| 1 |
// SPDX-License-Identifier: BSD-3-Clause |
| 2 |
/* |
| 3 |
* Copyright (c) 2022, Lux Aliaga <[email protected]> |
| 4 |
*/ |
| 5 |
|
| 6 |
/dts-v1/; |
| 7 |
|
| 8 |
#include <dt-bindings/gpio/gpio.h> |
| 9 |
#include <dt-bindings/input/input.h> |
| 10 |
#include <dt-bindings/input/gpio-keys.h> |
| 11 |
#include <dt-bindings/pinctrl/qcom,pmic-gpio.h> |
| 12 |
#include "sm6125.dtsi" |
| 13 |
#include "pm6125.dtsi" |
| 14 |
|
| 15 |
/ { |
| 16 |
model = "Xiaomi Mi A3"; |
| 17 |
compatible = "xiaomi,laurel-sprout", "qcom,sm6125"; |
| 18 |
chassis-type = "handset"; |
| 19 |
|
| 20 |
/* required for bootloader to select correct board */ |
| 21 |
qcom,msm-id = <394 0>; /* sm6125 v1 */ |
| 22 |
qcom,board-id = <11 0>; |
| 23 |
|
| 24 |
chosen { |
| 25 |
#address-cells = <2>; |
| 26 |
#size-cells = <2>; |
| 27 |
ranges; |
| 28 |
|
| 29 |
framebuffer0: framebuffer@5c000000 { |
| 30 |
compatible = "simple-framebuffer"; |
| 31 |
reg = <0 0x5c000000 0 (1560 * 720 * 4)>; |
| 32 |
width = <720>; |
| 33 |
height = <1560>; |
| 34 |
stride = <(720 * 4)>; |
| 35 |
format = "a8r8g8b8"; |
| 36 |
}; |
| 37 |
}; |
| 38 |
|
| 39 |
reserved-memory { |
| 40 |
debug_mem: debug@ffb00000 { |
| 41 |
reg = <0x0 0xffb00000 0x0 0xc0000>; |
| 42 |
no-map; |
| 43 |
}; |
| 44 |
|
| 45 |
last_log_mem: lastlog@ffbc0000 { |
| 46 |
reg = <0x0 0xffbc0000 0x0 0x80000>; |
| 47 |
no-map; |
| 48 |
}; |
| 49 |
|
| 50 |
pstore_mem: ramoops@ffc00000 { |
| 51 |
compatible = "ramoops"; |
| 52 |
reg = <0x0 0xffc40000 0x0 0xc0000>; |
| 53 |
record-size = <0x1000>; |
| 54 |
console-size = <0x40000>; |
| 55 |
pmsg-size = <0x20000>; |
| 56 |
}; |
| 57 |
|
| 58 |
cmdline_mem: memory@ffd00000 { |
| 59 |
reg = <0x0 0xffd40000 0x0 0x1000>; |
| 60 |
no-map; |
| 61 |
}; |
| 62 |
}; |
| 63 |
|
| 64 |
extcon_usb: usb-id { |
| 65 |
compatible = "linux,extcon-usb-gpio"; |
| 66 |
id-gpios = <&tlmm 102 GPIO_ACTIVE_HIGH>; |
| 67 |
}; |
| 68 |
|
| 69 |
gpio-keys { |
| 70 |
compatible = "gpio-keys"; |
| 71 |
|
| 72 |
pinctrl-0 = <&vol_up_n>; |
| 73 |
pinctrl-names = "default"; |
| 74 |
|
| 75 |
key-volume-up { |
| 76 |
label = "Volume Up"; |
| 77 |
gpios = <&pm6125_gpios 5 GPIO_ACTIVE_LOW>; |
| 78 |
linux,code = <KEY_VOLUMEUP>; |
| 79 |
debounce-interval = <15>; |
| 80 |
linux,can-disable; |
| 81 |
wakeup-source; |
| 82 |
}; |
| 83 |
}; |
| 84 |
|
| 85 |
thermal-zones { |
| 86 |
rf-pa0-thermal { |
| 87 |
thermal-sensors = <&pm6125_adc_tm 0>; |
| 88 |
|
| 89 |
trips { |
| 90 |
active-config0 { |
| 91 |
temperature = <125000>; |
| 92 |
hysteresis = <1000>; |
| 93 |
type = "critical"; |
| 94 |
}; |
| 95 |
}; |
| 96 |
}; |
| 97 |
|
| 98 |
quiet-thermal { |
| 99 |
thermal-sensors = <&pm6125_adc_tm 1>; |
| 100 |
|
| 101 |
trips { |
| 102 |
active-config0 { |
| 103 |
temperature = <125000>; |
| 104 |
