| 1 |
// SPDX-License-Identifier: BSD-3-Clause |
| 2 |
/* |
| 3 |
* Copyright (c) 2022, Konrad Dybcio <[email protected]> |
| 4 |
*/ |
| 5 |
|
| 6 |
#include <dt-bindings/clock/qcom,rpmcc.h> |
| 7 |
#include <dt-bindings/clock/qcom,sm6375-gcc.h> |
| 8 |
#include <dt-bindings/clock/qcom,sm6375-gpucc.h> |
| 9 |
#include <dt-bindings/dma/qcom-gpi.h> |
| 10 |
#include <dt-bindings/firmware/qcom,scm.h> |
| 11 |
#include <dt-bindings/interconnect/qcom,osm-l3.h> |
| 12 |
#include <dt-bindings/interrupt-controller/arm-gic.h> |
| 13 |
#include <dt-bindings/mailbox/qcom-ipcc.h> |
| 14 |
#include <dt-bindings/power/qcom-rpmpd.h> |
| 15 |
|
| 16 |
/ { |
| 17 |
interrupt-parent = <&intc>; |
| 18 |
|
| 19 |
#address-cells = <2>; |
| 20 |
#size-cells = <2>; |
| 21 |
|
| 22 |
chosen { }; |
| 23 |
|
| 24 |
clocks { |
| 25 |
xo_board_clk: xo-board-clk { |
| 26 |
compatible = "fixed-clock"; |
| 27 |
#clock-cells = <0>; |
| 28 |
}; |
| 29 |
|
| 30 |
sleep_clk: sleep-clk { |
| 31 |
compatible = "fixed-clock"; |
| 32 |
clock-frequency = <32764>; |
| 33 |
#clock-cells = <0>; |
| 34 |
}; |
| 35 |
}; |
| 36 |
|
| 37 |
cpus { |
| 38 |
#address-cells = <2>; |
| 39 |
#size-cells = <0>; |
| 40 |
|
| 41 |
cpu0: cpu@0 { |
| 42 |
device_type = "cpu"; |
| 43 |
compatible = "qcom,kryo660"; |
| 44 |
reg = <0x0 0x0>; |
| 45 |
clocks = <&cpufreq_hw 0>; |
| 46 |
enable-method = "psci"; |
| 47 |
next-level-cache = <&l2_0>; |
| 48 |
qcom,freq-domain = <&cpufreq_hw 0>; |
| 49 |
operating-points-v2 = <&cpu0_opp_table>; |
| 50 |
interconnects = <&cpucp_l3 MASTER_EPSS_L3_APPS &cpucp_l3 SLAVE_EPSS_L3_SHARED>; |
| 51 |
power-domains = <&cpu_pd0>; |
| 52 |
power-domain-names = "psci"; |
| 53 |
#cooling-cells = <2>; |
| 54 |
l2_0: l2-cache { |
| 55 |
compatible = "cache"; |
| 56 |
cache-level = <2>; |
| 57 |
cache-unified; |
| 58 |
next-level-cache = <&l3_0>; |
| 59 |
l3_0: l3-cache { |
| 60 |
compatible = "cache"; |
| 61 |
cache-level = <3>; |
| 62 |
cache-unified; |
| 63 |
}; |
| 64 |
}; |
| 65 |
}; |
| 66 |
|
| 67 |
cpu1: cpu@100 { |
| 68 |
device_type = "cpu"; |
| 69 |
compatible = "qcom,kryo660"; |
| 70 |
reg = <0x0 0x100>; |
| 71 |
clocks = <&cpufreq_hw 0>; |
| 72 |
enable-method = "psci"; |
| 73 |
next-level-cache = <&l2_100>; |
| 74 |
qcom,freq-domain = <&cpufreq_hw 0>; |
| 75 |
operating-points-v2 = <&cpu0_opp_table>; |
| 76 |
interconnects = <&cpucp_l3 MASTER_EPSS_L3_APPS &cpucp_l3 SLAVE_EPSS_L3_SHARED>; |
| 77 |
power-domains = <&cpu_pd1>; |
| 78 |
power-domain-names = "psci"; |
| 79 |
#cooling-cells = <2>; |
| 80 |
l2_100: l2-cache { |
| 81 |
compatible = "cache"; |
| 82 |
cache-level = <2>; |
| 83 |
cache-unified; |
| 84 |
next-level-cache = <&l3_0>; |
| 85 |
}; |
| 86 |
}; |
| 87 |
|
| 88 |
cpu2: cpu@200 { |
| 89 |
device_type = "cpu"; |
| 90 |
compatible = "qcom,kryo660"; |
| 91 |
reg = <0x0 0x200>; |
| 92 |
clocks = <&cpufreq_hw 0>; |
| 93 |
enable-method = "psci"; |
| 94 |
next-level-cache = <&l2_200>; |
| 95 |
qcom,freq-domain = <&cpufreq_hw 0>; |
| 96 |
operating-points-v2 = <&cpu0_opp_table>; |
| 97 |
interconnects = <&cpucp_l3 MASTER_EPSS_L3_APPS &cpucp_l3 SLAVE_EPSS_L3_SHARED>; |
| 98 |
power-domains = <&cpu_pd2>; |
| 99 |
power-domain-names = "psci"; |
| 100 |
#cooling-cells = <2>; |
| 101 |
l2_200: l2-cache { |
| 102 |
compatible = "cache"; |
| 103 |
cache-level = <2>; |
| 104 |
cache-unified; |
| 105 |
next-level-cache = <&l3_0>; |
| 106 |
}; |
| 107 |
}; |
| 108 |
|
| 109 |
cpu3: cpu@300 { |
| 110 |
device_type = "cpu"; |
| 111 |
compatible = "qcom,kryo660"; |
| 112 |
reg = <0x0 0x300>; |
| 113 |
clocks = <&cpufreq_hw 0>; |
| 114 |
enable-method = "psci"; |
| 115 |
next-level-cache = <&l2_300>; |
| 116 |
qcom,freq-domain = <&cpufreq_hw 0>; |
| 117 |
operating-points-v2 = <&cpu0_opp_table>; |
| 118 |
interconnects = <&cpucp_l3 MASTER_EPSS_L3_APPS &cpucp_l3 SLAVE_EPSS_L3_SHARED>; |
| 119 |
power-domains = <&cpu_pd3>; |
| 120 |
power-domain-names = "psci"; |
| 121 |
#cooling-cells = <2>; |
| 122 |
l2_300: l2-cache { |
| 123 |
compatible = "cache"; |
| 124 |
cache-level = <2>; |
| 125 |
cache-unified; |
| 126 |
next-level-cache = <&l3_0>; |
| 127 |
}; |
| 128 |
}; |
| 129 |
|
| 130 |
cpu4: cpu@400 { |
| 131 |
device_type = "cpu"; |
| 132 |
compatible = "qcom,kryo660"; |
| 133 |
reg = <0x0 0x400>; |
| 134 |
clocks = <&cpufreq_hw 0>; |
| 135 |
enable-method = "psci"; |
| 136 |
next-level-cache = <&l2_400>; |
| 137 |
qcom,freq-domain = <&cpufreq_hw 0>; |
| 138 |
operating-points-v2 = <&cpu0_opp_table>; |
| 139 |
interconnects = <&cpucp_l3 MASTER_EPSS_L3_APPS &cpucp_l3 SLAVE_EPSS_L3_SHARED>; |
| 140 |
power-domains = <&cpu_pd4>; |
| 141 |
power-domain-names = "psci"; |
| 142 |
#cooling-cells = <2>; |
| 143 |
l2_400: l2-cache { |
| 144 |
compatible = "cache"; |
| 145 |
cache-level = <2>; |
| 146 |
cache-unified; |
| 147 |
next-level-cache = <&l3_0>; |
| 148 |
}; |
| 149 |
}; |
| 150 |
|
| 151 |
cpu5: cpu@500 { |
| 152 |
device_type = "cpu"; |
| 153 |
compatible = "qcom,kryo660"; |
| 154 |
reg = <0x0 0x500>; |
| 155 |
clocks = <&cpufreq_hw 0>; |
| 156 |
enable-method = "psci"; |
| 157 |
next-level-cache = <&l2_500>; |
| 158 |
qcom,freq-domain = <&cpufreq_hw 0>; |
| 159 |
operating-points-v2 = <&cpu0_opp_table>; |
| 160 |
interconnects = <&cpucp_l3 MASTER_EPSS_L3_APPS &cpucp_l3 SLAVE_EPSS_L3_SHARED>; |
| 161 |
power-domains = <&cpu_pd5>; |
| 162 |
power-domain-names = "psci"; |
| 163 |
#cooling-cells = <2>; |
| 164 |
l2_500: l2-cache { |
| 165 |
compatible = "cache"; |
| 166 |
cache-level = <2>; |
| 167 |
cache-unified; |
| 168 |
next-level-cache = <&l3_0>; |
| 169 |
}; |
| 170 |
}; |
| 171 |
|
| 172 |
cpu6: cpu@600 { |
| 173 |
device_type = "cpu"; |
| 174 |
compatible = "qcom,kryo660"; |
| 175 |
reg = <0x0 0x600>; |
| 176 |
clocks = <&cpufreq_hw 1>; |
| 177 |
enable-method = "psci"; |
| 178 |
next-level-cache = <&l2_600>; |
| 179 |
qcom,freq-domain = <&cpufreq_hw 1>; |
| 180 |
operating-points-v2 = <&cpu6_opp_table>; |
| 181 |
interconnects = <&cpucp_l3 MASTER_EPSS_L3_APPS &cpucp_l3 SLAVE_EPSS_L3_SHARED>; |
| 182 |
power-domains = <&cpu_pd6>; |
| 183 |
power-domain-names = "psci"; |
| 184 |
#cooling-cells = <2>; |
| 185 |
l2_600: l2-cache { |
| 186 |
compatible = "cache"; |
| 187 |
cache-level = <2>; |
| 188 |
cache-unified; |
| 189 |
next-level-cache = <&l3_0>; |
| 190 |
}; |
| 191 |
}; |
| 192 |
|
| 193 |
cpu7: cpu@700 { |
| 194 |
device_type = "cpu"; |
| 195 |
compatible = "qcom,kryo660"; |
| 196 |
reg = <0x0 0x700>; |
| 197 |
clocks = <&cpufreq_hw 1>; |
| 198 |
enable-method = "psci"; |
| 199 |
next-level-cache = <&l2_700>; |
| 200 |
qcom,freq-domain = <&cpufreq_hw 1>; |
| 201 |
operating-points-v2 = <&cpu6_opp_table>; |
| 202 |
interconnects = <&cpucp_l3 MASTER_EPSS_L3_APPS &cpucp_l3 SLAVE_EPSS_L3_SHARED>; |
| 203 |
power-domains = <&cpu_pd7>; |
| 204 |
power-domain-names = "psci"; |
| 205 |
#cooling-cells = <2>; |
| 206 |
l2_700: l2-cache { |
| 207 |
compatible = "cache"; |
| 208 |
cache-level = <2>; |
| 209 |
cache-unified; |
| 210 |
next-level-cache = <&l3_0>; |
| 211 |
}; |
| 212 |
}; |
| 213 |
|
| 214 |
cpu-map { |
| 215 |
cluster0 { |
| 216 |
core0 { |
| 217 |
cpu = <&cpu0>; |
| 218 |
}; |
| 219 |
|
| 220 |
core1 { |
| 221 |
cpu = <&cpu1>; |
| 222 |
}; |
| 223 |
|
| 224 |
core2 { |
| 225 |
cpu = <&cpu2>; |
| 226 |
}; |
| 227 |
|
| 228 |
core3 { |
| 229 |
cpu = <&cpu3>; |
| 230 |
}; |
| 231 |
|
| 232 |
core4 { |
| 233 |
cpu = <&cpu4>; |
| 234 |
}; |
| 235 |
|
| 236 |
core5 { |
| 237 |
cpu = <&cpu5>; |
| 238 |
}; |
| 239 |
|
| 240 |
core6 { |
| 241 |
cpu = <&cpu6>; |
| 242 |
}; |
| 243 |
|
| 244 |
core7 { |
| 245 |
cpu = <&cpu7>; |
| 246 |
}; |
| 247 |
}; |
| 248 |
}; |
| 249 |
|
| 250 |
idle-states { |
| 251 |
entry-method = "psci"; |
| 252 |
|
| 253 |
little_cpu_sleep_0: cpu-sleep-0-0 { |
| 254 |
compatible = "arm,idle-state"; |
| 255 |
idle-state-name = "silver-power-collapse"; |
| 256 |
arm,psci-suspend-param = <0x40000003>; |
| 257 |
entry-latency-us = <549>; |
| 258 |
exit-latency-us = <901>; |
| 259 |
min-residency-us = <1774>; |
| 260 |
local-timer-stop; |
| 261 |
}; |
| 262 |
|
| 263 |
little_cpu_sleep_1: cpu-sleep-0-1 { |
| 264 |
compatible = "arm,idle-state"; |
| 265 |
idle-state-name = "silver-rail-power-collapse"; |
| 266 |
arm,psci-suspend-param = <0x40000004>; |
| 267 |
entry-latency-us = <702>; |
| 268 |
exit-latency-us = <915>; |
| 269 |
min-residency-us = <4001>; |
| 270 |
local-timer-stop; |
| 271 |
}; |
| 272 |
|
| 273 |
big_cpu_sleep_0: cpu-sleep-1-0 { |
| 274 |
compatible = "arm,idle-state"; |
| 275 |
idle-state-name = "gold-power-collapse"; |
| 276 |
arm,psci-suspend-param = <0x40000003>; |
| 277 |
entry-latency-us = <523>; |
| 278 |
exit-latency-us = <1244>; |
| 279 |
min-residency-us = <2207>; |
| 280 |
local-timer-stop; |
| 281 |
}; |
| 282 |
|
| 283 |
big_cpu_sleep_1: cpu-sleep-1-1 { |
| 284 |
compatible = "arm,idle-state"; |
| 285 |
idle-state-name = "gold-rail-power-collapse"; |
| 286 |
arm,psci-suspend-param = <0x40000004>; |
| 287 |
entry-latency-us = <526>; |
| 288 |
exit-latency-us = <1854>; |
| 289 |
min-residency-us = <5555>; |
| 290 |
local-timer-stop; |
| 291 |
}; |
| 292 |
}; |
| 293 |
|
| 294 |
domain-idle-states { |
| 295 |
cluster_sleep_0: cluster-sleep-0 { |
| 296 |
compatible = "domain-idle-state"; |
| 297 |
arm,psci-suspend-param = <0x41000044>; |
| 298 |
entry-latency-us = <2752>; |
| 299 |
exit-latency-us = <3048>; |
| 300 |
min-residency-us = <6118>; |
| 301 |
}; |
| 302 |
}; |
| 303 |
}; |
| 304 |
|
| 305 |
firmware { |
| 306 |
scm { |
| 307 |
compatible = "qcom,scm-sm6375", "qcom,scm"; |
| 308 |
clocks = <&rpmcc RPM_SMD_CE1_CLK>; |
| 309 |
clock-names = "core"; |
| 310 |
#reset-cells = <1>; |
| 311 |
}; |
| 312 |
}; |
| 313 |
|
| 314 |
mpm: interrupt-controller { |
| 315 |
compatible = "qcom,mpm"; |
| 316 |
qcom,rpm-msg-ram = <&apss_mpm>; |
| 317 |
interrupts = <GIC_SPI 197 IRQ_TYPE_EDGE_RISING>; |
| 318 |
mboxes = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_SMP2P>; |
| 319 |
interrupt-controller; |
| 320 |
#interrupt-cells = <2>; |
| 321 |
#power-domain-cells = <0>; |
