| 1 |
// SPDX-License-Identifier: BSD-3-Clause |
| 2 |
/* |
| 3 |
* Copyright (c) 2017-2019, The Linux Foundation. All rights reserved. |
| 4 |
* Copyright (c) 2019, Linaro Limited |
| 5 |
*/ |
| 6 |
|
| 7 |
#include <dt-bindings/dma/qcom-gpi.h> |
| 8 |
#include <dt-bindings/firmware/qcom,scm.h> |
| 9 |
#include <dt-bindings/interrupt-controller/arm-gic.h> |
| 10 |
#include <dt-bindings/phy/phy-qcom-qmp.h> |
| 11 |
#include <dt-bindings/power/qcom-rpmpd.h> |
| 12 |
#include <dt-bindings/soc/qcom,rpmh-rsc.h> |
| 13 |
#include <dt-bindings/clock/qcom,rpmh.h> |
| 14 |
#include <dt-bindings/clock/qcom,dispcc-sm8150.h> |
| 15 |
#include <dt-bindings/clock/qcom,dsi-phy-28nm.h> |
| 16 |
#include <dt-bindings/clock/qcom,gcc-sm8150.h> |
| 17 |
#include <dt-bindings/clock/qcom,gpucc-sm8150.h> |
| 18 |
#include <dt-bindings/clock/qcom,videocc-sm8150.h> |
| 19 |
#include <dt-bindings/interconnect/qcom,osm-l3.h> |
| 20 |
#include <dt-bindings/interconnect/qcom,sm8150.h> |
| 21 |
#include <dt-bindings/clock/qcom,sm8150-camcc.h> |
| 22 |
#include <dt-bindings/thermal/thermal.h> |
| 23 |
|
| 24 |
/ { |
| 25 |
interrupt-parent = <&intc>; |
| 26 |
|
| 27 |
#address-cells = <2>; |
| 28 |
#size-cells = <2>; |
| 29 |
|
| 30 |
chosen { }; |
| 31 |
|
| 32 |
clocks { |
| 33 |
xo_board: xo-board { |
| 34 |
compatible = "fixed-clock"; |
| 35 |
#clock-cells = <0>; |
| 36 |
clock-frequency = <38400000>; |
| 37 |
clock-output-names = "xo_board"; |
| 38 |
}; |
| 39 |
|
| 40 |
sleep_clk: sleep-clk { |
| 41 |
compatible = "fixed-clock"; |
| 42 |
#clock-cells = <0>; |
| 43 |
clock-frequency = <32764>; |
| 44 |
clock-output-names = "sleep_clk"; |
| 45 |
}; |
| 46 |
}; |
| 47 |
|
| 48 |
cpus { |
| 49 |
#address-cells = <2>; |
| 50 |
#size-cells = <0>; |
| 51 |
|
| 52 |
cpu0: cpu@0 { |
| 53 |
device_type = "cpu"; |
| 54 |
compatible = "qcom,kryo485"; |
| 55 |
reg = <0x0 0x0>; |
| 56 |
clocks = <&cpufreq_hw 0>; |
| 57 |
enable-method = "psci"; |
| 58 |
capacity-dmips-mhz = <488>; |
| 59 |
dynamic-power-coefficient = <232>; |
| 60 |
next-level-cache = <&l2_0>; |
| 61 |
qcom,freq-domain = <&cpufreq_hw 0>; |
| 62 |
operating-points-v2 = <&cpu0_opp_table>; |
| 63 |
interconnects = <&gem_noc MASTER_AMPSS_M0 0 &mc_virt SLAVE_EBI_CH0 0>, |
| 64 |
<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>; |
| 65 |
power-domains = <&cpu_pd0>; |
| 66 |
power-domain-names = "psci"; |
| 67 |
#cooling-cells = <2>; |
| 68 |
l2_0: l2-cache { |
| 69 |
compatible = "cache"; |
| 70 |
cache-level = <2>; |
| 71 |
cache-unified; |
| 72 |
next-level-cache = <&l3_0>; |
| 73 |
l3_0: l3-cache { |
| 74 |
compatible = "cache"; |
| 75 |
cache-level = <3>; |
| 76 |
cache-unified; |
| 77 |
}; |
| 78 |
}; |
| 79 |
}; |
| 80 |
|
| 81 |
cpu1: cpu@100 { |
| 82 |
device_type = "cpu"; |
| 83 |
compatible = "qcom,kryo485"; |
| 84 |
reg = <0x0 0x100>; |
| 85 |
clocks = <&cpufreq_hw 0>; |
| 86 |
enable-method = "psci"; |
| 87 |
capacity-dmips-mhz = <488>; |
| 88 |
dynamic-power-coefficient = <232>; |
| 89 |
next-level-cache = <&l2_100>; |
| 90 |
qcom,freq-domain = <&cpufreq_hw 0>; |
| 91 |
operating-points-v2 = <&cpu0_opp_table>; |
| 92 |
interconnects = <&gem_noc MASTER_AMPSS_M0 0 &mc_virt SLAVE_EBI_CH0 0>, |
| 93 |
<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>; |
| 94 |
power-domains = <&cpu_pd1>; |
| 95 |
power-domain-names = "psci"; |
| 96 |
#cooling-cells = <2>; |
| 97 |
l2_100: l2-cache { |
| 98 |
compatible = "cache"; |
| 99 |
cache-level = <2>; |
| 100 |
cache-unified; |
| 101 |
next-level-cache = <&l3_0>; |
| 102 |
}; |
| 103 |
}; |
| 104 |
|
| 105 |
cpu2: cpu@200 { |
| 106 |
device_type = "cpu"; |
| 107 |
compatible = "qcom,kryo485"; |
| 108 |
reg = <0x0 0x200>; |
| 109 |
clocks = <&cpufreq_hw 0>; |
| 110 |
enable-method = "psci"; |
| 111 |
capacity-dmips-mhz = <488>; |
| 112 |
dynamic-power-coefficient = <232>; |
| 113 |
next-level-cache = <&l2_200>; |
| 114 |
qcom,freq-domain = <&cpufreq_hw 0>; |
| 115 |
operating-points-v2 = <&cpu0_opp_table>; |
| 116 |
interconnects = <&gem_noc MASTER_AMPSS_M0 0 &mc_virt SLAVE_EBI_CH0 0>, |
| 117 |
<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>; |
| 118 |
power-domains = <&cpu_pd2>; |
| 119 |
power-domain-names = "psci"; |
| 120 |
#cooling-cells = <2>; |
| 121 |
l2_200: l2-cache { |
| 122 |
compatible = "cache"; |
| 123 |
cache-level = <2>; |
| 124 |
cache-unified; |
| 125 |
next-level-cache = <&l3_0>; |
| 126 |
}; |
| 127 |
}; |
| 128 |
|
| 129 |
cpu3: cpu@300 { |
| 130 |
device_type = "cpu"; |
| 131 |
compatible = "qcom,kryo485"; |
| 132 |
reg = <0x0 0x300>; |
| 133 |
clocks = <&cpufreq_hw 0>; |
| 134 |
enable-method = "psci"; |
| 135 |
capacity-dmips-mhz = <488>; |
| 136 |
dynamic-power-coefficient = <232>; |
| 137 |
next-level-cache = <&l2_300>; |
| 138 |
qcom,freq-domain = <&cpufreq_hw 0>; |
| 139 |
operating-points-v2 = <&cpu0_opp_table>; |
| 140 |
interconnects = <&gem_noc MASTER_AMPSS_M0 0 &mc_virt SLAVE_EBI_CH0 0>, |
| 141 |
<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>; |
| 142 |
power-domains = <&cpu_pd3>; |
| 143 |
power-domain-names = "psci"; |
| 144 |
#cooling-cells = <2>; |
| 145 |
l2_300: l2-cache { |
| 146 |
compatible = "cache"; |
| 147 |
cache-level = <2>; |
| 148 |
cache-unified; |
| 149 |
next-level-cache = <&l3_0>; |
| 150 |
}; |
| 151 |
}; |
| 152 |
|
| 153 |
cpu4: cpu@400 { |
| 154 |
device_type = "cpu"; |
| 155 |
compatible = "qcom,kryo485"; |
| 156 |
reg = <0x0 0x400>; |
| 157 |
clocks = <&cpufreq_hw 1>; |
| 158 |
enable-method = "psci"; |
| 159 |
capacity-dmips-mhz = <1024>; |
| 160 |
dynamic-power-coefficient = <369>; |
| 161 |
next-level-cache = <&l2_400>; |
| 162 |
qcom,freq-domain = <&cpufreq_hw 1>; |
| 163 |
operating-points-v2 = <&cpu4_opp_table>; |
| 164 |
interconnects = <&gem_noc MASTER_AMPSS_M0 0 &mc_virt SLAVE_EBI_CH0 0>, |
| 165 |
<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>; |
| 166 |
power-domains = <&cpu_pd4>; |
| 167 |
power-domain-names = "psci"; |
| 168 |
#cooling-cells = <2>; |
| 169 |
l2_400: l2-cache { |
| 170 |
compatible = "cache"; |
| 171 |
cache-level = <2>; |
| 172 |
cache-unified; |
| 173 |
next-level-cache = <&l3_0>; |
| 174 |
}; |
| 175 |
}; |
| 176 |
|
| 177 |
cpu5: cpu@500 { |
| 178 |
device_type = "cpu"; |
| 179 |
compatible = "qcom,kryo485"; |
| 180 |
reg = <0x0 0x500>; |
| 181 |
clocks = <&cpufreq_hw 1>; |
| 182 |
enable-method = "psci"; |
| 183 |
capacity-dmips-mhz = <1024>; |
| 184 |
dynamic-power-coefficient = <369>; |
| 185 |
next-level-cache = <&l2_500>; |
| 186 |
qcom,freq-domain = <&cpufreq_hw 1>; |
| 187 |
operating-points-v2 = <&cpu4_opp_table>; |
| 188 |
interconnects = <&gem_noc MASTER_AMPSS_M0 0 &mc_virt SLAVE_EBI_CH0 0>, |
| 189 |
<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>; |
| 190 |
power-domains = <&cpu_pd5>; |
| 191 |
power-domain-names = "psci"; |
| 192 |
#cooling-cells = <2>; |
| 193 |
l2_500: l2-cache { |
| 194 |
compatible = "cache"; |
| 195 |
cache-level = <2>; |
| 196 |
cache-unified; |
| 197 |
next-level-cache = <&l3_0>; |
| 198 |
}; |
| 199 |
}; |
| 200 |
|
| 201 |
cpu6: cpu@600 { |
| 202 |
device_type = "cpu"; |
| 203 |
compatible = "qcom,kryo485"; |
| 204 |
reg = <0x0 0x600>; |
| 205 |
clocks = <&cpufreq_hw 1>; |
| 206 |
enable-method = "psci"; |
| 207 |
capacity-dmips-mhz = <1024>; |
| 208 |
dynamic-power-coefficient = <369>; |
| 209 |
next-level-cache = <&l2_600>; |
| 210 |
qcom,freq-domain = <&cpufreq_hw 1>; |
| 211 |
operating-points-v2 = <&cpu4_opp_table>; |
| 212 |
interconnects = <&gem_noc MASTER_AMPSS_M0 0 &mc_virt SLAVE_EBI_CH0 0>, |
| 213 |
<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>; |
| 214 |
power-domains = <&cpu_pd6>; |
| 215 |
power-domain-names = "psci"; |
| 216 |
#cooling-cells = <2>; |
| 217 |
l2_600: l2-cache { |
| 218 |
compatible = "cache"; |
| 219 |
cache-level = <2>; |
| 220 |
cache-unified; |
| 221 |
next-level-cache = <&l3_0>; |
| 222 |
}; |
| 223 |
}; |
| 224 |
|
| 225 |
cpu7: cpu@700 { |
| 226 |
device_type = "cpu"; |
| 227 |
compatible = "qcom,kryo485"; |
| 228 |
reg = <0x0 0x700>; |
| 229 |
clocks = <&cpufreq_hw 2>; |
| 230 |
enable-method = "psci"; |
| 231 |
capacity-dmips-mhz = <1024>; |
| 232 |
dynamic-power-coefficient = <421>; |
| 233 |
next-level-cache = <&l2_700>; |
| 234 |
qcom,freq-domain = <&cpufreq_hw 2>; |
| 235 |
operating-points-v2 = <&cpu7_opp_table>; |
| 236 |
interconnects = <&gem_noc MASTER_AMPSS_M0 0 &mc_virt SLAVE_EBI_CH0 0>, |
| 237 |
<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>; |
| 238 |
power-domains = <&cpu_pd7>; |
| 239 |
power-domain-names = "psci"; |
| 240 |
#cooling-cells = <2>; |
| 241 |
l2_700: l2-cache { |
| 242 |
compatible = "cache"; |
| 243 |
cache-level = <2>; |
| 244 |
cache-unified; |
| 245 |
next-level-cache = <&l3_0>; |
| 246 |
}; |
| 247 |
}; |
| 248 |
|
| 249 |
cpu-map { |
| 250 |
cluster0 { |
| 251 |
core0 { |
| 252 |
cpu = <&cpu0>; |
| 253 |
}; |
| 254 |
|
| 255 |
core1 { |
| 256 |
cpu = <&cpu1>; |
| 257 |
}; |
| 258 |
|
| 259 |
core2 { |
| 260 |
cpu = <&cpu2>; |
| 261 |
}; |
| 262 |
|
| 263 |
core3 { |
| 264 |
cpu = <&cpu3>; |
| 265 |
}; |
| 266 |
|
| 267 |
core4 { |
| 268 |
cpu = <&cpu4>; |
| 269 |
}; |
| 270 |
|
| 271 |
core5 { |
| 272 |
cpu = <&cpu5>; |
| 273 |
}; |
| 274 |
|
| 275 |
core6 { |
| 276 |
cpu = <&cpu6>; |
| 277 |
}; |
| 278 |
|
| 279 |
core7 { |
| 280 |
cpu = <&cpu7>; |
| 281 |
}; |
| 282 |
}; |
| 283 |
}; |
| 284 |
|
| 285 |
idle-states { |
| 286 |
entry-method = "psci"; |
| 287 |
|
| 288 |
little_cpu_sleep_0: cpu-sleep-0-0 { |
| 289 |
compatible = "arm,idle-state"; |
| 290 |
idle-state-name = "little-rail-power-collapse"; |
| 291 |
arm,psci-suspend-param = <0x40000004>; |
| 292 |
entry-latency-us = <355>; |
| 293 |
exit-latency-us = <909>; |
| 294 |
min-residency-us = <3934>; |
| 295 |
local-timer-stop; |
| 296 |
}; |
| 297 |
|
| 298 |
big_cpu_sleep_0: cpu-sleep-1-0 { |
| 299 |
compatible = "arm,idle-state"; |
| 300 |
idle-state-name = "big-rail-power-collapse"; |
| 301 |
arm,psci-suspend-param = <0x40000004>; |
| 302 |
entry-latency-us = <241>; |
| 303 |
exit-latency-us = <1461>; |
| 304 |
min-residency-us = <4488>; |
| 305 |
local-timer-stop; |
| 306 |
}; |
| 307 |
}; |
| 308 |
|
| 309 |
domain-idle-states { |
| 310 |
cluster_sleep_0: cluster-sleep-0 { |
| 311 |
compatible = "domain-idle-state"; |
| 312 |
arm,psci-suspend-param = <0x4100c244>; |
| 313 |
entry-latency-us = <3263>; |
| 314 |
exit-latency-us = <6562>; |
| 315 |
min-residency-us = <9987>; |
| 316 |
}; |
| 317 |
}; |
| 318 |
}; |
| 319 |
|
| 320 |
cpu0_opp_table: opp-table-cpu0 { |
| 321 |
compatible = "operating-points-v2"; |
| 322 |
opp-shared; |
| 323 |
|
| 324 |
cpu0_opp1: opp-300000000 { |
| 325 |
opp-hz = /bits/ 64 <300000000>; |
| 326 |
opp-peak-kBps = <800000 9600000>; |
| 327 |
}; |
| 328 |
|
| 329 |
cpu0_opp2: opp-403200000 { |
| 330 |
opp-hz = /bits/ 64 <403200000>; |
| 331 |
opp-peak-kBps = <800000 9600000>; |
| 332 |
}; |
| 333 |
|
| 334 |
cpu0_opp3: opp-499200000 { |
| 335 |
opp-hz = /bits/ 64 <499200000>; |
| 336 |
opp-peak-kBps = <800000 12902400>; |
| 337 |
}; |
| 338 |
|
| 339 |
cpu0_opp4: opp-576000000 { |
| 340 |
opp-hz = /bits/ 64 <576000000>; |
| 341 |
opp-peak-kBps = <800000 12902400>; |
| 342 |
}; |
| 343 |
|
| 344 |
cpu0_opp5: opp-672000000 { |
| 345 |
opp-hz = /bits/ 64 <672000000>; |
| 346 |
opp-peak-kBps = <800000 15974400>; |
| 347 |
}; |
| 348 |
|
| 349 |
cpu0_opp6: opp-768000000 { |
| 350 |
opp-hz = /bits/ 64 <768000000>; |
| 351 |
opp-peak-kBps = <1804000 19660800>; |
| 352 |
}; |
| 353 |
|
| 354 |
cpu0_opp7: opp-844800000 { |
| 355 |
opp-hz = /bits/ 64 <844800000>; |
| 356 |
opp-peak-kBps = <1804000 19660800>; |
| 357 |
}; |
| 358 |
|
| 359 |
cpu0_opp8: opp-940800000 { |
| 360 |
opp-hz = /bits/ 64 <940800000>; |
| 361 |
opp-peak-kBps = <1804000 22732800>; |
| 362 |
}; |
| 363 |
|
| 364 |
cpu0_opp9: opp-1036800000 { |
| 365 |
opp-hz = /bits/ 64 <1036800000>; |
| 366 |
opp-peak-kBps = <1804000 22732800>; |
| 367 |
}; |
| 368 |
|
| 369 |
cpu0_opp10: opp-1113600000 { |
| 370 |
opp-hz = /bits/ 64 <1113600000>; |
| 371 |
opp-peak-kBps = <2188000 25804800>; |
| 372 |
}; |
| 373 |
|
| 374 |
cpu0_opp11: opp-1209600000 { |
| 375 |
opp-hz = /bits/ 64 <1209600000>; |
| 376 |
opp-peak-kBps = <2188000 31948800>; |
| 377 |
}; |
| 378 |
|
| 379 |
cpu0_opp12: opp-1305600000 { |
| 380 |
opp-hz = /bits/ 64 <1305600000>; |
| 381 |
opp-peak-kBps = <3072000 31948800>; |
| 382 |
}; |
| 383 |
|
| 384 |
cpu0_opp13: opp-1382400000 { |
| 385 |
opp-hz = /bits/ 64 <1382400000>; |
| 386 |
opp-peak-kBps = <3072000 31948800>; |
| 387 |
}; |
| 388 |
|
| 389 |
cpu0_opp14: opp-1478400000 { |
| 390 |
opp-hz = /bits/ 64 <1478400000>; |
| 391 |
opp-peak-kBps = <3072000 31948800>; |
| 392 |
}; |
| 393 |
|
| 394 |
cpu0_opp15: opp-1555200000 { |
| 395 |
opp-hz = /bits/ 64 <1555200000>; |
| 396 |
opp-peak-kBps = <3072000 40550400>; |
| 397 |
}; |
| 398 |
|
| 399 |
cpu0_opp16: opp-1632000000 { |
| 400 |
opp-hz = /bits/ 64 <1632000000>; |
| 401 |
opp-peak-kBps = <3072000 40550400>; |
| 402 |
}; |
| 403 |
|
| 404 |
cpu0_opp17: opp-1708800000 { |
| 405 |
opp-hz = /bits/ 64 <1708800000>; |
| 406 |
opp-peak-kBps = <3072000 43008000>; |
| 407 |
}; |
| 408 |
|
| 409 |
cpu0_opp18: opp-1785600000 { |
| 410 |
opp-hz = /bits/ 64 <1785600000>; |
| 411 |
opp-peak-kBps = <3072000 43008000>; |
| 412 |
}; |
| 413 |
}; |
| 414 |
|
| 415 |
cpu4_opp_table: opp-table-cpu4 { |
| 416 |
compatible = "operating-points-v2"; |
| 417 |
opp-shared; |
| 418 |
|
| 419 |
cpu4_opp1: opp-710400000 { |
| 420 |
opp-hz = /bits/ 64 <710400000>; |
| 421 |
opp-peak-kBps = <1804000 15974400>; |
| 422 |
}; |
| 423 |
|
| 424 |
cpu4_opp2: opp-825600000 { |
| 425 |
opp-hz = /bits/ 64 <825600000>; |
| 426 |
opp-peak-kBps = <2188000 19660800>; |
| 427 |
}; |
| 428 |
|
| 429 |
cpu4_opp3: opp-940800000 { |
| 430 |
opp-hz = /bits/ 64 <940800000>; |
| 431 |
opp-peak-kBps = <2188000 22732800>; |
| 432 |
}; |
| 433 |
|
| 434 |
cpu4_opp4: opp-1056000000 { |
| 435 |
opp-hz = /bits/ 64 <1056000000>; |
| 436 |
opp-peak-kBps = <3072000 25804800>; |
| 437 |
}; |
| 438 |
|
| 439 |
cpu4_opp5: opp-1171200000 { |
| 440 |
opp-hz = /bits/ 64 <1171200000>; |
| 441 |
opp-peak-kBps = <3072000 31948800>; |
| 442 |
}; |
| 443 |
|
| 444 |
cpu4_opp6: opp-1286400000 { |
| 445 |
opp-hz = /bits/ 64 <1286400000>; |
| 446 |
opp-peak-kBps = <4068000 31948800>; |
| 447 |
}; |
| 448 |
|
| 449 |
cpu4_opp7: opp-1401600000 { |
| 450 |
opp-hz = /bits/ 64 <1401600000>; |
| 451 |
opp-peak-kBps = <4068000 31948800>; |
| 452 |
}; |
| 453 |
|
| 454 |
cpu4_opp8: opp-1497600000 { |
| 455 |
opp-hz = /bits/ 64 <1497600000>; |
| 456 |
opp-peak-kBps = <4068000 40550400>; |
| 457 |
}; |
| 458 |
|
| 459 |
cpu4_opp9: opp-1612800000 { |
| 460 |
opp-hz = /bits/ 64 <1612800000>; |
| 461 |
opp-peak-kBps = <4068000 40550400>; |
| 462 |
}; |
| 463 |
|
| 464 |
cpu4_opp10: opp-1708800000 { |
| 465 |
opp-hz = /bits/ 64 <1708800000>; |
| 466 |
opp-peak-kBps = <4068000 43008000>; |
| 467 |
}; |
| 468 |
|
| 469 |
cpu4_opp11: opp-1804800000 { |
| 470 |
opp-hz = /bits/ 64 <1804800000>; |
| 471 |
opp-peak-kBps = <6220000 43008000>; |
| 472 |
}; |
| 473 |
|
| 474 |
cpu4_opp12: opp-1920000000 { |
| 475 |
opp-hz = /bits/ 64 <1920000000>; |
| 476 |
opp-peak-kBps = <6220000 49152000>; |
| 477 |
}; |
| 478 |
|
| 479 |
cpu4_opp13: opp-2016000000 { |
| 480 |
opp-hz = /bits/ 64 <2016000000>; |
| 481 |
opp-peak-kBps = <7216000 49152000>; |
| 482 |
}; |
| 483 |
|
| 484 |
cpu4_opp14: opp-2131200000 { |
| 485 |
opp-hz = /bits/ 64 <2131200000>; |
| 486 |
opp-peak-kBps = <8368000 49152000>; |
| 487 |
}; |
| 488 |
|
| 489 |
cpu4_opp15: opp-2227200000 { |
| 490 |
opp-hz = /bits/ 64 <2227200000>; |
| 491 |
opp-peak-kBps = <8368000 51609600>; |
| 492 |
}; |
| 493 |
|
| 494 |
cpu4_opp16: opp-2323200000 { |
| 495 |
opp-hz = /bits/ 64 <2323200000>; |
| 496 |
opp-peak-kBps = <8368000 51609600>; |
| 497 |
}; |
| 498 |
|
| 499 |
cpu4_opp17: opp-2419200000 { |
| 500 |
opp-hz = /bits/ 64 <2419200000>; |
| 501 |
opp-peak-kBps = <8368000 51609600>; |
| 502 |
}; |
| 503 |
}; |
| 504 |
|
| 505 |
cpu7_opp_table: opp-table-cpu7 { |
| 506 |
compatible = "operating-points-v2"; |
| 507 |
opp-shared; |
| 508 |
|
| 509 |
cpu7_opp1: opp-825600000 { |
| 510 |
opp-hz = /bits/ 64 <825600000>; |
| 511 |
opp-peak-kBps = <2188000 19660800>; |
| 512 |
}; |
| 513 |
|
| 514 |
cpu7_opp2: opp-940800000 { |
| 515 |
opp-hz = /bits/ 64 <940800000>; |
| 516 |
opp-peak-kBps = <2188000 22732800>; |
| 517 |
}; |
| 518 |
|
| 519 |
cpu7_opp3: opp-1056000000 { |
| 520 |
opp-hz = /bits/ 64 <1056000000>; |
| 521 |
opp-peak-kBps = <3072000 25804800>; |
| 522 |
}; |
| 523 |
|
| 524 |
cpu7_opp4: opp-1171200000 { |
| 525 |
opp-hz = /bits/ 64 <1171200000>; |
| 526 |
opp-peak-kBps = <3072000 31948800>; |
| 527 |
}; |
| 528 |
|
| 529 |
cpu7_opp5: opp-1286400000 { |
| 530 |
opp-hz = /bits/ 64 <1286400000>; |
| 531 |
opp-peak-kBps = <4068000 31948800>; |
| 532 |
}; |
| 533 |
|
| 534 |
cpu7_opp6: opp-1401600000 { |
| 535 |
opp-hz = /bits/ 64 <1401600000>; |
| 536 |
opp-peak-kBps = <4068000 31948800>; |
| 537 |
}; |
| 538 |
|
| 539 |
cpu7_opp7: opp-1497600000 { |
| 540 |
opp-hz = /bits/ 64 <1497600000>; |
| 541 |
opp-peak-kBps = <4068000 40550400>; |
| 542 |
}; |
| 543 |
|
| 544 |
cpu7_opp8: opp-1612800000 { |
| 545 |
opp-hz = /bits/ 64 <1612800000>; |
| 546 |
opp-peak-kBps = <4068000 40550400>; |
| 547 |
}; |
| 548 |
|
| 549 |
cpu7_opp9: opp-1708800000 { |
| 550 |
opp-hz = /bits/ 64 <1708800000>; |
| 551 |
opp-peak-kBps = <4068000 43008000>; |
| 552 |
}; |
| 553 |
|
| 554 |
cpu7_opp10: opp-1804800000 { |
| 555 |
opp-hz = /bits/ 64 <1804800000>; |
| 556 |
opp-peak-kBps = <6220000 43008000>; |
| 557 |
}; |
| 558 |
|
| 559 |
cpu7_opp11: opp-1920000000 { |
| 560 |
opp-hz = /bits/ 64 <1920000000>; |
| 561 |
opp-peak-kBps = <6220000 49152000>; |
| 562 |
}; |
| 563 |
|
| 564 |
cpu7_opp12: opp-2016000000 { |
| 565 |
opp-hz = /bits/ 64 <2016000000>; |
| 566 |
opp-peak-kBps = <7216000 49152000>; |
| 567 |
}; |
| 568 |
|
| 569 |
cpu7_opp13: opp-2131200000 { |
| 570 |
opp-hz = /bits/ 64 <2131200000>; |
| 571 |
opp-peak-kBps = <8368000 49152000>; |
| 572 |
}; |
| 573 |
|
| 574 |
cpu7_opp14: opp-2227200000 { |
| 575 |
opp-hz = /bits/ 64 <2227200000>; |
| 576 |
opp-peak-kBps = <8368000 51609600>; |
| 577 |
}; |
| 578 |
|
| 579 |
cpu7_opp15: opp-2323200000 { |
| 580 |
opp-hz = /bits/ 64 <2323200000>; |
| 581 |
opp-peak-kBps = <8368000 51609600>; |
| 582 |
}; |
| 583 |
|
| 584 |
cpu7_opp16: opp-2419200000 { |
| 585 |
opp-hz = /bits/ 64 <2419200000>; |
| 586 |
opp-peak-kBps = <8368000 51609600>; |
| 587 |
}; |
| 588 |
|
| 589 |
cpu7_opp17: opp-2534400000 { |
| 590 |
opp-hz = /bits/ 64 <2534400000>; |
| 591 |
opp-peak-kBps = <8368000 51609600>; |
| 592 |
}; |
| 593 |
|
| 594 |
cpu7_opp18: opp-2649600000 { |
| 595 |
opp-hz = /bits/ 64 <2649600000>; |
| 596 |
opp-peak-kBps = <8368000 51609600>; |
| 597 |
}; |
| 598 |
|
| 599 |
cpu7_opp19: opp-2745600000 { |
| 600 |
opp-hz = /bits/ 64 <2745600000>; |
| 601 |
opp-peak-kBps = <8368000 51609600>; |
| 602 |
}; |
| 603 |
|
| 604 |
cpu7_opp20: opp-2841600000 { |
| 605 |
opp-hz = /bits/ 64 <2841600000>; |
| 606 |
opp-peak-kBps = <8368000 51609600>; |
| 607 |
}; |
| 608 |
}; |
| 609 |
|
| 610 |
firmware { |
| 611 |
scm: scm { |
| 612 |
compatible = "qcom,scm-sm8150", "qcom,scm"; |
| 613 |
#reset-cells = <1>; |
| 614 |
}; |
| 615 |
}; |
| 616 |
|
| 617 |
memory@80000000 { |
| 618 |
device_type = "memory"; |
| 619 |
/* We expect the bootloader to fill in the size */ |
| 620 |
reg = <0x0 0x80000000 0x0 0x0>; |
| 621 |
}; |
| 622 |
|
| 623 |
pmu { |
| 624 |
compatible = "arm,armv8-pmuv3"; |
| 625 |
interrupts = <GIC_PPI 5 IRQ_TYPE_LEVEL_HIGH>; |
| 626 |
}; |
| 627 |
|
| 628 |
psci { |
| 629 |
compatible = "arm,psci-1.0"; |
| 630 |
method = "smc"; |
| 631 |
|
| 632 |
cpu_pd0: power-domain-cpu0 { |
| 633 |
#power-domain-cells = <0>; |
| 634 |
power-domains = <&cluster_pd>; |
| 635 |
domain-idle-states = <&little_cpu_sleep_0>; |
| 636 |
}; |
| 637 |
|
| 638 |
cpu_pd1: power-domain-cpu1 { |
| 639 |
#power-domain-cells = <0>; |
| 640 |
power-domains = <&cluster_pd>; |
| 641 |
domain-idle-states = <&little_cpu_sleep_0>; |
| 642 |
}; |
| 643 |
|
| 644 |
cpu_pd2: power-domain-cpu2 { |
| 645 |
#power-domain-cells = <0>; |
| 646 |
power-domains = <&cluster_pd>; |
| 647 |
domain-idle-states = <&little_cpu_sleep_0>; |
| 648 |
}; |
| 649 |
|
| 650 |
cpu_pd3: power-domain-cpu3 { |
| 651 |
#power-domain-cells = <0>; |
| 652 |
power-domains = <&cluster_pd>; |
| 653 |
domain-idle-states = <&little_cpu_sleep_0>; |
| 654 |
}; |
| 655 |
|
| 656 |
cpu_pd4: power-domain-cpu4 { |
| 657 |
#power-domain-cells = <0>; |
| 658 |
power-domains = <&cluster_pd>; |
| 659 |
domain-idle-states = <&big_cpu_sleep_0>; |
| 660 |
}; |
| 661 |
|
| 662 |
cpu_pd5: power-domain-cpu5 { |
| 663 |
#power-domain-cells = <0>; |
| 664 |
power-domains = <&cluster_pd>; |
| 665 |
domain-idle-states = <&big_cpu_sleep_0>; |
| 666 |
}; |
| 667 |
|
| 668 |
cpu_pd6: power-domain-cpu6 { |
| 669 |
#power-domain-cells = <0>; |
| 670 |
power-domains = <&cluster_pd>; |
| 671 |
domain-idle-states = <&big_cpu_sleep_0>; |
| 672 |
}; |
| 673 |
|
| 674 |
cpu_pd7: power-domain-cpu7 { |
| 675 |
#power-domain-cells = <0>; |
| 676 |
power-domains = <&cluster_pd>; |
| 677 |
domain-idle-states = <&big_cpu_sleep_0>; |
| 678 |
}; |
| 679 |
|
| 680 |
cluster_pd: power-domain-cpu-cluster0 { |
| 681 |
#power-domain-cells = <0>; |
| 682 |
domain-idle-states = <&cluster_sleep_0>; |
| 683 |
}; |
| 684 |
}; |
| 685 |
|
| 686 |
reserved-memory { |
| 687 |
#address-cells = <2>; |
| 688 |
#size-cells = <2>; |
| 689 |
ranges; |
| 690 |
|
| 691 |
hyp_mem: memory@85700000 { |
| 692 |
reg = <0x0 0x85700000 0x0 0x600000>; |
| 693 |
no-map; |
| 694 |
}; |
| 695 |
|
| 696 |
xbl_mem: memory@85d00000 { |
| 697 |
reg = <0x0 0x85d00000 0x0 0x140000>; |
| 698 |
no-map; |
| 699 |
}; |
| 700 |
|
| 701 |
aop_mem: memory@85f00000 { |
| 702 |
reg = <0x0 0x85f00000 0x0 0x20000>; |
| 703 |
no-map; |
| 704 |
}; |
| 705 |
|
| 706 |
aop_cmd_db: memory@85f20000 { |
| 707 |
compatible = "qcom,cmd-db"; |
| 708 |
reg = <0x0 0x85f20000 0x0 0x20000>; |
| 709 |
no-map; |
| 710 |
}; |
| 711 |
|
| 712 |
smem_mem: memory@86000000 { |
| 713 |
reg = <0x0 0x86000000 0x0 0x200000>; |
| 714 |
no-map; |
