| 1 |
// SPDX-License-Identifier: BSD-3-Clause |
| 2 |
/* |
| 3 |
* Copyright (c) 2021, Martin Botka <[email protected]> |
| 4 |
*/ |
| 5 |
|
| 6 |
#include <dt-bindings/clock/qcom,dispcc-sm6125.h> |
| 7 |
#include <dt-bindings/clock/qcom,dsi-phy-28nm.h> |
| 8 |
#include <dt-bindings/clock/qcom,gcc-sm6125.h> |
| 9 |
#include <dt-bindings/clock/qcom,rpmcc.h> |
| 10 |
#include <dt-bindings/dma/qcom-gpi.h> |
| 11 |
#include <dt-bindings/gpio/gpio.h> |
| 12 |
#include <dt-bindings/interrupt-controller/arm-gic.h> |
| 13 |
#include <dt-bindings/power/qcom-rpmpd.h> |
| 14 |
|
| 15 |
/ { |
| 16 |
interrupt-parent = <&intc>; |
| 17 |
#address-cells = <2>; |
| 18 |
#size-cells = <2>; |
| 19 |
|
| 20 |
chosen { }; |
| 21 |
|
| 22 |
clocks { |
| 23 |
xo_board: xo-board { |
| 24 |
compatible = "fixed-clock"; |
| 25 |
#clock-cells = <0>; |
| 26 |
clock-frequency = <19200000>; |
| 27 |
}; |
| 28 |
|
| 29 |
sleep_clk: sleep-clk { |
| 30 |
compatible = "fixed-clock"; |
| 31 |
#clock-cells = <0>; |
| 32 |
clock-frequency = <32764>; |
| 33 |
clock-output-names = "sleep_clk"; |
| 34 |
}; |
| 35 |
}; |
| 36 |
|
| 37 |
cpus { |
| 38 |
#address-cells = <2>; |
| 39 |
#size-cells = <0>; |
| 40 |
|
| 41 |
cpu0: cpu@0 { |
| 42 |
device_type = "cpu"; |
| 43 |
compatible = "qcom,kryo260"; |
| 44 |
reg = <0x0 0x0>; |
| 45 |
enable-method = "psci"; |
| 46 |
capacity-dmips-mhz = <1024>; |
| 47 |
next-level-cache = <&l2_0>; |
| 48 |
l2_0: l2-cache { |
| 49 |
compatible = "cache"; |
| 50 |
cache-level = <2>; |
| 51 |
cache-unified; |
| 52 |
}; |
| 53 |
}; |
| 54 |
|
| 55 |
cpu1: cpu@1 { |
| 56 |
device_type = "cpu"; |
| 57 |
compatible = "qcom,kryo260"; |
| 58 |
reg = <0x0 0x1>; |
| 59 |
enable-method = "psci"; |
| 60 |
capacity-dmips-mhz = <1024>; |
| 61 |
next-level-cache = <&l2_0>; |
| 62 |
}; |
| 63 |
|
| 64 |
cpu2: cpu@2 { |
| 65 |
device_type = "cpu"; |
| 66 |
compatible = "qcom,kryo260"; |
| 67 |
reg = <0x0 0x2>; |
| 68 |
enable-method = "psci"; |
| 69 |
capacity-dmips-mhz = <1024>; |
| 70 |
next-level-cache = <&l2_0>; |
| 71 |
}; |
| 72 |
|
| 73 |
cpu3: cpu@3 { |
| 74 |
device_type = "cpu"; |
| 75 |
compatible = "qcom,kryo260"; |
| 76 |
reg = <0x0 0x3>; |
| 77 |
enable-method = "psci"; |
| 78 |
capacity-dmips-mhz = <1024>; |
| 79 |
next-level-cache = <&l2_0>; |
| 80 |
}; |
| 81 |
|
| 82 |
cpu4: cpu@100 { |
| 83 |
device_type = "cpu"; |
| 84 |
compatible = "qcom,kryo260"; |
| 85 |
reg = <0x0 0x100>; |
| 86 |
enable-method = "psci"; |
| 87 |
capacity-dmips-mhz = <1638>; |
| 88 |
next-level-cache = <&l2_1>; |
| 89 |
l2_1: l2-cache { |
| 90 |
compatible = "cache"; |
| 91 |
cache-level = <2>; |
| 92 |
cache-unified; |
| 93 |
}; |
| 94 |
}; |
| 95 |
|
| 96 |
cpu5: cpu@101 { |
| 97 |
device_type = "cpu"; |
| 98 |
compatible = "qcom,kryo260"; |
| 99 |
reg = <0x0 0x101>; |
| 100 |
enable-method = "psci"; |
| 101 |
capacity-dmips-mhz = <1638>; |
| 102 |
next-level-cache = <&l2_1>; |
| 103 |
}; |
| 104 |
|
| 105 |
cpu6: cpu@102 { |
| 106 |
device_type = "cpu"; |
| 107 |
compatible = "qcom,kryo260"; |
| 108 |
reg = <0x0 0x102>; |
| 109 |
enable-method = "psci"; |
| 110 |
capacity-dmips-mhz = <1638>; |
| 111 |
next-level-cache = <&l2_1>; |
| 112 |
}; |
| 113 |
|
| 114 |
cpu7: cpu@103 { |
| 115 |
device_type = "cpu"; |
| 116 |
compatible = "qcom,kryo260"; |
| 117 |
reg = <0x0 0x103>; |
| 118 |
enable-method = "psci"; |
| 119 |
capacity-dmips-mhz = <1638>; |
| 120 |
next-level-cache = <&l2_1>; |
| 121 |
}; |
| 122 |
|
| 123 |
cpu-map { |
| 124 |
cluster0 { |
| 125 |
core0 { |
| 126 |
cpu = <&cpu0>; |
| 127 |
}; |
| 128 |
|
| 129 |
core1 { |
| 130 |
cpu = <&cpu1>; |
| 131 |
}; |
| 132 |
|
| 133 |
core2 { |
| 134 |
cpu = <&cpu2>; |
| 135 |
}; |
| 136 |
|
| 137 |
core3 { |
| 138 |
cpu = <&cpu3>; |
| 139 |
}; |
| 140 |
}; |
| 141 |
|
| 142 |
cluster1 { |
| 143 |
core0 { |
| 144 |
cpu = <&cpu4>; |
| 145 |
}; |
| 146 |
|
| 147 |
core1 { |
| 148 |
cpu = <&cpu5>; |
| 149 |
}; |
| 150 |
|
| 151 |
core2 { |
| 152 |
cpu = <&cpu6>; |
| 153 |
}; |
| 154 |
|
| 155 |
core3 { |
| 156 |
cpu = <&cpu7>; |
| 157 |
}; |
| 158 |
}; |
| 159 |
}; |
| 160 |
}; |
| 161 |
|
| 162 |
firmware { |
| 163 |
scm: scm { |
| 164 |
compatible = "qcom,scm-sm6125", "qcom,scm"; |
| 165 |
#reset-cells = <1>; |
| 166 |
}; |
| 167 |
}; |
| 168 |
|
| 169 |
memory@40000000 { |
| 170 |
/* We expect the bootloader to fill in the size */ |
| 171 |
reg = <0x0 0x40000000 0x0 0x0>; |
| 172 |
device_type = "memory"; |
| 173 |
}; |
| 174 |
|
| 175 |
pmu { |
| 176 |
compatible = "arm,armv8-pmuv3"; |
| 177 |
interrupts = <GIC_PPI 6 IRQ_TYPE_LEVEL_HIGH>; |
| 178 |
}; |
| 179 |
|
| 180 |
psci { |
| 181 |
compatible = "arm,psci-1.0"; |
| 182 |
method = "smc"; |
| 183 |
}; |
| 184 |
|
| 185 |
rpm: remoteproc { |
| 186 |
compatible = "qcom,sm6125-rpm-proc", "qcom,rpm-proc"; |
| 187 |
|
| 188 |
glink-edge { |
| 189 |
compatible = "qcom,glink-rpm"; |
| 190 |
|
| 191 |
interrupts = <GIC_SPI 194 IRQ_TYPE_EDGE_RISING>; |
| 192 |
qcom,rpm-msg-ram = <&rpm_msg_ram>; |
| 193 |
mboxes = <&apcs_glb 0>; |
| 194 |
|
| 195 |
rpm_requests: rpm-requests { |
| 196 |
compatible = "qcom,rpm-sm6125", "qcom,glink-smd-rpm"; |
| 197 |
qcom,glink-channels = "rpm_requests"; |
| 198 |
|
| 199 |
rpmcc: clock-controller { |
| 200 |
compatible = "qcom,rpmcc-sm6125", "qcom,rpmcc"; |
| 201 |
#clock-cells = <1>; |
| 202 |
clocks = <&xo_board>; |
| 203 |
clock-names = "xo"; |
| 204 |
}; |
| 205 |
|
| 206 |
rpmpd: power-controller { |
| 207 |
compatible = "qcom,sm6125-rpmpd"; |
| 208 |
#power-domain-cells = <1>; |
| 209 |
operating-points-v2 = <&rpmpd_opp_table>; |
| 210 |
|
| 211 |
rpmpd_opp_table: opp-table { |
| 212 |
compatible = "operating-points-v2"; |
| 213 |
|
| 214 |
rpmpd_opp_ret: opp1 { |
| 215 |
opp-level = <RPM_SMD_LEVEL_RETENTION>; |
| 216 |
}; |
| 217 |
|
| 218 |
rpmpd_opp_ret_plus: opp2 { |
| 219 |
opp-level = <RPM_SMD_LEVEL_RETENTION_PLUS>; |
| 220 |
}; |
| 221 |
|
| 222 |
rpmpd_opp_min_svs: opp3 { |
| 223 |
opp-level = <RPM_SMD_LEVEL_MIN_SVS>; |
| 224 |
}; |
| 225 |
|
| 226 |
rpmpd_opp_low_svs: opp4 { |
| 227 |
opp-level = <RPM_SMD_LEVEL_LOW_SVS>; |
| 228 |
}; |
| 229 |
|
| 230 |
rpmpd_opp_svs: opp5 { |
| 231 |
opp-level = <RPM_SMD_LEVEL_SVS>; |
| 232 |
}; |
| 233 |
|
| 234 |
rpmpd_opp_svs_plus: opp6 { |
| 235 |
opp-level = <RPM_SMD_LEVEL_SVS_PLUS>; |
| 236 |
}; |
| 237 |
|
| 238 |
rpmpd_opp_nom: opp7 { |
| 239 |
opp-level = <RPM_SMD_LEVEL_NOM>; |
| 240 |
}; |
| 241 |
|
| 242 |
rpmpd_opp_nom_plus: opp8 { |
| 243 |
opp-level = <RPM_SMD_LEVEL_NOM_PLUS>; |
| 244 |
}; |
| 245 |
|
| 246 |
rpmpd_opp_turbo: opp9 { |
| 247 |
opp-level = <RPM_SMD_LEVEL_TURBO>; |
| 248 |
}; |
| 249 |
|
| 250 |
rpmpd_opp_turbo_no_cpr: opp10 { |
| 251 |