| 322 |
interrupt-parent = <&intc>; |
| 323 |
qcom,mpm-pin-count = <96>; |
| 324 |
qcom,mpm-pin-map = <5 296>, /* Soundwire wake_irq */ |
| 325 |
<12 422>, /* DWC3 ss_phy_irq */ |
| 326 |
<86 183>, /* MPM wake, SPMI */ |
| 327 |
<89 314>, /* TSENS0 0C */ |
| 328 |
<90 315>, /* TSENS1 0C */ |
| 329 |
<93 164>, /* DWC3 dm_hs_phy_irq */ |
| 330 |
<94 165>; /* DWC3 dp_hs_phy_irq */ |
| 331 |
}; |
| 332 |
|
| 333 |
memory@80000000 { |
| 334 |
device_type = "memory"; |
| 335 |
/* We expect the bootloader to fill in the size */ |
| 336 |
reg = <0x0 0x80000000 0x0 0x0>; |
| 337 |
}; |
| 338 |
|
| 339 |
cpu0_opp_table: opp-table-cpu0 { |
| 340 |
compatible = "operating-points-v2"; |
| 341 |
opp-shared; |
| 342 |
|
| 343 |
opp-300000000 { |
| 344 |
opp-hz = /bits/ 64 <300000000>; |
| 345 |
opp-peak-kBps = <(300000 * 32)>; |
| 346 |
}; |
| 347 |
|
| 348 |
opp-576000000 { |
| 349 |
opp-hz = /bits/ 64 <576000000>; |
| 350 |
opp-peak-kBps = <(556800 * 32)>; |
| 351 |
}; |
| 352 |
|
| 353 |
opp-691200000 { |
| 354 |
opp-hz = /bits/ 64 <691200000>; |
| 355 |
opp-peak-kBps = <(652800 * 32)>; |
| 356 |
}; |
| 357 |
|
| 358 |
opp-940800000 { |
| 359 |
opp-hz = /bits/ 64 <940800000>; |
| 360 |
opp-peak-kBps = <(921600 * 32)>; |
| 361 |
}; |
| 362 |
|
| 363 |
opp-1113600000 { |
| 364 |
opp-hz = /bits/ 64 <1113600000>; |
| 365 |
opp-peak-kBps = <(921600 * 32)>; |
| 366 |
}; |
| 367 |
|
| 368 |
opp-1324800000 { |
| 369 |
opp-hz = /bits/ 64 <1324800000>; |
| 370 |
opp-peak-kBps = <(1171200 * 32)>; |
| 371 |
}; |
| 372 |
|
| 373 |
opp-1516800000 { |
| 374 |
opp-hz = /bits/ 64 <1516800000>; |
| 375 |
opp-peak-kBps = <(1497600 * 32)>; |
| 376 |
}; |
| 377 |
|
| 378 |
opp-1651200000 { |
| 379 |
opp-hz = /bits/ 64 <1651200000>; |
| 380 |
opp-peak-kBps = <(1497600 * 32)>; |
| 381 |
}; |
| 382 |
|
| 383 |
opp-1708800000 { |
| 384 |
opp-hz = /bits/ 64 <1708800000>; |
| 385 |
opp-peak-kBps = <(1497600 * 32)>; |
| 386 |
}; |
| 387 |
|
| 388 |
opp-1804800000 { |
| 389 |
opp-hz = /bits/ 64 <1804800000>; |
| 390 |
opp-peak-kBps = <(1497600 * 32)>; |
| 391 |
}; |
| 392 |
}; |
| 393 |
|
| 394 |
cpu6_opp_table: opp-table-cpu6 { |
| 395 |
compatible = "operating-points-v2"; |
| 396 |
opp-shared; |
| 397 |
|
| 398 |
opp-691200000 { |
| 399 |
opp-hz = /bits/ 64 <691200000>; |
| 400 |
opp-peak-kBps = <(556800 * 32)>; |
| 401 |
}; |
| 402 |
|
| 403 |
opp-940800000 { |
| 404 |
opp-hz = /bits/ 64 <940800000>; |
| 405 |
opp-peak-kBps = <(921600 * 32)>; |
| 406 |
}; |
| 407 |
|
| 408 |
opp-1228800000 { |
| 409 |
opp-hz = /bits/ 64 <1228800000>; |
| 410 |
opp-peak-kBps = <(1171200 * 32)>; |
| 411 |
}; |
| 412 |
|
| 413 |
opp-1401600000 { |
| 414 |
opp-hz = /bits/ 64 <1401600000>; |
| 415 |
opp-peak-kBps = <(1382400 * 32)>; |
| 416 |
}; |
| 417 |
|
| 418 |
opp-1516800000 { |
| 419 |
opp-hz = /bits/ 64 <1516800000>; |
| 420 |
opp-peak-kBps = <(1497600 * 32)>; |
| 421 |
}; |
| 422 |
|
| 423 |
opp-1651200000 { |
| 424 |
opp-hz = /bits/ 64 <1651200000>; |
| 425 |
opp-peak-kBps = <(1497600 * 32)>; |
| 426 |
}; |
| 427 |
|
| 428 |
opp-1804800000 { |
| 429 |
opp-hz = /bits/ 64 <1804800000>; |
| 430 |
opp-peak-kBps = <(1497600 * 32)>; |
| 431 |
}; |
| 432 |
|
| 433 |
opp-1900800000 { |
| 434 |
opp-hz = /bits/ 64 <1900800000>; |
| 435 |
opp-peak-kBps = <(1497600 * 32)>; |
| 436 |
}; |
| 437 |
|
| 438 |
opp-2054400000 { |
| 439 |
opp-hz = /bits/ 64 <2054400000>; |
| 440 |
opp-peak-kBps = <(1497600 * 32)>; |
| 441 |
}; |
| 442 |
|
| 443 |
opp-2208000000 { |
| 444 |
opp-hz = /bits/ 64 <2208000000>; |
| 445 |
opp-peak-kBps = <(1497600 * 32)>; |
| 446 |
}; |
| 447 |
}; |
| 448 |
|
| 449 |
pmu { |
| 450 |
compatible = "arm,armv8-pmuv3"; |
| 451 |
interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>; |
| 452 |
}; |
| 453 |
|
| 454 |
psci { |
| 455 |
compatible = "arm,psci-1.0"; |
| 456 |
method = "smc"; |
| 457 |
|
| 458 |
cpu_pd0: power-domain-cpu0 { |
| 459 |
#power-domain-cells = <0>; |
| 460 |
power-domains = <&cluster_pd>; |
| 461 |
domain-idle-states = <&little_cpu_sleep_0 &little_cpu_sleep_1>; |
| 462 |
}; |
| 463 |
|
| 464 |
cpu_pd1: power-domain-cpu1 { |
| 465 |
#power-domain-cells = <0>; |
| 466 |
power-domains = <&cluster_pd>; |
| 467 |
domain-idle-states = <&little_cpu_sleep_0 &little_cpu_sleep_1>; |
| 468 |
}; |
| 469 |
|
| 470 |
cpu_pd2: power-domain-cpu2 { |
| 471 |
#power-domain-cells = <0>; |
| 472 |
power-domains = <&cluster_pd>; |
| 473 |
domain-idle-states = <&little_cpu_sleep_0 &little_cpu_sleep_1>; |
| 474 |
}; |
| 475 |
|
| 476 |
cpu_pd3: power-domain-cpu3 { |
| 477 |
#power-domain-cells = <0>; |
| 478 |
power-domains = <&cluster_pd>; |
| 479 |
domain-idle-states = <&little_cpu_sleep_0 &little_cpu_sleep_1>; |
| 480 |
}; |
| 481 |
|
| 482 |
cpu_pd4: power-domain-cpu4 { |
| 483 |
#power-domain-cells = <0>; |
| 484 |
power-domains = <&cluster_pd>; |
| 485 |
domain-idle-states = <&little_cpu_sleep_0 &little_cpu_sleep_1>; |
| 486 |
}; |
| 487 |
|
| 488 |
cpu_pd5: power-domain-cpu5 { |
| 489 |
#power-domain-cells = <0>; |
| 490 |
power-domains = <&cluster_pd>; |
| 491 |
domain-idle-states = <&little_cpu_sleep_0 &little_cpu_sleep_1>; |
| 492 |
}; |
| 493 |
|
| 494 |
cpu_pd6: power-domain-cpu6 { |
| 495 |
#power-domain-cells = <0>; |
| 496 |
power-domains = <&cluster_pd>; |
| 497 |
domain-idle-states = <&big_cpu_sleep_0 &big_cpu_sleep_1>; |
| 498 |
}; |
| 499 |
|
| 500 |
cpu_pd7: power-domain-cpu7 { |
| 501 |
#power-domain-cells = <0>; |
| 502 |
power-domains = <&cluster_pd>; |
| 503 |
domain-idle-states = <&big_cpu_sleep_0 &big_cpu_sleep_1>; |
| 504 |
}; |
| 505 |
|
| 506 |
cluster_pd: power-domain-cpu-cluster0 { |
| 507 |
#power-domain-cells = <0>; |
| 508 |
power-domains = <&mpm>; |
| 509 |
domain-idle-states = <&cluster_sleep_0>; |
| 510 |
}; |
| 511 |
}; |
| 512 |
|
| 513 |
qup_opp_table: opp-table-qup { |
| 514 |
compatible = "operating-points-v2"; |
| 515 |
|
| 516 |
opp-75000000 { |
| 517 |
opp-hz = /bits/ 64 <75000000>; |
| 518 |
required-opps = <&rpmpd_opp_low_svs>; |
| 519 |
}; |
| 520 |
|
| 521 |
opp-100000000 { |
| 522 |
opp-hz = /bits/ 64 <100000000>; |
| 523 |
required-opps = <&rpmpd_opp_svs>; |
| 524 |
}; |
| 525 |
|
| 526 |
opp-128000000 { |
| 527 |
opp-hz = /bits/ 64 <128000000>; |
| 528 |
required-opps = <&rpmpd_opp_nom>; |
| 529 |
}; |
| 530 |
}; |
| 531 |
|
| 532 |
reserved_memory: reserved-memory { |
| 533 |
#address-cells = <2>; |
| 534 |
#size-cells = <2>; |
| 535 |
ranges; |
| 536 |
|
| 537 |
hyp_mem: hypervisor@80000000 { |
| 538 |
reg = <0 0x80000000 0 0x600000>; |
| 539 |
no-map; |
| 540 |
}; |
| 541 |
|
| 542 |
xbl_aop_mem: xbl-aop@80700000 { |
| 543 |
reg = <0 0x80700000 0 0x100000>; |
| 544 |
no-map; |
| 545 |
}; |
| 546 |
|
| 547 |
reserved_xbl_uefi: xbl-uefi-res@80880000 { |
| 548 |
reg = <0 0x80880000 0 0x14000>; |
| 549 |
no-map; |
| 550 |
}; |
| 551 |
|
| 552 |
smem_mem: smem@80900000 { |
| 553 |
compatible = "qcom,smem"; |
| 554 |
reg = <0 0x80900000 0 0x200000>; |
| 555 |
hwlocks = <&tcsr_mutex 3>; |
| 556 |
no-map; |
| 557 |
}; |
| 558 |
|
| 559 |
fw_mem: fw@80b00000 { |
| 560 |
reg = <0 0x80b00000 0 0x100000>; |
| 561 |
no-map; |
| 562 |
}; |
| 563 |
|
| 564 |
cdsp_secure_heap_mem: cdsp-sec-heap@80c00000 { |
| 565 |
reg = <0 0x80c00000 0 0x1e00000>; |
| 566 |
no-map; |
| 567 |
}; |
| 568 |
|
| 569 |
dfps_data_mem: dpfs-data@85e00000 { |
| 570 |
reg = <0 0x85e00000 0 0x100000>; |
| 571 |
no-map; |
| 572 |
}; |
| 573 |
|
| 574 |
pil_wlan_mem: pil-wlan@86500000 { |
| 575 |
reg = <0 0x86500000 0 0x200000>; |
| 576 |
no-map; |
| 577 |
}; |
| 578 |
|
| 579 |
pil_adsp_mem: pil-adsp@86700000 { |
| 580 |
reg = <0 0x86700000 0 0x2000000>; |
| 581 |
no-map; |
| 582 |
}; |
| 583 |
|
| 584 |
pil_cdsp_mem: pil-cdsp@88700000 { |
| 585 |
reg = <0 0x88700000 0 0x1e00000>; |
| 586 |
no-map; |
| 587 |
}; |
| 588 |
|
| 589 |
pil_video_mem: pil-video@8a500000 { |
| 590 |
reg = <0 0x8a500000 0 0x500000>; |
| 591 |
no-map; |
| 592 |
}; |
| 593 |
|
| 594 |
pil_ipa_fw_mem: pil-ipa-fw@8aa00000 { |
| 595 |
reg = <0 0x8aa00000 0 0x10000>; |
| 596 |
no-map; |
| 597 |
}; |
| 598 |
|
| 599 |
pil_ipa_gsi_mem: pil-ipa-gsi@8aa10000 { |
| 600 |
reg = <0 0x8aa10000 0 0xa000>; |
| 601 |
no-map; |
| 602 |
}; |
| 603 |
|
| 604 |
pil_gpu_micro_code_mem: pil-gpu-ucode@8aa1a000 { |
| 605 |
reg = <0 0x8aa1a000 0 0x2000>; |
| 606 |
no-map; |
| 607 |
}; |
| 608 |
|
| 609 |
pil_mpss_wlan_mem: pil-mpss-wlan@8b800000 { |
| 610 |
reg = <0 0x8b800000 0 0x10000000>; |
| 611 |
no-map; |
| 612 |
}; |
| 613 |
|
| 614 |
removed_mem: removed@c0000000 { |
| 615 |
reg = <0 0xc0000000 0 0x5100000>; |
| 616 |
no-map; |
| 617 |
}; |
| 618 |
|
| 619 |
rmtfs_mem: rmtfs@f3900000 { |
| 620 |
compatible = "qcom,rmtfs-mem"; |
| 621 |
reg = <0 0xf3900000 0 0x280000>; |
| 622 |
no-map; |
| 623 |
|
| 624 |
qcom,client-id = <1>; |
| 625 |
qcom,vmid = <QCOM_SCM_VMID_MSS_MSA QCOM_SCM_VMID_NAV>; |
| 626 |
}; |
| 627 |
|
| 628 |
debug_mem: debug@ffb00000 { |
| 629 |
reg = <0 0xffb00000 0 0xc0000>; |
| 630 |
no-map; |
| 631 |
}; |
| 632 |
|
| 633 |
last_log_mem: lastlog@ffbc0000 { |
| 634 |
reg = <0 0xffbc0000 0 0x80000>; |
| 635 |
no-map; |
| 636 |
}; |
| 637 |
|
| 638 |
cmdline_region: cmdline@ffd00000 { |
| 639 |
reg = <0 0xffd00000 0 0x1000>; |
| 640 |
no-map; |
| 641 |
}; |
| 642 |
}; |
| 643 |
|
| 644 |
rpm: remoteproc { |
| 645 |
compatible = "qcom,sm6375-rpm-proc", "qcom,rpm-proc"; |
| 646 |
|
| 647 |
glink-edge { |
| 648 |
compatible = "qcom,glink-rpm"; |
| 649 |
interrupts-extended = <&ipcc IPCC_CLIENT_AOP |
| 650 |
IPCC_MPROC_SIGNAL_GLINK_QMP |
| 651 |
IRQ_TYPE_EDGE_RISING>; |
| 652 |
qcom,rpm-msg-ram = <&rpm_msg_ram>; |
| 653 |
mboxes = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_GLINK_QMP>; |
| 654 |
|
| 655 |
rpm_requests: rpm-requests { |
| 656 |
compatible = "qcom,rpm-sm6375", "qcom,glink-smd-rpm"; |
| 657 |
qcom,glink-channels = "rpm_requests"; |
| 658 |
|
| 659 |
rpmcc: clock-controller { |
| 660 |
compatible = "qcom,rpmcc-sm6375", "qcom,rpmcc"; |
| 661 |
clocks = <&xo_board_clk>; |
| 662 |
clock-names = "xo"; |
| 663 |
#clock-cells = <1>; |