| 715 |
}; |
| 716 |
|
| 717 |
tz_mem: memory@86200000 { |
| 718 |
reg = <0x0 0x86200000 0x0 0x3900000>; |
| 719 |
no-map; |
| 720 |
}; |
| 721 |
|
| 722 |
rmtfs_mem: memory@89b00000 { |
| 723 |
compatible = "qcom,rmtfs-mem"; |
| 724 |
reg = <0x0 0x89b00000 0x0 0x200000>; |
| 725 |
no-map; |
| 726 |
|
| 727 |
qcom,client-id = <1>; |
| 728 |
qcom,vmid = <QCOM_SCM_VMID_MSS_MSA>; |
| 729 |
}; |
| 730 |
|
| 731 |
camera_mem: memory@8b700000 { |
| 732 |
reg = <0x0 0x8b700000 0x0 0x500000>; |
| 733 |
no-map; |
| 734 |
}; |
| 735 |
|
| 736 |
wlan_mem: memory@8bc00000 { |
| 737 |
reg = <0x0 0x8bc00000 0x0 0x180000>; |
| 738 |
no-map; |
| 739 |
}; |
| 740 |
|
| 741 |
npu_mem: memory@8bd80000 { |
| 742 |
reg = <0x0 0x8bd80000 0x0 0x80000>; |
| 743 |
no-map; |
| 744 |
}; |
| 745 |
|
| 746 |
adsp_mem: memory@8be00000 { |
| 747 |
reg = <0x0 0x8be00000 0x0 0x1a00000>; |
| 748 |
no-map; |
| 749 |
}; |
| 750 |
|
| 751 |
mpss_mem: memory@8d800000 { |
| 752 |
reg = <0x0 0x8d800000 0x0 0x9600000>; |
| 753 |
no-map; |
| 754 |
}; |
| 755 |
|
| 756 |
venus_mem: memory@96e00000 { |
| 757 |
reg = <0x0 0x96e00000 0x0 0x500000>; |
| 758 |
no-map; |
| 759 |
}; |
| 760 |
|
| 761 |
slpi_mem: memory@97300000 { |
| 762 |
reg = <0x0 0x97300000 0x0 0x1400000>; |
| 763 |
no-map; |
| 764 |
}; |
| 765 |
|
| 766 |
ipa_fw_mem: memory@98700000 { |
| 767 |
reg = <0x0 0x98700000 0x0 0x10000>; |
| 768 |
no-map; |
| 769 |
}; |
| 770 |
|
| 771 |
ipa_gsi_mem: memory@98710000 { |
| 772 |
reg = <0x0 0x98710000 0x0 0x5000>; |
| 773 |
no-map; |
| 774 |
}; |
| 775 |
|
| 776 |
gpu_mem: memory@98715000 { |
| 777 |
reg = <0x0 0x98715000 0x0 0x2000>; |
| 778 |
no-map; |
| 779 |
}; |
| 780 |
|
| 781 |
spss_mem: memory@98800000 { |
| 782 |
reg = <0x0 0x98800000 0x0 0x100000>; |
| 783 |
no-map; |
| 784 |
}; |
| 785 |
|
| 786 |
cdsp_mem: memory@98900000 { |
| 787 |
reg = <0x0 0x98900000 0x0 0x1400000>; |
| 788 |
no-map; |
| 789 |
}; |
| 790 |
|
| 791 |
qseecom_mem: memory@9e400000 { |
| 792 |
reg = <0x0 0x9e400000 0x0 0x1400000>; |
| 793 |
no-map; |
| 794 |
}; |
| 795 |
}; |
| 796 |
|
| 797 |
smem { |
| 798 |
compatible = "qcom,smem"; |
| 799 |
memory-region = <&smem_mem>; |
| 800 |
hwlocks = <&tcsr_mutex 3>; |
| 801 |
}; |
| 802 |
|
| 803 |
smp2p-cdsp { |
| 804 |
compatible = "qcom,smp2p"; |
| 805 |
qcom,smem = <94>, <432>; |
| 806 |
|
| 807 |
interrupts = <GIC_SPI 576 IRQ_TYPE_EDGE_RISING>; |
| 808 |
|
| 809 |
mboxes = <&apss_shared 6>; |
| 810 |
|
| 811 |
qcom,local-pid = <0>; |
| 812 |
qcom,remote-pid = <5>; |
| 813 |
|
| 814 |
cdsp_smp2p_out: master-kernel { |
| 815 |
qcom,entry-name = "master-kernel"; |
| 816 |
#qcom,smem-state-cells = <1>; |
| 817 |
}; |
| 818 |
|
| 819 |
cdsp_smp2p_in: slave-kernel { |
| 820 |
qcom,entry-name = "slave-kernel"; |
| 821 |
|
| 822 |
interrupt-controller; |
| 823 |
#interrupt-cells = <2>; |
| 824 |
}; |
| 825 |
}; |
| 826 |
|
| 827 |
smp2p-lpass { |
| 828 |
compatible = "qcom,smp2p"; |
| 829 |
qcom,smem = <443>, <429>; |
| 830 |
|
| 831 |
interrupts = <GIC_SPI 158 IRQ_TYPE_EDGE_RISING>; |
| 832 |
|
| 833 |
mboxes = <&apss_shared 10>; |
| 834 |
|
| 835 |
qcom,local-pid = <0>; |
| 836 |
qcom,remote-pid = <2>; |
| 837 |
|
| 838 |
adsp_smp2p_out: master-kernel { |
| 839 |
qcom,entry-name = "master-kernel"; |
| 840 |
#qcom,smem-state-cells = <1>; |
| 841 |
}; |
| 842 |
|
| 843 |
adsp_smp2p_in: slave-kernel { |
| 844 |
qcom,entry-name = "slave-kernel"; |
| 845 |
|
| 846 |
interrupt-controller; |
| 847 |
#interrupt-cells = <2>; |
| 848 |
}; |
| 849 |
}; |
| 850 |
|
| 851 |
smp2p-mpss { |
| 852 |
compatible = "qcom,smp2p"; |
| 853 |
qcom,smem = <435>, <428>; |
| 854 |
|
| 855 |
interrupts = <GIC_SPI 451 IRQ_TYPE_EDGE_RISING>; |
| 856 |
|
| 857 |
mboxes = <&apss_shared 14>; |
| 858 |
|
| 859 |
qcom,local-pid = <0>; |
| 860 |
qcom,remote-pid = <1>; |
| 861 |
|
| 862 |
modem_smp2p_out: master-kernel { |
| 863 |
qcom,entry-name = "master-kernel"; |
| 864 |
#qcom,smem-state-cells = <1>; |
| 865 |
}; |
| 866 |
|
| 867 |
modem_smp2p_in: slave-kernel { |
| 868 |
qcom,entry-name = "slave-kernel"; |
| 869 |
|
| 870 |
interrupt-controller; |
| 871 |
#interrupt-cells = <2>; |
| 872 |
}; |
| 873 |
}; |
| 874 |
|
| 875 |
smp2p-slpi { |
| 876 |
compatible = "qcom,smp2p"; |
| 877 |
qcom,smem = <481>, <430>; |
| 878 |
|
| 879 |
interrupts = <GIC_SPI 172 IRQ_TYPE_EDGE_RISING>; |
| 880 |
|
| 881 |
mboxes = <&apss_shared 26>; |
| 882 |
|
| 883 |
qcom,local-pid = <0>; |
| 884 |
qcom,remote-pid = <3>; |
| 885 |
|
| 886 |
slpi_smp2p_out: master-kernel { |
| 887 |
qcom,entry-name = "master-kernel"; |
| 888 |
#qcom,smem-state-cells = <1>; |
| 889 |
}; |
| 890 |
|
| 891 |
slpi_smp2p_in: slave-kernel { |
| 892 |
qcom,entry-name = "slave-kernel"; |
| 893 |
|
| 894 |
interrupt-controller; |
| 895 |
#interrupt-cells = <2>; |
| 896 |
}; |
| 897 |
}; |
| 898 |
|
| 899 |
soc: soc@0 { |
| 900 |
#address-cells = <2>; |
| 901 |
#size-cells = <2>; |
| 902 |
ranges = <0 0 0 0 0x10 0>; |
| 903 |
dma-ranges = <0 0 0 0 0x10 0>; |
| 904 |
compatible = "simple-bus"; |
| 905 |
|
| 906 |
gcc: clock-controller@100000 { |
| 907 |
compatible = "qcom,gcc-sm8150"; |
| 908 |
reg = <0x0 0x00100000 0x0 0x1f0000>; |
| 909 |
#clock-cells = <1>; |
| 910 |
#reset-cells = <1>; |
| 911 |
#power-domain-cells = <1>; |
| 912 |
clock-names = "bi_tcxo", |
| 913 |
"sleep_clk"; |
| 914 |
clocks = <&rpmhcc RPMH_CXO_CLK>, |
| 915 |
<&sleep_clk>; |
| 916 |
}; |
| 917 |
|
| 918 |
gpi_dma0: dma-controller@800000 { |
| 919 |
compatible = "qcom,sm8150-gpi-dma", "qcom,sdm845-gpi-dma"; |
| 920 |
reg = <0 0x00800000 0 0x60000>; |
| 921 |
interrupts = <GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>, |
| 922 |
<GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>, |
| 923 |
<GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>, |
| 924 |
<GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>, |
| 925 |
<GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH>, |
| 926 |
<GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>, |
| 927 |
<GIC_SPI 250 IRQ_TYPE_LEVEL_HIGH>, |
| 928 |
<GIC_SPI 251 IRQ_TYPE_LEVEL_HIGH>, |
| 929 |
<GIC_SPI 252 IRQ_TYPE_LEVEL_HIGH>, |
| 930 |
<GIC_SPI 253 IRQ_TYPE_LEVEL_HIGH>, |
| 931 |
<GIC_SPI 254 IRQ_TYPE_LEVEL_HIGH>, |
| 932 |
<GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>, |
| 933 |
<GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>; |
| 934 |
dma-channels = <13>; |
| 935 |
dma-channel-mask = <0xfa>; |
| 936 |
iommus = <&apps_smmu 0x00d6 0x0>; |
| 937 |
#dma-cells = <3>; |
| 938 |
status = "disabled"; |
| 939 |
}; |
| 940 |
|
| 941 |
ethernet: ethernet@20000 { |
| 942 |
compatible = "qcom,sm8150-ethqos"; |
| 943 |
reg = <0x0 0x00020000 0x0 0x10000>, |
| 944 |
<0x0 0x00036000 0x0 0x100>; |
| 945 |
reg-names = "stmmaceth", "rgmii"; |
| 946 |
clock-names = "stmmaceth", "pclk", "ptp_ref", "rgmii"; |
| 947 |
clocks = <&gcc GCC_EMAC_AXI_CLK>, |
| 948 |
<&gcc GCC_EMAC_SLV_AHB_CLK>, |
| 949 |
<&gcc GCC_EMAC_PTP_CLK>, |
| 950 |
<&gcc GCC_EMAC_RGMII_CLK>; |
| 951 |
interrupts = <GIC_SPI 689 IRQ_TYPE_LEVEL_HIGH>, |
| 952 |
<GIC_SPI 699 IRQ_TYPE_LEVEL_HIGH>; |
| 953 |
interrupt-names = "macirq", "eth_lpi"; |
| 954 |
|
| 955 |
power-domains = <&gcc EMAC_GDSC>; |
| 956 |
resets = <&gcc GCC_EMAC_BCR>; |
| 957 |
|
| 958 |
iommus = <&apps_smmu 0x3c0 0x0>; |
| 959 |
|
| 960 |
snps,tso; |
| 961 |
rx-fifo-depth = <4096>; |
| 962 |
tx-fifo-depth = <4096>; |
| 963 |
|
| 964 |
status = "disabled"; |
| 965 |
}; |
| 966 |
|
| 967 |
qfprom: efuse@784000 { |
| 968 |
compatible = "qcom,sm8150-qfprom", "qcom,qfprom"; |
| 969 |
reg = <0 0x00784000 0 0x8ff>; |
| 970 |
#address-cells = <1>; |
| 971 |
#size-cells = <1>; |
| 972 |
|
| 973 |
gpu_speed_bin: gpu-speed-bin@133 { |
| 974 |
reg = <0x133 0x1>; |
| 975 |
bits = <5 3>; |
| 976 |
}; |
| 977 |
}; |
| 978 |
|
| 979 |
qupv3_id_0: geniqup@8c0000 { |
| 980 |
compatible = "qcom,geni-se-qup"; |
| 981 |
reg = <0x0 0x008c0000 0x0 0x6000>; |
| 982 |
clock-names = "m-ahb", "s-ahb"; |
| 983 |
clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>, |
| 984 |
<&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>; |
| 985 |
iommus = <&apps_smmu 0xc3 0x0>; |
| 986 |
#address-cells = <2>; |
| 987 |
#size-cells = <2>; |
| 988 |
ranges; |
| 989 |
status = "disabled"; |
| 990 |
|
| 991 |
i2c0: i2c@880000 { |
| 992 |
compatible = "qcom,geni-i2c"; |
| 993 |
reg = <0 0x00880000 0 0x4000>; |
| 994 |
clock-names = "se"; |
| 995 |
clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>; |
| 996 |
dmas = <&gpi_dma0 0 0 QCOM_GPI_I2C>, |
| 997 |
<&gpi_dma0 1 0 QCOM_GPI_I2C>; |
| 998 |
dma-names = "tx", "rx"; |
| 999 |
pinctrl-names = "default"; |
| 1000 |
pinctrl-0 = <&qup_i2c0_default>; |
| 1001 |
interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>; |
| 1002 |
#address-cells = <1>; |
| 1003 |
#size-cells = <0>; |
| 1004 |
status = "disabled"; |
| 1005 |
}; |
| 1006 |
|
| 1007 |
spi0: spi@880000 { |
| 1008 |
compatible = "qcom,geni-spi"; |
| 1009 |
reg = <0 0x00880000 0 0x4000>; |
| 1010 |
reg-names = "se"; |
| 1011 |
clock-names = "se"; |
| 1012 |
clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>; |
| 1013 |
dmas = <&gpi_dma0 0 0 QCOM_GPI_SPI>, |
| 1014 |
<&gpi_dma0 1 0 QCOM_GPI_SPI>; |
| 1015 |
dma-names = "tx", "rx"; |
| 1016 |
pinctrl-names = "default"; |
| 1017 |
pinctrl-0 = <&qup_spi0_default>; |
| 1018 |
interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>; |
| 1019 |
spi-max-frequency = <50000000>; |
| 1020 |
#address-cells = <1>; |
| 1021 |
#size-cells = <0>; |
| 1022 |
status = "disabled"; |
| 1023 |
}; |
| 1024 |
|
| 1025 |
i2c1: i2c@884000 { |
| 1026 |
compatible = "qcom,geni-i2c"; |
| 1027 |
reg = <0 0x00884000 0 0x4000>; |
| 1028 |
clock-names = "se"; |
| 1029 |
clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>; |
| 1030 |
dmas = <&gpi_dma0 0 1 QCOM_GPI_I2C>, |
| 1031 |
<&gpi_dma0 1 1 QCOM_GPI_I2C>; |
| 1032 |
dma-names = "tx", "rx"; |
| 1033 |
pinctrl-names = "default"; |
| 1034 |
pinctrl-0 = <&qup_i2c1_default>; |
| 1035 |
interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>; |
| 1036 |
#address-cells = <1>; |
| 1037 |
#size-cells = <0>; |
| 1038 |
status = "disabled"; |
| 1039 |
}; |
| 1040 |
|
| 1041 |
spi1: spi@884000 { |
| 1042 |
compatible = "qcom,geni-spi"; |
| 1043 |
reg = <0 0x00884000 0 0x4000>; |
| 1044 |
reg-names = "se"; |
| 1045 |
clock-names = "se"; |
| 1046 |
clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>; |
| 1047 |
dmas = <&gpi_dma0 0 1 QCOM_GPI_SPI>, |
| 1048 |
<&gpi_dma0 1 1 QCOM_GPI_SPI>; |
| 1049 |
dma-names = "tx", "rx"; |
| 1050 |
pinctrl-names = "default"; |
| 1051 |
pinctrl-0 = <&qup_spi1_default>; |
| 1052 |
interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>; |
| 1053 |
spi-max-frequency = <50000000>; |
| 1054 |
#address-cells = <1>; |
| 1055 |
#size-cells = <0>; |
| 1056 |
status = "disabled"; |
| 1057 |
}; |
| 1058 |
|
| 1059 |
i2c2: i2c@888000 { |
| 1060 |
compatible = "qcom,geni-i2c"; |
| 1061 |
reg = <0 0x00888000 0 0x4000>; |
| 1062 |
clock-names = "se"; |
| 1063 |
clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>; |
| 1064 |
dmas = <&gpi_dma0 0 2 QCOM_GPI_I2C>, |
| 1065 |
<&gpi_dma0 1 2 QCOM_GPI_I2C>; |
| 1066 |
dma-names = "tx", "rx"; |
| 1067 |
pinctrl-names = "default"; |
| 1068 |
pinctrl-0 = <&qup_i2c2_default>; |
| 1069 |
interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>; |
| 1070 |
#address-cells = <1>; |
| 1071 |
#size-cells = <0>; |
| 1072 |
status = "disabled"; |
| 1073 |
}; |
| 1074 |
|
| 1075 |
spi2: spi@888000 { |
| 1076 |
compatible = "qcom,geni-spi"; |
| 1077 |
reg = <0 0x00888000 0 0x4000>; |
| 1078 |
reg-names = "se"; |
| 1079 |
clock-names = "se"; |
| 1080 |
clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>; |
| 1081 |
dmas = <&gpi_dma0 0 2 QCOM_GPI_SPI>, |
| 1082 |
<&gpi_dma0 1 2 QCOM_GPI_SPI>; |
| 1083 |
dma-names = "tx", "rx"; |
| 1084 |
pinctrl-names = "default"; |
| 1085 |
pinctrl-0 = <&qup_spi2_default>; |
| 1086 |
interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>; |
| 1087 |
spi-max-frequency = <50000000>; |
| 1088 |
#address-cells = <1>; |
| 1089 |
#size-cells = <0>; |
| 1090 |
status = "disabled"; |
| 1091 |
}; |
| 1092 |
|
| 1093 |
i2c3: i2c@88c000 { |
| 1094 |
compatible = "qcom,geni-i2c"; |
| 1095 |
reg = <0 0x0088c000 0 0x4000>; |
| 1096 |
clock-names = "se"; |
| 1097 |
clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>; |
| 1098 |
dmas = <&gpi_dma0 0 3 QCOM_GPI_I2C>, |
| 1099 |
<&gpi_dma0 1 3 QCOM_GPI_I2C>; |
| 1100 |
dma-names = "tx", "rx"; |
| 1101 |
pinctrl-names = "default"; |
| 1102 |
pinctrl-0 = <&qup_i2c3_default>; |
| 1103 |
interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>; |
| 1104 |
#address-cells = <1>; |
| 1105 |
#size-cells = <0>; |
| 1106 |
status = "disabled"; |
| 1107 |
}; |
| 1108 |
|
| 1109 |
spi3: spi@88c000 { |
| 1110 |
compatible = "qcom,geni-spi"; |
| 1111 |
reg = <0 0x0088c000 0 0x4000>; |
| 1112 |
reg-names = "se"; |
| 1113 |
clock-names = "se"; |
| 1114 |
clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>; |
| 1115 |
dmas = <&gpi_dma0 0 3 QCOM_GPI_SPI>, |
| 1116 |
<&gpi_dma0 1 3 QCOM_GPI_SPI>; |
| 1117 |
dma-names = "tx", "rx"; |
| 1118 |
pinctrl-names = "default"; |
| 1119 |
pinctrl-0 = <&qup_spi3_default>; |
| 1120 |
interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>; |
| 1121 |
spi-max-frequency = <50000000>; |
| 1122 |
#address-cells = <1>; |
| 1123 |
#size-cells = <0>; |
| 1124 |
status = "disabled"; |
| 1125 |
}; |
| 1126 |
|
| 1127 |
i2c4: i2c@890000 { |
| 1128 |
compatible = "qcom,geni-i2c"; |
| 1129 |
reg = <0 0x00890000 0 0x4000>; |
| 1130 |
clock-names = "se"; |
| 1131 |
clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>; |
| 1132 |
dmas = <&gpi_dma0 0 4 QCOM_GPI_I2C>, |
| 1133 |
<&gpi_dma0 1 4 QCOM_GPI_I2C>; |
| 1134 |
dma-names = "tx", "rx"; |
| 1135 |
pinctrl-names = "default"; |
| 1136 |
pinctrl-0 = <&qup_i2c4_default>; |
| 1137 |
interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>; |
| 1138 |
#address-cells = <1>; |
| 1139 |
#size-cells = <0>; |
| 1140 |
status = "disabled"; |
| 1141 |
}; |
| 1142 |
|
| 1143 |
spi4: spi@890000 { |
| 1144 |
compatible = "qcom,geni-spi"; |
| 1145 |
reg = <0 0x00890000 0 0x4000>; |
| 1146 |
reg-names = "se"; |
| 1147 |
clock-names = "se"; |
| 1148 |
clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>; |
| 1149 |
dmas = <&gpi_dma0 0 4 QCOM_GPI_SPI>, |
| 1150 |
<&gpi_dma0 1 4 QCOM_GPI_SPI>; |
| 1151 |
dma-names = "tx", "rx"; |
| 1152 |
pinctrl-names = "default"; |
| 1153 |
pinctrl-0 = <&qup_spi4_default>; |
| 1154 |
interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>; |
| 1155 |
spi-max-frequency = <50000000>; |
| 1156 |
#address-cells = <1>; |
| 1157 |
#size-cells = <0>; |
| 1158 |
status = "disabled"; |
| 1159 |
}; |
| 1160 |
|
| 1161 |
i2c5: i2c@894000 { |
| 1162 |
compatible = "qcom,geni-i2c"; |
| 1163 |
reg = <0 0x00894000 0 0x4000>; |
| 1164 |
clock-names = "se"; |
| 1165 |
clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>; |
| 1166 |
dmas = <&gpi_dma0 0 5 QCOM_GPI_I2C>, |
| 1167 |
<&gpi_dma0 1 5 QCOM_GPI_I2C>; |
| 1168 |
dma-names = "tx", "rx"; |
| 1169 |
pinctrl-names = "default"; |
| 1170 |
pinctrl-0 = <&qup_i2c5_default>; |
| 1171 |
interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>; |
| 1172 |
#address-cells = <1>; |
| 1173 |
#size-cells = <0>; |
| 1174 |
status = "disabled"; |
| 1175 |
}; |
| 1176 |
|
| 1177 |
spi5: spi@894000 { |
| 1178 |
compatible = "qcom,geni-spi"; |
| 1179 |
reg = <0 0x00894000 0 0x4000>; |
| 1180 |
reg-names = "se"; |
| 1181 |
clock-names = "se"; |
| 1182 |
clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>; |
| 1183 |
dmas = <&gpi_dma0 0 5 QCOM_GPI_SPI>, |
| 1184 |
<&gpi_dma0 1 5 QCOM_GPI_SPI>; |
| 1185 |
dma-names = "tx", "rx"; |
| 1186 |
pinctrl-names = "default"; |
| 1187 |
pinctrl-0 = <&qup_spi5_default>; |
| 1188 |
interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>; |
| 1189 |
spi-max-frequency = <50000000>; |
| 1190 |
#address-cells = <1>; |
| 1191 |
#size-cells = <0>; |
| 1192 |
status = "disabled"; |
| 1193 |
}; |
| 1194 |
|
| 1195 |
i2c6: i2c@898000 { |
| 1196 |
compatible = "qcom,geni-i2c"; |
| 1197 |
reg = <0 0x00898000 0 0x4000>; |
| 1198 |
clock-names = "se"; |
| 1199 |
clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>; |
| 1200 |
dmas = <&gpi_dma0 0 6 QCOM_GPI_I2C>, |
| 1201 |
<&gpi_dma0 1 6 QCOM_GPI_I2C>; |
| 1202 |
dma-names = "tx", "rx"; |
| 1203 |
pinctrl-names = "default"; |
| 1204 |
pinctrl-0 = <&qup_i2c6_default>; |
| 1205 |
interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>; |
| 1206 |
#address-cells = <1>; |
| 1207 |
#size-cells = <0>; |
| 1208 |
status = "disabled"; |
| 1209 |
}; |
| 1210 |
|
| 1211 |
spi6: spi@898000 { |
| 1212 |
compatible = "qcom,geni-spi"; |
| 1213 |
reg = <0 0x00898000 0 0x4000>; |
| 1214 |
reg-names = "se"; |
| 1215 |
clock-names = "se"; |
| 1216 |
clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>; |
| 1217 |
dmas = <&gpi_dma0 0 6 QCOM_GPI_SPI>, |
| 1218 |
<&gpi_dma0 1 6 QCOM_GPI_SPI>; |
| 1219 |
dma-names = "tx", "rx"; |
| 1220 |
pinctrl-names = "default"; |
| 1221 |
pinctrl-0 = <&qup_spi6_default>; |
| 1222 |
interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>; |
| 1223 |
spi-max-frequency = <50000000>; |
| 1224 |
#address-cells = <1>; |
| 1225 |
#size-cells = <0>; |
| 1226 |
status = "disabled"; |
| 1227 |
}; |
| 1228 |
|
| 1229 |
i2c7: i2c@89c000 { |
| 1230 |
compatible = "qcom,geni-i2c"; |
| 1231 |
reg = <0 0x0089c000 0 0x4000>; |
| 1232 |
clock-names = "se"; |
| 1233 |
clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>; |
| 1234 |
dmas = <&gpi_dma0 0 7 QCOM_GPI_I2C>, |
| 1235 |
<&gpi_dma0 1 7 QCOM_GPI_I2C>; |
| 1236 |
dma-names = "tx", "rx"; |
| 1237 |
pinctrl-names = "default"; |
| 1238 |
pinctrl-0 = <&qup_i2c7_default>; |
| 1239 |
interrupts = <GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>; |
| 1240 |
#address-cells = <1>; |
| 1241 |
#size-cells = <0>; |
| 1242 |
status = "disabled"; |
| 1243 |
}; |
| 1244 |
|
| 1245 |
spi7: spi@89c000 { |
| 1246 |
compatible = "qcom,geni-spi"; |
| 1247 |
reg = <0 0x0089c000 0 0x4000>; |
| 1248 |
reg-names = "se"; |
| 1249 |
clock-names = "se"; |
| 1250 |
clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>; |
| 1251 |
dmas = <&gpi_dma0 0 7 QCOM_GPI_SPI>, |
| 1252 |
<&gpi_dma0 1 7 QCOM_GPI_SPI>; |
| 1253 |
dma-names = "tx", "rx"; |
| 1254 |
pinctrl-names = "default"; |
| 1255 |
pinctrl-0 = <&qup_spi7_default>; |
| 1256 |
interrupts = <GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>; |
| 1257 |
spi-max-frequency = <50000000>; |
| 1258 |
#address-cells = <1>; |
| 1259 |
#size-cells = <0>; |
| 1260 |
status = "disabled"; |
| 1261 |
}; |
| 1262 |
}; |
| 1263 |
|
| 1264 |
gpi_dma1: dma-controller@a00000 { |
| 1265 |
compatible = "qcom,sm8150-gpi-dma", "qcom,sdm845-gpi-dma"; |
| 1266 |
reg = <0 0x00a00000 0 0x60000>; |
| 1267 |
interrupts = <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH>, |
| 1268 |
<GIC_SPI 280 IRQ_TYPE_LEVEL_HIGH>, |
| 1269 |
<GIC_SPI 281 IRQ_TYPE_LEVEL_HIGH>, |
| 1270 |
<GIC_SPI 282 IRQ_TYPE_LEVEL_HIGH>, |
| 1271 |
<GIC_SPI 283 IRQ_TYPE_LEVEL_HIGH>, |
| 1272 |
<GIC_SPI 284 IRQ_TYPE_LEVEL_HIGH>, |
| 1273 |
<GIC_SPI 293 IRQ_TYPE_LEVEL_HIGH>, |
| 1274 |
<GIC_SPI 294 IRQ_TYPE_LEVEL_HIGH>, |
| 1275 |
<GIC_SPI 295 IRQ_TYPE_LEVEL_HIGH>, |
| 1276 |
<GIC_SPI 296 IRQ_TYPE_LEVEL_HIGH>, |
| 1277 |
<GIC_SPI 297 IRQ_TYPE_LEVEL_HIGH>, |
| 1278 |
<GIC_SPI 298 IRQ_TYPE_LEVEL_HIGH>, |
| 1279 |
<GIC_SPI 299 IRQ_TYPE_LEVEL_HIGH>; |
| 1280 |
dma-channels = <13>; |
| 1281 |
dma-channel-mask = <0xfa>; |
| 1282 |
iommus = <&apps_smmu 0x0616 0x0>; |
| 1283 |
#dma-cells = <3>; |
| 1284 |
status = "disabled"; |
| 1285 |
}; |
| 1286 |
|
| 1287 |
qupv3_id_1: geniqup@ac0000 { |
| 1288 |
compatible = "qcom,geni-se-qup"; |
| 1289 |
reg = <0x0 0x00ac0000 0x0 0x6000>; |
| 1290 |
clock-names = "m-ahb", "s-ahb"; |
| 1291 |
clocks = <&gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>, |
| 1292 |
<&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>; |
| 1293 |
iommus = <&apps_smmu 0x603 0x0>; |
| 1294 |
#address-cells = <2>; |
| 1295 |
#size-cells = <2>; |
| 1296 |
ranges; |
| 1297 |
status = "disabled"; |
| 1298 |
|
| 1299 |
i2c8: i2c@a80000 { |
| 1300 |
compatible = "qcom,geni-i2c"; |
| 1301 |
reg = <0 0x00a80000 0 0x4000>; |
| 1302 |
clock-names = "se"; |
| 1303 |
clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>; |
| 1304 |
dmas = <&gpi_dma1 0 0 QCOM_GPI_I2C>, |
| 1305 |
<&gpi_dma1 1 0 QCOM_GPI_I2C>; |
| 1306 |
dma-names = "tx", "rx"; |
| 1307 |
pinctrl-names = "default"; |
| 1308 |
pinctrl-0 = <&qup_i2c8_default>; |
| 1309 |
interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>; |
| 1310 |
#address-cells = <1>; |
| 1311 |
#size-cells = <0>; |
| 1312 |
status = "disabled"; |
| 1313 |
}; |
| 1314 |
|
| 1315 |
spi8: spi@a80000 { |
| 1316 |
compatible = "qcom,geni-spi"; |
| 1317 |
reg = <0 0x00a80000 0 0x4000>; |
| 1318 |
reg-names = "se"; |
| 1319 |
clock-names = "se"; |
| 1320 |
clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>; |
| 1321 |
dmas = <&gpi_dma1 0 0 QCOM_GPI_SPI>, |
| 1322 |
<&gpi_dma1 1 0 QCOM_GPI_SPI>; |
| 1323 |
dma-names = "tx", "rx"; |
| 1324 |
pinctrl-names = "default"; |
| 1325 |
pinctrl-0 = <&qup_spi8_default>; |
| 1326 |
interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>; |
| 1327 |
spi-max-frequency = <50000000>; |
| 1328 |
#address-cells = <1>; |
| 1329 |
#size-cells = <0>; |
| 1330 |
status = "disabled"; |
| 1331 |
}; |
| 1332 |
|
| 1333 |
i2c9: i2c@a84000 { |
| 1334 |
compatible = "qcom,geni-i2c"; |
| 1335 |
reg = <0 0x00a84000 0 0x4000>; |
| 1336 |
clock-names = "se"; |
| 1337 |
clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>; |
| 1338 |
dmas = <&gpi_dma1 0 1 QCOM_GPI_I2C>, |
| 1339 |
<&gpi_dma1 1 1 QCOM_GPI_I2C>; |
| 1340 |
dma-names = "tx", "rx"; |
| 1341 |
pinctrl-names = "default"; |
| 1342 |
pinctrl-0 = <&qup_i2c9_default>; |
| 1343 |
interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>; |
| 1344 |
#address-cells = <1>; |
| 1345 |
#size-cells = <0>; |
| 1346 |
status = "disabled"; |
| 1347 |
}; |
| 1348 |
|
| 1349 |
spi9: spi@a84000 { |
| 1350 |
compatible = "qcom,geni-spi"; |
| 1351 |
reg = <0 0x00a84000 0 0x4000>; |
| 1352 |
reg-names = "se"; |
| 1353 |
