Debian Codegraph @

scripts/dtc/include-prefixes/arm64/qcom/sm6375-sony-xperia-murray-pdx225.dts

raw
1 // SPDX-License-Identifier: BSD-3-Clause
2 /*
3 * Copyright (c) 2022, Konrad Dybcio <[email protected]>
4 */
5
6 /dts-v1/;
7
8 /* PMK8350 is configured to use SID6 instead of 0 */
9 #define PMK8350_SID 6
10
11 #include <dt-bindings/gpio/gpio.h>
12 #include "sm6375.dtsi"
13 #include "pm6125.dtsi"
14 #include "pmk8350.dtsi"
15 #include "pmr735a.dtsi"
16
17 /* PM6125 PON is used and we can't have duplicate labels */
18 /delete-node/ &pmk8350_pon;
19
20 / {
21 model = "Sony Xperia 10 IV";
22 compatible = "sony,pdx225", "qcom,sm6375";
23 chassis-type = "handset";
24
25 chosen {
26 #address-cells = <2>;
27 #size-cells = <2>;
28 ranges;
29
30 framebuffer: framebuffer@85200000 {
31 compatible = "simple-framebuffer";
32 reg = <0 0x85200000 0 0xc00000>;
33
34 width = <1080>;
35 height = <2520>;
36 stride = <(1080 * 4)>;
37 format = "a8r8g8b8";
38 /*
39 * That's (going to be) a lot of clocks, but it's necessary due
40 * to unused clk cleanup & no panel driver yet
41 */
42 clocks = <&gcc GCC_DISP_AHB_CLK>,
43 <&gcc GCC_DISP_HF_AXI_CLK>,
44 <&gcc GCC_DISP_THROTTLE_CORE_CLK>,
45 <&gcc GCC_DISP_GPLL0_DIV_CLK_SRC>;
46 };
47 };
48
49 gpio-keys {
50 compatible = "gpio-keys";
51 label = "gpio-keys";
52
53 pinctrl-0 = <&vol_down_n>;
54 pinctrl-names = "default";
55
56 key-volume-down {
57 label = "Volume Down";
58 linux,code = <KEY_VOLUMEDOWN>;
59 gpios = <&pmr735a_gpios 1 GPIO_ACTIVE_LOW>;
60 debounce-interval = <15>;
61 linux,can-disable;
62 wakeup-source;
63 };
64 };
65
66 reserved-memory {
67 cont_splash_mem: memory@85200000 {
68 reg = <0 0x85200000 0 0xc00000>;
69 no-map;
70 };
71
72 ramoops@ffc40000 {
73 compatible = "ramoops";
74 reg = <0 0xffc40000 0 0xb0000>;
75 record-size = <0x10000>;
76 console-size = <0x60000>;
77 ftrace-size = <0x10000>;
78 pmsg-size = <0x20000>;
79 ecc-size = <16>;
80 };
81 };
82
83 touch_avdd: touch-avdd-regulator {
84 compatible = "regulator-fixed";
85 regulator-name = "touch_avdd";
86 gpio = <&tlmm 59 GPIO_ACTIVE_HIGH>;
87 pinctrl-names = "default";
88 pinctrl-0 = <&ts_avdd_default>;
89 enable-active-high;
90 };
91
92 vph_pwr: vph-pwr-regulator {
93 compatible = "regulator-fixed";
94 regulator-name = "vph_pwr";
95 regulator-min-microvolt = <3700000>;
96 regulator-max-microvolt = <3700000>;
97 regulator-always-on;
98 regulator-boot-on;
99 };
100 };
101
102 &sdc2_off_state {
103 sd-cd-pins {
104 pins = "gpio94";
105 function = "gpio";
106 drive-strength = <2>;
107 bias-disable;
108 };
109 };
110
111 &sdc2_on_state {
112 sd-cd-pins {
113 pins = "gpio94";
114 function = "gpio";
115 drive-strength = <2>;
116 bias-pull-up;
117 };
118 };
119
120 &sdhc_2 {
121 status = "okay";
122
123 vmmc-supply = <&pm6125_l22>;
124 vqmmc-supply = <&pm6125_l5>;
125
126 cd-gpios = <&tlmm 94 GPIO_ACTIVE_HIGH>;
127 };
128
129 &gpi_dma0 {
130 status = "okay";
131 };
132
133 &gpi_dma1 {
134 status = "okay";
135 };
136
137 &i2c8 {
138 clock-frequency = <400000>;
139 status = "okay";
140
141 touchscreen@48 {
142 compatible = "samsung,s6sy761";
143 reg = <0x48>;
144 interrupt-parent = <&tlmm>;
145 interrupts = <22 IRQ_TYPE_LEVEL_LOW>;
146