| 664 |
}; |
| 665 |
|
| 666 |
rpmpd: power-controller { |
| 667 |
compatible = "qcom,sm6375-rpmpd"; |
| 668 |
#power-domain-cells = <1>; |
| 669 |
operating-points-v2 = <&rpmpd_opp_table>; |
| 670 |
|
| 671 |
rpmpd_opp_table: opp-table { |
| 672 |
compatible = "operating-points-v2"; |
| 673 |
|
| 674 |
rpmpd_opp_ret: opp1 { |
| 675 |
opp-level = <RPM_SMD_LEVEL_RETENTION>; |
| 676 |
}; |
| 677 |
|
| 678 |
rpmpd_opp_min_svs: opp2 { |
| 679 |
opp-level = <RPM_SMD_LEVEL_MIN_SVS>; |
| 680 |
}; |
| 681 |
|
| 682 |
rpmpd_opp_low_svs: opp3 { |
| 683 |
opp-level = <RPM_SMD_LEVEL_LOW_SVS>; |
| 684 |
}; |
| 685 |
|
| 686 |
rpmpd_opp_svs: opp4 { |
| 687 |
opp-level = <RPM_SMD_LEVEL_SVS>; |
| 688 |
}; |
| 689 |
|
| 690 |
rpmpd_opp_svs_plus: opp5 { |
| 691 |
opp-level = <RPM_SMD_LEVEL_SVS_PLUS>; |
| 692 |
}; |
| 693 |
|
| 694 |
rpmpd_opp_nom: opp6 { |
| 695 |
opp-level = <RPM_SMD_LEVEL_NOM>; |
| 696 |
}; |
| 697 |
|
| 698 |
rpmpd_opp_nom_plus: opp7 { |
| 699 |
opp-level = <RPM_SMD_LEVEL_NOM_PLUS>; |
| 700 |
}; |
| 701 |
|
| 702 |
rpmpd_opp_turbo: opp8 { |
| 703 |
opp-level = <RPM_SMD_LEVEL_TURBO>; |
| 704 |
}; |
| 705 |
|
| 706 |
rpmpd_opp_turbo_no_cpr: opp9 { |
| 707 |
opp-level = <RPM_SMD_LEVEL_TURBO_NO_CPR>; |
| 708 |
}; |
| 709 |
}; |
| 710 |
}; |
| 711 |
}; |
| 712 |
}; |
| 713 |
}; |
| 714 |
|
| 715 |
smp2p-adsp { |
| 716 |
compatible = "qcom,smp2p"; |
| 717 |
qcom,smem = <443>, <429>; |
| 718 |
interrupts-extended = <&ipcc IPCC_CLIENT_LPASS |
| 719 |
IPCC_MPROC_SIGNAL_SMP2P |
| 720 |
IRQ_TYPE_EDGE_RISING>; |
| 721 |
mboxes = <&ipcc IPCC_CLIENT_LPASS |
| 722 |
IPCC_MPROC_SIGNAL_SMP2P>; |
| 723 |
|
| 724 |
qcom,local-pid = <0>; |
| 725 |
qcom,remote-pid = <2>; |
| 726 |
|
| 727 |
smp2p_adsp_out: master-kernel { |
| 728 |
qcom,entry-name = "master-kernel"; |
| 729 |
#qcom,smem-state-cells = <1>; |
| 730 |
}; |
| 731 |
|
| 732 |
smp2p_adsp_in: slave-kernel { |
| 733 |
qcom,entry-name = "slave-kernel"; |
| 734 |
interrupt-controller; |
| 735 |
#interrupt-cells = <2>; |
| 736 |
}; |
| 737 |
}; |
| 738 |
|
| 739 |
smp2p-cdsp { |
| 740 |
compatible = "qcom,smp2p"; |
| 741 |
qcom,smem = <94>, <432>; |
| 742 |
interrupts-extended = <&ipcc IPCC_CLIENT_CDSP |
| 743 |
IPCC_MPROC_SIGNAL_SMP2P |
| 744 |
IRQ_TYPE_EDGE_RISING>; |
| 745 |
mboxes = <&ipcc IPCC_CLIENT_CDSP |
| 746 |
IPCC_MPROC_SIGNAL_SMP2P>; |
| 747 |
|
| 748 |
qcom,local-pid = <0>; |
| 749 |
qcom,remote-pid = <5>; |
| 750 |
|
| 751 |
smp2p_cdsp_out: master-kernel { |
| 752 |
qcom,entry-name = "master-kernel"; |
| 753 |
#qcom,smem-state-cells = <1>; |
| 754 |
}; |
| 755 |
|
| 756 |
smp2p_cdsp_in: slave-kernel { |
| 757 |
qcom,entry-name = "slave-kernel"; |
| 758 |
interrupt-controller; |
| 759 |
#interrupt-cells = <2>; |
| 760 |
}; |
| 761 |
}; |
| 762 |
|
| 763 |
smp2p-modem { |
| 764 |
compatible = "qcom,smp2p"; |
| 765 |
qcom,smem = <435>, <428>; |
| 766 |
interrupts-extended = <&ipcc IPCC_CLIENT_MPSS |
| 767 |
IPCC_MPROC_SIGNAL_SMP2P |
| 768 |
IRQ_TYPE_EDGE_RISING>; |
| 769 |
mboxes = <&ipcc IPCC_CLIENT_MPSS |
| 770 |
IPCC_MPROC_SIGNAL_SMP2P>; |
| 771 |
|
| 772 |
qcom,local-pid = <0>; |
| 773 |
qcom,remote-pid = <1>; |
| 774 |
|
| 775 |
smp2p_modem_out: master-kernel { |
| 776 |
qcom,entry-name = "master-kernel"; |
| 777 |
#qcom,smem-state-cells = <1>; |
| 778 |
}; |
| 779 |
|
| 780 |
smp2p_modem_in: slave-kernel { |
| 781 |
qcom,entry-name = "slave-kernel"; |
| 782 |
interrupt-controller; |
| 783 |
#interrupt-cells = <2>; |
| 784 |
}; |
| 785 |
|
| 786 |
ipa_smp2p_out: ipa-ap-to-modem { |
| 787 |
qcom,entry-name = "ipa"; |
| 788 |
#qcom,smem-state-cells = <1>; |
| 789 |
}; |
| 790 |
|
| 791 |
ipa_smp2p_in: ipa-modem-to-ap { |
| 792 |
qcom,entry-name = "ipa"; |
| 793 |
interrupt-controller; |
| 794 |
#interrupt-cells = <2>; |
| 795 |
}; |
| 796 |
|
| 797 |
wlan_smp2p_in: wlan-wpss-to-ap { |
| 798 |
qcom,entry-name = "wlan"; |
| 799 |
interrupt-controller; |
| 800 |
#interrupt-cells = <2>; |
| 801 |
}; |
| 802 |
}; |
| 803 |
|
| 804 |
soc: soc@0 { |
| 805 |
#address-cells = <2>; |
| 806 |
#size-cells = <2>; |
| 807 |
ranges = <0 0 0 0 0x10 0>; |
| 808 |
dma-ranges = <0 0 0 0 0x10 0>; |
| 809 |
compatible = "simple-bus"; |
| 810 |
|
| 811 |
ipcc: mailbox@208000 { |
| 812 |
compatible = "qcom,sm6375-ipcc", "qcom,ipcc"; |
| 813 |
reg = <0 0x00208000 0 0x1000>; |
| 814 |
interrupts = <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>; |
| 815 |
interrupt-controller; |
| 816 |
#interrupt-cells = <3>; |
| 817 |
#mbox-cells = <2>; |
| 818 |
}; |
| 819 |
|
| 820 |
tcsr_mutex: hwlock@340000 { |
| 821 |
compatible = "qcom,tcsr-mutex"; |
| 822 |
reg = <0x0 0x00340000 0x0 0x40000>; |
| 823 |
#hwlock-cells = <1>; |
| 824 |
}; |
| 825 |
|
| 826 |
tlmm: pinctrl@500000 { |
| 827 |
compatible = "qcom,sm6375-tlmm"; |
| 828 |
reg = <0 0x00500000 0 0x800000>; |
| 829 |
interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>; |
| 830 |
gpio-ranges = <&tlmm 0 0 157>; |
| 831 |
wakeup-parent = <&mpm>; |
| 832 |
interrupt-controller; |
| 833 |
gpio-controller; |
| 834 |
#interrupt-cells = <2>; |
| 835 |
#gpio-cells = <2>; |
| 836 |
|
| 837 |
sdc2_off_state: sdc2-off-state { |
| 838 |
clk-pins { |
| 839 |
pins = "sdc2_clk"; |
| 840 |
drive-strength = <2>; |
| 841 |
bias-disable; |
| 842 |
}; |
| 843 |
|
| 844 |
cmd-pins { |
| 845 |
pins = "sdc2_cmd"; |
| 846 |
drive-strength = <2>; |
| 847 |
bias-pull-up; |
| 848 |
}; |
| 849 |
|
| 850 |
data-pins { |
| 851 |
pins = "sdc2_data"; |
| 852 |
drive-strength = <2>; |
| 853 |
bias-pull-up; |
| 854 |
}; |
| 855 |
}; |
| 856 |
|
| 857 |
sdc2_on_state: sdc2-on-state { |
| 858 |
clk-pins { |
| 859 |
pins = "sdc2_clk"; |
| 860 |
drive-strength = <16>; |
| 861 |
bias-disable; |
| 862 |
}; |
| 863 |
|
| 864 |
cmd-pins { |
| 865 |
pins = "sdc2_cmd"; |
| 866 |
drive-strength = <10>; |
| 867 |
bias-pull-up; |
| 868 |
}; |
| 869 |
|
| 870 |
data-pins { |
| 871 |
pins = "sdc2_data"; |
| 872 |
drive-strength = <10>; |
| 873 |
bias-pull-up; |
| 874 |
}; |
| 875 |
}; |
| 876 |
|
| 877 |
qup_i2c0_default: qup-i2c0-default-state { |
| 878 |
pins = "gpio0", "gpio1"; |
| 879 |
function = "qup00"; |
| 880 |
drive-strength = <2>; |
| 881 |
bias-pull-up; |
| 882 |
}; |
| 883 |
|
| 884 |
qup_i2c1_default: qup-i2c1-default-state { |
| 885 |
pins = "gpio61", "gpio62"; |
| 886 |
function = "qup01"; |
| 887 |
drive-strength = <2>; |
| 888 |
bias-pull-up; |
| 889 |
}; |
| 890 |
|
| 891 |
qup_i2c2_default: qup-i2c2-default-state { |
| 892 |
pins = "gpio45", "gpio46"; |
| 893 |
function = "qup02"; |
| 894 |
drive-strength = <2>; |
| 895 |
bias-pull-up; |
| 896 |
}; |
| 897 |
|
| 898 |
qup_i2c8_default: qup-i2c8-default-state { |
| 899 |
pins = "gpio19", "gpio20"; |
| 900 |
/* TLMM, GCC and vendor DT all have different indices.. */ |
| 901 |
function = "qup12"; |
| 902 |
drive-strength = <2>; |
| 903 |
bias-pull-up; |
| 904 |
}; |
| 905 |
|
| 906 |
qup_i2c10_default: qup-i2c10-default-state { |
| 907 |
pins = "gpio4", "gpio5"; |
| 908 |
function = "qup10"; |
| 909 |
drive-strength = <2>; |
| 910 |
bias-pull-up; |
| 911 |
}; |
| 912 |
|
| 913 |
qup_spi0_default: qup-spi0-default-state { |
| 914 |
pins = "gpio0", "gpio1", "gpio2", "gpio3"; |
| 915 |
function = "qup00"; |
| 916 |
drive-strength = <6>; |
| 917 |
bias-disable; |
| 918 |
}; |
| 919 |
|
| 920 |
qup_uart1_default: qup-uart1-default-state { |
| 921 |
cts-pins { |
| 922 |
pins = "gpio61"; |
| 923 |
function = "qup01"; |
| 924 |
drive-strength = <2>; |
| 925 |
bias-pull-down; |
| 926 |
}; |
| 927 |
|
| 928 |
rts-pins { |
| 929 |
pins = "gpio62"; |
| 930 |
function = "qup01"; |
| 931 |
drive-strength = <2>; |
| 932 |
bias-disable; |
| 933 |
}; |
| 934 |
|
| 935 |
tx-pins { |
| 936 |
pins = "gpio63"; |
| 937 |
function = "qup01"; |
| 938 |
drive-strength = <2>; |
| 939 |
bias-disable; |
| 940 |
}; |
| 941 |
|
| 942 |
rx-pins { |
| 943 |
pins = "gpio64"; |
| 944 |
function = "qup01"; |
| 945 |
drive-strength = <2>; |
| 946 |
bias-pull-up; |
| 947 |
}; |
| 948 |
}; |
| 949 |
}; |
| 950 |
|
| 951 |
gcc: clock-controller@1400000 { |
| 952 |
compatible = "qcom,sm6375-gcc"; |
| 953 |
reg = <0 0x01400000 0 0x1f0000>; |
| 954 |
clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>, |
| 955 |
<&rpmcc RPM_SMD_XO_A_CLK_SRC>, |
| 956 |
<&sleep_clk>; |
| 957 |
#power-domain-cells = <1>; |
| 958 |
#clock-cells = <1>; |
| 959 |
#reset-cells = <1>; |
| 960 |
}; |
| 961 |
|
| 962 |
usb_1_hsphy: phy@162b000 { |
| 963 |
compatible = "qcom,sm6375-usb-hs-phy", "qcom,usb-snps-hs-7nm-phy"; |
| 964 |
reg = <0 0x0162b000 0 0x400>; |
| 965 |
|
| 966 |
clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>; |
| 967 |
clock-names = "ref"; |
| 968 |
resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>; |
| 969 |
#phy-cells = <0>; |
| 970 |
|
| 971 |
status = "disabled"; |
| 972 |
}; |
| 973 |
|
| 974 |
refgen: regulator@162f000 { |
| 975 |
compatible = "qcom,sm6375-refgen-regulator", |
| 976 |
"qcom,sm8250-refgen-regulator"; |
| 977 |
reg = <0x0 0x0162f000 0x0 0x84>; |
| 978 |
}; |
| 979 |
|
| 980 |
spmi_bus: spmi@1c40000 { |
| 981 |
compatible = "qcom,spmi-pmic-arb"; |
| 982 |
reg = <0 0x01c40000 0 0x1100>, |
| 983 |
<0 0x01e00000 0 0x2000000>, |
| 984 |
<0 0x03e00000 0 0x100000>, |
| 985 |
<0 0x03f00000 0 0xa0000>, |
| 986 |
<0 0x01c0a000 0 0x26000>; |
| 987 |
reg-names = "core", "chnls", "obsrvr", "intr", "cnfg"; |
| 988 |
interrupt-names = "periph_irq"; |
| 989 |
interrupts-extended = <&mpm 86 IRQ_TYPE_LEVEL_HIGH>; |
| 990 |
qcom,ee = <0>; |
| 991 |
qcom,channel = <0>; |
| 992 |
#address-cells = <2>; |
| 993 |
#size-cells = <0>; |
| 994 |
interrupt-controller; |
| 995 |
#interrupt-cells = <4>; |
| 996 |
}; |
| 997 |
|
| 998 |
tsens0: thermal-sensor@4411000 { |
| 999 |
compatible = "qcom,sm6375-tsens", "qcom,tsens-v2"; |
| 1000 |
reg = <0 0x04411000 0 0x140>, /* TM */ |
| 1001 |
<0 0x04410000 0 0x20>; /* SROT */ |
| 1002 |
interrupts = <GIC_SPI 275 IRQ_TYPE_LEVEL_HIGH>, |
| 1003 |
<GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>; |
| 1004 |
interrupt-names = "uplow", "critical"; |
| 1005 |