clock-names = "se"; |
| 1354 |
clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>; |
| 1355 |
dmas = <&gpi_dma1 0 1 QCOM_GPI_SPI>, |
| 1356 |
<&gpi_dma1 1 1 QCOM_GPI_SPI>; |
| 1357 |
dma-names = "tx", "rx"; |
| 1358 |
pinctrl-names = "default"; |
| 1359 |
pinctrl-0 = <&qup_spi9_default>; |
| 1360 |
interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>; |
| 1361 |
spi-max-frequency = <50000000>; |
| 1362 |
#address-cells = <1>; |
| 1363 |
#size-cells = <0>; |
| 1364 |
status = "disabled"; |
| 1365 |
}; |
| 1366 |
|
| 1367 |
uart9: serial@a84000 { |
| 1368 |
compatible = "qcom,geni-uart"; |
| 1369 |
reg = <0x0 0x00a84000 0x0 0x4000>; |
| 1370 |
clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>; |
| 1371 |
clock-names = "se"; |
| 1372 |
pinctrl-0 = <&qup_uart9_default>; |
| 1373 |
pinctrl-names = "default"; |
| 1374 |
interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>; |
| 1375 |
status = "disabled"; |
| 1376 |
}; |
| 1377 |
|
| 1378 |
i2c10: i2c@a88000 { |
| 1379 |
compatible = "qcom,geni-i2c"; |
| 1380 |
reg = <0 0x00a88000 0 0x4000>; |
| 1381 |
clock-names = "se"; |
| 1382 |
clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>; |
| 1383 |
dmas = <&gpi_dma1 0 2 QCOM_GPI_I2C>, |
| 1384 |
<&gpi_dma1 1 2 QCOM_GPI_I2C>; |
| 1385 |
dma-names = "tx", "rx"; |
| 1386 |
pinctrl-names = "default"; |
| 1387 |
pinctrl-0 = <&qup_i2c10_default>; |
| 1388 |
interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>; |
| 1389 |
#address-cells = <1>; |
| 1390 |
#size-cells = <0>; |
| 1391 |
status = "disabled"; |
| 1392 |
}; |
| 1393 |
|
| 1394 |
spi10: spi@a88000 { |
| 1395 |
compatible = "qcom,geni-spi"; |
| 1396 |
reg = <0 0x00a88000 0 0x4000>; |
| 1397 |
reg-names = "se"; |
| 1398 |
clock-names = "se"; |
| 1399 |
clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>; |
| 1400 |
dmas = <&gpi_dma1 0 2 QCOM_GPI_SPI>, |
| 1401 |
<&gpi_dma1 1 2 QCOM_GPI_SPI>; |
| 1402 |
dma-names = "tx", "rx"; |
| 1403 |
pinctrl-names = "default"; |
| 1404 |
pinctrl-0 = <&qup_spi10_default>; |
| 1405 |
interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>; |
| 1406 |
spi-max-frequency = <50000000>; |
| 1407 |
#address-cells = <1>; |
| 1408 |
#size-cells = <0>; |
| 1409 |
status = "disabled"; |
| 1410 |
}; |
| 1411 |
|
| 1412 |
i2c11: i2c@a8c000 { |
| 1413 |
compatible = "qcom,geni-i2c"; |
| 1414 |
reg = <0 0x00a8c000 0 0x4000>; |
| 1415 |
clock-names = "se"; |
| 1416 |
clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>; |
| 1417 |
dmas = <&gpi_dma1 0 3 QCOM_GPI_I2C>, |
| 1418 |
<&gpi_dma1 1 3 QCOM_GPI_I2C>; |
| 1419 |
dma-names = "tx", "rx"; |
| 1420 |
pinctrl-names = "default"; |
| 1421 |
pinctrl-0 = <&qup_i2c11_default>; |
| 1422 |
interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>; |
| 1423 |
#address-cells = <1>; |
| 1424 |
#size-cells = <0>; |
| 1425 |
status = "disabled"; |
| 1426 |
}; |
| 1427 |
|
| 1428 |
spi11: spi@a8c000 { |
| 1429 |
compatible = "qcom,geni-spi"; |
| 1430 |
reg = <0 0x00a8c000 0 0x4000>; |
| 1431 |
reg-names = "se"; |
| 1432 |
clock-names = "se"; |
| 1433 |
clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>; |
| 1434 |
dmas = <&gpi_dma1 0 3 QCOM_GPI_SPI>, |
| 1435 |
<&gpi_dma1 1 3 QCOM_GPI_SPI>; |
| 1436 |
dma-names = "tx", "rx"; |
| 1437 |
pinctrl-names = "default"; |
| 1438 |
pinctrl-0 = <&qup_spi11_default>; |
| 1439 |
interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>; |
| 1440 |
spi-max-frequency = <50000000>; |
| 1441 |
#address-cells = <1>; |
| 1442 |
#size-cells = <0>; |
| 1443 |
status = "disabled"; |
| 1444 |
}; |
| 1445 |
|
| 1446 |
uart2: serial@a90000 { |
| 1447 |
compatible = "qcom,geni-debug-uart"; |
| 1448 |
reg = <0x0 0x00a90000 0x0 0x4000>; |
| 1449 |
clock-names = "se"; |
| 1450 |
clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>; |
| 1451 |
interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>; |
| 1452 |
status = "disabled"; |
| 1453 |
}; |
| 1454 |
|
| 1455 |
i2c12: i2c@a90000 { |
| 1456 |
compatible = "qcom,geni-i2c"; |
| 1457 |
reg = <0 0x00a90000 0 0x4000>; |
| 1458 |
clock-names = "se"; |
| 1459 |
clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>; |
| 1460 |
dmas = <&gpi_dma1 0 4 QCOM_GPI_I2C>, |
| 1461 |
<&gpi_dma1 1 4 QCOM_GPI_I2C>; |
| 1462 |
dma-names = "tx", "rx"; |
| 1463 |
pinctrl-names = "default"; |
| 1464 |
pinctrl-0 = <&qup_i2c12_default>; |
| 1465 |
interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>; |
| 1466 |
#address-cells = <1>; |
| 1467 |
#size-cells = <0>; |
| 1468 |
status = "disabled"; |
| 1469 |
}; |
| 1470 |
|
| 1471 |
spi12: spi@a90000 { |
| 1472 |
compatible = "qcom,geni-spi"; |
| 1473 |
reg = <0 0x00a90000 0 0x4000>; |
| 1474 |
reg-names = "se"; |
| 1475 |
clock-names = "se"; |
| 1476 |
clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>; |
| 1477 |
dmas = <&gpi_dma1 0 4 QCOM_GPI_SPI>, |
| 1478 |
<&gpi_dma1 1 4 QCOM_GPI_SPI>; |
| 1479 |
dma-names = "tx", "rx"; |
| 1480 |
pinctrl-names = "default"; |
| 1481 |
pinctrl-0 = <&qup_spi12_default>; |
| 1482 |
interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>; |
| 1483 |
spi-max-frequency = <50000000>; |
| 1484 |
#address-cells = <1>; |
| 1485 |
#size-cells = <0>; |
| 1486 |
status = "disabled"; |
| 1487 |
}; |
| 1488 |
|
| 1489 |
i2c16: i2c@94000 { |
| 1490 |
compatible = "qcom,geni-i2c"; |
| 1491 |
reg = <0 0x00094000 0 0x4000>; |
| 1492 |
clock-names = "se"; |
| 1493 |
clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>; |
| 1494 |
dmas = <&gpi_dma2 0 5 QCOM_GPI_I2C>, |
| 1495 |
<&gpi_dma2 1 5 QCOM_GPI_I2C>; |
| 1496 |
dma-names = "tx", "rx"; |
| 1497 |
pinctrl-names = "default"; |
| 1498 |
pinctrl-0 = <&qup_i2c16_default>; |
| 1499 |
interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>; |
| 1500 |
#address-cells = <1>; |
| 1501 |
#size-cells = <0>; |
| 1502 |
status = "disabled"; |
| 1503 |
}; |
| 1504 |
|
| 1505 |
spi16: spi@a94000 { |
| 1506 |
compatible = "qcom,geni-spi"; |
| 1507 |
reg = <0 0x00a94000 0 0x4000>; |
| 1508 |
reg-names = "se"; |
| 1509 |
clock-names = "se"; |
| 1510 |
clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>; |
| 1511 |
dmas = <&gpi_dma2 0 5 QCOM_GPI_SPI>, |
| 1512 |
<&gpi_dma2 1 5 QCOM_GPI_SPI>; |
| 1513 |
dma-names = "tx", "rx"; |
| 1514 |
pinctrl-names = "default"; |
| 1515 |
pinctrl-0 = <&qup_spi16_default>; |
| 1516 |
interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>; |
| 1517 |
spi-max-frequency = <50000000>; |
| 1518 |
#address-cells = <1>; |
| 1519 |
#size-cells = <0>; |
| 1520 |
status = "disabled"; |
| 1521 |
}; |
| 1522 |
}; |
| 1523 |
|
| 1524 |
gpi_dma2: dma-controller@c00000 { |
| 1525 |
compatible = "qcom,sm8150-gpi-dma", "qcom,sdm845-gpi-dma"; |
| 1526 |
reg = <0 0x00c00000 0 0x60000>; |
| 1527 |
interrupts = <GIC_SPI 588 IRQ_TYPE_LEVEL_HIGH>, |
| 1528 |
<GIC_SPI 589 IRQ_TYPE_LEVEL_HIGH>, |
| 1529 |
<GIC_SPI 590 IRQ_TYPE_LEVEL_HIGH>, |
| 1530 |
<GIC_SPI 591 IRQ_TYPE_LEVEL_HIGH>, |
| 1531 |
<GIC_SPI 592 IRQ_TYPE_LEVEL_HIGH>, |
| 1532 |
<GIC_SPI 593 IRQ_TYPE_LEVEL_HIGH>, |
| 1533 |
<GIC_SPI 594 IRQ_TYPE_LEVEL_HIGH>, |
| 1534 |
<GIC_SPI 595 IRQ_TYPE_LEVEL_HIGH>, |
| 1535 |
<GIC_SPI 596 IRQ_TYPE_LEVEL_HIGH>, |
| 1536 |
<GIC_SPI 597 IRQ_TYPE_LEVEL_HIGH>, |
| 1537 |
<GIC_SPI 598 IRQ_TYPE_LEVEL_HIGH>, |
| 1538 |
<GIC_SPI 599 IRQ_TYPE_LEVEL_HIGH>, |
| 1539 |
<GIC_SPI 600 IRQ_TYPE_LEVEL_HIGH>; |
| 1540 |
dma-channels = <13>; |
| 1541 |
dma-channel-mask = <0xfa>; |
| 1542 |
iommus = <&apps_smmu 0x07b6 0x0>; |
| 1543 |
#dma-cells = <3>; |
| 1544 |
status = "disabled"; |
| 1545 |
}; |
| 1546 |
|
| 1547 |
qupv3_id_2: geniqup@cc0000 { |
| 1548 |
compatible = "qcom,geni-se-qup"; |
| 1549 |
reg = <0x0 0x00cc0000 0x0 0x6000>; |
| 1550 |
|
| 1551 |
clock-names = "m-ahb", "s-ahb"; |
| 1552 |
clocks = <&gcc GCC_QUPV3_WRAP_2_M_AHB_CLK>, |
| 1553 |
<&gcc GCC_QUPV3_WRAP_2_S_AHB_CLK>; |
| 1554 |
iommus = <&apps_smmu 0x7a3 0x0>; |
| 1555 |
#address-cells = <2>; |
| 1556 |
#size-cells = <2>; |
| 1557 |
ranges; |
| 1558 |
status = "disabled"; |
| 1559 |
|
| 1560 |
i2c17: i2c@c80000 { |
| 1561 |
compatible = "qcom,geni-i2c"; |
| 1562 |
reg = <0 0x00c80000 0 0x4000>; |
| 1563 |
clock-names = "se"; |
| 1564 |
clocks = <&gcc GCC_QUPV3_WRAP2_S0_CLK>; |
| 1565 |
dmas = <&gpi_dma2 0 0 QCOM_GPI_I2C>, |
| 1566 |
<&gpi_dma2 1 0 QCOM_GPI_I2C>; |
| 1567 |
dma-names = "tx", "rx"; |
| 1568 |
pinctrl-names = "default"; |
| 1569 |
pinctrl-0 = <&qup_i2c17_default>; |
| 1570 |
interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>; |
| 1571 |
#address-cells = <1>; |
| 1572 |
#size-cells = <0>; |
| 1573 |
status = "disabled"; |
| 1574 |
}; |
| 1575 |
|
| 1576 |
spi17: spi@c80000 { |
| 1577 |
compatible = "qcom,geni-spi"; |
| 1578 |
reg = <0 0x00c80000 0 0x4000>; |
| 1579 |
reg-names = "se"; |
| 1580 |
clock-names = "se"; |
| 1581 |
clocks = <&gcc GCC_QUPV3_WRAP2_S0_CLK>; |
| 1582 |
dmas = <&gpi_dma2 0 0 QCOM_GPI_SPI>, |
| 1583 |
<&gpi_dma2 1 0 QCOM_GPI_SPI>; |
| 1584 |
dma-names = "tx", "rx"; |
| 1585 |
pinctrl-names = "default"; |
| 1586 |
pinctrl-0 = <&qup_spi17_default>; |
| 1587 |
interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>; |
| 1588 |
spi-max-frequency = <50000000>; |
| 1589 |
#address-cells = <1>; |
| 1590 |
#size-cells = <0>; |
| 1591 |
status = "disabled"; |
| 1592 |
}; |
| 1593 |
|
| 1594 |
i2c18: i2c@c84000 { |
| 1595 |
compatible = "qcom,geni-i2c"; |
| 1596 |
reg = <0 0x00c84000 0 0x4000>; |
| 1597 |
clock-names = "se"; |
| 1598 |
clocks = <&gcc GCC_QUPV3_WRAP2_S1_CLK>; |
| 1599 |
dmas = <&gpi_dma2 0 1 QCOM_GPI_I2C>, |
| 1600 |
<&gpi_dma2 1 1 QCOM_GPI_I2C>; |
| 1601 |
dma-names = "tx", "rx"; |
| 1602 |
pinctrl-names = "default"; |
| 1603 |
pinctrl-0 = <&qup_i2c18_default>; |
| 1604 |
interrupts = <GIC_SPI 583 IRQ_TYPE_LEVEL_HIGH>; |
| 1605 |
#address-cells = <1>; |
| 1606 |
#size-cells = <0>; |
| 1607 |
status = "disabled"; |
| 1608 |
}; |
| 1609 |
|
| 1610 |
spi18: spi@c84000 { |
| 1611 |
compatible = "qcom,geni-spi"; |
| 1612 |
reg = <0 0x00c84000 0 0x4000>; |
| 1613 |
reg-names = "se"; |
| 1614 |
clock-names = "se"; |
| 1615 |
clocks = <&gcc GCC_QUPV3_WRAP2_S1_CLK>; |
| 1616 |
dmas = <&gpi_dma2 0 1 QCOM_GPI_SPI>, |
| 1617 |
<&gpi_dma2 1 1 QCOM_GPI_SPI>; |
| 1618 |
dma-names = "tx", "rx"; |
| 1619 |
pinctrl-names = "default"; |
| 1620 |
pinctrl-0 = <&qup_spi18_default>; |
| 1621 |
interrupts = <GIC_SPI 583 IRQ_TYPE_LEVEL_HIGH>; |
| 1622 |
spi-max-frequency = <50000000>; |
| 1623 |
#address-cells = <1>; |
| 1624 |
#size-cells = <0>; |
| 1625 |
status = "disabled"; |
| 1626 |
}; |
| 1627 |
|
| 1628 |
i2c19: i2c@c88000 { |
| 1629 |
compatible = "qcom,geni-i2c"; |
| 1630 |
reg = <0 0x00c88000 0 0x4000>; |
| 1631 |
clock-names = "se"; |
| 1632 |
clocks = <&gcc GCC_QUPV3_WRAP2_S2_CLK>; |
| 1633 |
dmas = <&gpi_dma2 0 2 QCOM_GPI_I2C>, |
| 1634 |
<&gpi_dma2 1 2 QCOM_GPI_I2C>; |
| 1635 |
dma-names = "tx", "rx"; |
| 1636 |
pinctrl-names = "default"; |
| 1637 |
pinctrl-0 = <&qup_i2c19_default>; |
| 1638 |
interrupts = <GIC_SPI 584 IRQ_TYPE_LEVEL_HIGH>; |
| 1639 |
#address-cells = <1>; |
| 1640 |
#size-cells = <0>; |
| 1641 |
status = "disabled"; |
| 1642 |
}; |
| 1643 |
|
| 1644 |
spi19: spi@c88000 { |
| 1645 |
compatible = "qcom,geni-spi"; |
| 1646 |
reg = <0 0x00c88000 0 0x4000>; |
| 1647 |
reg-names = "se"; |
| 1648 |
clock-names = "se"; |
| 1649 |
clocks = <&gcc GCC_QUPV3_WRAP2_S2_CLK>; |
| 1650 |
dmas = <&gpi_dma2 0 2 QCOM_GPI_SPI>, |
| 1651 |
<&gpi_dma2 1 2 QCOM_GPI_SPI>; |
| 1652 |
dma-names = "tx", "rx"; |
| 1653 |
pinctrl-names = "default"; |
| 1654 |
pinctrl-0 = <&qup_spi19_default>; |
| 1655 |
interrupts = <GIC_SPI 584 IRQ_TYPE_LEVEL_HIGH>; |
| 1656 |
spi-max-frequency = <50000000>; |
| 1657 |
#address-cells = <1>; |
| 1658 |
#size-cells = <0>; |
| 1659 |
status = "disabled"; |
| 1660 |
}; |
| 1661 |
|
| 1662 |
i2c13: i2c@c8c000 { |
| 1663 |
compatible = "qcom,geni-i2c"; |
| 1664 |
reg = <0 0x00c8c000 0 0x4000>; |
| 1665 |
clock-names = "se"; |
| 1666 |
clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>; |
| 1667 |
dmas = <&gpi_dma2 0 3 QCOM_GPI_I2C>, |
| 1668 |
<&gpi_dma2 1 3 QCOM_GPI_I2C>; |
| 1669 |
dma-names = "tx", "rx"; |
| 1670 |
pinctrl-names = "default"; |
| 1671 |
pinctrl-0 = <&qup_i2c13_default>; |
| 1672 |
interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>; |
| 1673 |
#address-cells = <1>; |
| 1674 |
#size-cells = <0>; |
| 1675 |
status = "disabled"; |
| 1676 |
}; |
| 1677 |
|
| 1678 |
spi13: spi@c8c000 { |
| 1679 |
compatible = "qcom,geni-spi"; |
| 1680 |
reg = <0 0x00c8c000 0 0x4000>; |
| 1681 |
reg-names = "se"; |
| 1682 |
clock-names = "se"; |
| 1683 |
clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>; |
| 1684 |
dmas = <&gpi_dma2 0 3 QCOM_GPI_SPI>, |
| 1685 |
<&gpi_dma2 1 3 QCOM_GPI_SPI>; |
| 1686 |
dma-names = "tx", "rx"; |
| 1687 |
pinctrl-names = "default"; |
| 1688 |
pinctrl-0 = <&qup_spi13_default>; |
| 1689 |
interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>; |
| 1690 |
spi-max-frequency = <50000000>; |
| 1691 |
#address-cells = <1>; |
| 1692 |
#size-cells = <0>; |
| 1693 |
status = "disabled"; |
| 1694 |
}; |
| 1695 |
|
| 1696 |
uart13: serial@c8c000 { |
| 1697 |
compatible = "qcom,geni-uart"; |
| 1698 |
reg = <0 0x00c8c000 0 0x4000>; |
| 1699 |
clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>; |
| 1700 |
clock-names = "se"; |
| 1701 |
interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>; |
| 1702 |
status = "disabled"; |
| 1703 |
}; |
| 1704 |
|
| 1705 |
i2c14: i2c@c90000 { |
| 1706 |
compatible = "qcom,geni-i2c"; |
| 1707 |
reg = <0 0x00c90000 0 0x4000>; |
| 1708 |
clock-names = "se"; |
| 1709 |
clocks = <&gcc GCC_QUPV3_WRAP2_S4_CLK>; |
| 1710 |
dmas = <&gpi_dma2 0 4 QCOM_GPI_I2C>, |
| 1711 |
<&gpi_dma2 1 4 QCOM_GPI_I2C>; |
| 1712 |
dma-names = "tx", "rx"; |
| 1713 |
pinctrl-names = "default"; |
| 1714 |
pinctrl-0 = <&qup_i2c14_default>; |
| 1715 |
interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>; |
| 1716 |
#address-cells = <1>; |
| 1717 |
#size-cells = <0>; |
| 1718 |
status = "disabled"; |
| 1719 |
}; |
| 1720 |
|
| 1721 |
spi14: spi@c90000 { |
| 1722 |
compatible = "qcom,geni-spi"; |
| 1723 |
reg = <0 0x00c90000 0 0x4000>; |
| 1724 |
reg-names = "se"; |
| 1725 |
clock-names = "se"; |
| 1726 |
clocks = <&gcc GCC_QUPV3_WRAP2_S4_CLK>; |
| 1727 |
dmas = <&gpi_dma2 0 4 QCOM_GPI_SPI>, |
| 1728 |
<&gpi_dma2 1 4 QCOM_GPI_SPI>; |
| 1729 |
dma-names = "tx", "rx"; |
| 1730 |
pinctrl-names = "default"; |
| 1731 |
pinctrl-0 = <&qup_spi14_default>; |
| 1732 |
interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>; |
| 1733 |
spi-max-frequency = <50000000>; |
| 1734 |
#address-cells = <1>; |
| 1735 |
#size-cells = <0>; |
| 1736 |
status = "disabled"; |
| 1737 |
}; |
| 1738 |
|
| 1739 |
i2c15: i2c@c94000 { |
| 1740 |
compatible = "qcom,geni-i2c"; |
| 1741 |
reg = <0 0x00c94000 0 0x4000>; |
| 1742 |
clock-names = "se"; |
| 1743 |
clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>; |
| 1744 |
dmas = <&gpi_dma2 0 5 QCOM_GPI_I2C>, |
| 1745 |
<&gpi_dma2 1 5 QCOM_GPI_I2C>; |
| 1746 |
dma-names = "tx", "rx"; |
| 1747 |
pinctrl-names = "default"; |
| 1748 |
pinctrl-0 = <&qup_i2c15_default>; |
| 1749 |
interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>; |
| 1750 |
#address-cells = <1>; |
| 1751 |
#size-cells = <0>; |
| 1752 |
status = "disabled"; |
| 1753 |
}; |
| 1754 |
|
| 1755 |
spi15: spi@c94000 { |
| 1756 |
compatible = "qcom,geni-spi"; |
| 1757 |
reg = <0 0x00c94000 0 0x4000>; |
| 1758 |
reg-names = "se"; |
| 1759 |
clock-names = "se"; |
| 1760 |
clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>; |
| 1761 |
dmas = <&gpi_dma2 0 5 QCOM_GPI_SPI>, |
| 1762 |
<&gpi_dma2 1 5 QCOM_GPI_SPI>; |
| 1763 |
dma-names = "tx", "rx"; |
| 1764 |
pinctrl-names = "default"; |
| 1765 |
pinctrl-0 = <&qup_spi15_default>; |
| 1766 |
interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>; |
| 1767 |
spi-max-frequency = <50000000>; |
| 1768 |
#address-cells = <1>; |
| 1769 |
#size-cells = <0>; |
| 1770 |
status = "disabled"; |
| 1771 |
}; |
| 1772 |
}; |
| 1773 |
|
| 1774 |
config_noc: interconnect@1500000 { |
| 1775 |
compatible = "qcom,sm8150-config-noc"; |
| 1776 |
reg = <0 0x01500000 0 0x7400>; |
| 1777 |
#interconnect-cells = <2>; |
| 1778 |
qcom,bcm-voters = <&apps_bcm_voter>; |
| 1779 |
}; |
| 1780 |
|
| 1781 |
system_noc: interconnect@1620000 { |
| 1782 |
compatible = "qcom,sm8150-system-noc"; |
| 1783 |
reg = <0 0x01620000 0 0x19400>; |
| 1784 |
#interconnect-cells = <2>; |
| 1785 |
qcom,bcm-voters = <&apps_bcm_voter>; |
| 1786 |
}; |
| 1787 |
|
| 1788 |
mc_virt: interconnect@163a000 { |
| 1789 |
compatible = "qcom,sm8150-mc-virt"; |
| 1790 |
reg = <0 0x0163a000 0 0x1000>; |
| 1791 |
#interconnect-cells = <2>; |
| 1792 |
qcom,bcm-voters = <&apps_bcm_voter>; |
| 1793 |
}; |
| 1794 |
|
| 1795 |
aggre1_noc: interconnect@16e0000 { |
| 1796 |
compatible = "qcom,sm8150-aggre1-noc"; |
| 1797 |
reg = <0 0x016e0000 0 0xd080>; |
| 1798 |
#interconnect-cells = <2>; |
| 1799 |
qcom,bcm-voters = <&apps_bcm_voter>; |
| 1800 |
}; |
| 1801 |
|
| 1802 |
aggre2_noc: interconnect@1700000 { |
| 1803 |
compatible = "qcom,sm8150-aggre2-noc"; |
| 1804 |
reg = <0 0x01700000 0 0x20000>; |
| 1805 |
#interconnect-cells = <2>; |
| 1806 |
qcom,bcm-voters = <&apps_bcm_voter>; |
| 1807 |
}; |
| 1808 |
|
| 1809 |
compute_noc: interconnect@1720000 { |
| 1810 |
compatible = "qcom,sm8150-compute-noc"; |
| 1811 |
reg = <0 0x01720000 0 0x7000>; |
| 1812 |
#interconnect-cells = <2>; |
| 1813 |
qcom,bcm-voters = <&apps_bcm_voter>; |
| 1814 |
}; |
| 1815 |
|
| 1816 |
mmss_noc: interconnect@1740000 { |
| 1817 |
compatible = "qcom,sm8150-mmss-noc"; |
| 1818 |
reg = <0 0x01740000 0 0x1c100>; |
| 1819 |
#interconnect-cells = <2>; |
| 1820 |
qcom,bcm-voters = <&apps_bcm_voter>; |
| 1821 |
}; |
| 1822 |
|
| 1823 |
system-cache-controller@9200000 { |
| 1824 |
compatible = "qcom,sm8150-llcc"; |
| 1825 |
reg = <0 0x09200000 0 0x50000>, <0 0x09280000 0 0x50000>, |
| 1826 |
<0 0x09300000 0 0x50000>, <0 0x09380000 0 0x50000>, |
| 1827 |
<0 0x09600000 0 0x50000>; |
| 1828 |
reg-names = "llcc0_base", "llcc1_base", "llcc2_base", |
| 1829 |
"llcc3_base", "llcc_broadcast_base"; |
| 1830 |
interrupts = <GIC_SPI 582 IRQ_TYPE_LEVEL_HIGH>; |
| 1831 |
}; |
| 1832 |
|
| 1833 |
dma@10a2000 { |
| 1834 |
compatible = "qcom,sm8150-dcc", "qcom,dcc"; |
| 1835 |
reg = <0x0 0x010a2000 0x0 0x1000>, |
| 1836 |
<0x0 0x010ad000 0x0 0x3000>; |
| 1837 |
}; |
| 1838 |
|
| 1839 |
pcie0: pcie@1c00000 { |
| 1840 |
compatible = "qcom,pcie-sm8150"; |
| 1841 |
reg = <0 0x01c00000 0 0x3000>, |
| 1842 |
<0 0x60000000 0 0xf1d>, |
| 1843 |
<0 0x60000f20 0 0xa8>, |
| 1844 |
<0 0x60001000 0 0x1000>, |
| 1845 |
<0 0x60100000 0 0x100000>; |
| 1846 |
reg-names = "parf", "dbi", "elbi", "atu", "config"; |
| 1847 |
device_type = "pci"; |
| 1848 |
linux,pci-domain = <0>; |
| 1849 |
bus-range = <0x00 0xff>; |
| 1850 |
num-lanes = <1>; |
| 1851 |
|
| 1852 |
#address-cells = <3>; |
| 1853 |
#size-cells = <2>; |
| 1854 |
|
| 1855 |
ranges = <0x01000000 0x0 0x00000000 0x0 0x60200000 0x0 0x100000>, |
| 1856 |
<0x02000000 0x0 0x60300000 0x0 0x60300000 0x0 0x3d00000>; |
| 1857 |
|
| 1858 |
interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>, |
| 1859 |
<GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>, |
| 1860 |
<GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>, |
| 1861 |
<GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>, |
| 1862 |
<GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>, |
| 1863 |
<GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>, |
| 1864 |
<GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>, |
| 1865 |
<GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>, |
| 1866 |
<GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>; |
| 1867 |
interrupt-names = "msi0", |
| 1868 |
"msi1", |
| 1869 |
"msi2", |
| 1870 |
"msi3", |
| 1871 |
"msi4", |
| 1872 |
"msi5", |
| 1873 |
"msi6", |
| 1874 |
"msi7", |
| 1875 |
"global"; |
| 1876 |
#interrupt-cells = <1>; |
| 1877 |
interrupt-map-mask = <0 0 0 0x7>; |
| 1878 |
interrupt-map = <0 0 0 1 &intc GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ |
| 1879 |
<0 0 0 2 &intc GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>, /* int_b */ |
| 1880 |
<0 0 0 3 &intc GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>, /* int_c */ |
| 1881 |
<0 0 0 4 &intc GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>; /* int_d */ |
| 1882 |
|
| 1883 |
clocks = <&gcc GCC_PCIE_0_PIPE_CLK>, |
| 1884 |
<&gcc GCC_PCIE_0_AUX_CLK>, |
| 1885 |
<&gcc GCC_PCIE_0_CFG_AHB_CLK>, |
| 1886 |
<&gcc GCC_PCIE_0_MSTR_AXI_CLK>, |
| 1887 |
<&gcc GCC_PCIE_0_SLV_AXI_CLK>, |
| 1888 |
<&gcc GCC_PCIE_0_SLV_Q2A_AXI_CLK>; |
| 1889 |
clock-names = "pipe", |
| 1890 |
"aux", |
| 1891 |
"cfg", |
| 1892 |
"bus_master", |
| 1893 |
"bus_slave", |
| 1894 |
"slave_q2a"; |
| 1895 |
|
| 1896 |
iommu-map = <0x0 &apps_smmu 0x1d80 0x1>, |
| 1897 |
<0x100 &apps_smmu 0x1d81 0x1>; |
| 1898 |
|
| 1899 |
resets = <&gcc GCC_PCIE_0_BCR>; |
| 1900 |
reset-names = "pci"; |
| 1901 |
|
| 1902 |
power-domains = <&gcc PCIE_0_GDSC>; |
| 1903 |
|
| 1904 |
phys = <&pcie0_phy>; |
| 1905 |
phy-names = "pciephy"; |
| 1906 |
|
| 1907 |
perst-gpios = <&tlmm 35 GPIO_ACTIVE_HIGH>; |
| 1908 |
wake-gpios = <&tlmm 37 GPIO_ACTIVE_HIGH>; |
| 1909 |
|
| 1910 |
pinctrl-names = "default"; |
| 1911 |
pinctrl-0 = <&pcie0_default_state>; |
| 1912 |
|
| 1913 |
status = "disabled"; |
| 1914 |
|
| 1915 |
pcie@0 { |
| 1916 |
device_type = "pci"; |
| 1917 |
reg = <0x0 0x0 0x0 0x0 0x0>; |
| 1918 |
bus-range = <0x01 0xff>; |
| 1919 |
|
| 1920 |
#address-cells = <3>; |
| 1921 |
#size-cells = <2>; |
| 1922 |
ranges; |
| 1923 |
}; |
| 1924 |
}; |
| 1925 |
|
| 1926 |
pcie0_phy: phy@1c06000 { |
| 1927 |
compatible = "qcom,sm8150-qmp-gen3x1-pcie-phy"; |
| 1928 |
reg = <0 0x01c06000 0 0x1000>; |
| 1929 |
clocks = <&gcc GCC_PCIE_PHY_AUX_CLK>, |
| 1930 |
<&gcc GCC_PCIE_0_CFG_AHB_CLK>, |
| 1931 |
<&gcc GCC_PCIE_0_CLKREF_CLK>, |
| 1932 |
<&gcc GCC_PCIE0_PHY_REFGEN_CLK>, |
| 1933 |
<&gcc GCC_PCIE_0_PIPE_CLK>; |
| 1934 |
clock-names = "aux", |
| 1935 |
"cfg_ahb", |
| 1936 |
"ref", |
| 1937 |
"refgen", |
| 1938 |
"pipe"; |
| 1939 |
|
| 1940 |
clock-output-names = "pcie_0_pipe_clk"; |
| 1941 |
#clock-cells = <0>; |
| 1942 |
|
| 1943 |
#phy-cells = <0>; |
| 1944 |
