
| 1042 |
#address-cells = <1>; |
| 1043 |
#size-cells = <0>; |
| 1044 |
interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>, |
| 1045 |
<&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>, |
| 1046 |
<&aggre2_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>; |
| 1047 |
interconnect-names = "qup-core", "qup-config", "qup-memory"; |
| 1048 |
dmas = <&gpi_dma2 0 1 QCOM_GPI_I2C>, |
| 1049 |
<&gpi_dma2 1 1 QCOM_GPI_I2C>; |
| 1050 |
dma-names = "tx", "rx"; |
| 1051 |
status = "disabled"; |
| 1052 |
}; |
| 1053 |
|
| 1054 |
spi16: spi@884000 { |
| 1055 |
compatible = "qcom,geni-spi"; |
| 1056 |
reg = <0x0 0x00884000 0x0 0x4000>; |
| 1057 |
clock-names = "se"; |
| 1058 |
clocks = <&gcc GCC_QUPV3_WRAP2_S1_CLK>; |
| 1059 |
interrupts = <GIC_SPI 583 IRQ_TYPE_LEVEL_HIGH>; |
| 1060 |
pinctrl-names = "default"; |
| 1061 |
pinctrl-0 = <&qup_spi16_data_clk>, <&qup_spi16_cs>; |
| 1062 |
interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>, |
| 1063 |
<&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>; |
| 1064 |
interconnect-names = "qup-core", "qup-config"; |
| 1065 |
dmas = <&gpi_dma2 0 1 QCOM_GPI_SPI>, |
| 1066 |
<&gpi_dma2 1 1 QCOM_GPI_SPI>; |
| 1067 |
dma-names = "tx", "rx"; |
| 1068 |
#address-cells = <1>; |
| 1069 |
#size-cells = <0>; |
| 1070 |
status = "disabled"; |
| 1071 |
}; |
| 1072 |
|
| 1073 |
i2c17: i2c@888000 { |
| 1074 |
compatible = "qcom,geni-i2c"; |
| 1075 |
reg = <0x0 0x00888000 0x0 0x4000>; |
| 1076 |
clock-names = "se"; |
| 1077 |
clocks = <&gcc GCC_QUPV3_WRAP2_S2_CLK>; |
| 1078 |
pinctrl-names = "default"; |
| 1079 |
pinctrl-0 = <&qup_i2c17_data_clk>; |
| 1080 |
interrupts = <GIC_SPI 584 IRQ_TYPE_LEVEL_HIGH>; |
| 1081 |
#address-cells = <1>; |
| 1082 |
#size-cells = <0>; |
| 1083 |
interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>, |
| 1084 |
<&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>, |
| 1085 |
<&aggre2_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>; |
| 1086 |
interconnect-names = "qup-core", "qup-config", "qup-memory"; |
| 1087 |
dmas = <&gpi_dma2 0 2 QCOM_GPI_I2C>, |
| 1088 |
<&gpi_dma2 1 2 QCOM_GPI_I2C>; |
| 1089 |
dma-names = "tx", "rx"; |
| 1090 |
status = "disabled"; |
| 1091 |
}; |
| 1092 |
|
| 1093 |
spi17: spi@888000 { |
| 1094 |
compatible = "qcom,geni-spi"; |
| 1095 |
reg = <0x0 0x00888000 0x0 0x4000>; |
| 1096 |
clock-names = "se"; |
| 1097 |
clocks = <&gcc GCC_QUPV3_WRAP2_S2_CLK>; |
| 1098 |
interrupts = <GIC_SPI 584 IRQ_TYPE_LEVEL_HIGH>; |
| 1099 |
pinctrl-names = "default"; |
| 1100 |
pinctrl-0 = <&qup_spi17_data_clk>, <&qup_spi17_cs>; |
| 1101 |
interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>, |
| 1102 |
<&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>; |
| 1103 |
interconnect-names = "qup-core", "qup-config"; |
| 1104 |
dmas = <&gpi_dma2 0 2 QCOM_GPI_SPI>, |
| 1105 |
<&gpi_dma2 1 2 QCOM_GPI_SPI>; |
| 1106 |
dma-names = "tx", "rx"; |
| 1107 |
#address-cells = <1>; |
| 1108 |
#size-cells = <0>; |
| 1109 |
status = "disabled"; |
| 1110 |
}; |
| 1111 |
|
| 1112 |
i2c18: i2c@88c000 { |
| 1113 |
compatible = "qcom,geni-i2c"; |
| 1114 |
reg = <0x0 0x0088c000 0x0 0x4000>; |
| 1115 |
clock-names = "se"; |
| 1116 |
clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>; |
| 1117 |
pinctrl-names = "default"; |
| 1118 |
pinctrl-0 = <&qup_i2c18_data_clk>; |
| 1119 |
interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>; |
| 1120 |
#address-cells = <1>; |
| 1121 |
#size-cells = <0>; |
| 1122 |
interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>, |
| 1123 |
<&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>, |
| 1124 |
<&aggre2_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>; |
| 1125 |
interconnect-names = "qup-core", "qup-config", "qup-memory"; |
| 1126 |
dmas = <&gpi_dma2 0 3 QCOM_GPI_I2C>, |
| 1127 |
<&gpi_dma2 1 3 QCOM_GPI_I2C>; |
| 1128 |
dma-names = "tx", "rx"; |
| 1129 |
status = "disabled"; |
| 1130 |
}; |
| 1131 |
|
| 1132 |
spi18: spi@88c000 { |
| 1133 |
compatible = "qcom,geni-spi"; |
| 1134 |
reg = <0 0x0088c000 0 0x4000>; |
| 1135 |
clock-names = "se"; |
| 1136 |
clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>; |
| 1137 |
interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>; |
| 1138 |
pinctrl-names = "default"; |
| 1139 |
pinctrl-0 = <&qup_spi18_data_clk>, <&qup_spi18_cs>; |
| 1140 |
interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>, |
| 1141 |
<&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>; |
| 1142 |
interconnect-names = "qup-core", "qup-config"; |
| 1143 |
dmas = <&gpi_dma2 0 3 QCOM_GPI_I2C>, |
| 1144 |
<&gpi_dma2 1 3 QCOM_GPI_I2C>; |
| 1145 |
dma-names = "tx", "rx"; |
| 1146 |
#address-cells = <1>; |
| 1147 |
#size-cells = <0>; |
| 1148 |
status = "disabled"; |
| 1149 |
}; |
| 1150 |
|
| 1151 |
i2c19: i2c@890000 { |
| 1152 |
compatible = "qcom,geni-i2c"; |
| 1153 |
reg = <0x0 0x00890000 0x0 0x4000>; |
| 1154 |
clock-names = "se"; |
| 1155 |
clocks = <&gcc GCC_QUPV3_WRAP2_S4_CLK>; |
| 1156 |
pinctrl-names = "default"; |
| 1157 |
pinctrl-0 = <&qup_i2c19_data_clk>; |
| 1158 |
interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>; |
| 1159 |
#address-cells = <1>; |
| 1160 |
#size-cells = <0>; |
| 1161 |
interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>, |
| 1162 |
<&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>, |
| 1163 |
<&aggre2_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>; |
| 1164 |
interconnect-names = "qup-core", "qup-config", "qup-memory"; |
| 1165 |
dmas = <&gpi_dma2 0 4 QCOM_GPI_I2C>, |
| 1166 |
<&gpi_dma2 1 4 QCOM_GPI_I2C>; |
| 1167 |
dma-names = "tx", "rx"; |
| 1168 |
status = "disabled"; |
| 1169 |
}; |
| 1170 |
|
| 1171 |
spi19: spi@890000 { |
| 1172 |
compatible = "qcom,geni-spi"; |
| 1173 |
reg = <0 0x00890000 0 0x4000>; |
| 1174 |
clock-names = "se"; |
| 1175 |
clocks = <&gcc GCC_QUPV3_WRAP2_S4_CLK>; |
| 1176 |
interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>; |
| 1177 |
pinctrl-names = "default"; |
| 1178 |
pinctrl-0 = <&qup_spi19_data_clk>, <&qup_spi19_cs>; |
| 1179 |
interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>, |
| 1180 |
<&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>; |
| 1181 |
interconnect-names = "qup-core", "qup-config"; |
| 1182 |
dmas = <&gpi_dma2 0 4 QCOM_GPI_I2C>, |
| 1183 |
<&gpi_dma2 1 4 QCOM_GPI_I2C>; |
| 1184 |
dma-names = "tx", "rx"; |
| 1185 |
#address-cells = <1>; |
| 1186 |
#size-cells = <0>; |
| 1187 |
status = "disabled"; |
| 1188 |
}; |
| 1189 |
|
| 1190 |
i2c20: i2c@894000 { |
| 1191 |
compatible = "qcom,geni-i2c"; |
| 1192 |
reg = <0x0 0x00894000 0x0 0x4000>; |
| 1193 |
clock-names = "se"; |
| 1194 |
clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>; |
| 1195 |
pinctrl-names = "default"; |
| 1196 |
pinctrl-0 = <&qup_i2c20_data_clk>; |
| 1197 |
interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>; |
| 1198 |
#address-cells = <1>; |
| 1199 |
#size-cells = <0>; |
| 1200 |
interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>, |
| 1201 |
<&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>, |
| 1202 |
<&aggre2_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>; |
| 1203 |
interconnect-names = "qup-core", "qup-config", "qup-memory"; |
| 1204 |
dmas = <&gpi_dma2 0 5 QCOM_GPI_I2C>, |
| 1205 |
<&gpi_dma2 1 5 QCOM_GPI_I2C>; |
| 1206 |
dma-names = "tx", "rx"; |
| 1207 |
status = "disabled"; |
| 1208 |
}; |
| 1209 |
|
| 1210 |
uart20: serial@894000 { |
| 1211 |
compatible = "qcom,geni-uart"; |
| 1212 |
reg = <0 0x00894000 0 0x4000>; |
| 1213 |
clock-names = "se"; |
| 1214 |
clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>; |
| 1215 |
pinctrl-names = "default"; |
| 1216 |
pinctrl-0 = <&qup_uart20_default>; |
| 1217 |
interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>; |
| 1218 |
interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS |
| 1219 |
&clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>, |
| 1220 |
<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS |
| 1221 |
&config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>; |
| 1222 |
interconnect-names = "qup-core", |
| 1223 |
"qup-config"; |
| 1224 |
status = "disabled"; |
| 1225 |
}; |
| 1226 |
|
| 1227 |
spi20: spi@894000 { |
| 1228 |
compatible = "qcom,geni-spi"; |
| 1229 |
reg = <0 0x00894000 0 0x4000>; |
| 1230 |
clock-names = "se"; |
| 1231 |
clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>; |
| 1232 |
interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>; |
| 1233 |
pinctrl-names = "default"; |
| 1234 |
pinctrl-0 = <&qup_spi20_data_clk>, <&qup_spi20_cs>; |
| 1235 |
interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>, |
| 1236 |
<&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>; |
| 1237 |
interconnect-names = "qup-core", "qup-config"; |
| 1238 |
dmas = <&gpi_dma2 0 5 QCOM_GPI_SPI>, |
| 1239 |
<&gpi_dma2 1 5 QCOM_GPI_SPI>; |
| 1240 |
dma-names = "tx", "rx"; |
| 1241 |
#address-cells = <1>; |
| 1242 |
#size-cells = <0>; |
| 1243 |
status = "disabled"; |
| 1244 |
}; |
| 1245 |
|
| 1246 |
i2c21: i2c@898000 { |
| 1247 |
compatible = "qcom,geni-i2c"; |
| 1248 |
reg = <0x0 0x00898000 0x0 0x4000>; |
| 1249 |
clock-names = "se"; |
| 1250 |
clocks = <&gcc GCC_QUPV3_WRAP2_S6_CLK>; |
| 1251 |
pinctrl-names = "default"; |
| 1252 |
pinctrl-0 = <&qup_i2c21_data_clk>; |
| 1253 |
interrupts = <GIC_SPI 579 IRQ_TYPE_LEVEL_HIGH>; |
| 1254 |
#address-cells = <1>; |
| 1255 |
#size-cells = <0>; |
| 1256 |
interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>, |
| 1257 |
<&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>, |
| 1258 |
<&aggre2_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>; |
| 1259 |
interconnect-names = "qup-core", "qup-config", "qup-memory"; |
| 1260 |
dmas = <&gpi_dma2 0 6 QCOM_GPI_I2C>, |
| 1261 |
<&gpi_dma2 1 6 QCOM_GPI_I2C>; |
| 1262 |
dma-names = "tx", "rx"; |
| 1263 |
status = "disabled"; |
| 1264 |
}; |
| 1265 |
|
| 1266 |
spi21: spi@898000 { |
| 1267 |
compatible = "qcom,geni-spi"; |
| 1268 |
reg = <0 0x00898000 0 0x4000>; |
| 1269 |
clock-names = "se"; |
| 1270 |
clocks = <&gcc GCC_QUPV3_WRAP2_S6_CLK>; |
| 1271 |
interrupts = <GIC_SPI 579 IRQ_TYPE_LEVEL_HIGH>; |
| 1272 |
pinctrl-names = "default"; |
| 1273 |
pinctrl-0 = <&qup_spi21_data_clk>, <&qup_spi21_cs>; |
| 1274 |
interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>, |
| 1275 |
<&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>; |
| 1276 |
interconnect-names = "qup-core", "qup-config"; |
| 1277 |
dmas = <&gpi_dma2 0 6 QCOM_GPI_SPI>, |
| 1278 |
<&gpi_dma2 1 6 QCOM_GPI_SPI>; |
| 1279 |
dma-names = "tx", "rx"; |
| 1280 |
#address-cells = <1>; |
| 1281 |
#size-cells = <0>; |
| 1282 |
status = "disabled"; |
| 1283 |
}; |
| 1284 |
}; |
| 1285 |
|
| 1286 |
gpi_dma0: dma-controller@900000 { |
| 1287 |
compatible = "qcom,sm8450-gpi-dma", "qcom,sm6350-gpi-dma"; |
| 1288 |
#dma-cells = <3>; |
| 1289 |
reg = <0 0x00900000 0 0x60000>; |
| 1290 |
interrupts = <GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>, |
| 1291 |
<GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>, |
| 1292 |
<GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>, |
| 1293 |
<GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>, |
| 1294 |
<GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH>, |
| 1295 |
<GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>, |
| 1296 |
<GIC_SPI 250 IRQ_TYPE_LEVEL_HIGH>, |
| 1297 |
<GIC_SPI 251 IRQ_TYPE_LEVEL_HIGH>, |
| 1298 |
<GIC_SPI 252 IRQ_TYPE_LEVEL_HIGH>, |
| 1299 |
<GIC_SPI 253 IRQ_TYPE_LEVEL_HIGH>, |
| 1300 |
<GIC_SPI 254 IRQ_TYPE_LEVEL_HIGH>, |
| 1301 |
<GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>; |
| 1302 |
dma-channels = <12>; |
| 1303 |
dma-channel-mask = <0x7e>; |
| 1304 |
iommus = <&apps_smmu 0x5b6 0x0>; |
| 1305 |
status = "disabled"; |
| 1306 |
}; |
| 1307 |
|
| 1308 |
qupv3_id_0: geniqup@9c0000 { |
| 1309 |
compatible = "qcom,geni-se-qup"; |
| 1310 |
reg = <0x0 0x009c0000 0x0 0x2000>; |
| 1311 |
clock-names = "m-ahb", "s-ahb"; |
| 1312 |
clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>, |
| 1313 |
<&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>; |
| 1314 |
iommus = <&apps_smmu 0x5a3 0x0>; |
| 1315 |
interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>; |
| 1316 |
interconnect-names = "qup-core"; |
| 1317 |
#address-cells = <2>; |
| 1318 |
#size-cells = <2>; |
| 1319 |
ranges; |
| 1320 |
status = "disabled"; |
| 1321 |
|
| 1322 |
i2c0: i2c@980000 { |
| 1323 |
compatible = "qcom,geni-i2c"; |
| 1324 |
reg = <0x0 0x00980000 0x0 0x4000>; |
| 1325 |
clock-names = "se"; |
| 1326 |
clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>; |
| 1327 |
pinctrl-names = "default"; |
| 1328 |
pinctrl-0 = <&qup_i2c0_data_clk>; |
| 1329 |
interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>; |
| 1330 |
#address-cells = <1>; |
| 1331 |
#size-cells = <0>; |
| 1332 |
interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, |
| 1333 |
<&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>, |
| 1334 |
<&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; |
| 1335 |
interconnect-names = "qup-core", "qup-config", "qup-memory"; |
| 1336 |
dmas = <&gpi_dma0 0 0 QCOM_GPI_I2C>, |
| 1337 |
<&gpi_dma0 1 0 QCOM_GPI_I2C>; |
| 1338 |
dma-names = "tx", "rx"; |
| 1339 |
status = "disabled"; |
| 1340 |
}; |
| 1341 |
|
| 1342 |
spi0: spi@980000 { |
| 1343 |
compatible = "qcom,geni-spi"; |
| 1344 |
reg = <0x0 0x00980000 0x0 0x4000>; |
| 1345 |
clock-names = "se"; |
| 1346 |
clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>; |
| 1347 |
interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>; |
| 1348 |
pinctrl-names = "default"; |
| 1349 |
pinctrl-0 = <&qup_spi0_data_clk>, <&qup_spi0_cs>; |
| 1350 |
power-domains = <&rpmhpd RPMHPD_CX>; |
| 1351 |
operating-points-v2 = <&qup_opp_table_100mhz>; |
| 1352 |
interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, |
| 1353 |
<&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>, |
| 1354 |
<&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; |
| 1355 |
interconnect-names = "qup-core", "qup-config", "qup-memory"; |
| 1356 |
dmas = <&gpi_dma0 0 0 QCOM_GPI_SPI>, |
| 1357 |
<&gpi_dma0 1 0 QCOM_GPI_SPI>; |
| 1358 |
dma-names = "tx", "rx"; |
| 1359 |
#address-cells = <1>; |
| 1360 |
#size-cells = <0>; |
| 1361 |
status = "disabled"; |
| 1362 |
}; |
| 1363 |
|
| 1364 |
i2c1: i2c@984000 { |
| 1365 |
compatible = "qcom,geni-i2c"; |
| 1366 |
reg = <0x0 0x00984000 0x0 0x4000>; |
| 1367 |
clock-names = "se"; |
| 1368 |
clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>; |
| 1369 |
pinctrl-names = "default"; |
| 1370 |
pinctrl-0 = <&qup_i2c1_data_clk>; |
| 1371 |
interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>; |
| 1372 |
#address-cells = <1>; |
| 1373 |
#size-cells = <0>; |
| 1374 |
interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, |
| 1375 |
<&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>, |
| 1376 |
<&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; |
| 1377 |
interconnect-names = "qup-core", "qup-config", "qup-memory"; |
| 1378 |
dmas = <&gpi_dma0 0 1 QCOM_GPI_I2C>, |
| 1379 |
<&gpi_dma0 1 1 QCOM_GPI_I2C>; |
| 1380 |
dma-names = "tx", "rx"; |
| 1381 |
status = "disabled"; |
| 1382 |
}; |
| 1383 |
|
| 1384 |
spi1: spi@984000 { |
| 1385 |
compatible = "qcom,geni-spi"; |
| 1386 |
reg = <0x0 0x00984000 0x0 0x4000>; |
| 1387 |
clock-names = "se"; |
| 1388 |
clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>; |
| 1389 |
interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>; |
| 1390 |
pinctrl-names = "default"; |
| 1391 |
pinctrl-0 = <&qup_spi1_data_clk>, <&qup_spi1_cs>; |
| 1392 |
interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, |
| 1393 |
<&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>, |
| 1394 |
<&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; |
| 1395 |
interconnect-names = "qup-core", "qup-config", "qup-memory"; |
| 1396 |
dmas = <&gpi_dma0 0 1 QCOM_GPI_SPI>, |
| 1397 |
<&gpi_dma0 1 1 QCOM_GPI_SPI>; |
| 1398 |
dma-names = "tx", "rx"; |
| 1399 |
#address-cells = <1>; |
| 1400 |
#size-cells = <0>; |
| 1401 |
status = "disabled"; |
| 1402 |
}; |
| 1403 |
|
| 1404 |
i2c2: i2c@988000 { |
| 1405 |
compatible = "qcom,geni-i2c"; |
| 1406 |
reg = <0x0 0x00988000 0x0 0x4000>; |
| 1407 |
clock-names = "se"; |
| 1408 |
clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>; |
| 1409 |
pinctrl-names = "default"; |
| 1410 |
pinctrl-0 = <&qup_i2c2_data_clk>; |
| 1411 |
interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>; |
| 1412 |
#address-cells = <1>; |
| 1413 |
#size-cells = <0>; |
| 1414 |
interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, |
| 1415 |
<&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>, |
| 1416 |
<&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; |
| 1417 |
interconnect-names = "qup-core", "qup-config", "qup-memory"; |
| 1418 |
dmas = <&gpi_dma0 0 2 QCOM_GPI_I2C>, |
| 1419 |
<&gpi_dma0 1 2 QCOM_GPI_I2C>; |
| 1420 |
dma-names = "tx", "rx"; |
| 1421 |
status = "disabled"; |
| 1422 |
}; |
| 1423 |
|
| 1424 |
spi2: spi@988000 { |
| 1425 |
compatible = "qcom,geni-spi"; |
| 1426 |
reg = <0x0 0x00988000 0x0 0x4000>; |
| 1427 |
clock-names = "se"; |
| 1428 |
clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>; |
| 1429 |
interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>; |
| 1430 |
pinctrl-names = "default"; |
| 1431 |
pinctrl-0 = <&qup_spi2_data_clk>, <&qup_spi2_cs>; |
| 1432 |
interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, |
| 1433 |
<&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>, |
| 1434 |
<&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; |
| 1435 |
interconnect-names = "qup-core", "qup-config", "qup-memory"; |
| 1436 |
dmas = <&gpi_dma0 0 2 QCOM_GPI_SPI>, |
| 1437 |
<&gpi_dma0 1 2 QCOM_GPI_SPI>; |
| 1438 |
dma-names = "tx", "rx"; |
| 1439 |
#address-cells = <1>; |
| 1440 |
#size-cells = <0>; |
| 1441 |
status = "disabled"; |
| 1442 |
}; |
| 1443 |
|
| 1444 |
|
| 1445 |
i2c3: i2c@98c000 { |
| 1446 |
compatible = "qcom,geni-i2c"; |
| 1447 |
reg = <0x0 0x0098c000 0x0 0x4000>; |
| 1448 |
clock-names = "se"; |
| 1449 |
clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>; |
| 1450 |
pinctrl-names = "default"; |
| 1451 |
pinctrl-0 = <&qup_i2c3_data_clk>; |
| 1452 |
interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>; |
| 1453 |
#address-cells = <1>; |
| 1454 |
#size-cells = <0>; |
| 1455 |
interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, |
| 1456 |
<&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>, |
| 1457 |
<&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; |
| 1458 |
interconnect-names = "qup-core", "qup-config", "qup-memory"; |
| 1459 |
dmas = <&gpi_dma0 0 3 QCOM_GPI_I2C>, |
| 1460 |
<&gpi_dma0 1 3 QCOM_GPI_I2C>; |
| 1461 |
dma-names = "tx", "rx"; |
| 1462 |
status = "disabled"; |
| 1463 |
}; |
| 1464 |
|
| 1465 |
spi3: spi@98c000 { |
| 1466 |
compatible = "qcom,geni-spi"; |
| 1467 |
reg = <0x0 0x0098c000 0x0 0x4000>; |
| 1468 |
clock-names = "se"; |
| 1469 |
clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>; |
| 1470 |
interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>; |
| 1471 |
pinctrl-names = "default"; |
| 1472 |
pinctrl-0 = <&qup_spi3_data_clk>, <&qup_spi3_cs>; |
| 1473 |
interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, |
| 1474 |
<&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>, |
| 1475 |
<&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; |
| 1476 |
interconnect-names = "qup-core", "qup-config", "qup-memory"; |
| 1477 |
dmas = <&gpi_dma0 0 3 QCOM_GPI_SPI>, |
| 1478 |
<&gpi_dma0 1 3 QCOM_GPI_SPI>; |
| 1479 |
dma-names = "tx", "rx"; |
| 1480 |
#address-cells = <1>; |
| 1481 |
#size-cells = <0>; |
| 1482 |
status = "disabled"; |
| 1483 |
}; |
| 1484 |
|
| 1485 |
i2c4: i2c@990000 { |
| 1486 |
compatible = "qcom,geni-i2c"; |
| 1487 |
reg = <0x0 0x00990000 0x0 0x4000>; |
| 1488 |
clock-names = "se"; |
| 1489 |
clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>; |
| 1490 |
pinctrl-names = "default"; |
| 1491 |
pinctrl-0 = <&qup_i2c4_data_clk>; |
| 1492 |
interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>; |
| 1493 |
#address-cells = <1>; |
| 1494 |
#size-cells = <0>; |
| 1495 |
interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, |
| 1496 |
<&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>, |
| 1497 |
<&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; |
| 1498 |
interconnect-names = "qup-core", "qup-config", "qup-memory"; |
| 1499 |
dmas = <&gpi_dma0 0 4 QCOM_GPI_I2C>, |
| 1500 |
<&gpi_dma0 1 4 QCOM_GPI_I2C>; |
| 1501 |
dma-names = "tx", "rx"; |
| 1502 |
status = "disabled"; |
| 1503 |
}; |
| 1504 |
|
| 1505 |
spi4: spi@990000 { |
| 1506 |
compatible = "qcom,geni-spi"; |
| 1507 |
reg = <0x0 0x00990000 0x0 0x4000>; |
| 1508 |
clock-names = "se"; |
| 1509 |
clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>; |
| 1510 |
interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>; |
| 1511 |
pinctrl-names = "default"; |
| 1512 |
pinctrl-0 = <&qup_spi4_data_clk>, <&qup_spi4_cs>; |
| 1513 |
power-domains = <&rpmhpd RPMHPD_CX>; |
| 1514 |
operating-points-v2 = <&qup_opp_table_100mhz>; |
| 1515 |
interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, |
| 1516 |
<&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>, |
| 1517 |
<&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; |
| 1518 |
interconnect-names = "qup-core", "qup-config", "qup-memory"; |
| 1519 |
dmas = <&gpi_dma0 0 4 QCOM_GPI_SPI>, |
| 1520 |
<&gpi_dma0 1 4 QCOM_GPI_SPI>; |
| 1521 |
dma-names = "tx", "rx"; |
| 1522 |
#address-cells = <1>; |
| 1523 |
#size-cells = <0>; |
| 1524 |
status = "disabled"; |
| 1525 |
}; |
| 1526 |
|
| 1527 |
i2c5: i2c@994000 { |
| 1528 |
compatible = "qcom,geni-i2c"; |
| 1529 |
reg = <0x0 0x00994000 0x0 0x4000>; |
| 1530 |
clock-names = "se"; |
| 1531 |
clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>; |
| 1532 |
pinctrl-names = "default"; |
| 1533 |
pinctrl-0 = <&qup_i2c5_data_clk>; |
| 1534 |
interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>; |
| 1535 |
#address-cells = <1>; |
| 1536 |
#size-cells = <0>; |
| 1537 |
interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, |
| 1538 |
<&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>, |
| 1539 |
<&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; |
| 1540 |
interconnect-names = "qup-core", "qup-config", "qup-memory"; |
| 1541 |
dmas = <&gpi_dma0 0 5 QCOM_GPI_I2C>, |
| 1542 |
<&gpi_dma0 1 5 QCOM_GPI_I2C>; |
| 1543 |