#thermal-sensor-cells = <1>; |
| 1006 |
#qcom,sensors = <15>; |
| 1007 |
}; |
| 1008 |
|
| 1009 |
tsens1: thermal-sensor@4413000 { |
| 1010 |
compatible = "qcom,sm6375-tsens", "qcom,tsens-v2"; |
| 1011 |
reg = <0 0x04413000 0 0x140>, /* TM */ |
| 1012 |
<0 0x04412000 0 0x20>; /* SROT */ |
| 1013 |
interrupts = <GIC_SPI 293 IRQ_TYPE_LEVEL_HIGH>, |
| 1014 |
<GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>; |
| 1015 |
interrupt-names = "uplow", "critical"; |
| 1016 |
#thermal-sensor-cells = <1>; |
| 1017 |
#qcom,sensors = <11>; |
| 1018 |
}; |
| 1019 |
|
| 1020 |
rpm_msg_ram: sram@45f0000 { |
| 1021 |
compatible = "qcom,rpm-msg-ram", "mmio-sram"; |
| 1022 |
reg = <0 0x045f0000 0 0x7000>; |
| 1023 |
#address-cells = <1>; |
| 1024 |
#size-cells = <1>; |
| 1025 |
ranges = <0 0x0 0x045f0000 0x7000>; |
| 1026 |
|
| 1027 |
apss_mpm: sram@1b8 { |
| 1028 |
reg = <0x1b8 0x48>; |
| 1029 |
}; |
| 1030 |
}; |
| 1031 |
|
| 1032 |
sram@4690000 { |
| 1033 |
compatible = "qcom,rpm-stats"; |
| 1034 |
reg = <0 0x04690000 0 0x400>; |
| 1035 |
}; |
| 1036 |
|
| 1037 |
sdhc_2: mmc@4784000 { |
| 1038 |
compatible = "qcom,sm6375-sdhci", "qcom,sdhci-msm-v5"; |
| 1039 |
reg = <0 0x04784000 0 0x1000>; |
| 1040 |
|
| 1041 |
interrupts = <GIC_SPI 350 IRQ_TYPE_LEVEL_HIGH>, |
| 1042 |
<GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>; |
| 1043 |
interrupt-names = "hc_irq", "pwr_irq"; |
| 1044 |
|
| 1045 |
clocks = <&gcc GCC_SDCC2_AHB_CLK>, |
| 1046 |
<&gcc GCC_SDCC2_APPS_CLK>, |
| 1047 |
<&rpmcc RPM_SMD_XO_CLK_SRC>; |
| 1048 |
clock-names = "iface", "core", "xo"; |
| 1049 |
resets = <&gcc GCC_SDCC2_BCR>; |
| 1050 |
iommus = <&apps_smmu 0x40 0x0>; |
| 1051 |
|
| 1052 |
pinctrl-0 = <&sdc2_on_state>; |
| 1053 |
pinctrl-1 = <&sdc2_off_state>; |
| 1054 |
pinctrl-names = "default", "sleep"; |
| 1055 |
|
| 1056 |
qcom,dll-config = <0x0007642c>; |
| 1057 |
qcom,ddr-config = <0x80040868>; |
| 1058 |
power-domains = <&rpmpd SM6375_VDDCX>; |
| 1059 |
operating-points-v2 = <&sdhc2_opp_table>; |
| 1060 |
bus-width = <4>; |
| 1061 |
|
| 1062 |
status = "disabled"; |
| 1063 |
|
| 1064 |
sdhc2_opp_table: opp-table { |
| 1065 |
compatible = "operating-points-v2"; |
| 1066 |
|
| 1067 |
opp-100000000 { |
| 1068 |
opp-hz = /bits/ 64 <100000000>; |
| 1069 |
required-opps = <&rpmpd_opp_low_svs>; |
| 1070 |
}; |
| 1071 |
|
| 1072 |
opp-202000000 { |
| 1073 |
opp-hz = /bits/ 64 <202000000>; |
| 1074 |
required-opps = <&rpmpd_opp_svs_plus>; |
| 1075 |
}; |
| 1076 |
}; |
| 1077 |
}; |
| 1078 |
|
| 1079 |
gpi_dma0: dma-controller@4a00000 { |
| 1080 |
compatible = "qcom,sm6375-gpi-dma", "qcom,sm6350-gpi-dma"; |
| 1081 |
reg = <0 0x04a00000 0 0x60000>; |
| 1082 |
interrupts = <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>, |
| 1083 |
<GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>, |
| 1084 |
<GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>, |
| 1085 |
<GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>, |
| 1086 |
<GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>, |
| 1087 |
<GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>, |
| 1088 |
<GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>, |
| 1089 |
<GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>, |
| 1090 |
<GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>, |
| 1091 |
<GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>; |
| 1092 |
dma-channels = <10>; |
| 1093 |
dma-channel-mask = <0x1f>; |
| 1094 |
iommus = <&apps_smmu 0x16 0x0>; |
| 1095 |
#dma-cells = <3>; |
| 1096 |
status = "disabled"; |
| 1097 |
}; |
| 1098 |
|
| 1099 |
qupv3_id_0: geniqup@4ac0000 { |
| 1100 |
compatible = "qcom,geni-se-qup"; |
| 1101 |
reg = <0x0 0x04ac0000 0x0 0x2000>; |
| 1102 |
clock-names = "m-ahb", "s-ahb"; |
| 1103 |
clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>, |
| 1104 |
<&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>; |
| 1105 |
iommus = <&apps_smmu 0x3 0x0>; |
| 1106 |
#address-cells = <2>; |
| 1107 |
#size-cells = <2>; |
| 1108 |
ranges; |
| 1109 |
status = "disabled"; |
| 1110 |
|
| 1111 |
i2c0: i2c@4a80000 { |
| 1112 |
compatible = "qcom,geni-i2c"; |
| 1113 |
reg = <0x0 0x04a80000 0x0 0x4000>; |
| 1114 |
clock-names = "se"; |
| 1115 |
clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>; |
| 1116 |
interrupts = <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>; |
| 1117 |
pinctrl-names = "default"; |
| 1118 |
pinctrl-0 = <&qup_i2c0_default>; |
| 1119 |
dmas = <&gpi_dma0 0 0 QCOM_GPI_I2C>, |
| 1120 |
<&gpi_dma0 1 0 QCOM_GPI_I2C>; |
| 1121 |
dma-names = "tx", "rx"; |
| 1122 |
#address-cells = <1>; |
| 1123 |
#size-cells = <0>; |
| 1124 |
status = "disabled"; |
| 1125 |
}; |
| 1126 |
|
| 1127 |
spi0: spi@4a80000 { |
| 1128 |
compatible = "qcom,geni-spi"; |
| 1129 |
reg = <0x0 0x04a80000 0x0 0x4000>; |
| 1130 |
clock-names = "se"; |
| 1131 |
clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>; |
| 1132 |
interrupts = <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>; |
| 1133 |
pinctrl-names = "default"; |
| 1134 |
pinctrl-0 = <&qup_spi0_default>; |
| 1135 |
power-domains = <&rpmpd SM6375_VDDCX>; |
| 1136 |
operating-points-v2 = <&qup_opp_table>; |
| 1137 |
dmas = <&gpi_dma0 0 0 QCOM_GPI_SPI>, |
| 1138 |
<&gpi_dma0 1 0 QCOM_GPI_SPI>; |
| 1139 |
dma-names = "tx", "rx"; |
| 1140 |
#address-cells = <1>; |
| 1141 |
#size-cells = <0>; |
| 1142 |
status = "disabled"; |
| 1143 |
}; |
| 1144 |
|
| 1145 |
i2c1: i2c@4a84000 { |
| 1146 |
compatible = "qcom,geni-i2c"; |
| 1147 |
reg = <0x0 0x04a84000 0x0 0x4000>; |
| 1148 |
clock-names = "se"; |
| 1149 |
clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>; |
| 1150 |
interrupts = <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>; |
| 1151 |
pinctrl-names = "default"; |
| 1152 |
pinctrl-0 = <&qup_i2c1_default>; |
| 1153 |
dmas = <&gpi_dma0 0 1 QCOM_GPI_I2C>, |
| 1154 |
<&gpi_dma0 1 1 QCOM_GPI_I2C>; |
| 1155 |
dma-names = "tx", "rx"; |
| 1156 |
#address-cells = <1>; |
| 1157 |
#size-cells = <0>; |
| 1158 |
status = "disabled"; |
| 1159 |
}; |
| 1160 |
|
| 1161 |
spi1: spi@4a84000 { |
| 1162 |
compatible = "qcom,geni-spi"; |
| 1163 |
reg = <0x0 0x04a84000 0x0 0x4000>; |
| 1164 |
clock-names = "se"; |
| 1165 |
clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>; |
| 1166 |
interrupts = <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>; |
| 1167 |
power-domains = <&rpmpd SM6375_VDDCX>; |
| 1168 |
operating-points-v2 = <&qup_opp_table>; |
| 1169 |
dmas = <&gpi_dma0 0 1 QCOM_GPI_SPI>, |
| 1170 |
<&gpi_dma0 1 1 QCOM_GPI_SPI>; |
| 1171 |
dma-names = "tx", "rx"; |
| 1172 |
#address-cells = <1>; |
| 1173 |
#size-cells = <0>; |
| 1174 |
status = "disabled"; |
| 1175 |
}; |
| 1176 |
|
| 1177 |
uart1: serial@4a84000 { |
| 1178 |
compatible = "qcom,geni-uart"; |
| 1179 |
reg = <0x0 0x04a84000 0x0 0x4000>; |
| 1180 |
interrupts = <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>; |
| 1181 |
clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>; |
| 1182 |
clock-names = "se"; |
| 1183 |
power-domains = <&rpmpd SM6375_VDDCX>; |
| 1184 |
operating-points-v2 = <&qup_opp_table>; |
| 1185 |
pinctrl-0 = <&qup_uart1_default>; |
| 1186 |
pinctrl-names = "default"; |
| 1187 |
status = "disabled"; |
| 1188 |
}; |
| 1189 |
|
| 1190 |
i2c2: i2c@4a88000 { |
| 1191 |
compatible = "qcom,geni-i2c"; |
| 1192 |
reg = <0x0 0x04a88000 0x0 0x4000>; |
| 1193 |
clock-names = "se"; |
| 1194 |
clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>; |
| 1195 |
interrupts = <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>; |
| 1196 |
pinctrl-names = "default"; |
| 1197 |
pinctrl-0 = <&qup_i2c2_default>; |
| 1198 |
dmas = <&gpi_dma0 0 2 QCOM_GPI_I2C>, |
| 1199 |
<&gpi_dma0 1 2 QCOM_GPI_I2C>; |
| 1200 |
dma-names = "tx", "rx"; |
| 1201 |
#address-cells = <1>; |
| 1202 |
#size-cells = <0>; |
| 1203 |
status = "disabled"; |
| 1204 |
}; |
| 1205 |
|
| 1206 |
spi2: spi@4a88000 { |
| 1207 |
compatible = "qcom,geni-spi"; |
| 1208 |
reg = <0x0 0x04a88000 0x0 0x4000>; |
| 1209 |
clock-names = "se"; |
| 1210 |
clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>; |
| 1211 |
interrupts = <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>; |
| 1212 |
power-domains = <&rpmpd SM6375_VDDCX>; |
| 1213 |
operating-points-v2 = <&qup_opp_table>; |
| 1214 |
dmas = <&gpi_dma0 0 2 QCOM_GPI_SPI>, |
| 1215 |
<&gpi_dma0 1 2 QCOM_GPI_SPI>; |
| 1216 |
dma-names = "tx", "rx"; |
| 1217 |
#address-cells = <1>; |
| 1218 |
#size-cells = <0>; |
| 1219 |
status = "disabled"; |
| 1220 |
}; |
| 1221 |
|
| 1222 |
/* |
| 1223 |
* As per GCC, QUP3/4/5/11 also exist, but are not even defined downstream. |
| 1224 |
* There is a comment in the included DTSI of another SoC saying that they |
| 1225 |
* are not "bolled out" (probably meaning not routed to solder balls) |
| 1226 |
* TLMM driver however, suggests there are as many as 15 QUPs in total! |
| 1227 |
* Most of which don't even have pin configurations for.. Sad stuff! |
| 1228 |
*/ |
| 1229 |
}; |
| 1230 |
|
| 1231 |
gpi_dma1: dma-controller@4c00000 { |
| 1232 |
compatible = "qcom,sm6375-gpi-dma", "qcom,sm6350-gpi-dma"; |
| 1233 |
reg = <0 0x04c00000 0 0x60000>; |
| 1234 |
interrupts = <GIC_SPI 497 IRQ_TYPE_LEVEL_HIGH>, |
| 1235 |
<GIC_SPI 498 IRQ_TYPE_LEVEL_HIGH>, |
| 1236 |
<GIC_SPI 499 IRQ_TYPE_LEVEL_HIGH>, |
| 1237 |
<GIC_SPI 500 IRQ_TYPE_LEVEL_HIGH>, |
| 1238 |
<GIC_SPI 501 IRQ_TYPE_LEVEL_HIGH>, |
| 1239 |
<GIC_SPI 502 IRQ_TYPE_LEVEL_HIGH>, |
| 1240 |
<GIC_SPI 503 IRQ_TYPE_LEVEL_HIGH>, |
| 1241 |
<GIC_SPI 504 IRQ_TYPE_LEVEL_HIGH>, |
| 1242 |
<GIC_SPI 505 IRQ_TYPE_LEVEL_HIGH>, |
| 1243 |
<GIC_SPI 506 IRQ_TYPE_LEVEL_HIGH>; |
| 1244 |
dma-channels = <10>; |
| 1245 |
dma-channel-mask = <0x1f>; |
| 1246 |
iommus = <&apps_smmu 0xd6 0x0>; |
| 1247 |
#dma-cells = <3>; |
| 1248 |
status = "disabled"; |
| 1249 |
}; |
| 1250 |
|
| 1251 |
qupv3_id_1: geniqup@4cc0000 { |
| 1252 |
compatible = "qcom,geni-se-qup"; |
| 1253 |
reg = <0x0 0x04cc0000 0x0 0x2000>; |
| 1254 |
clock-names = "m-ahb", "s-ahb"; |
| 1255 |
clocks = <&gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>, |