hysteresis = <1000>; |
| 105 |
type = "critical"; |
| 106 |
}; |
| 107 |
}; |
| 108 |
}; |
| 109 |
|
| 110 |
xo-thermal { |
| 111 |
thermal-sensors = <&pm6125_adc_tm 2>; |
| 112 |
|
| 113 |
trips { |
| 114 |
active-config0 { |
| 115 |
temperature = <125000>; |
| 116 |
hysteresis = <1000>; |
| 117 |
type = "critical"; |
| 118 |
}; |
| 119 |
}; |
| 120 |
}; |
| 121 |
}; |
| 122 |
}; |
| 123 |
|
| 124 |
&hsusb_phy1 { |
| 125 |
vdd-supply = <&vreg_l7a>; |
| 126 |
vdda-pll-supply = <&vreg_l10a>; |
| 127 |
vdda-phy-dpdm-supply = <&vreg_l15a>; |
| 128 |
status = "okay"; |
| 129 |
}; |
| 130 |
|
| 131 |
&pm6125_adc { |
| 132 |
pinctrl-names = "default"; |
| 133 |
pinctrl-0 = <&camera_flash_therm &emmc_ufs_therm>; |
| 134 |
|
| 135 |
channel@4d { |
| 136 |
reg = <ADC5_AMUX_THM1_100K_PU>; |
| 137 |
qcom,ratiometric; |
| 138 |
qcom,hw-settle-time = <200>; |
| 139 |
qcom,pre-scaling = <1 1>; |
| 140 |
label = "rf_pa0_therm"; |
| 141 |
}; |
| 142 |
|
| 143 |
channel@4e { |
| 144 |
reg = <ADC5_AMUX_THM2_100K_PU>; |
| 145 |
qcom,ratiometric; |
| 146 |
qcom,hw-settle-time = <200>; |
| 147 |
qcom,pre-scaling = <1 1>; |
| 148 |
label = "quiet_therm"; |
| 149 |
}; |
| 150 |
|
| 151 |
channel@52 { |
| 152 |
reg = <ADC5_GPIO1_100K_PU>; |
| 153 |
qcom,ratiometric; |
| 154 |
qcom,hw-settle-time = <200>; |
| 155 |
qcom,pre-scaling = <1 1>; |
| 156 |
label = "camera_flash_therm"; |
| 157 |
}; |
| 158 |
|
| 159 |
channel@54 { |
| 160 |
reg = <ADC5_GPIO3_100K_PU>; |
| 161 |
qcom,ratiometric; |
| 162 |
qcom,hw-settle-time = <200>; |
| 163 |
qcom,pre-scaling = <1 1>; |
| 164 |
label = "emmc_ufs_therm"; |
| 165 |
}; |
| 166 |
}; |
| 167 |
|
| 168 |
&pm6125_adc_tm { |
| 169 |
status = "okay"; |
| 170 |
|
| 171 |
rf-pa0-therm@0 { |
| 172 |
reg = <0>; |
| 173 |
io-channels = <&pm6125_adc ADC5_AMUX_THM1_100K_PU>; |
| 174 |
qcom,ratiometric; |
| 175 |
qcom,hw-settle-time-us = <200>; |
| 176 |
}; |
| 177 |
|
| 178 |
quiet-therm@1 { |
| 179 |
reg = <1>; |
| 180 |
io-channels = <&pm6125_adc ADC5_AMUX_THM2_100K_PU>; |
| 181 |
qcom,ratiometric; |
| 182 |
qcom,hw-settle-time-us = <200>; |
| 183 |
}; |
| 184 |
|
| 185 |
xo-therm@2 { |
| 186 |
reg = <2>; |
| 187 |
io-channels = <&pm6125_adc ADC5_XO_THERM_100K_PU>; |
| 188 |
qcom,ratiometric; |
| 189 |
qcom,hw-settle-time-us = <200>; |
| 190 |
}; |
| 191 |
}; |
| 192 |
|
| 193 |
&pm6125_gpios { |
| 194 |
camera_flash_therm: camera-flash-therm-state { |
| 195 |
pins = "gpio3"; |
| 196 |
function = PMIC_GPIO_FUNC_NORMAL; |
| 197 |
bias-high-impedance; |
| 198 |
}; |
| 199 |
|
| 200 |
emmc_ufs_therm: emmc-ufs-therm-state { |
| 201 |
pins = "gpio6"; |
| 202 |
function = PMIC_GPIO_FUNC_NORMAL; |
| 203 |
bias-high-impedance; |
| 204 |
}; |
| 205 |
|
| 206 |
vol_up_n: vol-up-n-state { |
| 207 |
pins = "gpio5"; |
| 208 |