dma-names = "tx", "rx"; |
| 1544 |
status = "disabled"; |
| 1545 |
}; |
| 1546 |
|
| 1547 |
spi5: spi@994000 { |
| 1548 |
compatible = "qcom,geni-spi"; |
| 1549 |
reg = <0x0 0x00994000 0x0 0x4000>; |
| 1550 |
clock-names = "se"; |
| 1551 |
clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>; |
| 1552 |
interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>; |
| 1553 |
pinctrl-names = "default"; |
| 1554 |
pinctrl-0 = <&qup_spi5_data_clk>, <&qup_spi5_cs>; |
| 1555 |
interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, |
| 1556 |
<&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>, |
| 1557 |
<&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; |
| 1558 |
interconnect-names = "qup-core", "qup-config", "qup-memory"; |
| 1559 |
dmas = <&gpi_dma0 0 5 QCOM_GPI_SPI>, |
| 1560 |
<&gpi_dma0 1 5 QCOM_GPI_SPI>; |
| 1561 |
dma-names = "tx", "rx"; |
| 1562 |
#address-cells = <1>; |
| 1563 |
#size-cells = <0>; |
| 1564 |
status = "disabled"; |
| 1565 |
}; |
| 1566 |
|
| 1567 |
|
| 1568 |
i2c6: i2c@998000 { |
| 1569 |
compatible = "qcom,geni-i2c"; |
| 1570 |
reg = <0x0 0x00998000 0x0 0x4000>; |
| 1571 |
clock-names = "se"; |
| 1572 |
clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>; |
| 1573 |
pinctrl-names = "default"; |
| 1574 |
pinctrl-0 = <&qup_i2c6_data_clk>; |
| 1575 |
interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>; |
| 1576 |
#address-cells = <1>; |
| 1577 |
#size-cells = <0>; |
| 1578 |
interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, |
| 1579 |
<&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>, |
| 1580 |
<&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; |
| 1581 |
interconnect-names = "qup-core", "qup-config", "qup-memory"; |
| 1582 |
dmas = <&gpi_dma0 0 6 QCOM_GPI_I2C>, |
| 1583 |
<&gpi_dma0 1 6 QCOM_GPI_I2C>; |
| 1584 |
dma-names = "tx", "rx"; |
| 1585 |
status = "disabled"; |
| 1586 |
}; |
| 1587 |
|
| 1588 |
spi6: spi@998000 { |
| 1589 |
compatible = "qcom,geni-spi"; |
| 1590 |
reg = <0x0 0x00998000 0x0 0x4000>; |
| 1591 |
clock-names = "se"; |
| 1592 |
clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>; |
| 1593 |
interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>; |
| 1594 |
pinctrl-names = "default"; |
| 1595 |
pinctrl-0 = <&qup_spi6_data_clk>, <&qup_spi6_cs>; |
| 1596 |
interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, |
| 1597 |
<&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>, |
| 1598 |
<&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; |
| 1599 |
interconnect-names = "qup-core", "qup-config", "qup-memory"; |
| 1600 |
dmas = <&gpi_dma0 0 6 QCOM_GPI_SPI>, |
| 1601 |
<&gpi_dma0 1 6 QCOM_GPI_SPI>; |
| 1602 |
dma-names = "tx", "rx"; |
| 1603 |
#address-cells = <1>; |
| 1604 |
#size-cells = <0>; |
| 1605 |
status = "disabled"; |
| 1606 |
}; |
| 1607 |
|
| 1608 |
uart7: serial@99c000 { |
| 1609 |
compatible = "qcom,geni-debug-uart"; |
| 1610 |
reg = <0 0x0099c000 0 0x4000>; |
| 1611 |
clock-names = "se"; |
| 1612 |
clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>; |
| 1613 |
pinctrl-names = "default"; |
| 1614 |
pinctrl-0 = <&qup_uart7_tx>, <&qup_uart7_rx>; |
| 1615 |
interrupts = <GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>; |
| 1616 |
interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS |
| 1617 |
&clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>, |
| 1618 |
<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS |
| 1619 |
&config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>; |
| 1620 |
interconnect-names = "qup-core", |
| 1621 |
"qup-config"; |
| 1622 |
status = "disabled"; |
| 1623 |
}; |
| 1624 |
}; |
| 1625 |
|
| 1626 |
gpi_dma1: dma-controller@a00000 { |
| 1627 |
compatible = "qcom,sm8450-gpi-dma", "qcom,sm6350-gpi-dma"; |
| 1628 |
#dma-cells = <3>; |
| 1629 |
reg = <0 0x00a00000 0 0x60000>; |
| 1630 |
interrupts = <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH>, |
| 1631 |
<GIC_SPI 280 IRQ_TYPE_LEVEL_HIGH>, |
| 1632 |
<GIC_SPI 281 IRQ_TYPE_LEVEL_HIGH>, |
| 1633 |
<GIC_SPI 282 IRQ_TYPE_LEVEL_HIGH>, |
| 1634 |
<GIC_SPI 283 IRQ_TYPE_LEVEL_HIGH>, |
| 1635 |
<GIC_SPI 284 IRQ_TYPE_LEVEL_HIGH>, |
| 1636 |
<GIC_SPI 293 IRQ_TYPE_LEVEL_HIGH>, |
| 1637 |
<GIC_SPI 294 IRQ_TYPE_LEVEL_HIGH>, |
| 1638 |
<GIC_SPI 295 IRQ_TYPE_LEVEL_HIGH>, |
| 1639 |
<GIC_SPI 296 IRQ_TYPE_LEVEL_HIGH>, |
| 1640 |
<GIC_SPI 297 IRQ_TYPE_LEVEL_HIGH>, |
| 1641 |
<GIC_SPI 298 IRQ_TYPE_LEVEL_HIGH>; |
| 1642 |
dma-channels = <12>; |
| 1643 |
dma-channel-mask = <0x7e>; |
| 1644 |
iommus = <&apps_smmu 0x56 0x0>; |
| 1645 |
status = "disabled"; |
| 1646 |
}; |
| 1647 |
|
| 1648 |
qupv3_id_1: geniqup@ac0000 { |
| 1649 |
compatible = "qcom,geni-se-qup"; |
| 1650 |
reg = <0x0 0x00ac0000 0x0 0x6000>; |
| 1651 |
clock-names = "m-ahb", "s-ahb"; |
| 1652 |
clocks = <&gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>, |
| 1653 |
<&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>; |
| 1654 |
iommus = <&apps_smmu 0x43 0x0>; |
| 1655 |
interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>; |
| 1656 |
interconnect-names = "qup-core"; |
| 1657 |
#address-cells = <2>; |
| 1658 |
#size-cells = <2>; |
| 1659 |
ranges; |
| 1660 |
status = "disabled"; |
| 1661 |
|
| 1662 |
i2c8: i2c@a80000 { |
| 1663 |
compatible = "qcom,geni-i2c"; |
| 1664 |
reg = <0x0 0x00a80000 0x0 0x4000>; |
| 1665 |
clock-names = "se"; |
| 1666 |
clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>; |
| 1667 |
pinctrl-names = "default"; |
| 1668 |
pinctrl-0 = <&qup_i2c8_data_clk>; |
| 1669 |
interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>; |
| 1670 |
#address-cells = <1>; |
| 1671 |
#size-cells = <0>; |
| 1672 |
interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, |
| 1673 |
<&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>, |
| 1674 |
<&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; |
| 1675 |
interconnect-names = "qup-core", "qup-config", "qup-memory"; |
| 1676 |
dmas = <&gpi_dma1 0 0 QCOM_GPI_I2C>, |
| 1677 |
<&gpi_dma1 1 0 QCOM_GPI_I2C>; |
| 1678 |
dma-names = "tx", "rx"; |
| 1679 |
status = "disabled"; |
| 1680 |
}; |
| 1681 |
|
| 1682 |
spi8: spi@a80000 { |
| 1683 |
compatible = "qcom,geni-spi"; |
| 1684 |
reg = <0x0 0x00a80000 0x0 0x4000>; |
| 1685 |
clock-names = "se"; |
| 1686 |
clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>; |
| 1687 |
interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>; |
| 1688 |
pinctrl-names = "default"; |
| 1689 |
pinctrl-0 = <&qup_spi8_data_clk>, <&qup_spi8_cs>; |
| 1690 |
interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, |
| 1691 |
<&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>, |
| 1692 |
<&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; |
| 1693 |
interconnect-names = "qup-core", "qup-config", "qup-memory"; |
| 1694 |
dmas = <&gpi_dma1 0 0 QCOM_GPI_SPI>, |
| 1695 |
<&gpi_dma1 1 0 QCOM_GPI_SPI>; |
| 1696 |
dma-names = "tx", "rx"; |
| 1697 |
#address-cells = <1>; |
| 1698 |
#size-cells = <0>; |
| 1699 |
status = "disabled"; |
| 1700 |
}; |
| 1701 |
|
| 1702 |
i2c9: i2c@a84000 { |
| 1703 |
compatible = "qcom,geni-i2c"; |
| 1704 |
reg = <0x0 0x00a84000 0x0 0x4000>; |
| 1705 |
clock-names = "se"; |
| 1706 |
clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>; |
| 1707 |
pinctrl-names = "default"; |
| 1708 |
pinctrl-0 = <&qup_i2c9_data_clk>; |
| 1709 |
interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>; |
| 1710 |
#address-cells = <1>; |
| 1711 |
#size-cells = <0>; |
| 1712 |
interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, |
| 1713 |
<&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>, |
| 1714 |
<&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; |
| 1715 |
interconnect-names = "qup-core", "qup-config", "qup-memory"; |
| 1716 |
dmas = <&gpi_dma1 0 1 QCOM_GPI_I2C>, |
| 1717 |
<&gpi_dma1 1 1 QCOM_GPI_I2C>; |
| 1718 |
dma-names = "tx", "rx"; |
| 1719 |
status = "disabled"; |
| 1720 |
}; |
| 1721 |
|
| 1722 |
spi9: spi@a84000 { |
| 1723 |
compatible = "qcom,geni-spi"; |
| 1724 |
reg = <0x0 0x00a84000 0x0 0x4000>; |
| 1725 |
clock-names = "se"; |
| 1726 |
clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>; |
| 1727 |
interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>; |
| 1728 |
pinctrl-names = "default"; |
| 1729 |
pinctrl-0 = <&qup_spi9_data_clk>, <&qup_spi9_cs>; |
| 1730 |
interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, |
| 1731 |
<&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>, |
| 1732 |
<&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; |
| 1733 |
interconnect-names = "qup-core", "qup-config", "qup-memory"; |
| 1734 |
dmas = <&gpi_dma1 0 1 QCOM_GPI_SPI>, |
| 1735 |
<&gpi_dma1 1 1 QCOM_GPI_SPI>; |
| 1736 |
dma-names = "tx", "rx"; |
| 1737 |
#address-cells = <1>; |
| 1738 |
#size-cells = <0>; |
| 1739 |
status = "disabled"; |
| 1740 |
}; |
| 1741 |
|
| 1742 |
i2c10: i2c@a88000 { |
| 1743 |
compatible = "qcom,geni-i2c"; |
| 1744 |
reg = <0x0 0x00a88000 0x0 0x4000>; |
| 1745 |
clock-names = "se"; |
| 1746 |
clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>; |
| 1747 |
pinctrl-names = "default"; |
| 1748 |
pinctrl-0 = <&qup_i2c10_data_clk>; |
| 1749 |
interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>; |
| 1750 |
#address-cells = <1>; |
| 1751 |
#size-cells = <0>; |
| 1752 |
interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, |
| 1753 |
<&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>, |
| 1754 |
<&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; |
| 1755 |
interconnect-names = "qup-core", "qup-config", "qup-memory"; |
| 1756 |
dmas = <&gpi_dma1 0 2 QCOM_GPI_I2C>, |
| 1757 |
<&gpi_dma1 1 2 QCOM_GPI_I2C>; |
| 1758 |
dma-names = "tx", "rx"; |
| 1759 |
status = "disabled"; |
| 1760 |
}; |
| 1761 |
|
| 1762 |
spi10: spi@a88000 { |
| 1763 |
compatible = "qcom,geni-spi"; |
| 1764 |
reg = <0x0 0x00a88000 0x0 0x4000>; |
| 1765 |
clock-names = "se"; |
| 1766 |
clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>; |
| 1767 |
interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>; |
| 1768 |
pinctrl-names = "default"; |
| 1769 |
pinctrl-0 = <&qup_spi10_data_clk>, <&qup_spi10_cs>; |
| 1770 |
interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, |
| 1771 |
<&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>, |
| 1772 |
<&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; |
| 1773 |
interconnect-names = "qup-core", "qup-config", "qup-memory"; |
| 1774 |
dmas = <&gpi_dma1 0 2 QCOM_GPI_SPI>, |
| 1775 |
<&gpi_dma1 1 2 QCOM_GPI_SPI>; |
| 1776 |
dma-names = "tx", "rx"; |
| 1777 |
#address-cells = <1>; |
| 1778 |
#size-cells = <0>; |
| 1779 |
status = "disabled"; |
| 1780 |
}; |
| 1781 |
|
| 1782 |
i2c11: i2c@a8c000 { |
| 1783 |
compatible = "qcom,geni-i2c"; |
| 1784 |
reg = <0x0 0x00a8c000 0x0 0x4000>; |
| 1785 |
clock-names = "se"; |
| 1786 |
clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>; |
| 1787 |
pinctrl-names = "default"; |
| 1788 |
pinctrl-0 = <&qup_i2c11_data_clk>; |
| 1789 |
interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>; |
| 1790 |
#address-cells = <1>; |
| 1791 |
#size-cells = <0>; |
| 1792 |
interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, |
| 1793 |
<&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>, |
| 1794 |
<&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; |
| 1795 |
interconnect-names = "qup-core", "qup-config", "qup-memory"; |
| 1796 |
dmas = <&gpi_dma1 0 3 QCOM_GPI_I2C>, |
| 1797 |
<&gpi_dma1 1 3 QCOM_GPI_I2C>; |
| 1798 |
dma-names = "tx", "rx"; |
| 1799 |
status = "disabled"; |
| 1800 |
}; |
| 1801 |
|
| 1802 |
spi11: spi@a8c000 { |
| 1803 |
compatible = "qcom,geni-spi"; |
| 1804 |
reg = <0x0 0x00a8c000 0x0 0x4000>; |
| 1805 |
clock-names = "se"; |
| 1806 |
clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>; |
| 1807 |
interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>; |
| 1808 |
pinctrl-names = "default"; |
| 1809 |
pinctrl-0 = <&qup_spi11_data_clk>, <&qup_spi11_cs>; |
| 1810 |
interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, |
| 1811 |
<&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>, |
| 1812 |
<&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; |
| 1813 |
interconnect-names = "qup-core", "qup-config", "qup-memory"; |
| 1814 |
dmas = <&gpi_dma1 0 3 QCOM_GPI_SPI>, |
| 1815 |
<&gpi_dma1 1 3 QCOM_GPI_SPI>; |
| 1816 |
dma-names = "tx", "rx"; |
| 1817 |
#address-cells = <1>; |
| 1818 |
#size-cells = <0>; |
| 1819 |
status = "disabled"; |
| 1820 |
}; |
| 1821 |
|
| 1822 |
i2c12: i2c@a90000 { |
| 1823 |
compatible = "qcom,geni-i2c"; |
| 1824 |
reg = <0x0 0x00a90000 0x0 0x4000>; |
| 1825 |
clock-names = "se"; |
| 1826 |
clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>; |
| 1827 |
pinctrl-names = "default"; |
| 1828 |
pinctrl-0 = <&qup_i2c12_data_clk>; |
| 1829 |
interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>; |
| 1830 |
#address-cells = <1>; |
| 1831 |
#size-cells = <0>; |
| 1832 |
interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, |
| 1833 |
<&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>, |
| 1834 |
<&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; |
| 1835 |
interconnect-names = "qup-core", "qup-config", "qup-memory"; |
| 1836 |
dmas = <&gpi_dma1 0 4 QCOM_GPI_I2C>, |
| 1837 |
<&gpi_dma1 1 4 QCOM_GPI_I2C>; |
| 1838 |
dma-names = "tx", "rx"; |
| 1839 |
status = "disabled"; |
| 1840 |
}; |
| 1841 |
|
| 1842 |
spi12: spi@a90000 { |
| 1843 |
compatible = "qcom,geni-spi"; |
| 1844 |
reg = <0x0 0x00a90000 0x0 0x4000>; |
| 1845 |
clock-names = "se"; |
| 1846 |
clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>; |
| 1847 |
interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>; |
| 1848 |
pinctrl-names = "default"; |
| 1849 |
pinctrl-0 = <&qup_spi12_data_clk>, <&qup_spi12_cs>; |
| 1850 |
interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, |
| 1851 |
<&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>, |
| 1852 |
<&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; |
| 1853 |
interconnect-names = "qup-core", "qup-config", "qup-memory"; |
| 1854 |
dmas = <&gpi_dma1 0 4 QCOM_GPI_SPI>, |
| 1855 |
<&gpi_dma1 1 4 QCOM_GPI_SPI>; |
| 1856 |
dma-names = "tx", "rx"; |
| 1857 |
#address-cells = <1>; |
| 1858 |
#size-cells = <0>; |
| 1859 |
status = "disabled"; |
| 1860 |
}; |
| 1861 |
|
| 1862 |
i2c13: i2c@a94000 { |
| 1863 |
compatible = "qcom,geni-i2c"; |
| 1864 |
reg = <0 0x00a94000 0 0x4000>; |
| 1865 |
clock-names = "se"; |
| 1866 |
clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>; |
| 1867 |
pinctrl-names = "default"; |
| 1868 |
pinctrl-0 = <&qup_i2c13_data_clk>; |
| 1869 |
interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>; |
| 1870 |
interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, |
| 1871 |
<&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>, |
| 1872 |
<&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; |
| 1873 |
interconnect-names = "qup-core", "qup-config", "qup-memory"; |
| 1874 |
dmas = <&gpi_dma1 0 5 QCOM_GPI_I2C>, |
| 1875 |
<&gpi_dma1 1 5 QCOM_GPI_I2C>; |
| 1876 |
dma-names = "tx", "rx"; |
| 1877 |
#address-cells = <1>; |
| 1878 |
#size-cells = <0>; |
| 1879 |
status = "disabled"; |
| 1880 |
}; |
| 1881 |
|
| 1882 |
spi13: spi@a94000 { |
| 1883 |
compatible = "qcom,geni-spi"; |
| 1884 |
reg = <0x0 0x00a94000 0x0 0x4000>; |
| 1885 |
clock-names = "se"; |
| 1886 |
clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>; |
| 1887 |
interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>; |
| 1888 |
pinctrl-names = "default"; |
| 1889 |
pinctrl-0 = <&qup_spi13_data_clk>, <&qup_spi13_cs>; |
| 1890 |
interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, |
| 1891 |
<&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>, |
| 1892 |
<&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; |
| 1893 |
interconnect-names = "qup-core", "qup-config", "qup-memory"; |
| 1894 |
dmas = <&gpi_dma1 0 5 QCOM_GPI_SPI>, |
| 1895 |
<&gpi_dma1 1 5 QCOM_GPI_SPI>; |
| 1896 |
dma-names = "tx", "rx"; |
| 1897 |
#address-cells = <1>; |
| 1898 |
#size-cells = <0>; |
| 1899 |
status = "disabled"; |
| 1900 |
}; |
| 1901 |
|
| 1902 |
i2c14: i2c@a98000 { |
| 1903 |
compatible = "qcom,geni-i2c"; |
| 1904 |
reg = <0 0x00a98000 0 0x4000>; |
| 1905 |
clock-names = "se"; |
| 1906 |
clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>; |
| 1907 |
pinctrl-names = "default"; |
| 1908 |
pinctrl-0 = <&qup_i2c14_data_clk>; |
| 1909 |
interrupts = <GIC_SPI 363 IRQ_TYPE_LEVEL_HIGH>; |
| 1910 |
interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, |
| 1911 |
<&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>, |
| 1912 |
<&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; |
| 1913 |
interconnect-names = "qup-core", "qup-config", "qup-memory"; |
| 1914 |
dmas = <&gpi_dma1 0 6 QCOM_GPI_I2C>, |
| 1915 |
<&gpi_dma1 1 6 QCOM_GPI_I2C>; |
| 1916 |
dma-names = "tx", "rx"; |
| 1917 |
#address-cells = <1>; |
| 1918 |
#size-cells = <0>; |
| 1919 |
status = "disabled"; |
| 1920 |
}; |
| 1921 |
|
| 1922 |
spi14: spi@a98000 { |
| 1923 |
compatible = "qcom,geni-spi"; |
| 1924 |
reg = <0x0 0x00a98000 0x0 0x4000>; |
| 1925 |
clock-names = "se"; |
| 1926 |
clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>; |
| 1927 |
interrupts = <GIC_SPI 363 IRQ_TYPE_LEVEL_HIGH>; |
| 1928 |
pinctrl-names = "default"; |
| 1929 |
pinctrl-0 = <&qup_spi14_data_clk>, <&qup_spi14_cs>; |
| 1930 |
interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, |
| 1931 |
<&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>, |
| 1932 |
<&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; |
| 1933 |
interconnect-names = "qup-core", "qup-config", "qup-memory"; |
| 1934 |
dmas = <&gpi_dma1 0 6 QCOM_GPI_SPI>, |
| 1935 |
<&gpi_dma1 1 6 QCOM_GPI_SPI>; |
| 1936 |
dma-names = "tx", "rx"; |
| 1937 |
#address-cells = <1>; |
| 1938 |
#size-cells = <0>; |
| 1939 |
status = "disabled"; |
| 1940 |
}; |
| 1941 |
}; |
| 1942 |
|
| 1943 |
rng: rng@10c3000 { |
| 1944 |
compatible = "qcom,sm8450-trng", "qcom,trng"; |
| 1945 |
reg = <0 0x010c3000 0 0x1000>; |
| 1946 |
}; |
| 1947 |
|
| 1948 |
pcie0: pcie@1c00000 { |
| 1949 |
compatible = "qcom,pcie-sm8450-pcie0"; |
| 1950 |
reg = <0 0x01c00000 0 0x3000>, |
| 1951 |
<0 0x60000000 0 0xf1d>, |
| 1952 |
<0 0x60000f20 0 0xa8>, |
| 1953 |
<0 0x60001000 0 0x1000>, |
| 1954 |
<0 0x60100000 0 0x100000>; |
| 1955 |
reg-names = "parf", "dbi", "elbi", "atu", "config"; |
| 1956 |
device_type = "pci"; |
| 1957 |
linux,pci-domain = <0>; |
| 1958 |
bus-range = <0x00 0xff>; |
| 1959 |
num-lanes = <1>; |
| 1960 |
|
| 1961 |
#address-cells = <3>; |
| 1962 |
#size-cells = <2>; |
| 1963 |
|
| 1964 |
ranges = <0x01000000 0x0 0x00000000 0x0 0x60200000 0x0 0x100000>, |
| 1965 |
<0x02000000 0x0 0x60300000 0x0 0x60300000 0x0 0x3d00000>; |
| 1966 |
|
| 1967 |
msi-map = <0x0 &gic_its 0x5980 0x1>, |
| 1968 |
<0x100 &gic_its 0x5981 0x1>; |
| 1969 |
msi-map-mask = <0xff00>; |
| 1970 |
interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>, |
| 1971 |
<GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>, |
| 1972 |
<GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>, |
| 1973 |
<GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>, |
| 1974 |
<GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>, |
| 1975 |
<GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>, |
| 1976 |
<GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>, |
| 1977 |
<GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>, |
| 1978 |
<GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>; |
| 1979 |
interrupt-names = "msi0", |
| 1980 |
"msi1", |
| 1981 |
"msi2", |
| 1982 |
"msi3", |
| 1983 |
"msi4", |
| 1984 |
"msi5", |
| 1985 |
"msi6", |
| 1986 |
"msi7", |
| 1987 |
"global"; |
| 1988 |
#interrupt-cells = <1>; |
| 1989 |
interrupt-map-mask = <0 0 0 0x7>; |
| 1990 |
interrupt-map = <0 0 0 1 &intc 0 0 GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ |
| 1991 |
<0 0 0 2 &intc 0 0 GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>, /* int_b */ |
| 1992 |
<0 0 0 3 &intc 0 0 GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>, /* int_c */ |
| 1993 |
<0 0 0 4 &intc 0 0 GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>; /* int_d */ |
| 1994 |
|
| 1995 |
interconnects = <&pcie_noc MASTER_PCIE_0 QCOM_ICC_TAG_ALWAYS |
| 1996 |
&mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>, |
| 1997 |
<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS |
| 1998 |
&config_noc SLAVE_PCIE_0 QCOM_ICC_TAG_ALWAYS>; |
| 1999 |
interconnect-names = "pcie-mem", "cpu-pcie"; |
| 2000 |
|
| 2001 |
clocks = <&gcc GCC_PCIE_0_PIPE_CLK>, |
| 2002 |
<&gcc GCC_PCIE_0_PIPE_CLK_SRC>, |
| 2003 |
<&pcie0_phy>, |
| 2004 |
<&rpmhcc RPMH_CXO_CLK>, |
| 2005 |
<&gcc GCC_PCIE_0_AUX_CLK>, |
| 2006 |
<&gcc GCC_PCIE_0_CFG_AHB_CLK>, |
| 2007 |
<&gcc GCC_PCIE_0_MSTR_AXI_CLK>, |
| 2008 |
<&gcc GCC_PCIE_0_SLV_AXI_CLK>, |
| 2009 |
<&gcc GCC_PCIE_0_SLV_Q2A_AXI_CLK>, |
| 2010 |
<&gcc GCC_DDRSS_PCIE_SF_TBU_CLK>, |
| 2011 |
<&gcc GCC_AGGRE_NOC_PCIE_0_AXI_CLK>, |
| 2012 |
<&gcc GCC_AGGRE_NOC_PCIE_1_AXI_CLK>; |
| 2013 |
clock-names = "pipe", |
| 2014 |
"pipe_mux", |
| 2015 |
"phy_pipe", |
| 2016 |
"ref", |
| 2017 |
"aux", |
| 2018 |
"cfg", |
| 2019 |
"bus_master", |
| 2020 |
"bus_slave", |
| 2021 |
"slave_q2a", |
| 2022 |
"ddrss_sf_tbu", |
| 2023 |
"aggre0", |
| 2024 |
"aggre1"; |
| 2025 |
|
| 2026 |
iommu-map = <0x0 &apps_smmu 0x1c00 0x1>, |
| 2027 |
<0x100 &apps_smmu 0x1c01 0x1>; |
| 2028 |
|
| 2029 |
resets = <&gcc GCC_PCIE_0_BCR>; |
| 2030 |
reset-names = "pci"; |
| 2031 |
|
| 2032 |
power-domains = <&gcc PCIE_0_GDSC>; |
| 2033 |
|
| 2034 |
phys = <&pcie0_phy>; |
| 2035 |
phy-names = "pciephy"; |
| 2036 |
|
| 2037 |
perst-gpios = <&tlmm 94 GPIO_ACTIVE_LOW>; |
| 2038 |
wake-gpios = <&tlmm 96 GPIO_ACTIVE_HIGH>; |
| 2039 |
|
| 2040 |
pinctrl-names = "default"; |
| 2041 |
pinctrl-0 = <&pcie0_default_state>; |
| 2042 |
|
| 2043 |
operating-points-v2 = <&pcie0_opp_table>; |
| 2044 |
|
| 2045 |
status = "disabled"; |
| 2046 |
|
| 2047 |
pcie0_opp_table: opp-table { |
| 2048 |
compatible = "operating-points-v2"; |
| 2049 |
|
| 2050 |
/* 2.5 GT/s x1 */ |
| 2051 |
opp-2500000 { |
| 2052 |
opp-hz = /bits/ 64 <2500000>; |
| 2053 |
required-opps = <&rpmhpd_opp_low_svs>; |
| 2054 |
opp-peak-kBps = <250000 1>; |
| 2055 |
opp-level = <1>; |
| 2056 |
}; |
| 2057 |
|
| 2058 |
/* 5 GT/s x1 */ |
| 2059 |
opp-5000000 { |
| 2060 |
opp-hz = /bits/ 64 <5000000>; |
| 2061 |
required-opps = <&rpmhpd_opp_low_svs>; |
| 2062 |
opp-peak-kBps = <500000 1>; |