| 1256 |
<&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>; |
| 1257 |
iommus = <&apps_smmu 0xc3 0x0>; |
| 1258 |
#address-cells = <2>; |
| 1259 |
#size-cells = <2>; |
| 1260 |
ranges; |
| 1261 |
status = "disabled"; |
| 1262 |
|
| 1263 |
i2c6: i2c@4c80000 { |
| 1264 |
compatible = "qcom,geni-i2c"; |
| 1265 |
reg = <0x0 0x04c80000 0x0 0x4000>; |
| 1266 |
clock-names = "se"; |
| 1267 |
clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>; |
| 1268 |
interrupts = <GIC_SPI 507 IRQ_TYPE_LEVEL_HIGH>; |
| 1269 |
dmas = <&gpi_dma1 0 0 QCOM_GPI_I2C>, |
| 1270 |
<&gpi_dma1 1 0 QCOM_GPI_I2C>; |
| 1271 |
dma-names = "tx", "rx"; |
| 1272 |
#address-cells = <1>; |
| 1273 |
#size-cells = <0>; |
| 1274 |
status = "disabled"; |
| 1275 |
}; |
| 1276 |
|
| 1277 |
spi6: spi@4c80000 { |
| 1278 |
compatible = "qcom,geni-spi"; |
| 1279 |
reg = <0x0 0x04c80000 0x0 0x4000>; |
| 1280 |
clock-names = "se"; |
| 1281 |
clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>; |
| 1282 |
interrupts = <GIC_SPI 507 IRQ_TYPE_LEVEL_HIGH>; |
| 1283 |
power-domains = <&rpmpd SM6375_VDDCX>; |
| 1284 |
operating-points-v2 = <&qup_opp_table>; |
| 1285 |
dmas = <&gpi_dma1 0 0 QCOM_GPI_SPI>, |
| 1286 |
<&gpi_dma1 1 0 QCOM_GPI_SPI>; |
| 1287 |
dma-names = "tx", "rx"; |
| 1288 |
#address-cells = <1>; |
| 1289 |
#size-cells = <0>; |
| 1290 |
status = "disabled"; |
| 1291 |
}; |
| 1292 |
|
| 1293 |
i2c7: i2c@4c84000 { |
| 1294 |
compatible = "qcom,geni-i2c"; |
| 1295 |
reg = <0x0 0x04c84000 0x0 0x4000>; |
| 1296 |
clock-names = "se"; |
| 1297 |
clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>; |
| 1298 |
interrupts = <GIC_SPI 508 IRQ_TYPE_LEVEL_HIGH>; |
| 1299 |
dmas = <&gpi_dma1 0 1 QCOM_GPI_I2C>, |
| 1300 |
<&gpi_dma1 1 1 QCOM_GPI_I2C>; |
| 1301 |
dma-names = "tx", "rx"; |
| 1302 |
#address-cells = <1>; |
| 1303 |
#size-cells = <0>; |
| 1304 |
status = "disabled"; |
| 1305 |
}; |
| 1306 |
|
| 1307 |
spi7: spi@4c84000 { |
| 1308 |
compatible = "qcom,geni-spi"; |
| 1309 |
reg = <0x0 0x04c84000 0x0 0x4000>; |
| 1310 |
clock-names = "se"; |
| 1311 |
clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>; |
| 1312 |
interrupts = <GIC_SPI 508 IRQ_TYPE_LEVEL_HIGH>; |
| 1313 |
power-domains = <&rpmpd SM6375_VDDCX>; |
| 1314 |
operating-points-v2 = <&qup_opp_table>; |
| 1315 |
dmas = <&gpi_dma1 0 1 QCOM_GPI_SPI>, |
| 1316 |
<&gpi_dma1 1 1 QCOM_GPI_SPI>; |
| 1317 |
dma-names = "tx", "rx"; |
| 1318 |
#address-cells = <1>; |
| 1319 |
#size-cells = <0>; |
| 1320 |
status = "disabled"; |
| 1321 |
}; |
| 1322 |
|
| 1323 |
i2c8: i2c@4c88000 { |
| 1324 |
compatible = "qcom,geni-i2c"; |
| 1325 |
reg = <0x0 0x04c88000 0x0 0x4000>; |
| 1326 |
clock-names = "se"; |
| 1327 |
clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>; |
| 1328 |
interrupts = <GIC_SPI 509 IRQ_TYPE_LEVEL_HIGH>; |
| 1329 |
pinctrl-names = "default"; |
| 1330 |
pinctrl-0 = <&qup_i2c8_default>; |
| 1331 |
dmas = <&gpi_dma1 0 2 QCOM_GPI_I2C>, |
| 1332 |
<&gpi_dma1 1 2 QCOM_GPI_I2C>; |
| 1333 |
dma-names = "tx", "rx"; |
| 1334 |
#address-cells = <1>; |
| 1335 |
#size-cells = <0>; |
| 1336 |
status = "disabled"; |
| 1337 |
}; |
| 1338 |
|
| 1339 |
spi8: spi@4c88000 { |
| 1340 |
compatible = "qcom,geni-spi"; |
| 1341 |
reg = <0x0 0x04c88000 0x0 0x4000>; |
| 1342 |
clock-names = "se"; |
| 1343 |
clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>; |
| 1344 |
interrupts = <GIC_SPI 509 IRQ_TYPE_LEVEL_HIGH>; |
| 1345 |
power-domains = <&rpmpd SM6375_VDDCX>; |
| 1346 |
operating-points-v2 = <&qup_opp_table>; |
| 1347 |
dmas = <&gpi_dma1 0 2 QCOM_GPI_SPI>, |
| 1348 |
<&gpi_dma1 1 2 QCOM_GPI_SPI>; |
| 1349 |
dma-names = "tx", "rx"; |
| 1350 |
#address-cells = <1>; |
| 1351 |
#size-cells = <0>; |
| 1352 |
status = "disabled"; |
| 1353 |
}; |
| 1354 |
|
| 1355 |
i2c9: i2c@4c8c000 { |
| 1356 |
compatible = "qcom,geni-i2c"; |
| 1357 |
reg = <0x0 0x04c8c000 0x0 0x4000>; |
| 1358 |
clock-names = "se"; |
| 1359 |
clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>; |
| 1360 |
interrupts = <GIC_SPI 510 IRQ_TYPE_LEVEL_HIGH>; |
| 1361 |
dmas = <&gpi_dma1 0 3 QCOM_GPI_I2C>, |
| 1362 |
<&gpi_dma1 1 3 QCOM_GPI_I2C>; |
| 1363 |
dma-names = "tx", "rx"; |
| 1364 |
#address-cells = <1>; |
| 1365 |
#size-cells = <0>; |
| 1366 |
status = "disabled"; |
| 1367 |
}; |
| 1368 |
|
| 1369 |
spi9: spi@4c8c000 { |
| 1370 |
compatible = "qcom,geni-spi"; |
| 1371 |
reg = <0x0 0x04c8c000 0x0 0x4000>; |
| 1372 |
clock-names = "se"; |
| 1373 |
clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>; |
| 1374 |
interrupts = <GIC_SPI 510 IRQ_TYPE_LEVEL_HIGH>; |
| 1375 |
power-domains = <&rpmpd SM6375_VDDCX>; |
| 1376 |
operating-points-v2 = <&qup_opp_table>; |
| 1377 |
dmas = <&gpi_dma1 0 3 QCOM_GPI_SPI>, |
| 1378 |
<&gpi_dma1 1 3 QCOM_GPI_SPI>; |
| 1379 |
dma-names = "tx", "rx"; |
| 1380 |
#address-cells = <1>; |
| 1381 |
#size-cells = <0>; |
| 1382 |
status = "disabled"; |
| 1383 |
}; |
| 1384 |
|
| 1385 |
i2c10: i2c@4c90000 { |
| 1386 |
compatible = "qcom,geni-i2c"; |
| 1387 |
reg = <0x0 0x04c90000 0x0 0x4000>; |
| 1388 |
clock-names = "se"; |
| 1389 |
clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>; |
| 1390 |
interrupts = <GIC_SPI 511 IRQ_TYPE_LEVEL_HIGH>; |
| 1391 |
pinctrl-names = "default"; |
| 1392 |
pinctrl-0 = <&qup_i2c10_default>; |
| 1393 |
dmas = <&gpi_dma1 0 4 QCOM_GPI_I2C>, |
| 1394 |
<&gpi_dma1 1 4 QCOM_GPI_I2C>; |
| 1395 |
dma-names = "tx", "rx"; |
| 1396 |
#address-cells = <1>; |
| 1397 |
#size-cells = <0>; |
| 1398 |
status = "disabled"; |
| 1399 |
}; |
| 1400 |
|
| 1401 |
spi10: spi@4c90000 { |
| 1402 |
compatible = "qcom,geni-spi"; |
| 1403 |
reg = <0x0 0x04c90000 0x0 0x4000>; |
| 1404 |
clock-names = "se"; |
| 1405 |
clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>; |
| 1406 |
interrupts = <GIC_SPI 511 IRQ_TYPE_LEVEL_HIGH>; |
| 1407 |
power-domains = <&rpmpd SM6375_VDDCX>; |
| 1408 |
operating-points-v2 = <&qup_opp_table>; |
| 1409 |
dmas = <&gpi_dma1 0 4 QCOM_GPI_SPI>, |
| 1410 |
<&gpi_dma1 1 4 QCOM_GPI_SPI>; |
| 1411 |
dma-names = "tx", "rx"; |
| 1412 |
#address-cells = <1>; |
| 1413 |
#size-cells = <0>; |
| 1414 |
status = "disabled"; |
| 1415 |
}; |
| 1416 |
}; |
| 1417 |
|
| 1418 |
usb_1: usb@4ef8800 { |
| 1419 |
compatible = "qcom,sm6375-dwc3", "qcom,dwc3"; |
| 1420 |
reg = <0 0x04ef8800 0 0x400>; |
| 1421 |
|
| 1422 |
clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>, |
| 1423 |
<&gcc GCC_USB30_PRIM_MASTER_CLK>, |
| 1424 |
<&gcc GCC_SYS_NOC_USB3_PRIM_AXI_CLK>, |
| 1425 |
<&gcc GCC_USB30_PRIM_SLEEP_CLK>, |
| 1426 |
<&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>, |
| 1427 |
<&gcc GCC_USB3_PRIM_CLKREF_CLK>; |
| 1428 |
clock-names = "cfg_noc", |
| 1429 |
"core", |
| 1430 |
"iface", |
| 1431 |
"sleep", |
| 1432 |
"mock_utmi", |
| 1433 |
"xo"; |
| 1434 |
|
| 1435 |
assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>, |
| 1436 |
<&gcc GCC_USB30_PRIM_MASTER_CLK>; |
| 1437 |
assigned-clock-rates = <19200000>, <133333333>; |
| 1438 |
|
| 1439 |
interrupts-extended = <&intc GIC_SPI 302 IRQ_TYPE_LEVEL_HIGH>, |
| 1440 |
<&intc GIC_SPI 254 IRQ_TYPE_LEVEL_HIGH>, |
| 1441 |
<&mpm 94 IRQ_TYPE_EDGE_BOTH>, |
| 1442 |
<&mpm 93 IRQ_TYPE_EDGE_BOTH>, |
| 1443 |
<&mpm 12 IRQ_TYPE_LEVEL_HIGH>; |
| 1444 |
interrupt-names = "pwr_event", |
| 1445 |
"hs_phy_irq", |
| 1446 |
"dp_hs_phy_irq", |
| 1447 |
"dm_hs_phy_irq", |
| 1448 |
"ss_phy_irq"; |
| 1449 |
|
| 1450 |
power-domains = <&gcc USB30_PRIM_GDSC>; |
| 1451 |
|
| 1452 |
resets = <&gcc GCC_USB30_PRIM_BCR>; |
| 1453 |
|
| 1454 |
/* |
| 1455 |
* This property is there to allow USB2 to work, as |
| 1456 |
* USB3 is not implemented yet - (re)move it when |
| 1457 |
* proper support is in place. |
| 1458 |
*/ |
| 1459 |
qcom,select-utmi-as-pipe-clk; |
| 1460 |
|
| 1461 |
#address-cells = <2>; |
| 1462 |
#size-cells = <2>; |
| 1463 |
ranges; |
| 1464 |
|
| 1465 |
status = "disabled"; |
| 1466 |
|
| 1467 |
usb_1_dwc3: usb@4e00000 { |
| 1468 |
compatible = "snps,dwc3"; |
| 1469 |
reg = <0 0x04e00000 0 0xcd00>; |
| 1470 |
interrupts = <GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>; |
| 1471 |
maximum-speed = "high-speed"; |
| 1472 |
phys = <&usb_1_hsphy>; |
| 1473 |
phy-names = "usb2-phy"; |
| 1474 |
iommus = <&apps_smmu 0xe0 0x0>; |
| 1475 |
|
| 1476 |
/* Yes, this impl *does* have an unfunny number of quirks.. */ |
| 1477 |
snps,hird-threshold = /bits/ 8 <0x10>; |
| 1478 |
snps,usb2-gadget-lpm-disable; |
| 1479 |
snps,dis_u2_susphy_quirk; |
| 1480 |
snps,is-utmi-l1-suspend; |
| 1481 |
snps,dis-u1-entry-quirk; |
| 1482 |
snps,dis-u2-entry-quirk; |
| 1483 |
snps,usb3_lpm_capable; |
| 1484 |
snps,has-lpm-erratum; |
| 1485 |
tx-fifo-resize; |
| 1486 |
}; |
| 1487 |
}; |
| 1488 |
|
| 1489 |
adreno_smmu: iommu@5940000 { |
| 1490 |
compatible = "qcom,sm6375-smmu-v2", "qcom,smmu-v2"; |
| 1491 |
reg = <0 0x05940000 0 0x10000>; |
| 1492 |
#iommu-cells = <1>; |
| 1493 |
#global-interrupts = <2>; |
| 1494 |
interrupts = <GIC_SPI 379 IRQ_TYPE_LEVEL_HIGH>, |
| 1495 |
<GIC_SPI 381 IRQ_TYPE_LEVEL_HIGH>, |
| 1496 |
<GIC_SPI 457 IRQ_TYPE_LEVEL_HIGH>, |
| 1497 |
<GIC_SPI 458 IRQ_TYPE_LEVEL_HIGH>, |
| 1498 |
<GIC_SPI 459 IRQ_TYPE_LEVEL_HIGH>, |
| 1499 |
<GIC_SPI 460 IRQ_TYPE_LEVEL_HIGH>, |
| 1500 |
<GIC_SPI 461 IRQ_TYPE_LEVEL_HIGH>, |
| 1501 |
<GIC_SPI 462 IRQ_TYPE_LEVEL_HIGH>, |
| 1502 |
<GIC_SPI 463 IRQ_TYPE_LEVEL_HIGH>, |
| 1503 |
<GIC_SPI 464 IRQ_TYPE_LEVEL_HIGH>; |
| 1504 |
|
| 1505 |
clocks = <&gcc GCC_GPU_MEMNOC_GFX_CLK>; |
| 1506 |
clock-names = "bus"; |
| 1507 |
|
| 1508 |
power-domains = <&gpucc GPU_CX_GDSC>; |
| 1509 |
}; |
| 1510 |
|
| 1511 |
gpucc: clock-controller@5990000 { |
| 1512 |
compatible = "qcom,sm6375-gpucc"; |
| 1513 |
reg = <0 0x05990000 0 0x9000>; |
| 1514 |
clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>, |
| 1515 |
<&gcc GCC_GPU_GPLL0_CLK_SRC>, |
| 1516 |
<&gcc GCC_GPU_GPLL0_DIV_CLK_SRC>, |
| 1517 |
<&gcc GCC_GPU_SNOC_DVM_GFX_CLK>; |
| 1518 |
power-domains = <&rpmpd SM6375_VDDGX>; |
| 1519 |
required-opps = <&rpmpd_opp_low_svs>; |
| 1520 |