|
| 1945 |
resets = <&gcc GCC_PCIE_0_PHY_BCR>; |
| 1946 |
reset-names = "phy"; |
| 1947 |
|
| 1948 |
assigned-clocks = <&gcc GCC_PCIE0_PHY_REFGEN_CLK>; |
| 1949 |
assigned-clock-rates = <100000000>; |
| 1950 |
|
| 1951 |
status = "disabled"; |
| 1952 |
}; |
| 1953 |
|
| 1954 |
pcie1: pcie@1c08000 { |
| 1955 |
compatible = "qcom,pcie-sm8150"; |
| 1956 |
reg = <0 0x01c08000 0 0x3000>, |
| 1957 |
<0 0x40000000 0 0xf1d>, |
| 1958 |
<0 0x40000f20 0 0xa8>, |
| 1959 |
<0 0x40001000 0 0x1000>, |
| 1960 |
<0 0x40100000 0 0x100000>; |
| 1961 |
reg-names = "parf", "dbi", "elbi", "atu", "config"; |
| 1962 |
device_type = "pci"; |
| 1963 |
linux,pci-domain = <1>; |
| 1964 |
bus-range = <0x00 0xff>; |
| 1965 |
num-lanes = <2>; |
| 1966 |
|
| 1967 |
#address-cells = <3>; |
| 1968 |
#size-cells = <2>; |
| 1969 |
|
| 1970 |
ranges = <0x01000000 0x0 0x00000000 0x0 0x40200000 0x0 0x100000>, |
| 1971 |
<0x02000000 0x0 0x40300000 0x0 0x40300000 0x0 0x1fd00000>; |
| 1972 |
|
| 1973 |
interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>, |
| 1974 |
<GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>, |
| 1975 |
<GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>, |
| 1976 |
<GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>, |
| 1977 |
<GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>, |
| 1978 |
<GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>, |
| 1979 |
<GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>, |
| 1980 |
<GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>, |
| 1981 |
<GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>; |
| 1982 |
interrupt-names = "msi0", |
| 1983 |
"msi1", |
| 1984 |
"msi2", |
| 1985 |
"msi3", |
| 1986 |
"msi4", |
| 1987 |
"msi5", |
| 1988 |
"msi6", |
| 1989 |
"msi7", |
| 1990 |
"global"; |
| 1991 |
#interrupt-cells = <1>; |
| 1992 |
interrupt-map-mask = <0 0 0 0x7>; |
| 1993 |
interrupt-map = <0 0 0 1 &intc GIC_SPI 434 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ |
| 1994 |
<0 0 0 2 &intc GIC_SPI 435 IRQ_TYPE_LEVEL_HIGH>, /* int_b */ |
| 1995 |
<0 0 0 3 &intc GIC_SPI 438 IRQ_TYPE_LEVEL_HIGH>, /* int_c */ |
| 1996 |
<0 0 0 4 &intc GIC_SPI 439 IRQ_TYPE_LEVEL_HIGH>; /* int_d */ |
| 1997 |
|
| 1998 |
clocks = <&gcc GCC_PCIE_1_PIPE_CLK>, |
| 1999 |
<&gcc GCC_PCIE_1_AUX_CLK>, |
| 2000 |
<&gcc GCC_PCIE_1_CFG_AHB_CLK>, |
| 2001 |
<&gcc GCC_PCIE_1_MSTR_AXI_CLK>, |
| 2002 |
<&gcc GCC_PCIE_1_SLV_AXI_CLK>, |
| 2003 |
<&gcc GCC_PCIE_1_SLV_Q2A_AXI_CLK>; |
| 2004 |
clock-names = "pipe", |
| 2005 |
"aux", |
| 2006 |
"cfg", |
| 2007 |
"bus_master", |
| 2008 |
"bus_slave", |
| 2009 |
"slave_q2a"; |
| 2010 |
|
| 2011 |
assigned-clocks = <&gcc GCC_PCIE_1_AUX_CLK>; |
| 2012 |
assigned-clock-rates = <19200000>; |
| 2013 |
|
| 2014 |
iommu-map = <0x0 &apps_smmu 0x1e00 0x1>, |
| 2015 |
<0x100 &apps_smmu 0x1e01 0x1>; |
| 2016 |
|
| 2017 |
resets = <&gcc GCC_PCIE_1_BCR>; |
| 2018 |
reset-names = "pci"; |
| 2019 |
|
| 2020 |
power-domains = <&gcc PCIE_1_GDSC>; |
| 2021 |
|
| 2022 |
phys = <&pcie1_phy>; |
| 2023 |
phy-names = "pciephy"; |
| 2024 |
|
| 2025 |
perst-gpios = <&tlmm 102 GPIO_ACTIVE_HIGH>; |
| 2026 |
enable-gpio = <&tlmm 104 GPIO_ACTIVE_HIGH>; |
| 2027 |
|
| 2028 |
pinctrl-names = "default"; |
| 2029 |
pinctrl-0 = <&pcie1_default_state>; |
| 2030 |
|
| 2031 |
status = "disabled"; |
| 2032 |
|
| 2033 |
pcie@0 { |
| 2034 |
device_type = "pci"; |
| 2035 |
reg = <0x0 0x0 0x0 0x0 0x0>; |
| 2036 |
bus-range = <0x01 0xff>; |
| 2037 |
|
| 2038 |
#address-cells = <3>; |
| 2039 |
#size-cells = <2>; |
| 2040 |
ranges; |
| 2041 |
}; |
| 2042 |
}; |
| 2043 |
|
| 2044 |
pcie1_phy: phy@1c0e000 { |
| 2045 |
compatible = "qcom,sm8150-qmp-gen3x2-pcie-phy"; |
| 2046 |
reg = <0 0x01c0e000 0 0x1000>; |
| 2047 |
clocks = <&gcc GCC_PCIE_PHY_AUX_CLK>, |
| 2048 |
<&gcc GCC_PCIE_1_CFG_AHB_CLK>, |
| 2049 |
<&gcc GCC_PCIE_1_CLKREF_CLK>, |
| 2050 |
<&gcc GCC_PCIE1_PHY_REFGEN_CLK>, |
| 2051 |
<&gcc GCC_PCIE_1_PIPE_CLK>; |
| 2052 |
clock-names = "aux", |
| 2053 |
"cfg_ahb", |
| 2054 |
"ref", |
| 2055 |
"refgen", |
| 2056 |
"pipe"; |
| 2057 |
|
| 2058 |
clock-output-names = "pcie_1_pipe_clk"; |
| 2059 |
#clock-cells = <0>; |
| 2060 |
|
| 2061 |
#phy-cells = <0>; |
| 2062 |
|
| 2063 |
resets = <&gcc GCC_PCIE_1_PHY_BCR>; |
| 2064 |
reset-names = "phy"; |
| 2065 |
|
| 2066 |
assigned-clocks = <&gcc GCC_PCIE1_PHY_REFGEN_CLK>; |
| 2067 |
assigned-clock-rates = <100000000>; |
| 2068 |
|
| 2069 |
status = "disabled"; |
| 2070 |
}; |
| 2071 |
|
| 2072 |
ufs_mem_hc: ufshc@1d84000 { |
| 2073 |
compatible = "qcom,sm8150-ufshc", "qcom,ufshc", |
| 2074 |
"jedec,ufs-2.0"; |
| 2075 |
reg = <0 0x01d84000 0 0x2500>, |
| 2076 |
<0 0x01d90000 0 0x8000>; |
| 2077 |
reg-names = "std", "ice"; |
| 2078 |
interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>; |
| 2079 |
phys = <&ufs_mem_phy>; |
| 2080 |
phy-names = "ufsphy"; |
| 2081 |
lanes-per-direction = <2>; |
| 2082 |
#reset-cells = <1>; |
| 2083 |
resets = <&gcc GCC_UFS_PHY_BCR>; |
| 2084 |
reset-names = "rst"; |
| 2085 |
|
| 2086 |
iommus = <&apps_smmu 0x300 0>; |
| 2087 |
|
| 2088 |
clock-names = |
| 2089 |
"core_clk", |
| 2090 |
"bus_aggr_clk", |
| 2091 |
"iface_clk", |
| 2092 |
"core_clk_unipro", |
| 2093 |
"ref_clk", |
| 2094 |
"tx_lane0_sync_clk", |
| 2095 |
"rx_lane0_sync_clk", |
| 2096 |
"rx_lane1_sync_clk", |
| 2097 |
"ice_core_clk"; |
| 2098 |
clocks = |
| 2099 |
<&gcc GCC_UFS_PHY_AXI_CLK>, |
| 2100 |
<&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>, |
| 2101 |
<&gcc GCC_UFS_PHY_AHB_CLK>, |
| 2102 |
<&gcc GCC_UFS_PHY_UNIPRO_CORE_CLK>, |
| 2103 |
<&rpmhcc RPMH_CXO_CLK>, |
| 2104 |
<&gcc GCC_UFS_PHY_TX_SYMBOL_0_CLK>, |
| 2105 |
<&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>, |
| 2106 |
<&gcc GCC_UFS_PHY_RX_SYMBOL_1_CLK>, |
| 2107 |
<&gcc GCC_UFS_PHY_ICE_CORE_CLK>; |
| 2108 |
freq-table-hz = |
| 2109 |
<37500000 300000000>, |
| 2110 |
<0 0>, |
| 2111 |
<0 0>, |
| 2112 |
<37500000 300000000>, |
| 2113 |
<0 0>, |
| 2114 |
<0 0>, |
| 2115 |
<0 0>, |
| 2116 |
<0 0>, |
| 2117 |
<0 300000000>; |
| 2118 |
|
| 2119 |
status = "disabled"; |
| 2120 |
}; |
| 2121 |
|
| 2122 |
ufs_mem_phy: phy@1d87000 { |
| 2123 |
compatible = "qcom,sm8150-qmp-ufs-phy"; |
| 2124 |
reg = <0 0x01d87000 0 0x1000>; |
| 2125 |
|
| 2126 |
clocks = <&rpmhcc RPMH_CXO_CLK>, |
| 2127 |
<&gcc GCC_UFS_PHY_PHY_AUX_CLK>, |
| 2128 |
<&gcc GCC_UFS_MEM_CLKREF_CLK>; |
| 2129 |
clock-names = "ref", |
| 2130 |
"ref_aux", |
| 2131 |
"qref"; |
| 2132 |
|
| 2133 |
power-domains = <&gcc UFS_PHY_GDSC>; |
| 2134 |
|
| 2135 |
resets = <&ufs_mem_hc 0>; |
| 2136 |
reset-names = "ufsphy"; |
| 2137 |
|
| 2138 |
#phy-cells = <0>; |
| 2139 |
|
| 2140 |
status = "disabled"; |
| 2141 |
}; |
| 2142 |
|
| 2143 |
cryptobam: dma-controller@1dc4000 { |
| 2144 |
compatible = "qcom,bam-v1.7.4", "qcom,bam-v1.7.0"; |
| 2145 |
reg = <0 0x01dc4000 0 0x24000>; |
| 2146 |
interrupts = <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>; |
| 2147 |
#dma-cells = <1>; |
| 2148 |
qcom,ee = <0>; |
| 2149 |
qcom,controlled-remotely; |
| 2150 |
num-channels = <8>; |
| 2151 |
qcom,num-ees = <2>; |
| 2152 |
iommus = <&apps_smmu 0x502 0x0641>, |
| 2153 |
<&apps_smmu 0x504 0x0011>, |
| 2154 |
<&apps_smmu 0x506 0x0011>, |
| 2155 |
<&apps_smmu 0x508 0x0011>, |
| 2156 |
<&apps_smmu 0x512 0x0000>; |
| 2157 |
}; |
| 2158 |
|
| 2159 |
crypto: crypto@1dfa000 { |
| 2160 |
compatible = "qcom,sm8150-qce", "qcom,qce"; |
| 2161 |
reg = <0 0x01dfa000 0 0x6000>; |
| 2162 |
dmas = <&cryptobam 4>, <&cryptobam 5>; |
| 2163 |
dma-names = "rx", "tx"; |
| 2164 |
iommus = <&apps_smmu 0x502 0x0641>, |
| 2165 |
<&apps_smmu 0x504 0x0011>, |
| 2166 |
<&apps_smmu 0x506 0x0011>, |
| 2167 |
<&apps_smmu 0x508 0x0011>, |
| 2168 |
<&apps_smmu 0x512 0x0000>; |
| 2169 |
interconnects = <&aggre2_noc MASTER_CRYPTO_CORE_0 0 &mc_virt SLAVE_EBI_CH0 0>; |
| 2170 |
interconnect-names = "memory"; |
| 2171 |
}; |
| 2172 |
|
| 2173 |
tcsr_mutex: hwlock@1f40000 { |
| 2174 |
compatible = "qcom,tcsr-mutex"; |
| 2175 |
reg = <0x0 0x01f40000 0x0 0x20000>; |
| 2176 |
#hwlock-cells = <1>; |
| 2177 |
}; |
| 2178 |
|
| 2179 |
tcsr_regs_1: syscon@1f60000 { |
| 2180 |
compatible = "qcom,sm8150-tcsr", "syscon"; |
| 2181 |
reg = <0x0 0x01f60000 0x0 0x20000>; |
| 2182 |
}; |
| 2183 |
|
| 2184 |
remoteproc_slpi: remoteproc@2400000 { |
| 2185 |
compatible = "qcom,sm8150-slpi-pas"; |
| 2186 |
reg = <0x0 0x02400000 0x0 0x4040>; |
| 2187 |
|
| 2188 |
interrupts-extended = <&intc GIC_SPI 494 IRQ_TYPE_EDGE_RISING>, |
| 2189 |
<&slpi_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, |
| 2190 |
<&slpi_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, |
| 2191 |
<&slpi_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, |
| 2192 |
<&slpi_smp2p_in 3 IRQ_TYPE_EDGE_RISING>; |
| 2193 |
interrupt-names = "wdog", "fatal", "ready", |
| 2194 |
"handover", "stop-ack"; |
| 2195 |
|
| 2196 |
clocks = <&rpmhcc RPMH_CXO_CLK>; |
| 2197 |
clock-names = "xo"; |
| 2198 |
|
| 2199 |
power-domains = <&rpmhpd SM8150_LCX>, |
| 2200 |
<&rpmhpd SM8150_LMX>; |
| 2201 |
power-domain-names = "lcx", "lmx"; |
| 2202 |
|
| 2203 |
memory-region = <&slpi_mem>; |
| 2204 |
|
| 2205 |
qcom,qmp = <&aoss_qmp>; |
| 2206 |
|
| 2207 |
qcom,smem-states = <&slpi_smp2p_out 0>; |
| 2208 |
qcom,smem-state-names = "stop"; |
| 2209 |
|
| 2210 |
status = "disabled"; |
| 2211 |
|
| 2212 |
glink-edge { |
| 2213 |
interrupts = <GIC_SPI 170 IRQ_TYPE_EDGE_RISING>; |
| 2214 |
label = "dsps"; |
| 2215 |
qcom,remote-pid = <3>; |
| 2216 |
mboxes = <&apss_shared 24>; |
| 2217 |
|
| 2218 |
fastrpc { |
| 2219 |
compatible = "qcom,fastrpc"; |
| 2220 |
qcom,glink-channels = "fastrpcglink-apps-dsp"; |
| 2221 |
label = "sdsp"; |
| 2222 |
qcom,non-secure-domain; |
| 2223 |
#address-cells = <1>; |
| 2224 |
#size-cells = <0>; |
| 2225 |
|
| 2226 |
compute-cb@1 { |
| 2227 |
compatible = "qcom,fastrpc-compute-cb"; |
| 2228 |
reg = <1>; |
| 2229 |
iommus = <&apps_smmu 0x05a1 0x0>; |
| 2230 |
}; |
| 2231 |
|
| 2232 |
compute-cb@2 { |
| 2233 |
compatible = "qcom,fastrpc-compute-cb"; |
| 2234 |
reg = <2>; |
| 2235 |
iommus = <&apps_smmu 0x05a2 0x0>; |
| 2236 |
}; |
| 2237 |
|
| 2238 |
compute-cb@3 { |
| 2239 |
compatible = "qcom,fastrpc-compute-cb"; |
| 2240 |
reg = <3>; |
| 2241 |
iommus = <&apps_smmu 0x05a3 0x0>; |
| 2242 |
/* note: shared-cb = <4> in downstream */ |
| 2243 |
}; |
| 2244 |
}; |
| 2245 |
}; |
| 2246 |
}; |
| 2247 |
|
| 2248 |
gpu: gpu@2c00000 { |
| 2249 |
compatible = "qcom,adreno-640.1", "qcom,adreno"; |
| 2250 |
reg = <0 0x02c00000 0 0x40000>; |
| 2251 |
reg-names = "kgsl_3d0_reg_memory"; |
| 2252 |
|
| 2253 |
interrupts = <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>; |
| 2254 |
|
| 2255 |
iommus = <&adreno_smmu 0 0x401>; |
| 2256 |
|
| 2257 |
operating-points-v2 = <&gpu_opp_table>; |
| 2258 |
|
| 2259 |
qcom,gmu = <&gmu>; |
| 2260 |
|
| 2261 |
nvmem-cells = <&gpu_speed_bin>; |
| 2262 |
nvmem-cell-names = "speed_bin"; |
| 2263 |
#cooling-cells = <2>; |
| 2264 |
|
| 2265 |
status = "disabled"; |
| 2266 |
|
| 2267 |
gpu_zap_shader: zap-shader { |
| 2268 |
memory-region = <&gpu_mem>; |
| 2269 |
}; |
| 2270 |
|
| 2271 |
gpu_opp_table: opp-table { |
| 2272 |
compatible = "operating-points-v2"; |
| 2273 |
|
| 2274 |
opp-675000000 { |
| 2275 |
opp-hz = /bits/ 64 <675000000>; |
| 2276 |
opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>; |
| 2277 |
opp-supported-hw = <0x2>; |
| 2278 |
}; |
| 2279 |
|
| 2280 |
opp-585000000 { |
| 2281 |
opp-hz = /bits/ 64 <585000000>; |
| 2282 |
opp-level = <RPMH_REGULATOR_LEVEL_NOM>; |
| 2283 |
opp-supported-hw = <0x3>; |
| 2284 |
}; |
| 2285 |
|
| 2286 |
opp-499200000 { |
| 2287 |
opp-hz = /bits/ 64 <499200000>; |
| 2288 |
opp-level = <RPMH_REGULATOR_LEVEL_SVS_L2>; |
| 2289 |
opp-supported-hw = <0x3>; |
| 2290 |
}; |
| 2291 |
|
| 2292 |
opp-427000000 { |
| 2293 |
opp-hz = /bits/ 64 <427000000>; |
| 2294 |
opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>; |
| 2295 |
opp-supported-hw = <0x3>; |
| 2296 |
}; |
| 2297 |
|
| 2298 |
opp-345000000 { |
| 2299 |
opp-hz = /bits/ 64 <345000000>; |
| 2300 |
opp-level = <RPMH_REGULATOR_LEVEL_SVS>; |
| 2301 |
opp-supported-hw = <0x3>; |
| 2302 |
}; |
| 2303 |
|
| 2304 |
opp-257000000 { |
| 2305 |
opp-hz = /bits/ 64 <257000000>; |
| 2306 |
opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>; |
| 2307 |
opp-supported-hw = <0x3>; |
| 2308 |
}; |
| 2309 |
}; |
| 2310 |
}; |
| 2311 |
|
| 2312 |
gmu: gmu@2c6a000 { |
| 2313 |
compatible = "qcom,adreno-gmu-640.1", "qcom,adreno-gmu"; |
| 2314 |
|
| 2315 |
reg = <0 0x02c6a000 0 0x30000>, |
| 2316 |
<0 0x0b290000 0 0x10000>, |
| 2317 |
<0 0x0b490000 0 0x10000>; |
| 2318 |
reg-names = "gmu", "gmu_pdc", "gmu_pdc_seq"; |
| 2319 |
|
| 2320 |
interrupts = <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>, |
| 2321 |
<GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>; |
| 2322 |
interrupt-names = "hfi", "gmu"; |
| 2323 |
|
| 2324 |
clocks = <&gpucc GPU_CC_AHB_CLK>, |
| 2325 |
<&gpucc GPU_CC_CX_GMU_CLK>, |
| 2326 |
<&gpucc GPU_CC_CXO_CLK>, |
| 2327 |
<&gcc GCC_DDRSS_GPU_AXI_CLK>, |
| 2328 |
<&gcc GCC_GPU_MEMNOC_GFX_CLK>; |
| 2329 |
clock-names = "ahb", "gmu", "cxo", "axi", "memnoc"; |
| 2330 |
|
| 2331 |
power-domains = <&gpucc GPU_CX_GDSC>, |
| 2332 |
<&gpucc GPU_GX_GDSC>; |
| 2333 |
power-domain-names = "cx", "gx"; |
| 2334 |
|
| 2335 |
iommus = <&adreno_smmu 5 0x400>; |
| 2336 |
|
| 2337 |
operating-points-v2 = <&gmu_opp_table>; |
| 2338 |
|
| 2339 |
status = "disabled"; |
| 2340 |
|
| 2341 |
gmu_opp_table: opp-table { |
| 2342 |
compatible = "operating-points-v2"; |
| 2343 |
|
| 2344 |
opp-200000000 { |
| 2345 |
opp-hz = /bits/ 64 <200000000>; |
| 2346 |
opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>; |
| 2347 |
}; |
| 2348 |
}; |
| 2349 |
}; |
| 2350 |
|
| 2351 |
gpucc: clock-controller@2c90000 { |
| 2352 |
compatible = "qcom,sm8150-gpucc"; |
| 2353 |
reg = <0 0x02c90000 0 0x9000>; |
| 2354 |
clocks = <&rpmhcc RPMH_CXO_CLK>, |
| 2355 |
<&gcc GCC_GPU_GPLL0_CLK_SRC>, |
| 2356 |
<&gcc GCC_GPU_GPLL0_DIV_CLK_SRC>; |
| 2357 |
clock-names = "bi_tcxo", |
| 2358 |
"gcc_gpu_gpll0_clk_src", |
| 2359 |
"gcc_gpu_gpll0_div_clk_src"; |
| 2360 |
#clock-cells = <1>; |
| 2361 |
#reset-cells = <1>; |
| 2362 |
#power-domain-cells = <1>; |
| 2363 |
}; |
| 2364 |
|
| 2365 |
adreno_smmu: iommu@2ca0000 { |
| 2366 |
compatible = "qcom,sm8150-smmu-500", "qcom,adreno-smmu", |
| 2367 |
"qcom,smmu-500", "arm,mmu-500"; |
| 2368 |
reg = <0 0x02ca0000 0 0x10000>; |
| 2369 |
#iommu-cells = <2>; |
| 2370 |
#global-interrupts = <1>; |
| 2371 |
interrupts = <GIC_SPI 674 IRQ_TYPE_LEVEL_HIGH>, |
| 2372 |
<GIC_SPI 681 IRQ_TYPE_LEVEL_HIGH>, |
| 2373 |
<GIC_SPI 682 IRQ_TYPE_LEVEL_HIGH>, |
| 2374 |
<GIC_SPI 683 IRQ_TYPE_LEVEL_HIGH>, |
| 2375 |
<GIC_SPI 684 IRQ_TYPE_LEVEL_HIGH>, |
| 2376 |
<GIC_SPI 685 IRQ_TYPE_LEVEL_HIGH>, |
| 2377 |
<GIC_SPI 686 IRQ_TYPE_LEVEL_HIGH>, |
| 2378 |
<GIC_SPI 687 IRQ_TYPE_LEVEL_HIGH>, |
| 2379 |
<GIC_SPI 688 IRQ_TYPE_LEVEL_HIGH>; |
| 2380 |
clocks = <&gpucc GPU_CC_AHB_CLK>, |
| 2381 |
<&gcc GCC_GPU_MEMNOC_GFX_CLK>, |
| 2382 |
<&gcc GCC_GPU_SNOC_DVM_GFX_CLK>; |
| 2383 |
clock-names = "ahb", "bus", "iface"; |
| 2384 |
|
| 2385 |
power-domains = <&gpucc GPU_CX_GDSC>; |
| 2386 |
}; |
| 2387 |
|
| 2388 |
tlmm: pinctrl@3100000 { |
| 2389 |
compatible = "qcom,sm8150-pinctrl"; |
| 2390 |
reg = <0x0 0x03100000 0x0 0x300000>, |
| 2391 |
<0x0 0x03500000 0x0 0x300000>, |
| 2392 |
<0x0 0x03900000 0x0 0x300000>, |
| 2393 |
<0x0 0x03d00000 0x0 0x300000>; |
| 2394 |
reg-names = "west", "east", "north", "south"; |
| 2395 |
interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; |
| 2396 |
gpio-ranges = <&tlmm 0 0 176>; |
| 2397 |
gpio-controller; |
| 2398 |
#gpio-cells = <2>; |
| 2399 |
interrupt-controller; |
| 2400 |
#interrupt-cells = <2>; |
| 2401 |
wakeup-parent = <&pdc>; |
| 2402 |
|
| 2403 |
qup_i2c0_default: qup-i2c0-default-state { |
| 2404 |
pins = "gpio0", "gpio1"; |
| 2405 |
function = "qup0"; |
| 2406 |
drive-strength = <0x02>; |
| 2407 |
bias-disable; |
| 2408 |
}; |
| 2409 |
|
| 2410 |
qup_spi0_default: qup-spi0-default-state { |
| 2411 |
pins = "gpio0", "gpio1", "gpio2", "gpio3"; |
| 2412 |
function = "qup0"; |
| 2413 |
drive-strength = <6>; |
| 2414 |
bias-disable; |
| 2415 |
}; |
| 2416 |
|
| 2417 |
qup_i2c1_default: qup-i2c1-default-state { |
| 2418 |
pins = "gpio114", "gpio115"; |
| 2419 |
function = "qup1"; |
| 2420 |
drive-strength = <2>; |
| 2421 |
bias-disable; |
| 2422 |
}; |
| 2423 |
|
| 2424 |
qup_spi1_default: qup-spi1-default-state { |
| 2425 |
pins = "gpio114", "gpio115", "gpio116", "gpio117"; |
| 2426 |
function = "qup1"; |
| 2427 |
drive-strength = <6>; |
| 2428 |
bias-disable; |
| 2429 |
}; |
| 2430 |
|
| 2431 |
qup_i2c2_default: qup-i2c2-default-state { |
| 2432 |
pins = "gpio126", "gpio127"; |
| 2433 |
function = "qup2"; |
| 2434 |
drive-strength = <2>; |
| 2435 |
bias-disable; |
| 2436 |
}; |
| 2437 |
|
| 2438 |
qup_spi2_default: qup-spi2-default-state { |
| 2439 |
pins = "gpio126", "gpio127", "gpio128", "gpio129"; |
| 2440 |
function = "qup2"; |
| 2441 |
drive-strength = <6>; |
| 2442 |
bias-disable; |
| 2443 |
}; |
| 2444 |
|
| 2445 |
qup_i2c3_default: qup-i2c3-default-state { |
| 2446 |
pins = "gpio144", "gpio145"; |
| 2447 |
function = "qup3"; |
| 2448 |
drive-strength = <2>; |
| 2449 |
bias-disable; |
| 2450 |
}; |
| 2451 |
|
| 2452 |
qup_spi3_default: qup-spi3-default-state { |
| 2453 |
pins = "gpio144", "gpio145", "gpio146", "gpio147"; |
| 2454 |
function = "qup3"; |
| 2455 |
drive-strength = <6>; |
| 2456 |
bias-disable; |
| 2457 |
}; |
| 2458 |
|
| 2459 |
qup_i2c4_default: qup-i2c4-default-state { |
| 2460 |
pins = "gpio51", "gpio52"; |
| 2461 |
function = "qup4"; |
| 2462 |
drive-strength = <2>; |
| 2463 |
bias-disable; |
| 2464 |
}; |
| 2465 |
|
| 2466 |
qup_spi4_default: qup-spi4-default-state { |
| 2467 |
pins = "gpio51", "gpio52", "gpio53", "gpio54"; |
| 2468 |
function = "qup4"; |
| 2469 |
drive-strength = <6>; |
| 2470 |
bias-disable; |
| 2471 |
}; |
| 2472 |
|
| 2473 |
qup_i2c5_default: qup-i2c5-default-state { |
| 2474 |
pins = "gpio121", "gpio122"; |
| 2475 |
function = "qup5"; |
| 2476 |
drive-strength = <2>; |
| 2477 |
bias-disable; |
| 2478 |
}; |
| 2479 |
|
| 2480 |
qup_spi5_default: qup-spi5-default-state { |
| 2481 |
pins = "gpio119", "gpio120", "gpio121", "gpio122"; |
| 2482 |
function = "qup5"; |
| 2483 |
drive-strength = <6>; |
| 2484 |
bias-disable; |
| 2485 |
}; |
| 2486 |
|
| 2487 |
qup_i2c6_default: qup-i2c6-default-state { |
| 2488 |
pins = "gpio6", "gpio7"; |
| 2489 |
function = "qup6"; |
| 2490 |
drive-strength = <2>; |
| 2491 |
bias-disable; |
| 2492 |
}; |
| 2493 |
|
| 2494 |
qup_spi6_default: qup-spi6-default-state { |
| 2495 |
pins = "gpio4", "gpio5", "gpio6", "gpio7"; |
| 2496 |
function = "qup6"; |
| 2497 |
drive-strength = <6>; |
| 2498 |
bias-disable; |
| 2499 |
}; |
| 2500 |
|
| 2501 |
qup_i2c7_default: qup-i2c7-default-state { |
| 2502 |
pins = "gpio98", "gpio99"; |
| 2503 |
function = "qup7"; |
| 2504 |
drive-strength = <2>; |
| 2505 |
bias-disable; |
| 2506 |
}; |
| 2507 |
|
| 2508 |
qup_spi7_default: qup-spi7-default-state { |
| 2509 |
pins = "gpio98", "gpio99", "gpio100", "gpio101"; |
| 2510 |
function = "qup7"; |
| 2511 |
drive-strength = <6>; |
| 2512 |
bias-disable; |
| 2513 |
}; |
| 2514 |
|
| 2515 |
qup_i2c8_default: qup-i2c8-default-state { |
| 2516 |
pins = "gpio88", "gpio89"; |
| 2517 |
function = "qup8"; |
| 2518 |
drive-strength = <2>; |
| 2519 |
bias-disable; |
| 2520 |
}; |
| 2521 |
|
| 2522 |
qup_spi8_default: qup-spi8-default-state { |
| 2523 |
pins = "gpio88", "gpio89", "gpio90", "gpio91"; |
| 2524 |
function = "qup8"; |
| 2525 |
drive-strength = <6>; |
| 2526 |
bias-disable; |
| 2527 |
}; |
| 2528 |
|
| 2529 |
qup_i2c9_default: qup-i2c9-default-state { |
| 2530 |
pins = "gpio39", "gpio40"; |
| 2531 |
function = "qup9"; |
| 2532 |
drive-strength = <2>; |
| 2533 |
bias-disable; |
| 2534 |
}; |
| 2535 |
|
| 2536 |
qup_spi9_default: qup-spi9-default-state { |
| 2537 |
pins = "gpio39", "gpio40", "gpio41", "gpio42"; |
| 2538 |
function = "qup9"; |
| 2539 |
drive-strength = <6>; |
| 2540 |
bias-disable; |
| 2541 |
}; |
| 2542 |
|
| 2543 |
qup_uart9_default: qup-uart9-default-state { |
| 2544 |
pins = "gpio41", "gpio42"; |
| 2545 |
function = "qup9"; |
| 2546 |
drive-strength = <2>; |
| 2547 |
bias-disable; |
| 2548 |
}; |
| 2549 |
|
| 2550 |
qup_i2c10_default: qup-i2c10-default-state { |
| 2551 |
pins = "gpio9", "gpio10"; |
| 2552 |
function = "qup10"; |
| 2553 |
drive-strength = <2>; |
| 2554 |
bias-disable; |
| 2555 |
}; |
| 2556 |
|
| 2557 |
qup_spi10_default: qup-spi10-default-state { |
| 2558 |
pins = "gpio9", "gpio10", "gpio11", "gpio12"; |
| 2559 |
function = "qup10"; |
| 2560 |
drive-strength = <6>; |
| 2561 |
bias-disable; |
| 2562 |
}; |
| 2563 |
|
| 2564 |
qup_i2c11_default: qup-i2c11-default-state { |
| 2565 |
pins = "gpio94", "gpio95"; |
| 2566 |
function = "qup11"; |
| 2567 |
drive-strength = <2>; |
| 2568 |
bias-disable; |
| 2569 |
}; |
| 2570 |
|
| 2571 |
qup_spi11_default: qup-spi11-default-state { |
| 2572 |
pins = "gpio92", "gpio93", "gpio94", "gpio95"; |
| 2573 |
function = "qup11"; |
| 2574 |
drive-strength = <6>; |
| 2575 |
bias-disable; |
| 2576 |
}; |
| 2577 |
|
| 2578 |
qup_i2c12_default: qup-i2c12-default-state { |
| 2579 |
pins = "gpio83", "gpio84"; |
| 2580 |
function = "qup12"; |
| 2581 |
drive-strength = <2>; |
| 2582 |
bias-disable; |
| 2583 |
}; |
| 2584 |
|
| 2585 |
qup_spi12_default: qup-spi12-default-state { |
| 2586 |
pins = "gpio83", "gpio84", "gpio85", "gpio86"; |
| 2587 |
function = "qup12"; |
| 2588 |
drive-strength = <6>; |
| 2589 |
bias-disable; |
| 2590 |
}; |
| 2591 |
|
| 2592 |
qup_i2c13_default: qup-i2c13-default-state { |
| 2593 |
pins = "gpio43", "gpio44"; |
| 2594 |
function = "qup13"; |
| 2595 |
drive-strength = <2>; |
| 2596 |
bias-disable; |
| 2597 |
}; |
| 2598 |
|
| 2599 |
qup_spi13_default: qup-spi13-default-state { |
| 2600 |
pins = "gpio43", "gpio44", "gpio45", "gpio46"; |
| 2601 |
function = "qup13"; |
| 2602 |
drive-strength = <6>; |
| 2603 |
bias-disable; |
| 2604 |
}; |
| 2605 |
|
| 2606 |
qup_i2c14_default: qup-i2c14-default-state { |
| 2607 |
pins = "gpio47", "gpio48"; |
| 2608 |
function = "qup14"; |
| 2609 |