| 2063 |
opp-level = <2>; |
| 2064 |
}; |
| 2065 |
|
| 2066 |
/* 8 GT/s x1 */ |
| 2067 |
opp-8000000 { |
| 2068 |
opp-hz = /bits/ 64 <8000000>; |
| 2069 |
required-opps = <&rpmhpd_opp_nom>; |
| 2070 |
opp-peak-kBps = <984500 1>; |
| 2071 |
opp-level = <3>; |
| 2072 |
}; |
| 2073 |
}; |
| 2074 |
|
| 2075 |
pcieport0: pcie@0 { |
| 2076 |
device_type = "pci"; |
| 2077 |
reg = <0x0 0x0 0x0 0x0 0x0>; |
| 2078 |
bus-range = <0x01 0xff>; |
| 2079 |
|
| 2080 |
#address-cells = <3>; |
| 2081 |
#size-cells = <2>; |
| 2082 |
ranges; |
| 2083 |
}; |
| 2084 |
}; |
| 2085 |
|
| 2086 |
pcie0_phy: phy@1c06000 { |
| 2087 |
compatible = "qcom,sm8450-qmp-gen3x1-pcie-phy"; |
| 2088 |
reg = <0 0x01c06000 0 0x2000>; |
| 2089 |
|
| 2090 |
clocks = <&gcc GCC_PCIE_0_AUX_CLK>, |
| 2091 |
<&gcc GCC_PCIE_0_CFG_AHB_CLK>, |
| 2092 |
<&gcc GCC_PCIE_0_CLKREF_EN>, |
| 2093 |
<&gcc GCC_PCIE_0_PHY_RCHNG_CLK>, |
| 2094 |
<&gcc GCC_PCIE_0_PIPE_CLK>; |
| 2095 |
clock-names = "aux", |
| 2096 |
"cfg_ahb", |
| 2097 |
"ref", |
| 2098 |
"rchng", |
| 2099 |
"pipe"; |
| 2100 |
|
| 2101 |
clock-output-names = "pcie_0_pipe_clk"; |
| 2102 |
#clock-cells = <0>; |
| 2103 |
|
| 2104 |
#phy-cells = <0>; |
| 2105 |
|
| 2106 |
resets = <&gcc GCC_PCIE_0_PHY_BCR>; |
| 2107 |
reset-names = "phy"; |
| 2108 |
|
| 2109 |
assigned-clocks = <&gcc GCC_PCIE_0_PHY_RCHNG_CLK>; |
| 2110 |
assigned-clock-rates = <100000000>; |
| 2111 |
|
| 2112 |
status = "disabled"; |
| 2113 |
}; |
| 2114 |
|
| 2115 |
pcie1: pcie@1c08000 { |
| 2116 |
compatible = "qcom,pcie-sm8450-pcie1"; |
| 2117 |
reg = <0 0x01c08000 0 0x3000>, |
| 2118 |
<0 0x40000000 0 0xf1d>, |
| 2119 |
<0 0x40000f20 0 0xa8>, |
| 2120 |
<0 0x40001000 0 0x1000>, |
| 2121 |
<0 0x40100000 0 0x100000>; |
| 2122 |
reg-names = "parf", "dbi", "elbi", "atu", "config"; |
| 2123 |
device_type = "pci"; |
| 2124 |
linux,pci-domain = <1>; |
| 2125 |
bus-range = <0x00 0xff>; |
| 2126 |
num-lanes = <2>; |
| 2127 |
|
| 2128 |
#address-cells = <3>; |
| 2129 |
#size-cells = <2>; |
| 2130 |
|
| 2131 |
ranges = <0x01000000 0x0 0x00000000 0x0 0x40200000 0x0 0x100000>, |
| 2132 |
<0x02000000 0x0 0x40300000 0x0 0x40300000 0x0 0x1fd00000>; |
| 2133 |
|
| 2134 |
msi-map = <0x0 &gic_its 0x5a00 0x1>, |
| 2135 |
<0x100 &gic_its 0x5a01 0x1>; |
| 2136 |
msi-map-mask = <0xff00>; |
| 2137 |
interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>, |
| 2138 |
<GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>, |
| 2139 |
<GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>, |
| 2140 |
<GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>, |
| 2141 |
<GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>, |
| 2142 |
<GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>, |
| 2143 |
<GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>, |
| 2144 |
<GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>, |
| 2145 |
<GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>; |
| 2146 |
interrupt-names = "msi0", |
| 2147 |
"msi1", |
| 2148 |
"msi2", |
| 2149 |
"msi3", |
| 2150 |
"msi4", |
| 2151 |
"msi5", |
| 2152 |
"msi6", |
| 2153 |
"msi7", |
| 2154 |
"global"; |
| 2155 |
#interrupt-cells = <1>; |
| 2156 |
interrupt-map-mask = <0 0 0 0x7>; |
| 2157 |
interrupt-map = <0 0 0 1 &intc 0 0 GIC_SPI 434 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ |
| 2158 |
<0 0 0 2 &intc 0 0 GIC_SPI 435 IRQ_TYPE_LEVEL_HIGH>, /* int_b */ |
| 2159 |
<0 0 0 3 &intc 0 0 GIC_SPI 438 IRQ_TYPE_LEVEL_HIGH>, /* int_c */ |
| 2160 |
<0 0 0 4 &intc 0 0 GIC_SPI 439 IRQ_TYPE_LEVEL_HIGH>; /* int_d */ |
| 2161 |
|
| 2162 |
interconnects = <&pcie_noc MASTER_PCIE_1 QCOM_ICC_TAG_ALWAYS |
| 2163 |
&mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>, |
| 2164 |
<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS |
| 2165 |
&config_noc SLAVE_PCIE_1 QCOM_ICC_TAG_ALWAYS>; |
| 2166 |
interconnect-names = "pcie-mem", "cpu-pcie"; |
| 2167 |
|
| 2168 |
clocks = <&gcc GCC_PCIE_1_PIPE_CLK>, |
| 2169 |
<&gcc GCC_PCIE_1_PIPE_CLK_SRC>, |
| 2170 |
<&pcie1_phy QMP_PCIE_PIPE_CLK>, |
| 2171 |
<&rpmhcc RPMH_CXO_CLK>, |
| 2172 |
<&gcc GCC_PCIE_1_AUX_CLK>, |
| 2173 |
<&gcc GCC_PCIE_1_CFG_AHB_CLK>, |
| 2174 |
<&gcc GCC_PCIE_1_MSTR_AXI_CLK>, |
| 2175 |
<&gcc GCC_PCIE_1_SLV_AXI_CLK>, |
| 2176 |
<&gcc GCC_PCIE_1_SLV_Q2A_AXI_CLK>, |
| 2177 |
<&gcc GCC_DDRSS_PCIE_SF_TBU_CLK>, |
| 2178 |
<&gcc GCC_AGGRE_NOC_PCIE_1_AXI_CLK>; |
| 2179 |
clock-names = "pipe", |
| 2180 |
"pipe_mux", |
| 2181 |
"phy_pipe", |
| 2182 |
"ref", |
| 2183 |
"aux", |
| 2184 |
"cfg", |
| 2185 |
"bus_master", |
| 2186 |
"bus_slave", |
| 2187 |
"slave_q2a", |
| 2188 |
"ddrss_sf_tbu", |
| 2189 |
"aggre1"; |
| 2190 |
|
| 2191 |
iommu-map = <0x0 &apps_smmu 0x1c80 0x1>, |
| 2192 |
<0x100 &apps_smmu 0x1c81 0x1>; |
| 2193 |
|
| 2194 |
resets = <&gcc GCC_PCIE_1_BCR>; |
| 2195 |
reset-names = "pci"; |
| 2196 |
|
| 2197 |
power-domains = <&gcc PCIE_1_GDSC>; |
| 2198 |
|
| 2199 |
phys = <&pcie1_phy>; |
| 2200 |
phy-names = "pciephy"; |
| 2201 |
|
| 2202 |
perst-gpios = <&tlmm 97 GPIO_ACTIVE_LOW>; |
| 2203 |
wake-gpios = <&tlmm 99 GPIO_ACTIVE_HIGH>; |
| 2204 |
|
| 2205 |
pinctrl-names = "default"; |
| 2206 |
pinctrl-0 = <&pcie1_default_state>; |
| 2207 |
|
| 2208 |
operating-points-v2 = <&pcie1_opp_table>; |
| 2209 |
|
| 2210 |
status = "disabled"; |
| 2211 |
|
| 2212 |
pcie1_opp_table: opp-table { |
| 2213 |
compatible = "operating-points-v2"; |
| 2214 |
|
| 2215 |
/* 2.5 GT/s x1 */ |
| 2216 |
opp-2500000-1 { |
| 2217 |
opp-hz = /bits/ 64 <2500000>; |
| 2218 |
required-opps = <&rpmhpd_opp_low_svs>; |
| 2219 |
opp-peak-kBps = <250000 1>; |
| 2220 |
opp-level = <1>; |
| 2221 |
}; |
| 2222 |
|
| 2223 |
/* 2.5 GT/s x2 */ |
| 2224 |
opp-5000000-1 { |
| 2225 |
opp-hz = /bits/ 64 <5000000>; |
| 2226 |
required-opps = <&rpmhpd_opp_low_svs>; |
| 2227 |
opp-peak-kBps = <500000 1>; |
| 2228 |
opp-level = <1>; |
| 2229 |
}; |
| 2230 |
|
| 2231 |
/* 5 GT/s x1 */ |
| 2232 |
opp-5000000-2 { |
| 2233 |
opp-hz = /bits/ 64 <5000000>; |
| 2234 |
required-opps = <&rpmhpd_opp_low_svs>; |
| 2235 |
opp-peak-kBps = <500000 1>; |
| 2236 |
opp-level = <2>; |
| 2237 |
}; |
| 2238 |
|
| 2239 |
/* 5 GT/s x2 */ |
| 2240 |
opp-10000000-2 { |
| 2241 |
opp-hz = /bits/ 64 <10000000>; |
| 2242 |
required-opps = <&rpmhpd_opp_low_svs>; |
| 2243 |
opp-peak-kBps = <1000000 1>; |
| 2244 |
opp-level = <2>; |
| 2245 |
}; |
| 2246 |
|
| 2247 |
/* 8 GT/s x1 */ |
| 2248 |
opp-8000000-3 { |
| 2249 |
opp-hz = /bits/ 64 <8000000>; |
| 2250 |
required-opps = <&rpmhpd_opp_nom>; |
| 2251 |
opp-peak-kBps = <984500 1>; |
| 2252 |
opp-level = <3>; |
| 2253 |
}; |
| 2254 |
|
| 2255 |
/* 8 GT/s x2 */ |
| 2256 |
opp-16000000-3 { |
| 2257 |
opp-hz = /bits/ 64 <16000000>; |
| 2258 |
required-opps = <&rpmhpd_opp_nom>; |
| 2259 |
opp-peak-kBps = <1969000 1>; |
| 2260 |
opp-level = <3>; |
| 2261 |
}; |
| 2262 |
|
| 2263 |
/* 16 GT/s x1 */ |
| 2264 |
opp-16000000-4 { |
| 2265 |
opp-hz = /bits/ 64 <16000000>; |
| 2266 |
required-opps = <&rpmhpd_opp_nom>; |
| 2267 |
opp-peak-kBps = <1969000 1>; |
| 2268 |
opp-level = <4>; |
| 2269 |
}; |
| 2270 |
|
| 2271 |
/* 16 GT/s x2 */ |
| 2272 |
opp-32000000-4 { |
| 2273 |
opp-hz = /bits/ 64 <32000000>; |
| 2274 |
required-opps = <&rpmhpd_opp_nom>; |
| 2275 |
opp-peak-kBps = <3938000 1>; |
| 2276 |
opp-level = <4>; |
| 2277 |
}; |
| 2278 |
}; |
| 2279 |
|
| 2280 |
pcie@0 { |
| 2281 |
device_type = "pci"; |
| 2282 |
reg = <0x0 0x0 0x0 0x0 0x0>; |
| 2283 |
bus-range = <0x01 0xff>; |
| 2284 |
|
| 2285 |
#address-cells = <3>; |
| 2286 |
#size-cells = <2>; |
| 2287 |
ranges; |
| 2288 |
}; |
| 2289 |
}; |
| 2290 |
|
| 2291 |
pcie1_ep: pcie-ep@1c08000 { |
| 2292 |
compatible = "qcom,sm8450-pcie-ep"; |
| 2293 |
reg = <0x0 0x01c08000 0x0 0x3000>, |
| 2294 |
<0x0 0x40000000 0x0 0xf1d>, |
| 2295 |
<0x0 0x40000f20 0x0 0xa8>, |
| 2296 |
<0x0 0x40001000 0x0 0x1000>, |
| 2297 |
<0x0 0x40200000 0x0 0x1000000>, |
| 2298 |
<0x0 0x01c0b000 0x0 0x1000>, |
| 2299 |
<0x0 0x40002000 0x0 0x1000>; |
| 2300 |
reg-names = "parf", |
| 2301 |
"dbi", |
| 2302 |
"elbi", |
| 2303 |
"atu", |
| 2304 |
"addr_space", |
| 2305 |
"mmio", |
| 2306 |
"dma"; |
| 2307 |
|
| 2308 |
clocks = <&gcc GCC_PCIE_1_AUX_CLK>, |
| 2309 |
<&gcc GCC_PCIE_1_CFG_AHB_CLK>, |
| 2310 |
<&gcc GCC_PCIE_1_MSTR_AXI_CLK>, |
| 2311 |
<&gcc GCC_PCIE_1_SLV_AXI_CLK>, |
| 2312 |
<&gcc GCC_PCIE_1_SLV_Q2A_AXI_CLK>, |
| 2313 |
<&rpmhcc RPMH_CXO_CLK>, |
| 2314 |
<&gcc GCC_DDRSS_PCIE_SF_TBU_CLK>, |
| 2315 |
<&gcc GCC_AGGRE_NOC_PCIE_1_AXI_CLK>; |
| 2316 |
clock-names = "aux", |
| 2317 |
"cfg", |
| 2318 |
"bus_master", |
| 2319 |
"bus_slave", |
| 2320 |
"slave_q2a", |
| 2321 |
"ref", |
| 2322 |
"ddrss_sf_tbu", |
| 2323 |
"aggre_noc_axi"; |
| 2324 |
|
| 2325 |
interrupts = <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>, |
| 2326 |
<GIC_SPI 440 IRQ_TYPE_LEVEL_HIGH>, |
| 2327 |
<GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; |
| 2328 |
interrupt-names = "global", |
| 2329 |
"doorbell", |
| 2330 |
"dma"; |
| 2331 |
|
| 2332 |
interconnects = <&pcie_noc MASTER_PCIE_1 QCOM_ICC_TAG_ALWAYS |
| 2333 |
&mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>, |
| 2334 |
<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY |
| 2335 |
&config_noc SLAVE_PCIE_1 QCOM_ICC_TAG_ACTIVE_ONLY>; |
| 2336 |
interconnect-names = "pcie-mem", |
| 2337 |
"cpu-pcie"; |
| 2338 |
|
| 2339 |
iommus = <&apps_smmu 0x1c80 0x7f>; |
| 2340 |
resets = <&gcc GCC_PCIE_1_BCR>; |
| 2341 |
reset-names = "core"; |
| 2342 |
power-domains = <&gcc PCIE_1_GDSC>; |
| 2343 |
phys = <&pcie1_phy>; |
| 2344 |
phy-names = "pciephy"; |
| 2345 |
num-lanes = <2>; |
| 2346 |
|
| 2347 |
pinctrl-names = "default"; |
| 2348 |
pinctrl-0 = <&pcie1_default_state>; |
| 2349 |
|
| 2350 |
status = "disabled"; |
| 2351 |
}; |
| 2352 |
|
| 2353 |
pcie1_phy: phy@1c0e000 { |
| 2354 |
compatible = "qcom,sm8450-qmp-gen4x2-pcie-phy"; |
| 2355 |
reg = <0 0x01c0e000 0 0x2000>; |
| 2356 |
|
| 2357 |
clocks = <&gcc GCC_PCIE_1_PHY_AUX_CLK>, |
| 2358 |
<&gcc GCC_PCIE_1_CFG_AHB_CLK>, |
| 2359 |
<&gcc GCC_PCIE_1_CLKREF_EN>, |
| 2360 |
<&gcc GCC_PCIE_1_PHY_RCHNG_CLK>, |
| 2361 |
<&gcc GCC_PCIE_1_PIPE_CLK>; |
| 2362 |
clock-names = "aux", |
| 2363 |
"cfg_ahb", |
| 2364 |
"ref", |
| 2365 |
"rchng", |
| 2366 |
"pipe"; |
| 2367 |
|
| 2368 |
clock-output-names = "pcie_1_pipe_clk"; |
| 2369 |
#clock-cells = <1>; |
| 2370 |
|
| 2371 |
#phy-cells = <0>; |
| 2372 |
|
| 2373 |
resets = <&gcc GCC_PCIE_1_PHY_BCR>; |
| 2374 |
reset-names = "phy"; |
| 2375 |
|
| 2376 |
assigned-clocks = <&gcc GCC_PCIE_1_PHY_RCHNG_CLK>; |
| 2377 |
assigned-clock-rates = <100000000>; |
| 2378 |
|
| 2379 |
status = "disabled"; |
| 2380 |
}; |
| 2381 |
|
| 2382 |
config_noc: interconnect@1500000 { |
| 2383 |
compatible = "qcom,sm8450-config-noc"; |
| 2384 |
reg = <0 0x01500000 0 0x1c000>; |
| 2385 |
#interconnect-cells = <2>; |
| 2386 |
qcom,bcm-voters = <&apps_bcm_voter>; |
| 2387 |
}; |
| 2388 |
|
| 2389 |
system_noc: interconnect@1680000 { |
| 2390 |
compatible = "qcom,sm8450-system-noc"; |
| 2391 |
reg = <0 0x01680000 0 0x1e200>; |
| 2392 |
#interconnect-cells = <2>; |
| 2393 |
qcom,bcm-voters = <&apps_bcm_voter>; |
| 2394 |
}; |
| 2395 |
|
| 2396 |
pcie_noc: interconnect@16c0000 { |
| 2397 |
compatible = "qcom,sm8450-pcie-anoc"; |
| 2398 |
reg = <0 0x016c0000 0 0xe280>; |
| 2399 |
#interconnect-cells = <2>; |
| 2400 |
qcom,bcm-voters = <&apps_bcm_voter>; |
| 2401 |
}; |
| 2402 |
|
| 2403 |
aggre1_noc: interconnect@16e0000 { |
| 2404 |
compatible = "qcom,sm8450-aggre1-noc"; |
| 2405 |
reg = <0 0x016e0000 0 0x1c080>; |
| 2406 |
#interconnect-cells = <2>; |
| 2407 |
clocks = <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>, |
| 2408 |
<&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>; |
| 2409 |
qcom,bcm-voters = <&apps_bcm_voter>; |
| 2410 |
}; |
| 2411 |
|
| 2412 |
aggre2_noc: interconnect@1700000 { |
| 2413 |
compatible = "qcom,sm8450-aggre2-noc"; |
| 2414 |
reg = <0 0x01700000 0 0x31080>; |
| 2415 |
#interconnect-cells = <2>; |
| 2416 |
qcom,bcm-voters = <&apps_bcm_voter>; |
| 2417 |
clocks = <&gcc GCC_AGGRE_NOC_PCIE_0_AXI_CLK>, |
| 2418 |
<&gcc GCC_AGGRE_NOC_PCIE_1_AXI_CLK>, |
| 2419 |
<&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>, |
| 2420 |
<&rpmhcc RPMH_IPA_CLK>; |
| 2421 |
}; |
| 2422 |
|
| 2423 |
mmss_noc: interconnect@1740000 { |
| 2424 |
compatible = "qcom,sm8450-mmss-noc"; |
| 2425 |
reg = <0 0x01740000 0 0x1f080>; |
| 2426 |
#interconnect-cells = <2>; |
| 2427 |
qcom,bcm-voters = <&apps_bcm_voter>; |
| 2428 |
}; |
| 2429 |
|
| 2430 |
tcsr_mutex: hwlock@1f40000 { |
| 2431 |
compatible = "qcom,tcsr-mutex"; |
| 2432 |
reg = <0x0 0x01f40000 0x0 0x40000>; |
| 2433 |
#hwlock-cells = <1>; |
| 2434 |
}; |
| 2435 |
|
| 2436 |
tcsr: syscon@1fc0000 { |
| 2437 |
compatible = "qcom,sm8450-tcsr", "syscon"; |
| 2438 |
reg = <0x0 0x1fc0000 0x0 0x30000>; |
| 2439 |
}; |
| 2440 |
|
| 2441 |
gpu: gpu@3d00000 { |
| 2442 |
compatible = "qcom,adreno-730.1", "qcom,adreno"; |
| 2443 |
reg = <0x0 0x03d00000 0x0 0x40000>, |
| 2444 |
<0x0 0x03d9e000 0x0 0x1000>, |
| 2445 |
<0x0 0x03d61000 0x0 0x800>; |
| 2446 |
reg-names = "kgsl_3d0_reg_memory", |
| 2447 |
"cx_mem", |
| 2448 |
"cx_dbgc"; |
| 2449 |
|
| 2450 |
interrupts = <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>; |
| 2451 |
|
| 2452 |
iommus = <&adreno_smmu 0 0x400>, |
| 2453 |
<&adreno_smmu 1 0x400>; |
| 2454 |
|
| 2455 |
operating-points-v2 = <&gpu_opp_table>; |
| 2456 |
|
| 2457 |
qcom,gmu = <&gmu>; |
| 2458 |
#cooling-cells = <2>; |
| 2459 |
|
| 2460 |
status = "disabled"; |
| 2461 |
|
| 2462 |
gpu_zap_shader: zap-shader { |
| 2463 |
memory-region = <&gpu_micro_code_mem>; |
| 2464 |
}; |
| 2465 |
|
| 2466 |
gpu_opp_table: opp-table { |
| 2467 |
compatible = "operating-points-v2"; |
| 2468 |
|
| 2469 |
opp-818000000 { |
| 2470 |
opp-hz = /bits/ 64 <818000000>; |
| 2471 |
opp-level = <RPMH_REGULATOR_LEVEL_TURBO>; |
| 2472 |
}; |
| 2473 |
|
| 2474 |
opp-791000000 { |
| 2475 |
opp-hz = /bits/ 64 <791000000>; |
| 2476 |
opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>; |
| 2477 |
}; |
| 2478 |
|
| 2479 |
opp-734000000 { |
| 2480 |
opp-hz = /bits/ 64 <734000000>; |
| 2481 |
opp-level = <RPMH_REGULATOR_LEVEL_NOM>; |
| 2482 |
}; |
| 2483 |
|
| 2484 |
opp-640000000 { |
| 2485 |
opp-hz = /bits/ 64 <640000000>; |
| 2486 |
opp-level = <RPMH_REGULATOR_LEVEL_SVS_L2>; |
| 2487 |
}; |
| 2488 |
|
| 2489 |
opp-599000000 { |
| 2490 |
opp-hz = /bits/ 64 <599000000>; |
| 2491 |
opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>; |
| 2492 |
}; |
| 2493 |
|
| 2494 |
opp-545000000 { |
| 2495 |
opp-hz = /bits/ 64 <545000000>; |
| 2496 |
opp-level = <RPMH_REGULATOR_LEVEL_SVS_L0>; |
| 2497 |
}; |
| 2498 |
|
| 2499 |
opp-492000000 { |
| 2500 |
opp-hz = /bits/ 64 <492000000>; |
| 2501 |
opp-level = <RPMH_REGULATOR_LEVEL_SVS>; |
| 2502 |
}; |
| 2503 |
|
| 2504 |
opp-421000000 { |
| 2505 |
opp-hz = /bits/ 64 <421000000>; |
| 2506 |
opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_L1>; |
| 2507 |
}; |
| 2508 |
|
| 2509 |
opp-350000000 { |
| 2510 |
opp-hz = /bits/ 64 <350000000>; |
| 2511 |
opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>; |
| 2512 |
}; |
| 2513 |
|
| 2514 |
opp-317000000 { |
| 2515 |
opp-hz = /bits/ 64 <317000000>; |
| 2516 |
opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>; |
| 2517 |
}; |
| 2518 |
|
| 2519 |
opp-285000000 { |
| 2520 |
opp-hz = /bits/ 64 <285000000>; |
| 2521 |
opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_D1>; |
| 2522 |
}; |
| 2523 |
|
| 2524 |
opp-220000000 { |
| 2525 |
opp-hz = /bits/ 64 <220000000>; |
| 2526 |
opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_D1>; |
| 2527 |
}; |
| 2528 |
}; |
| 2529 |
}; |
| 2530 |
|
| 2531 |
gmu: gmu@3d6a000 { |
| 2532 |
compatible = "qcom,adreno-gmu-730.1", "qcom,adreno-gmu"; |
| 2533 |
reg = <0x0 0x03d6a000 0x0 0x35000>, |
| 2534 |
<0x0 0x03d50000 0x0 0x10000>, |
| 2535 |
<0x0 0x0b290000 0x0 0x10000>; |
| 2536 |
reg-names = "gmu", "rscc", "gmu_pdc"; |
| 2537 |
|
| 2538 |
interrupts = <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>, |
| 2539 |
<GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>; |
| 2540 |
interrupt-names = "hfi", "gmu"; |
| 2541 |
|
| 2542 |
clocks = <&gpucc GPU_CC_AHB_CLK>, |
| 2543 |
<&gpucc GPU_CC_CX_GMU_CLK>, |
| 2544 |
<&gpucc GPU_CC_CXO_CLK>, |
| 2545 |
<&gcc GCC_DDRSS_GPU_AXI_CLK>, |
| 2546 |
<&gcc GCC_GPU_MEMNOC_GFX_CLK>, |
| 2547 |
<&gpucc GPU_CC_HUB_CX_INT_CLK>, |
| 2548 |
<&gpucc GPU_CC_DEMET_CLK>; |
| 2549 |
clock-names = "ahb", |
| 2550 |
"gmu", |
| 2551 |
"cxo", |
| 2552 |
"axi", |
| 2553 |
"memnoc", |
| 2554 |
"hub", |
| 2555 |
"demet"; |
| 2556 |
|
| 2557 |
power-domains = <&gpucc GPU_CX_GDSC>, |
| 2558 |
<&gpucc GPU_GX_GDSC>; |
| 2559 |
power-domain-names = "cx", |
| 2560 |
"gx"; |
| 2561 |
|
| 2562 |
iommus = <&adreno_smmu 5 0x400>; |
| 2563 |
|
| 2564 |
qcom,qmp = <&aoss_qmp>; |
| 2565 |
|
| 2566 |
operating-points-v2 = <&gmu_opp_table>; |
| 2567 |
|
| 2568 |
gmu_opp_table: opp-table { |
| 2569 |
compatible = "operating-points-v2"; |
| 2570 |
|
| 2571 |
opp-500000000 { |
| 2572 |
opp-hz = /bits/ 64 <500000000>; |
| 2573 |
opp-level = <RPMH_REGULATOR_LEVEL_SVS>; |
| 2574 |
}; |
| 2575 |
|
| 2576 |
opp-200000000 { |
| 2577 |
opp-hz = /bits/ 64 <200000000>; |
| 2578 |
opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>; |
| 2579 |
}; |
| 2580 |
}; |
| 2581 |
}; |
| 2582 |
|
| 2583 |
gpucc: clock-controller@3d90000 { |
| 2584 |
compatible = "qcom,sm8450-gpucc"; |
| 2585 |
reg = <0x0 0x03d90000 0x0 0xa000>; |
| 2586 |
clocks = <&rpmhcc RPMH_CXO_CLK>, |
| 2587 |
<&gcc GCC_GPU_GPLL0_CLK_SRC>, |
| 2588 |
<&gcc GCC_GPU_GPLL0_DIV_CLK_SRC>; |
| 2589 |
#clock-cells = <1>; |
| 2590 |
#reset-cells = <1>; |
| 2591 |
#power-domain-cells = <1>; |
| 2592 |
}; |
| 2593 |
|
| 2594 |
adreno_smmu: iommu@3da0000 { |
| 2595 |
compatible = "qcom,sm8450-smmu-500", "qcom,adreno-smmu", |
| 2596 |
"qcom,smmu-500", "arm,mmu-500"; |
| 2597 |
reg = <0x0 0x03da0000 0x0 0x40000>; |
| 2598 |
#iommu-cells = <2>; |
| 2599 |
#global-interrupts = <1>; |
| 2600 |
interrupts = <GIC_SPI 673 IRQ_TYPE_LEVEL_HIGH>, |
| 2601 |
<GIC_SPI 678 IRQ_TYPE_LEVEL_HIGH>, |
| 2602 |
<GIC_SPI 679 IRQ_TYPE_LEVEL_HIGH>, |
| 2603 |
<GIC_SPI 680 IRQ_TYPE_LEVEL_HIGH>, |
| 2604 |
<GIC_SPI 681 IRQ_TYPE_LEVEL_HIGH>, |
| 2605 |
<GIC_SPI 682 IRQ_TYPE_LEVEL_HIGH>, |
| 2606 |
<GIC_SPI 683 IRQ_TYPE_LEVEL_HIGH>, |
| 2607 |
<GIC_SPI 684 IRQ_TYPE_LEVEL_HIGH>, |
| 2608 |
<GIC_SPI 685 IRQ_TYPE_LEVEL_HIGH>, |
| 2609 |
<GIC_SPI 686 IRQ_TYPE_LEVEL_HIGH>, |
| 2610 |
<GIC_SPI 687 IRQ_TYPE_LEVEL_HIGH>, |
| 2611 |
<GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>, |
| 2612 |
<GIC_SPI 476 IRQ_TYPE_LEVEL_HIGH>, |
| 2613 |
<GIC_SPI 574 IRQ_TYPE_LEVEL_HIGH>, |
| 2614 |
<GIC_SPI 575 IRQ_TYPE_LEVEL_HIGH>, |
| 2615 |
<GIC_SPI 576 IRQ_TYPE_LEVEL_HIGH>, |
| 2616 |
<GIC_SPI 577 IRQ_TYPE_LEVEL_HIGH>, |
| 2617 |
<GIC_SPI 659 IRQ_TYPE_LEVEL_HIGH>, |
| 2618 |
<GIC_SPI 661 IRQ_TYPE_LEVEL_HIGH>, |
| 2619 |
<GIC_SPI 664 IRQ_TYPE_LEVEL_HIGH>, |
| 2620 |
<GIC_SPI 665 IRQ_TYPE_LEVEL_HIGH>, |
| 2621 |
<GIC_SPI 666 IRQ_TYPE_LEVEL_HIGH>, |
| 2622 |
<GIC_SPI 668 IRQ_TYPE_LEVEL_HIGH>, |
| 2623 |
<GIC_SPI 669 IRQ_TYPE_LEVEL_HIGH>, |
| 2624 |
<GIC_SPI 699 IRQ_TYPE_LEVEL_HIGH>, |
| 2625 |
<GIC_SPI 700 IRQ_TYPE_LEVEL_HIGH>; |
| 2626 |
clocks = <&gpucc GPU_CC_CX_GMU_CLK>, |
| 2627 |
<&gpucc GPU_CC_HUB_CX_INT_CLK>, |
| 2628 |
<&gpucc GPU_CC_HLOS1_VOTE_GPU_SMMU_CLK>, |
| 2629 |
<&gcc GCC_GPU_MEMNOC_GFX_CLK>, |
| 2630 |
<&gcc GCC_GPU_SNOC_DVM_GFX_CLK>, |
| 2631 |
<&gpucc GPU_CC_AHB_CLK>; |
| 2632 |
clock-names = "gmu", |
| 2633 |
"hub", |
| 2634 |
"hlos", |
| 2635 |
"bus", |
| 2636 |
"iface", |
| 2637 |
"ahb"; |
| 2638 |
power-domains = <&gpucc GPU_CX_GDSC>; |
| 2639 |
dma-coherent; |
| 2640 |
}; |
| 2641 |
|
| 2642 |
usb_1_hsphy: phy@88e3000 { |
| 2643 |
compatible = "qcom,sm8450-usb-hs-phy", |
| 2644 |
"qcom,usb-snps-hs-7nm-phy"; |
| 2645 |
reg = <0 0x088e3000 0 0x400>; |
| 2646 |
status = "disabled"; |
| 2647 |
#phy-cells = <0>; |
| 2648 |
|
| 2649 |
clocks = <&rpmhcc RPMH_CXO_CLK>; |
| 2650 |
clock-names = "ref"; |
| 2651 |
|
| 2652 |
resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>; |
| 2653 |
}; |
| 2654 |
|
| 2655 |
usb_1_qmpphy: phy@88e8000 { |
| 2656 |
compatible = "qcom,sm8450-qmp-usb3-dp-phy"; |
| 2657 |
reg = <0 0x088e8000 0 0x3000>; |
| 2658 |
|
| 2659 |
clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>, |
| 2660 |
<&rpmhcc RPMH_CXO_CLK>, |
| 2661 |
<&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>, |
| 2662 |
<&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>; |
| 2663 |
clock-names = "aux", "ref", "com_aux", "usb3_pipe"; |
| 2664 |
|
| 2665 |
resets = <&gcc GCC_USB3_DP_PHY_PRIM_BCR>, |
| 2666 |
<&gcc GCC_USB3_PHY_PRIM_BCR>; |
| 2667 |
reset-names = "phy", "common"; |
| 2668 |
|
| 2669 |
#clock-cells = <1>; |
| 2670 |
#phy-cells = <1>; |
| 2671 |
|
| 2672 |
orientation-switch; |
| 2673 |
|
| 2674 |
status = "disabled"; |
| 2675 |
|
| 2676 |
ports { |
| 2677 |
#address-cells = <1>; |
| 2678 |
#size-cells = <0>; |
| 2679 |
|
| 2680 |
port@0 { |
| 2681 |
reg = <0>; |
| 2682 |
|
| 2683 |
usb_1_qmpphy_out: endpoint { |
| 2684 |
}; |
| 2685 |
}; |
| 2686 |
|
| 2687 |
port@1 { |
| 2688 |
reg = <1>; |
| 2689 |
|
| 2690 |
usb_1_qmpphy_usb_ss_in: endpoint { |
| 2691 |
remote-endpoint = <&usb_1_dwc3_ss>; |
| 2692 |
}; |
| 2693 |
}; |
| 2694 |
|
| 2695 |
port@2 { |
| 2696 |
reg = <2>; |
| 2697 |
|
| 2698 |
usb_1_qmpphy_dp_in: endpoint { |
| 2699 |
remote-endpoint = <&mdss_dp0_out>; |
| 2700 |
}; |
| 2701 |
}; |
| 2702 |
}; |
| 2703 |
}; |
| 2704 |
|
| 2705 |
remoteproc_slpi: remoteproc@2400000 { |
| 2706 |
compatible = "qcom,sm8450-slpi-pas"; |
| 2707 |
reg = <0 0x02400000 0 0x4000>; |
| 2708 |
|
| 2709 |
interrupts-extended = <&pdc 9 IRQ_TYPE_EDGE_RISING>, |
| 2710 |
<&smp2p_slpi_in 0 IRQ_TYPE_EDGE_RISING>, |
| 2711 |
<&smp2p_slpi_in 1 IRQ_TYPE_EDGE_RISING>, |
| 2712 |
<&smp2p_slpi_in 2 IRQ_TYPE_EDGE_RISING>, |
| 2713 |
<&smp2p_slpi_in 3 IRQ_TYPE_EDGE_RISING>; |
| 2714 |
interrupt-names = "wdog", "fatal", "ready", |
| 2715 |
"handover", "stop-ack"; |
| 2716 |
|
| 2717 |
clocks = <&rpmhcc RPMH_CXO_CLK>; |
| 2718 |
clock-names = "xo"; |
| 2719 |
|
| 2720 |
power-domains = <&rpmhpd RPMHPD_LCX>, |
| 2721 |
<&rpmhpd RPMHPD_LMX>; |
| 2722 |
power-domain-names = "lcx", "lmx"; |
| 2723 |
|
| 2724 |
memory-region = <&slpi_mem>; |
| 2725 |
|
| 2726 |
qcom,qmp = <&aoss_qmp>; |
| 2727 |
|
| 2728 |
qcom,smem-states = <&smp2p_slpi_out 0>; |
| 2729 |
qcom,smem-state-names = "stop"; |
| 2730 |
|
| 2731 |
status = "disabled"; |
| 2732 |
|
| 2733 |
glink-edge { |