opp-level = <RPM_SMD_LEVEL_TURBO_NO_CPR>; |
| 252 |
}; |
| 253 |
}; |
| 254 |
}; |
| 255 |
}; |
| 256 |
}; |
| 257 |
}; |
| 258 |
|
| 259 |
reserved_memory: reserved-memory { |
| 260 |
#address-cells = <2>; |
| 261 |
#size-cells = <2>; |
| 262 |
ranges; |
| 263 |
|
| 264 |
hyp_mem: memory@45700000 { |
| 265 |
reg = <0x0 0x45700000 0x0 0x600000>; |
| 266 |
no-map; |
| 267 |
}; |
| 268 |
|
| 269 |
xbl_aop_mem: memory@45e00000 { |
| 270 |
reg = <0x0 0x45e00000 0x0 0x140000>; |
| 271 |
no-map; |
| 272 |
}; |
| 273 |
|
| 274 |
sec_apps_mem: memory@45fff000 { |
| 275 |
reg = <0x0 0x45fff000 0x0 0x1000>; |
| 276 |
no-map; |
| 277 |
}; |
| 278 |
|
| 279 |
smem_mem: memory@46000000 { |
| 280 |
reg = <0x0 0x46000000 0x0 0x200000>; |
| 281 |
no-map; |
| 282 |
}; |
| 283 |
|
| 284 |
reserved_mem1: memory@46200000 { |
| 285 |
reg = <0x0 0x46200000 0x0 0x2d00000>; |
| 286 |
no-map; |
| 287 |
}; |
| 288 |
|
| 289 |
camera_mem: memory@4ab00000 { |
| 290 |
reg = <0x0 0x4ab00000 0x0 0x500000>; |
| 291 |
no-map; |
| 292 |
}; |
| 293 |
|
| 294 |
modem_mem: memory@4b000000 { |
| 295 |
reg = <0x0 0x4b000000 0x0 0x7e00000>; |
| 296 |
no-map; |
| 297 |
}; |
| 298 |
|
| 299 |
venus_mem: memory@52e00000 { |
| 300 |
reg = <0x0 0x52e00000 0x0 0x500000>; |
| 301 |
no-map; |
| 302 |
}; |
| 303 |
|
| 304 |
wlan_msa_mem: memory@53300000 { |
| 305 |
reg = <0x0 0x53300000 0x0 0x200000>; |
| 306 |
no-map; |
| 307 |
}; |
| 308 |
|
| 309 |
cdsp_mem: memory@53500000 { |
| 310 |
reg = <0x0 0x53500000 0x0 0x1e00000>; |
| 311 |
no-map; |
| 312 |
}; |
| 313 |
|
| 314 |
adsp_pil_mem: memory@55300000 { |
| 315 |
reg = <0x0 0x55300000 0x0 0x1e00000>; |
| 316 |
no-map; |
| 317 |
}; |
| 318 |
|
| 319 |
ipa_fw_mem: memory@57100000 { |
| 320 |
reg = <0x0 0x57100000 0x0 0x10000>; |
| 321 |
no-map; |
| 322 |
}; |
| 323 |
|
| 324 |
ipa_gsi_mem: memory@57110000 { |
| 325 |
reg = <0x0 0x57110000 0x0 0x5000>; |
| 326 |
no-map; |
| 327 |
}; |
| 328 |
|
| 329 |
gpu_mem: memory@57115000 { |
| 330 |
reg = <0x0 0x57115000 0x0 0x2000>; |
| 331 |
no-map; |
| 332 |
}; |
| 333 |
|
| 334 |
cont_splash_mem: memory@5c000000 { |
| 335 |
reg = <0x0 0x5c000000 0x0 0x00f00000>; |
| 336 |
no-map; |
| 337 |
}; |
| 338 |
|
| 339 |
dfps_data_mem: memory@5cf00000 { |
| 340 |
reg = <0x0 0x5cf00000 0x0 0x0100000>; |
| 341 |
no-map; |
| 342 |
}; |
| 343 |
|
| 344 |
cdsp_sec_mem: memory@5f800000 { |
| 345 |
reg = <0x0 0x5f800000 0x0 0x1e00000>; |
| 346 |
no-map; |
| 347 |
}; |
| 348 |
|
| 349 |
qseecom_mem: memory@5e400000 { |
| 350 |
reg = <0x0 0x5e400000 0x0 0x1400000>; |
| 351 |
no-map; |
| 352 |
}; |
| 353 |
|
| 354 |
sdsp_mem: memory@f3000000 { |
| 355 |
reg = <0x0 0xf3000000 0x0 0x400000>; |
| 356 |
no-map; |
| 357 |
}; |
| 358 |
|
| 359 |
adsp_mem: memory@f3400000 { |
| 360 |
reg = <0x0 0xf3400000 0x0 0x800000>; |
| 361 |
no-map; |
| 362 |
}; |
| 363 |
|
| 364 |
qseecom_ta_mem: memory@13fc00000 { |
| 365 |
reg = <0x1 0x3fc00000 0x0 0x400000>; |
| 366 |
no-map; |
| 367 |
}; |
| 368 |
}; |
| 369 |
|
| 370 |
smem: smem { |
| 371 |
compatible = "qcom,smem"; |
| 372 |
memory-region = <&smem_mem>; |
| 373 |
hwlocks = <&tcsr_mutex 3>; |
| 374 |
}; |
| 375 |
|
| 376 |
soc@0 { |
| 377 |
#address-cells = <1>; |
| 378 |
#size-cells = <1>; |
| 379 |
ranges = <0x00 0x00 0x00 0xffffffff>; |
| 380 |
compatible = "simple-bus"; |
| 381 |
|
| 382 |
tcsr_mutex: hwlock@340000 { |
| 383 |
compatible = "qcom,tcsr-mutex"; |
| 384 |
reg = <0x00340000 0x20000>; |
| 385 |
#hwlock-cells = <1>; |
| 386 |
}; |
| 387 |
|
| 388 |
tlmm: pinctrl@500000 { |
| 389 |
compatible = "qcom,sm6125-tlmm"; |
| 390 |
reg = <0x00500000 0x400000>, |
| 391 |
<0x00900000 0x400000>, |
| 392 |
<0x00d00000 0x400000>; |
| 393 |
reg-names = "west", "south", "east"; |
| 394 |
interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>; |
| 395 |
gpio-controller; |
| 396 |
gpio-ranges = <&tlmm 0 0 134>; |
| 397 |
#gpio-cells = <2>; |
| 398 |
interrupt-controller; |
| 399 |
#interrupt-cells = <2>; |
| 400 |
|
| 401 |
sdc2_off_state: sdc2-off-state { |
| 402 |
clk-pins { |
| 403 |
pins = "sdc2_clk"; |
| 404 |
drive-strength = <2>; |
| 405 |
bias-disable; |
| 406 |
}; |
| 407 |
|
| 408 |
cmd-pins { |
| 409 |
pins = "sdc2_cmd"; |
| 410 |
drive-strength = <2>; |
| 411 |
bias-pull-up; |
| 412 |
}; |
| 413 |
|
| 414 |
data-pins { |
| 415 |
pins = "sdc2_data"; |
| 416 |
drive-strength = <2>; |
| 417 |
bias-pull-up; |
| 418 |
}; |
| 419 |
}; |
| 420 |
|
| 421 |
sdc2_on_state: sdc2-on-state { |
| 422 |
clk-pins { |
| 423 |
pins = "sdc2_clk"; |
| 424 |
drive-strength = <16>; |
| 425 |
bias-disable; |
| 426 |
}; |
| 427 |
|
| 428 |
cmd-pins { |
| 429 |
pins = "sdc2_cmd"; |
| 430 |
drive-strength = <10>; |
| 431 |
bias-pull-up; |
| 432 |
}; |
| 433 |
|
| 434 |
data-pins { |
| 435 |
pins = "sdc2_data"; |
| 436 |
drive-strength = <10>; |
| 437 |
bias-pull-up; |
| 438 |
}; |
| 439 |
}; |
| 440 |
|
| 441 |
qup_i2c0_default: qup-i2c0-default-state { |
| 442 |
pins = "gpio0", "gpio1"; |
| 443 |
function = "qup00"; |
| 444 |
drive-strength = <2>; |
| 445 |
bias-disable; |
| 446 |
}; |
| 447 |
|
| 448 |
qup_i2c0_sleep: qup-i2c0-sleep-state { |
| 449 |
pins = "gpio0", "gpio1"; |
| 450 |
function = "gpio"; |
| 451 |
drive-strength = <2>; |
| 452 |
bias-pull-up; |
| 453 |
}; |
| 454 |
|
| 455 |
qup_i2c1_default: qup-i2c1-default-state { |
| 456 |
pins = "gpio4", "gpio5"; |
| 457 |
function = "qup01"; |
| 458 |
drive-strength = <2>; |
| 459 |
bias-disable; |
| 460 |
}; |
| 461 |
|
| 462 |
qup_i2c1_sleep: qup-i2c1-sleep-state { |
| 463 |
pins = "gpio4", "gpio5"; |
| 464 |
function = "gpio"; |
| 465 |
drive-strength = <2>; |
| 466 |
bias-pull-up; |
| 467 |
}; |
| 468 |
|
| 469 |
qup_i2c2_default: qup-i2c2-default-state { |
| 470 |
pins = "gpio6", "gpio7"; |
| 471 |
function = "qup02"; |
| 472 |
drive-strength = <2>; |
| 473 |
bias-disable; |
| 474 |
}; |
| 475 |
|
| 476 |
qup_i2c2_sleep: qup-i2c2-sleep-state { |
| 477 |
pins = "gpio6", "gpio7"; |
| 478 |
function = "gpio"; |
| 479 |
drive-strength = <2>; |
| 480 |
bias-pull-up; |
| 481 |
}; |
| 482 |
|
| 483 |
qup_i2c3_default: qup-i2c3-default-state { |
| 484 |
pins = "gpio14", "gpio15"; |
| 485 |
function = "qup03"; |
| 486 |
drive-strength = <2>; |
| 487 |
bias-disable; |
| 488 |
}; |
| 489 |
|
| 490 |
qup_i2c3_sleep: qup-i2c3-sleep-state { |
| 491 |
pins = "gpio14", "gpio15"; |
| 492 |
function = "gpio"; |
| 493 |
drive-strength = <2>; |
| 494 |
bias-pull-up; |
| 495 |
}; |
| 496 |
|
| 497 |
qup_i2c4_default: qup-i2c4-default-state { |
| 498 |
pins = "gpio16", "gpio17"; |
| 499 |
function = "qup04"; |
| 500 |
drive-strength = <2>; |
| 501 |
bias-disable; |
| 502 |
}; |
| 503 |
|
| 504 |
qup_i2c4_sleep: qup-i2c4-sleep-state { |