#clock-cells = <1>; |
| 1521 |
#reset-cells = <1>; |
| 1522 |
#power-domain-cells = <1>; |
| 1523 |
}; |
| 1524 |
|
| 1525 |
remoteproc_mss: remoteproc@6080000 { |
| 1526 |
compatible = "qcom,sm6375-mpss-pas"; |
| 1527 |
reg = <0x0 0x06080000 0x0 0x10000>; |
| 1528 |
|
| 1529 |
interrupts-extended = <&intc GIC_SPI 307 IRQ_TYPE_EDGE_RISING>, |
| 1530 |
<&smp2p_modem_in 0 IRQ_TYPE_EDGE_RISING>, |
| 1531 |
<&smp2p_modem_in 1 IRQ_TYPE_EDGE_RISING>, |
| 1532 |
<&smp2p_modem_in 2 IRQ_TYPE_EDGE_RISING>, |
| 1533 |
<&smp2p_modem_in 3 IRQ_TYPE_EDGE_RISING>, |
| 1534 |
<&smp2p_modem_in 7 IRQ_TYPE_EDGE_RISING>; |
| 1535 |
interrupt-names = "wdog", |
| 1536 |
"fatal", |
| 1537 |
"ready", |
| 1538 |
"handover", |
| 1539 |
"stop-ack", |
| 1540 |
"shutdown-ack"; |
| 1541 |
|
| 1542 |
clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>; |
| 1543 |
clock-names = "xo"; |
| 1544 |
|
| 1545 |
power-domains = <&rpmpd SM6375_VDDCX>; |
| 1546 |
power-domain-names = "cx"; |
| 1547 |
|
| 1548 |
memory-region = <&pil_mpss_wlan_mem>; |
| 1549 |
|
| 1550 |
qcom,smem-states = <&smp2p_modem_out 0>; |
| 1551 |
qcom,smem-state-names = "stop"; |
| 1552 |
|
| 1553 |
status = "disabled"; |
| 1554 |
|
| 1555 |
glink-edge { |
| 1556 |
interrupts-extended = <&ipcc IPCC_CLIENT_MPSS |
| 1557 |
IPCC_MPROC_SIGNAL_GLINK_QMP |
| 1558 |
IRQ_TYPE_EDGE_RISING>; |
| 1559 |
mboxes = <&ipcc IPCC_CLIENT_MPSS |
| 1560 |
IPCC_MPROC_SIGNAL_GLINK_QMP>; |
| 1561 |
label = "modem"; |
| 1562 |
qcom,remote-pid = <1>; |
| 1563 |
}; |
| 1564 |
}; |
| 1565 |
|
| 1566 |
remoteproc_adsp: remoteproc@a400000 { |
| 1567 |
compatible = "qcom,sm6375-adsp-pas"; |
| 1568 |
reg = <0 0x0a400000 0 0x10000>; |
| 1569 |
|
| 1570 |
interrupts-extended = <&intc GIC_SPI 282 IRQ_TYPE_EDGE_RISING>, |
| 1571 |
<&smp2p_adsp_in 0 IRQ_TYPE_EDGE_RISING>, |
| 1572 |
<&smp2p_adsp_in 1 IRQ_TYPE_EDGE_RISING>, |
| 1573 |
<&smp2p_adsp_in 2 IRQ_TYPE_EDGE_RISING>, |
| 1574 |
<&smp2p_adsp_in 3 IRQ_TYPE_EDGE_RISING>; |
| 1575 |
interrupt-names = "wdog", "fatal", "ready", |
| 1576 |
"handover", "stop-ack"; |
| 1577 |
|
| 1578 |
clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>; |
| 1579 |
clock-names = "xo"; |
| 1580 |
|
| 1581 |
power-domains = <&rpmpd SM6375_VDD_LPI_CX>, |
| 1582 |
<&rpmpd SM6375_VDD_LPI_MX>; |
| 1583 |
power-domain-names = "lcx", "lmx"; |
| 1584 |
|
| 1585 |
memory-region = <&pil_adsp_mem>; |
| 1586 |
|
| 1587 |
qcom,smem-states = <&smp2p_adsp_out 0>; |
| 1588 |
qcom,smem-state-names = "stop"; |
| 1589 |
|
| 1590 |
status = "disabled"; |
| 1591 |
|
| 1592 |
glink-edge { |
| 1593 |
interrupts-extended = <&ipcc IPCC_CLIENT_LPASS |
| 1594 |
IPCC_MPROC_SIGNAL_GLINK_QMP |
| 1595 |
IRQ_TYPE_EDGE_RISING>; |
| 1596 |
mboxes = <&ipcc IPCC_CLIENT_LPASS |
| 1597 |
IPCC_MPROC_SIGNAL_GLINK_QMP>; |
| 1598 |
|
| 1599 |
label = "lpass"; |
| 1600 |
qcom,remote-pid = <2>; |
| 1601 |
}; |
| 1602 |
}; |
| 1603 |
|
| 1604 |
remoteproc_cdsp: remoteproc@b300000 { |
| 1605 |
compatible = "qcom,sm6375-cdsp-pas"; |
| 1606 |
reg = <0x0 0x0b300000 0x0 0x10000>; |
| 1607 |
|
| 1608 |
interrupts-extended = <&intc GIC_SPI 265 IRQ_TYPE_EDGE_RISING>, |
| 1609 |
<&smp2p_cdsp_in 0 IRQ_TYPE_EDGE_RISING>, |
| 1610 |
<&smp2p_cdsp_in 1 IRQ_TYPE_EDGE_RISING>, |
| 1611 |
<&smp2p_cdsp_in 2 IRQ_TYPE_EDGE_RISING>, |
| 1612 |
<&smp2p_cdsp_in 3 IRQ_TYPE_EDGE_RISING>; |
| 1613 |
interrupt-names = "wdog", "fatal", "ready", |
| 1614 |
"handover", "stop-ack"; |
| 1615 |
|
| 1616 |
clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>; |
| 1617 |
clock-names = "xo"; |
| 1618 |
|
| 1619 |
power-domains = <&rpmpd SM6375_VDDCX>; |
| 1620 |
power-domain-names = "cx"; |
| 1621 |
|
| 1622 |
memory-region = <&pil_cdsp_mem>; |
| 1623 |
|
| 1624 |
qcom,smem-states = <&smp2p_cdsp_out 0>; |
| 1625 |
qcom,smem-state-names = "stop"; |
| 1626 |
|
| 1627 |
status = "disabled"; |
| 1628 |
|
| 1629 |
glink-edge { |
| 1630 |
interrupts-extended = <&ipcc IPCC_CLIENT_CDSP |
| 1631 |
IPCC_MPROC_SIGNAL_GLINK_QMP |
| 1632 |
IRQ_TYPE_EDGE_RISING>; |
| 1633 |
mboxes = <&ipcc IPCC_CLIENT_CDSP |
| 1634 |
IPCC_MPROC_SIGNAL_GLINK_QMP>; |
| 1635 |
label = "cdsp"; |
| 1636 |
qcom,remote-pid = <5>; |
| 1637 |
}; |
| 1638 |
}; |
| 1639 |
|
| 1640 |
sram@c125000 { |
| 1641 |
compatible = "qcom,sm6375-imem", "syscon", "simple-mfd"; |
| 1642 |
reg = <0 0x0c125000 0 0x1000>; |
| 1643 |
ranges = <0 0 0x0c125000 0x1000>; |
| 1644 |
|
| 1645 |
#address-cells = <1>; |
| 1646 |
#size-cells = <1>; |
| 1647 |
|
| 1648 |
pil-reloc@94c { |
| 1649 |
compatible = "qcom,pil-reloc-info"; |
| 1650 |
reg = <0x94c 0xc8>; |
| 1651 |
}; |
| 1652 |
}; |
| 1653 |
|
| 1654 |
apps_smmu: iommu@c600000 { |
| 1655 |
compatible = "qcom,sm6375-smmu-500", "arm,mmu-500"; |
| 1656 |
reg = <0 0x0c600000 0 0x100000>; |
| 1657 |
interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>, |
| 1658 |
<GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>, |
| 1659 |
<GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>, |
| 1660 |
<GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>, |
| 1661 |
<GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>, |
| 1662 |
<GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>, |
| 1663 |
<GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>, |
| 1664 |
<GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>, |
| 1665 |
<GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>, |
| 1666 |
<GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>, |
| 1667 |
<GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>, |
| 1668 |
<GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>, |
| 1669 |
<GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>, |
| 1670 |
<GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>, |
| 1671 |
<GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>, |
| 1672 |
<GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>, |
| 1673 |
<GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>, |
| 1674 |
<GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>, |
| 1675 |
<GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>, |
| 1676 |
<GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>, |
| 1677 |
<GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>, |
| 1678 |
<GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>, |
| 1679 |
<GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>, |
| 1680 |
<GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>, |
| 1681 |
<GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>, |
| 1682 |
<GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>, |
| 1683 |
<GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>, |
| 1684 |
<GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>, |
| 1685 |
<GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>, |
| 1686 |
<GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>, |
| 1687 |
<GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>, |
| 1688 |
<GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>, |
| 1689 |
<GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>, |
| 1690 |
<GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>, |
| 1691 |
<GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>, |
| 1692 |
<GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, |
| 1693 |
<GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>, |
| 1694 |
<GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>, |
| 1695 |
<GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>, |
| 1696 |
<GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>, |
| 1697 |
<GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>, |
| 1698 |
<GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>, |
| 1699 |
<GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>, |
| 1700 |
<GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>, |
| 1701 |
<GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>, |
| 1702 |
<GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>, |
| 1703 |
<GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>, |
| 1704 |
<GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>, |
| 1705 |
<GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>, |
| 1706 |
<GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>, |
| 1707 |
<GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>, |
| 1708 |
<GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>, |
| 1709 |
<GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>, |
| 1710 |
<GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>, |
| 1711 |
<GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>, |
| 1712 |
<GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>, |
| 1713 |
<GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>, |
| 1714 |
<GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>, |
| 1715 |
<GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>, |
| 1716 |
<GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>, |
| 1717 |
<GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>, |
| 1718 |
<GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>, |
| 1719 |
<GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>, |
| 1720 |
<GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>, |
| 1721 |
<GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>; |
| 1722 |
|
| 1723 |
power-domains = <&gcc HLOS1_VOTE_MM_SNOC_MMU_TBU_RT_GDSC>, |
| 1724 |
<&gcc HLOS1_VOTE_MM_SNOC_MMU_TBU_NRT_GDSC>, |
| 1725 |
<&gcc HLOS1_VOTE_TURING_MMU_TBU0_GDSC>; |
| 1726 |
#global-interrupts = <1>; |
| 1727 |
#iommu-cells = <2>; |
| 1728 |
}; |
| 1729 |
|
| 1730 |
wifi: wifi@c800000 { |
| 1731 |
compatible = "qcom,wcn3990-wifi"; |
| 1732 |
reg = <0 0x0c800000 0 0x800000>; |
| 1733 |
reg-names = "membase"; |
| 1734 |
memory-region = <&pil_wlan_mem>; |
| 1735 |
interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>, |
| 1736 |
<GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>, |
| 1737 |
<GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>, |
| 1738 |
<GIC_SPI 361 IRQ_TYPE_LEVEL_HIGH>, |
| 1739 |
<GIC_SPI 362 IRQ_TYPE_LEVEL_HIGH>, |