drive-strength = <2>; |
| 2610 |
bias-disable; |
| 2611 |
}; |
| 2612 |
|
| 2613 |
qup_spi14_default: qup-spi14-default-state { |
| 2614 |
pins = "gpio47", "gpio48", "gpio49", "gpio50"; |
| 2615 |
function = "qup14"; |
| 2616 |
drive-strength = <6>; |
| 2617 |
bias-disable; |
| 2618 |
}; |
| 2619 |
|
| 2620 |
qup_i2c15_default: qup-i2c15-default-state { |
| 2621 |
pins = "gpio27", "gpio28"; |
| 2622 |
function = "qup15"; |
| 2623 |
drive-strength = <2>; |
| 2624 |
bias-disable; |
| 2625 |
}; |
| 2626 |
|
| 2627 |
qup_spi15_default: qup-spi15-default-state { |
| 2628 |
pins = "gpio27", "gpio28", "gpio29", "gpio30"; |
| 2629 |
function = "qup15"; |
| 2630 |
drive-strength = <6>; |
| 2631 |
bias-disable; |
| 2632 |
}; |
| 2633 |
|
| 2634 |
qup_i2c16_default: qup-i2c16-default-state { |
| 2635 |
pins = "gpio86", "gpio85"; |
| 2636 |
function = "qup16"; |
| 2637 |
drive-strength = <2>; |
| 2638 |
bias-disable; |
| 2639 |
}; |
| 2640 |
|
| 2641 |
qup_spi16_default: qup-spi16-default-state { |
| 2642 |
pins = "gpio83", "gpio84", "gpio85", "gpio86"; |
| 2643 |
function = "qup16"; |
| 2644 |
drive-strength = <6>; |
| 2645 |
bias-disable; |
| 2646 |
}; |
| 2647 |
|
| 2648 |
qup_i2c17_default: qup-i2c17-default-state { |
| 2649 |
pins = "gpio55", "gpio56"; |
| 2650 |
function = "qup17"; |
| 2651 |
drive-strength = <2>; |
| 2652 |
bias-disable; |
| 2653 |
}; |
| 2654 |
|
| 2655 |
qup_spi17_default: qup-spi17-default-state { |
| 2656 |
pins = "gpio55", "gpio56", "gpio57", "gpio58"; |
| 2657 |
function = "qup17"; |
| 2658 |
drive-strength = <6>; |
| 2659 |
bias-disable; |
| 2660 |
}; |
| 2661 |
|
| 2662 |
qup_i2c18_default: qup-i2c18-default-state { |
| 2663 |
pins = "gpio23", "gpio24"; |
| 2664 |
function = "qup18"; |
| 2665 |
drive-strength = <2>; |
| 2666 |
bias-disable; |
| 2667 |
}; |
| 2668 |
|
| 2669 |
qup_spi18_default: qup-spi18-default-state { |
| 2670 |
pins = "gpio23", "gpio24", "gpio25", "gpio26"; |
| 2671 |
function = "qup18"; |
| 2672 |
drive-strength = <6>; |
| 2673 |
bias-disable; |
| 2674 |
}; |
| 2675 |
|
| 2676 |
qup_i2c19_default: qup-i2c19-default-state { |
| 2677 |
pins = "gpio57", "gpio58"; |
| 2678 |
function = "qup19"; |
| 2679 |
drive-strength = <2>; |
| 2680 |
bias-disable; |
| 2681 |
}; |
| 2682 |
|
| 2683 |
qup_spi19_default: qup-spi19-default-state { |
| 2684 |
pins = "gpio55", "gpio56", "gpio57", "gpio58"; |
| 2685 |
function = "qup19"; |
| 2686 |
drive-strength = <6>; |
| 2687 |
bias-disable; |
| 2688 |
}; |
| 2689 |
|
| 2690 |
pcie0_default_state: pcie0-default-state { |
| 2691 |
perst-pins { |
| 2692 |
pins = "gpio35"; |
| 2693 |
function = "gpio"; |
| 2694 |
drive-strength = <2>; |
| 2695 |
bias-pull-down; |
| 2696 |
}; |
| 2697 |
|
| 2698 |
clkreq-pins { |
| 2699 |
pins = "gpio36"; |
| 2700 |
function = "pci_e0"; |
| 2701 |
drive-strength = <2>; |
| 2702 |
bias-pull-up; |
| 2703 |
}; |
| 2704 |
|
| 2705 |
wake-pins { |
| 2706 |
pins = "gpio37"; |
| 2707 |
function = "gpio"; |
| 2708 |
drive-strength = <2>; |
| 2709 |
bias-pull-up; |
| 2710 |
}; |
| 2711 |
}; |
| 2712 |
|
| 2713 |
pcie1_default_state: pcie1-default-state { |
| 2714 |
perst-pins { |
| 2715 |
pins = "gpio102"; |
| 2716 |
function = "gpio"; |
| 2717 |
drive-strength = <2>; |
| 2718 |
bias-pull-down; |
| 2719 |
}; |
| 2720 |
|
| 2721 |
clkreq-pins { |
| 2722 |
pins = "gpio103"; |
| 2723 |
function = "pci_e1"; |
| 2724 |
drive-strength = <2>; |
| 2725 |
bias-pull-up; |
| 2726 |
}; |
| 2727 |
|
| 2728 |
wake-pins { |
| 2729 |
pins = "gpio104"; |
| 2730 |
function = "gpio"; |
| 2731 |
drive-strength = <2>; |
| 2732 |
bias-pull-up; |
| 2733 |
}; |
| 2734 |
}; |
| 2735 |
}; |
| 2736 |
|
| 2737 |
remoteproc_mpss: remoteproc@4080000 { |
| 2738 |
compatible = "qcom,sm8150-mpss-pas"; |
| 2739 |
reg = <0x0 0x04080000 0x0 0x4040>; |
| 2740 |
|
| 2741 |
interrupts-extended = <&intc GIC_SPI 266 IRQ_TYPE_EDGE_RISING>, |
| 2742 |
<&modem_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, |
| 2743 |
<&modem_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, |
| 2744 |
<&modem_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, |
| 2745 |
<&modem_smp2p_in 3 IRQ_TYPE_EDGE_RISING>, |
| 2746 |
<&modem_smp2p_in 7 IRQ_TYPE_EDGE_RISING>; |
| 2747 |
interrupt-names = "wdog", "fatal", "ready", "handover", |
| 2748 |
"stop-ack", "shutdown-ack"; |
| 2749 |
|
| 2750 |
clocks = <&rpmhcc RPMH_CXO_CLK>; |
| 2751 |
clock-names = "xo"; |
| 2752 |
|
| 2753 |
power-domains = <&rpmhpd SM8150_CX>, |
| 2754 |
<&rpmhpd SM8150_MSS>; |
| 2755 |
power-domain-names = "cx", "mss"; |
| 2756 |
|
| 2757 |
memory-region = <&mpss_mem>; |
| 2758 |
|
| 2759 |
qcom,qmp = <&aoss_qmp>; |
| 2760 |
|
| 2761 |
qcom,smem-states = <&modem_smp2p_out 0>; |
| 2762 |
qcom,smem-state-names = "stop"; |
| 2763 |
|
| 2764 |
status = "disabled"; |
| 2765 |
|
| 2766 |
glink-edge { |
| 2767 |
interrupts = <GIC_SPI 449 IRQ_TYPE_EDGE_RISING>; |
| 2768 |
label = "modem"; |
| 2769 |
qcom,remote-pid = <1>; |
| 2770 |
mboxes = <&apss_shared 12>; |
| 2771 |
}; |
| 2772 |
}; |
| 2773 |
|
| 2774 |
stm@6002000 { |
| 2775 |
compatible = "arm,coresight-stm", "arm,primecell"; |
| 2776 |
reg = <0 0x06002000 0 0x1000>, |
| 2777 |
<0 0x16280000 0 0x180000>; |
| 2778 |
reg-names = "stm-base", "stm-stimulus-base"; |
| 2779 |
|
| 2780 |
clocks = <&aoss_qmp>; |
| 2781 |
clock-names = "apb_pclk"; |
| 2782 |
|
| 2783 |
out-ports { |
| 2784 |
port { |
| 2785 |
stm_out: endpoint { |
| 2786 |
remote-endpoint = <&funnel0_in7>; |
| 2787 |
}; |
| 2788 |
}; |
| 2789 |
}; |
| 2790 |
}; |
| 2791 |
|
| 2792 |
funnel@6041000 { |
| 2793 |
compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; |
| 2794 |
reg = <0 0x06041000 0 0x1000>; |
| 2795 |
|
| 2796 |
clocks = <&aoss_qmp>; |
| 2797 |
clock-names = "apb_pclk"; |
| 2798 |
|
| 2799 |
out-ports { |
| 2800 |
port { |
| 2801 |
funnel0_out: endpoint { |
| 2802 |
remote-endpoint = <&merge_funnel_in0>; |
| 2803 |
}; |
| 2804 |
}; |
| 2805 |
}; |
| 2806 |
|
| 2807 |
in-ports { |
| 2808 |
#address-cells = <1>; |
| 2809 |
#size-cells = <0>; |
| 2810 |
|
| 2811 |
port@7 { |
| 2812 |
reg = <7>; |
| 2813 |
funnel0_in7: endpoint { |
| 2814 |
remote-endpoint = <&stm_out>; |
| 2815 |
}; |
| 2816 |
}; |
| 2817 |
}; |
| 2818 |
}; |
| 2819 |
|
| 2820 |
funnel@6042000 { |
| 2821 |
compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; |
| 2822 |
reg = <0 0x06042000 0 0x1000>; |
| 2823 |
|
| 2824 |
clocks = <&aoss_qmp>; |
| 2825 |
clock-names = "apb_pclk"; |
| 2826 |
|
| 2827 |
out-ports { |
| 2828 |
port { |
| 2829 |
funnel1_out: endpoint { |
| 2830 |
remote-endpoint = <&merge_funnel_in1>; |
| 2831 |
}; |
| 2832 |
}; |
| 2833 |
}; |
| 2834 |
|
| 2835 |
in-ports { |
| 2836 |
#address-cells = <1>; |
| 2837 |
#size-cells = <0>; |
| 2838 |
|
| 2839 |
port@4 { |
| 2840 |
reg = <4>; |
| 2841 |
funnel1_in4: endpoint { |
| 2842 |
remote-endpoint = <&swao_replicator_out>; |
| 2843 |
}; |
| 2844 |
}; |
| 2845 |
}; |
| 2846 |
}; |
| 2847 |
|
| 2848 |
funnel@6043000 { |
| 2849 |
compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; |
| 2850 |
reg = <0 0x06043000 0 0x1000>; |
| 2851 |
|
| 2852 |
clocks = <&aoss_qmp>; |
| 2853 |
clock-names = "apb_pclk"; |
| 2854 |
|
| 2855 |
out-ports { |
| 2856 |
port { |
| 2857 |
funnel2_out: endpoint { |
| 2858 |
remote-endpoint = <&merge_funnel_in2>; |
| 2859 |
}; |
| 2860 |
}; |
| 2861 |
}; |
| 2862 |
|
| 2863 |
in-ports { |
| 2864 |
#address-cells = <1>; |
| 2865 |
#size-cells = <0>; |
| 2866 |
|
| 2867 |
port@2 { |
| 2868 |
reg = <2>; |
| 2869 |
funnel2_in2: endpoint { |
| 2870 |
remote-endpoint = <&apss_merge_funnel_out>; |
| 2871 |
}; |
| 2872 |
}; |
| 2873 |
}; |
| 2874 |
}; |
| 2875 |
|
| 2876 |
funnel@6045000 { |
| 2877 |
compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; |
| 2878 |
reg = <0 0x06045000 0 0x1000>; |
| 2879 |
|
| 2880 |
clocks = <&aoss_qmp>; |
| 2881 |
clock-names = "apb_pclk"; |
| 2882 |
|
| 2883 |
out-ports { |
| 2884 |
port { |
| 2885 |
merge_funnel_out: endpoint { |
| 2886 |
remote-endpoint = <&etf_in>; |
| 2887 |
}; |
| 2888 |
}; |
| 2889 |
}; |
| 2890 |
|
| 2891 |
in-ports { |
| 2892 |
#address-cells = <1>; |
| 2893 |
#size-cells = <0>; |
| 2894 |
|
| 2895 |
port@0 { |
| 2896 |
reg = <0>; |
| 2897 |
merge_funnel_in0: endpoint { |
| 2898 |
remote-endpoint = <&funnel0_out>; |
| 2899 |
}; |
| 2900 |
}; |
| 2901 |
|
| 2902 |
port@1 { |
| 2903 |
reg = <1>; |
| 2904 |
merge_funnel_in1: endpoint { |
| 2905 |
remote-endpoint = <&funnel1_out>; |
| 2906 |
}; |
| 2907 |
}; |
| 2908 |
|
| 2909 |
port@2 { |
| 2910 |
reg = <2>; |
| 2911 |
merge_funnel_in2: endpoint { |
| 2912 |
remote-endpoint = <&funnel2_out>; |
| 2913 |
}; |
| 2914 |
}; |
| 2915 |
}; |
| 2916 |
}; |
| 2917 |
|
| 2918 |
replicator@6046000 { |
| 2919 |
compatible = "arm,coresight-dynamic-replicator", "arm,primecell"; |
| 2920 |
reg = <0 0x06046000 0 0x1000>; |
| 2921 |
|
| 2922 |
clocks = <&aoss_qmp>; |
| 2923 |
clock-names = "apb_pclk"; |
| 2924 |
|
| 2925 |
out-ports { |
| 2926 |
#address-cells = <1>; |
| 2927 |
#size-cells = <0>; |
| 2928 |
|
| 2929 |
port@0 { |
| 2930 |
reg = <0>; |
| 2931 |
replicator_out0: endpoint { |
| 2932 |
remote-endpoint = <&etr_in>; |
| 2933 |
}; |
| 2934 |
}; |
| 2935 |
|
| 2936 |
port@1 { |
| 2937 |
reg = <1>; |
| 2938 |
replicator_out1: endpoint { |
| 2939 |
remote-endpoint = <&replicator1_in>; |
| 2940 |
}; |
| 2941 |
}; |
| 2942 |
}; |
| 2943 |
|
| 2944 |
in-ports { |
| 2945 |
port { |
| 2946 |
replicator_in0: endpoint { |
| 2947 |
remote-endpoint = <&etf_out>; |
| 2948 |
}; |
| 2949 |
}; |
| 2950 |
}; |
| 2951 |
}; |
| 2952 |
|
| 2953 |
etf@6047000 { |
| 2954 |
compatible = "arm,coresight-tmc", "arm,primecell"; |
| 2955 |
reg = <0 0x06047000 0 0x1000>; |
| 2956 |
|
| 2957 |
clocks = <&aoss_qmp>; |
| 2958 |
clock-names = "apb_pclk"; |
| 2959 |
|
| 2960 |
out-ports { |
| 2961 |
port { |
| 2962 |
etf_out: endpoint { |
| 2963 |
remote-endpoint = <&replicator_in0>; |
| 2964 |
}; |
| 2965 |
}; |
| 2966 |
}; |
| 2967 |
|
| 2968 |
in-ports { |
| 2969 |
port { |
| 2970 |
etf_in: endpoint { |
| 2971 |
remote-endpoint = <&merge_funnel_out>; |
| 2972 |
}; |
| 2973 |
}; |
| 2974 |
}; |
| 2975 |
}; |
| 2976 |
|
| 2977 |
etr@6048000 { |
| 2978 |
compatible = "arm,coresight-tmc", "arm,primecell"; |
| 2979 |
reg = <0 0x06048000 0 0x1000>; |
| 2980 |
iommus = <&apps_smmu 0x05e0 0x0>; |
| 2981 |
|
| 2982 |
clocks = <&aoss_qmp>; |
| 2983 |
clock-names = "apb_pclk"; |
| 2984 |
arm,scatter-gather; |
| 2985 |
|
| 2986 |
in-ports { |
| 2987 |
port { |
| 2988 |
etr_in: endpoint { |
| 2989 |
remote-endpoint = <&replicator_out0>; |
| 2990 |
}; |
| 2991 |
}; |
| 2992 |
}; |
| 2993 |
}; |
| 2994 |
|
| 2995 |
replicator@604a000 { |
| 2996 |
compatible = "arm,coresight-dynamic-replicator", "arm,primecell"; |
| 2997 |
reg = <0 0x0604a000 0 0x1000>; |
| 2998 |
|
| 2999 |
clocks = <&aoss_qmp>; |
| 3000 |
clock-names = "apb_pclk"; |
| 3001 |
|
| 3002 |
out-ports { |
| 3003 |
#address-cells = <1>; |
| 3004 |
#size-cells = <0>; |
| 3005 |
|
| 3006 |
port@1 { |
| 3007 |
reg = <1>; |
| 3008 |
replicator1_out: endpoint { |
| 3009 |
remote-endpoint = <&swao_funnel_in>; |
| 3010 |
}; |
| 3011 |
}; |
| 3012 |
}; |
| 3013 |
|
| 3014 |
in-ports { |
| 3015 |
|
| 3016 |
port { |
| 3017 |
replicator1_in: endpoint { |
| 3018 |
remote-endpoint = <&replicator_out1>; |
| 3019 |
}; |
| 3020 |
}; |
| 3021 |
}; |
| 3022 |
}; |
| 3023 |
|
| 3024 |
funnel@6b08000 { |
| 3025 |
compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; |
| 3026 |
reg = <0 0x06b08000 0 0x1000>; |
| 3027 |
|
| 3028 |
clocks = <&aoss_qmp>; |
| 3029 |
clock-names = "apb_pclk"; |
| 3030 |
|
| 3031 |
out-ports { |
| 3032 |
port { |
| 3033 |
swao_funnel_out: endpoint { |
| 3034 |
remote-endpoint = <&swao_etf_in>; |
| 3035 |
}; |
| 3036 |
}; |
| 3037 |
}; |
| 3038 |
|
| 3039 |
in-ports { |
| 3040 |
#address-cells = <1>; |
| 3041 |
#size-cells = <0>; |
| 3042 |
|
| 3043 |
port@6 { |
| 3044 |
reg = <6>; |
| 3045 |
swao_funnel_in: endpoint { |
| 3046 |
remote-endpoint = <&replicator1_out>; |
| 3047 |
}; |
| 3048 |
}; |
| 3049 |
}; |
| 3050 |
}; |
| 3051 |
|
| 3052 |
etf@6b09000 { |
| 3053 |
compatible = "arm,coresight-tmc", "arm,primecell"; |
| 3054 |
reg = <0 0x06b09000 0 0x1000>; |
| 3055 |
|
| 3056 |
clocks = <&aoss_qmp>; |
| 3057 |
clock-names = "apb_pclk"; |
| 3058 |
|
| 3059 |
out-ports { |
| 3060 |
port { |
| 3061 |
swao_etf_out: endpoint { |
| 3062 |
remote-endpoint = <&swao_replicator_in>; |
| 3063 |
}; |
| 3064 |
}; |
| 3065 |
}; |
| 3066 |
|
| 3067 |
in-ports { |
| 3068 |
port { |
| 3069 |
swao_etf_in: endpoint { |
| 3070 |
remote-endpoint = <&swao_funnel_out>; |
| 3071 |
}; |
| 3072 |
}; |
| 3073 |
}; |
| 3074 |
}; |
| 3075 |
|
| 3076 |
replicator@6b0a000 { |
| 3077 |
compatible = "arm,coresight-dynamic-replicator", "arm,primecell"; |
| 3078 |
reg = <0 0x06b0a000 0 0x1000>; |
| 3079 |
|
| 3080 |
clocks = <&aoss_qmp>; |
| 3081 |
clock-names = "apb_pclk"; |
| 3082 |
qcom,replicator-loses-context; |
| 3083 |
|
| 3084 |
out-ports { |
| 3085 |
port { |
| 3086 |
swao_replicator_out: endpoint { |
| 3087 |
remote-endpoint = <&funnel1_in4>; |
| 3088 |
}; |
| 3089 |
}; |
| 3090 |
}; |
| 3091 |
|
| 3092 |
in-ports { |
| 3093 |
port { |
| 3094 |
swao_replicator_in: endpoint { |
| 3095 |
remote-endpoint = <&swao_etf_out>; |
| 3096 |
}; |
| 3097 |
}; |
| 3098 |
}; |
| 3099 |
}; |
| 3100 |
|
| 3101 |
etm@7040000 { |
| 3102 |
compatible = "arm,coresight-etm4x", "arm,primecell"; |
| 3103 |
reg = <0 0x07040000 0 0x1000>; |
| 3104 |
|
| 3105 |
cpu = <&cpu0>; |
| 3106 |
|
| 3107 |
clocks = <&aoss_qmp>; |
| 3108 |
clock-names = "apb_pclk"; |
| 3109 |
arm,coresight-loses-context-with-cpu; |
| 3110 |
qcom,skip-power-up; |
| 3111 |
|
| 3112 |
out-ports { |
| 3113 |
port { |
| 3114 |
etm0_out: endpoint { |
| 3115 |
remote-endpoint = <&apss_funnel_in0>; |
| 3116 |
}; |
| 3117 |
}; |
| 3118 |
}; |
| 3119 |
}; |
| 3120 |
|
| 3121 |
etm@7140000 { |
| 3122 |
compatible = "arm,coresight-etm4x", "arm,primecell"; |
| 3123 |
reg = <0 0x07140000 0 0x1000>; |
| 3124 |
|
| 3125 |
cpu = <&cpu1>; |
| 3126 |
|
| 3127 |
clocks = <&aoss_qmp>; |
| 3128 |
clock-names = "apb_pclk"; |
| 3129 |
arm,coresight-loses-context-with-cpu; |
| 3130 |
qcom,skip-power-up; |
| 3131 |
|
| 3132 |
out-ports { |
| 3133 |
port { |
| 3134 |
etm1_out: endpoint { |
| 3135 |
remote-endpoint = <&apss_funnel_in1>; |
| 3136 |
}; |
| 3137 |
}; |
| 3138 |
}; |
| 3139 |
}; |
| 3140 |
|
| 3141 |
etm@7240000 { |
| 3142 |
compatible = "arm,coresight-etm4x", "arm,primecell"; |
| 3143 |
reg = <0 0x07240000 0 0x1000>; |
| 3144 |
|
| 3145 |
cpu = <&cpu2>; |
| 3146 |
|
| 3147 |
clocks = <&aoss_qmp>; |
| 3148 |
clock-names = "apb_pclk"; |
| 3149 |
arm,coresight-loses-context-with-cpu; |
| 3150 |
qcom,skip-power-up; |
| 3151 |
|
| 3152 |
out-ports { |
| 3153 |
port { |
| 3154 |
etm2_out: endpoint { |
| 3155 |
remote-endpoint = <&apss_funnel_in2>; |
| 3156 |
}; |
| 3157 |
}; |
| 3158 |
}; |
| 3159 |
}; |
| 3160 |
|
| 3161 |
etm@7340000 { |
| 3162 |
compatible = "arm,coresight-etm4x", "arm,primecell"; |
| 3163 |
reg = <0 0x07340000 0 0x1000>; |
| 3164 |
|
| 3165 |
cpu = <&cpu3>; |
| 3166 |
|
| 3167 |
clocks = <&aoss_qmp>; |
| 3168 |
clock-names = "apb_pclk"; |
| 3169 |
arm,coresight-loses-context-with-cpu; |
| 3170 |
qcom,skip-power-up; |
| 3171 |
|
| 3172 |
out-ports { |
| 3173 |
port { |
| 3174 |
etm3_out: endpoint { |
| 3175 |
remote-endpoint = <&apss_funnel_in3>; |
| 3176 |
}; |
| 3177 |
}; |
| 3178 |
}; |
| 3179 |
}; |
| 3180 |
|
| 3181 |
etm@7440000 { |
| 3182 |
compatible = "arm,coresight-etm4x", "arm,primecell"; |
| 3183 |
reg = <0 0x07440000 0 0x1000>; |
| 3184 |
|
| 3185 |
cpu = <&cpu4>; |
| 3186 |
|
| 3187 |
clocks = <&aoss_qmp>; |
| 3188 |
clock-names = "apb_pclk"; |
| 3189 |
arm,coresight-loses-context-with-cpu; |
| 3190 |
qcom,skip-power-up; |
| 3191 |
|
| 3192 |
out-ports { |
| 3193 |
port { |
| 3194 |
etm4_out: endpoint { |
| 3195 |
remote-endpoint = <&apss_funnel_in4>; |
| 3196 |
}; |
| 3197 |
}; |
| 3198 |
}; |
| 3199 |
}; |
| 3200 |
|
| 3201 |
etm@7540000 { |
| 3202 |
compatible = "arm,coresight-etm4x", "arm,primecell"; |
| 3203 |
reg = <0 0x07540000 0 0x1000>; |
| 3204 |
|
| 3205 |
cpu = <&cpu5>; |
| 3206 |
|
| 3207 |
clocks = <&aoss_qmp>; |
| 3208 |
clock-names = "apb_pclk"; |
| 3209 |
arm,coresight-loses-context-with-cpu; |
| 3210 |
qcom,skip-power-up; |
| 3211 |
|
| 3212 |
out-ports { |
| 3213 |
port { |
| 3214 |
etm5_out: endpoint { |
| 3215 |
remote-endpoint = <&apss_funnel_in5>; |
| 3216 |
}; |
| 3217 |
}; |
| 3218 |
}; |
| 3219 |
}; |
| 3220 |
|
| 3221 |
etm@7640000 { |
| 3222 |
compatible = "arm,coresight-etm4x", "arm,primecell"; |
| 3223 |
reg = <0 0x07640000 0 0x1000>; |
| 3224 |
|
| 3225 |
cpu = <&cpu6>; |
| 3226 |
|
| 3227 |
clocks = <&aoss_qmp>; |
| 3228 |
clock-names = "apb_pclk"; |
| 3229 |
arm,coresight-loses-context-with-cpu; |
| 3230 |
qcom,skip-power-up; |
| 3231 |
|
| 3232 |
out-ports { |
| 3233 |
port { |
| 3234 |
etm6_out: endpoint { |
| 3235 |
remote-endpoint = <&apss_funnel_in6>; |
| 3236 |
}; |
| 3237 |
}; |
| 3238 |
}; |
| 3239 |
}; |
| 3240 |
|
| 3241 |
etm@7740000 { |
| 3242 |
compatible = "arm,coresight-etm4x", "arm,primecell"; |
| 3243 |
reg = <0 0x07740000 0 0x1000>; |
| 3244 |
|
| 3245 |
cpu = <&cpu7>; |
| 3246 |
|
| 3247 |
clocks = <&aoss_qmp>; |
| 3248 |
clock-names = "apb_pclk"; |
| 3249 |
arm,coresight-loses-context-with-cpu; |
| 3250 |
qcom,skip-power-up; |
| 3251 |
|
| 3252 |
out-ports { |
| 3253 |
port { |
| 3254 |
etm7_out: endpoint { |
| 3255 |
remote-endpoint = <&apss_funnel_in7>; |
| 3256 |
}; |
| 3257 |
}; |
| 3258 |
}; |
| 3259 |
}; |
| 3260 |
|
| 3261 |
funnel@7800000 { /* APSS Funnel */ |
| 3262 |
compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; |
| 3263 |
reg = <0 0x07800000 0 0x1000>; |
| 3264 |
|
| 3265 |
clocks = <&aoss_qmp>; |
| 3266 |
clock-names = "apb_pclk"; |
| 3267 |
|
| 3268 |
out-ports { |
| 3269 |
port { |
| 3270 |
apss_funnel_out: endpoint { |
| 3271 |
remote-endpoint = <&apss_merge_funnel_in>; |
| 3272 |
}; |
| 3273 |
}; |
| 3274 |
}; |
| 3275 |
|
| 3276 |
in-ports { |
| 3277 |
#address-cells = <1>; |
| 3278 |
#size-cells = <0>; |
| 3279 |
|
| 3280 |
port@0 { |
| 3281 |
reg = <0>; |
| 3282 |
apss_funnel_in0: endpoint { |
| 3283 |
remote-endpoint = <&etm0_out>; |
| 3284 |
}; |
| 3285 |
}; |
| 3286 |
|
| 3287 |
port@1 { |
| 3288 |
reg = <1>; |
| 3289 |
apss_funnel_in1: endpoint { |
| 3290 |
remote-endpoint = <&etm1_out>; |
| 3291 |
}; |
| 3292 |
}; |
| 3293 |
|
| 3294 |
port@2 { |
| 3295 |
reg = <2>; |
| 3296 |
apss_funnel_in2: endpoint { |
| 3297 |
remote-endpoint = <&etm2_out>; |
| 3298 |
}; |
| 3299 |
}; |
| 3300 |
|
| 3301 |
port@3 { |
| 3302 |
reg = <3>; |
| 3303 |
apss_funnel_in3: endpoint { |
| 3304 |
remote-endpoint = <&etm3_out>; |
| 3305 |
}; |
| 3306 |
}; |
| 3307 |
|
| 3308 |
port@4 { |
| 3309 |
reg = <4>; |
| 3310 |
apss_funnel_in4: endpoint { |
| 3311 |
remote-endpoint = <&etm4_out>; |
| 3312 |
}; |
| 3313 |
}; |
| 3314 |
|
| 3315 |
port@5 { |
| 3316 |
reg = <5>; |
| 3317 |
apss_funnel_in5: endpoint { |
| 3318 |
remote-endpoint = <&etm5_out>; |
| 3319 |
}; |
| 3320 |
}; |
| 3321 |
|
| 3322 |
port@6 { |
| 3323 |
reg = <6>; |
| 3324 |
apss_funnel_in6: endpoint { |
| 3325 |
remote-endpoint = <&etm6_out>; |
| 3326 |
}; |
| 3327 |
}; |
| 3328 |
|
| 3329 |
port@7 { |
| 3330 |
reg = <7>; |
| 3331 |
apss_funnel_in7: endpoint { |
| 3332 |
remote-endpoint = <&etm7_out>; |
| 3333 |
}; |
| 3334 |
}; |
| 3335 |
}; |
| 3336 |
}; |
| 3337 |
|
| 3338 |
funnel@7810000 { |
| 3339 |
compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; |
| 3340 |
reg = <0 0x07810000 0 0x1000>; |
| 3341 |
|
| 3342 |
clocks = <&aoss_qmp>; |
| 3343 |
clock-names = "apb_pclk"; |
| 3344 |
|
| 3345 |
out-ports { |
| 3346 |
port { |
| 3347 |
apss_merge_funnel_out: endpoint { |
| 3348 |
remote-endpoint = <&funnel2_in2>; |
| 3349 |
}; |
| 3350 |
}; |
| 3351 |
}; |
| 3352 |
|
| 3353 |
in-ports { |
| 3354 |
port { |
| 3355 |
apss_merge_funnel_in: endpoint { |
| 3356 |
remote-endpoint = <&apss_funnel_out>; |
| 3357 |
}; |
| 3358 |
}; |
| 3359 |
}; |
| 3360 |
}; |
| 3361 |
|
| 3362 |
remoteproc_cdsp: remoteproc@8300000 { |
| 3363 |
compatible = "qcom,sm8150-cdsp-pas"; |
| 3364 |
reg = <0x0 0x08300000 0x0 0x4040>; |
| 3365 |
|
| 3366 |
interrupts-extended = <&intc GIC_SPI 578 IRQ_TYPE_EDGE_RISING>, |
| 3367 |
<&cdsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, |
| 3368 |
<&cdsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, |
| 3369 |
<&cdsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, |
| 3370 |
<&cdsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>; |
| 3371 |
interrupt-names = "wdog", "fatal", "ready", |
| 3372 |
"handover", "stop-ack"; |
| 3373 |
|
| 3374 |
clocks = <&rpmhcc RPMH_CXO_CLK>; |
| 3375 |
clock-names = "xo"; |
| 3376 |
|
| 3377 |
power-domains = <&rpmhpd SM8150_CX>; |
| 3378 |
|
| 3379 |
memory-region = <&cdsp_mem>; |
| 3380 |
|
| 3381 |
qcom,qmp = <&aoss_qmp>; |
| 3382 |
|
| 3383 |
qcom,smem-states = <&cdsp_smp2p_out 0>; |
| 3384 |
qcom,smem-state-names = "stop"; |
| 3385 |
|
| 3386 |
status = "disabled"; |
| 3387 |
|
| 3388 |
glink-edge { |
| 3389 |
interrupts = <GIC_SPI 574 IRQ_TYPE_EDGE_RISING>; |
| 3390 |
label = "cdsp"; |
| 3391 |
qcom,remote-pid = <5>; |
| 3392 |
mboxes = <&apss_shared 4>; |
| 3393 |
|
| 3394 |
fastrpc { |
| 3395 |
compatible = "qcom,fastrpc"; |
| 3396 |
qcom,glink-channels = "fastrpcglink-apps-dsp"; |
| 3397 |
label = "cdsp"; |
| 3398 |
qcom,non-secure-domain; |
| 3399 |
#address-cells = <1>; |
| 3400 |
#size-cells = <0>; |
| 3401 |
|
| 3402 |
compute-cb@1 { |
| 3403 |
compatible = "qcom,fastrpc-compute-cb"; |
| 3404 |
reg = <1>; |
| 3405 |
iommus = <&apps_smmu 0x1001 0x0460>; |
| 3406 |
}; |
| 3407 |
|
| 3408 |
compute-cb@2 { |
| 3409 |
compatible = "qcom,fastrpc-compute-cb"; |
| 3410 |
reg = <2>; |
| 3411 |
iommus = <&apps_smmu 0x1002 0x0460>; |
| 3412 |
}; |
| 3413 |
|
| 3414 |
compute-cb@3 { |
| 3415 |
compatible = "qcom,fastrpc-compute-cb"; |
| 3416 |
reg = <3>; |
| 3417 |
iommus = <&apps_smmu 0x1003 0x0460>; |
| 3418 |
}; |
| 3419 |
|
| 3420 |
compute-cb@4 { |
| 3421 |
compatible = "qcom,fastrpc-compute-cb"; |
| 3422 |
reg = <4>; |
| 3423 |
iommus = <&apps_smmu 0x1004 0x0460>; |
| 3424 |
}; |
| 3425 |
|
| 3426 |
compute-cb@5 { |
| 3427 |