| 505 |
pins = "gpio16", "gpio17"; |
| 506 |
function = "gpio"; |
| 507 |
drive-strength = <2>; |
| 508 |
bias-pull-up; |
| 509 |
}; |
| 510 |
|
| 511 |
qup_i2c5_default: qup-i2c5-default-state { |
| 512 |
pins = "gpio22", "gpio23"; |
| 513 |
function = "qup10"; |
| 514 |
drive-strength = <2>; |
| 515 |
bias-disable; |
| 516 |
}; |
| 517 |
|
| 518 |
qup_i2c5_sleep: qup-i2c5-sleep-state { |
| 519 |
pins = "gpio22", "gpio23"; |
| 520 |
function = "gpio"; |
| 521 |
drive-strength = <2>; |
| 522 |
bias-pull-up; |
| 523 |
}; |
| 524 |
|
| 525 |
qup_i2c6_default: qup-i2c6-default-state { |
| 526 |
pins = "gpio30", "gpio31"; |
| 527 |
function = "qup11"; |
| 528 |
drive-strength = <2>; |
| 529 |
bias-disable; |
| 530 |
}; |
| 531 |
|
| 532 |
qup_i2c6_sleep: qup-i2c6-sleep-state { |
| 533 |
pins = "gpio30", "gpio31"; |
| 534 |
function = "gpio"; |
| 535 |
drive-strength = <2>; |
| 536 |
bias-pull-up; |
| 537 |
}; |
| 538 |
|
| 539 |
qup_i2c7_default: qup-i2c7-default-state { |
| 540 |
pins = "gpio28", "gpio29"; |
| 541 |
function = "qup12"; |
| 542 |
drive-strength = <2>; |
| 543 |
bias-disable; |
| 544 |
}; |
| 545 |
|
| 546 |
qup_i2c7_sleep: qup-i2c7-sleep-state { |
| 547 |
pins = "gpio28", "gpio29"; |
| 548 |
function = "gpio"; |
| 549 |
drive-strength = <2>; |
| 550 |
bias-pull-up; |
| 551 |
}; |
| 552 |
|
| 553 |
qup_i2c8_default: qup-i2c8-default-state { |
| 554 |
pins = "gpio18", "gpio19"; |
| 555 |
function = "qup13"; |
| 556 |
drive-strength = <2>; |
| 557 |
bias-disable; |
| 558 |
}; |
| 559 |
|
| 560 |
qup_i2c8_sleep: qup-i2c8-sleep-state { |
| 561 |
pins = "gpio18", "gpio19"; |
| 562 |
function = "gpio"; |
| 563 |
drive-strength = <2>; |
| 564 |
bias-pull-up; |
| 565 |
}; |
| 566 |
|
| 567 |
qup_i2c9_default: qup-i2c9-default-state { |
| 568 |
pins = "gpio10", "gpio11"; |
| 569 |
function = "qup14"; |
| 570 |
drive-strength = <2>; |
| 571 |
bias-disable; |
| 572 |
}; |
| 573 |
|
| 574 |
qup_i2c9_sleep: qup-i2c9-sleep-state { |
| 575 |
pins = "gpio10", "gpio11"; |
| 576 |
function = "gpio"; |
| 577 |
drive-strength = <2>; |
| 578 |
bias-pull-up; |
| 579 |
}; |
| 580 |
|
| 581 |
qup_spi0_default: qup-spi0-default-state { |
| 582 |
pins = "gpio0", "gpio1", "gpio2", "gpio3"; |
| 583 |
function = "qup00"; |
| 584 |
drive-strength = <6>; |
| 585 |
bias-disable; |
| 586 |
}; |
| 587 |
|
| 588 |
qup_spi0_sleep: qup-spi0-sleep-state { |
| 589 |
pins = "gpio0", "gpio1", "gpio2", "gpio3"; |
| 590 |
function = "gpio"; |
| 591 |
drive-strength = <6>; |
| 592 |
bias-disable; |
| 593 |
}; |
| 594 |
|
| 595 |
qup_spi2_default: qup-spi2-default-state { |
| 596 |
pins = "gpio6", "gpio7", "gpio8", "gpio9"; |
| 597 |
function = "qup02"; |
| 598 |
drive-strength = <6>; |
| 599 |
bias-disable; |
| 600 |
}; |
| 601 |
|
| 602 |
qup_spi2_sleep: qup-spi2-sleep-state { |
| 603 |
pins = "gpio6", "gpio7", "gpio8", "gpio9"; |
| 604 |
function = "gpio"; |
| 605 |
drive-strength = <6>; |
| 606 |
bias-disable; |
| 607 |
}; |
| 608 |
|
| 609 |
qup_spi5_default: qup-spi5-default-state { |
| 610 |
pins = "gpio22", "gpio23", "gpio24", "gpio25"; |
| 611 |
function = "qup10"; |
| 612 |
drive-strength = <6>; |
| 613 |
bias-disable; |
| 614 |
}; |
| 615 |
|
| 616 |
qup_spi5_sleep: qup-spi5-sleep-state { |
| 617 |
pins = "gpio22", "gpio23", "gpio24", "gpio25"; |
| 618 |
function = "gpio"; |
| 619 |
drive-strength = <6>; |
| 620 |
bias-disable; |
| 621 |
}; |
| 622 |
|
| 623 |
qup_spi6_default: qup-spi6-default-state { |
| 624 |
pins = "gpio30", "gpio31", "gpio32", "gpio33"; |
| 625 |
function = "qup11"; |
| 626 |
drive-strength = <6>; |
| 627 |
bias-disable; |
| 628 |
}; |
| 629 |
|
| 630 |
qup_spi6_sleep: qup-spi6-sleep-state { |
| 631 |
pins = "gpio30", "gpio31", "gpio32", "gpio33"; |
| 632 |
function = "gpio"; |
| 633 |
drive-strength = <6>; |
| 634 |
bias-disable; |
| 635 |
}; |
| 636 |
|
| 637 |
qup_spi8_default: qup-spi8-default-state { |
| 638 |
pins = "gpio18", "gpio19", "gpio20", "gpio21"; |
| 639 |
function = "qup13"; |
| 640 |
drive-strength = <6>; |
| 641 |
bias-disable; |
| 642 |
}; |
| 643 |
|
| 644 |
qup_spi8_sleep: qup-spi8-sleep-state { |
| 645 |
pins = "gpio18", "gpio19", "gpio20", "gpio21"; |
| 646 |
function = "gpio"; |
| 647 |
drive-strength = <6>; |
| 648 |
bias-disable; |
| 649 |
}; |
| 650 |
|
| 651 |
qup_spi9_default: qup-spi9-default-state { |
| 652 |
pins = "gpio10", "gpio11", "gpio12", "gpio13"; |
| 653 |
function = "qup14"; |
| 654 |
drive-strength = <6>; |
| 655 |
bias-disable; |
| 656 |
}; |
| 657 |
|
| 658 |
qup_spi9_sleep: qup-spi9-sleep-state { |
| 659 |
pins = "gpio10", "gpio11", "gpio12", "gpio13"; |
| 660 |
function = "gpio"; |
| 661 |
drive-strength = <6>; |
| 662 |
bias-disable; |
| 663 |
}; |
| 664 |
}; |
| 665 |
|
| 666 |
gcc: clock-controller@1400000 { |
| 667 |
compatible = "qcom,gcc-sm6125"; |
| 668 |
reg = <0x01400000 0x1f0000>; |
| 669 |
#clock-cells = <1>; |
| 670 |
#reset-cells = <1>; |
| 671 |
#power-domain-cells = <1>; |
| 672 |
clock-names = "bi_tcxo", "sleep_clk"; |
| 673 |
clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>, <&sleep_clk>; |
| 674 |
}; |
| 675 |
|
| 676 |
hsusb_phy1: phy@1613000 { |
| 677 |
compatible = "qcom,msm8996-qusb2-phy"; |
| 678 |
reg = <0x01613000 0x180>; |
| 679 |
#phy-cells = <0>; |
| 680 |
|
| 681 |
clocks = <&gcc GCC_AHB2PHY_USB_CLK>, |
| 682 |
<&rpmcc RPM_SMD_XO_CLK_SRC>; |
| 683 |
clock-names = "cfg_ahb", "ref"; |
| 684 |
|
| 685 |
resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>; |
| 686 |
status = "disabled"; |
| 687 |
}; |
| 688 |
|
| 689 |
spmi_bus: spmi@1c40000 { |
| 690 |
compatible = "qcom,spmi-pmic-arb"; |
| 691 |
reg = <0x01c40000 0x1100>, |
| 692 |
<0x01e00000 0x2000000>, |
| 693 |
<0x03e00000 0x100000>, |
| 694 |
<0x03f00000 0xa0000>, |
| 695 |
<0x01c0a000 0x26000>; |
| 696 |
reg-names = "core", "chnls", "obsrvr", "intr", "cnfg"; |
| 697 |
interrupt-names = "periph_irq"; |
| 698 |
interrupts = <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>; |
| 699 |
qcom,ee = <0>; |
| 700 |
qcom,channel = <0>; |
| 701 |
#address-cells = <2>; |
| 702 |
#size-cells = <0>; |
| 703 |
interrupt-controller; |
| 704 |
#interrupt-cells = <4>; |
| 705 |
}; |
| 706 |
|
| 707 |
rpm_msg_ram: sram@45f0000 { |
| 708 |
compatible = "qcom,rpm-msg-ram"; |
| 709 |
reg = <0x045f0000 0x7000>; |
| 710 |
}; |
| 711 |
|
| 712 |
sdhc_1: mmc@4744000 { |
| 713 |
compatible = "qcom,sm6125-sdhci", "qcom,sdhci-msm-v5"; |
| 714 |
reg = <0x04744000 0x1000>, <0x04745000 0x1000>; |
| 715 |
reg-names = "hc", "cqhci"; |
| 716 |
|
| 717 |
interrupts = <GIC_SPI 348 IRQ_TYPE_LEVEL_HIGH>, |
| 718 |
<GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>; |
| 719 |