| 2734 |
interrupts-extended = <&ipcc IPCC_CLIENT_SLPI |
| 2735 |
IPCC_MPROC_SIGNAL_GLINK_QMP |
| 2736 |
IRQ_TYPE_EDGE_RISING>; |
| 2737 |
mboxes = <&ipcc IPCC_CLIENT_SLPI |
| 2738 |
IPCC_MPROC_SIGNAL_GLINK_QMP>; |
| 2739 |
|
| 2740 |
label = "slpi"; |
| 2741 |
qcom,remote-pid = <3>; |
| 2742 |
|
| 2743 |
fastrpc { |
| 2744 |
compatible = "qcom,fastrpc"; |
| 2745 |
qcom,glink-channels = "fastrpcglink-apps-dsp"; |
| 2746 |
label = "sdsp"; |
| 2747 |
qcom,non-secure-domain; |
| 2748 |
#address-cells = <1>; |
| 2749 |
#size-cells = <0>; |
| 2750 |
|
| 2751 |
compute-cb@1 { |
| 2752 |
compatible = "qcom,fastrpc-compute-cb"; |
| 2753 |
reg = <1>; |
| 2754 |
iommus = <&apps_smmu 0x0541 0x0>; |
| 2755 |
}; |
| 2756 |
|
| 2757 |
compute-cb@2 { |
| 2758 |
compatible = "qcom,fastrpc-compute-cb"; |
| 2759 |
reg = <2>; |
| 2760 |
iommus = <&apps_smmu 0x0542 0x0>; |
| 2761 |
}; |
| 2762 |
|
| 2763 |
compute-cb@3 { |
| 2764 |
compatible = "qcom,fastrpc-compute-cb"; |
| 2765 |
reg = <3>; |
| 2766 |
iommus = <&apps_smmu 0x0543 0x0>; |
| 2767 |
/* note: shared-cb = <4> in downstream */ |
| 2768 |
}; |
| 2769 |
}; |
| 2770 |
}; |
| 2771 |
}; |
| 2772 |
|
| 2773 |
remoteproc_adsp: remoteproc@3000000 { |
| 2774 |
compatible = "qcom,sm8450-adsp-pas"; |
| 2775 |
reg = <0x0 0x03000000 0x0 0x10000>; |
| 2776 |
|
| 2777 |
interrupts-extended = <&pdc 6 IRQ_TYPE_EDGE_RISING>, |
| 2778 |
<&smp2p_adsp_in 0 IRQ_TYPE_EDGE_RISING>, |
| 2779 |
<&smp2p_adsp_in 1 IRQ_TYPE_EDGE_RISING>, |
| 2780 |
<&smp2p_adsp_in 2 IRQ_TYPE_EDGE_RISING>, |
| 2781 |
<&smp2p_adsp_in 3 IRQ_TYPE_EDGE_RISING>; |
| 2782 |
interrupt-names = "wdog", "fatal", "ready", |
| 2783 |
"handover", "stop-ack"; |
| 2784 |
|
| 2785 |
clocks = <&rpmhcc RPMH_CXO_CLK>; |
| 2786 |
clock-names = "xo"; |
| 2787 |
|
| 2788 |
power-domains = <&rpmhpd RPMHPD_LCX>, |
| 2789 |
<&rpmhpd RPMHPD_LMX>; |
| 2790 |
power-domain-names = "lcx", "lmx"; |
| 2791 |
|
| 2792 |
memory-region = <&adsp_mem>; |
| 2793 |
|
| 2794 |
qcom,qmp = <&aoss_qmp>; |
| 2795 |
|
| 2796 |
qcom,smem-states = <&smp2p_adsp_out 0>; |
| 2797 |
qcom,smem-state-names = "stop"; |
| 2798 |
|
| 2799 |
status = "disabled"; |
| 2800 |
|
| 2801 |
remoteproc_adsp_glink: glink-edge { |
| 2802 |
interrupts-extended = <&ipcc IPCC_CLIENT_LPASS |
| 2803 |
IPCC_MPROC_SIGNAL_GLINK_QMP |
| 2804 |
IRQ_TYPE_EDGE_RISING>; |
| 2805 |
mboxes = <&ipcc IPCC_CLIENT_LPASS |
| 2806 |
IPCC_MPROC_SIGNAL_GLINK_QMP>; |
| 2807 |
|
| 2808 |
label = "lpass"; |
| 2809 |
qcom,remote-pid = <2>; |
| 2810 |
|
| 2811 |
gpr { |
| 2812 |
compatible = "qcom,gpr"; |
| 2813 |
qcom,glink-channels = "adsp_apps"; |
| 2814 |
qcom,domain = <GPR_DOMAIN_ID_ADSP>; |
| 2815 |
qcom,intents = <512 20>; |
| 2816 |
#address-cells = <1>; |
| 2817 |
#size-cells = <0>; |
| 2818 |
|
| 2819 |
q6apm: service@1 { |
| 2820 |
compatible = "qcom,q6apm"; |
| 2821 |
reg = <GPR_APM_MODULE_IID>; |
| 2822 |
#sound-dai-cells = <0>; |
| 2823 |
qcom,protection-domain = "avs/audio", |
| 2824 |
"msm/adsp/audio_pd"; |
| 2825 |
|
| 2826 |
q6apmdai: dais { |
| 2827 |
compatible = "qcom,q6apm-dais"; |
| 2828 |
iommus = <&apps_smmu 0x1801 0x0>; |
| 2829 |
}; |
| 2830 |
|
| 2831 |
q6apmbedai: bedais { |
| 2832 |
compatible = "qcom,q6apm-lpass-dais"; |
| 2833 |
#sound-dai-cells = <1>; |
| 2834 |
}; |
| 2835 |
}; |
| 2836 |
|
| 2837 |
q6prm: service@2 { |
| 2838 |
compatible = "qcom,q6prm"; |
| 2839 |
reg = <GPR_PRM_MODULE_IID>; |
| 2840 |
qcom,protection-domain = "avs/audio", |
| 2841 |
"msm/adsp/audio_pd"; |
| 2842 |
|
| 2843 |
q6prmcc: clock-controller { |
| 2844 |
compatible = "qcom,q6prm-lpass-clocks"; |
| 2845 |
#clock-cells = <2>; |
| 2846 |
}; |
| 2847 |
}; |
| 2848 |
}; |
| 2849 |
|
| 2850 |
fastrpc { |
| 2851 |
compatible = "qcom,fastrpc"; |
| 2852 |
qcom,glink-channels = "fastrpcglink-apps-dsp"; |
| 2853 |
label = "adsp"; |
| 2854 |
qcom,non-secure-domain; |
| 2855 |
#address-cells = <1>; |
| 2856 |
#size-cells = <0>; |
| 2857 |
|
| 2858 |
compute-cb@3 { |
| 2859 |
compatible = "qcom,fastrpc-compute-cb"; |
| 2860 |
reg = <3>; |
| 2861 |
iommus = <&apps_smmu 0x1803 0x0>; |
| 2862 |
}; |
| 2863 |
|
| 2864 |
compute-cb@4 { |
| 2865 |
compatible = "qcom,fastrpc-compute-cb"; |
| 2866 |
reg = <4>; |
| 2867 |
iommus = <&apps_smmu 0x1804 0x0>; |
| 2868 |
}; |
| 2869 |
|
| 2870 |
compute-cb@5 { |
| 2871 |
compatible = "qcom,fastrpc-compute-cb"; |
| 2872 |
reg = <5>; |
| 2873 |
iommus = <&apps_smmu 0x1805 0x0>; |
| 2874 |
}; |
| 2875 |
}; |
| 2876 |
}; |
| 2877 |
}; |
| 2878 |
|
| 2879 |
wsa2macro: codec@31e0000 { |
| 2880 |
compatible = "qcom,sm8450-lpass-wsa-macro"; |
| 2881 |
reg = <0 0x031e0000 0 0x1000>; |
| 2882 |
clocks = <&q6prmcc LPASS_CLK_ID_WSA2_CORE_TX_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>, |
| 2883 |
<&q6prmcc LPASS_CLK_ID_WSA2_CORE_TX_2X_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>, |
| 2884 |
<&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, |
| 2885 |
<&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, |
| 2886 |
<&vamacro>; |
| 2887 |
clock-names = "mclk", "npl", "macro", "dcodec", "fsgen"; |
| 2888 |
|
| 2889 |
#clock-cells = <0>; |
| 2890 |
clock-output-names = "wsa2-mclk"; |
| 2891 |
#sound-dai-cells = <1>; |
| 2892 |
}; |
| 2893 |
|
| 2894 |
swr4: soundwire@31f0000 { |
| 2895 |
compatible = "qcom,soundwire-v1.7.0"; |
| 2896 |
reg = <0 0x031f0000 0 0x2000>; |
| 2897 |
interrupts = <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>; |
| 2898 |
clocks = <&wsa2macro>; |
| 2899 |
clock-names = "iface"; |
| 2900 |
label = "WSA2"; |
| 2901 |
|
| 2902 |
pinctrl-0 = <&wsa2_swr_active>; |
| 2903 |
pinctrl-names = "default"; |
| 2904 |
|
| 2905 |
qcom,din-ports = <2>; |
| 2906 |
qcom,dout-ports = <6>; |
| 2907 |
|
| 2908 |
qcom,ports-sinterval-low = /bits/ 8 <0x07 0x1f 0x3f 0x07 0x1f 0x3f 0x0f 0x0f>; |
| 2909 |
qcom,ports-offset1 = /bits/ 8 <0x01 0x02 0x0c 0x06 0x12 0x0d 0x07 0x0a>; |
| 2910 |
qcom,ports-offset2 = /bits/ 8 <0xff 0x00 0x1f 0xff 0x00 0x1f 0x00 0x00>; |
| 2911 |
qcom,ports-hstart = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>; |
| 2912 |
qcom,ports-hstop = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>; |
| 2913 |
qcom,ports-word-length = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>; |
| 2914 |
qcom,ports-block-pack-mode = /bits/ 8 <0xff 0xff 0x01 0xff 0xff 0x01 0xff 0xff>; |
| 2915 |
qcom,ports-block-group-count = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>; |
| 2916 |
qcom,ports-lane-control = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>; |
| 2917 |
|
| 2918 |
#address-cells = <2>; |
| 2919 |
#size-cells = <0>; |
| 2920 |
#sound-dai-cells = <1>; |
| 2921 |
status = "disabled"; |
| 2922 |
}; |
| 2923 |
|
| 2924 |
rxmacro: codec@3200000 { |
| 2925 |
compatible = "qcom,sm8450-lpass-rx-macro"; |
| 2926 |
reg = <0 0x03200000 0 0x1000>; |
| 2927 |
clocks = <&q6prmcc LPASS_CLK_ID_RX_CORE_TX_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>, |
| 2928 |
<&q6prmcc LPASS_CLK_ID_RX_CORE_MCLK2_2X_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>, |
| 2929 |
<&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, |
| 2930 |
<&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, |
| 2931 |
<&vamacro>; |
| 2932 |
clock-names = "mclk", "npl", "macro", "dcodec", "fsgen"; |
| 2933 |
|
| 2934 |
#clock-cells = <0>; |
| 2935 |
clock-output-names = "mclk"; |
| 2936 |
#sound-dai-cells = <1>; |
| 2937 |
}; |
| 2938 |
|
| 2939 |
swr1: soundwire@3210000 { |
| 2940 |
compatible = "qcom,soundwire-v1.7.0"; |
| 2941 |
reg = <0 0x03210000 0 0x2000>; |
| 2942 |
interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>; |
| 2943 |
clocks = <&rxmacro>; |
| 2944 |
clock-names = "iface"; |
| 2945 |
label = "RX"; |
| 2946 |
qcom,din-ports = <0>; |
| 2947 |
qcom,dout-ports = <5>; |
| 2948 |
|
| 2949 |
pinctrl-0 = <&rx_swr_active>; |
| 2950 |
pinctrl-names = "default"; |
| 2951 |
|
| 2952 |
qcom,ports-sinterval-low = /bits/ 8 <0x03 0x1f 0x1f 0x07 0x00>; |
| 2953 |
qcom,ports-offset1 = /bits/ 8 <0x00 0x00 0x0b 0x01 0x00>; |
| 2954 |
qcom,ports-offset2 = /bits/ 8 <0x00 0x00 0x0b 0x00 0x00>; |
| 2955 |
qcom,ports-hstart = /bits/ 8 <0xff 0x03 0xff 0xff 0xff>; |
| 2956 |
qcom,ports-hstop = /bits/ 8 <0xff 0x06 0xff 0xff 0xff>; |
| 2957 |
qcom,ports-word-length = /bits/ 8 <0x01 0x07 0x04 0xff 0xff>; |
| 2958 |
qcom,ports-block-pack-mode = /bits/ 8 <0xff 0x00 0x01 0xff 0xff>; |
| 2959 |
qcom,ports-block-group-count = /bits/ 8 <0xff 0xff 0xff 0xff 0x00>; |
| 2960 |
qcom,ports-lane-control = /bits/ 8 <0x01 0x00 0x00 0x00 0x00>; |
| 2961 |
|
| 2962 |
#address-cells = <2>; |
| 2963 |
#size-cells = <0>; |
| 2964 |
#sound-dai-cells = <1>; |
| 2965 |
status = "disabled"; |
| 2966 |
}; |
| 2967 |
|
| 2968 |
txmacro: codec@3220000 { |
| 2969 |
compatible = "qcom,sm8450-lpass-tx-macro"; |
| 2970 |
reg = <0 0x03220000 0 0x1000>; |
| 2971 |
clocks = <&q6prmcc LPASS_CLK_ID_RX_CORE_TX_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>, |
| 2972 |
<&q6prmcc LPASS_CLK_ID_RX_CORE_MCLK2_2X_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>, |
| 2973 |
<&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, |
| 2974 |
<&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, |
| 2975 |
<&vamacro>; |
| 2976 |
clock-names = "mclk", "npl", "macro", "dcodec", "fsgen"; |
| 2977 |
|
| 2978 |
#clock-cells = <0>; |
| 2979 |
clock-output-names = "mclk"; |
| 2980 |
#sound-dai-cells = <1>; |
| 2981 |
}; |
| 2982 |
|
| 2983 |
wsamacro: codec@3240000 { |
| 2984 |
compatible = "qcom,sm8450-lpass-wsa-macro"; |
| 2985 |
reg = <0 0x03240000 0 0x1000>; |
| 2986 |
clocks = <&q6prmcc LPASS_CLK_ID_WSA_CORE_TX_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>, |
| 2987 |
<&q6prmcc LPASS_CLK_ID_WSA_CORE_TX_2X_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>, |
| 2988 |
<&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, |
| 2989 |
<&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, |
| 2990 |
<&vamacro>; |
| 2991 |
clock-names = "mclk", "npl", "macro", "dcodec", "fsgen"; |
| 2992 |
|
| 2993 |
#clock-cells = <0>; |
| 2994 |
clock-output-names = "mclk"; |
| 2995 |
#sound-dai-cells = <1>; |
| 2996 |
}; |
| 2997 |
|
| 2998 |
swr0: soundwire@3250000 { |
| 2999 |
compatible = "qcom,soundwire-v1.7.0"; |
| 3000 |
reg = <0 0x03250000 0 0x2000>; |
| 3001 |
interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>; |
| 3002 |
clocks = <&wsamacro>; |
| 3003 |
clock-names = "iface"; |
| 3004 |
label = "WSA"; |
| 3005 |
|
| 3006 |
pinctrl-0 = <&wsa_swr_active>; |
| 3007 |
pinctrl-names = "default"; |
| 3008 |
|
| 3009 |
qcom,din-ports = <2>; |
| 3010 |
qcom,dout-ports = <6>; |
| 3011 |
|
| 3012 |
qcom,ports-sinterval-low = /bits/ 8 <0x07 0x1f 0x3f 0x07 0x1f 0x3f 0x0f 0x0f>; |
| 3013 |
qcom,ports-offset1 = /bits/ 8 <0x01 0x02 0x0c 0x06 0x12 0x0d 0x07 0x0a>; |
| 3014 |
qcom,ports-offset2 = /bits/ 8 <0xff 0x00 0x1f 0xff 0x00 0x1f 0x00 0x00>; |
| 3015 |
qcom,ports-hstart = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>; |
| 3016 |
qcom,ports-hstop = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>; |
| 3017 |
qcom,ports-word-length = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>; |
| 3018 |
qcom,ports-block-pack-mode = /bits/ 8 <0xff 0xff 0x01 0xff 0xff 0x01 0xff 0xff>; |
| 3019 |
qcom,ports-block-group-count = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>; |
| 3020 |
qcom,ports-lane-control = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>; |
| 3021 |
|
| 3022 |
#address-cells = <2>; |
| 3023 |
#size-cells = <0>; |
| 3024 |
#sound-dai-cells = <1>; |
| 3025 |
status = "disabled"; |
| 3026 |
}; |
| 3027 |
|
| 3028 |
swr2: soundwire@33b0000 { |
| 3029 |
compatible = "qcom,soundwire-v1.7.0"; |
| 3030 |
reg = <0 0x033b0000 0 0x2000>; |
| 3031 |
interrupts = <GIC_SPI 496 IRQ_TYPE_LEVEL_HIGH>, |
| 3032 |
<GIC_SPI 520 IRQ_TYPE_LEVEL_HIGH>; |
| 3033 |
interrupt-names = "core", "wakeup"; |
| 3034 |
|
| 3035 |
clocks = <&txmacro>; |
| 3036 |
clock-names = "iface"; |
| 3037 |
label = "TX"; |
| 3038 |
|
| 3039 |
pinctrl-0 = <&tx_swr_active>; |
| 3040 |
pinctrl-names = "default"; |
| 3041 |
|
| 3042 |
qcom,din-ports = <4>; |
| 3043 |
qcom,dout-ports = <0>; |
| 3044 |
qcom,ports-sinterval-low = /bits/ 8 <0x01 0x01 0x03 0x03>; |
| 3045 |
qcom,ports-offset1 = /bits/ 8 <0x00 0x00 0x01 0x01>; |
| 3046 |
qcom,ports-offset2 = /bits/ 8 <0x00 0x00 0x00 0x00>; |
| 3047 |
qcom,ports-hstart = /bits/ 8 <0xff 0xff 0xff 0xff>; |
| 3048 |
qcom,ports-hstop = /bits/ 8 <0xff 0xff 0xff 0xff>; |
| 3049 |
qcom,ports-word-length = /bits/ 8 <0xff 0xff 0xff 0xff>; |
| 3050 |
qcom,ports-block-pack-mode = /bits/ 8 <0xff 0xff 0xff 0xff>; |
| 3051 |
qcom,ports-block-group-count = /bits/ 8 <0xff 0xff 0xff 0xff>; |
| 3052 |
qcom,ports-lane-control = /bits/ 8 <0x01 0x02 0x00 0x00>; |
| 3053 |
|
| 3054 |
#address-cells = <2>; |
| 3055 |
#size-cells = <0>; |
| 3056 |
#sound-dai-cells = <1>; |
| 3057 |
status = "disabled"; |
| 3058 |
}; |
| 3059 |
|
| 3060 |
vamacro: codec@33f0000 { |
| 3061 |
compatible = "qcom,sm8450-lpass-va-macro"; |
| 3062 |
reg = <0 0x033f0000 0 0x1000>; |
| 3063 |
clocks = <&q6prmcc LPASS_CLK_ID_TX_CORE_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>, |
| 3064 |
<&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, |
| 3065 |
<&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, |
| 3066 |
<&q6prmcc LPASS_CLK_ID_RX_CORE_MCLK2_2X_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>; |
| 3067 |
clock-names = "mclk", "macro", "dcodec", "npl"; |
| 3068 |
|
| 3069 |
#clock-cells = <0>; |
| 3070 |
clock-output-names = "fsgen"; |
| 3071 |
#sound-dai-cells = <1>; |
| 3072 |
status = "disabled"; |
| 3073 |
}; |
| 3074 |
|
| 3075 |
remoteproc_cdsp: remoteproc@32300000 { |
| 3076 |
compatible = "qcom,sm8450-cdsp-pas"; |
| 3077 |
reg = <0 0x32300000 0 0x10000>; |
| 3078 |
|
| 3079 |
interrupts-extended = <&intc GIC_SPI 578 IRQ_TYPE_EDGE_RISING>, |
| 3080 |
<&smp2p_cdsp_in 0 IRQ_TYPE_EDGE_RISING>, |
| 3081 |
<&smp2p_cdsp_in 1 IRQ_TYPE_EDGE_RISING>, |
| 3082 |
<&smp2p_cdsp_in 2 IRQ_TYPE_EDGE_RISING>, |
| 3083 |
<&smp2p_cdsp_in 3 IRQ_TYPE_EDGE_RISING>; |
| 3084 |
interrupt-names = "wdog", "fatal", "ready", |
| 3085 |
"handover", "stop-ack"; |
| 3086 |
|
| 3087 |
clocks = <&rpmhcc RPMH_CXO_CLK>; |
| 3088 |
clock-names = "xo"; |
| 3089 |
|
| 3090 |
power-domains = <&rpmhpd RPMHPD_CX>, |
| 3091 |
<&rpmhpd RPMHPD_MXC>; |
| 3092 |
power-domain-names = "cx", "mxc"; |
| 3093 |
|
| 3094 |
memory-region = <&cdsp_mem>; |
| 3095 |
|
| 3096 |
qcom,qmp = <&aoss_qmp>; |
| 3097 |
|
| 3098 |
qcom,smem-states = <&smp2p_cdsp_out 0>; |
| 3099 |
qcom,smem-state-names = "stop"; |
| 3100 |
|
| 3101 |
status = "disabled"; |
| 3102 |
|
| 3103 |
glink-edge { |
| 3104 |
interrupts-extended = <&ipcc IPCC_CLIENT_CDSP |
| 3105 |
IPCC_MPROC_SIGNAL_GLINK_QMP |
| 3106 |
IRQ_TYPE_EDGE_RISING>; |
| 3107 |
mboxes = <&ipcc IPCC_CLIENT_CDSP |
| 3108 |
IPCC_MPROC_SIGNAL_GLINK_QMP>; |
| 3109 |
|
| 3110 |
label = "cdsp"; |
| 3111 |
qcom,remote-pid = <5>; |
| 3112 |
|
| 3113 |
fastrpc { |
| 3114 |
compatible = "qcom,fastrpc"; |
| 3115 |
qcom,glink-channels = "fastrpcglink-apps-dsp"; |
| 3116 |
label = "cdsp"; |
| 3117 |
qcom,non-secure-domain; |
| 3118 |
#address-cells = <1>; |
| 3119 |
#size-cells = <0>; |
| 3120 |
|
| 3121 |
compute-cb@1 { |
| 3122 |
compatible = "qcom,fastrpc-compute-cb"; |
| 3123 |
reg = <1>; |
| 3124 |
iommus = <&apps_smmu 0x2161 0x0400>, |
| 3125 |
<&apps_smmu 0x1021 0x1420>; |
| 3126 |
}; |
| 3127 |
|
| 3128 |
compute-cb@2 { |
| 3129 |
compatible = "qcom,fastrpc-compute-cb"; |
| 3130 |
reg = <2>; |
| 3131 |
iommus = <&apps_smmu 0x2162 0x0400>, |
| 3132 |
<&apps_smmu 0x1022 0x1420>; |
| 3133 |
}; |
| 3134 |
|
| 3135 |
compute-cb@3 { |
| 3136 |
compatible = "qcom,fastrpc-compute-cb"; |
| 3137 |
reg = <3>; |
| 3138 |
iommus = <&apps_smmu 0x2163 0x0400>, |
| 3139 |
<&apps_smmu 0x1023 0x1420>; |
| 3140 |
}; |
| 3141 |
|
| 3142 |
compute-cb@4 { |
| 3143 |
compatible = "qcom,fastrpc-compute-cb"; |
| 3144 |
reg = <4>; |
| 3145 |
iommus = <&apps_smmu 0x2164 0x0400>, |
| 3146 |
<&apps_smmu 0x1024 0x1420>; |
| 3147 |
}; |
| 3148 |
|
| 3149 |
compute-cb@5 { |
| 3150 |
compatible = "qcom,fastrpc-compute-cb"; |
| 3151 |
reg = <5>; |
| 3152 |
iommus = <&apps_smmu 0x2165 0x0400>, |
| 3153 |
<&apps_smmu 0x1025 0x1420>; |
| 3154 |
}; |
| 3155 |
|
| 3156 |
compute-cb@6 { |
| 3157 |
compatible = "qcom,fastrpc-compute-cb"; |
| 3158 |
reg = <6>; |
| 3159 |
iommus = <&apps_smmu 0x2166 0x0400>, |
| 3160 |
<&apps_smmu 0x1026 0x1420>; |
| 3161 |
}; |
| 3162 |
|
| 3163 |
compute-cb@7 { |
| 3164 |
compatible = "qcom,fastrpc-compute-cb"; |
| 3165 |
reg = <7>; |
| 3166 |
iommus = <&apps_smmu 0x2167 0x0400>, |
| 3167 |
<&apps_smmu 0x1027 0x1420>; |
| 3168 |
}; |
| 3169 |
|
| 3170 |
compute-cb@8 { |
| 3171 |
compatible = "qcom,fastrpc-compute-cb"; |
| 3172 |
reg = <8>; |
| 3173 |
iommus = <&apps_smmu 0x2168 0x0400>, |
| 3174 |
<&apps_smmu 0x1028 0x1420>; |
| 3175 |
}; |
| 3176 |
|
| 3177 |
/* note: secure cb9 in downstream */ |
| 3178 |
}; |
| 3179 |
}; |
| 3180 |
}; |
| 3181 |
|
| 3182 |
remoteproc_mpss: remoteproc@4080000 { |
| 3183 |
compatible = "qcom,sm8450-mpss-pas"; |
| 3184 |
reg = <0x0 0x04080000 0x0 0x10000>; |
| 3185 |
|
| 3186 |
interrupts-extended = <&intc GIC_SPI 264 IRQ_TYPE_EDGE_RISING>, |
| 3187 |
<&smp2p_modem_in 0 IRQ_TYPE_EDGE_RISING>, |
| 3188 |
<&smp2p_modem_in 1 IRQ_TYPE_EDGE_RISING>, |
| 3189 |
<&smp2p_modem_in 2 IRQ_TYPE_EDGE_RISING>, |
| 3190 |
<&smp2p_modem_in 3 IRQ_TYPE_EDGE_RISING>, |
| 3191 |
<&smp2p_modem_in 7 IRQ_TYPE_EDGE_RISING>; |
| 3192 |
interrupt-names = "wdog", "fatal", "ready", "handover", |
| 3193 |
"stop-ack", "shutdown-ack"; |
| 3194 |
|
| 3195 |
clocks = <&rpmhcc RPMH_CXO_CLK>; |
| 3196 |
clock-names = "xo"; |
| 3197 |
|
| 3198 |
power-domains = <&rpmhpd RPMHPD_CX>, |
| 3199 |
<&rpmhpd RPMHPD_MSS>; |
| 3200 |
power-domain-names = "cx", "mss"; |
| 3201 |
|
| 3202 |
memory-region = <&mpss_mem>; |
| 3203 |
|
| 3204 |
qcom,qmp = <&aoss_qmp>; |
| 3205 |
|
| 3206 |
qcom,smem-states = <&smp2p_modem_out 0>; |
| 3207 |
qcom,smem-state-names = "stop"; |
| 3208 |
|
| 3209 |
status = "disabled"; |
| 3210 |
|
| 3211 |
glink-edge { |
| 3212 |
interrupts-extended = <&ipcc IPCC_CLIENT_MPSS |
| 3213 |
IPCC_MPROC_SIGNAL_GLINK_QMP |
| 3214 |
IRQ_TYPE_EDGE_RISING>; |
| 3215 |
mboxes = <&ipcc IPCC_CLIENT_MPSS |
| 3216 |
IPCC_MPROC_SIGNAL_GLINK_QMP>; |
| 3217 |
label = "modem"; |
| 3218 |
qcom,remote-pid = <1>; |
| 3219 |
}; |
| 3220 |
}; |
| 3221 |
|
| 3222 |
videocc: clock-controller@aaf0000 { |
| 3223 |
compatible = "qcom,sm8450-videocc"; |
| 3224 |
reg = <0 0x0aaf0000 0 0x10000>; |
| 3225 |
clocks = <&rpmhcc RPMH_CXO_CLK>, |
| 3226 |
<&gcc GCC_VIDEO_AHB_CLK>; |
| 3227 |
power-domains = <&rpmhpd RPMHPD_MMCX>, |
| 3228 |
<&rpmhpd RPMHPD_MXC>; |
| 3229 |
required-opps = <&rpmhpd_opp_low_svs>, |
| 3230 |
<&rpmhpd_opp_low_svs>; |
| 3231 |
#clock-cells = <1>; |
| 3232 |
#reset-cells = <1>; |
| 3233 |
#power-domain-cells = <1>; |
| 3234 |
}; |
| 3235 |
|
| 3236 |
cci0: cci@ac15000 { |
| 3237 |
compatible = "qcom,sm8450-cci", "qcom,msm8996-cci"; |
| 3238 |
reg = <0 0x0ac15000 0 0x1000>; |
| 3239 |
interrupts = <GIC_SPI 460 IRQ_TYPE_EDGE_RISING>; |
| 3240 |
power-domains = <&camcc TITAN_TOP_GDSC>; |
| 3241 |
|
| 3242 |
clocks = <&camcc CAM_CC_CAMNOC_AXI_CLK>, |
| 3243 |
<&camcc CAM_CC_SLOW_AHB_CLK_SRC>, |
| 3244 |
<&camcc CAM_CC_CPAS_AHB_CLK>, |
| 3245 |
<&camcc CAM_CC_CCI_0_CLK>, |
| 3246 |
<&camcc CAM_CC_CCI_0_CLK_SRC>; |
| 3247 |
clock-names = "camnoc_axi", |
| 3248 |
"slow_ahb_src", |
| 3249 |
"cpas_ahb", |
| 3250 |
"cci", |
| 3251 |
"cci_src"; |
| 3252 |
pinctrl-0 = <&cci0_default &cci1_default>; |
| 3253 |
pinctrl-1 = <&cci0_sleep &cci1_sleep>; |
| 3254 |
pinctrl-names = "default", "sleep"; |
| 3255 |
|
| 3256 |
status = "disabled"; |
| 3257 |
#address-cells = <1>; |
| 3258 |
#size-cells = <0>; |
| 3259 |
|
| 3260 |
cci0_i2c0: i2c-bus@0 { |
| 3261 |
reg = <0>; |
| 3262 |
clock-frequency = <1000000>; |
| 3263 |
#address-cells = <1>; |
| 3264 |
#size-cells = <0>; |
| 3265 |
}; |
| 3266 |
|
| 3267 |
cci0_i2c1: i2c-bus@1 { |
| 3268 |
reg = <1>; |
| 3269 |
clock-frequency = <1000000>; |
| 3270 |
#address-cells = <1>; |
| 3271 |
#size-cells = <0>; |
| 3272 |
}; |
| 3273 |
}; |
| 3274 |
|
| 3275 |
cci1: cci@ac16000 { |
| 3276 |
compatible = "qcom,sm8450-cci", "qcom,msm8996-cci"; |
| 3277 |
reg = <0 0x0ac16000 0 0x1000>; |
| 3278 |
interrupts = <GIC_SPI 271 IRQ_TYPE_EDGE_RISING>; |
| 3279 |
power-domains = <&camcc TITAN_TOP_GDSC>; |
| 3280 |
|
| 3281 |
clocks = <&camcc CAM_CC_CAMNOC_AXI_CLK>, |
| 3282 |
<&camcc CAM_CC_SLOW_AHB_CLK_SRC>, |
| 3283 |
<&camcc CAM_CC_CPAS_AHB_CLK>, |
| 3284 |
<&camcc CAM_CC_CCI_1_CLK>, |
| 3285 |
<&camcc CAM_CC_CCI_1_CLK_SRC>; |
| 3286 |
clock-names = "camnoc_axi", |
| 3287 |
"slow_ahb_src", |
| 3288 |
"cpas_ahb", |
| 3289 |
"cci", |
| 3290 |
"cci_src"; |
| 3291 |
pinctrl-0 = <&cci2_default &cci3_default>; |
| 3292 |
pinctrl-1 = <&cci2_sleep &cci3_sleep>; |
| 3293 |
pinctrl-names = "default", "sleep"; |
| 3294 |
|
| 3295 |
status = "disabled"; |
| 3296 |
#address-cells = <1>; |
| 3297 |
#size-cells = <0>; |
| 3298 |
|
| 3299 |
cci1_i2c0: i2c-bus@0 { |
| 3300 |
reg = <0>; |
| 3301 |
clock-frequency = <1000000>; |
| 3302 |
#address-cells = <1>; |
| 3303 |
#size-cells = <0>; |
| 3304 |
}; |
| 3305 |
|
| 3306 |
cci1_i2c1: i2c-bus@1 { |
| 3307 |
reg = <1>; |
| 3308 |
clock-frequency = <1000000>; |
| 3309 |
#address-cells = <1>; |
| 3310 |
#size-cells = <0>; |
| 3311 |
}; |
| 3312 |
}; |
| 3313 |
|
| 3314 |
camcc: clock-controller@ade0000 { |
| 3315 |
compatible = "qcom,sm8450-camcc"; |
| 3316 |
reg = <0 0x0ade0000 0 0x20000>; |
| 3317 |
clocks = <&gcc GCC_CAMERA_AHB_CLK>, |
| 3318 |
<&rpmhcc RPMH_CXO_CLK>, |
| 3319 |
<&rpmhcc RPMH_CXO_CLK_A>, |
| 3320 |
<&sleep_clk>; |
| 3321 |
power-domains = <&rpmhpd RPMHPD_MMCX>, |
| 3322 |
<&rpmhpd RPMHPD_MXC>; |
| 3323 |
required-opps = <&rpmhpd_opp_low_svs>, |
| 3324 |
<&rpmhpd_opp_low_svs>; |
| 3325 |
#clock-cells = <1>; |
| 3326 |
#reset-cells = <1>; |
| 3327 |
#power-domain-cells = <1>; |
| 3328 |
}; |
| 3329 |
|
| 3330 |
mdss: display-subsystem@ae00000 { |
| 3331 |
compatible = "qcom,sm8450-mdss"; |
| 3332 |
reg = <0 0x0ae00000 0 0x1000>; |
| 3333 |
reg-names = "mdss"; |
| 3334 |
|
| 3335 |
/* same path used twice */ |
| 3336 |
interconnects = <&mmss_noc MASTER_MDP_DISP 0 &mc_virt SLAVE_EBI1_DISP 0>, |
| 3337 |
<&mmss_noc MASTER_MDP_DISP 0 &mc_virt SLAVE_EBI1_DISP 0>, |
| 3338 |
<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY |
| 3339 |
&config_noc SLAVE_DISPLAY_CFG QCOM_ICC_TAG_ACTIVE_ONLY>; |