compatible = "qcom,fastrpc-compute-cb"; |
| 3428 |
reg = <5>; |
| 3429 |
iommus = <&apps_smmu 0x1005 0x0460>; |
| 3430 |
}; |
| 3431 |
|
| 3432 |
compute-cb@6 { |
| 3433 |
compatible = "qcom,fastrpc-compute-cb"; |
| 3434 |
reg = <6>; |
| 3435 |
iommus = <&apps_smmu 0x1006 0x0460>; |
| 3436 |
}; |
| 3437 |
|
| 3438 |
compute-cb@7 { |
| 3439 |
compatible = "qcom,fastrpc-compute-cb"; |
| 3440 |
reg = <7>; |
| 3441 |
iommus = <&apps_smmu 0x1007 0x0460>; |
| 3442 |
}; |
| 3443 |
|
| 3444 |
compute-cb@8 { |
| 3445 |
compatible = "qcom,fastrpc-compute-cb"; |
| 3446 |
reg = <8>; |
| 3447 |
iommus = <&apps_smmu 0x1008 0x0460>; |
| 3448 |
}; |
| 3449 |
|
| 3450 |
/* note: secure cb9 in downstream */ |
| 3451 |
}; |
| 3452 |
}; |
| 3453 |
}; |
| 3454 |
|
| 3455 |
usb_1_hsphy: phy@88e2000 { |
| 3456 |
compatible = "qcom,sm8150-usb-hs-phy", |
| 3457 |
"qcom,usb-snps-hs-7nm-phy"; |
| 3458 |
reg = <0 0x088e2000 0 0x400>; |
| 3459 |
status = "disabled"; |
| 3460 |
#phy-cells = <0>; |
| 3461 |
|
| 3462 |
clocks = <&rpmhcc RPMH_CXO_CLK>; |
| 3463 |
clock-names = "ref"; |
| 3464 |
|
| 3465 |
resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>; |
| 3466 |
}; |
| 3467 |
|
| 3468 |
usb_2_hsphy: phy@88e3000 { |
| 3469 |
compatible = "qcom,sm8150-usb-hs-phy", |
| 3470 |
"qcom,usb-snps-hs-7nm-phy"; |
| 3471 |
reg = <0 0x088e3000 0 0x400>; |
| 3472 |
status = "disabled"; |
| 3473 |
#phy-cells = <0>; |
| 3474 |
|
| 3475 |
clocks = <&rpmhcc RPMH_CXO_CLK>; |
| 3476 |
clock-names = "ref"; |
| 3477 |
|
| 3478 |
resets = <&gcc GCC_QUSB2PHY_SEC_BCR>; |
| 3479 |
}; |
| 3480 |
|
| 3481 |
refgen: regulator@88e7000 { |
| 3482 |
compatible = "qcom,sm8150-refgen-regulator", |
| 3483 |
"qcom,sdm845-refgen-regulator"; |
| 3484 |
reg = <0x0 0x088e7000 0x0 0x60>; |
| 3485 |
}; |
| 3486 |
|
| 3487 |
usb_1_qmpphy: phy@88e8000 { |
| 3488 |
compatible = "qcom,sm8150-qmp-usb3-dp-phy"; |
| 3489 |
reg = <0 0x088e8000 0 0x3000>; |
| 3490 |
|
| 3491 |
clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>, |
| 3492 |
<&gcc GCC_USB3_PRIM_CLKREF_CLK>, |
| 3493 |
<&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>, |
| 3494 |
<&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>; |
| 3495 |
clock-names = "aux", |
| 3496 |
"ref", |
| 3497 |
"com_aux", |
| 3498 |
"usb3_pipe"; |
| 3499 |
|
| 3500 |
resets = <&gcc GCC_USB3_DP_PHY_PRIM_BCR>, |
| 3501 |
<&gcc GCC_USB3_PHY_PRIM_BCR>; |
| 3502 |
reset-names = "phy", "common"; |
| 3503 |
|
| 3504 |
#clock-cells = <1>; |
| 3505 |
#phy-cells = <1>; |
| 3506 |
|
| 3507 |
status = "disabled"; |
| 3508 |
|
| 3509 |
ports { |
| 3510 |
#address-cells = <1>; |
| 3511 |
#size-cells = <0>; |
| 3512 |
|
| 3513 |
port@0 { |
| 3514 |
reg = <0>; |
| 3515 |
|
| 3516 |
usb_1_qmpphy_out: endpoint { |
| 3517 |
}; |
| 3518 |
}; |
| 3519 |
|
| 3520 |
port@1 { |
| 3521 |
reg = <1>; |
| 3522 |
|
| 3523 |
usb_1_qmpphy_usb_ss_in: endpoint { |
| 3524 |
remote-endpoint = <&usb_1_dwc3_ss>; |
| 3525 |
}; |
| 3526 |
}; |
| 3527 |
|
| 3528 |
port@2 { |
| 3529 |
reg = <2>; |
| 3530 |
|
| 3531 |
usb_1_qmpphy_dp_in: endpoint { |
| 3532 |
remote-endpoint = <&mdss_dp_out>; |
| 3533 |
}; |
| 3534 |
}; |
| 3535 |
}; |
| 3536 |
}; |
| 3537 |
|
| 3538 |
usb_2_qmpphy: phy@88eb000 { |
| 3539 |
compatible = "qcom,sm8150-qmp-usb3-uni-phy"; |
| 3540 |
reg = <0 0x088eb000 0 0x1000>; |
| 3541 |
|
| 3542 |
clocks = <&gcc GCC_USB3_SEC_PHY_AUX_CLK>, |
| 3543 |
<&gcc GCC_USB3_SEC_CLKREF_CLK>, |
| 3544 |
<&gcc GCC_USB3_SEC_PHY_COM_AUX_CLK>, |
| 3545 |
<&gcc GCC_USB3_SEC_PHY_PIPE_CLK>; |
| 3546 |
clock-names = "aux", |
| 3547 |
"ref", |
| 3548 |
"com_aux", |
| 3549 |
"pipe"; |
| 3550 |
clock-output-names = "usb3_uni_phy_pipe_clk_src"; |
| 3551 |
#clock-cells = <0>; |
| 3552 |
#phy-cells = <0>; |
| 3553 |
|
| 3554 |
resets = <&gcc GCC_USB3_PHY_SEC_BCR>, |
| 3555 |
<&gcc GCC_USB3PHY_PHY_SEC_BCR>; |
| 3556 |
reset-names = "phy", |
| 3557 |
"phy_phy"; |
| 3558 |
|
| 3559 |
status = "disabled"; |
| 3560 |
}; |
| 3561 |
|
| 3562 |
sdhc_2: mmc@8804000 { |
| 3563 |
compatible = "qcom,sm8150-sdhci", "qcom,sdhci-msm-v5"; |
| 3564 |
reg = <0 0x08804000 0 0x1000>; |
| 3565 |
|
| 3566 |
interrupts = <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>, |
| 3567 |
<GIC_SPI 222 IRQ_TYPE_LEVEL_HIGH>; |
| 3568 |
interrupt-names = "hc_irq", "pwr_irq"; |
| 3569 |
|
| 3570 |
clocks = <&gcc GCC_SDCC2_AHB_CLK>, |
| 3571 |
<&gcc GCC_SDCC2_APPS_CLK>, |
| 3572 |
<&rpmhcc RPMH_CXO_CLK>; |
| 3573 |
clock-names = "iface", "core", "xo"; |
| 3574 |
iommus = <&apps_smmu 0x6a0 0x0>; |
| 3575 |
qcom,dll-config = <0x0007642c>; |
| 3576 |
qcom,ddr-config = <0x80040868>; |
| 3577 |
power-domains = <&rpmhpd 0>; |
| 3578 |
operating-points-v2 = <&sdhc2_opp_table>; |
| 3579 |
|
| 3580 |
status = "disabled"; |
| 3581 |
|
| 3582 |
sdhc2_opp_table: opp-table { |
| 3583 |
compatible = "operating-points-v2"; |
| 3584 |
|
| 3585 |
opp-19200000 { |
| 3586 |
opp-hz = /bits/ 64 <19200000>; |
| 3587 |
required-opps = <&rpmhpd_opp_min_svs>; |
| 3588 |
}; |
| 3589 |
|
| 3590 |
opp-50000000 { |
| 3591 |
opp-hz = /bits/ 64 <50000000>; |
| 3592 |
required-opps = <&rpmhpd_opp_low_svs>; |
| 3593 |
}; |
| 3594 |
|
| 3595 |
opp-100000000 { |
| 3596 |
opp-hz = /bits/ 64 <100000000>; |
| 3597 |
required-opps = <&rpmhpd_opp_svs>; |
| 3598 |
}; |
| 3599 |
|
| 3600 |
opp-202000000 { |
| 3601 |
opp-hz = /bits/ 64 <202000000>; |
| 3602 |
required-opps = <&rpmhpd_opp_svs_l1>; |
| 3603 |
}; |
| 3604 |
}; |
| 3605 |
}; |
| 3606 |
|
| 3607 |
dc_noc: interconnect@9160000 { |
| 3608 |
compatible = "qcom,sm8150-dc-noc"; |
| 3609 |
reg = <0 0x09160000 0 0x3200>; |
| 3610 |
#interconnect-cells = <2>; |
| 3611 |
qcom,bcm-voters = <&apps_bcm_voter>; |
| 3612 |
}; |
| 3613 |
|
| 3614 |
gem_noc: interconnect@9680000 { |
| 3615 |
compatible = "qcom,sm8150-gem-noc"; |
| 3616 |
reg = <0 0x09680000 0 0x3e200>; |
| 3617 |
#interconnect-cells = <2>; |
| 3618 |
qcom,bcm-voters = <&apps_bcm_voter>; |
| 3619 |
}; |
| 3620 |
|
| 3621 |
usb_1: usb@a6f8800 { |
| 3622 |
compatible = "qcom,sm8150-dwc3", "qcom,dwc3"; |
| 3623 |
reg = <0 0x0a6f8800 0 0x400>; |
| 3624 |
status = "disabled"; |
| 3625 |
#address-cells = <2>; |
| 3626 |
#size-cells = <2>; |
| 3627 |
ranges; |
| 3628 |
dma-ranges; |
| 3629 |
|
| 3630 |
clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>, |
| 3631 |
<&gcc GCC_USB30_PRIM_MASTER_CLK>, |
| 3632 |
<&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>, |
| 3633 |
<&gcc GCC_USB30_PRIM_SLEEP_CLK>, |
| 3634 |
<&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>, |
| 3635 |
<&gcc GCC_USB3_SEC_CLKREF_CLK>; |
| 3636 |
clock-names = "cfg_noc", |
| 3637 |
"core", |
| 3638 |
"iface", |
| 3639 |
"sleep", |
| 3640 |
"mock_utmi", |
| 3641 |
"xo"; |
| 3642 |
|
| 3643 |
assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>, |
| 3644 |
<&gcc GCC_USB30_PRIM_MASTER_CLK>; |
| 3645 |
assigned-clock-rates = <19200000>, <200000000>; |
| 3646 |
|
| 3647 |
interrupts-extended = <&intc GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>, |
| 3648 |
<&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>, |
| 3649 |
<&pdc 9 IRQ_TYPE_EDGE_BOTH>, |
| 3650 |
<&pdc 8 IRQ_TYPE_EDGE_BOTH>, |
| 3651 |
<&pdc 6 IRQ_TYPE_LEVEL_HIGH>; |
| 3652 |
interrupt-names = "pwr_event", |
| 3653 |
"hs_phy_irq", |
| 3654 |
"dp_hs_phy_irq", |
| 3655 |
"dm_hs_phy_irq", |
| 3656 |
"ss_phy_irq"; |
| 3657 |
|
| 3658 |
power-domains = <&gcc USB30_PRIM_GDSC>; |
| 3659 |
|
| 3660 |
resets = <&gcc GCC_USB30_PRIM_BCR>; |
| 3661 |
|
| 3662 |
interconnects = <&aggre1_noc MASTER_USB3 0 &mc_virt SLAVE_EBI_CH0 0>, |
| 3663 |
<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_USB3 0>; |
| 3664 |
interconnect-names = "usb-ddr", "apps-usb"; |
| 3665 |
|
| 3666 |
usb_1_dwc3: usb@a600000 { |
| 3667 |
compatible = "snps,dwc3"; |
| 3668 |
reg = <0 0x0a600000 0 0xcd00>; |
| 3669 |
interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>; |
| 3670 |
iommus = <&apps_smmu 0x140 0>; |
| 3671 |
snps,dis_u2_susphy_quirk; |
| 3672 |
snps,dis_u3_susphy_quirk; |
| 3673 |
snps,dis_enblslpm_quirk; |
| 3674 |
snps,dis-u1-entry-quirk; |
| 3675 |
snps,dis-u2-entry-quirk; |
| 3676 |
phys = <&usb_1_hsphy>, <&usb_1_qmpphy QMP_USB43DP_USB3_PHY>; |
| 3677 |
phy-names = "usb2-phy", "usb3-phy"; |
| 3678 |
|
| 3679 |
ports { |
| 3680 |
#address-cells = <1>; |
| 3681 |
#size-cells = <0>; |
| 3682 |
|
| 3683 |
port@0 { |
| 3684 |
reg = <0>; |
| 3685 |
|
| 3686 |
usb_1_dwc3_hs: endpoint { |
| 3687 |
}; |
| 3688 |
}; |
| 3689 |
|
| 3690 |
port@1 { |
| 3691 |
reg = <1>; |
| 3692 |
|
| 3693 |
usb_1_dwc3_ss: endpoint { |
| 3694 |
remote-endpoint = <&usb_1_qmpphy_usb_ss_in>; |
| 3695 |
}; |
| 3696 |
}; |
| 3697 |
}; |
| 3698 |
}; |
| 3699 |
}; |
| 3700 |
|
| 3701 |
usb_2: usb@a8f8800 { |
| 3702 |
compatible = "qcom,sm8150-dwc3", "qcom,dwc3"; |
| 3703 |
reg = <0 0x0a8f8800 0 0x400>; |
| 3704 |
status = "disabled"; |
| 3705 |
#address-cells = <2>; |
| 3706 |
#size-cells = <2>; |
| 3707 |
ranges; |
| 3708 |
dma-ranges; |
| 3709 |
|
| 3710 |
clocks = <&gcc GCC_CFG_NOC_USB3_SEC_AXI_CLK>, |
| 3711 |
<&gcc GCC_USB30_SEC_MASTER_CLK>, |
| 3712 |
<&gcc GCC_AGGRE_USB3_SEC_AXI_CLK>, |
| 3713 |
<&gcc GCC_USB30_SEC_SLEEP_CLK>, |
| 3714 |
<&gcc GCC_USB30_SEC_MOCK_UTMI_CLK>, |
| 3715 |
<&gcc GCC_USB3_SEC_CLKREF_CLK>; |
| 3716 |
clock-names = "cfg_noc", |
| 3717 |
"core", |
| 3718 |
"iface", |
| 3719 |
"sleep", |
| 3720 |
"mock_utmi", |
| 3721 |
"xo"; |
| 3722 |
|
| 3723 |
assigned-clocks = <&gcc GCC_USB30_SEC_MOCK_UTMI_CLK>, |
| 3724 |
<&gcc GCC_USB30_SEC_MASTER_CLK>; |
| 3725 |
assigned-clock-rates = <19200000>, <200000000>; |
| 3726 |
|
| 3727 |
interrupts-extended = <&intc GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>, |
| 3728 |
<&intc GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>, |
| 3729 |
<&pdc 11 IRQ_TYPE_EDGE_BOTH>, |
| 3730 |
<&pdc 10 IRQ_TYPE_EDGE_BOTH>, |
| 3731 |
<&pdc 7 IRQ_TYPE_LEVEL_HIGH>; |
| 3732 |
interrupt-names = "pwr_event", |
| 3733 |
"hs_phy_irq", |
| 3734 |
"dp_hs_phy_irq", |
| 3735 |
"dm_hs_phy_irq", |
| 3736 |
"ss_phy_irq"; |
| 3737 |
|
| 3738 |
power-domains = <&gcc USB30_SEC_GDSC>; |
| 3739 |
|
| 3740 |
resets = <&gcc GCC_USB30_SEC_BCR>; |
| 3741 |
|
| 3742 |
interconnects = <&aggre1_noc MASTER_USB3_1 0 &mc_virt SLAVE_EBI_CH0 0>, |
| 3743 |
<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_USB3_1 0>; |
| 3744 |
interconnect-names = "usb-ddr", "apps-usb"; |
| 3745 |
|
| 3746 |
usb_2_dwc3: usb@a800000 { |
| 3747 |
compatible = "snps,dwc3"; |
| 3748 |
reg = <0 0x0a800000 0 0xcd00>; |
| 3749 |
interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>; |
| 3750 |
iommus = <&apps_smmu 0x160 0>; |
| 3751 |
snps,dis_u2_susphy_quirk; |
| 3752 |
snps,dis_u3_susphy_quirk; |
| 3753 |
snps,dis_enblslpm_quirk; |
| 3754 |
snps,dis-u1-entry-quirk; |
| 3755 |
snps,dis-u2-entry-quirk; |
| 3756 |
phys = <&usb_2_hsphy>, <&usb_2_qmpphy>; |
| 3757 |
phy-names = "usb2-phy", "usb3-phy"; |
| 3758 |
}; |
| 3759 |
}; |
| 3760 |
|
| 3761 |
videocc: clock-controller@ab00000 { |
| 3762 |
compatible = "qcom,sm8150-videocc"; |
| 3763 |
reg = <0 0x0ab00000 0 0x10000>; |
| 3764 |
clocks = <&gcc GCC_VIDEO_AHB_CLK>, |
| 3765 |
<&rpmhcc RPMH_CXO_CLK>; |
| 3766 |
clock-names = "iface", "bi_tcxo"; |
| 3767 |
power-domains = <&rpmhpd SM8150_MMCX>; |
| 3768 |
required-opps = <&rpmhpd_opp_low_svs>; |
| 3769 |
#clock-cells = <1>; |
| 3770 |
#reset-cells = <1>; |
| 3771 |
#power-domain-cells = <1>; |
| 3772 |
}; |
| 3773 |
|
| 3774 |
camnoc_virt: interconnect@ac00000 { |
| 3775 |
compatible = "qcom,sm8150-camnoc-virt"; |
| 3776 |
reg = <0 0x0ac00000 0 0x1000>; |
| 3777 |
#interconnect-cells = <2>; |
| 3778 |
qcom,bcm-voters = <&apps_bcm_voter>; |
| 3779 |
}; |
| 3780 |
|
| 3781 |
camcc: clock-controller@ad00000 { |
| 3782 |
compatible = "qcom,sm8150-camcc"; |
| 3783 |
reg = <0 0x0ad00000 0 0x10000>; |
| 3784 |
clocks = <&rpmhcc RPMH_CXO_CLK>, |
| 3785 |
<&gcc GCC_CAMERA_AHB_CLK>; |
| 3786 |
power-domains = <&rpmhpd SM8150_MMCX>; |
| 3787 |
required-opps = <&rpmhpd_opp_low_svs>; |
| 3788 |
#clock-cells = <1>; |
| 3789 |
#reset-cells = <1>; |
| 3790 |
#power-domain-cells = <1>; |
| 3791 |
}; |
| 3792 |
|
| 3793 |
mdss: display-subsystem@ae00000 { |
| 3794 |
compatible = "qcom,sm8150-mdss"; |
| 3795 |
reg = <0 0x0ae00000 0 0x1000>; |
| 3796 |
reg-names = "mdss"; |
| 3797 |
|
| 3798 |
interconnects = <&mmss_noc MASTER_MDP_PORT0 0 &mc_virt SLAVE_EBI_CH0 0>, |
| 3799 |
<&mmss_noc MASTER_MDP_PORT1 0 &mc_virt SLAVE_EBI_CH0 0>; |
| 3800 |
interconnect-names = "mdp0-mem", "mdp1-mem"; |
| 3801 |
|
| 3802 |
power-domains = <&dispcc MDSS_GDSC>; |
| 3803 |
|
| 3804 |
clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, |
| 3805 |
<&gcc GCC_DISP_HF_AXI_CLK>, |
| 3806 |
<&gcc GCC_DISP_SF_AXI_CLK>, |
| 3807 |
<&dispcc DISP_CC_MDSS_MDP_CLK>; |
| 3808 |
clock-names = "iface", "bus", "nrt_bus", "core"; |
| 3809 |
|
| 3810 |
interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; |
| 3811 |
interrupt-controller; |
| 3812 |
#interrupt-cells = <1>; |
| 3813 |
|
| 3814 |
iommus = <&apps_smmu 0x800 0x420>; |
| 3815 |
|
| 3816 |
status = "disabled"; |
| 3817 |
|
| 3818 |
#address-cells = <2>; |
| 3819 |
#size-cells = <2>; |
| 3820 |
ranges; |
| 3821 |
|
| 3822 |
mdss_mdp: display-controller@ae01000 { |
| 3823 |
compatible = "qcom,sm8150-dpu"; |
| 3824 |
reg = <0 0x0ae01000 0 0x8f000>, |
| 3825 |
<0 0x0aeb0000 0 0x3000>; |
| 3826 |
reg-names = "mdp", "vbif"; |
| 3827 |
|
| 3828 |
clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, |
| 3829 |
<&gcc GCC_DISP_HF_AXI_CLK>, |
| 3830 |
<&dispcc DISP_CC_MDSS_MDP_CLK>, |
| 3831 |
<&dispcc DISP_CC_MDSS_VSYNC_CLK>; |
| 3832 |
clock-names = "iface", "bus", "core", "vsync"; |
| 3833 |
|
| 3834 |
assigned-clocks = <&dispcc DISP_CC_MDSS_VSYNC_CLK>; |
| 3835 |
assigned-clock-rates = <19200000>; |
| 3836 |
|
| 3837 |
operating-points-v2 = <&mdp_opp_table>; |
| 3838 |
power-domains = <&rpmhpd SM8150_MMCX>; |
| 3839 |
|
| 3840 |
interrupt-parent = <&mdss>; |
| 3841 |
interrupts = <0>; |
| 3842 |
|
| 3843 |
ports { |
| 3844 |
#address-cells = <1>; |
| 3845 |
#size-cells = <0>; |
| 3846 |
|
| 3847 |
port@0 { |
| 3848 |
reg = <0>; |
| 3849 |
dpu_intf1_out: endpoint { |
| 3850 |
remote-endpoint = <&mdss_dsi0_in>; |
| 3851 |
}; |
| 3852 |
}; |
| 3853 |
|
| 3854 |
port@1 { |
| 3855 |
reg = <1>; |
| 3856 |
dpu_intf2_out: endpoint { |
| 3857 |
remote-endpoint = <&mdss_dsi1_in>; |
| 3858 |
}; |
| 3859 |
}; |
| 3860 |
|
| 3861 |
port@2 { |
| 3862 |
reg = <2>; |
| 3863 |
dpu_intf0_out: endpoint { |
| 3864 |
remote-endpoint = <&mdss_dp_in>; |
| 3865 |
}; |
| 3866 |
}; |
| 3867 |
}; |
| 3868 |
|
| 3869 |
mdp_opp_table: opp-table { |
| 3870 |
compatible = "operating-points-v2"; |
| 3871 |
|
| 3872 |
opp-171428571 { |
| 3873 |
opp-hz = /bits/ 64 <171428571>; |
| 3874 |
required-opps = <&rpmhpd_opp_low_svs>; |
| 3875 |
}; |
| 3876 |
|
| 3877 |
opp-300000000 { |
| 3878 |
opp-hz = /bits/ 64 <300000000>; |
| 3879 |
required-opps = <&rpmhpd_opp_svs>; |
| 3880 |
}; |
| 3881 |
|
| 3882 |
opp-345000000 { |
| 3883 |
opp-hz = /bits/ 64 <345000000>; |
| 3884 |
required-opps = <&rpmhpd_opp_svs_l1>; |
| 3885 |
}; |
| 3886 |
|
| 3887 |
opp-460000000 { |
| 3888 |
opp-hz = /bits/ 64 <460000000>; |
| 3889 |
required-opps = <&rpmhpd_opp_nom>; |
| 3890 |
}; |
| 3891 |
}; |
| 3892 |
}; |
| 3893 |
|
| 3894 |
mdss_dp: displayport-controller@ae90000 { |
| 3895 |
compatible = "qcom,sm8150-dp", "qcom,sm8350-dp"; |
| 3896 |
reg = <0 0xae90000 0 0x200>, |
| 3897 |
<0 0xae90200 0 0x200>, |
| 3898 |
<0 0xae90400 0 0x600>, |
| 3899 |
<0 0x0ae90a00 0 0x600>, |
| 3900 |
<0 0x0ae91000 0 0x600>; |
| 3901 |
|
| 3902 |
interrupt-parent = <&mdss>; |
| 3903 |
interrupts = <12>; |
| 3904 |
clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, |
| 3905 |
<&dispcc DISP_CC_MDSS_DP_AUX_CLK>, |
| 3906 |
<&dispcc DISP_CC_MDSS_DP_LINK_CLK>, |
| 3907 |
<&dispcc DISP_CC_MDSS_DP_LINK_INTF_CLK>, |
| 3908 |
<&dispcc DISP_CC_MDSS_DP_PIXEL_CLK>, |
| 3909 |
<&dispcc DISP_CC_MDSS_DP_PIXEL1_CLK>; |
| 3910 |
clock-names = "core_iface", |
| 3911 |
"core_aux", |
| 3912 |
"ctrl_link", |
| 3913 |
"ctrl_link_iface", |
| 3914 |
"stream_pixel", |
| 3915 |
"stream_1_pixel"; |
| 3916 |
|
| 3917 |
assigned-clocks = <&dispcc DISP_CC_MDSS_DP_LINK_CLK_SRC>, |
| 3918 |
<&dispcc DISP_CC_MDSS_DP_PIXEL_CLK_SRC>, |
| 3919 |
<&dispcc DISP_CC_MDSS_DP_PIXEL1_CLK_SRC>; |
| 3920 |
assigned-clock-parents = <&usb_1_qmpphy QMP_USB43DP_DP_LINK_CLK>, |
| 3921 |
<&usb_1_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>, |
| 3922 |
<&usb_1_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>; |
| 3923 |
|
| 3924 |
phys = <&usb_1_qmpphy QMP_USB43DP_DP_PHY>; |
| 3925 |
phy-names = "dp"; |
| 3926 |
|
| 3927 |
#sound-dai-cells = <0>; |
| 3928 |
|
| 3929 |
operating-points-v2 = <&dp_opp_table>; |
| 3930 |
power-domains = <&rpmhpd SM8150_MMCX>; |
| 3931 |
|
| 3932 |
status = "disabled"; |
| 3933 |
|
| 3934 |
ports { |
| 3935 |
#address-cells = <1>; |
| 3936 |
#size-cells = <0>; |
| 3937 |
|
| 3938 |
port@0 { |
| 3939 |
reg = <0>; |
| 3940 |
mdss_dp_in: endpoint { |
| 3941 |
remote-endpoint = <&dpu_intf0_out>; |
| 3942 |
}; |
| 3943 |
}; |
| 3944 |
|
| 3945 |
port@1 { |
| 3946 |
reg = <1>; |
| 3947 |
|
| 3948 |
mdss_dp_out: endpoint { |
| 3949 |
remote-endpoint = <&usb_1_qmpphy_dp_in>; |
| 3950 |
}; |
| 3951 |
}; |
| 3952 |
}; |
| 3953 |
|
| 3954 |
dp_opp_table: opp-table { |
| 3955 |
compatible = "operating-points-v2"; |
| 3956 |
|
| 3957 |
opp-160000000 { |
| 3958 |
opp-hz = /bits/ 64 <160000000>; |
| 3959 |
required-opps = <&rpmhpd_opp_low_svs>; |
| 3960 |
}; |
| 3961 |
|
| 3962 |
opp-270000000 { |
| 3963 |
opp-hz = /bits/ 64 <270000000>; |
| 3964 |
required-opps = <&rpmhpd_opp_svs>; |
| 3965 |
}; |
| 3966 |
|
| 3967 |
opp-540000000 { |
| 3968 |
opp-hz = /bits/ 64 <540000000>; |
| 3969 |
required-opps = <&rpmhpd_opp_svs_l1>; |
| 3970 |
}; |
| 3971 |
|
| 3972 |
opp-810000000 { |
| 3973 |
opp-hz = /bits/ 64 <810000000>; |
| 3974 |
required-opps = <&rpmhpd_opp_nom>; |
| 3975 |
}; |
| 3976 |
}; |
| 3977 |
}; |
| 3978 |
|
| 3979 |
mdss_dsi0: dsi@ae94000 { |
| 3980 |
compatible = "qcom,sm8150-dsi-ctrl", "qcom,mdss-dsi-ctrl"; |
| 3981 |
reg = <0 0x0ae94000 0 0x400>; |
| 3982 |
reg-names = "dsi_ctrl"; |
| 3983 |
|
| 3984 |
interrupt-parent = <&mdss>; |
| 3985 |
interrupts = <4>; |
| 3986 |
|
| 3987 |
clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>, |
| 3988 |
<&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>, |
| 3989 |
<&dispcc DISP_CC_MDSS_PCLK0_CLK>, |
| 3990 |
<&dispcc DISP_CC_MDSS_ESC0_CLK>, |
| 3991 |
<&dispcc DISP_CC_MDSS_AHB_CLK>, |
| 3992 |
<&gcc GCC_DISP_HF_AXI_CLK>; |
| 3993 |
clock-names = "byte", |
| 3994 |
"byte_intf", |
| 3995 |
"pixel", |
| 3996 |
"core", |
| 3997 |
"iface", |
| 3998 |
"bus"; |
| 3999 |
|
| 4000 |
assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>, |
| 4001 |
<&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>; |
| 4002 |
assigned-clock-parents = <&mdss_dsi0_phy DSI_BYTE_PLL_CLK>, |
| 4003 |
<&mdss_dsi0_phy DSI_PIXEL_PLL_CLK>; |
| 4004 |
|
| 4005 |
operating-points-v2 = <&dsi_opp_table>; |
| 4006 |
power-domains = <&rpmhpd SM8150_MMCX>; |
| 4007 |
|
| 4008 |
phys = <&mdss_dsi0_phy>; |
| 4009 |
|
| 4010 |
refgen-supply = <&refgen>; |
| 4011 |
|
| 4012 |
status = "disabled"; |
| 4013 |
|
| 4014 |
#address-cells = <1>; |
| 4015 |
#size-cells = <0>; |
| 4016 |
|
| 4017 |
ports { |
| 4018 |
#address-cells = <1>; |
| 4019 |
#size-cells = <0>; |
| 4020 |
|
| 4021 |
port@0 { |
| 4022 |
reg = <0>; |
| 4023 |
mdss_dsi0_in: endpoint { |
| 4024 |
remote-endpoint = <&dpu_intf1_out>; |
| 4025 |
}; |
| 4026 |
}; |
| 4027 |
|
| 4028 |
port@1 { |
| 4029 |
reg = <1>; |
| 4030 |
mdss_dsi0_out: endpoint { |
| 4031 |
}; |
| 4032 |
}; |
| 4033 |
}; |
| 4034 |
|
| 4035 |
dsi_opp_table: opp-table { |
| 4036 |
compatible = "operating-points-v2"; |
| 4037 |
|
| 4038 |
opp-187500000 { |
| 4039 |
opp-hz = /bits/ 64 <187500000>; |
| 4040 |
required-opps = <&rpmhpd_opp_low_svs>; |
| 4041 |
}; |
| 4042 |
|
| 4043 |
opp-300000000 { |
| 4044 |
opp-hz = /bits/ 64 <300000000>; |
| 4045 |
required-opps = <&rpmhpd_opp_svs>; |
| 4046 |
}; |
| 4047 |
|
| 4048 |
opp-358000000 { |
| 4049 |
opp-hz = /bits/ 64 <358000000>; |
| 4050 |
required-opps = <&rpmhpd_opp_svs_l1>; |
| 4051 |
}; |
| 4052 |
}; |
| 4053 |
}; |
| 4054 |
|
| 4055 |
mdss_dsi0_phy: phy@ae94400 { |
| 4056 |
compatible = "qcom,dsi-phy-7nm-8150"; |
| 4057 |
reg = <0 0x0ae94400 0 0x200>, |
| 4058 |
<0 0x0ae94600 0 0x280>, |
| 4059 |
<0 0x0ae94900 0 0x260>; |
| 4060 |
reg-names = "dsi_phy", |
| 4061 |
"dsi_phy_lane", |
| 4062 |
"dsi_pll"; |
| 4063 |
|
| 4064 |
#clock-cells = <1>; |
| 4065 |
#phy-cells = <0>; |
| 4066 |
|
| 4067 |
clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, |
| 4068 |
<&rpmhcc RPMH_CXO_CLK>; |
| 4069 |
clock-names = "iface", "ref"; |
| 4070 |
|
| 4071 |
status = "disabled"; |
| 4072 |
}; |
| 4073 |
|
| 4074 |
mdss_dsi1: dsi@ae96000 { |
| 4075 |
compatible = "qcom,sm8150-dsi-ctrl", "qcom,mdss-dsi-ctrl"; |
| 4076 |
reg = <0 0x0ae96000 0 0x400>; |
| 4077 |
reg-names = "dsi_ctrl"; |
| 4078 |
|
| 4079 |
interrupt-parent = <&mdss>; |
| 4080 |
interrupts = <5>; |
| 4081 |
|
| 4082 |
clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK>, |
| 4083 |
<&dispcc DISP_CC_MDSS_BYTE1_INTF_CLK>, |
| 4084 |
<&dispcc DISP_CC_MDSS_PCLK1_CLK>, |
| 4085 |
<&dispcc DISP_CC_MDSS_ESC1_CLK>, |
| 4086 |
<&dispcc DISP_CC_MDSS_AHB_CLK>, |
| 4087 |
<&gcc GCC_DISP_HF_AXI_CLK>; |
| 4088 |
clock-names = "byte", |
| 4089 |
"byte_intf", |
| 4090 |
"pixel", |
| 4091 |
"core", |
| 4092 |
"iface", |
| 4093 |
"bus"; |
| 4094 |
|
| 4095 |
assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK_SRC>, |
| 4096 |
<&dispcc DISP_CC_MDSS_PCLK1_CLK_SRC>; |
| 4097 |
assigned-clock-parents = <&mdss_dsi1_phy DSI_BYTE_PLL_CLK>, |
| 4098 |
<&mdss_dsi1_phy DSI_PIXEL_PLL_CLK>; |
| 4099 |
|
| 4100 |
operating-points-v2 = <&dsi_opp_table>; |
| 4101 |
power-domains = <&rpmhpd SM8150_MMCX>; |
| 4102 |
|
| 4103 |
phys = <&mdss_dsi1_phy>; |
| 4104 |
|
| 4105 |
refgen-supply = <&refgen>; |
| 4106 |
|
| 4107 |
status = "disabled"; |
| 4108 |
|
| 4109 |
#address-cells = <1>; |
| 4110 |
#size-cells = <0>; |
| 4111 |
|
| 4112 |
ports { |
| 4113 |
#address-cells = <1>; |
| 4114 |
#size-cells = <0>; |
| 4115 |
|
| 4116 |