| 1740 |
<GIC_SPI 363 IRQ_TYPE_LEVEL_HIGH>, |
| 1741 |
<GIC_SPI 364 IRQ_TYPE_LEVEL_HIGH>, |
| 1742 |
<GIC_SPI 365 IRQ_TYPE_LEVEL_HIGH>, |
| 1743 |
<GIC_SPI 366 IRQ_TYPE_LEVEL_HIGH>, |
| 1744 |
<GIC_SPI 367 IRQ_TYPE_LEVEL_HIGH>, |
| 1745 |
<GIC_SPI 368 IRQ_TYPE_LEVEL_HIGH>, |
| 1746 |
<GIC_SPI 369 IRQ_TYPE_LEVEL_HIGH>; |
| 1747 |
iommus = <&apps_smmu 0x80 0x1>; |
| 1748 |
qcom,msa-fixed-perm; |
| 1749 |
status = "disabled"; |
| 1750 |
}; |
| 1751 |
|
| 1752 |
intc: interrupt-controller@f200000 { |
| 1753 |
compatible = "arm,gic-v3"; |
| 1754 |
reg = <0x0 0x0f200000 0x0 0x10000>, /* GICD */ |
| 1755 |
<0x0 0x0f240000 0x0 0x100000>; /* GICR * 8 */ |
| 1756 |
interrupts = <GIC_PPI 8 IRQ_TYPE_LEVEL_HIGH>; |
| 1757 |
#redistributor-regions = <1>; |
| 1758 |
#interrupt-cells = <3>; |
| 1759 |
redistributor-stride = <0 0x20000>; |
| 1760 |
interrupt-controller; |
| 1761 |
}; |
| 1762 |
|
| 1763 |
timer@f420000 { |
| 1764 |
compatible = "arm,armv7-timer-mem"; |
| 1765 |
reg = <0 0x0f420000 0 0x1000>; |
| 1766 |
ranges = <0 0 0 0x20000000>; |
| 1767 |
#address-cells = <1>; |
| 1768 |
#size-cells = <1>; |
| 1769 |
|
| 1770 |
frame@f421000 { |
| 1771 |
reg = <0x0f421000 0x1000>, <0x0f422000 0x1000>; |
| 1772 |
interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, |
| 1773 |
<GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; |
| 1774 |
frame-number = <0>; |
| 1775 |
}; |
| 1776 |
|
| 1777 |
frame@f423000 { |
| 1778 |
reg = <0x0f243000 0x1000>; |
| 1779 |
interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; |
| 1780 |
frame-number = <1>; |
| 1781 |
status = "disabled"; |
| 1782 |
}; |
| 1783 |
|
| 1784 |
frame@f425000 { |
| 1785 |
reg = <0x0f425000 0x1000>; |
| 1786 |
interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; |
| 1787 |
frame-number = <2>; |
| 1788 |
status = "disabled"; |
| 1789 |
}; |
| 1790 |
|
| 1791 |
frame@f427000 { |
| 1792 |
reg = <0x0f427000 0x1000>; |
| 1793 |
interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; |
| 1794 |
frame-number = <3>; |
| 1795 |
status = "disabled"; |
| 1796 |
}; |
| 1797 |
|
| 1798 |
frame@f429000 { |
| 1799 |
reg = <0x0f429000 0x1000>; |
| 1800 |
interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; |
| 1801 |
frame-number = <4>; |
| 1802 |
status = "disabled"; |
| 1803 |
}; |
| 1804 |
|
| 1805 |
frame@f42b000 { |
| 1806 |
reg = <0x0f42b000 0x1000>; |
| 1807 |
interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; |
| 1808 |
frame-number = <5>; |
| 1809 |
status = "disabled"; |
| 1810 |
}; |
| 1811 |
|
| 1812 |
frame@f42d000 { |
| 1813 |
reg = <0x0f42d000 0x1000>; |
| 1814 |
interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; |
| 1815 |
frame-number = <6>; |
| 1816 |
status = "disabled"; |
| 1817 |
}; |
| 1818 |
}; |
| 1819 |
|
| 1820 |
cpucp_l3: interconnect@fd90000 { |
| 1821 |
compatible = "qcom,sm6375-cpucp-l3", "qcom,epss-l3"; |
| 1822 |
reg = <0 0x0fd90000 0 0x1000>; |
| 1823 |
|
| 1824 |
clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>, <&gcc GPLL0>; |
| 1825 |
clock-names = "xo", "alternate"; |
| 1826 |
#interconnect-cells = <1>; |
| 1827 |
}; |
| 1828 |
|
| 1829 |
cpufreq_hw: cpufreq@fd91000 { |
| 1830 |
compatible = "qcom,sm6375-cpufreq-epss", "qcom,cpufreq-epss"; |
| 1831 |
reg = <0 0x0fd91000 0 0x1000>, <0 0x0fd92000 0 0x1000>; |
| 1832 |
reg-names = "freq-domain0", "freq-domain1"; |
| 1833 |
|
| 1834 |
clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>, <&gcc GPLL0>; |
| 1835 |
clock-names = "xo", "alternate"; |
| 1836 |
interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>, |
| 1837 |
<GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; |
| 1838 |
interrupt-names = "dcvsh-irq-0", "dcvsh-irq-1"; |
| 1839 |
#freq-domain-cells = <1>; |
| 1840 |
#clock-cells = <1>; |
| 1841 |
}; |
| 1842 |
}; |
| 1843 |
|
| 1844 |
thermal-zones { |
| 1845 |
mapss0-thermal { |
| 1846 |
thermal-sensors = <&tsens0 0>; |
| 1847 |
|
| 1848 |
trips { |
| 1849 |
mapss0_alert0: trip-point0 { |
| 1850 |
temperature = <90000>; |
| 1851 |
hysteresis = <2000>; |
| 1852 |
type = "passive"; |
| 1853 |
}; |
| 1854 |
|
| 1855 |
mapss0_alert1: trip-point1 { |
| 1856 |
temperature = <95000>; |
| 1857 |
hysteresis = <2000>; |
| 1858 |
type = "passive"; |
| 1859 |
}; |
| 1860 |
|
| 1861 |
mapss0_crit: mapss-crit { |
| 1862 |
temperature = <110000>; |
| 1863 |
hysteresis = <1000>; |
| 1864 |
type = "critical"; |
| 1865 |
}; |
| 1866 |
}; |
| 1867 |
}; |
| 1868 |
|
| 1869 |
cpu0-thermal { |
| 1870 |
thermal-sensors = <&tsens0 1>; |
| 1871 |
|
| 1872 |
trips { |
| 1873 |
cpu0_alert0: trip-point0 { |
| 1874 |
temperature = <90000>; |
| 1875 |
hysteresis = <2000>; |
| 1876 |
type = "passive"; |
| 1877 |
}; |
| 1878 |
|
| 1879 |
cpu0_alert1: trip-point1 { |
| 1880 |
temperature = <95000>; |
| 1881 |
hysteresis = <2000>; |
| 1882 |
type = "passive"; |
| 1883 |
}; |
| 1884 |
|
| 1885 |
cpu0_crit: cpu-crit { |
| 1886 |
temperature = <110000>; |
| 1887 |
hysteresis = <1000>; |
| 1888 |
type = "critical"; |
| 1889 |
}; |
| 1890 |
}; |
| 1891 |
}; |
| 1892 |
|
| 1893 |
cpu1-thermal { |
| 1894 |
thermal-sensors = <&tsens0 2>; |
| 1895 |
|
| 1896 |
trips { |
| 1897 |
cpu1_alert0: trip-point0 { |
| 1898 |
temperature = <90000>; |
| 1899 |
hysteresis = <2000>; |
| 1900 |
type = "passive"; |
| 1901 |
}; |
| 1902 |
|
| 1903 |
cpu1_alert1: trip-point1 { |
| 1904 |
temperature = <95000>; |
| 1905 |
hysteresis = <2000>; |
| 1906 |
type = "passive"; |
| 1907 |
}; |
| 1908 |
|
| 1909 |
cpu1_crit: cpu-crit { |
| 1910 |
temperature = <110000>; |
| 1911 |
hysteresis = <1000>; |
| 1912 |
type = "critical"; |
| 1913 |
}; |
| 1914 |
}; |
| 1915 |
}; |
| 1916 |
|
| 1917 |
cpu2-thermal { |
| 1918 |
thermal-sensors = <&tsens0 3>; |
| 1919 |
|
| 1920 |
trips { |
| 1921 |
cpu2_alert0: trip-point0 { |
| 1922 |
temperature = <90000>; |
| 1923 |
hysteresis = <2000>; |
| 1924 |
type = "passive"; |
| 1925 |
}; |
| 1926 |
|
| 1927 |
cpu2_alert1: trip-point1 { |
| 1928 |
temperature = <95000>; |
| 1929 |
hysteresis = <2000>; |
| 1930 |
type = "passive"; |
| 1931 |
}; |
| 1932 |
|
| 1933 |
cpu2_crit: cpu-crit { |
| 1934 |
temperature = <110000>; |
| 1935 |
hysteresis = <1000>; |
| 1936 |
type = "critical"; |
| 1937 |
}; |
| 1938 |
}; |
| 1939 |
}; |
| 1940 |
|
| 1941 |
cpu3-thermal { |
| 1942 |
thermal-sensors = <&tsens0 4>; |
| 1943 |
|
| 1944 |
trips { |
| 1945 |
cpu3_alert0: trip-point0 { |
| 1946 |
temperature = <90000>; |
| 1947 |
hysteresis = <2000>; |
| 1948 |
type = "passive"; |
| 1949 |
}; |
| 1950 |
|
| 1951 |
cpu3_alert1: trip-point1 { |
| 1952 |
temperature = <95000>; |
| 1953 |
hysteresis = <2000>; |
| 1954 |
type = "passive"; |
| 1955 |
}; |
| 1956 |
|
| 1957 |
cpu3_crit: cpu-crit { |
| 1958 |
temperature = <110000>; |
| 1959 |
hysteresis = <1000>; |
| 1960 |
type = "critical"; |
| 1961 |
}; |
| 1962 |
}; |
| 1963 |
}; |
| 1964 |
|
| 1965 |
cpu4-thermal { |
| 1966 |
thermal-sensors = <&tsens0 5>; |
| 1967 |
|
| 1968 |
trips { |
| 1969 |
cpu4_alert0: trip-point0 { |
| 1970 |
temperature = <90000>; |
| 1971 |
hysteresis = <2000>; |
| 1972 |
type = "passive"; |
| 1973 |
}; |
| 1974 |
|
| 1975 |
cpu4_alert1: trip-point1 { |
| 1976 |
temperature = <95000>; |
| 1977 |
hysteresis = <2000>; |
| 1978 |
type = "passive"; |
| 1979 |
}; |
| 1980 |
|
| 1981 |
cpu4_crit: cpu-crit { |
| 1982 |
temperature = <110000>; |
| 1983 |
hysteresis = <1000>; |
| 1984 |
type = "critical"; |
| 1985 |
}; |
| 1986 |
}; |
| 1987 |
}; |
| 1988 |
|
| 1989 |
cpu5-thermal { |
| 1990 |
thermal-sensors = <&tsens0 6>; |
| 1991 |
|
| 1992 |
trips { |
| 1993 |
cpu5_alert0: trip-point0 { |
| 1994 |
temperature = <90000>; |
| 1995 |
hysteresis = <2000>; |
| 1996 |
type = "passive"; |
| 1997 |
}; |
| 1998 |
|
| 1999 |
cpu5_alert1: trip-point1 { |
| 2000 |
temperature = <95000>; |
| 2001 |
hysteresis = <2000>; |
| 2002 |
type = "passive"; |
| 2003 |
}; |
| 2004 |
|
| 2005 |
cpu5_crit: cpu-crit { |
| 2006 |
temperature = <110000>; |
| 2007 |
hysteresis = <1000>; |
| 2008 |
type = "critical"; |
| 2009 |
}; |
| 2010 |
}; |
| 2011 |
}; |
| 2012 |
|
| 2013 |
cluster0-thermal { |
| 2014 |
thermal-sensors = <&tsens0 7>; |
| 2015 |
|
| 2016 |
trips { |
| 2017 |
cluster0_alert0: trip-point0 { |
| 2018 |
temperature = <90000>; |
| 2019 |
hysteresis = <2000>; |
| 2020 |
type = "passive"; |
| 2021 |
}; |
| 2022 |
|
| 2023 |
cluster0_alert1: trip-point1 { |
| 2024 |
temperature = <95000>; |
| 2025 |
hysteresis = <2000>; |
| 2026 |
type = "passive"; |
| 2027 |
}; |
| 2028 |
|
| 2029 |
cluster0_crit: cpu-crit { |
| 2030 |
temperature = <110000>; |
| 2031 |
hysteresis = <1000>; |
| 2032 |
type = "critical"; |
| 2033 |
}; |
| 2034 |
}; |
| 2035 |
}; |
| 2036 |
|
| 2037 |
cluster1-thermal { |
| 2038 |
thermal-sensors = <&tsens0 8>; |
| 2039 |
|
| 2040 |
trips { |
| 2041 |
cluster1_alert0: trip-point0 { |
| 2042 |
temperature = <90000>; |
| 2043 |
hysteresis = <2000>; |
| 2044 |
type = "passive"; |
| 2045 |
}; |
| 2046 |
|
| 2047 |
cluster1_alert1: trip-point1 { |
| 2048 |
temperature = <95000>; |
| 2049 |
hysteresis = <2000>; |
| 2050 |
type = "passive"; |
| 2051 |
}; |
| 2052 |
|
| 2053 |
cluster1_crit: cpu-crit { |
| 2054 |
temperature = <110000>; |
| 2055 |
hysteresis = <1000>; |
| 2056 |
type = "critical"; |
| 2057 |
}; |
| 2058 |
}; |
| 2059 |
}; |
| 2060 |
|
| 2061 |
cpu6-thermal { |
| 2062 |
thermal-sensors = <&tsens0 9>; |
| 2063 |
|
| 2064 |
trips { |
| 2065 |
cpu6_alert0: trip-point0 { |
| 2066 |
temperature = <90000>; |
| 2067 |
hysteresis = <2000>; |
| 2068 |
type = "passive"; |
| 2069 |
}; |
| 2070 |
|
| 2071 |
cpu6_alert1: trip-point1 { |
| 2072 |
temperature = <95000>; |
| 2073 |
hysteresis = <2000>; |
| 2074 |
type = "passive"; |
| 2075 |
}; |
| 2076 |
|
| 2077 |
cpu6_crit: cpu-crit { |
| 2078 |
temperature = <110000>; |
| 2079 |
hysteresis = <1000>; |
| 2080 |
type = "critical"; |
| 2081 |
}; |
| 2082 |
}; |
| 2083 |
}; |
| 2084 |
|
| 2085 |
cpu7-thermal { |
| 2086 |
thermal-sensors = <&tsens0 10>; |
| 2087 |
|
| 2088 |
trips { |
| 2089 |
cpu7_alert0: trip-point0 { |
| 2090 |