| 3340 |
interconnect-names = "mdp0-mem", |
| 3341 |
"mdp1-mem", |
| 3342 |
"cpu-cfg"; |
| 3343 |
|
| 3344 |
resets = <&dispcc DISP_CC_MDSS_CORE_BCR>; |
| 3345 |
|
| 3346 |
power-domains = <&dispcc MDSS_GDSC>; |
| 3347 |
|
| 3348 |
clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, |
| 3349 |
<&gcc GCC_DISP_HF_AXI_CLK>, |
| 3350 |
<&gcc GCC_DISP_SF_AXI_CLK>, |
| 3351 |
<&dispcc DISP_CC_MDSS_MDP_CLK>; |
| 3352 |
|
| 3353 |
interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; |
| 3354 |
interrupt-controller; |
| 3355 |
#interrupt-cells = <1>; |
| 3356 |
|
| 3357 |
iommus = <&apps_smmu 0x2800 0x402>; |
| 3358 |
|
| 3359 |
#address-cells = <2>; |
| 3360 |
#size-cells = <2>; |
| 3361 |
ranges; |
| 3362 |
|
| 3363 |
status = "disabled"; |
| 3364 |
|
| 3365 |
mdss_mdp: display-controller@ae01000 { |
| 3366 |
compatible = "qcom,sm8450-dpu"; |
| 3367 |
reg = <0 0x0ae01000 0 0x8f000>, |
| 3368 |
<0 0x0aeb0000 0 0x3000>; |
| 3369 |
reg-names = "mdp", "vbif"; |
| 3370 |
|
| 3371 |
clocks = <&gcc GCC_DISP_HF_AXI_CLK>, |
| 3372 |
<&gcc GCC_DISP_SF_AXI_CLK>, |
| 3373 |
<&dispcc DISP_CC_MDSS_AHB_CLK>, |
| 3374 |
<&dispcc DISP_CC_MDSS_MDP_LUT_CLK>, |
| 3375 |
<&dispcc DISP_CC_MDSS_MDP_CLK>, |
| 3376 |
<&dispcc DISP_CC_MDSS_VSYNC_CLK>; |
| 3377 |
clock-names = "bus", |
| 3378 |
"nrt_bus", |
| 3379 |
"iface", |
| 3380 |
"lut", |
| 3381 |
"core", |
| 3382 |
"vsync"; |
| 3383 |
|
| 3384 |
assigned-clocks = <&dispcc DISP_CC_MDSS_VSYNC_CLK>; |
| 3385 |
assigned-clock-rates = <19200000>; |
| 3386 |
|
| 3387 |
operating-points-v2 = <&mdp_opp_table>; |
| 3388 |
power-domains = <&rpmhpd RPMHPD_MMCX>; |
| 3389 |
|
| 3390 |
interrupt-parent = <&mdss>; |
| 3391 |
interrupts = <0>; |
| 3392 |
|
| 3393 |
ports { |
| 3394 |
#address-cells = <1>; |
| 3395 |
#size-cells = <0>; |
| 3396 |
|
| 3397 |
port@0 { |
| 3398 |
reg = <0>; |
| 3399 |
dpu_intf1_out: endpoint { |
| 3400 |
remote-endpoint = <&mdss_dsi0_in>; |
| 3401 |
}; |
| 3402 |
}; |
| 3403 |
|
| 3404 |
port@1 { |
| 3405 |
reg = <1>; |
| 3406 |
dpu_intf2_out: endpoint { |
| 3407 |
remote-endpoint = <&mdss_dsi1_in>; |
| 3408 |
}; |
| 3409 |
}; |
| 3410 |
|
| 3411 |
port@2 { |
| 3412 |
reg = <2>; |
| 3413 |
dpu_intf0_out: endpoint { |
| 3414 |
remote-endpoint = <&mdss_dp0_in>; |
| 3415 |
}; |
| 3416 |
}; |
| 3417 |
}; |
| 3418 |
|
| 3419 |
mdp_opp_table: opp-table { |
| 3420 |
compatible = "operating-points-v2"; |
| 3421 |
|
| 3422 |
opp-172000000 { |
| 3423 |
opp-hz = /bits/ 64 <172000000>; |
| 3424 |
required-opps = <&rpmhpd_opp_low_svs_d1>; |
| 3425 |
}; |
| 3426 |
|
| 3427 |
opp-200000000 { |
| 3428 |
opp-hz = /bits/ 64 <200000000>; |
| 3429 |
required-opps = <&rpmhpd_opp_low_svs>; |
| 3430 |
}; |
| 3431 |
|
| 3432 |
opp-325000000 { |
| 3433 |
opp-hz = /bits/ 64 <325000000>; |
| 3434 |
required-opps = <&rpmhpd_opp_svs>; |
| 3435 |
}; |
| 3436 |
|
| 3437 |
opp-375000000 { |
| 3438 |
opp-hz = /bits/ 64 <375000000>; |
| 3439 |
required-opps = <&rpmhpd_opp_svs_l1>; |
| 3440 |
}; |
| 3441 |
|
| 3442 |
opp-500000000 { |
| 3443 |
opp-hz = /bits/ 64 <500000000>; |
| 3444 |
required-opps = <&rpmhpd_opp_nom>; |
| 3445 |
}; |
| 3446 |
}; |
| 3447 |
}; |
| 3448 |
|
| 3449 |
mdss_dp0: displayport-controller@ae90000 { |
| 3450 |
compatible = "qcom,sm8450-dp", "qcom,sm8350-dp"; |
| 3451 |
reg = <0 0xae90000 0 0x200>, |
| 3452 |
<0 0xae90200 0 0x200>, |
| 3453 |
<0 0xae90400 0 0xc00>, |
| 3454 |
<0 0xae91000 0 0x400>, |
| 3455 |
<0 0xae91400 0 0x400>; |
| 3456 |
interrupt-parent = <&mdss>; |
| 3457 |
interrupts = <12>; |
| 3458 |
clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, |
| 3459 |
<&dispcc DISP_CC_MDSS_DPTX0_AUX_CLK>, |
| 3460 |
<&dispcc DISP_CC_MDSS_DPTX0_LINK_CLK>, |
| 3461 |
<&dispcc DISP_CC_MDSS_DPTX0_LINK_INTF_CLK>, |
| 3462 |
<&dispcc DISP_CC_MDSS_DPTX0_PIXEL0_CLK>, |
| 3463 |
<&dispcc DISP_CC_MDSS_DPTX0_PIXEL1_CLK>; |
| 3464 |
clock-names = "core_iface", |
| 3465 |
"core_aux", |
| 3466 |
"ctrl_link", |
| 3467 |
"ctrl_link_iface", |
| 3468 |
"stream_pixel", |
| 3469 |
"stream_1_pixel"; |
| 3470 |
|
| 3471 |
assigned-clocks = <&dispcc DISP_CC_MDSS_DPTX0_LINK_CLK_SRC>, |
| 3472 |
<&dispcc DISP_CC_MDSS_DPTX0_PIXEL0_CLK_SRC>, |
| 3473 |
<&dispcc DISP_CC_MDSS_DPTX0_PIXEL1_CLK_SRC>; |
| 3474 |
assigned-clock-parents = <&usb_1_qmpphy QMP_USB43DP_DP_LINK_CLK>, |
| 3475 |
<&usb_1_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>, |
| 3476 |
<&usb_1_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>; |
| 3477 |
|
| 3478 |
phys = <&usb_1_qmpphy QMP_USB43DP_DP_PHY>; |
| 3479 |
phy-names = "dp"; |
| 3480 |
|
| 3481 |
#sound-dai-cells = <0>; |
| 3482 |
|
| 3483 |
operating-points-v2 = <&dp_opp_table>; |
| 3484 |
power-domains = <&rpmhpd RPMHPD_MMCX>; |
| 3485 |
|
| 3486 |
status = "disabled"; |
| 3487 |
|
| 3488 |
ports { |
| 3489 |
#address-cells = <1>; |
| 3490 |
#size-cells = <0>; |
| 3491 |
|
| 3492 |
port@0 { |
| 3493 |
reg = <0>; |
| 3494 |
mdss_dp0_in: endpoint { |
| 3495 |
remote-endpoint = <&dpu_intf0_out>; |
| 3496 |
}; |
| 3497 |
}; |
| 3498 |
|
| 3499 |
port@1 { |
| 3500 |
reg = <1>; |
| 3501 |
|
| 3502 |
mdss_dp0_out: endpoint { |
| 3503 |
remote-endpoint = <&usb_1_qmpphy_dp_in>; |
| 3504 |
}; |
| 3505 |
}; |
| 3506 |
}; |
| 3507 |
|
| 3508 |
dp_opp_table: opp-table { |
| 3509 |
compatible = "operating-points-v2"; |
| 3510 |
|
| 3511 |
opp-160000000 { |
| 3512 |
opp-hz = /bits/ 64 <160000000>; |
| 3513 |
required-opps = <&rpmhpd_opp_low_svs>; |
| 3514 |
}; |
| 3515 |
|
| 3516 |
opp-270000000 { |
| 3517 |
opp-hz = /bits/ 64 <270000000>; |
| 3518 |
required-opps = <&rpmhpd_opp_svs>; |
| 3519 |
}; |
| 3520 |
|
| 3521 |
opp-540000000 { |
| 3522 |
opp-hz = /bits/ 64 <540000000>; |
| 3523 |
required-opps = <&rpmhpd_opp_svs_l1>; |
| 3524 |
}; |
| 3525 |
|
| 3526 |
opp-810000000 { |
| 3527 |
opp-hz = /bits/ 64 <810000000>; |
| 3528 |
required-opps = <&rpmhpd_opp_nom>; |
| 3529 |
}; |
| 3530 |
}; |
| 3531 |
}; |
| 3532 |
|
| 3533 |
mdss_dsi0: dsi@ae94000 { |
| 3534 |
compatible = "qcom,sm8450-dsi-ctrl", "qcom,mdss-dsi-ctrl"; |
| 3535 |
reg = <0 0x0ae94000 0 0x400>; |
| 3536 |
reg-names = "dsi_ctrl"; |
| 3537 |
|
| 3538 |
interrupt-parent = <&mdss>; |
| 3539 |
interrupts = <4>; |
| 3540 |
|
| 3541 |
clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>, |
| 3542 |
<&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>, |
| 3543 |
<&dispcc DISP_CC_MDSS_PCLK0_CLK>, |
| 3544 |
<&dispcc DISP_CC_MDSS_ESC0_CLK>, |
| 3545 |
<&dispcc DISP_CC_MDSS_AHB_CLK>, |
| 3546 |
<&gcc GCC_DISP_HF_AXI_CLK>; |
| 3547 |
clock-names = "byte", |
| 3548 |
"byte_intf", |
| 3549 |
"pixel", |
| 3550 |
"core", |
| 3551 |
"iface", |
| 3552 |
"bus"; |
| 3553 |
|
| 3554 |
assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>, |
| 3555 |
<&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>; |
| 3556 |
assigned-clock-parents = <&mdss_dsi0_phy DSI_BYTE_PLL_CLK>, |
| 3557 |
<&mdss_dsi0_phy DSI_PIXEL_PLL_CLK>; |
| 3558 |
|
| 3559 |
operating-points-v2 = <&mdss_dsi_opp_table>; |
| 3560 |
power-domains = <&rpmhpd RPMHPD_MMCX>; |
| 3561 |
|
| 3562 |
phys = <&mdss_dsi0_phy>; |
| 3563 |
phy-names = "dsi"; |
| 3564 |
|
| 3565 |
#address-cells = <1>; |
| 3566 |
#size-cells = <0>; |
| 3567 |
|
| 3568 |
status = "disabled"; |
| 3569 |
|
| 3570 |
ports { |
| 3571 |
#address-cells = <1>; |
| 3572 |
#size-cells = <0>; |
| 3573 |
|
| 3574 |
port@0 { |
| 3575 |
reg = <0>; |
| 3576 |
mdss_dsi0_in: endpoint { |
| 3577 |
remote-endpoint = <&dpu_intf1_out>; |
| 3578 |
}; |
| 3579 |
}; |
| 3580 |
|
| 3581 |
port@1 { |
| 3582 |
reg = <1>; |
| 3583 |
mdss_dsi0_out: endpoint { |
| 3584 |
}; |
| 3585 |
}; |
| 3586 |
}; |
| 3587 |
|
| 3588 |
mdss_dsi_opp_table: opp-table { |
| 3589 |
compatible = "operating-points-v2"; |
| 3590 |
|
| 3591 |
opp-187500000 { |
| 3592 |
opp-hz = /bits/ 64 <187500000>; |
| 3593 |
required-opps = <&rpmhpd_opp_low_svs>; |
| 3594 |
}; |
| 3595 |
|
| 3596 |
opp-300000000 { |
| 3597 |
opp-hz = /bits/ 64 <300000000>; |
| 3598 |
required-opps = <&rpmhpd_opp_svs>; |
| 3599 |
}; |
| 3600 |
|
| 3601 |
opp-358000000 { |
| 3602 |
opp-hz = /bits/ 64 <358000000>; |
| 3603 |
required-opps = <&rpmhpd_opp_svs_l1>; |
| 3604 |
}; |
| 3605 |
}; |
| 3606 |
}; |
| 3607 |
|
| 3608 |
mdss_dsi0_phy: phy@ae94400 { |
| 3609 |
compatible = "qcom,sm8450-dsi-phy-5nm"; |
| 3610 |
reg = <0 0x0ae94400 0 0x200>, |
| 3611 |
<0 0x0ae94600 0 0x280>, |
| 3612 |
<0 0x0ae94900 0 0x260>; |
| 3613 |
reg-names = "dsi_phy", |
| 3614 |
"dsi_phy_lane", |
| 3615 |
"dsi_pll"; |
| 3616 |
|
| 3617 |
#clock-cells = <1>; |
| 3618 |
#phy-cells = <0>; |
| 3619 |
|
| 3620 |
clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, |
| 3621 |
<&rpmhcc RPMH_CXO_CLK>; |
| 3622 |
clock-names = "iface", "ref"; |
| 3623 |
|
| 3624 |
status = "disabled"; |
| 3625 |
}; |
| 3626 |
|
| 3627 |
mdss_dsi1: dsi@ae96000 { |
| 3628 |
compatible = "qcom,sm8450-dsi-ctrl", "qcom,mdss-dsi-ctrl"; |
| 3629 |
reg = <0 0x0ae96000 0 0x400>; |
| 3630 |
reg-names = "dsi_ctrl"; |
| 3631 |
|
| 3632 |
interrupt-parent = <&mdss>; |
| 3633 |
interrupts = <5>; |
| 3634 |
|
| 3635 |
clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK>, |
| 3636 |
<&dispcc DISP_CC_MDSS_BYTE1_INTF_CLK>, |
| 3637 |
<&dispcc DISP_CC_MDSS_PCLK1_CLK>, |
| 3638 |
<&dispcc DISP_CC_MDSS_ESC1_CLK>, |
| 3639 |
<&dispcc DISP_CC_MDSS_AHB_CLK>, |
| 3640 |
<&gcc GCC_DISP_HF_AXI_CLK>; |
| 3641 |
clock-names = "byte", |
| 3642 |
"byte_intf", |
| 3643 |
"pixel", |
| 3644 |
"core", |
| 3645 |
"iface", |
| 3646 |
"bus"; |
| 3647 |
|
| 3648 |
assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK_SRC>, |
| 3649 |
<&dispcc DISP_CC_MDSS_PCLK1_CLK_SRC>; |
| 3650 |
assigned-clock-parents = <&mdss_dsi1_phy DSI_BYTE_PLL_CLK>, |
| 3651 |
<&mdss_dsi1_phy DSI_PIXEL_PLL_CLK>; |
| 3652 |
|
| 3653 |
operating-points-v2 = <&mdss_dsi_opp_table>; |
| 3654 |
power-domains = <&rpmhpd RPMHPD_MMCX>; |
| 3655 |
|
| 3656 |
phys = <&mdss_dsi1_phy>; |
| 3657 |
phy-names = "dsi"; |
| 3658 |
|
| 3659 |
#address-cells = <1>; |
| 3660 |
#size-cells = <0>; |
| 3661 |
|
| 3662 |
status = "disabled"; |
| 3663 |
|
| 3664 |
ports { |
| 3665 |
#address-cells = <1>; |
| 3666 |
#size-cells = <0>; |
| 3667 |
|
| 3668 |
port@0 { |
| 3669 |
reg = <0>; |
| 3670 |
mdss_dsi1_in: endpoint { |
| 3671 |
remote-endpoint = <&dpu_intf2_out>; |
| 3672 |
}; |
| 3673 |
}; |
| 3674 |
|
| 3675 |
port@1 { |
| 3676 |
reg = <1>; |
| 3677 |
mdss_dsi1_out: endpoint { |
| 3678 |
}; |
| 3679 |
}; |
| 3680 |
}; |
| 3681 |
}; |
| 3682 |
|
| 3683 |
mdss_dsi1_phy: phy@ae96400 { |
| 3684 |
compatible = "qcom,sm8450-dsi-phy-5nm"; |
| 3685 |
reg = <0 0x0ae96400 0 0x200>, |
| 3686 |
<0 0x0ae96600 0 0x280>, |
| 3687 |
<0 0x0ae96900 0 0x260>; |
| 3688 |
reg-names = "dsi_phy", |
| 3689 |
"dsi_phy_lane", |
| 3690 |
"dsi_pll"; |
| 3691 |
|
| 3692 |
#clock-cells = <1>; |
| 3693 |
#phy-cells = <0>; |
| 3694 |
|
| 3695 |
clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, |
| 3696 |
<&rpmhcc RPMH_CXO_CLK>; |
| 3697 |
clock-names = "iface", "ref"; |
| 3698 |
|
| 3699 |
status = "disabled"; |
| 3700 |
}; |
| 3701 |
}; |
| 3702 |
|
| 3703 |
dispcc: clock-controller@af00000 { |
| 3704 |
compatible = "qcom,sm8450-dispcc"; |
| 3705 |
reg = <0 0x0af00000 0 0x20000>; |
| 3706 |
clocks = <&rpmhcc RPMH_CXO_CLK>, |
| 3707 |
<&rpmhcc RPMH_CXO_CLK_A>, |
| 3708 |
<&gcc GCC_DISP_AHB_CLK>, |
| 3709 |
<&sleep_clk>, |
| 3710 |
<&mdss_dsi0_phy DSI_BYTE_PLL_CLK>, |
| 3711 |
<&mdss_dsi0_phy DSI_PIXEL_PLL_CLK>, |
| 3712 |
<&mdss_dsi1_phy DSI_BYTE_PLL_CLK>, |
| 3713 |
<&mdss_dsi1_phy DSI_PIXEL_PLL_CLK>, |
| 3714 |
<&usb_1_qmpphy QMP_USB43DP_DP_LINK_CLK>, |
| 3715 |
<&usb_1_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>, |
| 3716 |
<0>, /* dp1 */ |
| 3717 |
<0>, |
| 3718 |
<0>, /* dp2 */ |
| 3719 |
<0>, |
| 3720 |
<0>, /* dp3 */ |
| 3721 |
<0>; |
| 3722 |
power-domains = <&rpmhpd RPMHPD_MMCX>; |
| 3723 |
required-opps = <&rpmhpd_opp_low_svs>; |
| 3724 |
#clock-cells = <1>; |
| 3725 |
#reset-cells = <1>; |
| 3726 |
#power-domain-cells = <1>; |
| 3727 |
}; |
| 3728 |
|
| 3729 |
pdc: interrupt-controller@b220000 { |
| 3730 |
compatible = "qcom,sm8450-pdc", "qcom,pdc"; |
| 3731 |
reg = <0 0x0b220000 0 0x30000>, <0 0x174000f0 0 0x64>; |
| 3732 |
qcom,pdc-ranges = <0 480 12>, <14 494 24>, <40 520 54>, |
| 3733 |
<94 609 31>, <125 63 1>, <126 716 12>; |
| 3734 |
#interrupt-cells = <2>; |
| 3735 |
interrupt-parent = <&intc>; |
| 3736 |
interrupt-controller; |
| 3737 |
}; |
| 3738 |
|
| 3739 |
tsens0: thermal-sensor@c263000 { |
| 3740 |
compatible = "qcom,sm8450-tsens", "qcom,tsens-v2"; |
| 3741 |
reg = <0 0x0c263000 0 0x1000>, /* TM */ |
| 3742 |
<0 0x0c222000 0 0x1000>; /* SROT */ |
| 3743 |
#qcom,sensors = <16>; |
| 3744 |
interrupts = <GIC_SPI 506 IRQ_TYPE_LEVEL_HIGH>, |
| 3745 |
<GIC_SPI 508 IRQ_TYPE_LEVEL_HIGH>; |
| 3746 |
interrupt-names = "uplow", "critical"; |
| 3747 |
#thermal-sensor-cells = <1>; |
| 3748 |
}; |
| 3749 |
|
| 3750 |
tsens1: thermal-sensor@c265000 { |
| 3751 |
compatible = "qcom,sm8450-tsens", "qcom,tsens-v2"; |
| 3752 |
reg = <0 0x0c265000 0 0x1000>, /* TM */ |
| 3753 |
<0 0x0c223000 0 0x1000>; /* SROT */ |
| 3754 |
#qcom,sensors = <16>; |
| 3755 |
interrupts = <GIC_SPI 507 IRQ_TYPE_LEVEL_HIGH>, |
| 3756 |
<GIC_SPI 509 IRQ_TYPE_LEVEL_HIGH>; |
| 3757 |
interrupt-names = "uplow", "critical"; |
| 3758 |
#thermal-sensor-cells = <1>; |
| 3759 |
}; |
| 3760 |
|
| 3761 |
aoss_qmp: power-management@c300000 { |
| 3762 |
compatible = "qcom,sm8450-aoss-qmp", "qcom,aoss-qmp"; |
| 3763 |
reg = <0 0x0c300000 0 0x400>; |
| 3764 |
interrupts-extended = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_GLINK_QMP |
| 3765 |
IRQ_TYPE_EDGE_RISING>; |
| 3766 |
mboxes = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_GLINK_QMP>; |
| 3767 |
|
| 3768 |
#clock-cells = <0>; |
| 3769 |
}; |
| 3770 |
|
| 3771 |
sram@c3f0000 { |
| 3772 |
compatible = "qcom,rpmh-stats"; |
| 3773 |
reg = <0 0x0c3f0000 0 0x400>; |
| 3774 |
qcom,qmp = <&aoss_qmp>; |
| 3775 |
}; |
| 3776 |
|
| 3777 |
spmi_bus: spmi@c400000 { |
| 3778 |
compatible = "qcom,spmi-pmic-arb"; |
| 3779 |
reg = <0 0x0c400000 0 0x00003000>, |
| 3780 |
<0 0x0c500000 0 0x00400000>, |
| 3781 |
<0 0x0c440000 0 0x00080000>, |
| 3782 |
<0 0x0c4c0000 0 0x00010000>, |
| 3783 |
<0 0x0c42d000 0 0x00010000>; |
| 3784 |
reg-names = "core", |
| 3785 |
"chnls", |
| 3786 |
"obsrvr", |
| 3787 |
"intr", |
| 3788 |
"cnfg"; |
| 3789 |
interrupt-names = "periph_irq"; |
| 3790 |
interrupts-extended = <&pdc 1 IRQ_TYPE_LEVEL_HIGH>; |
| 3791 |
qcom,ee = <0>; |
| 3792 |
qcom,channel = <0>; |
| 3793 |
interrupt-controller; |
| 3794 |
#interrupt-cells = <4>; |
| 3795 |
#address-cells = <2>; |
| 3796 |
#size-cells = <0>; |
| 3797 |
}; |
| 3798 |
|
| 3799 |
ipcc: mailbox@ed18000 { |
| 3800 |
compatible = "qcom,sm8450-ipcc", "qcom,ipcc"; |
| 3801 |
reg = <0 0x0ed18000 0 0x1000>; |
| 3802 |
interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>; |
| 3803 |
interrupt-controller; |
| 3804 |
#interrupt-cells = <3>; |
| 3805 |
#mbox-cells = <2>; |
| 3806 |
}; |
| 3807 |
|
| 3808 |
tlmm: pinctrl@f100000 { |
| 3809 |
compatible = "qcom,sm8450-tlmm"; |
| 3810 |
reg = <0 0x0f100000 0 0x300000>; |
| 3811 |
interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; |
| 3812 |
gpio-controller; |
| 3813 |
#gpio-cells = <2>; |
| 3814 |
interrupt-controller; |
| 3815 |
#interrupt-cells = <2>; |
| 3816 |
gpio-ranges = <&tlmm 0 0 211>; |
| 3817 |
wakeup-parent = <&pdc>; |
| 3818 |
|
| 3819 |
sdc2_default_state: sdc2-default-state { |
| 3820 |
clk-pins { |
| 3821 |
pins = "sdc2_clk"; |
| 3822 |
drive-strength = <16>; |
| 3823 |
bias-disable; |
| 3824 |
}; |
| 3825 |
|
| 3826 |
cmd-pins { |
| 3827 |
pins = "sdc2_cmd"; |
| 3828 |
drive-strength = <16>; |
| 3829 |
bias-pull-up; |
| 3830 |
}; |
| 3831 |
|
| 3832 |
data-pins { |
| 3833 |
pins = "sdc2_data"; |
| 3834 |
drive-strength = <16>; |
| 3835 |
bias-pull-up; |
| 3836 |
}; |
| 3837 |
}; |
| 3838 |
|
| 3839 |
sdc2_sleep_state: sdc2-sleep-state { |
| 3840 |
clk-pins { |
| 3841 |
pins = "sdc2_clk"; |
| 3842 |
drive-strength = <2>; |
| 3843 |
bias-disable; |
| 3844 |
}; |
| 3845 |
|
| 3846 |
cmd-pins { |
| 3847 |
pins = "sdc2_cmd"; |
| 3848 |
drive-strength = <2>; |
| 3849 |
bias-pull-up; |
| 3850 |
}; |
| 3851 |
|
| 3852 |
data-pins { |
| 3853 |
pins = "sdc2_data"; |
| 3854 |
drive-strength = <2>; |
| 3855 |
bias-pull-up; |
| 3856 |
}; |
| 3857 |
}; |
| 3858 |
|
| 3859 |
cci0_default: cci0-default-state { |
| 3860 |
/* SDA, SCL */ |
| 3861 |
pins = "gpio110", "gpio111"; |
| 3862 |
function = "cci_i2c"; |
| 3863 |
drive-strength = <2>; |
| 3864 |
bias-pull-up; |
| 3865 |
}; |
| 3866 |
|
| 3867 |
cci0_sleep: cci0-sleep-state { |
| 3868 |
/* SDA, SCL */ |
| 3869 |
pins = "gpio110", "gpio111"; |
| 3870 |
function = "cci_i2c"; |
| 3871 |
drive-strength = <2>; |
| 3872 |
bias-pull-down; |
| 3873 |
}; |
| 3874 |
|
| 3875 |
cci1_default: cci1-default-state { |
| 3876 |
/* SDA, SCL */ |
| 3877 |
pins = "gpio112", "gpio113"; |
| 3878 |
function = "cci_i2c"; |
| 3879 |
drive-strength = <2>; |
| 3880 |
bias-pull-up; |
| 3881 |
}; |
| 3882 |
|
| 3883 |
cci1_sleep: cci1-sleep-state { |
| 3884 |
/* SDA, SCL */ |
| 3885 |
pins = "gpio112", "gpio113"; |
| 3886 |
function = "cci_i2c"; |
| 3887 |
drive-strength = <2>; |
| 3888 |
bias-pull-down; |
| 3889 |
}; |
| 3890 |
|
| 3891 |
cci2_default: cci2-default-state { |
| 3892 |
/* SDA, SCL */ |
| 3893 |
pins = "gpio114", "gpio115"; |
| 3894 |
function = "cci_i2c"; |
| 3895 |
drive-strength = <2>; |
| 3896 |
bias-pull-up; |
| 3897 |
}; |
| 3898 |
|
| 3899 |
cci2_sleep: cci2-sleep-state { |
| 3900 |
/* SDA, SCL */ |
| 3901 |
pins = "gpio114", "gpio115"; |
| 3902 |
function = "cci_i2c"; |
| 3903 |
drive-strength = <2>; |
| 3904 |
bias-pull-down; |
| 3905 |
}; |
| 3906 |
|
| 3907 |
cci3_default: cci3-default-state { |
| 3908 |
/* SDA, SCL */ |
| 3909 |
pins = "gpio208", "gpio209"; |
| 3910 |
function = "cci_i2c"; |
| 3911 |
drive-strength = <2>; |
| 3912 |
bias-pull-up; |
| 3913 |
}; |
| 3914 |
|
| 3915 |
cci3_sleep: cci3-sleep-state { |
| 3916 |
/* SDA, SCL */ |
| 3917 |
pins = "gpio208", "gpio209"; |
| 3918 |
function = "cci_i2c"; |
| 3919 |
drive-strength = <2>; |
| 3920 |
bias-pull-down; |
| 3921 |
}; |
| 3922 |
|
| 3923 |
pcie0_default_state: pcie0-default-state { |
| 3924 |
perst-pins { |
| 3925 |
pins = "gpio94"; |
| 3926 |
function = "gpio"; |
| 3927 |
drive-strength = <2>; |
| 3928 |
bias-pull-down; |
| 3929 |
}; |
| 3930 |
|
| 3931 |
clkreq-pins { |
| 3932 |
pins = "gpio95"; |
| 3933 |
function = "pcie0_clkreqn"; |
| 3934 |
drive-strength = <2>; |
| 3935 |
bias-pull-up; |
| 3936 |
}; |
| 3937 |
|
| 3938 |
wake-pins { |
| 3939 |
pins = "gpio96"; |
| 3940 |
function = "gpio"; |
| 3941 |
drive-strength = <2>; |
| 3942 |
bias-pull-up; |
| 3943 |
}; |
| 3944 |
}; |
| 3945 |
|
| 3946 |
pcie1_default_state: pcie1-default-state { |
| 3947 |
perst-pins { |
| 3948 |
pins = "gpio97"; |
| 3949 |
function = "gpio"; |
| 3950 |
drive-strength = <2>; |
| 3951 |
bias-pull-down; |
| 3952 |
}; |
| 3953 |
|
| 3954 |
clkreq-pins { |
| 3955 |
pins = "gpio98"; |
| 3956 |
function = "pcie1_clkreqn"; |
| 3957 |
drive-strength = <2>; |
| 3958 |
bias-pull-up; |
| 3959 |
}; |
| 3960 |
|
| 3961 |
wake-pins { |
| 3962 |
pins = "gpio99"; |
| 3963 |
function = "gpio"; |
| 3964 |
drive-strength = <2>; |
| 3965 |
bias-pull-up; |
| 3966 |
}; |
| 3967 |
}; |
| 3968 |
|
| 3969 |
qup_i2c0_data_clk: qup-i2c0-data-clk-state { |
| 3970 |
pins = "gpio0", "gpio1"; |
| 3971 |
function = "qup0"; |
| 3972 |
}; |
| 3973 |
|
| 3974 |
qup_i2c1_data_clk: qup-i2c1-data-clk-state { |
| 3975 |
pins = "gpio4", "gpio5"; |
| 3976 |
function = "qup1"; |
| 3977 |
}; |
| 3978 |
|
| 3979 |
qup_i2c2_data_clk: qup-i2c2-data-clk-state { |
| 3980 |
pins = "gpio8", "gpio9"; |
| 3981 |
function = "qup2"; |
| 3982 |
}; |
| 3983 |
|
| 3984 |
qup_i2c3_data_clk: qup-i2c3-data-clk-state { |
| 3985 |
pins = "gpio12", "gpio13"; |
| 3986 |
function = "qup3"; |
| 3987 |
}; |
| 3988 |
|
| 3989 |
qup_i2c4_data_clk: qup-i2c4-data-clk-state { |
| 3990 |
pins = "gpio16", "gpio17"; |
| 3991 |
function = "qup4"; |
| 3992 |
}; |
| 3993 |
|
| 3994 |
qup_i2c5_data_clk: qup-i2c5-data-clk-state { |
| 3995 |
pins = "gpio206", "gpio207"; |
| 3996 |
function = "qup5"; |
| 3997 |
}; |
| 3998 |
|
| 3999 |
qup_i2c6_data_clk: qup-i2c6-data-clk-state { |
| 4000 |
pins = "gpio20", "gpio21"; |
| 4001 |
function = "qup6"; |
| 4002 |
}; |
| 4003 |
|
| 4004 |
qup_i2c8_data_clk: qup-i2c8-data-clk-state { |
| 4005 |
pins = "gpio28", "gpio29"; |
| 4006 |
function = "qup8"; |
| 4007 |
}; |
| 4008 |
|
| 4009 |
qup_i2c9_data_clk: qup-i2c9-data-clk-state { |
| 4010 |
pins = "gpio32", "gpio33"; |
| 4011 |
function = "qup9"; |
| 4012 |
}; |
| 4013 |
|
| 4014 |
qup_i2c10_data_clk: qup-i2c10-data-clk-state { |
| 4015 |
pins = "gpio36", "gpio37"; |
| 4016 |
function = "qup10"; |
| 4017 |
}; |
| 4018 |
|
| 4019 |
qup_i2c11_data_clk: qup-i2c11-data-clk-state { |
| 4020 |
pins = "gpio40", "gpio41"; |
| 4021 |
function = "qup11"; |
| 4022 |
}; |
| 4023 |
|
| 4024 |
qup_i2c12_data_clk: qup-i2c12-data-clk-state { |
| 4025 |
pins = "gpio44", "gpio45"; |
| 4026 |
function = "qup12"; |
| 4027 |
}; |
| 4028 |
|
| 4029 |
qup_i2c13_data_clk: qup-i2c13-data-clk-state { |
| 4030 |
pins = "gpio48", "gpio49"; |
| 4031 |
function = "qup13"; |
| 4032 |
drive-strength = <2>; |
| 4033 |
bias-pull-up; |
| 4034 |
}; |
| 4035 |
|
| 4036 |
qup_i2c14_data_clk: qup-i2c14-data-clk-state { |
| 4037 |
pins = "gpio52", "gpio53"; |
| 4038 |
function = "qup14"; |
| 4039 |
drive-strength = <2>; |
| 4040 |
bias-pull-up; |
| 4041 |
}; |
| 4042 |
|
| 4043 |
qup_i2c15_data_clk: qup-i2c15-data-clk-state { |
| 4044 |
pins = "gpio56", "gpio57"; |
| 4045 |
function = "qup15"; |
| 4046 |
}; |
| 4047 |
|
| 4048 |
qup_i2c16_data_clk: qup-i2c16-data-clk-state { |
| 4049 |
pins = "gpio60", "gpio61"; |
| 4050 |
function = "qup16"; |
| 4051 |
}; |
| 4052 |
|
| 4053 |
qup_i2c17_data_clk: qup-i2c17-data-clk-state { |
| 4054 |
pins = "gpio64", "gpio65"; |
| 4055 |
function = "qup17"; |
| 4056 |
}; |
| 4057 |
|
| 4058 |
qup_i2c18_data_clk: qup-i2c18-data-clk-state { |
| 4059 |
pins = "gpio68", "gpio69"; |
| 4060 |
function = "qup18"; |
| 4061 |
}; |
| 4062 |
|
| 4063 |
qup_i2c19_data_clk: qup-i2c19-data-clk-state { |
| 4064 |
pins = "gpio72", "gpio73"; |
| 4065 |
function = "qup19"; |
| 4066 |
}; |
| 4067 |
|
| 4068 |
qup_i2c20_data_clk: qup-i2c20-data-clk-state { |
| 4069 |
pins = "gpio76", "gpio77"; |
| 4070 |
function = "qup20"; |
| 4071 |
}; |
| 4072 |
|
| 4073 |
qup_i2c21_data_clk: qup-i2c21-data-clk-state { |