interrupt-names = "hc_irq", "pwr_irq"; |
| 720 |
|
| 721 |
clocks = <&gcc GCC_SDCC1_AHB_CLK>, |
| 722 |
<&gcc GCC_SDCC1_APPS_CLK>, |
| 723 |
<&rpmcc RPM_SMD_XO_CLK_SRC>; |
| 724 |
clock-names = "iface", "core", "xo"; |
| 725 |
iommus = <&apps_smmu 0x160 0x0>; |
| 726 |
|
| 727 |
power-domains = <&rpmpd RPMPD_VDDCX>; |
| 728 |
|
| 729 |
qcom,dll-config = <0x000f642c>; |
| 730 |
qcom,ddr-config = <0x80040873>; |
| 731 |
|
| 732 |
bus-width = <8>; |
| 733 |
non-removable; |
| 734 |
supports-cqe; |
| 735 |
|
| 736 |
status = "disabled"; |
| 737 |
}; |
| 738 |
|
| 739 |
sdhc_2: mmc@4784000 { |
| 740 |
compatible = "qcom,sm6125-sdhci", "qcom,sdhci-msm-v5"; |
| 741 |
reg = <0x04784000 0x1000>; |
| 742 |
reg-names = "hc"; |
| 743 |
|
| 744 |
interrupts = <GIC_SPI 350 IRQ_TYPE_LEVEL_HIGH>, |
| 745 |
<GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>; |
| 746 |
interrupt-names = "hc_irq", "pwr_irq"; |
| 747 |
|
| 748 |
clocks = <&gcc GCC_SDCC2_AHB_CLK>, |
| 749 |
<&gcc GCC_SDCC2_APPS_CLK>, |
| 750 |
<&rpmcc RPM_SMD_XO_CLK_SRC>; |
| 751 |
clock-names = "iface", "core", "xo"; |
| 752 |
iommus = <&apps_smmu 0x180 0x0>; |
| 753 |
|
| 754 |
pinctrl-0 = <&sdc2_on_state>; |
| 755 |
pinctrl-1 = <&sdc2_off_state>; |
| 756 |
pinctrl-names = "default", "sleep"; |
| 757 |
|
| 758 |
power-domains = <&rpmpd RPMPD_VDDCX>; |
| 759 |
|
| 760 |
qcom,dll-config = <0x0007642c>; |
| 761 |
qcom,ddr-config = <0x80040873>; |
| 762 |
|
| 763 |
bus-width = <4>; |
| 764 |
status = "disabled"; |
| 765 |
}; |
| 766 |
|
| 767 |
ufs_mem_hc: ufshc@4804000 { |
| 768 |
compatible = "qcom,sm6125-ufshc", "qcom,ufshc", "jedec,ufs-2.0"; |
| 769 |
reg = <0x04804000 0x3000>, <0x04810000 0x8000>; |
| 770 |
reg-names = "std", "ice"; |
| 771 |
interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>; |
| 772 |
|
| 773 |
clocks = <&gcc GCC_UFS_PHY_AXI_CLK>, |
| 774 |
<&gcc GCC_SYS_NOC_UFS_PHY_AXI_CLK>, |
| 775 |
<&gcc GCC_UFS_PHY_AHB_CLK>, |
| 776 |
<&gcc GCC_UFS_PHY_UNIPRO_CORE_CLK>, |
| 777 |
<&rpmcc RPM_SMD_XO_CLK_SRC>, |
| 778 |
<&gcc GCC_UFS_PHY_TX_SYMBOL_0_CLK>, |
| 779 |
<&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>, |
| 780 |
<&gcc GCC_UFS_PHY_ICE_CORE_CLK>; |
| 781 |
clock-names = "core_clk", |
| 782 |
"bus_aggr_clk", |
| 783 |
"iface_clk", |
| 784 |
"core_clk_unipro", |
| 785 |
"ref_clk", |
| 786 |
"tx_lane0_sync_clk", |
| 787 |
"rx_lane0_sync_clk", |
| 788 |
"ice_core_clk"; |
| 789 |
freq-table-hz = <50000000 240000000>, |
| 790 |
<0 0>, |
| 791 |
<0 0>, |
| 792 |
<37500000 150000000>, |
| 793 |
<0 0>, |
| 794 |
<0 0>, |
| 795 |
<0 0>, |
| 796 |
<75000000 300000000>; |
| 797 |
|
| 798 |
resets = <&gcc GCC_UFS_PHY_BCR>; |
| 799 |
reset-names = "rst"; |
| 800 |
#reset-cells = <1>; |
| 801 |
|
| 802 |
phys = <&ufs_mem_phy>; |
| 803 |
phy-names = "ufsphy"; |
| 804 |
|
| 805 |
lanes-per-direction = <1>; |
| 806 |
|
| 807 |
iommus = <&apps_smmu 0x200 0x0>; |
| 808 |
|
| 809 |
status = "disabled"; |
| 810 |
}; |
| 811 |
|
| 812 |
ufs_mem_phy: phy@4807000 { |
| 813 |
compatible = "qcom,sm6125-qmp-ufs-phy"; |
| 814 |
reg = <0x04807000 0xdb8>; |
| 815 |
|
| 816 |
clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>, |
| 817 |
<&gcc GCC_UFS_PHY_PHY_AUX_CLK>, |
| 818 |
<&gcc GCC_UFS_MEM_CLKREF_CLK>; |
| 819 |
clock-names = "ref", |
| 820 |
"ref_aux", |
| 821 |
"qref"; |
| 822 |
|
| 823 |
resets = <&ufs_mem_hc 0>; |
| 824 |
reset-names = "ufsphy"; |
| 825 |
|
| 826 |
power-domains = <&gcc UFS_PHY_GDSC>; |
| 827 |
|
| 828 |
#phy-cells = <0>; |
| 829 |
|
| 830 |
status = "disabled"; |
| 831 |
}; |
| 832 |
|
| 833 |
gpi_dma0: dma-controller@4a00000 { |
| 834 |
compatible = "qcom,sm6125-gpi-dma", "qcom,sdm845-gpi-dma"; |
| 835 |
reg = <0x04a00000 0x60000>; |
| 836 |
interrupts = <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>, |
| 837 |
<GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>, |
| 838 |
<GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>, |
| 839 |
<GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>, |
| 840 |
<GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>, |
| 841 |
<GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>, |
| 842 |
<GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>, |
| 843 |
<GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>; |
| 844 |
dma-channels = <8>; |
| 845 |
dma-channel-mask = <0x1f>; |
| 846 |
iommus = <&apps_smmu 0x136 0x0>; |
| 847 |
#dma-cells = <3>; |
| 848 |
status = "disabled"; |
| 849 |
}; |
| 850 |
|
| 851 |
qupv3_id_0: geniqup@4ac0000 { |
| 852 |
compatible = "qcom,geni-se-qup"; |
| 853 |
reg = <0x04ac0000 0x2000>; |
| 854 |
clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>, |
| 855 |
<&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>; |
| 856 |
clock-names = "m-ahb", "s-ahb"; |
| 857 |
iommus = <&apps_smmu 0x123 0x0>; |
| 858 |
#address-cells = <1>; |
| 859 |
#size-cells = <1>; |
| 860 |
ranges; |
| 861 |
status = "disabled"; |
| 862 |
|
| 863 |
i2c0: i2c@4a80000 { |
| 864 |
compatible = "qcom,geni-i2c"; |
| 865 |
reg = <0x04a80000 0x4000>; |
| 866 |
clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>; |
| 867 |
clock-names = "se"; |
| 868 |
interrupts = <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>; |
| 869 |
pinctrl-0 = <&qup_i2c0_default>; |
| 870 |
pinctrl-1 = <&qup_i2c0_sleep>; |
| 871 |
pinctrl-names = "default", "sleep"; |
| 872 |
dmas = <&gpi_dma0 0 0 QCOM_GPI_I2C>, |
| 873 |
<&gpi_dma0 1 0 QCOM_GPI_I2C>; |
| 874 |
dma-names = "tx", "rx"; |
| 875 |
#address-cells = <1>; |
| 876 |
#size-cells = <0>; |
| 877 |
status = "disabled"; |
| 878 |
}; |
| 879 |
|
| 880 |
spi0: spi@4a80000 { |
| 881 |
compatible = "qcom,geni-spi"; |
| 882 |
reg = <0x04a80000 0x4000>; |
| 883 |
clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>; |
| 884 |
clock-names = "se"; |
| 885 |
interrupts = <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>; |
| 886 |
pinctrl-0 = <&qup_spi0_default>; |
| 887 |
pinctrl-1 = <&qup_spi0_sleep>; |
| 888 |
pinctrl-names = "default", "sleep"; |
| 889 |
dmas = <&gpi_dma0 0 0 QCOM_GPI_SPI>, |
| 890 |
<&gpi_dma0 1 0 QCOM_GPI_SPI>; |
| 891 |
dma-names = "tx", "rx"; |
| 892 |
#address-cells = <1>; |
| 893 |
#size-cells = <0>; |
| 894 |
status = "disabled"; |
| 895 |
}; |
| 896 |
|
| 897 |
i2c1: i2c@4a84000 { |
| 898 |
compatible = "qcom,geni-i2c"; |
| 899 |
reg = <0x04a84000 0x4000>; |
| 900 |
clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>; |
| 901 |
clock-names = "se"; |
| 902 |
interrupts = <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>; |
| 903 |
pinctrl-0 = <&qup_i2c1_default>; |
| 904 |
pinctrl-1 = <&qup_i2c1_sleep>; |
| 905 |
pinctrl-names = "default", "sleep"; |
| 906 |
dmas = <&gpi_dma0 0 1 QCOM_GPI_I2C>, |