temperature = <90000>; |
| 2091 |
hysteresis = <2000>; |
| 2092 |
type = "passive"; |
| 2093 |
}; |
| 2094 |
|
| 2095 |
cpu7_alert1: trip-point1 { |
| 2096 |
temperature = <95000>; |
| 2097 |
hysteresis = <2000>; |
| 2098 |
type = "passive"; |
| 2099 |
}; |
| 2100 |
|
| 2101 |
cpu7_crit: cpu-crit { |
| 2102 |
temperature = <110000>; |
| 2103 |
hysteresis = <1000>; |
| 2104 |
type = "critical"; |
| 2105 |
}; |
| 2106 |
}; |
| 2107 |
}; |
| 2108 |
|
| 2109 |
cpu-unk0-thermal { |
| 2110 |
thermal-sensors = <&tsens0 11>; |
| 2111 |
|
| 2112 |
trips { |
| 2113 |
cpu_unk0_alert0: trip-point0 { |
| 2114 |
temperature = <90000>; |
| 2115 |
hysteresis = <2000>; |
| 2116 |
type = "passive"; |
| 2117 |
}; |
| 2118 |
|
| 2119 |
cpu_unk0_alert1: trip-point1 { |
| 2120 |
temperature = <95000>; |
| 2121 |
hysteresis = <2000>; |
| 2122 |
type = "passive"; |
| 2123 |
}; |
| 2124 |
|
| 2125 |
cpu_unk0_crit: cpu-crit { |
| 2126 |
temperature = <110000>; |
| 2127 |
hysteresis = <1000>; |
| 2128 |
type = "critical"; |
| 2129 |
}; |
| 2130 |
}; |
| 2131 |
}; |
| 2132 |
|
| 2133 |
cpu-unk1-thermal { |
| 2134 |
thermal-sensors = <&tsens0 12>; |
| 2135 |
|
| 2136 |
trips { |
| 2137 |
cpu_unk1_alert0: trip-point0 { |
| 2138 |
temperature = <90000>; |
| 2139 |
hysteresis = <2000>; |
| 2140 |
type = "passive"; |
| 2141 |
}; |
| 2142 |
|
| 2143 |
cpu_unk1_alert1: trip-point1 { |
| 2144 |
temperature = <95000>; |
| 2145 |
hysteresis = <2000>; |
| 2146 |
type = "passive"; |
| 2147 |
}; |
| 2148 |
|
| 2149 |
cpu_unk1_crit: cpu-crit { |
| 2150 |
temperature = <110000>; |
| 2151 |
hysteresis = <1000>; |
| 2152 |
type = "critical"; |
| 2153 |
}; |
| 2154 |
}; |
| 2155 |
}; |
| 2156 |
|
| 2157 |
gpuss0-thermal { |
| 2158 |
thermal-sensors = <&tsens0 13>; |
| 2159 |
|
| 2160 |
trips { |
| 2161 |
gpuss0_alert0: trip-point0 { |
| 2162 |
temperature = <90000>; |
| 2163 |
hysteresis = <2000>; |
| 2164 |
type = "passive"; |
| 2165 |
}; |
| 2166 |
|
| 2167 |
gpuss0_alert1: trip-point1 { |
| 2168 |
temperature = <95000>; |
| 2169 |
hysteresis = <2000>; |
| 2170 |
type = "passive"; |
| 2171 |
}; |
| 2172 |
|
| 2173 |
gpuss0_crit: gpu-crit { |
| 2174 |
temperature = <110000>; |
| 2175 |
hysteresis = <1000>; |
| 2176 |
type = "critical"; |
| 2177 |
}; |
| 2178 |
}; |
| 2179 |
}; |
| 2180 |
|
| 2181 |
gpuss1-thermal { |
| 2182 |
thermal-sensors = <&tsens0 14>; |
| 2183 |
|
| 2184 |
trips { |
| 2185 |
gpuss1_alert0: trip-point0 { |
| 2186 |
temperature = <90000>; |
| 2187 |
hysteresis = <2000>; |
| 2188 |
type = "passive"; |
| 2189 |
}; |
| 2190 |
|
| 2191 |
gpuss1_alert1: trip-point1 { |
| 2192 |
temperature = <95000>; |
| 2193 |
hysteresis = <2000>; |
| 2194 |
type = "passive"; |
| 2195 |
}; |
| 2196 |
|
| 2197 |
gpuss1_crit: gpu-crit { |
| 2198 |
temperature = <110000>; |
| 2199 |
hysteresis = <1000>; |
| 2200 |
type = "critical"; |
| 2201 |
}; |
| 2202 |
}; |
| 2203 |
}; |
| 2204 |
|
| 2205 |
mapss1-thermal { |
| 2206 |
thermal-sensors = <&tsens1 0>; |
| 2207 |
|
| 2208 |
trips { |
| 2209 |
mapss1_alert0: trip-point0 { |
| 2210 |
temperature = <90000>; |
| 2211 |
hysteresis = <2000>; |
| 2212 |
type = "passive"; |
| 2213 |
}; |
| 2214 |
|
| 2215 |
mapss1_alert1: trip-point1 { |
| 2216 |
temperature = <95000>; |
| 2217 |
hysteresis = <2000>; |
| 2218 |
type = "passive"; |
| 2219 |
}; |
| 2220 |
|
| 2221 |
mapss1_crit: mapss-crit { |
| 2222 |
temperature = <110000>; |
| 2223 |
hysteresis = <1000>; |
| 2224 |
type = "critical"; |
| 2225 |
}; |
| 2226 |
}; |
| 2227 |
}; |
| 2228 |
|
| 2229 |
cwlan-thermal { |
| 2230 |
thermal-sensors = <&tsens1 1>; |
| 2231 |
|
| 2232 |
trips { |
| 2233 |
cwlan_alert0: trip-point0 { |
| 2234 |
temperature = <90000>; |
| 2235 |
hysteresis = <2000>; |
| 2236 |
type = "passive"; |
| 2237 |
}; |
| 2238 |
|
| 2239 |
cwlan_alert1: trip-point1 { |
| 2240 |
temperature = <95000>; |
| 2241 |
hysteresis = <2000>; |
| 2242 |
type = "passive"; |
| 2243 |
}; |
| 2244 |
|
| 2245 |
cwlan_crit: cwlan-crit { |
| 2246 |
temperature = <110000>; |
| 2247 |
hysteresis = <1000>; |
| 2248 |
type = "critical"; |
| 2249 |
}; |
| 2250 |
}; |
| 2251 |
}; |
| 2252 |
|
| 2253 |
audio-thermal { |
| 2254 |
thermal-sensors = <&tsens1 2>; |
| 2255 |
|
| 2256 |
trips { |
| 2257 |
audio_alert0: trip-point0 { |
| 2258 |
temperature = <90000>; |
| 2259 |
hysteresis = <2000>; |
| 2260 |
type = "passive"; |
| 2261 |
}; |
| 2262 |
|
| 2263 |
audio_alert1: trip-point1 { |
| 2264 |
temperature = <95000>; |
| 2265 |
hysteresis = <2000>; |
| 2266 |
type = "passive"; |
| 2267 |
}; |
| 2268 |
|
| 2269 |
audio_crit: audio-crit { |
| 2270 |
temperature = <110000>; |
| 2271 |
hysteresis = <1000>; |
| 2272 |
type = "critical"; |
| 2273 |
}; |
| 2274 |
}; |
| 2275 |
}; |
| 2276 |
|
| 2277 |
ddr-thermal { |
| 2278 |
thermal-sensors = <&tsens1 3>; |
| 2279 |
|
| 2280 |
trips { |
| 2281 |
ddr_alert0: trip-point0 { |
| 2282 |
temperature = <90000>; |
| 2283 |
hysteresis = <2000>; |
| 2284 |
type = "passive"; |
| 2285 |
}; |
| 2286 |
|
| 2287 |
ddr_alert1: trip-point1 { |
| 2288 |
temperature = <95000>; |
| 2289 |
hysteresis = <2000>; |
| 2290 |
type = "passive"; |
| 2291 |
}; |
| 2292 |
|
| 2293 |
ddr_crit: ddr-crit { |
| 2294 |
temperature = <110000>; |
| 2295 |
hysteresis = <1000>; |
| 2296 |
type = "critical"; |
| 2297 |
}; |
| 2298 |
}; |
| 2299 |
}; |
| 2300 |
|
| 2301 |
q6hvx-thermal { |
| 2302 |
thermal-sensors = <&tsens1 4>; |
| 2303 |
|
| 2304 |
trips { |
| 2305 |
q6hvx_alert0: trip-point0 { |
| 2306 |
temperature = <90000>; |
| 2307 |
hysteresis = <2000>; |
| 2308 |
type = "passive"; |
| 2309 |
}; |
| 2310 |
|
| 2311 |
q6hvx_alert1: trip-point1 { |
| 2312 |
temperature = <95000>; |
| 2313 |
hysteresis = <2000>; |
| 2314 |
type = "passive"; |
| 2315 |
}; |
| 2316 |
|
| 2317 |
q6hvx_crit: q6hvx-crit { |
| 2318 |
temperature = <110000>; |
| 2319 |
hysteresis = <1000>; |
| 2320 |
type = "critical"; |
| 2321 |
}; |
| 2322 |
}; |
| 2323 |
}; |
| 2324 |
|
| 2325 |
camera-thermal { |
| 2326 |
thermal-sensors = <&tsens1 5>; |
| 2327 |
|
| 2328 |
trips { |
| 2329 |
camera_alert0: trip-point0 { |
| 2330 |
temperature = <90000>; |
| 2331 |
hysteresis = <2000>; |
| 2332 |
type = "passive"; |
| 2333 |
}; |
| 2334 |
|
| 2335 |
camera_alert1: trip-point1 { |
| 2336 |
temperature = <95000>; |
| 2337 |
hysteresis = <2000>; |
| 2338 |
type = "passive"; |
| 2339 |
}; |
| 2340 |
|
| 2341 |
camera_crit: camera-crit { |
| 2342 |
temperature = <110000>; |
| 2343 |
hysteresis = <1000>; |
| 2344 |
type = "critical"; |
| 2345 |
}; |
| 2346 |
}; |
| 2347 |
}; |
| 2348 |
|
| 2349 |
mdm-core0-thermal { |
| 2350 |
thermal-sensors = <&tsens1 6>; |
| 2351 |
|
| 2352 |
trips { |
| 2353 |
mdm_core0_alert0: trip-point0 { |
| 2354 |
temperature = <90000>; |
| 2355 |
hysteresis = <2000>; |
| 2356 |
type = "passive"; |
| 2357 |
}; |
| 2358 |
|
| 2359 |
mdm_core0_alert1: trip-point1 { |
| 2360 |
temperature = <95000>; |
| 2361 |
hysteresis = <2000>; |
| 2362 |
type = "passive"; |
| 2363 |
}; |
| 2364 |
|
| 2365 |
mdm_core0_crit: mdm-core0-crit { |
| 2366 |
temperature = <110000>; |
| 2367 |
hysteresis = <1000>; |
| 2368 |
type = "critical"; |
| 2369 |
}; |
| 2370 |
}; |
| 2371 |
}; |
| 2372 |
|
| 2373 |
mdm-core1-thermal { |
| 2374 |
thermal-sensors = <&tsens1 7>; |
| 2375 |
|
| 2376 |
trips { |
| 2377 |
mdm_core1_alert0: trip-point0 { |
| 2378 |
temperature = <90000>; |
| 2379 |
hysteresis = <2000>; |
| 2380 |
type = "passive"; |
| 2381 |
}; |
| 2382 |
|
| 2383 |
mdm_core1_alert1: trip-point1 { |
| 2384 |
temperature = <95000>; |
| 2385 |
hysteresis = <2000>; |
| 2386 |
type = "passive"; |
| 2387 |
}; |
| 2388 |
|
| 2389 |
mdm_core1_crit: mdm-core1-crit { |
| 2390 |
temperature = <110000>; |
| 2391 |
hysteresis = <1000>; |
| 2392 |
type = "critical"; |
| 2393 |
}; |
| 2394 |
}; |
| 2395 |
}; |
| 2396 |
|
| 2397 |
mdm-vec-thermal { |
| 2398 |
thermal-sensors = <&tsens1 8>; |
| 2399 |
|
| 2400 |
trips { |
| 2401 |
mdm_vec_alert0: trip-point0 { |
| 2402 |
temperature = <90000>; |
| 2403 |
hysteresis = <2000>; |
| 2404 |
type = "passive"; |
| 2405 |
}; |
| 2406 |
|
| 2407 |
mdm_vec_alert1: trip-point1 { |
| 2408 |
temperature = <95000>; |
| 2409 |
hysteresis = <2000>; |
| 2410 |
type = "passive"; |
| 2411 |
}; |
| 2412 |
|
| 2413 |
mdm_vec_crit: mdm-vec-crit { |
| 2414 |
temperature = <110000>; |
| 2415 |
hysteresis = <1000>; |
| 2416 |
type = "critical"; |
| 2417 |
}; |
| 2418 |
}; |
| 2419 |
}; |
| 2420 |
|
| 2421 |
msm-scl-thermal { |
| 2422 |
thermal-sensors = <&tsens1 9>; |
| 2423 |
|
| 2424 |
trips { |
| 2425 |
msm_scl_alert0: trip-point0 { |
| 2426 |
temperature = <90000>; |
| 2427 |
hysteresis = <2000>; |
| 2428 |
type = "passive"; |
| 2429 |
}; |
| 2430 |
|
| 2431 |
msm_scl_alert1: trip-point1 { |
| 2432 |
temperature = <95000>; |
| 2433 |
hysteresis = <2000>; |
| 2434 |
type = "passive"; |
| 2435 |
}; |
| 2436 |
|
| 2437 |
msm_scl_crit: msm-scl-crit { |
| 2438 |
temperature = <110000>; |
| 2439 |
hysteresis = <1000>; |
| 2440 |
type = "critical"; |
| 2441 |
}; |
| 2442 |
}; |
| 2443 |
}; |
| 2444 |
|
| 2445 |
video-thermal { |
| 2446 |
thermal-sensors = <&tsens1 10>; |
| 2447 |
|
| 2448 |
trips { |
| 2449 |
video_alert0: trip-point0 { |
| 2450 |
temperature = <90000>; |
| 2451 |
hysteresis = <2000>; |
| 2452 |
type = "passive"; |
| 2453 |
}; |
| 2454 |
|
| 2455 |
video_alert1: trip-point1 { |
| 2456 |
temperature = <95000>; |
| 2457 |
hysteresis = <2000>; |
| 2458 |
type = "passive"; |
| 2459 |
}; |
| 2460 |
|
| 2461 |
video_crit: video-crit { |
| 2462 |
temperature = <110000>; |
| 2463 |
hysteresis = <1000>; |
| 2464 |
type = "critical"; |
| 2465 |
}; |
| 2466 |
}; |
| 2467 |
}; |
| 2468 |
}; |
| 2469 |
|
| 2470 |
timer { |
| 2471 |
compatible = "arm,armv8-timer"; |
| 2472 |
interrupts = <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, |
| 2473 |
<GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, |
| 2474 |
<GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, |
| 2475 |
<GIC_PPI 0 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>; |
| 2476 |
}; |
| 2477 |
}; |