| 4074 |
pins = "gpio80", "gpio81"; |
| 4075 |
function = "qup21"; |
| 4076 |
}; |
| 4077 |
|
| 4078 |
qup_spi0_cs: qup-spi0-cs-state { |
| 4079 |
pins = "gpio3"; |
| 4080 |
function = "qup0"; |
| 4081 |
}; |
| 4082 |
|
| 4083 |
qup_spi0_data_clk: qup-spi0-data-clk-state { |
| 4084 |
pins = "gpio0", "gpio1", "gpio2"; |
| 4085 |
function = "qup0"; |
| 4086 |
}; |
| 4087 |
|
| 4088 |
qup_spi1_cs: qup-spi1-cs-state { |
| 4089 |
pins = "gpio7"; |
| 4090 |
function = "qup1"; |
| 4091 |
}; |
| 4092 |
|
| 4093 |
qup_spi1_data_clk: qup-spi1-data-clk-state { |
| 4094 |
pins = "gpio4", "gpio5", "gpio6"; |
| 4095 |
function = "qup1"; |
| 4096 |
}; |
| 4097 |
|
| 4098 |
qup_spi2_cs: qup-spi2-cs-state { |
| 4099 |
pins = "gpio11"; |
| 4100 |
function = "qup2"; |
| 4101 |
}; |
| 4102 |
|
| 4103 |
qup_spi2_data_clk: qup-spi2-data-clk-state { |
| 4104 |
pins = "gpio8", "gpio9", "gpio10"; |
| 4105 |
function = "qup2"; |
| 4106 |
}; |
| 4107 |
|
| 4108 |
qup_spi3_cs: qup-spi3-cs-state { |
| 4109 |
pins = "gpio15"; |
| 4110 |
function = "qup3"; |
| 4111 |
}; |
| 4112 |
|
| 4113 |
qup_spi3_data_clk: qup-spi3-data-clk-state { |
| 4114 |
pins = "gpio12", "gpio13", "gpio14"; |
| 4115 |
function = "qup3"; |
| 4116 |
}; |
| 4117 |
|
| 4118 |
qup_spi4_cs: qup-spi4-cs-state { |
| 4119 |
pins = "gpio19"; |
| 4120 |
function = "qup4"; |
| 4121 |
drive-strength = <6>; |
| 4122 |
bias-disable; |
| 4123 |
}; |
| 4124 |
|
| 4125 |
qup_spi4_data_clk: qup-spi4-data-clk-state { |
| 4126 |
pins = "gpio16", "gpio17", "gpio18"; |
| 4127 |
function = "qup4"; |
| 4128 |
}; |
| 4129 |
|
| 4130 |
qup_spi5_cs: qup-spi5-cs-state { |
| 4131 |
pins = "gpio85"; |
| 4132 |
function = "qup5"; |
| 4133 |
}; |
| 4134 |
|
| 4135 |
qup_spi5_data_clk: qup-spi5-data-clk-state { |
| 4136 |
pins = "gpio206", "gpio207", "gpio84"; |
| 4137 |
function = "qup5"; |
| 4138 |
}; |
| 4139 |
|
| 4140 |
qup_spi6_cs: qup-spi6-cs-state { |
| 4141 |
pins = "gpio23"; |
| 4142 |
function = "qup6"; |
| 4143 |
}; |
| 4144 |
|
| 4145 |
qup_spi6_data_clk: qup-spi6-data-clk-state { |
| 4146 |
pins = "gpio20", "gpio21", "gpio22"; |
| 4147 |
function = "qup6"; |
| 4148 |
}; |
| 4149 |
|
| 4150 |
qup_spi8_cs: qup-spi8-cs-state { |
| 4151 |
pins = "gpio31"; |
| 4152 |
function = "qup8"; |
| 4153 |
}; |
| 4154 |
|
| 4155 |
qup_spi8_data_clk: qup-spi8-data-clk-state { |
| 4156 |
pins = "gpio28", "gpio29", "gpio30"; |
| 4157 |
function = "qup8"; |
| 4158 |
}; |
| 4159 |
|
| 4160 |
qup_spi9_cs: qup-spi9-cs-state { |
| 4161 |
pins = "gpio35"; |
| 4162 |
function = "qup9"; |
| 4163 |
}; |
| 4164 |
|
| 4165 |
qup_spi9_data_clk: qup-spi9-data-clk-state { |
| 4166 |
pins = "gpio32", "gpio33", "gpio34"; |
| 4167 |
function = "qup9"; |
| 4168 |
}; |
| 4169 |
|
| 4170 |
qup_spi10_cs: qup-spi10-cs-state { |
| 4171 |
pins = "gpio39"; |
| 4172 |
function = "qup10"; |
| 4173 |
}; |
| 4174 |
|
| 4175 |
qup_spi10_data_clk: qup-spi10-data-clk-state { |
| 4176 |
pins = "gpio36", "gpio37", "gpio38"; |
| 4177 |
function = "qup10"; |
| 4178 |
}; |
| 4179 |
|
| 4180 |
qup_spi11_cs: qup-spi11-cs-state { |
| 4181 |
pins = "gpio43"; |
| 4182 |
function = "qup11"; |
| 4183 |
}; |
| 4184 |
|
| 4185 |
qup_spi11_data_clk: qup-spi11-data-clk-state { |
| 4186 |
pins = "gpio40", "gpio41", "gpio42"; |
| 4187 |
function = "qup11"; |
| 4188 |
}; |
| 4189 |
|
| 4190 |
qup_spi12_cs: qup-spi12-cs-state { |
| 4191 |
pins = "gpio47"; |
| 4192 |
function = "qup12"; |
| 4193 |
}; |
| 4194 |
|
| 4195 |
qup_spi12_data_clk: qup-spi12-data-clk-state { |
| 4196 |
pins = "gpio44", "gpio45", "gpio46"; |
| 4197 |
function = "qup12"; |
| 4198 |
}; |
| 4199 |
|
| 4200 |
qup_spi13_cs: qup-spi13-cs-state { |
| 4201 |
pins = "gpio51"; |
| 4202 |
function = "qup13"; |
| 4203 |
}; |
| 4204 |
|
| 4205 |
qup_spi13_data_clk: qup-spi13-data-clk-state { |
| 4206 |
pins = "gpio48", "gpio49", "gpio50"; |
| 4207 |
function = "qup13"; |
| 4208 |
}; |
| 4209 |
|
| 4210 |
qup_spi14_cs: qup-spi14-cs-state { |
| 4211 |
pins = "gpio55"; |
| 4212 |
function = "qup14"; |
| 4213 |
}; |
| 4214 |
|
| 4215 |
qup_spi14_data_clk: qup-spi14-data-clk-state { |
| 4216 |
pins = "gpio52", "gpio53", "gpio54"; |
| 4217 |
function = "qup14"; |
| 4218 |
}; |
| 4219 |
|
| 4220 |
qup_spi15_cs: qup-spi15-cs-state { |
| 4221 |
pins = "gpio59"; |
| 4222 |
function = "qup15"; |
| 4223 |
}; |
| 4224 |
|
| 4225 |
qup_spi15_data_clk: qup-spi15-data-clk-state { |
| 4226 |
pins = "gpio56", "gpio57", "gpio58"; |
| 4227 |
function = "qup15"; |
| 4228 |
}; |
| 4229 |
|
| 4230 |
qup_spi16_cs: qup-spi16-cs-state { |
| 4231 |
pins = "gpio63"; |
| 4232 |
function = "qup16"; |
| 4233 |
}; |
| 4234 |
|
| 4235 |
qup_spi16_data_clk: qup-spi16-data-clk-state { |
| 4236 |
pins = "gpio60", "gpio61", "gpio62"; |
| 4237 |
function = "qup16"; |
| 4238 |
}; |
| 4239 |
|
| 4240 |
qup_spi17_cs: qup-spi17-cs-state { |
| 4241 |
pins = "gpio67"; |
| 4242 |
function = "qup17"; |
| 4243 |
}; |
| 4244 |
|
| 4245 |
qup_spi17_data_clk: qup-spi17-data-clk-state { |
| 4246 |
pins = "gpio64", "gpio65", "gpio66"; |
| 4247 |
function = "qup17"; |
| 4248 |
}; |
| 4249 |
|
| 4250 |
qup_spi18_cs: qup-spi18-cs-state { |
| 4251 |
pins = "gpio71"; |
| 4252 |
function = "qup18"; |
| 4253 |
drive-strength = <6>; |
| 4254 |
bias-disable; |
| 4255 |
}; |
| 4256 |
|
| 4257 |
qup_spi18_data_clk: qup-spi18-data-clk-state { |
| 4258 |
pins = "gpio68", "gpio69", "gpio70"; |
| 4259 |
function = "qup18"; |
| 4260 |
drive-strength = <6>; |
| 4261 |
bias-disable; |
| 4262 |
}; |
| 4263 |
|
| 4264 |
qup_spi19_cs: qup-spi19-cs-state { |
| 4265 |
pins = "gpio75"; |
| 4266 |
function = "qup19"; |
| 4267 |
drive-strength = <6>; |
| 4268 |
bias-disable; |
| 4269 |
}; |
| 4270 |
|
| 4271 |
qup_spi19_data_clk: qup-spi19-data-clk-state { |
| 4272 |
pins = "gpio72", "gpio73", "gpio74"; |
| 4273 |
function = "qup19"; |
| 4274 |
drive-strength = <6>; |
| 4275 |
bias-disable; |
| 4276 |
}; |
| 4277 |
|
| 4278 |
qup_spi20_cs: qup-spi20-cs-state { |
| 4279 |
pins = "gpio79"; |
| 4280 |
function = "qup20"; |
| 4281 |
}; |
| 4282 |
|
| 4283 |
qup_spi20_data_clk: qup-spi20-data-clk-state { |
| 4284 |
pins = "gpio76", "gpio77", "gpio78"; |
| 4285 |
function = "qup20"; |
| 4286 |
}; |
| 4287 |
|
| 4288 |
qup_spi21_cs: qup-spi21-cs-state { |
| 4289 |
pins = "gpio83"; |
| 4290 |
function = "qup21"; |
| 4291 |
}; |
| 4292 |
|
| 4293 |
qup_spi21_data_clk: qup-spi21-data-clk-state { |
| 4294 |
pins = "gpio80", "gpio81", "gpio82"; |
| 4295 |
function = "qup21"; |
| 4296 |
}; |
| 4297 |
|
| 4298 |
qup_uart7_rx: qup-uart7-rx-state { |
| 4299 |
pins = "gpio26"; |
| 4300 |
function = "qup7"; |
| 4301 |
drive-strength = <2>; |
| 4302 |
bias-disable; |
| 4303 |
}; |
| 4304 |
|
| 4305 |
qup_uart7_tx: qup-uart7-tx-state { |
| 4306 |
pins = "gpio27"; |
| 4307 |
function = "qup7"; |
| 4308 |
drive-strength = <2>; |
| 4309 |
bias-disable; |
| 4310 |
}; |
| 4311 |
|
| 4312 |
qup_uart20_default: qup-uart20-default-state { |
| 4313 |
pins = "gpio76", "gpio77", "gpio78", "gpio79"; |
| 4314 |
function = "qup20"; |
| 4315 |
}; |
| 4316 |
}; |
| 4317 |
|
| 4318 |
lpass_tlmm: pinctrl@3440000 { |
| 4319 |
compatible = "qcom,sm8450-lpass-lpi-pinctrl"; |
| 4320 |
reg = <0 0x03440000 0x0 0x20000>, |
| 4321 |
<0 0x034d0000 0x0 0x10000>; |
| 4322 |
gpio-controller; |
| 4323 |
#gpio-cells = <2>; |
| 4324 |
gpio-ranges = <&lpass_tlmm 0 0 23>; |
| 4325 |
|
| 4326 |
clocks = <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, |
| 4327 |
<&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>; |
| 4328 |
clock-names = "core", "audio"; |
| 4329 |
|
| 4330 |
tx_swr_active: tx-swr-active-state { |
| 4331 |
clk-pins { |
| 4332 |
pins = "gpio0"; |
| 4333 |
function = "swr_tx_clk"; |
| 4334 |
drive-strength = <2>; |
| 4335 |
slew-rate = <1>; |
| 4336 |
bias-disable; |
| 4337 |
}; |
| 4338 |
|
| 4339 |
data-pins { |
| 4340 |
pins = "gpio1", "gpio2", "gpio14"; |
| 4341 |
function = "swr_tx_data"; |
| 4342 |
drive-strength = <2>; |
| 4343 |
slew-rate = <1>; |
| 4344 |
bias-bus-hold; |
| 4345 |
}; |
| 4346 |
}; |
| 4347 |
|
| 4348 |
rx_swr_active: rx-swr-active-state { |
| 4349 |
clk-pins { |
| 4350 |
pins = "gpio3"; |
| 4351 |
function = "swr_rx_clk"; |
| 4352 |
drive-strength = <2>; |
| 4353 |
slew-rate = <1>; |
| 4354 |
bias-disable; |
| 4355 |
}; |
| 4356 |
|
| 4357 |
data-pins { |
| 4358 |
pins = "gpio4", "gpio5"; |
| 4359 |
function = "swr_rx_data"; |
| 4360 |
drive-strength = <2>; |
| 4361 |
slew-rate = <1>; |
| 4362 |
bias-bus-hold; |
| 4363 |
}; |
| 4364 |
}; |
| 4365 |
|
| 4366 |
dmic01_default: dmic01-default-state { |
| 4367 |
clk-pins { |
| 4368 |
pins = "gpio6"; |
| 4369 |
function = "dmic1_clk"; |
| 4370 |
drive-strength = <8>; |
| 4371 |
output-high; |
| 4372 |
}; |
| 4373 |
|
| 4374 |
data-pins { |
| 4375 |
pins = "gpio7"; |
| 4376 |
function = "dmic1_data"; |
| 4377 |
drive-strength = <8>; |
| 4378 |
}; |
| 4379 |
}; |
| 4380 |
|
| 4381 |
dmic23_default: dmic23-default-state { |
| 4382 |
clk-pins { |
| 4383 |
pins = "gpio8"; |
| 4384 |
function = "dmic2_clk"; |
| 4385 |
drive-strength = <8>; |
| 4386 |
output-high; |
| 4387 |
}; |
| 4388 |
|
| 4389 |
data-pins { |
| 4390 |
pins = "gpio9"; |
| 4391 |
function = "dmic2_data"; |
| 4392 |
drive-strength = <8>; |
| 4393 |
}; |
| 4394 |
}; |
| 4395 |
|
| 4396 |
wsa_swr_active: wsa-swr-active-state { |
| 4397 |
clk-pins { |
| 4398 |
pins = "gpio10"; |
| 4399 |
function = "wsa_swr_clk"; |
| 4400 |
drive-strength = <2>; |
| 4401 |
slew-rate = <1>; |
| 4402 |
bias-disable; |
| 4403 |
}; |
| 4404 |
|
| 4405 |
data-pins { |
| 4406 |
pins = "gpio11"; |
| 4407 |
function = "wsa_swr_data"; |
| 4408 |
drive-strength = <2>; |
| 4409 |
slew-rate = <1>; |
| 4410 |
bias-bus-hold; |
| 4411 |
}; |
| 4412 |
}; |
| 4413 |
|
| 4414 |
wsa2_swr_active: wsa2-swr-active-state { |
| 4415 |
clk-pins { |
| 4416 |
pins = "gpio15"; |
| 4417 |
function = "wsa2_swr_clk"; |
| 4418 |
drive-strength = <2>; |
| 4419 |
slew-rate = <1>; |
| 4420 |
bias-disable; |
| 4421 |
}; |
| 4422 |
|
| 4423 |
data-pins { |
| 4424 |
pins = "gpio16"; |
| 4425 |
function = "wsa2_swr_data"; |
| 4426 |
drive-strength = <2>; |
| 4427 |
slew-rate = <1>; |
| 4428 |
bias-bus-hold; |
| 4429 |
}; |
| 4430 |
}; |
| 4431 |
}; |
| 4432 |
|
| 4433 |
stm@10002000 { |
| 4434 |
compatible = "arm,coresight-stm", "arm,primecell"; |
| 4435 |
reg = <0x0 0x10002000 0x0 0x1000>, |
| 4436 |
<0x0 0x16280000 0x0 0x180000>; |
| 4437 |
reg-names = "stm-base", "stm-stimulus-base"; |
| 4438 |
|
| 4439 |
clocks = <&aoss_qmp>; |
| 4440 |
clock-names = "apb_pclk"; |
| 4441 |
|
| 4442 |
out-ports { |
| 4443 |
port { |
| 4444 |
stm_out_funnel_in0: endpoint { |
| 4445 |
remote-endpoint = |
| 4446 |
<&funnel_in0_in_stm>; |
| 4447 |
}; |
| 4448 |
}; |
| 4449 |
}; |
| 4450 |
}; |
| 4451 |
|
| 4452 |
funnel@10041000 { |
| 4453 |
compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; |
| 4454 |
reg = <0x0 0x10041000 0x0 0x1000>; |
| 4455 |
|
| 4456 |
clocks = <&aoss_qmp>; |
| 4457 |
clock-names = "apb_pclk"; |
| 4458 |
|
| 4459 |
in-ports { |
| 4460 |
#address-cells = <1>; |
| 4461 |
#size-cells = <0>; |
| 4462 |
|
| 4463 |
port@7 { |
| 4464 |
reg = <7>; |
| 4465 |
funnel_in0_in_stm: endpoint { |
| 4466 |
remote-endpoint = |
| 4467 |
<&stm_out_funnel_in0>; |
| 4468 |
}; |
| 4469 |
}; |
| 4470 |
}; |
| 4471 |
|
| 4472 |
out-ports { |
| 4473 |
port { |
| 4474 |
funnel_in0_out_funnel_qdss: endpoint { |
| 4475 |
remote-endpoint = |
| 4476 |
<&funnel_qdss_in_funnel_in0>; |
| 4477 |
}; |
| 4478 |
}; |
| 4479 |
}; |
| 4480 |
}; |
| 4481 |
|
| 4482 |
funnel@10042000 { |
| 4483 |
compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; |
| 4484 |
|
| 4485 |
reg = <0x0 0x10042000 0x0 0x1000>; |
| 4486 |
|
| 4487 |
clocks = <&aoss_qmp>; |
| 4488 |
clock-names = "apb_pclk"; |
| 4489 |
|
| 4490 |
in-ports { |
| 4491 |
#address-cells = <1>; |
| 4492 |
#size-cells = <0>; |
| 4493 |
|
| 4494 |
port@4 { |
| 4495 |
reg = <4>; |
| 4496 |
funnel_in1_in_funnel_apss: endpoint { |
| 4497 |
remote-endpoint = |
| 4498 |
<&funnel_apss_out_funnel_in1>; |
| 4499 |
}; |
| 4500 |
}; |
| 4501 |
|
| 4502 |
port@6 { |
| 4503 |
reg = <6>; |
| 4504 |
funnel_in1_in_funnel_dl_center: endpoint { |
| 4505 |
remote-endpoint = |
| 4506 |
<&funnel_dl_center_out_funnel_in1>; |
| 4507 |
}; |
| 4508 |
}; |
| 4509 |
}; |
| 4510 |
|
| 4511 |
out-ports { |
| 4512 |
port { |
| 4513 |
funnel_in1_out_funnel_qdss: endpoint { |
| 4514 |
remote-endpoint = |
| 4515 |
<&funnel_qdss_in_funnel_in1>; |
| 4516 |
}; |
| 4517 |
}; |
| 4518 |
}; |
| 4519 |
}; |
| 4520 |
|
| 4521 |
funnel@10045000 { |
| 4522 |
compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; |
| 4523 |
reg = <0x0 0x10045000 0x0 0x1000>; |
| 4524 |
|
| 4525 |
clocks = <&aoss_qmp>; |
| 4526 |
clock-names = "apb_pclk"; |
| 4527 |
|
| 4528 |
in-ports { |
| 4529 |
#address-cells = <1>; |
| 4530 |
#size-cells = <0>; |
| 4531 |
|
| 4532 |
port@0 { |
| 4533 |
reg = <0>; |
| 4534 |
funnel_qdss_in_funnel_in0: endpoint { |
| 4535 |
remote-endpoint = |
| 4536 |
<&funnel_in0_out_funnel_qdss>; |
| 4537 |
}; |
| 4538 |
}; |
| 4539 |
|
| 4540 |
port@1 { |
| 4541 |
reg = <1>; |
| 4542 |
funnel_qdss_in_funnel_in1: endpoint { |
| 4543 |
remote-endpoint = |
| 4544 |
<&funnel_in1_out_funnel_qdss>; |
| 4545 |
}; |
| 4546 |
}; |
| 4547 |
}; |
| 4548 |
|
| 4549 |
out-ports { |
| 4550 |
port { |
| 4551 |
funnel_qdss_out_funnel_aoss: endpoint { |
| 4552 |
remote-endpoint = |
| 4553 |
<&funnel_aoss_in_funnel_qdss>; |
| 4554 |
}; |
| 4555 |
}; |
| 4556 |
}; |
| 4557 |
}; |
| 4558 |
|
| 4559 |
replicator@10046000 { |
| 4560 |
compatible = "arm,coresight-dynamic-replicator", "arm,primecell"; |
| 4561 |
reg = <0x0 0x10046000 0x0 0x1000>; |
| 4562 |
|
| 4563 |
clocks = <&aoss_qmp>; |
| 4564 |
clock-names = "apb_pclk"; |
| 4565 |
|
| 4566 |
in-ports { |
| 4567 |
port { |
| 4568 |
replicator_qdss_in_replicator_swao: endpoint { |
| 4569 |
remote-endpoint = |
| 4570 |
<&replicator_swao_out_replicator_qdss>; |
| 4571 |
}; |
| 4572 |
}; |
| 4573 |
}; |
| 4574 |
|
| 4575 |
out-ports { |
| 4576 |
|
| 4577 |
port { |
| 4578 |
replicator_qdss_out_replicator_etr: endpoint { |
| 4579 |
remote-endpoint = |
| 4580 |
<&replicator_etr_in_replicator_qdss>; |
| 4581 |
}; |
| 4582 |
}; |
| 4583 |
}; |
| 4584 |
}; |
| 4585 |
|
| 4586 |
tmc_etr: tmc@10048000 { |
| 4587 |
compatible = "arm,coresight-tmc", "arm,primecell"; |
| 4588 |
reg = <0x0 0x10048000 0x0 0x1000>; |
| 4589 |
|
| 4590 |
iommus = <&apps_smmu 0x0600 0>; |
| 4591 |
arm,buffer-size = <0x10000>; |
| 4592 |
|
| 4593 |
arm,scatter-gather; |
| 4594 |
clocks = <&aoss_qmp>; |
| 4595 |
clock-names = "apb_pclk"; |
| 4596 |
|
| 4597 |
in-ports { |
| 4598 |
port { |
| 4599 |
tmc_etr_in_replicator_etr: endpoint { |
| 4600 |
remote-endpoint = |
| 4601 |
<&replicator_etr_out_tmc_etr>; |
| 4602 |
}; |
| 4603 |
}; |
| 4604 |
}; |
| 4605 |
}; |
| 4606 |
|
| 4607 |
replicator@1004e000 { |
| 4608 |
compatible = "arm,coresight-dynamic-replicator", "arm,primecell"; |
| 4609 |
reg = <0x0 0x1004e000 0x0 0x1000>; |
| 4610 |
|
| 4611 |
clocks = <&aoss_qmp>; |
| 4612 |
clock-names = "apb_pclk"; |
| 4613 |
|
| 4614 |
in-ports { |
| 4615 |
port { |
| 4616 |
replicator_etr_in_replicator_qdss: endpoint { |
| 4617 |
remote-endpoint = |
| 4618 |
<&replicator_qdss_out_replicator_etr>; |
| 4619 |
}; |
| 4620 |
}; |
| 4621 |
}; |
| 4622 |
|
| 4623 |
out-ports { |
| 4624 |
|
| 4625 |
port { |
| 4626 |
|
| 4627 |
replicator_etr_out_tmc_etr: endpoint { |
| 4628 |
remote-endpoint = |
| 4629 |
<&tmc_etr_in_replicator_etr>; |
| 4630 |
}; |
| 4631 |
}; |
| 4632 |
}; |
| 4633 |
}; |
| 4634 |
|
| 4635 |
funnel@10b04000 { |
| 4636 |
compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; |
| 4637 |
|
| 4638 |
reg = <0x0 0x10b04000 0x0 0x1000>; |
| 4639 |
|
| 4640 |
clocks = <&aoss_qmp>; |
| 4641 |
clock-names = "apb_pclk"; |
| 4642 |
|
| 4643 |
in-ports { |
| 4644 |
#address-cells = <1>; |
| 4645 |
#size-cells = <0>; |
| 4646 |
|
| 4647 |
port@6 { |
| 4648 |
reg = <6>; |
| 4649 |
funnel_aoss_in_tpda_aoss: endpoint { |
| 4650 |
remote-endpoint = |
| 4651 |
<&tpda_aoss_out_funnel_aoss>; |
| 4652 |
}; |
| 4653 |
}; |
| 4654 |
|
| 4655 |
port@7 { |
| 4656 |
reg = <7>; |
| 4657 |
funnel_aoss_in_funnel_qdss: endpoint { |
| 4658 |
remote-endpoint = |
| 4659 |
<&funnel_qdss_out_funnel_aoss>; |
| 4660 |
}; |
| 4661 |
}; |
| 4662 |
}; |
| 4663 |
|
| 4664 |
out-ports { |
| 4665 |
port { |
| 4666 |
funnel_aoss_out_tmc_etf: endpoint { |
| 4667 |
remote-endpoint = |
| 4668 |
<&tmc_etf_in_funnel_aoss>; |
| 4669 |
}; |
| 4670 |
}; |
| 4671 |
}; |
| 4672 |
}; |
| 4673 |
|
| 4674 |
tmc@10b05000 { |
| 4675 |
compatible = "arm,coresight-tmc", "arm,primecell"; |
| 4676 |
reg = <0x0 0x10b05000 0x0 0x1000>; |
| 4677 |
|
| 4678 |
clocks = <&aoss_qmp>; |
| 4679 |
clock-names = "apb_pclk"; |
| 4680 |
|
| 4681 |
in-ports { |
| 4682 |
port { |
| 4683 |
tmc_etf_in_funnel_aoss: endpoint { |
| 4684 |
remote-endpoint = |
| 4685 |
<&funnel_aoss_out_tmc_etf>; |
| 4686 |
}; |
| 4687 |
}; |
| 4688 |
}; |
| 4689 |
|
| 4690 |
out-ports { |
| 4691 |
port { |
| 4692 |
tmc_etf_out_replicator_swao: endpoint { |
| 4693 |
remote-endpoint = |
| 4694 |
<&replicator_swao_in_tmc_etf>; |
| 4695 |
}; |
| 4696 |
}; |
| 4697 |
}; |
| 4698 |
}; |
| 4699 |
|
| 4700 |
replicator@10b06000 { |
| 4701 |
compatible = "arm,coresight-dynamic-replicator", "arm,primecell"; |
| 4702 |
reg = <0x0 0x10b06000 0x0 0x1000>; |
| 4703 |
|
| 4704 |
qcom,replicator-loses-context; |
| 4705 |
clocks = <&aoss_qmp>; |
| 4706 |
clock-names = "apb_pclk"; |
| 4707 |
|
| 4708 |
in-ports { |
| 4709 |
port { |
| 4710 |
replicator_swao_in_tmc_etf: endpoint { |
| 4711 |
remote-endpoint = |
| 4712 |
<&tmc_etf_out_replicator_swao>; |
| 4713 |
}; |
| 4714 |
}; |
| 4715 |
}; |
| 4716 |
|
| 4717 |
out-ports { |
| 4718 |
|
| 4719 |
port { |
| 4720 |
replicator_swao_out_replicator_qdss: endpoint { |
| 4721 |
remote-endpoint = |
| 4722 |
<&replicator_qdss_in_replicator_swao>; |
| 4723 |
}; |
| 4724 |
}; |
| 4725 |
}; |
| 4726 |
}; |
| 4727 |
|
| 4728 |
tpda@10b08000 { |
| 4729 |
compatible = "qcom,coresight-tpda", "arm,primecell"; |
| 4730 |
|
| 4731 |
reg = <0x0 0x10b08000 0x0 0x1000>; |
| 4732 |
|
| 4733 |
clocks = <&aoss_qmp>; |
| 4734 |
clock-names = "apb_pclk"; |
| 4735 |
|
| 4736 |
in-ports { |
| 4737 |
|
| 4738 |
#address-cells = <1>; |
| 4739 |
#size-cells = <0>; |
| 4740 |
|
| 4741 |
port@0 { |
| 4742 |
reg = <0>; |
| 4743 |
tpda_aoss_in_tpdm_swao_prio_0: endpoint { |
| 4744 |
remote-endpoint = |
| 4745 |
<&tpdm_swao_prio_0_out_tpda_aoss>; |
| 4746 |
}; |
| 4747 |
}; |
| 4748 |
|
| 4749 |
port@4 { |
| 4750 |
reg = <4>; |
| 4751 |
tpda_aoss_in_tpdm_swao: endpoint { |
| 4752 |
remote-endpoint = |
| 4753 |
<&tpdm_swao_out_tpda_aoss>; |
| 4754 |
}; |
| 4755 |
}; |
| 4756 |
}; |
| 4757 |
|
| 4758 |
out-ports { |
| 4759 |
|
| 4760 |
port { |
| 4761 |
tpda_aoss_out_funnel_aoss: endpoint { |
| 4762 |
remote-endpoint = |
| 4763 |
<&funnel_aoss_in_tpda_aoss>; |
| 4764 |
}; |
| 4765 |
}; |
| 4766 |
}; |
| 4767 |
}; |
| 4768 |
|
| 4769 |
tpdm@10b09000 { |
| 4770 |
compatible = "qcom,coresight-tpdm", "arm,primecell"; |
| 4771 |
reg = <0x0 0x10b09000 0x0 0x1000>; |
| 4772 |
|
| 4773 |
|
| 4774 |
clocks = <&aoss_qmp>; |
| 4775 |
clock-names = "apb_pclk"; |
| 4776 |
|
| 4777 |
out-ports { |
| 4778 |
port { |
| 4779 |
tpdm_swao_prio_0_out_tpda_aoss: endpoint { |
| 4780 |
remote-endpoint = |
| 4781 |
<&tpda_aoss_in_tpdm_swao_prio_0>; |
| 4782 |
}; |
| 4783 |
}; |
| 4784 |
}; |
| 4785 |
}; |
| 4786 |
|
| 4787 |
tpdm@10b0d000 { |
| 4788 |
compatible = "qcom,coresight-tpdm", "arm,primecell"; |
| 4789 |
reg = <0x0 0x10b0d000 0x0 0x1000>; |
| 4790 |
|
| 4791 |
clocks = <&aoss_qmp>; |
| 4792 |
clock-names = "apb_pclk"; |
| 4793 |
|
| 4794 |
out-ports { |
| 4795 |
port { |
| 4796 |
tpdm_swao_out_tpda_aoss: endpoint { |
| 4797 |
remote-endpoint = |
| 4798 |
<&tpda_aoss_in_tpdm_swao>; |
| 4799 |
}; |
| 4800 |
}; |
| 4801 |
}; |
| 4802 |
}; |
| 4803 |
|
| 4804 |
tpdm@10c28000 { |
| 4805 |
compatible = "qcom,coresight-tpdm", "arm,primecell"; |
| 4806 |
reg = <0x0 0x10c28000 0x0 0x1000>; |
| 4807 |
|
| 4808 |
clocks = <&aoss_qmp>; |
| 4809 |
clock-names = "apb_pclk"; |
| 4810 |
|
| 4811 |
out-ports { |
| 4812 |
port { |
| 4813 |
tpdm_dlct_out_tpda_dl_center_26: endpoint { |
| 4814 |
remote-endpoint = |
| 4815 |
<&tpda_dl_center_26_in_tpdm_dlct>; |
| 4816 |
}; |
| 4817 |
}; |
| 4818 |
}; |
| 4819 |
}; |
| 4820 |
|
| 4821 |
tpdm@10c29000 { |
| 4822 |
compatible = "qcom,coresight-tpdm", "arm,primecell"; |
| 4823 |
reg = <0x0 0x10c29000 0x0 0x1000>; |
| 4824 |
|
| 4825 |
clocks = <&aoss_qmp>; |
| 4826 |
clock-names = "apb_pclk"; |
| 4827 |
|
| 4828 |
out-ports { |
| 4829 |
port { |
| 4830 |
tpdm_ipcc_out_tpda_dl_center_27: endpoint { |
| 4831 |
remote-endpoint = |
| 4832 |
<&tpda_dl_center_27_in_tpdm_ipcc>; |
| 4833 |
}; |
| 4834 |
}; |
| 4835 |
}; |
| 4836 |
}; |
| 4837 |
|
| 4838 |
cti@10c2a000 { |
| 4839 |
compatible = "arm,coresight-cti", "arm,primecell"; |
| 4840 |
reg = <0x0 0x10c2a000 0x0 0x1000>; |
| 4841 |
|
| 4842 |
clocks = <&aoss_qmp>; |
| 4843 |
clock-names = "apb_pclk"; |
| 4844 |
}; |
| 4845 |
|
| 4846 |
cti@10c2b000 { |
| 4847 |
compatible = "arm,coresight-cti", "arm,primecell"; |
| 4848 |
reg = <0x0 0x10c2b000 0x0 0x1000>; |
| 4849 |
|
| 4850 |
clocks = <&aoss_qmp>; |
| 4851 |
clock-names = "apb_pclk"; |
| 4852 |
}; |
| 4853 |
|
| 4854 |
tpda@10c2e000 { |
| 4855 |
compatible = "qcom,coresight-tpda", "arm,primecell"; |
| 4856 |
reg = <0x0 0x10c2e000 0x0 0x1000>; |
| 4857 |
|
| 4858 |
clocks = <&aoss_qmp>; |
| 4859 |
clock-names = "apb_pclk"; |
| 4860 |
|
| 4861 |
in-ports { |
| 4862 |
|
| 4863 |
#address-cells = <1>; |
| 4864 |
#size-cells = <0>; |
| 4865 |
|
| 4866 |
port@1a { |
| 4867 |
reg = <26>; |
| 4868 |
tpda_dl_center_26_in_tpdm_dlct: endpoint { |
| 4869 |
remote-endpoint = |
| 4870 |
<&tpdm_dlct_out_tpda_dl_center_26>; |
| 4871 |
}; |
| 4872 |
}; |
| 4873 |
|
| 4874 |
port@1b { |
| 4875 |
reg = <27>; |
| 4876 |
tpda_dl_center_27_in_tpdm_ipcc: endpoint { |
| 4877 |
remote-endpoint = |
| 4878 |
<&tpdm_ipcc_out_tpda_dl_center_27>; |
| 4879 |
}; |
| 4880 |
}; |
| 4881 |
}; |
| 4882 |
|
| 4883 |
out-ports { |
| 4884 |
|
| 4885 |
port { |
| 4886 |
tpda_dl_center_out_funnel_dl_center: endpoint { |
| 4887 |
remote-endpoint = |
| 4888 |
<&funnel_dl_center_in_tpda_dl_center>; |
| 4889 |
}; |
| 4890 |
}; |
| 4891 |
}; |
| 4892 |
}; |
| 4893 |
|
| 4894 |
funnel@10c2f000 { |
| 4895 |
compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; |
| 4896 |
reg = <0x0 0x10c2f000 0x0 0x1000>; |
| 4897 |
|
| 4898 |