| 907 |
<&gpi_dma0 1 1 QCOM_GPI_I2C>; |
| 908 |
dma-names = "tx", "rx"; |
| 909 |
#address-cells = <1>; |
| 910 |
#size-cells = <0>; |
| 911 |
status = "disabled"; |
| 912 |
}; |
| 913 |
|
| 914 |
i2c2: i2c@4a88000 { |
| 915 |
compatible = "qcom,geni-i2c"; |
| 916 |
reg = <0x04a88000 0x4000>; |
| 917 |
clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>; |
| 918 |
clock-names = "se"; |
| 919 |
interrupts = <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>; |
| 920 |
pinctrl-0 = <&qup_i2c2_default>; |
| 921 |
pinctrl-1 = <&qup_i2c2_sleep>; |
| 922 |
pinctrl-names = "default", "sleep"; |
| 923 |
dmas = <&gpi_dma0 0 2 QCOM_GPI_I2C>, |
| 924 |
<&gpi_dma0 1 2 QCOM_GPI_I2C>; |
| 925 |
dma-names = "tx", "rx"; |
| 926 |
#address-cells = <1>; |
| 927 |
#size-cells = <0>; |
| 928 |
status = "disabled"; |
| 929 |
}; |
| 930 |
|
| 931 |
spi2: spi@4a88000 { |
| 932 |
compatible = "qcom,geni-spi"; |
| 933 |
reg = <0x04a88000 0x4000>; |
| 934 |
clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>; |
| 935 |
clock-names = "se"; |
| 936 |
interrupts = <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>; |
| 937 |
pinctrl-0 = <&qup_spi2_default>; |
| 938 |
pinctrl-1 = <&qup_spi2_sleep>; |
| 939 |
pinctrl-names = "default", "sleep"; |
| 940 |
dmas = <&gpi_dma0 0 2 QCOM_GPI_SPI>, |
| 941 |
<&gpi_dma0 1 2 QCOM_GPI_SPI>; |
| 942 |
dma-names = "tx", "rx"; |
| 943 |
#address-cells = <1>; |
| 944 |
#size-cells = <0>; |
| 945 |
status = "disabled"; |
| 946 |
}; |
| 947 |
|
| 948 |
i2c3: i2c@4a8c000 { |
| 949 |
compatible = "qcom,geni-i2c"; |
| 950 |
reg = <0x04a8c000 0x4000>; |
| 951 |
clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>; |
| 952 |
clock-names = "se"; |
| 953 |
interrupts = <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>; |
| 954 |
pinctrl-0 = <&qup_i2c3_default>; |
| 955 |
pinctrl-1 = <&qup_i2c3_sleep>; |
| 956 |
pinctrl-names = "default", "sleep"; |
| 957 |
dmas = <&gpi_dma0 0 3 QCOM_GPI_I2C>, |
| 958 |
<&gpi_dma0 1 3 QCOM_GPI_I2C>; |
| 959 |
dma-names = "tx", "rx"; |
| 960 |
#address-cells = <1>; |
| 961 |
#size-cells = <0>; |
| 962 |
status = "disabled"; |
| 963 |
}; |
| 964 |
|
| 965 |
i2c4: i2c@4a90000 { |
| 966 |
compatible = "qcom,geni-i2c"; |
| 967 |
reg = <0x04a90000 0x4000>; |
| 968 |
clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>; |
| 969 |
clock-names = "se"; |
| 970 |
interrupts = <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>; |
| 971 |
pinctrl-0 = <&qup_i2c4_default>; |
| 972 |
pinctrl-1 = <&qup_i2c4_sleep>; |
| 973 |
pinctrl-names = "default", "sleep"; |
| 974 |
dmas = <&gpi_dma0 0 4 QCOM_GPI_I2C>, |
| 975 |
<&gpi_dma0 1 4 QCOM_GPI_I2C>; |
| 976 |
dma-names = "tx", "rx"; |
| 977 |
#address-cells = <1>; |
| 978 |
#size-cells = <0>; |
| 979 |
status = "disabled"; |
| 980 |
}; |
| 981 |
}; |
| 982 |
|
| 983 |
gpi_dma1: dma-controller@4c00000 { |
| 984 |
compatible = "qcom,sm6125-gpi-dma", "qcom,sdm845-gpi-dma"; |
| 985 |
reg = <0x04c00000 0x60000>; |
| 986 |
interrupts = <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>, |
| 987 |
<GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>, |
| 988 |
<GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>, |
| 989 |
<GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>, |
| 990 |
<GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>, |
| 991 |
<GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>, |
| 992 |
<GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>, |
| 993 |
<GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>; |
| 994 |
dma-channels = <8>; |
| 995 |
dma-channel-mask = <0x0f>; |
| 996 |
iommus = <&apps_smmu 0x156 0x0>; |
| 997 |
#dma-cells = <3>; |
| 998 |
status = "disabled"; |
| 999 |
}; |
| 1000 |
|
| 1001 |
qupv3_id_1: geniqup@4cc0000 { |
| 1002 |
compatible = "qcom,geni-se-qup"; |
| 1003 |
reg = <0x04cc0000 0x2000>; |
| 1004 |
clocks = <&gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>, |
| 1005 |
<&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>; |
| 1006 |
clock-names = "m-ahb", "s-ahb"; |
| 1007 |
iommus = <&apps_smmu 0x143 0x0>; |
| 1008 |
#address-cells = <1>; |
| 1009 |
#size-cells = <1>; |
| 1010 |
ranges; |
| 1011 |
status = "disabled"; |
| 1012 |
|
| 1013 |
i2c5: i2c@4c80000 { |
| 1014 |
compatible = "qcom,geni-i2c"; |
| 1015 |
reg = <0x04c80000 0x4000>; |
| 1016 |
clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>; |
| 1017 |
clock-names = "se"; |
| 1018 |
interrupts = <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>; |
| 1019 |
pinctrl-0 = <&qup_i2c5_default>; |
| 1020 |
pinctrl-1 = <&qup_i2c5_sleep>; |
| 1021 |
pinctrl-names = "default", "sleep"; |
| 1022 |
dmas = <&gpi_dma1 0 0 QCOM_GPI_I2C>, |
| 1023 |
<&gpi_dma1 1 0 QCOM_GPI_I2C>; |
| 1024 |
dma-names = "tx", "rx"; |
| 1025 |
#address-cells = <1>; |
| 1026 |
#size-cells = <0>; |
| 1027 |
status = "disabled"; |
| 1028 |
}; |
| 1029 |
|
| 1030 |
spi5: spi@4c80000 { |
| 1031 |
compatible = "qcom,geni-spi"; |
| 1032 |
reg = <0x04c80000 0x4000>; |
| 1033 |
clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>; |
| 1034 |
clock-names = "se"; |
| 1035 |
interrupts = <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>; |
| 1036 |
pinctrl-0 = <&qup_spi5_default>; |
| 1037 |
pinctrl-1 = <&qup_spi5_sleep>; |
| 1038 |
pinctrl-names = "default", "sleep"; |
| 1039 |
dmas = <&gpi_dma1 0 0 QCOM_GPI_SPI>, |
| 1040 |
<&gpi_dma1 1 0 QCOM_GPI_SPI>; |
| 1041 |
dma-names = "tx", "rx"; |
| 1042 |
#address-cells = <1>; |
| 1043 |
#size-cells = <0>; |
| 1044 |
status = "disabled"; |
| 1045 |
}; |
| 1046 |
|
| 1047 |
i2c6: i2c@4c84000 { |
| 1048 |
compatible = "qcom,geni-i2c"; |
| 1049 |
reg = <0x04c84000 0x4000>; |
| 1050 |
clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>; |
| 1051 |
clock-names = "se"; |
| 1052 |
interrupts = <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>; |
| 1053 |
pinctrl-0 = <&qup_i2c6_default>; |
| 1054 |
pinctrl-1 = <&qup_i2c6_sleep>; |
| 1055 |
pinctrl-names = "default", "sleep"; |
| 1056 |
dmas = <&gpi_dma1 0 1 QCOM_GPI_I2C>, |
| 1057 |
<&gpi_dma1 1 1 QCOM_GPI_I2C>; |
| 1058 |
dma-names = "tx", "rx"; |
| 1059 |
#address-cells = <1>; |
| 1060 |
#size-cells = <0>; |
| 1061 |
status = "disabled"; |
| 1062 |
}; |
| 1063 |
|
| 1064 |
spi6: spi@4c84000 { |
| 1065 |
compatible = "qcom,geni-spi"; |
| 1066 |
reg = <0x04c84000 0x4000>; |
| 1067 |
clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>; |
| 1068 |
clock-names = "se"; |
| 1069 |
interrupts = <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>; |
| 1070 |
pinctrl-0 = <&qup_spi6_default>; |
| 1071 |
pinctrl-1 = <&qup_spi6_sleep>; |
| 1072 |
pinctrl-names = "default", "sleep"; |