port@0 { |
| 4117 |
reg = <0>; |
| 4118 |
mdss_dsi1_in: endpoint { |
| 4119 |
remote-endpoint = <&dpu_intf2_out>; |
| 4120 |
}; |
| 4121 |
}; |
| 4122 |
|
| 4123 |
port@1 { |
| 4124 |
reg = <1>; |
| 4125 |
mdss_dsi1_out: endpoint { |
| 4126 |
}; |
| 4127 |
}; |
| 4128 |
}; |
| 4129 |
}; |
| 4130 |
|
| 4131 |
mdss_dsi1_phy: phy@ae96400 { |
| 4132 |
compatible = "qcom,dsi-phy-7nm-8150"; |
| 4133 |
reg = <0 0x0ae96400 0 0x200>, |
| 4134 |
<0 0x0ae96600 0 0x280>, |
| 4135 |
<0 0x0ae96900 0 0x260>; |
| 4136 |
reg-names = "dsi_phy", |
| 4137 |
"dsi_phy_lane", |
| 4138 |
"dsi_pll"; |
| 4139 |
|
| 4140 |
#clock-cells = <1>; |
| 4141 |
#phy-cells = <0>; |
| 4142 |
|
| 4143 |
clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, |
| 4144 |
<&rpmhcc RPMH_CXO_CLK>; |
| 4145 |
clock-names = "iface", "ref"; |
| 4146 |
|
| 4147 |
status = "disabled"; |
| 4148 |
}; |
| 4149 |
}; |
| 4150 |
|
| 4151 |
dispcc: clock-controller@af00000 { |
| 4152 |
compatible = "qcom,sm8150-dispcc"; |
| 4153 |
reg = <0 0x0af00000 0 0x10000>; |
| 4154 |
clocks = <&rpmhcc RPMH_CXO_CLK>, |
| 4155 |
<&mdss_dsi0_phy DSI_BYTE_PLL_CLK>, |
| 4156 |
<&mdss_dsi0_phy DSI_PIXEL_PLL_CLK>, |
| 4157 |
<&mdss_dsi1_phy DSI_BYTE_PLL_CLK>, |
| 4158 |
<&mdss_dsi1_phy DSI_PIXEL_PLL_CLK>, |
| 4159 |
<&usb_1_qmpphy QMP_USB43DP_DP_LINK_CLK>, |
| 4160 |
<&usb_1_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>; |
| 4161 |
clock-names = "bi_tcxo", |
| 4162 |
"dsi0_phy_pll_out_byteclk", |
| 4163 |
"dsi0_phy_pll_out_dsiclk", |
| 4164 |
"dsi1_phy_pll_out_byteclk", |
| 4165 |
"dsi1_phy_pll_out_dsiclk", |
| 4166 |
"dp_phy_pll_link_clk", |
| 4167 |
"dp_phy_pll_vco_div_clk"; |
| 4168 |
power-domains = <&rpmhpd SM8150_MMCX>; |
| 4169 |
required-opps = <&rpmhpd_opp_low_svs>; |
| 4170 |
#clock-cells = <1>; |
| 4171 |
#reset-cells = <1>; |
| 4172 |
#power-domain-cells = <1>; |
| 4173 |
}; |
| 4174 |
|
| 4175 |
pdc: interrupt-controller@b220000 { |
| 4176 |
compatible = "qcom,sm8150-pdc", "qcom,pdc"; |
| 4177 |
reg = <0 0x0b220000 0 0x30000>; |
| 4178 |
qcom,pdc-ranges = <0 480 94>, <94 609 31>, |
| 4179 |
<125 63 1>; |
| 4180 |
#interrupt-cells = <2>; |
| 4181 |
interrupt-parent = <&intc>; |
| 4182 |
interrupt-controller; |
| 4183 |
}; |
| 4184 |
|
| 4185 |
aoss_qmp: power-management@c300000 { |
| 4186 |
compatible = "qcom,sm8150-aoss-qmp", "qcom,aoss-qmp"; |
| 4187 |
reg = <0x0 0x0c300000 0x0 0x400>; |
| 4188 |
interrupts = <GIC_SPI 389 IRQ_TYPE_EDGE_RISING>; |
| 4189 |
mboxes = <&apss_shared 0>; |
| 4190 |
|
| 4191 |
#clock-cells = <0>; |
| 4192 |
}; |
| 4193 |
|
| 4194 |
sram@c3f0000 { |
| 4195 |
compatible = "qcom,rpmh-stats"; |
| 4196 |
reg = <0 0x0c3f0000 0 0x400>; |
| 4197 |
}; |
| 4198 |
|
| 4199 |
tsens0: thermal-sensor@c263000 { |
| 4200 |
compatible = "qcom,sm8150-tsens", "qcom,tsens-v2"; |
| 4201 |
reg = <0 0x0c263000 0 0x1ff>, /* TM */ |
| 4202 |
<0 0x0c222000 0 0x1ff>; /* SROT */ |
| 4203 |
#qcom,sensors = <16>; |
| 4204 |
interrupts = <GIC_SPI 506 IRQ_TYPE_LEVEL_HIGH>, |
| 4205 |
<GIC_SPI 508 IRQ_TYPE_LEVEL_HIGH>; |
| 4206 |
interrupt-names = "uplow", "critical"; |
| 4207 |
#thermal-sensor-cells = <1>; |
| 4208 |
}; |
| 4209 |
|
| 4210 |
tsens1: thermal-sensor@c265000 { |
| 4211 |
compatible = "qcom,sm8150-tsens", "qcom,tsens-v2"; |
| 4212 |
reg = <0 0x0c265000 0 0x1ff>, /* TM */ |
| 4213 |
<0 0x0c223000 0 0x1ff>; /* SROT */ |
| 4214 |
#qcom,sensors = <8>; |
| 4215 |
interrupts = <GIC_SPI 507 IRQ_TYPE_LEVEL_HIGH>, |
| 4216 |
<GIC_SPI 509 IRQ_TYPE_LEVEL_HIGH>; |
| 4217 |
interrupt-names = "uplow", "critical"; |
| 4218 |
#thermal-sensor-cells = <1>; |
| 4219 |
}; |
| 4220 |
|
| 4221 |
spmi_bus: spmi@c440000 { |
| 4222 |
compatible = "qcom,spmi-pmic-arb"; |
| 4223 |
reg = <0x0 0x0c440000 0x0 0x0001100>, |
| 4224 |
<0x0 0x0c600000 0x0 0x2000000>, |
| 4225 |
<0x0 0x0e600000 0x0 0x0100000>, |
| 4226 |
<0x0 0x0e700000 0x0 0x00a0000>, |
| 4227 |
<0x0 0x0c40a000 0x0 0x0026000>; |
| 4228 |
reg-names = "core", "chnls", "obsrvr", "intr", "cnfg"; |
| 4229 |
interrupt-names = "periph_irq"; |
| 4230 |
interrupts = <GIC_SPI 481 IRQ_TYPE_LEVEL_HIGH>; |
| 4231 |
qcom,ee = <0>; |
| 4232 |
qcom,channel = <0>; |
| 4233 |
#address-cells = <2>; |
| 4234 |
#size-cells = <0>; |
| 4235 |
interrupt-controller; |
| 4236 |
#interrupt-cells = <4>; |
| 4237 |
}; |
| 4238 |
|
| 4239 |
apps_smmu: iommu@15000000 { |
| 4240 |
compatible = "qcom,sm8150-smmu-500", "qcom,smmu-500", "arm,mmu-500"; |
| 4241 |
reg = <0 0x15000000 0 0x100000>; |
| 4242 |
#iommu-cells = <2>; |
| 4243 |
#global-interrupts = <1>; |
| 4244 |
interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>, |
| 4245 |
<GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>, |
| 4246 |
<GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>, |
| 4247 |
<GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>, |
| 4248 |
<GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>, |
| 4249 |
<GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>, |
| 4250 |
<GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>, |
| 4251 |
<GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>, |
| 4252 |
<GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>, |
| 4253 |
<GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>, |
| 4254 |
<GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>, |
| 4255 |
<GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>, |
| 4256 |
<GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>, |
| 4257 |
<GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>, |
| 4258 |
<GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>, |
| 4259 |
<GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>, |
| 4260 |
<GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>, |
| 4261 |
<GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>, |
| 4262 |
<GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>, |
| 4263 |
<GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>, |
| 4264 |
<GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>, |
| 4265 |
<GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>, |
| 4266 |
<GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>, |
| 4267 |
<GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>, |
| 4268 |
<GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>, |
| 4269 |
<GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>, |
| 4270 |
<GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>, |
| 4271 |
<GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>, |
| 4272 |
<GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>, |
| 4273 |
<GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>, |
| 4274 |
<GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>, |
| 4275 |
<GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>, |
| 4276 |
<GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>, |
| 4277 |
<GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>, |
| 4278 |
<GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>, |
| 4279 |
<GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>, |
| 4280 |
<GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>, |
| 4281 |
<GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>, |
| 4282 |
<GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>, |
| 4283 |
<GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>, |
| 4284 |
<GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>, |
| 4285 |
<GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>, |
| 4286 |
<GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>, |
| 4287 |
<GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>, |
| 4288 |
<GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>, |
| 4289 |
<GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>, |
| 4290 |
<GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>, |
| 4291 |
<GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>, |
| 4292 |
<GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>, |
| 4293 |
<GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>, |
| 4294 |
<GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>, |
| 4295 |
<GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>, |
| 4296 |
<GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>, |
| 4297 |
<GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>, |
| 4298 |
<GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>, |
| 4299 |
<GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>, |
| 4300 |
<GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>, |
| 4301 |
<GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>, |
| 4302 |
<GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>, |
| 4303 |
<GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>, |
| 4304 |
<GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>, |
| 4305 |
<GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>, |
| 4306 |
<GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>, |
| 4307 |
<GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>, |
| 4308 |
<GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>, |
| 4309 |
<GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>, |
| 4310 |
<GIC_SPI 395 IRQ_TYPE_LEVEL_HIGH>, |
| 4311 |
<GIC_SPI 396 IRQ_TYPE_LEVEL_HIGH>, |
| 4312 |
<GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>, |
| 4313 |
<GIC_SPI 398 IRQ_TYPE_LEVEL_HIGH>, |
| 4314 |
<GIC_SPI 399 IRQ_TYPE_LEVEL_HIGH>, |
| 4315 |
<GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH>, |
| 4316 |
<GIC_SPI 401 IRQ_TYPE_LEVEL_HIGH>, |
| 4317 |
<GIC_SPI 402 IRQ_TYPE_LEVEL_HIGH>, |
| 4318 |
<GIC_SPI 403 IRQ_TYPE_LEVEL_HIGH>, |
| 4319 |
<GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>, |
| 4320 |
<GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>, |
| 4321 |
<GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>, |
| 4322 |
<GIC_SPI 407 IRQ_TYPE_LEVEL_HIGH>, |
| 4323 |
<GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>, |
| 4324 |
<GIC_SPI 409 IRQ_TYPE_LEVEL_HIGH>; |
| 4325 |
dma-coherent; |
| 4326 |
}; |
| 4327 |
|
| 4328 |
remoteproc_adsp: remoteproc@17300000 { |
| 4329 |
compatible = "qcom,sm8150-adsp-pas"; |
| 4330 |
reg = <0x0 0x17300000 0x0 0x4040>; |
| 4331 |
|
| 4332 |
interrupts-extended = <&intc GIC_SPI 162 IRQ_TYPE_EDGE_RISING>, |
| 4333 |
<&adsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, |
| 4334 |
<&adsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, |
| 4335 |
<&adsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, |
| 4336 |
<&adsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>; |
| 4337 |
interrupt-names = "wdog", "fatal", "ready", |
| 4338 |
"handover", "stop-ack"; |
| 4339 |
|
| 4340 |
clocks = <&rpmhcc RPMH_CXO_CLK>; |
| 4341 |
clock-names = "xo"; |
| 4342 |
|
| 4343 |
power-domains = <&rpmhpd SM8150_CX>; |
| 4344 |
|
| 4345 |
memory-region = <&adsp_mem>; |
| 4346 |
|
| 4347 |
qcom,qmp = <&aoss_qmp>; |
| 4348 |
|
| 4349 |
qcom,smem-states = <&adsp_smp2p_out 0>; |
| 4350 |
qcom,smem-state-names = "stop"; |
| 4351 |
|
| 4352 |
status = "disabled"; |
| 4353 |
|
| 4354 |
glink-edge { |
| 4355 |
interrupts = <GIC_SPI 156 IRQ_TYPE_EDGE_RISING>; |
| 4356 |
label = "lpass"; |
| 4357 |
qcom,remote-pid = <2>; |
| 4358 |
mboxes = <&apss_shared 8>; |
| 4359 |
|
| 4360 |
fastrpc { |
| 4361 |
compatible = "qcom,fastrpc"; |
| 4362 |
qcom,glink-channels = "fastrpcglink-apps-dsp"; |
| 4363 |
label = "adsp"; |
| 4364 |
qcom,non-secure-domain; |
| 4365 |
#address-cells = <1>; |
| 4366 |
#size-cells = <0>; |
| 4367 |
|
| 4368 |
compute-cb@3 { |
| 4369 |
compatible = "qcom,fastrpc-compute-cb"; |
| 4370 |
reg = <3>; |
| 4371 |
iommus = <&apps_smmu 0x1b23 0x0>; |
| 4372 |
}; |
| 4373 |
|
| 4374 |
compute-cb@4 { |
| 4375 |
compatible = "qcom,fastrpc-compute-cb"; |
| 4376 |
reg = <4>; |
| 4377 |
iommus = <&apps_smmu 0x1b24 0x0>; |
| 4378 |
}; |
| 4379 |
|
| 4380 |
compute-cb@5 { |
| 4381 |
compatible = "qcom,fastrpc-compute-cb"; |
| 4382 |
reg = <5>; |
| 4383 |
iommus = <&apps_smmu 0x1b25 0x0>; |
| 4384 |
}; |
| 4385 |
}; |
| 4386 |
}; |
| 4387 |
}; |
| 4388 |
|
| 4389 |
intc: interrupt-controller@17a00000 { |
| 4390 |
compatible = "arm,gic-v3"; |
| 4391 |
interrupt-controller; |
| 4392 |
#address-cells = <0>; |
| 4393 |
#interrupt-cells = <3>; |
| 4394 |
reg = <0x0 0x17a00000 0x0 0x10000>, /* GICD */ |
| 4395 |
<0x0 0x17a60000 0x0 0x100000>; /* GICR * 8 */ |
| 4396 |
interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; |
| 4397 |
}; |
| 4398 |
|
| 4399 |
apss_shared: mailbox@17c00000 { |
| 4400 |
compatible = "qcom,sm8150-apss-shared", |
| 4401 |
"qcom,sdm845-apss-shared"; |
| 4402 |
reg = <0x0 0x17c00000 0x0 0x1000>; |
| 4403 |
#mbox-cells = <1>; |
| 4404 |
}; |
| 4405 |
|
| 4406 |
watchdog@17c10000 { |
| 4407 |
compatible = "qcom,apss-wdt-sm8150", "qcom,kpss-wdt"; |
| 4408 |
reg = <0 0x17c10000 0 0x1000>; |
| 4409 |
clocks = <&sleep_clk>; |
| 4410 |
interrupts = <GIC_SPI 0 IRQ_TYPE_EDGE_RISING>; |
| 4411 |
}; |
| 4412 |
|
| 4413 |
timer@17c20000 { |
| 4414 |
#address-cells = <1>; |
| 4415 |
#size-cells = <1>; |
| 4416 |
ranges = <0 0 0 0x20000000>; |
| 4417 |
compatible = "arm,armv7-timer-mem"; |
| 4418 |
reg = <0x0 0x17c20000 0x0 0x1000>; |
| 4419 |
clock-frequency = <19200000>; |
| 4420 |
|
| 4421 |
frame@17c21000 { |
| 4422 |
frame-number = <0>; |
| 4423 |
interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, |
| 4424 |
<GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; |
| 4425 |
reg = <0x17c21000 0x1000>, |
| 4426 |
<0x17c22000 0x1000>; |
| 4427 |
}; |
| 4428 |
|
| 4429 |
frame@17c23000 { |
| 4430 |
frame-number = <1>; |
| 4431 |
interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; |
| 4432 |
reg = <0x17c23000 0x1000>; |
| 4433 |
status = "disabled"; |
| 4434 |
}; |
| 4435 |
|
| 4436 |
frame@17c25000 { |
| 4437 |
frame-number = <2>; |
| 4438 |
interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; |
| 4439 |
reg = <0x17c25000 0x1000>; |
| 4440 |
status = "disabled"; |
| 4441 |
}; |
| 4442 |
|
| 4443 |
frame@17c27000 { |
| 4444 |
frame-number = <3>; |
| 4445 |
interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; |
| 4446 |
reg = <0x17c27000 0x1000>; |
| 4447 |
status = "disabled"; |
| 4448 |
}; |
| 4449 |
|
| 4450 |
frame@17c29000 { |
| 4451 |
frame-number = <4>; |
| 4452 |
interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; |
| 4453 |
reg = <0x17c29000 0x1000>; |
| 4454 |
status = "disabled"; |
| 4455 |
}; |
| 4456 |
|
| 4457 |
frame@17c2b000 { |
| 4458 |
frame-number = <5>; |
| 4459 |
interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; |
| 4460 |
reg = <0x17c2b000 0x1000>; |
| 4461 |
status = "disabled"; |
| 4462 |
}; |
| 4463 |
|
| 4464 |
frame@17c2d000 { |
| 4465 |
frame-number = <6>; |
| 4466 |
interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; |
| 4467 |
reg = <0x17c2d000 0x1000>; |
| 4468 |
status = "disabled"; |
| 4469 |
}; |
| 4470 |
}; |
| 4471 |
|
| 4472 |
apps_rsc: rsc@18200000 { |
| 4473 |
label = "apps_rsc"; |
| 4474 |
compatible = "qcom,rpmh-rsc"; |
| 4475 |
reg = <0x0 0x18200000 0x0 0x10000>, |
| 4476 |
<0x0 0x18210000 0x0 0x10000>, |
| 4477 |
<0x0 0x18220000 0x0 0x10000>; |
| 4478 |
reg-names = "drv-0", "drv-1", "drv-2"; |
| 4479 |
interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>, |
| 4480 |
<GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>, |
| 4481 |
<GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>; |
| 4482 |
qcom,tcs-offset = <0xd00>; |
| 4483 |
qcom,drv-id = <2>; |
| 4484 |
qcom,tcs-config = <ACTIVE_TCS 2>, |
| 4485 |
<SLEEP_TCS 3>, |
| 4486 |
<WAKE_TCS 3>, |
| 4487 |
<CONTROL_TCS 1>; |
| 4488 |
power-domains = <&cluster_pd>; |
| 4489 |
|
| 4490 |
rpmhcc: clock-controller { |
| 4491 |
compatible = "qcom,sm8150-rpmh-clk"; |
| 4492 |
#clock-cells = <1>; |
| 4493 |
clock-names = "xo"; |
| 4494 |
clocks = <&xo_board>; |
| 4495 |
}; |
| 4496 |
|
| 4497 |
rpmhpd: power-controller { |
| 4498 |
compatible = "qcom,sm8150-rpmhpd"; |
| 4499 |
#power-domain-cells = <1>; |
| 4500 |
operating-points-v2 = <&rpmhpd_opp_table>; |
| 4501 |
|
| 4502 |
rpmhpd_opp_table: opp-table { |
| 4503 |
compatible = "operating-points-v2"; |
| 4504 |
|
| 4505 |
rpmhpd_opp_ret: opp1 { |
| 4506 |
opp-level = <RPMH_REGULATOR_LEVEL_RETENTION>; |
| 4507 |
}; |
| 4508 |
|
| 4509 |
rpmhpd_opp_min_svs: opp2 { |
| 4510 |
opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>; |
| 4511 |
}; |
| 4512 |
|
| 4513 |
rpmhpd_opp_low_svs: opp3 { |
| 4514 |
opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>; |
| 4515 |
}; |
| 4516 |
|
| 4517 |
rpmhpd_opp_svs: opp4 { |
| 4518 |
opp-level = <RPMH_REGULATOR_LEVEL_SVS>; |
| 4519 |
}; |
| 4520 |
|
| 4521 |
rpmhpd_opp_svs_l1: opp5 { |
| 4522 |
opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>; |
| 4523 |
}; |
| 4524 |
|
| 4525 |
rpmhpd_opp_svs_l2: opp6 { |
| 4526 |
opp-level = <224>; |
| 4527 |
}; |
| 4528 |
|
| 4529 |
rpmhpd_opp_nom: opp7 { |
| 4530 |
opp-level = <RPMH_REGULATOR_LEVEL_NOM>; |
| 4531 |
}; |
| 4532 |
|
| 4533 |
rpmhpd_opp_nom_l1: opp8 { |
| 4534 |
opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>; |
| 4535 |
}; |
| 4536 |
|
| 4537 |
rpmhpd_opp_nom_l2: opp9 { |
| 4538 |
opp-level = <RPMH_REGULATOR_LEVEL_NOM_L2>; |
| 4539 |
}; |
| 4540 |
|
| 4541 |
rpmhpd_opp_turbo: opp10 { |
| 4542 |
opp-level = <RPMH_REGULATOR_LEVEL_TURBO>; |
| 4543 |
}; |
| 4544 |
|
| 4545 |
rpmhpd_opp_turbo_l1: opp11 { |
| 4546 |
opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>; |
| 4547 |
}; |
| 4548 |
}; |
| 4549 |
}; |
| 4550 |
|
| 4551 |
apps_bcm_voter: bcm-voter { |
| 4552 |
compatible = "qcom,bcm-voter"; |
| 4553 |
}; |
| 4554 |
}; |
| 4555 |
|
| 4556 |
osm_l3: interconnect@18321000 { |
| 4557 |
compatible = "qcom,sm8150-osm-l3", "qcom,osm-l3"; |
| 4558 |
reg = <0 0x18321000 0 0x1400>; |
| 4559 |
|
| 4560 |
clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GPLL0>; |
| 4561 |
clock-names = "xo", "alternate"; |
| 4562 |
|
| 4563 |
#interconnect-cells = <1>; |
| 4564 |
}; |
| 4565 |
|
| 4566 |
cpufreq_hw: cpufreq@18323000 { |
| 4567 |
compatible = "qcom,sm8150-cpufreq-hw", "qcom,cpufreq-hw"; |
| 4568 |
reg = <0 0x18323000 0 0x1400>, <0 0x18325800 0 0x1400>, |
| 4569 |
<0 0x18327800 0 0x1400>; |
| 4570 |
reg-names = "freq-domain0", "freq-domain1", |
| 4571 |
"freq-domain2"; |
| 4572 |
|
| 4573 |
clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GPLL0>; |
| 4574 |
clock-names = "xo", "alternate"; |
| 4575 |
|
| 4576 |
#freq-domain-cells = <1>; |
| 4577 |
#clock-cells = <1>; |
| 4578 |
}; |
| 4579 |
|
| 4580 |
lmh_cluster1: lmh@18350800 { |
| 4581 |
compatible = "qcom,sm8150-lmh"; |
| 4582 |
reg = <0 0x18350800 0 0x400>; |
| 4583 |
interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; |
| 4584 |
cpus = <&cpu4>; |
| 4585 |
qcom,lmh-temp-arm-millicelsius = <60000>; |
| 4586 |
qcom,lmh-temp-low-millicelsius = <84500>; |
| 4587 |
qcom,lmh-temp-high-millicelsius = <85000>; |
| 4588 |
interrupt-controller; |
| 4589 |
#interrupt-cells = <1>; |
| 4590 |
}; |
| 4591 |
|
| 4592 |
lmh_cluster0: lmh@18358800 { |
| 4593 |
compatible = "qcom,sm8150-lmh"; |
| 4594 |
reg = <0 0x18358800 0 0x400>; |
| 4595 |
interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; |
| 4596 |
cpus = <&cpu0>; |
| 4597 |
qcom,lmh-temp-arm-millicelsius = <60000>; |
| 4598 |
qcom,lmh-temp-low-millicelsius = <84500>; |
| 4599 |
qcom,lmh-temp-high-millicelsius = <85000>; |
| 4600 |
interrupt-controller; |
| 4601 |
#interrupt-cells = <1>; |
| 4602 |
}; |
| 4603 |
|
| 4604 |
wifi: wifi@18800000 { |
| 4605 |
compatible = "qcom,wcn3990-wifi"; |
| 4606 |
reg = <0 0x18800000 0 0x800000>; |
| 4607 |
reg-names = "membase"; |
| 4608 |
memory-region = <&wlan_mem>; |
| 4609 |
clock-names = "cxo_ref_clk_pin", "qdss"; |
| 4610 |
clocks = <&rpmhcc RPMH_RF_CLK2>, <&aoss_qmp>; |
| 4611 |
interrupts = <GIC_SPI 414 IRQ_TYPE_LEVEL_HIGH>, |
| 4612 |
<GIC_SPI 415 IRQ_TYPE_LEVEL_HIGH>, |
| 4613 |
<GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH>, |
| 4614 |
<GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH>, |
| 4615 |
<GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>, |
| 4616 |
<GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>, |
| 4617 |
<GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH>, |
| 4618 |
<GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>, |
| 4619 |
<GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>, |
| 4620 |
<GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>, |
| 4621 |
<GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>, |
| 4622 |
<GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>; |
| 4623 |
iommus = <&apps_smmu 0x0640 0x1>; |
| 4624 |
status = "disabled"; |
| 4625 |
}; |
| 4626 |
}; |
| 4627 |
|
| 4628 |
timer { |
| 4629 |
compatible = "arm,armv8-timer"; |
| 4630 |
interrupts = <GIC_PPI 1 IRQ_TYPE_LEVEL_LOW>, |
| 4631 |
<GIC_PPI 2 IRQ_TYPE_LEVEL_LOW>, |
| 4632 |
<GIC_PPI 3 IRQ_TYPE_LEVEL_LOW>, |
| 4633 |
<GIC_PPI 0 IRQ_TYPE_LEVEL_LOW>; |
| 4634 |
}; |
| 4635 |
|
| 4636 |
thermal-zones { |
| 4637 |
cpu0-thermal { |
| 4638 |
polling-delay-passive = <250>; |
| 4639 |
|
| 4640 |
thermal-sensors = <&tsens0 1>; |
| 4641 |
|
| 4642 |
trips { |
| 4643 |
cpu0_alert0: trip-point0 { |
| 4644 |
temperature = <90000>; |
| 4645 |
hysteresis = <2000>; |
| 4646 |
type = "passive"; |
| 4647 |
}; |
| 4648 |
|
| 4649 |
cpu0_alert1: trip-point1 { |
| 4650 |
temperature = <95000>; |
| 4651 |
hysteresis = <2000>; |
| 4652 |
type = "passive"; |
| 4653 |
}; |
| 4654 |
|
| 4655 |
cpu0_crit: cpu-crit { |
| 4656 |
temperature = <110000>; |
| 4657 |
hysteresis = <1000>; |
| 4658 |
type = "critical"; |
| 4659 |
}; |
| 4660 |
}; |
| 4661 |
|
| 4662 |
cooling-maps { |
| 4663 |
map0 { |
| 4664 |
trip = <&cpu0_alert0>; |
| 4665 |
cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| 4666 |
<&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| 4667 |
<&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| 4668 |
<&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; |
| 4669 |
}; |
| 4670 |
map1 { |
| 4671 |
trip = <&cpu0_alert1>; |
| 4672 |
cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| 4673 |
<&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| 4674 |
<&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| 4675 |
<&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; |
| 4676 |
}; |