clocks = <&aoss_qmp>; |
| 4899 |
clock-names = "apb_pclk"; |
| 4900 |
|
| 4901 |
in-ports { |
| 4902 |
|
| 4903 |
port { |
| 4904 |
funnel_dl_center_in_tpda_dl_center: endpoint { |
| 4905 |
remote-endpoint = |
| 4906 |
<&tpda_dl_center_out_funnel_dl_center>; |
| 4907 |
}; |
| 4908 |
}; |
| 4909 |
}; |
| 4910 |
|
| 4911 |
out-ports { |
| 4912 |
port { |
| 4913 |
funnel_dl_center_out_funnel_in1: endpoint { |
| 4914 |
remote-endpoint = |
| 4915 |
<&funnel_in1_in_funnel_dl_center>; |
| 4916 |
}; |
| 4917 |
}; |
| 4918 |
}; |
| 4919 |
}; |
| 4920 |
|
| 4921 |
funnel@13810000 { |
| 4922 |
compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; |
| 4923 |
|
| 4924 |
reg = <0x0 0x13810000 0x0 0x1000>; |
| 4925 |
|
| 4926 |
clocks = <&aoss_qmp>; |
| 4927 |
clock-names = "apb_pclk"; |
| 4928 |
|
| 4929 |
in-ports { |
| 4930 |
|
| 4931 |
port { |
| 4932 |
funnel_apss_in_funnel_ete: endpoint { |
| 4933 |
remote-endpoint = |
| 4934 |
<&funnel_ete_out_funnel_apss>; |
| 4935 |
}; |
| 4936 |
}; |
| 4937 |
}; |
| 4938 |
|
| 4939 |
out-ports { |
| 4940 |
port { |
| 4941 |
funnel_apss_out_funnel_in1: endpoint { |
| 4942 |
remote-endpoint = |
| 4943 |
<&funnel_in1_in_funnel_apss>; |
| 4944 |
}; |
| 4945 |
}; |
| 4946 |
}; |
| 4947 |
}; |
| 4948 |
|
| 4949 |
cti@138e0000 { |
| 4950 |
compatible = "arm,coresight-cti", "arm,primecell"; |
| 4951 |
reg = <0x0 0x138e0000 0x0 0x1000>; |
| 4952 |
|
| 4953 |
clocks = <&aoss_qmp>; |
| 4954 |
clock-names = "apb_pclk"; |
| 4955 |
}; |
| 4956 |
|
| 4957 |
cti@138f0000 { |
| 4958 |
compatible = "arm,coresight-cti", "arm,primecell"; |
| 4959 |
reg = <0x0 0x138f0000 0x0 0x1000>; |
| 4960 |
|
| 4961 |
clocks = <&aoss_qmp>; |
| 4962 |
clock-names = "apb_pclk"; |
| 4963 |
}; |
| 4964 |
|
| 4965 |
cti@13900000 { |
| 4966 |
compatible = "arm,coresight-cti", "arm,primecell"; |
| 4967 |
reg = <0x0 0x13900000 0x0 0x1000>; |
| 4968 |
|
| 4969 |
clocks = <&aoss_qmp>; |
| 4970 |
clock-names = "apb_pclk"; |
| 4971 |
}; |
| 4972 |
|
| 4973 |
sram@146aa000 { |
| 4974 |
compatible = "qcom,sm8450-imem", "syscon", "simple-mfd"; |
| 4975 |
reg = <0 0x146aa000 0 0x1000>; |
| 4976 |
ranges = <0 0 0x146aa000 0x1000>; |
| 4977 |
|
| 4978 |
#address-cells = <1>; |
| 4979 |
#size-cells = <1>; |
| 4980 |
|
| 4981 |
pil-reloc@94c { |
| 4982 |
compatible = "qcom,pil-reloc-info"; |
| 4983 |
reg = <0x94c 0xc8>; |
| 4984 |
}; |
| 4985 |
}; |
| 4986 |
|
| 4987 |
apps_smmu: iommu@15000000 { |
| 4988 |
compatible = "qcom,sm8450-smmu-500", "arm,mmu-500"; |
| 4989 |
reg = <0 0x15000000 0 0x100000>; |
| 4990 |
#iommu-cells = <2>; |
| 4991 |
#global-interrupts = <1>; |
| 4992 |
interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>, |
| 4993 |
<GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>, |
| 4994 |
<GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>, |
| 4995 |
<GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>, |
| 4996 |
<GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>, |
| 4997 |
<GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>, |
| 4998 |
<GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>, |
| 4999 |
<GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>, |
| 5000 |
<GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>, |
| 5001 |
<GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>, |
| 5002 |
<GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>, |
| 5003 |
<GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>, |
| 5004 |
<GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>, |
| 5005 |
<GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>, |
| 5006 |
<GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>, |
| 5007 |
<GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>, |
| 5008 |
<GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>, |
| 5009 |
<GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>, |
| 5010 |
<GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>, |
| 5011 |
<GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>, |
| 5012 |
<GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>, |
| 5013 |
<GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>, |
| 5014 |
<GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>, |
| 5015 |
<GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>, |
| 5016 |
<GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>, |
| 5017 |
<GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>, |
| 5018 |
<GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>, |
| 5019 |
<GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>, |
| 5020 |
<GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>, |
| 5021 |
<GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>, |
| 5022 |
<GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>, |
| 5023 |
<GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>, |
| 5024 |
<GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>, |
| 5025 |
<GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>, |
| 5026 |
<GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>, |
| 5027 |
<GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>, |
| 5028 |
<GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>, |
| 5029 |
<GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>, |
| 5030 |
<GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>, |
| 5031 |
<GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>, |
| 5032 |
<GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>, |
| 5033 |
<GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>, |
| 5034 |
<GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>, |
| 5035 |
<GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>, |
| 5036 |
<GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>, |
| 5037 |
<GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>, |
| 5038 |
<GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>, |
| 5039 |
<GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>, |
| 5040 |
<GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>, |
| 5041 |
<GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>, |
| 5042 |
<GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>, |
| 5043 |
<GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>, |
| 5044 |
<GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>, |
| 5045 |
<GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>, |
| 5046 |
<GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>, |
| 5047 |
<GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>, |
| 5048 |
<GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>, |
| 5049 |
<GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>, |
| 5050 |
<GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>, |
| 5051 |
<GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>, |
| 5052 |
<GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>, |
| 5053 |
<GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>, |
| 5054 |
<GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>, |
| 5055 |
<GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>, |
| 5056 |
<GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>, |
| 5057 |
<GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>, |
| 5058 |
<GIC_SPI 395 IRQ_TYPE_LEVEL_HIGH>, |
| 5059 |
<GIC_SPI 396 IRQ_TYPE_LEVEL_HIGH>, |
| 5060 |
<GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>, |
| 5061 |
<GIC_SPI 398 IRQ_TYPE_LEVEL_HIGH>, |
| 5062 |
<GIC_SPI 399 IRQ_TYPE_LEVEL_HIGH>, |
| 5063 |
<GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH>, |
| 5064 |
<GIC_SPI 401 IRQ_TYPE_LEVEL_HIGH>, |
| 5065 |
<GIC_SPI 402 IRQ_TYPE_LEVEL_HIGH>, |
| 5066 |
<GIC_SPI 403 IRQ_TYPE_LEVEL_HIGH>, |
| 5067 |
<GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>, |
| 5068 |
<GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>, |
| 5069 |
<GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>, |
| 5070 |
<GIC_SPI 407 IRQ_TYPE_LEVEL_HIGH>, |
| 5071 |
<GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>, |
| 5072 |
<GIC_SPI 409 IRQ_TYPE_LEVEL_HIGH>, |
| 5073 |
<GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>, |
| 5074 |
<GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>, |
| 5075 |
<GIC_SPI 412 IRQ_TYPE_LEVEL_HIGH>, |
| 5076 |
<GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>, |
| 5077 |
<GIC_SPI 707 IRQ_TYPE_LEVEL_HIGH>, |
| 5078 |
<GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>, |
| 5079 |
<GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>, |
| 5080 |
<GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>, |
| 5081 |
<GIC_SPI 690 IRQ_TYPE_LEVEL_HIGH>, |
| 5082 |
<GIC_SPI 691 IRQ_TYPE_LEVEL_HIGH>, |
| 5083 |
<GIC_SPI 692 IRQ_TYPE_LEVEL_HIGH>, |
| 5084 |
<GIC_SPI 693 IRQ_TYPE_LEVEL_HIGH>, |
| 5085 |
<GIC_SPI 694 IRQ_TYPE_LEVEL_HIGH>, |
| 5086 |
<GIC_SPI 695 IRQ_TYPE_LEVEL_HIGH>, |
| 5087 |
<GIC_SPI 696 IRQ_TYPE_LEVEL_HIGH>, |
| 5088 |
<GIC_SPI 697 IRQ_TYPE_LEVEL_HIGH>; |
| 5089 |
dma-coherent; |
| 5090 |
}; |
| 5091 |
|
| 5092 |
intc: interrupt-controller@17100000 { |
| 5093 |
compatible = "arm,gic-v3"; |
| 5094 |
#interrupt-cells = <3>; |
| 5095 |
interrupt-controller; |
| 5096 |
#redistributor-regions = <1>; |
| 5097 |
redistributor-stride = <0x0 0x40000>; |
| 5098 |
reg = <0x0 0x17100000 0x0 0x10000>, /* GICD */ |
| 5099 |
<0x0 0x17180000 0x0 0x200000>; /* GICR * 8 */ |
| 5100 |
interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; |
| 5101 |
#address-cells = <2>; |
| 5102 |
#size-cells = <2>; |
| 5103 |
ranges; |
| 5104 |
|
| 5105 |
gic_its: msi-controller@17140000 { |
| 5106 |
compatible = "arm,gic-v3-its"; |
| 5107 |
reg = <0x0 0x17140000 0x0 0x20000>; |
| 5108 |
msi-controller; |
| 5109 |
#msi-cells = <1>; |
| 5110 |
}; |
| 5111 |
}; |
| 5112 |
|
| 5113 |
timer@17420000 { |
| 5114 |
compatible = "arm,armv7-timer-mem"; |
| 5115 |
#address-cells = <1>; |
| 5116 |
#size-cells = <1>; |
| 5117 |
ranges = <0 0 0 0x20000000>; |
| 5118 |
reg = <0x0 0x17420000 0x0 0x1000>; |
| 5119 |
clock-frequency = <19200000>; |
| 5120 |
|
| 5121 |
frame@17421000 { |
| 5122 |
frame-number = <0>; |
| 5123 |
interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, |
| 5124 |
<GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; |
| 5125 |
reg = <0x17421000 0x1000>, |
| 5126 |
<0x17422000 0x1000>; |
| 5127 |
}; |
| 5128 |
|
| 5129 |
frame@17423000 { |
| 5130 |
frame-number = <1>; |
| 5131 |
interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; |
| 5132 |
reg = <0x17423000 0x1000>; |
| 5133 |
status = "disabled"; |
| 5134 |
}; |
| 5135 |
|
| 5136 |
frame@17425000 { |
| 5137 |
frame-number = <2>; |
| 5138 |
interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; |
| 5139 |
reg = <0x17425000 0x1000>; |
| 5140 |
status = "disabled"; |
| 5141 |
}; |
| 5142 |
|
| 5143 |
frame@17427000 { |
| 5144 |
frame-number = <3>; |
| 5145 |
interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; |
| 5146 |
reg = <0x17427000 0x1000>; |
| 5147 |
status = "disabled"; |
| 5148 |
}; |
| 5149 |
|
| 5150 |
frame@17429000 { |
| 5151 |
frame-number = <4>; |
| 5152 |
interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; |
| 5153 |
reg = <0x17429000 0x1000>; |
| 5154 |
status = "disabled"; |
| 5155 |
}; |
| 5156 |
|
| 5157 |
frame@1742b000 { |
| 5158 |
frame-number = <5>; |
| 5159 |
interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; |
| 5160 |
reg = <0x1742b000 0x1000>; |
| 5161 |
status = "disabled"; |
| 5162 |
}; |
| 5163 |
|
| 5164 |
frame@1742d000 { |
| 5165 |
frame-number = <6>; |
| 5166 |
interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; |
| 5167 |
reg = <0x1742d000 0x1000>; |
| 5168 |
status = "disabled"; |
| 5169 |
}; |
| 5170 |
}; |
| 5171 |
|
| 5172 |
apps_rsc: rsc@17a00000 { |
| 5173 |
label = "apps_rsc"; |
| 5174 |
compatible = "qcom,rpmh-rsc"; |
| 5175 |
reg = <0x0 0x17a00000 0x0 0x10000>, |
| 5176 |
<0x0 0x17a10000 0x0 0x10000>, |
| 5177 |
<0x0 0x17a20000 0x0 0x10000>, |
| 5178 |
<0x0 0x17a30000 0x0 0x10000>; |
| 5179 |
reg-names = "drv-0", "drv-1", "drv-2", "drv-3"; |
| 5180 |
interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>, |
| 5181 |
<GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>, |
| 5182 |
<GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>; |
| 5183 |
qcom,tcs-offset = <0xd00>; |
| 5184 |
qcom,drv-id = <2>; |
| 5185 |
qcom,tcs-config = <ACTIVE_TCS 3>, <SLEEP_TCS 2>, |
| 5186 |
<WAKE_TCS 2>, <CONTROL_TCS 0>; |
| 5187 |
power-domains = <&cluster_pd>; |
| 5188 |
|
| 5189 |
apps_bcm_voter: bcm-voter { |
| 5190 |
compatible = "qcom,bcm-voter"; |
| 5191 |
}; |
| 5192 |
|
| 5193 |
rpmhcc: clock-controller { |
| 5194 |
compatible = "qcom,sm8450-rpmh-clk"; |
| 5195 |
#clock-cells = <1>; |
| 5196 |
clock-names = "xo"; |
| 5197 |
clocks = <&xo_board>; |
| 5198 |
}; |
| 5199 |
|
| 5200 |
rpmhpd: power-controller { |
| 5201 |
compatible = "qcom,sm8450-rpmhpd"; |
| 5202 |
#power-domain-cells = <1>; |
| 5203 |
operating-points-v2 = <&rpmhpd_opp_table>; |
| 5204 |
|
| 5205 |
rpmhpd_opp_table: opp-table { |
| 5206 |
compatible = "operating-points-v2"; |
| 5207 |
|
| 5208 |
rpmhpd_opp_ret: opp1 { |
| 5209 |
opp-level = <RPMH_REGULATOR_LEVEL_RETENTION>; |
| 5210 |
}; |
| 5211 |
|
| 5212 |
rpmhpd_opp_min_svs: opp2 { |
| 5213 |
opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>; |
| 5214 |
}; |
| 5215 |
|
| 5216 |
rpmhpd_opp_low_svs_d1: opp3 { |
| 5217 |
opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_D1>; |
| 5218 |
}; |
| 5219 |
|
| 5220 |
rpmhpd_opp_low_svs: opp4 { |
| 5221 |
opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>; |
| 5222 |
}; |
| 5223 |
|
| 5224 |
rpmhpd_opp_low_svs_l1: opp5 { |
| 5225 |
opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_L1>; |
| 5226 |
}; |
| 5227 |
|
| 5228 |
rpmhpd_opp_svs: opp6 { |
| 5229 |
opp-level = <RPMH_REGULATOR_LEVEL_SVS>; |
| 5230 |
}; |
| 5231 |
|
| 5232 |
rpmhpd_opp_svs_l0: opp7 { |
| 5233 |
opp-level = <RPMH_REGULATOR_LEVEL_SVS_L0>; |
| 5234 |
}; |
| 5235 |
|
| 5236 |
rpmhpd_opp_svs_l1: opp8 { |
| 5237 |
opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>; |
| 5238 |
}; |
| 5239 |
|
| 5240 |
rpmhpd_opp_svs_l2: opp9 { |
| 5241 |
opp-level = <RPMH_REGULATOR_LEVEL_SVS_L2>; |
| 5242 |
}; |
| 5243 |
|
| 5244 |
rpmhpd_opp_nom: opp10 { |
| 5245 |
opp-level = <RPMH_REGULATOR_LEVEL_NOM>; |
| 5246 |
}; |
| 5247 |
|
| 5248 |
rpmhpd_opp_nom_l1: opp11 { |
| 5249 |
opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>; |
| 5250 |
}; |
| 5251 |
|
| 5252 |
rpmhpd_opp_nom_l2: opp12 { |
| 5253 |
opp-level = <RPMH_REGULATOR_LEVEL_NOM_L2>; |
| 5254 |
}; |
| 5255 |
|
| 5256 |
rpmhpd_opp_turbo: opp13 { |
| 5257 |
opp-level = <RPMH_REGULATOR_LEVEL_TURBO>; |
| 5258 |
}; |
| 5259 |
|
| 5260 |
rpmhpd_opp_turbo_l1: opp14 { |
| 5261 |
opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>; |
| 5262 |
}; |
| 5263 |
}; |
| 5264 |
}; |
| 5265 |
}; |
| 5266 |
|
| 5267 |
cpufreq_hw: cpufreq@17d91000 { |
| 5268 |
compatible = "qcom,sm8450-cpufreq-epss", "qcom,cpufreq-epss"; |
| 5269 |
reg = <0 0x17d91000 0 0x1000>, |
| 5270 |
<0 0x17d92000 0 0x1000>, |
| 5271 |
<0 0x17d93000 0 0x1000>; |
| 5272 |
reg-names = "freq-domain0", "freq-domain1", "freq-domain2"; |
| 5273 |
clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GCC_GPLL0>; |
| 5274 |
clock-names = "xo", "alternate"; |
| 5275 |
interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>, |
| 5276 |
<GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>, |
| 5277 |
<GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>; |
| 5278 |
interrupt-names = "dcvsh-irq-0", "dcvsh-irq-1", "dcvsh-irq-2"; |
| 5279 |
#freq-domain-cells = <1>; |
| 5280 |
#clock-cells = <1>; |
| 5281 |
}; |
| 5282 |
|
| 5283 |
gem_noc: interconnect@19100000 { |
| 5284 |
compatible = "qcom,sm8450-gem-noc"; |
| 5285 |
reg = <0 0x19100000 0 0xbb800>; |
| 5286 |
#interconnect-cells = <2>; |
| 5287 |
qcom,bcm-voters = <&apps_bcm_voter>; |
| 5288 |
}; |
| 5289 |
|
| 5290 |
system-cache-controller@19200000 { |
| 5291 |
compatible = "qcom,sm8450-llcc"; |
| 5292 |
reg = <0 0x19200000 0 0x80000>, <0 0x19600000 0 0x80000>, |
| 5293 |
<0 0x19300000 0 0x80000>, <0 0x19700000 0 0x80000>, |
| 5294 |
<0 0x19a00000 0 0x80000>, <0 0x19c00000 0 0x80000>; |
| 5295 |
reg-names = "llcc0_base", "llcc1_base", "llcc2_base", |
| 5296 |
"llcc3_base", "llcc_broadcast_base", |
| 5297 |
"llcc_broadcast_and_base"; |
| 5298 |
interrupts = <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>; |
| 5299 |
}; |
| 5300 |
|
| 5301 |
ufs_mem_hc: ufshc@1d84000 { |
| 5302 |
compatible = "qcom,sm8450-ufshc", "qcom,ufshc", |
| 5303 |
"jedec,ufs-2.0"; |
| 5304 |
reg = <0 0x01d84000 0 0x3000>; |
| 5305 |
interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>; |
| 5306 |
phys = <&ufs_mem_phy>; |
| 5307 |
phy-names = "ufsphy"; |
| 5308 |
lanes-per-direction = <2>; |
| 5309 |
#reset-cells = <1>; |
| 5310 |
resets = <&gcc GCC_UFS_PHY_BCR>; |
| 5311 |
reset-names = "rst"; |
| 5312 |
|
| 5313 |
power-domains = <&gcc UFS_PHY_GDSC>; |
| 5314 |
|
| 5315 |
iommus = <&apps_smmu 0xe0 0x0>; |
| 5316 |
dma-coherent; |
| 5317 |
|
| 5318 |
interconnects = <&aggre1_noc MASTER_UFS_MEM 0 &mc_virt SLAVE_EBI1 0>, |
| 5319 |
<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_UFS_MEM_CFG 0>; |
| 5320 |
interconnect-names = "ufs-ddr", "cpu-ufs"; |
| 5321 |
clock-names = |
| 5322 |
"core_clk", |
| 5323 |
"bus_aggr_clk", |
| 5324 |
"iface_clk", |
| 5325 |
"core_clk_unipro", |
| 5326 |
"ref_clk", |
| 5327 |
"tx_lane0_sync_clk", |
| 5328 |
"rx_lane0_sync_clk", |
| 5329 |
"rx_lane1_sync_clk"; |
| 5330 |
clocks = |
| 5331 |
<&gcc GCC_UFS_PHY_AXI_CLK>, |
| 5332 |
<&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>, |
| 5333 |
<&gcc GCC_UFS_PHY_AHB_CLK>, |
| 5334 |
<&gcc GCC_UFS_PHY_UNIPRO_CORE_CLK>, |
| 5335 |
<&rpmhcc RPMH_CXO_CLK>, |
| 5336 |
<&gcc GCC_UFS_PHY_TX_SYMBOL_0_CLK>, |
| 5337 |
<&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>, |
| 5338 |
<&gcc GCC_UFS_PHY_RX_SYMBOL_1_CLK>; |
| 5339 |
freq-table-hz = |
| 5340 |
<75000000 300000000>, |
| 5341 |
<0 0>, |
| 5342 |
<0 0>, |
| 5343 |
<75000000 300000000>, |
| 5344 |
<75000000 300000000>, |
| 5345 |
<0 0>, |
| 5346 |
<0 0>, |
| 5347 |
<0 0>; |
| 5348 |
qcom,ice = <&ice>; |
| 5349 |
|
| 5350 |
status = "disabled"; |
| 5351 |
}; |
| 5352 |
|
| 5353 |
ufs_mem_phy: phy@1d87000 { |
| 5354 |
compatible = "qcom,sm8450-qmp-ufs-phy"; |
| 5355 |
reg = <0 0x01d87000 0 0x1000>; |
| 5356 |
|
| 5357 |
clock-names = "ref", "ref_aux", "qref"; |
| 5358 |
clocks = <&rpmhcc RPMH_CXO_CLK>, |
| 5359 |
<&gcc GCC_UFS_PHY_PHY_AUX_CLK>, |
| 5360 |
<&gcc GCC_UFS_0_CLKREF_EN>; |
| 5361 |
|
| 5362 |
power-domains = <&gcc UFS_PHY_GDSC>; |
| 5363 |
|
| 5364 |
resets = <&ufs_mem_hc 0>; |
| 5365 |
reset-names = "ufsphy"; |
| 5366 |
|
| 5367 |
#clock-cells = <1>; |
| 5368 |
#phy-cells = <0>; |
| 5369 |
|
| 5370 |
status = "disabled"; |
| 5371 |
}; |
| 5372 |
|
| 5373 |
ice: crypto@1d88000 { |
| 5374 |
compatible = "qcom,sm8450-inline-crypto-engine", |
| 5375 |
"qcom,inline-crypto-engine"; |
| 5376 |
reg = <0 0x01d88000 0 0x8000>; |
| 5377 |
clocks = <&gcc GCC_UFS_PHY_ICE_CORE_CLK>; |
| 5378 |
}; |
| 5379 |
|
| 5380 |
cryptobam: dma-controller@1dc4000 { |
| 5381 |
compatible = "qcom,bam-v1.7.4", "qcom,bam-v1.7.0"; |
| 5382 |
reg = <0 0x01dc4000 0 0x28000>; |
| 5383 |
interrupts = <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>; |
| 5384 |
#dma-cells = <1>; |
| 5385 |
qcom,ee = <0>; |
| 5386 |
qcom,num-ees = <4>; |
| 5387 |
num-channels = <16>; |
| 5388 |
qcom,controlled-remotely; |
| 5389 |
iommus = <&apps_smmu 0x584 0x11>, |
| 5390 |
<&apps_smmu 0x588 0x0>, |
| 5391 |
<&apps_smmu 0x598 0x5>, |
| 5392 |
<&apps_smmu 0x59a 0x0>, |
| 5393 |
<&apps_smmu 0x59f 0x0>; |
| 5394 |
}; |
| 5395 |
|
| 5396 |
crypto: crypto@1dfa000 { |
| 5397 |
compatible = "qcom,sm8450-qce", "qcom,sm8150-qce", "qcom,qce"; |
| 5398 |
reg = <0 0x01dfa000 0 0x6000>; |
| 5399 |
dmas = <&cryptobam 4>, <&cryptobam 5>; |
| 5400 |
dma-names = "rx", "tx"; |
| 5401 |
iommus = <&apps_smmu 0x584 0x11>, |
| 5402 |
<&apps_smmu 0x588 0x0>, |
| 5403 |
<&apps_smmu 0x598 0x5>, |
| 5404 |
<&apps_smmu 0x59a 0x0>, |
| 5405 |
<&apps_smmu 0x59f 0x0>; |
| 5406 |
interconnects = <&aggre2_noc MASTER_CRYPTO 0 &mc_virt SLAVE_EBI1 0>; |
| 5407 |
interconnect-names = "memory"; |
| 5408 |
}; |
| 5409 |
|
| 5410 |
sdhc_2: mmc@8804000 { |
| 5411 |
compatible = "qcom,sm8450-sdhci", "qcom,sdhci-msm-v5"; |
| 5412 |
reg = <0 0x08804000 0 0x1000>; |
| 5413 |
|
| 5414 |
interrupts = <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>, |
| 5415 |
<GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>; |
| 5416 |
interrupt-names = "hc_irq", "pwr_irq"; |
| 5417 |
|
| 5418 |
clocks = <&gcc GCC_SDCC2_AHB_CLK>, |
| 5419 |
<&gcc GCC_SDCC2_APPS_CLK>, |
| 5420 |
<&rpmhcc RPMH_CXO_CLK>; |
| 5421 |
clock-names = "iface", "core", "xo"; |
| 5422 |
resets = <&gcc GCC_SDCC2_BCR>; |
| 5423 |
interconnects = <&aggre2_noc MASTER_SDCC_2 0 &mc_virt SLAVE_EBI1 0>, |
| 5424 |
<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_SDCC_2 0>; |
| 5425 |
interconnect-names = "sdhc-ddr","cpu-sdhc"; |
| 5426 |
iommus = <&apps_smmu 0x4a0 0x0>; |
| 5427 |
power-domains = <&rpmhpd RPMHPD_CX>; |
| 5428 |
operating-points-v2 = <&sdhc2_opp_table>; |
| 5429 |
bus-width = <4>; |
| 5430 |
dma-coherent; |
| 5431 |
|
| 5432 |
/* Forbid SDR104/SDR50 - broken hw! */ |
| 5433 |
sdhci-caps-mask = <0x3 0x0>; |
| 5434 |
|
| 5435 |
status = "disabled"; |
| 5436 |
|
| 5437 |
sdhc2_opp_table: opp-table { |
| 5438 |
compatible = "operating-points-v2"; |
| 5439 |
|
| 5440 |
opp-100000000 { |
| 5441 |
opp-hz = /bits/ 64 <100000000>; |
| 5442 |
required-opps = <&rpmhpd_opp_low_svs>; |
| 5443 |
}; |
| 5444 |
|
| 5445 |
opp-202000000 { |
| 5446 |
opp-hz = /bits/ 64 <202000000>; |
| 5447 |
required-opps = <&rpmhpd_opp_svs_l1>; |
| 5448 |
}; |
| 5449 |
}; |
| 5450 |
}; |
| 5451 |
|
| 5452 |
usb_1: usb@a600000 { |
| 5453 |
compatible = "qcom,sm8450-dwc3", "qcom,snps-dwc3"; |
| 5454 |
reg = <0 0x0a600000 0 0xfc100>; |
| 5455 |
status = "disabled"; |
| 5456 |
|
| 5457 |
clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>, |
| 5458 |
<&gcc GCC_USB30_PRIM_MASTER_CLK>, |
| 5459 |
<&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>, |
| 5460 |
<&gcc GCC_USB30_PRIM_SLEEP_CLK>, |
| 5461 |
<&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>, |
| 5462 |
<&gcc GCC_USB3_0_CLKREF_EN>; |
| 5463 |
clock-names = "cfg_noc", |
| 5464 |
"core", |
| 5465 |
"iface", |
| 5466 |
"sleep", |
| 5467 |
"mock_utmi", |
| 5468 |
"xo"; |
| 5469 |
|
| 5470 |
assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>, |
| 5471 |