147 vdd-supply = <&pm6125_l13>;
148 avdd-supply = <&touch_avdd>;
149
150 pinctrl-names = "default";
151 pinctrl-0 = <&ts_int_default>;
152 };
153 };
154
155 &pmk8350_adc_tm {
156 status = "okay";
157 };
158
159 &pmk8350_rtc {
160 status = "okay";
161 };
162
163 &pmr735a_gpios {
164 vol_down_n: vol-down-n-state {
165 pins = "gpio1";
166 function = "normal";
167 power-source = <1>;
168 bias-pull-up;
169 input-enable;
170 };
171 };
172
173 &pon_pwrkey {
174 status = "okay";
175 };
176
177 &pon_resin {
178 linux,code = <KEY_VOLUMEUP>;
179 status = "okay";
180 };
181
182 &qupv3_id_0 {
183 status = "okay";
184 };
185
186 &qupv3_id_1 {
187 status = "okay";
188 };
189
190 &remoteproc_adsp {
191 firmware-name = "qcom/sm6375/Sony/murray/adsp.mbn";
192 status = "okay";
193 };
194
195 &remoteproc_cdsp {
196 firmware-name = "qcom/sm6375/Sony/murray/cdsp.mbn";
197 status = "okay";
198 };
199
200 &remoteproc_mss {
201 firmware-name = "qcom/sm6375/Sony/murray/modem.mbn";
202 status = "okay";
203 };
204
205 &rpm_requests {
206 regulators-0 {
207 compatible = "qcom,rpm-pm6125-regulators";
208
209 pm6125_s5: s5 {
210 regulator-min-microvolt = <382000>;
211 regulator-max-microvolt = <1120000>;
212 };
213
214 pm6125_s6: s6 {
215 regulator-min-microvolt = <320000>;
216 regulator-max-microvolt = <1374000>;
217 };
218
219 pm6125_s7: s7 {
220 regulator-min-microvolt = <1574000>;
221 regulator-max-microvolt = <2040000>;
222 };
223
224 /*
225 * S8 is VDD_GFX
226 * L1 is VDD_LPI_CX
227 */
228
229 pm6125_l2: l2 {
230 regulator-min-microvolt = <1170000>;
231 regulator-max-microvolt = <1304000>;
232 };
233
234 pm6125_l3: l3 {
235 regulator-min-microvolt = <1100000>;
236 regulator-max-microvolt = <1300000>;
237 };
238
239 pm6125_l4: l4 {
240 regulator-min-microvolt = <1100000>;
241 regulator-max-microvolt = <1300000>;
242 };
243
244 pm6125_l5: l5 {
245 regulator-min-microvolt = <1650000>;
246 regulator-max-microvolt = <2960000>;
247 regulator-allow-set-load;
248 };
249
250 pm6125_l6: l6 {
251 regulator-min-microvolt = <1080000>;
252 regulator-max-microvolt = <1304000>;
253 };
254
255 pm6125_l7: l7 {
256 regulator-min-microvolt = <880000>;
257 regulator-max-microvolt = <880000>;
258 };
259
260 pm6125_l8: l8 {
261 regulator-min-microvolt = <1100000>;
262 regulator-max-microvolt = <1304000>;
263 };
264
265 pm6125_l9: l9 {
266 regulator-min-microvolt = <1504000>;
267 regulator-max-microvolt = <2000000>;
268 };
269
270 pm6125_l10: l10 {
271 regulator-min-microvolt = <1620000>;
272 regulator-max-microvolt = <1980000>;
273 };
274
275 pm6125_l11: l11 {
276 regulator-min-microvolt = <1620000>;
277 regulator-max-microvolt = <1980000>;
278 };
279
280 pm6125_l12: l12 {
281 regulator-min-microvolt = <1620000>;
282 regulator-max-microvolt = <2000000>;
283 };
284
285 pm6125_l13: l13 {
286 regulator-min-microvolt = <1650000>;
287 regulator-max-microvolt = <1980000>;
288 };
289
290 pm6125_l14: l14 {
291 regulator-min-microvolt = <1700000>;
292 regulator-max-microvolt = <1900000>;
293 };
294
295 pm6125_l15: l15 {
296 regulator-min-microvolt = <1650000>;
297 regulator-max-microvolt = <3544000>;
298 };
299
300 pm6125_l16: l16 {
301 regulator-min-microvolt = <1620000>;
302 regulator-max-microvolt = <1980000>;