| 1073 |
dmas = <&gpi_dma1 0 1 QCOM_GPI_SPI>, |
| 1074 |
<&gpi_dma1 1 1 QCOM_GPI_SPI>; |
| 1075 |
dma-names = "tx", "rx"; |
| 1076 |
#address-cells = <1>; |
| 1077 |
#size-cells = <0>; |
| 1078 |
status = "disabled"; |
| 1079 |
}; |
| 1080 |
|
| 1081 |
i2c7: i2c@4c88000 { |
| 1082 |
compatible = "qcom,geni-i2c"; |
| 1083 |
reg = <0x04c88000 0x4000>; |
| 1084 |
clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>; |
| 1085 |
clock-names = "se"; |
| 1086 |
interrupts = <GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH>; |
| 1087 |
pinctrl-0 = <&qup_i2c7_default>; |
| 1088 |
pinctrl-1 = <&qup_i2c7_sleep>; |
| 1089 |
pinctrl-names = "default", "sleep"; |
| 1090 |
dmas = <&gpi_dma1 0 2 QCOM_GPI_I2C>, |
| 1091 |
<&gpi_dma1 1 2 QCOM_GPI_I2C>; |
| 1092 |
dma-names = "tx", "rx"; |
| 1093 |
#address-cells = <1>; |
| 1094 |
#size-cells = <0>; |
| 1095 |
status = "disabled"; |
| 1096 |
}; |
| 1097 |
|
| 1098 |
i2c8: i2c@4c8c000 { |
| 1099 |
compatible = "qcom,geni-i2c"; |
| 1100 |
reg = <0x04c8c000 0x4000>; |
| 1101 |
clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>; |
| 1102 |
clock-names = "se"; |
| 1103 |
interrupts = <GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH>; |
| 1104 |
pinctrl-0 = <&qup_i2c8_default>; |
| 1105 |
pinctrl-1 = <&qup_i2c8_sleep>; |
| 1106 |
pinctrl-names = "default", "sleep"; |
| 1107 |
dmas = <&gpi_dma1 0 3 QCOM_GPI_I2C>, |
| 1108 |
<&gpi_dma1 1 3 QCOM_GPI_I2C>; |
| 1109 |
dma-names = "tx", "rx"; |
| 1110 |
#address-cells = <1>; |
| 1111 |
#size-cells = <0>; |
| 1112 |
status = "disabled"; |
| 1113 |
}; |
| 1114 |
|
| 1115 |
spi8: spi@4c8c000 { |
| 1116 |
compatible = "qcom,geni-spi"; |
| 1117 |
reg = <0x04c8c000 0x4000>; |
| 1118 |
clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>; |
| 1119 |
clock-names = "se"; |
| 1120 |
interrupts = <GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH>; |
| 1121 |
pinctrl-0 = <&qup_spi8_default>; |
| 1122 |
pinctrl-1 = <&qup_spi8_sleep>; |
| 1123 |
pinctrl-names = "default", "sleep"; |
| 1124 |
dmas = <&gpi_dma1 0 3 QCOM_GPI_SPI>, |
| 1125 |
<&gpi_dma1 1 3 QCOM_GPI_SPI>; |
| 1126 |
dma-names = "tx", "rx"; |
| 1127 |
#address-cells = <1>; |
| 1128 |
#size-cells = <0>; |
| 1129 |
status = "disabled"; |
| 1130 |
}; |
| 1131 |
|
| 1132 |
i2c9: i2c@4c90000 { |
| 1133 |
compatible = "qcom,geni-i2c"; |
| 1134 |
reg = <0x04c90000 0x4000>; |
| 1135 |
clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>; |
| 1136 |
clock-names = "se"; |
| 1137 |
interrupts = <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>; |
| 1138 |
pinctrl-0 = <&qup_i2c9_default>; |
| 1139 |
pinctrl-1 = <&qup_i2c9_sleep>; |
| 1140 |
pinctrl-names = "default", "sleep"; |
| 1141 |
dmas = <&gpi_dma1 0 4 QCOM_GPI_I2C>, |
| 1142 |
<&gpi_dma1 1 4 QCOM_GPI_I2C>; |
| 1143 |
dma-names = "tx", "rx"; |
| 1144 |
#address-cells = <1>; |
| 1145 |
#size-cells = <0>; |
| 1146 |
status = "disabled"; |
| 1147 |
}; |
| 1148 |
|
| 1149 |
spi9: spi@4c90000 { |
| 1150 |
compatible = "qcom,geni-spi"; |
| 1151 |
reg = <0x04c90000 0x4000>; |
| 1152 |
clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>; |
| 1153 |
clock-names = "se"; |
| 1154 |
interrupts = <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>; |
| 1155 |
pinctrl-0 = <&qup_spi9_default>; |
| 1156 |
pinctrl-1 = <&qup_spi9_sleep>; |
| 1157 |
pinctrl-names = "default", "sleep"; |
| 1158 |
dmas = <&gpi_dma1 0 4 QCOM_GPI_SPI>, |
| 1159 |
<&gpi_dma1 1 4 QCOM_GPI_SPI>; |
| 1160 |
dma-names = "tx", "rx"; |
| 1161 |
#address-cells = <1>; |
| 1162 |
#size-cells = <0>; |
| 1163 |
status = "disabled"; |
| 1164 |
}; |
| 1165 |
}; |
| 1166 |
|
| 1167 |
usb3: usb@4ef8800 { |
| 1168 |
compatible = "qcom,sm6125-dwc3", "qcom,dwc3"; |
| 1169 |
reg = <0x04ef8800 0x400>; |
| 1170 |
#address-cells = <1>; |
| 1171 |
#size-cells = <1>; |
| 1172 |
ranges; |
| 1173 |
|
| 1174 |
clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>, |
| 1175 |
<&gcc GCC_USB30_PRIM_MASTER_CLK>, |
| 1176 |
<&gcc GCC_SYS_NOC_USB3_PRIM_AXI_CLK>, |
| 1177 |
<&gcc GCC_USB30_PRIM_SLEEP_CLK>, |
| 1178 |
<&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>, |
| 1179 |
<&gcc GCC_USB3_PRIM_CLKREF_CLK>; |
| 1180 |
clock-names = "cfg_noc", |
| 1181 |
"core", |
| 1182 |
"iface", |
| 1183 |
"sleep", |
| 1184 |
"mock_utmi", |
| 1185 |
"xo"; |
| 1186 |
|
| 1187 |
assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>, |
| 1188 |
<&gcc GCC_USB30_PRIM_MASTER_CLK>; |
| 1189 |
assigned-clock-rates = <19200000>, <66666667>; |
| 1190 |
|
| 1191 |
interrupts = <GIC_SPI 302 IRQ_TYPE_LEVEL_HIGH>, |
| 1192 |
<GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>, |
| 1193 |
<GIC_SPI 254 IRQ_TYPE_LEVEL_HIGH>, |
| 1194 |
<GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>; |
| 1195 |
interrupt-names = "pwr_event", |
| 1196 |
"qusb2_phy", |
| 1197 |
"hs_phy_irq", |
| 1198 |
"ss_phy_irq"; |
| 1199 |
|
| 1200 |
power-domains = <&gcc USB30_PRIM_GDSC>; |
| 1201 |
qcom,select-utmi-as-pipe-clk; |
| 1202 |
status = "disabled"; |
| 1203 |
|
| 1204 |
usb3_dwc3: usb@4e00000 { |
| 1205 |
compatible = "snps,dwc3"; |
| 1206 |
reg = <0x04e00000 0xcd00>; |
| 1207 |
interrupts = <GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>; |
| 1208 |
iommus = <&apps_smmu 0x100 0x0>; |
| 1209 |
phys = <&hsusb_phy1>; |
| 1210 |
phy-names = "usb2-phy"; |
| 1211 |
snps,dis_u2_susphy_quirk; |
| 1212 |
snps,dis_enblslpm_quirk; |
| 1213 |
snps,dis-u1-entry-quirk; |
| 1214 |
snps,dis-u2-entry-quirk; |
| 1215 |
maximum-speed = "high-speed"; |
| 1216 |
dr_mode = "peripheral"; |
| 1217 |
}; |
| 1218 |
}; |
| 1219 |
|
| 1220 |
sram@4690000 { |
| 1221 |
compatible = "qcom,rpm-stats"; |
| 1222 |
reg = <0x04690000 0x10000>; |
| 1223 |
}; |
| 1224 |
|
| 1225 |
mdss: display-subsystem@5e00000 { |
| 1226 |
compatible = "qcom,sm6125-mdss"; |
| 1227 |
reg = <0x05e00000 0x1000>; |
| 1228 |
reg-names = "mdss"; |
| 1229 |
|
| 1230 |
interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>; |
| 1231 |
interrupt-controller; |
| 1232 |
#interrupt-cells = <1>; |
| 1233 |
|
| 1234 |
clocks = <&gcc GCC_DISP_AHB_CLK>, |
| 1235 |
<&dispcc DISP_CC_MDSS_AHB_CLK>, |
| 1236 |
<&dispcc DISP_CC_MDSS_MDP_CLK>; |
| 1237 |
clock-names = "iface", |
| 1238 |
"ahb", |
| 1239 |
"core"; |
| 1240 |
|
| 1241 |
power-domains = <&dispcc MDSS_GDSC>; |
| 1242 |
|
| 1243 |
iommus = <&apps_smmu 0x400 0x0>; |
| 1244 |
|
| 1245 |
#address-cells = <1>; |
| 1246 |
#size-cells = <1>; |
| 1247 |
ranges; |
| 1248 |
|
| 1249 |
status = "disabled"; |
| 1250 |
|
| 1251 |
mdss_mdp: display-controller@5e01000 { |
| 1252 |
compatible = "qcom,sm6125-dpu"; |
| 1253 |
reg = <0x05e01000 0x83208>, |
| 1254 |
<0x05eb0000 0x3000>; |
| 1255 |