| 4677 |
}; |
| 4678 |
}; |
| 4679 |
|
| 4680 |
cpu1-thermal { |
| 4681 |
polling-delay-passive = <250>; |
| 4682 |
|
| 4683 |
thermal-sensors = <&tsens0 2>; |
| 4684 |
|
| 4685 |
trips { |
| 4686 |
cpu1_alert0: trip-point0 { |
| 4687 |
temperature = <90000>; |
| 4688 |
hysteresis = <2000>; |
| 4689 |
type = "passive"; |
| 4690 |
}; |
| 4691 |
|
| 4692 |
cpu1_alert1: trip-point1 { |
| 4693 |
temperature = <95000>; |
| 4694 |
hysteresis = <2000>; |
| 4695 |
type = "passive"; |
| 4696 |
}; |
| 4697 |
|
| 4698 |
cpu1_crit: cpu-crit { |
| 4699 |
temperature = <110000>; |
| 4700 |
hysteresis = <1000>; |
| 4701 |
type = "critical"; |
| 4702 |
}; |
| 4703 |
}; |
| 4704 |
|
| 4705 |
cooling-maps { |
| 4706 |
map0 { |
| 4707 |
trip = <&cpu1_alert0>; |
| 4708 |
cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| 4709 |
<&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| 4710 |
<&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| 4711 |
<&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; |
| 4712 |
}; |
| 4713 |
map1 { |
| 4714 |
trip = <&cpu1_alert1>; |
| 4715 |
cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| 4716 |
<&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| 4717 |
<&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| 4718 |
<&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; |
| 4719 |
}; |
| 4720 |
}; |
| 4721 |
}; |
| 4722 |
|
| 4723 |
cpu2-thermal { |
| 4724 |
polling-delay-passive = <250>; |
| 4725 |
|
| 4726 |
thermal-sensors = <&tsens0 3>; |
| 4727 |
|
| 4728 |
trips { |
| 4729 |
cpu2_alert0: trip-point0 { |
| 4730 |
temperature = <90000>; |
| 4731 |
hysteresis = <2000>; |
| 4732 |
type = "passive"; |
| 4733 |
}; |
| 4734 |
|
| 4735 |
cpu2_alert1: trip-point1 { |
| 4736 |
temperature = <95000>; |
| 4737 |
hysteresis = <2000>; |
| 4738 |
type = "passive"; |
| 4739 |
}; |
| 4740 |
|
| 4741 |
cpu2_crit: cpu-crit { |
| 4742 |
temperature = <110000>; |
| 4743 |
hysteresis = <1000>; |
| 4744 |
type = "critical"; |
| 4745 |
}; |
| 4746 |
}; |
| 4747 |
|
| 4748 |
cooling-maps { |
| 4749 |
map0 { |
| 4750 |
trip = <&cpu2_alert0>; |
| 4751 |
cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| 4752 |
<&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| 4753 |
<&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| 4754 |
<&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; |
| 4755 |
}; |
| 4756 |
map1 { |
| 4757 |
trip = <&cpu2_alert1>; |
| 4758 |
cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| 4759 |
<&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| 4760 |
<&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| 4761 |
<&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; |
| 4762 |
}; |
| 4763 |
}; |
| 4764 |
}; |
| 4765 |
|
| 4766 |
cpu3-thermal { |
| 4767 |
polling-delay-passive = <250>; |
| 4768 |
|
| 4769 |
thermal-sensors = <&tsens0 4>; |
| 4770 |
|
| 4771 |
trips { |
| 4772 |
cpu3_alert0: trip-point0 { |
| 4773 |
temperature = <90000>; |
| 4774 |
hysteresis = <2000>; |
| 4775 |
type = "passive"; |
| 4776 |
}; |
| 4777 |
|
| 4778 |
cpu3_alert1: trip-point1 { |
| 4779 |
temperature = <95000>; |
| 4780 |
hysteresis = <2000>; |
| 4781 |
type = "passive"; |
| 4782 |
}; |
| 4783 |
|
| 4784 |
cpu3_crit: cpu-crit { |
| 4785 |
temperature = <110000>; |
| 4786 |
hysteresis = <1000>; |
| 4787 |
type = "critical"; |
| 4788 |
}; |
| 4789 |
}; |
| 4790 |
|
| 4791 |
cooling-maps { |
| 4792 |
map0 { |
| 4793 |
trip = <&cpu3_alert0>; |
| 4794 |
cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| 4795 |
<&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| 4796 |
<&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| 4797 |
<&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; |
| 4798 |
}; |
| 4799 |
map1 { |
| 4800 |
trip = <&cpu3_alert1>; |
| 4801 |
cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| 4802 |
<&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| 4803 |
<&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| 4804 |
<&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; |
| 4805 |
}; |
| 4806 |
}; |
| 4807 |
}; |
| 4808 |
|
| 4809 |
cpu4-top-thermal { |
| 4810 |
polling-delay-passive = <250>; |
| 4811 |
|
| 4812 |
thermal-sensors = <&tsens0 7>; |
| 4813 |
|
| 4814 |
trips { |
| 4815 |
cpu4_top_alert0: trip-point0 { |
| 4816 |
temperature = <90000>; |
| 4817 |
hysteresis = <2000>; |
| 4818 |
type = "passive"; |
| 4819 |
}; |
| 4820 |
|
| 4821 |
cpu4_top_alert1: trip-point1 { |
| 4822 |
temperature = <95000>; |
| 4823 |
hysteresis = <2000>; |
| 4824 |
type = "passive"; |
| 4825 |
}; |
| 4826 |
|
| 4827 |
cpu4_top_crit: cpu-crit { |
| 4828 |
temperature = <110000>; |
| 4829 |
hysteresis = <1000>; |
| 4830 |
type = "critical"; |
| 4831 |
}; |
| 4832 |
}; |
| 4833 |
|
| 4834 |
cooling-maps { |
| 4835 |
map0 { |
| 4836 |
trip = <&cpu4_top_alert0>; |
| 4837 |
cooling-device = <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| 4838 |
<&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| 4839 |
<&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| 4840 |
<&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; |
| 4841 |
}; |
| 4842 |
map1 { |
| 4843 |
trip = <&cpu4_top_alert1>; |
| 4844 |
cooling-device = <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| 4845 |
<&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| 4846 |
<&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| 4847 |
<&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; |
| 4848 |
}; |
| 4849 |
}; |
| 4850 |
}; |
| 4851 |
|
| 4852 |
cpu5-top-thermal { |
| 4853 |
polling-delay-passive = <250>; |
| 4854 |
|
| 4855 |
thermal-sensors = <&tsens0 8>; |
| 4856 |
|
| 4857 |
trips { |
| 4858 |
cpu5_top_alert0: trip-point0 { |
| 4859 |
temperature = <90000>; |
| 4860 |
hysteresis = <2000>; |
| 4861 |
type = "passive"; |
| 4862 |
}; |
| 4863 |
|
| 4864 |
cpu5_top_alert1: trip-point1 { |
| 4865 |
temperature = <95000>; |
| 4866 |
hysteresis = <2000>; |
| 4867 |
type = "passive"; |
| 4868 |
}; |
| 4869 |
|
| 4870 |
cpu5_top_crit: cpu-crit { |
| 4871 |
temperature = <110000>; |
| 4872 |
hysteresis = <1000>; |
| 4873 |
type = "critical"; |
| 4874 |
}; |
| 4875 |
}; |
| 4876 |
|
| 4877 |
cooling-maps { |
| 4878 |
map0 { |
| 4879 |
trip = <&cpu5_top_alert0>; |
| 4880 |
cooling-device = <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| 4881 |
<&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| 4882 |
<&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| 4883 |
<&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; |
| 4884 |
}; |
| 4885 |
map1 { |
| 4886 |
trip = <&cpu5_top_alert1>; |
| 4887 |
cooling-device = <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| 4888 |
<&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| 4889 |
<&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| 4890 |
<&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; |
| 4891 |
}; |
| 4892 |
}; |
| 4893 |
}; |
| 4894 |
|
| 4895 |
cpu6-top-thermal { |
| 4896 |
polling-delay-passive = <250>; |
| 4897 |
|
| 4898 |
thermal-sensors = <&tsens0 9>; |
| 4899 |
|
| 4900 |
trips { |
| 4901 |
cpu6_top_alert0: trip-point0 { |
| 4902 |
temperature = <90000>; |
| 4903 |
hysteresis = <2000>; |
| 4904 |
type = "passive"; |
| 4905 |
}; |
| 4906 |
|
| 4907 |
cpu6_top_alert1: trip-point1 { |
| 4908 |
temperature = <95000>; |
| 4909 |
hysteresis = <2000>; |
| 4910 |
type = "passive"; |
| 4911 |
}; |
| 4912 |
|
| 4913 |
cpu6_top_crit: cpu-crit { |
| 4914 |
temperature = <110000>; |
| 4915 |
hysteresis = <1000>; |
| 4916 |
type = "critical"; |
| 4917 |
}; |
| 4918 |
}; |
| 4919 |
|
| 4920 |
cooling-maps { |
| 4921 |
map0 { |
| 4922 |
trip = <&cpu6_top_alert0>; |
| 4923 |
cooling-device = <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| 4924 |
<&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| 4925 |
<&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| 4926 |
<&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; |
| 4927 |
}; |
| 4928 |
map1 { |
| 4929 |
trip = <&cpu6_top_alert1>; |
| 4930 |
cooling-device = <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| 4931 |
<&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| 4932 |
<&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| 4933 |
<&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; |
| 4934 |
}; |
| 4935 |
}; |
| 4936 |
}; |
| 4937 |
|
| 4938 |
cpu7-top-thermal { |
| 4939 |
polling-delay-passive = <250>; |
| 4940 |
|
| 4941 |
thermal-sensors = <&tsens0 10>; |
| 4942 |
|
| 4943 |
trips { |
| 4944 |
cpu7_top_alert0: trip-point0 { |
| 4945 |
temperature = <90000>; |
| 4946 |
hysteresis = <2000>; |
| 4947 |
type = "passive"; |
| 4948 |
}; |
| 4949 |
|
| 4950 |
cpu7_top_alert1: trip-point1 { |
| 4951 |
temperature = <95000>; |
| 4952 |
hysteresis = <2000>; |
| 4953 |
type = "passive"; |
| 4954 |
}; |
| 4955 |
|
| 4956 |
cpu7_top_crit: cpu-crit { |
| 4957 |
temperature = <110000>; |
| 4958 |
hysteresis = <1000>; |
| 4959 |
type = "critical"; |
| 4960 |
}; |
| 4961 |
}; |
| 4962 |
|
| 4963 |
cooling-maps { |
| 4964 |
map0 { |
| 4965 |
trip = <&cpu7_top_alert0>; |
| 4966 |
cooling-device = <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| 4967 |
<&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| 4968 |
<&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| 4969 |
<&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; |
| 4970 |
}; |
| 4971 |
map1 { |
| 4972 |
trip = <&cpu7_top_alert1>; |
| 4973 |
cooling-device = <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| 4974 |
<&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| 4975 |
<&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| 4976 |
<&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; |
| 4977 |
}; |
| 4978 |
}; |
| 4979 |
}; |
| 4980 |
|
| 4981 |
cpu4-bottom-thermal { |
| 4982 |
polling-delay-passive = <250>; |
| 4983 |
|
| 4984 |
thermal-sensors = <&tsens0 11>; |
| 4985 |
|
| 4986 |
trips { |
| 4987 |
cpu4_bottom_alert0: trip-point0 { |
| 4988 |
temperature = <90000>; |
| 4989 |
hysteresis = <2000>; |
| 4990 |
type = "passive"; |
| 4991 |
}; |
| 4992 |
|
| 4993 |
cpu4_bottom_alert1: trip-point1 { |
| 4994 |
temperature = <95000>; |
| 4995 |
hysteresis = <2000>; |
| 4996 |
type = "passive"; |
| 4997 |
}; |
| 4998 |
|
| 4999 |
cpu4_bottom_crit: cpu-crit { |
| 5000 |
temperature = <110000>; |
| 5001 |
hysteresis = <1000>; |
| 5002 |
type = "critical"; |
| 5003 |
}; |
| 5004 |
}; |
| 5005 |
|
| 5006 |
cooling-maps { |
| 5007 |
map0 { |
| 5008 |
trip = <&cpu4_bottom_alert0>; |
| 5009 |
cooling-device = <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| 5010 |
<&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| 5011 |
<&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| 5012 |
<&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; |
| 5013 |
}; |
| 5014 |
map1 { |
| 5015 |
trip = <&cpu4_bottom_alert1>; |
| 5016 |
cooling-device = <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| 5017 |
<&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| 5018 |
<&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| 5019 |
<&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; |
| 5020 |
}; |
| 5021 |
}; |
| 5022 |
}; |
| 5023 |
|
| 5024 |
cpu5-bottom-thermal { |
| 5025 |
polling-delay-passive = <250>; |
| 5026 |
|
| 5027 |
thermal-sensors = <&tsens0 12>; |
| 5028 |
|
| 5029 |
trips { |
| 5030 |
cpu5_bottom_alert0: trip-point0 { |
| 5031 |
temperature = <90000>; |
| 5032 |
hysteresis = <2000>; |
| 5033 |
type = "passive"; |
| 5034 |
}; |
| 5035 |
|
| 5036 |
cpu5_bottom_alert1: trip-point1 { |
| 5037 |
temperature = <95000>; |
| 5038 |
hysteresis = <2000>; |
| 5039 |
type = "passive"; |
| 5040 |
}; |
| 5041 |
|
| 5042 |
cpu5_bottom_crit: cpu-crit { |
| 5043 |
temperature = <110000>; |
| 5044 |
hysteresis = <1000>; |
| 5045 |
type = "critical"; |
| 5046 |
}; |
| 5047 |
}; |
| 5048 |
|
| 5049 |
cooling-maps { |
| 5050 |
map0 { |
| 5051 |
trip = <&cpu5_bottom_alert0>; |
| 5052 |
cooling-device = <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| 5053 |
<&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| 5054 |
<&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| 5055 |
<&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; |
| 5056 |
}; |
| 5057 |
map1 { |
| 5058 |
trip = <&cpu5_bottom_alert1>; |
| 5059 |
cooling-device = <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| 5060 |
<&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| 5061 |
<&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| 5062 |
<&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; |
| 5063 |
}; |
| 5064 |
}; |
| 5065 |
}; |
| 5066 |
|
| 5067 |
cpu6-bottom-thermal { |
| 5068 |
polling-delay-passive = <250>; |
| 5069 |
|
| 5070 |
thermal-sensors = <&tsens0 13>; |
| 5071 |
|
| 5072 |
trips { |
| 5073 |
cpu6_bottom_alert0: trip-point0 { |
| 5074 |
temperature = <90000>; |
| 5075 |
hysteresis = <2000>; |
| 5076 |
type = "passive"; |
| 5077 |
}; |
| 5078 |
|
| 5079 |
cpu6_bottom_alert1: trip-point1 { |
| 5080 |
temperature = <95000>; |
| 5081 |
hysteresis = <2000>; |
| 5082 |
type = "passive"; |
| 5083 |
}; |
| 5084 |
|
| 5085 |
cpu6_bottom_crit: cpu-crit { |
| 5086 |
temperature = <110000>; |
| 5087 |
hysteresis = <1000>; |
| 5088 |
type = "critical"; |
| 5089 |
}; |
| 5090 |
}; |
| 5091 |
|
| 5092 |
cooling-maps { |
| 5093 |
map0 { |
| 5094 |
trip = <&cpu6_bottom_alert0>; |
| 5095 |
cooling-device = <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| 5096 |
<&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| 5097 |
<&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| 5098 |
<&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; |
| 5099 |
}; |
| 5100 |
map1 { |
| 5101 |
trip = <&cpu6_bottom_alert1>; |
| 5102 |
cooling-device = <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| 5103 |
<&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| 5104 |
<&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| 5105 |
<&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; |
| 5106 |
}; |
| 5107 |
}; |
| 5108 |
}; |
| 5109 |
|
| 5110 |
cpu7-bottom-thermal { |
| 5111 |
polling-delay-passive = <250>; |
| 5112 |
|
| 5113 |
thermal-sensors = <&tsens0 14>; |
| 5114 |
|
| 5115 |
trips { |
| 5116 |
cpu7_bottom_alert0: trip-point0 { |
| 5117 |
temperature = <90000>; |
| 5118 |
hysteresis = <2000>; |
| 5119 |
type = "passive"; |
| 5120 |
}; |
| 5121 |
|
| 5122 |
cpu7_bottom_alert1: trip-point1 { |
| 5123 |
temperature = <95000>; |
| 5124 |
hysteresis = <2000>; |
| 5125 |
type = "passive"; |
| 5126 |
}; |
| 5127 |
|
| 5128 |
cpu7_bottom_crit: cpu-crit { |
| 5129 |
temperature = <110000>; |
| 5130 |
hysteresis = <1000>; |
| 5131 |
type = "critical"; |
| 5132 |
}; |
| 5133 |
}; |
| 5134 |
|
| 5135 |
cooling-maps { |
| 5136 |
map0 { |
| 5137 |
trip = <&cpu7_bottom_alert0>; |
| 5138 |
cooling-device = <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| 5139 |
<&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| 5140 |
<&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| 5141 |
<&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; |
| 5142 |
}; |
| 5143 |
map1 { |
| 5144 |
trip = <&cpu7_bottom_alert1>; |
| 5145 |
cooling-device = <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| 5146 |
<&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| 5147 |
<&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| 5148 |
<&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; |
| 5149 |
}; |
| 5150 |
}; |
| 5151 |
}; |
| 5152 |
|
| 5153 |
aoss0-thermal { |
| 5154 |
polling-delay-passive = <250>; |
| 5155 |
|
| 5156 |
thermal-sensors = <&tsens0 0>; |
| 5157 |
|
| 5158 |
trips { |
| 5159 |
aoss0_alert0: trip-point0 { |
| 5160 |
temperature = <90000>; |
| 5161 |
hysteresis = <2000>; |
| 5162 |
type = "hot"; |
| 5163 |
}; |
| 5164 |
}; |
| 5165 |
}; |
| 5166 |
|
| 5167 |
cluster0-thermal { |
| 5168 |
polling-delay-passive = <250>; |
| 5169 |
|
| 5170 |
thermal-sensors = <&tsens0 5>; |
| 5171 |
|
| 5172 |
trips { |
| 5173 |
cluster0_alert0: trip-point0 { |
| 5174 |
temperature = <90000>; |
| 5175 |
hysteresis = <2000>; |
| 5176 |
type = "hot"; |
| 5177 |
}; |
| 5178 |
cluster0_crit: cluster0-crit { |
| 5179 |
temperature = <110000>; |
| 5180 |
hysteresis = <2000>; |
| 5181 |
type = "critical"; |
| 5182 |
}; |
| 5183 |
}; |
| 5184 |
}; |
| 5185 |
|
| 5186 |
cluster1-thermal { |
| 5187 |
polling-delay-passive = <250>; |
| 5188 |
|
| 5189 |
thermal-sensors = <&tsens0 6>; |
| 5190 |
|
| 5191 |
trips { |
| 5192 |
cluster1_alert0: trip-point0 { |
| 5193 |
temperature = <90000>; |
| 5194 |
hysteresis = <2000>; |
| 5195 |
type = "hot"; |
| 5196 |
}; |
| 5197 |
cluster1_crit: cluster1-crit { |
| 5198 |
temperature = <110000>; |
| 5199 |
hysteresis = <2000>; |
| 5200 |
type = "critical"; |
| 5201 |
}; |
| 5202 |
}; |
| 5203 |
}; |
| 5204 |
|
| 5205 |
gpu-top-thermal { |
| 5206 |
polling-delay-passive = <250>; |
| 5207 |
|
| 5208 |
thermal-sensors = <&tsens0 15>; |
| 5209 |
|
| 5210 |
cooling-maps { |
| 5211 |
map0 { |
| 5212 |
trip = <&gpu_top_alert0>; |
| 5213 |
cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; |
| 5214 |
}; |
| 5215 |
}; |
| 5216 |
|
| 5217 |
trips { |
| 5218 |
gpu_top_alert0: trip-point0 { |
| 5219 |
temperature = <85000>; |
| 5220 |
hysteresis = <1000>; |
| 5221 |
type = "passive"; |
| 5222 |
}; |
| 5223 |
|
| 5224 |
trip-point1 { |
| 5225 |
temperature = <90000>; |
| 5226 |
hysteresis = <1000>; |
| 5227 |
type = "hot"; |
| 5228 |
}; |
| 5229 |
|
| 5230 |
trip-point2 { |
| 5231 |
temperature = <110000>; |
| 5232 |
hysteresis = <1000>; |
| 5233 |
type = "critical"; |
| 5234 |
}; |
| 5235 |
}; |
| 5236 |
}; |
| 5237 |
|
| 5238 |
aoss1-thermal { |
| 5239 |
polling-delay-passive = <250>; |
| 5240 |
|
| 5241 |
thermal-sensors = <&tsens1 0>; |
| 5242 |
|
| 5243 |
trips { |
| 5244 |
aoss1_alert0: trip-point0 { |
| 5245 |
temperature = <90000>; |
| 5246 |
hysteresis = <2000>; |
| 5247 |
type = "hot"; |
| 5248 |
}; |
| 5249 |
}; |
| 5250 |
}; |
| 5251 |
|
| 5252 |
wlan-thermal { |
| 5253 |
polling-delay-passive = <250>; |
| 5254 |
|
| 5255 |
thermal-sensors = <&tsens1 1>; |
| 5256 |
|
| 5257 |
trips { |
| 5258 |
wlan_alert0: trip-point0 { |
| 5259 |
temperature = <90000>; |
| 5260 |
hysteresis = <2000>; |
| 5261 |
type = "hot"; |
| 5262 |
}; |
| 5263 |
}; |
| 5264 |
}; |
| 5265 |
|
| 5266 |
video-thermal { |
| 5267 |
polling-delay-passive = <250>; |
| 5268 |
|
| 5269 |
thermal-sensors = <&tsens1 2>; |
| 5270 |
|
| 5271 |
trips { |
| 5272 |
video_alert0: trip-point0 { |
| 5273 |
temperature = <90000>; |
| 5274 |
hysteresis = <2000>; |
| 5275 |
type = "hot"; |
| 5276 |
}; |
| 5277 |
}; |
| 5278 |
}; |
| 5279 |
|
| 5280 |
mem-thermal { |
| 5281 |
polling-delay-passive = <250>; |
| 5282 |
|
| 5283 |
thermal-sensors = <&tsens1 3>; |
| 5284 |
|
| 5285 |
trips { |
| 5286 |
mem_alert0: trip-point0 { |
| 5287 |
temperature = <90000>; |
| 5288 |
hysteresis = <2000>; |
| 5289 |
type = "hot"; |
| 5290 |
}; |
| 5291 |
}; |
| 5292 |
}; |
| 5293 |
|
| 5294 |
q6-hvx-thermal { |
| 5295 |
polling-delay-passive = <250>; |
| 5296 |
|
| 5297 |
thermal-sensors = <&tsens1 4>; |
| 5298 |
|
| 5299 |
trips { |
| 5300 |
q6_hvx_alert0: trip-point0 { |
| 5301 |
temperature = <90000>; |
| 5302 |
hysteresis = <2000>; |
| 5303 |
type = "hot"; |
| 5304 |
}; |
| 5305 |
}; |
| 5306 |
}; |
| 5307 |
|
| 5308 |
camera-thermal { |
| 5309 |
polling-delay-passive = <250>; |
| 5310 |
|
| 5311 |
thermal-sensors = <&tsens1 5>; |
| 5312 |
|
| 5313 |
trips { |
| 5314 |
camera_alert0: trip-point0 { |
| 5315 |
temperature = <90000>; |
| 5316 |
hysteresis = <2000>; |
| 5317 |
type = "hot"; |
| 5318 |
}; |
| 5319 |
}; |
| 5320 |
}; |
| 5321 |
|
| 5322 |
compute-thermal { |
| 5323 |
polling-delay-passive = <250>; |
| 5324 |
|
| 5325 |
thermal-sensors = <&tsens1 6>; |
| 5326 |
|
| 5327 |
trips { |
| 5328 |
compute_alert0: trip-point0 { |
| 5329 |
temperature = <90000>; |
| 5330 |
hysteresis = <2000>; |
| 5331 |
type = "hot"; |
| 5332 |
}; |
| 5333 |
}; |
| 5334 |
}; |
| 5335 |
|
| 5336 |
modem-thermal { |
| 5337 |
polling-delay-passive = <250>; |
| 5338 |
|
| 5339 |
thermal-sensors = <&tsens1 7>; |
| 5340 |
|
| 5341 |
trips { |
| 5342 |
modem_alert0: trip-point0 { |
| 5343 |
temperature = <90000>; |
| 5344 |
hysteresis = <2000>; |
| 5345 |
type = "hot"; |
| 5346 |
}; |
| 5347 |
}; |
| 5348 |
}; |
| 5349 |
|
| 5350 |
npu-thermal { |
| 5351 |
polling-delay-passive = <250>; |
| 5352 |
|
| 5353 |
thermal-sensors = <&tsens1 8>; |
| 5354 |
|
| 5355 |
trips { |
| 5356 |
npu_alert0: trip-point0 { |
| 5357 |
temperature = <90000>; |
| 5358 |
hysteresis = <2000>; |
| 5359 |
type = "hot"; |
| 5360 |
}; |
| 5361 |
}; |
| 5362 |
}; |
| 5363 |
|
| 5364 |
modem-vec-thermal { |
| 5365 |
polling-delay-passive = <250>; |
| 5366 |
|
| 5367 |
thermal-sensors = <&tsens1 9>; |
| 5368 |
|
| 5369 |
trips { |
| 5370 |
modem_vec_alert0: trip-point0 { |
| 5371 |
temperature = <90000>; |
| 5372 |
hysteresis = <2000>; |
| 5373 |
type = "hot"; |
| 5374 |
}; |
| 5375 |
}; |
| 5376 |
}; |
| 5377 |
|
| 5378 |
modem-scl-thermal { |
| 5379 |
polling-delay-passive = <250>; |
| 5380 |
|
| 5381 |
thermal-sensors = <&tsens1 10>; |
| 5382 |
|
| 5383 |
trips { |
| 5384 |
modem_scl_alert0: trip-point0 { |
| 5385 |
temperature = <90000>; |
| 5386 |
hysteresis = <2000>; |
| 5387 |
type = "hot"; |
| 5388 |
}; |
| 5389 |
}; |
| 5390 |
}; |
| 5391 |
|
| 5392 |
gpu-bottom-thermal { |
| 5393 |
polling-delay-passive = <250>; |
| 5394 |
|
| 5395 |
thermal-sensors = <&tsens1 11>; |
| 5396 |
|
| 5397 |
cooling-maps { |
| 5398 |
map0 { |
| 5399 |
trip = <&gpu_bottom_alert0>; |
| 5400 |
cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; |
| 5401 |
}; |
| 5402 |
}; |
| 5403 |
|
| 5404 |
trips { |
| 5405 |
gpu_bottom_alert0: trip-point0 { |
| 5406 |
temperature = <85000>; |
| 5407 |
hysteresis = <1000>; |
| 5408 |
type = "passive"; |
| 5409 |
}; |
| 5410 |
|
| 5411 |
trip-point1 { |
| 5412 |
temperature = <90000>; |
| 5413 |
hysteresis = <1000>; |
| 5414 |
type = "hot"; |
| 5415 |
}; |
| 5416 |
|
| 5417 |
trip-point2 { |
| 5418 |
temperature = <110000>; |
| 5419 |
hysteresis = <1000>; |
| 5420 |
type = "critical"; |
| 5421 |
}; |
| 5422 |
}; |
| 5423 |
}; |
| 5424 |
}; |
| 5425 |
}; |