303 };
304
305 /* L17 is VDD_LPI_MX */
306
307 pm6125_l18: l18 {
308 regulator-min-microvolt = <830000>;
309 regulator-max-microvolt = <920000>;
310 };
311
312 pm6125_l19: l19 {
313 regulator-min-microvolt = <1624000>;
314 regulator-max-microvolt = <3304000>;
315 };
316
317 pm6125_l20: l20 {
318 regulator-min-microvolt = <1624000>;
319 regulator-max-microvolt = <3304000>;
320 };
321
322 pm6125_l21: l21 {
323 regulator-min-microvolt = <3000000>;
324 regulator-max-microvolt = <3312000>;
325 };
326
327 pm6125_l22: l22 {
328 regulator-min-microvolt = <2704000>;
329 regulator-max-microvolt = <2960000>;
330 regulator-allow-set-load;
331 };
332
333 pm6125_l23: l23 {
334 regulator-min-microvolt = <3000000>;
335 regulator-max-microvolt = <3312000>;
336 };
337
338 pm6125_l24: l24 {
339 regulator-min-microvolt = <2704000>;
340 regulator-max-microvolt = <3544000>;
341 };
342 };
343
344 regulators-1 {
345 compatible = "qcom,rpm-pmr735a-regulators";
346
347 /*
348 * S1 is VDD_MX
349 * S2 is VDD_CX
350 */
351
352 pmr735a_l1: l1 {
353 regulator-min-microvolt = <570000>;
354 regulator-max-microvolt = <650000>;
355 };
356
357 pmr735a_l2: l2 {
358 regulator-min-microvolt = <640000>;
359 regulator-max-microvolt = <640000>;
360 };
361
362 pmr735a_l3: l3 {
363 regulator-min-microvolt = <1000000>;
364 regulator-max-microvolt = <1200000>;
365 };
366
367 pmr735a_l4: l4 {
368 regulator-min-microvolt = <1504000>;
369 regulator-max-microvolt = <2000000>;
370 };
371
372 pmr735a_l5: l5 {
373 regulator-min-microvolt = <751000>;
374 regulator-max-microvolt = <824000>;
375 };
376
377 pmr735a_l6: l6 {
378 regulator-min-microvolt = <504000>;
379 regulator-max-microvolt = <868000>;
380 };
381
382 pmr735a_l7: l7 {
383 regulator-min-microvolt = <2700000>;
384 regulator-max-microvolt = <3544000>;
385 };
386 };
387 };
388
389 &sdc2_off_state {
390 sd-cd-pins {
391 pins = "gpio94";
392 function = "gpio";
393 drive-strength = <2>;
394 bias-disable;
395 };
396 };
397
398 &sdc2_on_state {
399 sd-cd-pins {
400 pins = "gpio94";
401 function = "gpio";
402 drive-strength = <2>;
403 bias-pull-up;
404 };
405 };
406
407 &sdhc_2 {
408 status = "okay";
409
410 vmmc-supply = <&pm6125_l22>;
411 vqmmc-supply = <&pm6125_l5>;
412
413 cd-gpios = <&tlmm 94 GPIO_ACTIVE_HIGH>;
414 };
415
416 &tlmm {
417 gpio-reserved-ranges = <13 4>;
418
419 ts_int_default: ts-int-default-state {
420 pins = "gpio22";
421 function = "gpio";
422 drive-strength = <8>;
423 bias-pull-up;
424 };
425
426 ts_avdd_default: ts-avdd-default-state {
427 pins = "gpio59";
428 function = "gpio";
429 drive-strength = <8>;
430 output-low;
431 };
432 };
433
434 &usb_1 {
435 status = "okay";
436 };
437
438 &usb_1_dwc3 {
439 dr_mode = "peripheral";
440 };
441
442 &usb_1_hsphy {
443 vdda-pll-supply = <&pm6125_l7>;
444 vdda18-supply = <&pm6125_l10>;
445 vdda33-supply = <&pmr735a_l7>;
446 status = "okay";
447 };
448
449 &wifi {
450 vdd-0.8-cx-mx-supply = <&pmr735a_l2>;
451 vdd-1.8-xo-supply = <&pm6125_l16>;
452 vdd-1.3-rfa-supply = <&pm6125_l2>;
453 vdd-3.3-ch0-supply = <&pm6125_l23>;
454 vdd-3.3-ch1-supply = <&pm6125_l21>;
455 status = "okay";
456 };
457
458 &xo_board_clk {
459 clock-frequency = <19200000>;
460 };