reg-names = "mdp", "vbif"; |
| 1256 |
|
| 1257 |
interrupt-parent = <&mdss>; |
| 1258 |
interrupts = <0>; |
| 1259 |
|
| 1260 |
clocks = <&gcc GCC_DISP_HF_AXI_CLK>, |
| 1261 |
<&dispcc DISP_CC_MDSS_AHB_CLK>, |
| 1262 |
<&dispcc DISP_CC_MDSS_ROT_CLK>, |
| 1263 |
<&dispcc DISP_CC_MDSS_MDP_LUT_CLK>, |
| 1264 |
<&dispcc DISP_CC_MDSS_MDP_CLK>, |
| 1265 |
<&dispcc DISP_CC_MDSS_VSYNC_CLK>, |
| 1266 |
<&gcc GCC_DISP_THROTTLE_CORE_CLK>; |
| 1267 |
clock-names = "bus", |
| 1268 |
"iface", |
| 1269 |
"rot", |
| 1270 |
"lut", |
| 1271 |
"core", |
| 1272 |
"vsync", |
| 1273 |
"throttle"; |
| 1274 |
assigned-clocks = <&dispcc DISP_CC_MDSS_VSYNC_CLK>; |
| 1275 |
assigned-clock-rates = <19200000>; |
| 1276 |
|
| 1277 |
operating-points-v2 = <&mdp_opp_table>; |
| 1278 |
power-domains = <&rpmpd RPMPD_VDDCX>; |
| 1279 |
|
| 1280 |
ports { |
| 1281 |
#address-cells = <1>; |
| 1282 |
#size-cells = <0>; |
| 1283 |
|
| 1284 |
port@0 { |
| 1285 |
reg = <0>; |
| 1286 |
dpu_intf1_out: endpoint { |
| 1287 |
remote-endpoint = <&mdss_dsi0_in>; |
| 1288 |
}; |
| 1289 |
}; |
| 1290 |
}; |
| 1291 |
|
| 1292 |
mdp_opp_table: opp-table { |
| 1293 |
compatible = "operating-points-v2"; |
| 1294 |
|
| 1295 |
opp-192000000 { |
| 1296 |
opp-hz = /bits/ 64 <192000000>; |
| 1297 |
required-opps = <&rpmpd_opp_low_svs>; |
| 1298 |
}; |
| 1299 |
|
| 1300 |
opp-256000000 { |
| 1301 |
opp-hz = /bits/ 64 <256000000>; |
| 1302 |
required-opps = <&rpmpd_opp_svs>; |
| 1303 |
}; |
| 1304 |
|
| 1305 |
opp-307200000 { |
| 1306 |
opp-hz = /bits/ 64 <307200000>; |
| 1307 |
required-opps = <&rpmpd_opp_svs_plus>; |
| 1308 |
}; |
| 1309 |
|
| 1310 |
opp-384000000 { |
| 1311 |
opp-hz = /bits/ 64 <384000000>; |
| 1312 |
required-opps = <&rpmpd_opp_nom>; |
| 1313 |
}; |
| 1314 |
|
| 1315 |
opp-400000000 { |
| 1316 |
opp-hz = /bits/ 64 <400000000>; |
| 1317 |
required-opps = <&rpmpd_opp_turbo>; |
| 1318 |
}; |
| 1319 |
}; |
| 1320 |
}; |
| 1321 |
|
| 1322 |
mdss_dsi0: dsi@5e94000 { |
| 1323 |
compatible = "qcom,sm6125-dsi-ctrl", "qcom,mdss-dsi-ctrl"; |
| 1324 |
reg = <0x05e94000 0x400>; |
| 1325 |
reg-names = "dsi_ctrl"; |
| 1326 |
|
| 1327 |
interrupt-parent = <&mdss>; |
| 1328 |
interrupts = <4>; |
| 1329 |
|
| 1330 |
clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>, |
| 1331 |
<&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>, |
| 1332 |
<&dispcc DISP_CC_MDSS_PCLK0_CLK>, |
| 1333 |
<&dispcc DISP_CC_MDSS_ESC0_CLK>, |
| 1334 |
<&dispcc DISP_CC_MDSS_AHB_CLK>, |
| 1335 |
<&gcc GCC_DISP_HF_AXI_CLK>; |
| 1336 |
clock-names = "byte", |
| 1337 |
"byte_intf", |
| 1338 |
"pixel", |
| 1339 |
"core", |
| 1340 |
"iface", |
| 1341 |
"bus"; |
| 1342 |
assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>, |
| 1343 |
<&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>; |
| 1344 |
assigned-clock-parents = <&mdss_dsi0_phy DSI_BYTE_PLL_CLK>, |
| 1345 |
<&mdss_dsi0_phy DSI_PIXEL_PLL_CLK>; |
| 1346 |
|
| 1347 |
operating-points-v2 = <&dsi_opp_table>; |
| 1348 |
power-domains = <&rpmpd RPMPD_VDDCX>; |
| 1349 |
|
| 1350 |
phys = <&mdss_dsi0_phy>; |
| 1351 |
phy-names = "dsi"; |
| 1352 |
|
| 1353 |
#address-cells = <1>; |
| 1354 |
#size-cells = <0>; |
| 1355 |
|
| 1356 |
status = "disabled"; |
| 1357 |
|
| 1358 |
ports { |
| 1359 |
#address-cells = <1>; |
| 1360 |
#size-cells = <0>; |
| 1361 |
|
| 1362 |
port@0 { |
| 1363 |
reg = <0>; |
| 1364 |
mdss_dsi0_in: endpoint { |
| 1365 |
remote-endpoint = <&dpu_intf1_out>; |
| 1366 |
}; |
| 1367 |
}; |
| 1368 |
|
| 1369 |
port@1 { |
| 1370 |
reg = <1>; |
| 1371 |
mdss_dsi0_out: endpoint { |
| 1372 |
}; |
| 1373 |
}; |
| 1374 |
}; |
| 1375 |
|
| 1376 |
dsi_opp_table: opp-table { |
| 1377 |
compatible = "operating-points-v2"; |
| 1378 |
|
| 1379 |
opp-164000000 { |
| 1380 |
opp-hz = /bits/ 64 <164000000>; |
| 1381 |
required-opps = <&rpmpd_opp_low_svs>; |
| 1382 |
}; |
| 1383 |
|
| 1384 |
opp-187500000 { |
| 1385 |
opp-hz = /bits/ 64 <187500000>; |
| 1386 |
required-opps = <&rpmpd_opp_svs>; |
| 1387 |
}; |
| 1388 |
}; |
| 1389 |
}; |
| 1390 |
|
| 1391 |
mdss_dsi0_phy: phy@5e94400 { |
| 1392 |
compatible = "qcom,sm6125-dsi-phy-14nm"; |
| 1393 |
reg = <0x05e94400 0x100>, |
| 1394 |
<0x05e94500 0x300>, |
| 1395 |
<0x05e94800 0x188>; |
| 1396 |
reg-names = "dsi_phy", |
| 1397 |
"dsi_phy_lane", |
| 1398 |
"dsi_pll"; |
| 1399 |
|
| 1400 |
#clock-cells = <1>; |
| 1401 |
#phy-cells = <0>; |
| 1402 |
|
| 1403 |
clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, |
| 1404 |
<&rpmcc RPM_SMD_XO_CLK_SRC>; |
| 1405 |
clock-names = "iface", |
| 1406 |
"ref"; |
| 1407 |
|
| 1408 |
required-opps = <&rpmpd_opp_nom>; |
| 1409 |
power-domains = <&rpmpd RPMPD_VDDMX>; |
| 1410 |
|
| 1411 |
status = "disabled"; |
| 1412 |
}; |
| 1413 |
}; |
| 1414 |
|
| 1415 |
dispcc: clock-controller@5f00000 { |
| 1416 |
compatible = "qcom,sm6125-dispcc"; |
| 1417 |
reg = <0x05f00000 0x20000>; |
| 1418 |
|
| 1419 |
clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>, |
| 1420 |
<&mdss_dsi0_phy DSI_BYTE_PLL_CLK>, |
| 1421 |
<&mdss_dsi0_phy DSI_PIXEL_PLL_CLK>, |
| 1422 |
<0>, |
| 1423 |
<0>, |
| 1424 |
<0>, |
| 1425 |
<&gcc GCC_DISP_AHB_CLK>, |
| 1426 |
<&gcc GCC_DISP_GPLL0_DIV_CLK_SRC>; |
| 1427 |
clock-names = "bi_tcxo", |
| 1428 |
"dsi0_phy_pll_out_byteclk", |
| 1429 |
"dsi0_phy_pll_out_dsiclk", |
| 1430 |
"dsi1_phy_pll_out_dsiclk", |
| 1431 |
"dp_phy_pll_link_clk", |
| 1432 |
"dp_phy_pll_vco_div_clk", |
| 1433 |
"cfg_ahb_clk", |
| 1434 |
"gcc_disp_gpll0_div_clk_src"; |
| 1435 |
|
| 1436 |
required-opps = <&rpmpd_opp_ret>; |
| 1437 |
power-domains = <&rpmpd RPMPD_VDDCX>; |
| 1438 |
|
| 1439 |
#clock-cells = <1>; |
| 1440 |
#power-domain-cells = <1>; |
| 1441 |
}; |
| 1442 |
|
| 1443 |
apps_smmu: iommu@c600000 { |
| 1444 |
compatible = "qcom,sm6125-smmu-500", "qcom,smmu-500", "arm,mmu-500"; |
| 1445 |
reg = <0x0c600000 0x80000>; |
| 1446 |
interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>, |
| 1447 |
<GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>, |
| 1448 |
<GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>, |
| 1449 |
<GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>, |
| 1450 |
<GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>, |
| 1451 |
<GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>, |
| 1452 |
<GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>, |
| 1453 |
<GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>, |
| 1454 |
<GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>, |
| 1455 |
<GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>, |
| 1456 |
<GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>, |
| 1457 |
<GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>, |
| 1458 |
<GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>, |
| 1459 |
<GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>, |
| 1460 |
<GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>, |
| 1461 |
<GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>, |
| 1462 |
<GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>, |
| 1463 |
<GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>, |
| 1464 |
<GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>, |
| 1465 |
<GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>, |
| 1466 |
<GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>, |
| 1467 |
<GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>, |
| 1468 |
<GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>, |
| 1469 |
<GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>, |
| 1470 |
<GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>, |
| 1471 |
<GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>, |
| 1472 |
<GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>, |
| 1473 |
<GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>, |
| 1474 |
<GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>, |
| 1475 |
<GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>, |
| 1476 |
<GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>, |
| 1477 |
<GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>, |
| 1478 |
<GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>, |
| 1479 |
<GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>, |
| 1480 |
<GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>, |
| 1481 |
<GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>, |
| 1482 |
<GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, |
| 1483 |
<GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>, |
| 1484 |
<GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>, |
| 1485 |
<GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>, |
| 1486 |
<GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>, |
| 1487 |
<GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>, |
| 1488 |
<GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>, |
| 1489 |
<GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>, |
| 1490 |
<GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>, |
| 1491 |
<GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>, |
| 1492 |
<GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>, |
| 1493 |
<GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>, |
| 1494 |
<GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>, |
| 1495 |
<GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>, |
| 1496 |
<GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>, |
| 1497 |
<GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>, |
| 1498 |
<GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>, |
| 1499 |
<GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>, |
| 1500 |
<GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>, |
| 1501 |
<GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>, |
| 1502 |
<GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>, |
| 1503 |
<GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>, |
| 1504 |
<GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>, |
| 1505 |
<GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>, |
| 1506 |
<GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>, |
| 1507 |
<GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>, |
| 1508 |
<GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>, |
| 1509 |
<GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>, |
| 1510 |
<GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>; |
| 1511 |
|
| 1512 |
#global-interrupts = <1>; |
| 1513 |
#iommu-cells = <2>; |
| 1514 |
}; |
| 1515 |
|
| 1516 |
apcs_glb: mailbox@f111000 { |
| 1517 |
compatible = "qcom,sm6125-apcs-hmss-global", |
| 1518 |
"qcom,msm8994-apcs-kpss-global"; |
| 1519 |
reg = <0x0f111000 0x1000>; |
| 1520 |
|
| 1521 |
#mbox-cells = <1>; |
| 1522 |
}; |
| 1523 |
|
| 1524 |
timer@f120000 { |
| 1525 |
compatible = "arm,armv7-timer-mem"; |
| 1526 |
#address-cells = <1>; |
| 1527 |
#size-cells = <1>; |
| 1528 |
ranges; |
| 1529 |
reg = <0x0f120000 0x1000>; |
| 1530 |
clock-frequency = <19200000>; |
| 1531 |
|
| 1532 |
frame@f121000 { |
| 1533 |
frame-number = <0>; |
| 1534 |
interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, |
| 1535 |
<GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; |
| 1536 |
reg = <0x0f121000 0x1000>, |
| 1537 |
<0x0f122000 0x1000>; |
| 1538 |
}; |
| 1539 |
|
| 1540 |
frame@f123000 { |
| 1541 |
frame-number = <1>; |
| 1542 |
interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; |
| 1543 |
reg = <0x0f123000 0x1000>; |
| 1544 |
status = "disabled"; |
| 1545 |
}; |
| 1546 |
|
| 1547 |
frame@f124000 { |
| 1548 |
frame-number = <2>; |
| 1549 |
interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; |
| 1550 |
reg = <0x0f124000 0x1000>; |
| 1551 |
status = "disabled"; |
| 1552 |
}; |
| 1553 |
|
| 1554 |
frame@f125000 { |
| 1555 |
frame-number = <3>; |
| 1556 |
interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; |
| 1557 |
reg = <0x0f125000 0x1000>; |
| 1558 |
status = "disabled"; |
| 1559 |
}; |
| 1560 |
|
| 1561 |
frame@f126000 { |
| 1562 |
frame-number = <4>; |
| 1563 |
interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; |
| 1564 |
reg = <0x0f126000 0x1000>; |
| 1565 |
status = "disabled"; |
| 1566 |
}; |
| 1567 |
|
| 1568 |
frame@f127000 { |
| 1569 |
frame-number = <5>; |
| 1570 |
interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; |
| 1571 |
reg = <0x0f127000 0x1000>; |
| 1572 |
status = "disabled"; |
| 1573 |
}; |
| 1574 |
|
| 1575 |
frame@f128000 { |
| 1576 |
frame-number = <6>; |
| 1577 |
interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; |
| 1578 |
reg = <0x0f128000 0x1000>; |
| 1579 |
status = "disabled"; |
| 1580 |
}; |
| 1581 |
}; |
| 1582 |
|
| 1583 |
intc: interrupt-controller@f200000 { |
| 1584 |
compatible = "arm,gic-v3"; |
| 1585 |
reg = <0x0f200000 0x20000>, |
| 1586 |
<0x0f300000 0x100000>; |
| 1587 |
#interrupt-cells = <3>; |
| 1588 |
interrupt-controller; |
| 1589 |
interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; |
| 1590 |
}; |
| 1591 |
}; |
| 1592 |
|
| 1593 |
timer { |
| 1594 |
compatible = "arm,armv8-timer"; |
| 1595 |
interrupts = <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, |
| 1596 |
<GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, |
| 1597 |
<GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, |
| 1598 |
<GIC_PPI 0 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; |
| 1599 |
clock-frequency = <19200000>; |
| 1600 |
}; |
| 1601 |
}; |