<&gcc GCC_USB30_PRIM_MASTER_CLK>; |
| 5472 |
assigned-clock-rates = <19200000>, <200000000>; |
| 5473 |
|
| 5474 |
interrupts-extended = <&intc GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>, |
| 5475 |
<&intc GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>, |
| 5476 |
<&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>, |
| 5477 |
<&pdc 14 IRQ_TYPE_EDGE_BOTH>, |
| 5478 |
<&pdc 15 IRQ_TYPE_EDGE_BOTH>, |
| 5479 |
<&pdc 17 IRQ_TYPE_LEVEL_HIGH>; |
| 5480 |
interrupt-names = "dwc_usb3", |
| 5481 |
"pwr_event", |
| 5482 |
"hs_phy_irq", |
| 5483 |
"dp_hs_phy_irq", |
| 5484 |
"dm_hs_phy_irq", |
| 5485 |
"ss_phy_irq"; |
| 5486 |
|
| 5487 |
power-domains = <&gcc USB30_PRIM_GDSC>; |
| 5488 |
|
| 5489 |
resets = <&gcc GCC_USB30_PRIM_BCR>; |
| 5490 |
|
| 5491 |
interconnects = <&aggre1_noc MASTER_USB3_0 0 &mc_virt SLAVE_EBI1 0>, |
| 5492 |
<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_USB3_0 0>; |
| 5493 |
interconnect-names = "usb-ddr", "apps-usb"; |
| 5494 |
|
| 5495 |
iommus = <&apps_smmu 0x0 0x0>; |
| 5496 |
snps,dis_u2_susphy_quirk; |
| 5497 |
snps,dis_u3_susphy_quirk; |
| 5498 |
snps,dis_enblslpm_quirk; |
| 5499 |
snps,dis-u1-entry-quirk; |
| 5500 |
snps,dis-u2-entry-quirk; |
| 5501 |
phys = <&usb_1_hsphy>, <&usb_1_qmpphy QMP_USB43DP_USB3_PHY>; |
| 5502 |
phy-names = "usb2-phy", "usb3-phy"; |
| 5503 |
usb-role-switch; |
| 5504 |
|
| 5505 |
ports { |
| 5506 |
#address-cells = <1>; |
| 5507 |
#size-cells = <0>; |
| 5508 |
|
| 5509 |
port@0 { |
| 5510 |
reg = <0>; |
| 5511 |
|
| 5512 |
usb_1_dwc3_hs: endpoint { |
| 5513 |
}; |
| 5514 |
}; |
| 5515 |
|
| 5516 |
port@1 { |
| 5517 |
reg = <1>; |
| 5518 |
|
| 5519 |
usb_1_dwc3_ss: endpoint { |
| 5520 |
remote-endpoint = <&usb_1_qmpphy_usb_ss_in>; |
| 5521 |
}; |
| 5522 |
}; |
| 5523 |
}; |
| 5524 |
}; |
| 5525 |
|
| 5526 |
nsp_noc: interconnect@320c0000 { |
| 5527 |
compatible = "qcom,sm8450-nsp-noc"; |
| 5528 |
reg = <0 0x320c0000 0 0x10000>; |
| 5529 |
#interconnect-cells = <2>; |
| 5530 |
qcom,bcm-voters = <&apps_bcm_voter>; |
| 5531 |
}; |
| 5532 |
|
| 5533 |
lpass_ag_noc: interconnect@3c40000 { |
| 5534 |
compatible = "qcom,sm8450-lpass-ag-noc"; |
| 5535 |
reg = <0 0x03c40000 0 0x17200>; |
| 5536 |
#interconnect-cells = <2>; |
| 5537 |
qcom,bcm-voters = <&apps_bcm_voter>; |
| 5538 |
}; |
| 5539 |
}; |
| 5540 |
|
| 5541 |
sound: sound { |
| 5542 |
}; |
| 5543 |
|
| 5544 |
thermal-zones { |
| 5545 |
aoss0-thermal { |
| 5546 |
thermal-sensors = <&tsens0 0>; |
| 5547 |
|
| 5548 |
trips { |
| 5549 |
thermal-engine-config { |
| 5550 |
temperature = <125000>; |
| 5551 |
hysteresis = <1000>; |
| 5552 |
type = "passive"; |
| 5553 |
}; |
| 5554 |
|
| 5555 |
reset-mon-cfg { |
| 5556 |
temperature = <115000>; |
| 5557 |
hysteresis = <5000>; |
| 5558 |
type = "passive"; |
| 5559 |
}; |
| 5560 |
}; |
| 5561 |
}; |
| 5562 |
|
| 5563 |
cpuss0-thermal { |
| 5564 |
thermal-sensors = <&tsens0 1>; |
| 5565 |
|
| 5566 |
trips { |
| 5567 |
thermal-engine-config { |
| 5568 |
temperature = <125000>; |
| 5569 |
hysteresis = <1000>; |
| 5570 |
type = "passive"; |
| 5571 |
}; |
| 5572 |
|
| 5573 |
reset-mon-cfg { |
| 5574 |
temperature = <115000>; |
| 5575 |
hysteresis = <5000>; |
| 5576 |
type = "passive"; |
| 5577 |
}; |
| 5578 |
}; |
| 5579 |
}; |
| 5580 |
|
| 5581 |
cpuss1-thermal { |
| 5582 |
thermal-sensors = <&tsens0 2>; |
| 5583 |
|
| 5584 |
trips { |
| 5585 |
thermal-engine-config { |
| 5586 |
temperature = <125000>; |
| 5587 |
hysteresis = <1000>; |
| 5588 |
type = "passive"; |
| 5589 |
}; |
| 5590 |
|
| 5591 |
reset-mon-cfg { |
| 5592 |
temperature = <115000>; |
| 5593 |
hysteresis = <5000>; |
| 5594 |
type = "passive"; |
| 5595 |
}; |
| 5596 |
}; |
| 5597 |
}; |
| 5598 |
|
| 5599 |
cpuss3-thermal { |
| 5600 |
thermal-sensors = <&tsens0 3>; |
| 5601 |
|
| 5602 |
trips { |
| 5603 |
thermal-engine-config { |
| 5604 |
temperature = <125000>; |
| 5605 |
hysteresis = <1000>; |
| 5606 |
type = "passive"; |
| 5607 |
}; |
| 5608 |
|
| 5609 |
reset-mon-cfg { |
| 5610 |
temperature = <115000>; |
| 5611 |
hysteresis = <5000>; |
| 5612 |
type = "passive"; |
| 5613 |
}; |
| 5614 |
}; |
| 5615 |
}; |
| 5616 |
|
| 5617 |
cpuss4-thermal { |
| 5618 |
thermal-sensors = <&tsens0 4>; |
| 5619 |
|
| 5620 |
trips { |
| 5621 |
thermal-engine-config { |
| 5622 |
temperature = <125000>; |
| 5623 |
hysteresis = <1000>; |
| 5624 |
type = "passive"; |
| 5625 |
}; |
| 5626 |
|
| 5627 |
reset-mon-cfg { |
| 5628 |
temperature = <115000>; |
| 5629 |
hysteresis = <5000>; |
| 5630 |
type = "passive"; |
| 5631 |
}; |
| 5632 |
}; |
| 5633 |
}; |
| 5634 |
|
| 5635 |
cpu4-top-thermal { |
| 5636 |
thermal-sensors = <&tsens0 5>; |
| 5637 |
|
| 5638 |
trips { |
| 5639 |
cpu4_top_alert0: trip-point0 { |
| 5640 |
temperature = <90000>; |
| 5641 |
hysteresis = <2000>; |
| 5642 |
type = "passive"; |
| 5643 |
}; |
| 5644 |
|
| 5645 |
cpu4_top_alert1: trip-point1 { |
| 5646 |
temperature = <95000>; |
| 5647 |
hysteresis = <2000>; |
| 5648 |
type = "passive"; |
| 5649 |
}; |
| 5650 |
|
| 5651 |
cpu4_top_crit: cpu-crit { |
| 5652 |
temperature = <110000>; |
| 5653 |
hysteresis = <1000>; |
| 5654 |
type = "critical"; |
| 5655 |
}; |
| 5656 |
}; |
| 5657 |
}; |
| 5658 |
|
| 5659 |
cpu4-bottom-thermal { |
| 5660 |
thermal-sensors = <&tsens0 6>; |
| 5661 |
|
| 5662 |
trips { |
| 5663 |
cpu4_bottom_alert0: trip-point0 { |
| 5664 |
temperature = <90000>; |
| 5665 |
hysteresis = <2000>; |
| 5666 |
type = "passive"; |
| 5667 |
}; |
| 5668 |
|
| 5669 |
cpu4_bottom_alert1: trip-point1 { |
| 5670 |
temperature = <95000>; |
| 5671 |
hysteresis = <2000>; |
| 5672 |
type = "passive"; |
| 5673 |
}; |
| 5674 |
|
| 5675 |
cpu4_bottom_crit: cpu-crit { |
| 5676 |
temperature = <110000>; |
| 5677 |
hysteresis = <1000>; |
| 5678 |
type = "critical"; |
| 5679 |
}; |
| 5680 |
}; |
| 5681 |
}; |
| 5682 |
|
| 5683 |
cpu5-top-thermal { |
| 5684 |
thermal-sensors = <&tsens0 7>; |
| 5685 |
|
| 5686 |
trips { |
| 5687 |
cpu5_top_alert0: trip-point0 { |
| 5688 |
temperature = <90000>; |
| 5689 |
hysteresis = <2000>; |
| 5690 |
type = "passive"; |
| 5691 |
}; |
| 5692 |
|
| 5693 |
cpu5_top_alert1: trip-point1 { |
| 5694 |
temperature = <95000>; |
| 5695 |
hysteresis = <2000>; |
| 5696 |
type = "passive"; |
| 5697 |
}; |
| 5698 |
|
| 5699 |
cpu5_top_crit: cpu-crit { |
| 5700 |
temperature = <110000>; |
| 5701 |
hysteresis = <1000>; |
| 5702 |
type = "critical"; |
| 5703 |
}; |
| 5704 |
}; |
| 5705 |
}; |
| 5706 |
|
| 5707 |
cpu5-bottom-thermal { |
| 5708 |
thermal-sensors = <&tsens0 8>; |
| 5709 |
|
| 5710 |
trips { |
| 5711 |
cpu5_bottom_alert0: trip-point0 { |
| 5712 |
temperature = <90000>; |
| 5713 |
hysteresis = <2000>; |
| 5714 |
type = "passive"; |
| 5715 |
}; |
| 5716 |
|
| 5717 |
cpu5_bottom_alert1: trip-point1 { |
| 5718 |
temperature = <95000>; |
| 5719 |
hysteresis = <2000>; |
| 5720 |
type = "passive"; |
| 5721 |
}; |
| 5722 |
|
| 5723 |
cpu5_bottom_crit: cpu-crit { |
| 5724 |
temperature = <110000>; |
| 5725 |
hysteresis = <1000>; |
| 5726 |
type = "critical"; |
| 5727 |
}; |
| 5728 |
}; |
| 5729 |
}; |
| 5730 |
|
| 5731 |
cpu6-top-thermal { |
| 5732 |
thermal-sensors = <&tsens0 9>; |
| 5733 |
|
| 5734 |
trips { |
| 5735 |
cpu6_top_alert0: trip-point0 { |
| 5736 |
temperature = <90000>; |
| 5737 |
hysteresis = <2000>; |
| 5738 |
type = "passive"; |
| 5739 |
}; |
| 5740 |
|
| 5741 |
cpu6_top_alert1: trip-point1 { |
| 5742 |
temperature = <95000>; |
| 5743 |
hysteresis = <2000>; |
| 5744 |
type = "passive"; |
| 5745 |
}; |
| 5746 |
|
| 5747 |
cpu6_top_crit: cpu-crit { |
| 5748 |
temperature = <110000>; |
| 5749 |
hysteresis = <1000>; |
| 5750 |
type = "critical"; |
| 5751 |
}; |
| 5752 |
}; |
| 5753 |
}; |
| 5754 |
|
| 5755 |
cpu6-bottom-thermal { |
| 5756 |
thermal-sensors = <&tsens0 10>; |
| 5757 |
|
| 5758 |
trips { |
| 5759 |
cpu6_bottom_alert0: trip-point0 { |
| 5760 |
temperature = <90000>; |
| 5761 |
hysteresis = <2000>; |
| 5762 |
type = "passive"; |
| 5763 |
}; |
| 5764 |
|
| 5765 |
cpu6_bottom_alert1: trip-point1 { |
| 5766 |
temperature = <95000>; |
| 5767 |
hysteresis = <2000>; |
| 5768 |
type = "passive"; |
| 5769 |
}; |
| 5770 |
|
| 5771 |
cpu6_bottom_crit: cpu-crit { |
| 5772 |
temperature = <110000>; |
| 5773 |
hysteresis = <1000>; |
| 5774 |
type = "critical"; |
| 5775 |
}; |
| 5776 |
}; |
| 5777 |
}; |
| 5778 |
|
| 5779 |
cpu7-top-thermal { |
| 5780 |
thermal-sensors = <&tsens0 11>; |
| 5781 |
|
| 5782 |
trips { |
| 5783 |
cpu7_top_alert0: trip-point0 { |
| 5784 |
temperature = <90000>; |
| 5785 |
hysteresis = <2000>; |
| 5786 |
type = "passive"; |
| 5787 |
}; |
| 5788 |
|
| 5789 |
cpu7_top_alert1: trip-point1 { |
| 5790 |
temperature = <95000>; |
| 5791 |
hysteresis = <2000>; |
| 5792 |
type = "passive"; |
| 5793 |
}; |
| 5794 |
|
| 5795 |
cpu7_top_crit: cpu-crit { |
| 5796 |
temperature = <110000>; |
| 5797 |
hysteresis = <1000>; |
| 5798 |
type = "critical"; |
| 5799 |
}; |
| 5800 |
}; |
| 5801 |
}; |
| 5802 |
|
| 5803 |
cpu7-middle-thermal { |
| 5804 |
thermal-sensors = <&tsens0 12>; |
| 5805 |
|
| 5806 |
trips { |
| 5807 |
cpu7_middle_alert0: trip-point0 { |
| 5808 |
temperature = <90000>; |
| 5809 |
hysteresis = <2000>; |
| 5810 |
type = "passive"; |
| 5811 |
}; |
| 5812 |
|
| 5813 |
cpu7_middle_alert1: trip-point1 { |
| 5814 |
temperature = <95000>; |
| 5815 |
hysteresis = <2000>; |
| 5816 |
type = "passive"; |
| 5817 |
}; |
| 5818 |
|
| 5819 |
cpu7_middle_crit: cpu-crit { |
| 5820 |
temperature = <110000>; |
| 5821 |
hysteresis = <1000>; |
| 5822 |
type = "critical"; |
| 5823 |
}; |
| 5824 |
}; |
| 5825 |
}; |
| 5826 |
|
| 5827 |
cpu7-bottom-thermal { |
| 5828 |
thermal-sensors = <&tsens0 13>; |
| 5829 |
|
| 5830 |
trips { |
| 5831 |
cpu7_bottom_alert0: trip-point0 { |
| 5832 |
temperature = <90000>; |
| 5833 |
hysteresis = <2000>; |
| 5834 |
type = "passive"; |
| 5835 |
}; |
| 5836 |
|
| 5837 |
cpu7_bottom_alert1: trip-point1 { |
| 5838 |
temperature = <95000>; |
| 5839 |
hysteresis = <2000>; |
| 5840 |
type = "passive"; |
| 5841 |
}; |
| 5842 |
|
| 5843 |
cpu7_bottom_crit: cpu-crit { |
| 5844 |
temperature = <110000>; |
| 5845 |
hysteresis = <1000>; |
| 5846 |
type = "critical"; |
| 5847 |
}; |
| 5848 |
}; |
| 5849 |
}; |
| 5850 |
|
| 5851 |
gpu-top-thermal { |
| 5852 |
polling-delay-passive = <10>; |
| 5853 |
|
| 5854 |
thermal-sensors = <&tsens0 14>; |
| 5855 |
|
| 5856 |
cooling-maps { |
| 5857 |
map0 { |
| 5858 |
trip = <&gpu_top_alert0>; |
| 5859 |
cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; |
| 5860 |
}; |
| 5861 |
}; |
| 5862 |
|
| 5863 |
trips { |
| 5864 |
gpu_top_alert0: trip-point0 { |
| 5865 |
temperature = <85000>; |
| 5866 |
hysteresis = <1000>; |
| 5867 |
type = "passive"; |
| 5868 |
}; |
| 5869 |
|
| 5870 |
trip-point1 { |
| 5871 |
temperature = <90000>; |
| 5872 |
hysteresis = <1000>; |
| 5873 |
type = "hot"; |
| 5874 |
}; |
| 5875 |
|
| 5876 |
trip-point2 { |
| 5877 |
temperature = <110000>; |
| 5878 |
hysteresis = <1000>; |
| 5879 |
type = "critical"; |
| 5880 |
}; |
| 5881 |
}; |
| 5882 |
}; |
| 5883 |
|
| 5884 |
gpu-bottom-thermal { |
| 5885 |
polling-delay-passive = <10>; |
| 5886 |
|
| 5887 |
thermal-sensors = <&tsens0 15>; |
| 5888 |
|
| 5889 |
cooling-maps { |
| 5890 |
map0 { |
| 5891 |
trip = <&gpu_bottom_alert0>; |
| 5892 |
cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; |
| 5893 |
}; |
| 5894 |
}; |
| 5895 |
|
| 5896 |
trips { |
| 5897 |
gpu_bottom_alert0: trip-point0 { |
| 5898 |
temperature = <85000>; |
| 5899 |
hysteresis = <1000>; |
| 5900 |
type = "passive"; |
| 5901 |
}; |
| 5902 |
|
| 5903 |
trip-point1 { |
| 5904 |
temperature = <90000>; |
| 5905 |
hysteresis = <1000>; |
| 5906 |
type = "hot"; |
| 5907 |
}; |
| 5908 |
|
| 5909 |
trip-point2 { |
| 5910 |
temperature = <110000>; |
| 5911 |
hysteresis = <1000>; |
| 5912 |
type = "critical"; |
| 5913 |
}; |
| 5914 |
}; |
| 5915 |
}; |
| 5916 |
|
| 5917 |
aoss1-thermal { |
| 5918 |
thermal-sensors = <&tsens1 0>; |
| 5919 |
|
| 5920 |
trips { |
| 5921 |
thermal-engine-config { |
| 5922 |
temperature = <125000>; |
| 5923 |
hysteresis = <1000>; |
| 5924 |
type = "passive"; |
| 5925 |
}; |
| 5926 |
|
| 5927 |
reset-mon-cfg { |
| 5928 |
temperature = <115000>; |
| 5929 |
hysteresis = <5000>; |
| 5930 |
type = "passive"; |
| 5931 |
}; |
| 5932 |
}; |
| 5933 |
}; |
| 5934 |
|
| 5935 |
cpu0-thermal { |
| 5936 |
thermal-sensors = <&tsens1 1>; |
| 5937 |
|
| 5938 |
trips { |
| 5939 |
cpu0_alert0: trip-point0 { |
| 5940 |
temperature = <90000>; |
| 5941 |
hysteresis = <2000>; |
| 5942 |
type = "passive"; |
| 5943 |
}; |
| 5944 |
|
| 5945 |
cpu0_alert1: trip-point1 { |
| 5946 |
temperature = <95000>; |
| 5947 |
hysteresis = <2000>; |
| 5948 |
type = "passive"; |
| 5949 |
}; |
| 5950 |
|
| 5951 |
cpu0_crit: cpu-crit { |
| 5952 |
temperature = <110000>; |
| 5953 |
hysteresis = <1000>; |
| 5954 |
type = "critical"; |
| 5955 |
}; |
| 5956 |
}; |
| 5957 |
}; |
| 5958 |
|
| 5959 |
cpu1-thermal { |
| 5960 |
thermal-sensors = <&tsens1 2>; |
| 5961 |
|
| 5962 |
trips { |
| 5963 |
cpu1_alert0: trip-point0 { |
| 5964 |
temperature = <90000>; |
| 5965 |
hysteresis = <2000>; |
| 5966 |
type = "passive"; |
| 5967 |
}; |
| 5968 |
|
| 5969 |
cpu1_alert1: trip-point1 { |
| 5970 |
temperature = <95000>; |
| 5971 |
hysteresis = <2000>; |
| 5972 |
type = "passive"; |
| 5973 |
}; |
| 5974 |
|
| 5975 |
cpu1_crit: cpu-crit { |
| 5976 |
temperature = <110000>; |
| 5977 |
hysteresis = <1000>; |
| 5978 |
type = "critical"; |
| 5979 |
}; |
| 5980 |
}; |
| 5981 |
}; |
| 5982 |
|
| 5983 |
cpu2-thermal { |
| 5984 |
thermal-sensors = <&tsens1 3>; |
| 5985 |
|
| 5986 |
trips { |
| 5987 |
cpu2_alert0: trip-point0 { |
| 5988 |
temperature = <90000>; |
| 5989 |
hysteresis = <2000>; |
| 5990 |
type = "passive"; |
| 5991 |
}; |
| 5992 |
|
| 5993 |
cpu2_alert1: trip-point1 { |
| 5994 |
temperature = <95000>; |
| 5995 |
hysteresis = <2000>; |
| 5996 |
type = "passive"; |
| 5997 |
}; |
| 5998 |
|
| 5999 |
cpu2_crit: cpu-crit { |
| 6000 |
temperature = <110000>; |
| 6001 |
hysteresis = <1000>; |
| 6002 |
type = "critical"; |
| 6003 |
}; |
| 6004 |
}; |
| 6005 |
}; |
| 6006 |
|
| 6007 |
cpu3-thermal { |
| 6008 |
thermal-sensors = <&tsens1 4>; |
| 6009 |
|
| 6010 |
trips { |
| 6011 |
cpu3_alert0: trip-point0 { |
| 6012 |
temperature = <90000>; |
| 6013 |
hysteresis = <2000>; |
| 6014 |
type = "passive"; |
| 6015 |
}; |
| 6016 |
|
| 6017 |
cpu3_alert1: trip-point1 { |
| 6018 |
temperature = <95000>; |
| 6019 |
hysteresis = <2000>; |
| 6020 |
type = "passive"; |
| 6021 |
}; |
| 6022 |
|
| 6023 |
cpu3_crit: cpu-crit { |
| 6024 |
temperature = <110000>; |
| 6025 |
hysteresis = <1000>; |
| 6026 |
type = "critical"; |
| 6027 |
}; |
| 6028 |
}; |
| 6029 |
}; |
| 6030 |
|
| 6031 |
cdsp0-thermal { |
| 6032 |
polling-delay-passive = <10>; |
| 6033 |
|
| 6034 |
thermal-sensors = <&tsens1 5>; |
| 6035 |
|
| 6036 |
trips { |
| 6037 |
thermal-engine-config { |
| 6038 |
temperature = <125000>; |
| 6039 |
hysteresis = <1000>; |
| 6040 |
type = "passive"; |
| 6041 |
}; |
| 6042 |
|
| 6043 |
thermal-hal-config { |
| 6044 |
temperature = <125000>; |
| 6045 |
hysteresis = <1000>; |
| 6046 |
type = "passive"; |
| 6047 |
}; |
| 6048 |
|
| 6049 |
reset-mon-cfg { |
| 6050 |
temperature = <115000>; |
| 6051 |
hysteresis = <5000>; |
| 6052 |
type = "passive"; |
| 6053 |
}; |
| 6054 |
|
| 6055 |
cdsp_0_config: junction-config { |
| 6056 |
temperature = <95000>; |
| 6057 |
hysteresis = <5000>; |
| 6058 |
type = "passive"; |
| 6059 |
}; |
| 6060 |
}; |
| 6061 |
}; |
| 6062 |
|
| 6063 |
cdsp1-thermal { |
| 6064 |
polling-delay-passive = <10>; |
| 6065 |
|
| 6066 |
thermal-sensors = <&tsens1 6>; |
| 6067 |
|
| 6068 |
trips { |
| 6069 |
thermal-engine-config { |
| 6070 |
temperature = <125000>; |
| 6071 |
hysteresis = <1000>; |
| 6072 |
type = "passive"; |
| 6073 |
}; |
| 6074 |
|
| 6075 |
thermal-hal-config { |
| 6076 |
temperature = <125000>; |
| 6077 |
hysteresis = <1000>; |
| 6078 |
type = "passive"; |
| 6079 |
}; |
| 6080 |
|
| 6081 |
reset-mon-cfg { |
| 6082 |
temperature = <115000>; |
| 6083 |
hysteresis = <5000>; |
| 6084 |
type = "passive"; |
| 6085 |
}; |
| 6086 |
|
| 6087 |
cdsp_1_config: junction-config { |
| 6088 |
temperature = <95000>; |
| 6089 |
hysteresis = <5000>; |
| 6090 |
type = "passive"; |
| 6091 |
}; |
| 6092 |
}; |
| 6093 |
}; |
| 6094 |
|
| 6095 |
cdsp2-thermal { |
| 6096 |
polling-delay-passive = <10>; |
| 6097 |
|
| 6098 |
thermal-sensors = <&tsens1 7>; |
| 6099 |
|
| 6100 |
trips { |
| 6101 |
thermal-engine-config { |
| 6102 |
temperature = <125000>; |
| 6103 |
hysteresis = <1000>; |
| 6104 |
type = "passive"; |
| 6105 |
}; |
| 6106 |
|
| 6107 |
thermal-hal-config { |
| 6108 |
temperature = <125000>; |
| 6109 |
hysteresis = <1000>; |
| 6110 |
type = "passive"; |
| 6111 |
}; |
| 6112 |
|
| 6113 |
reset-mon-cfg { |
| 6114 |
temperature = <115000>; |
| 6115 |
hysteresis = <5000>; |
| 6116 |
type = "passive"; |
| 6117 |
}; |
| 6118 |
|
| 6119 |
cdsp_2_config: junction-config { |
| 6120 |
temperature = <95000>; |
| 6121 |
hysteresis = <5000>; |
| 6122 |
type = "passive"; |
| 6123 |
}; |
| 6124 |
}; |
| 6125 |
}; |
| 6126 |
|
| 6127 |
video-thermal { |
| 6128 |
thermal-sensors = <&tsens1 8>; |
| 6129 |
|
| 6130 |
trips { |
| 6131 |
thermal-engine-config { |
| 6132 |
temperature = <125000>; |
| 6133 |
hysteresis = <1000>; |
| 6134 |
type = "passive"; |
| 6135 |
}; |
| 6136 |
|
| 6137 |
reset-mon-cfg { |
| 6138 |
temperature = <115000>; |
| 6139 |
hysteresis = <5000>; |
| 6140 |
type = "passive"; |
| 6141 |
}; |
| 6142 |
}; |
| 6143 |
}; |
| 6144 |
|
| 6145 |
mem-thermal { |
| 6146 |
polling-delay-passive = <10>; |
| 6147 |
|
| 6148 |
thermal-sensors = <&tsens1 9>; |
| 6149 |
|
| 6150 |
trips { |
| 6151 |
thermal-engine-config { |
| 6152 |
temperature = <125000>; |
| 6153 |
hysteresis = <1000>; |
| 6154 |
type = "passive"; |
| 6155 |
}; |
| 6156 |
|
| 6157 |
ddr_config0: ddr0-config { |
| 6158 |
temperature = <90000>; |
| 6159 |
hysteresis = <5000>; |
| 6160 |
type = "passive"; |
| 6161 |
}; |
| 6162 |
|
| 6163 |
reset-mon-cfg { |
| 6164 |
temperature = <115000>; |
| 6165 |
hysteresis = <5000>; |
| 6166 |
type = "passive"; |
| 6167 |
}; |
| 6168 |
}; |
| 6169 |
}; |
| 6170 |
|
| 6171 |
modem0-thermal { |
| 6172 |
thermal-sensors = <&tsens1 10>; |
| 6173 |
|
| 6174 |
trips { |
| 6175 |
thermal-engine-config { |
| 6176 |
temperature = <125000>; |
| 6177 |
hysteresis = <1000>; |
| 6178 |
type = "passive"; |
| 6179 |
}; |
| 6180 |
|
| 6181 |
mdmss0_config0: mdmss0-config0 { |
| 6182 |
temperature = <102000>; |
| 6183 |
hysteresis = <3000>; |
| 6184 |
type = "passive"; |
| 6185 |
}; |
| 6186 |
|
| 6187 |
mdmss0_config1: mdmss0-config1 { |
| 6188 |
temperature = <105000>; |
| 6189 |
hysteresis = <3000>; |
| 6190 |
type = "passive"; |
| 6191 |
}; |
| 6192 |
|
| 6193 |
reset-mon-cfg { |
| 6194 |
temperature = <115000>; |
| 6195 |
hysteresis = <5000>; |
| 6196 |
type = "passive"; |
| 6197 |
}; |
| 6198 |
}; |
| 6199 |
}; |
| 6200 |
|
| 6201 |
modem1-thermal { |
| 6202 |
thermal-sensors = <&tsens1 11>; |
| 6203 |
|
| 6204 |
trips { |
| 6205 |
thermal-engine-config { |
| 6206 |
temperature = <125000>; |
| 6207 |
hysteresis = <1000>; |
| 6208 |
type = "passive"; |
| 6209 |
}; |
| 6210 |
|
| 6211 |
mdmss1_config0: mdmss1-config0 { |
| 6212 |
temperature = <102000>; |
| 6213 |
hysteresis = <3000>; |
| 6214 |
type = "passive"; |
| 6215 |
}; |
| 6216 |
|
| 6217 |
mdmss1_config1: mdmss1-config1 { |
| 6218 |
temperature = <105000>; |
| 6219 |
hysteresis = <3000>; |
| 6220 |
type = "passive"; |
| 6221 |
}; |
| 6222 |
|
| 6223 |
reset-mon-cfg { |
| 6224 |
temperature = <115000>; |
| 6225 |
hysteresis = <5000>; |
| 6226 |
type = "passive"; |
| 6227 |
}; |
| 6228 |
}; |
| 6229 |
}; |
| 6230 |
|
| 6231 |
modem2-thermal { |
| 6232 |
thermal-sensors = <&tsens1 12>; |
| 6233 |
|
| 6234 |
trips { |
| 6235 |
thermal-engine-config { |
| 6236 |
temperature = <125000>; |
| 6237 |
hysteresis = <1000>; |
| 6238 |
type = "passive"; |
| 6239 |
}; |
| 6240 |
|
| 6241 |
mdmss2_config0: mdmss2-config0 { |
| 6242 |
temperature = <102000>; |
| 6243 |
hysteresis = <3000>; |
| 6244 |
type = "passive"; |
| 6245 |
}; |
| 6246 |
|
| 6247 |
mdmss2_config1: mdmss2-config1 { |
| 6248 |
temperature = <105000>; |
| 6249 |
hysteresis = <3000>; |
| 6250 |
type = "passive"; |
| 6251 |
}; |
| 6252 |
|
| 6253 |
reset-mon-cfg { |
| 6254 |
temperature = <115000>; |
| 6255 |
hysteresis = <5000>; |
| 6256 |
type = "passive"; |
| 6257 |
}; |
| 6258 |
}; |
| 6259 |
}; |
| 6260 |
|
| 6261 |
modem3-thermal { |
| 6262 |
thermal-sensors = <&tsens1 13>; |
| 6263 |
|
| 6264 |
trips { |
| 6265 |
thermal-engine-config { |
| 6266 |
temperature = <125000>; |
| 6267 |
hysteresis = <1000>; |
| 6268 |
type = "passive"; |
| 6269 |
}; |
| 6270 |
|
| 6271 |
mdmss3_config0: mdmss3-config0 { |
| 6272 |
temperature = <102000>; |
| 6273 |
hysteresis = <3000>; |
| 6274 |
type = "passive"; |
| 6275 |
}; |
| 6276 |
|
| 6277 |
mdmss3_config1: mdmss3-config1 { |
| 6278 |
temperature = <105000>; |
| 6279 |
hysteresis = <3000>; |
| 6280 |
type = "passive"; |
| 6281 |
}; |
| 6282 |
|
| 6283 |
reset-mon-cfg { |
| 6284 |
temperature = <115000>; |
| 6285 |
hysteresis = <5000>; |
| 6286 |
type = "passive"; |
| 6287 |
}; |
| 6288 |
}; |
| 6289 |
}; |
| 6290 |
|
| 6291 |
camera0-thermal { |
| 6292 |
thermal-sensors = <&tsens1 14>; |
| 6293 |
|
| 6294 |
trips { |
| 6295 |
thermal-engine-config { |
| 6296 |
temperature = <125000>; |
| 6297 |
hysteresis = <1000>; |
| 6298 |
type = "passive"; |
| 6299 |
}; |
| 6300 |
|
| 6301 |
reset-mon-cfg { |
| 6302 |
temperature = <115000>; |
| 6303 |
hysteresis = <5000>; |
| 6304 |
type = "passive"; |
| 6305 |
}; |
| 6306 |
}; |
| 6307 |
}; |
| 6308 |
|
| 6309 |
camera1-thermal { |
| 6310 |
thermal-sensors = <&tsens1 15>; |
| 6311 |
|
| 6312 |
trips { |
| 6313 |
thermal-engine-config { |
| 6314 |
temperature = <125000>; |
| 6315 |
hysteresis = <1000>; |
| 6316 |
type = "passive"; |
| 6317 |
}; |
| 6318 |
|
| 6319 |
reset-mon-cfg { |
| 6320 |
temperature = <115000>; |
| 6321 |
hysteresis = <5000>; |
| 6322 |
type = "passive"; |
| 6323 |
}; |
| 6324 |
}; |
| 6325 |
}; |
| 6326 |
}; |
| 6327 |
|
| 6328 |
timer { |
| 6329 |
compatible = "arm,armv8-timer"; |
| 6330 |
interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, |
| 6331 |
<GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, |
| 6332 |
<GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, |
| 6333 |
<GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>; |
| 6334 |
clock-frequency = <19200000>; |
| 6335 |
}; |
| 6336 |
}; |