function = PMIC_GPIO_FUNC_NORMAL; |
| 209 |
input-enable; |
| 210 |
bias-pull-up; |
| 211 |
}; |
| 212 |
}; |
| 213 |
|
| 214 |
&pon_pwrkey { |
| 215 |
status = "okay"; |
| 216 |
}; |
| 217 |
|
| 218 |
&pon_resin { |
| 219 |
linux,code = <KEY_VOLUMEDOWN>; |
| 220 |
status = "okay"; |
| 221 |
}; |
| 222 |
|
| 223 |
&rpm_requests { |
| 224 |
regulators-0 { |
| 225 |
compatible = "qcom,rpm-pm6125-regulators"; |
| 226 |
|
| 227 |
vreg_s6a: s6 { |
| 228 |
regulator-min-microvolt = <936000>; |
| 229 |
regulator-max-microvolt = <1422000>; |
| 230 |
}; |
| 231 |
|
| 232 |
vreg_l1a: l1 { |
| 233 |
regulator-min-microvolt = <1200000>; |
| 234 |
regulator-max-microvolt = <1256000>; |
| 235 |
}; |
| 236 |
|
| 237 |
vreg_l2a: l2 { |
| 238 |
regulator-min-microvolt = <1000000>; |
| 239 |
regulator-max-microvolt = <1056000>; |
| 240 |
}; |
| 241 |
|
| 242 |
vreg_l3a: l3 { |
| 243 |
regulator-min-microvolt = <1000000>; |
| 244 |
regulator-max-microvolt = <1064000>; |
| 245 |
}; |
| 246 |
|
| 247 |
vreg_l4a: l4 { |
| 248 |
regulator-min-microvolt = <872000>; |
| 249 |
regulator-max-microvolt = <976000>; |
| 250 |
regulator-allow-set-load; |
| 251 |
}; |
| 252 |
|
| 253 |
vreg_l5a: l5 { |
| 254 |
regulator-min-microvolt = <1648000>; |
| 255 |
regulator-max-microvolt = <2950000>; |
| 256 |
regulator-allow-set-load; |
| 257 |
}; |
| 258 |
|
| 259 |
vreg_l6a: l6 { |
| 260 |
regulator-min-microvolt = <576000>; |
| 261 |
regulator-max-microvolt = <656000>; |
| 262 |
}; |
| 263 |
|
| 264 |
vreg_l7a: l7 { |
| 265 |
regulator-min-microvolt = <872000>; |
| 266 |
regulator-max-microvolt = <976000>; |
| 267 |
}; |
| 268 |
|
| 269 |
vreg_l8a: l8 { |
| 270 |
regulator-min-microvolt = <400000>; |
| 271 |
regulator-max-microvolt = <728000>; |
| 272 |
}; |
| 273 |
|
| 274 |
vreg_l9a: l9 { |
| 275 |
regulator-min-microvolt = <1800000>; |
| 276 |
regulator-max-microvolt = <1896000>; |
| 277 |
}; |
| 278 |
|
| 279 |
vreg_l10a: l10 { |
| 280 |
regulator-min-microvolt = <1800000>; |
| 281 |
regulator-max-microvolt = <1896000>; |
| 282 |
regulator-allow-set-load; |
| 283 |
}; |
| 284 |
|
| 285 |
vreg_l11a: l11 { |
| 286 |
regulator-min-microvolt = <1800000>; |
| 287 |
regulator-max-microvolt = <1952000>; |
| 288 |
regulator-allow-set-load; |
| 289 |
}; |
| 290 |
|
| 291 |
vreg_l12a: l12 { |
| 292 |
regulator-min-microvolt = <1800000>; |
| 293 |
regulator-max-microvolt = <1996000>; |
| 294 |
}; |
| 295 |
|
| 296 |
vreg_l13a: l13 { |
| 297 |
regulator-min-microvolt = <1800000>; |
| 298 |
regulator-max-microvolt = <1832000>; |
| 299 |
}; |
| 300 |
|
| 301 |
vreg_l14a: l14 { |
| 302 |
regulator-min-microvolt = <1800000>; |
| 303 |
regulator-max-microvolt = <1904000>; |
| 304 |
}; |
| 305 |
|
| 306 |
vreg_l15a: l15 { |
| 307 |
regulator-min-microvolt = <3104000>; |
| 308 |
regulator-max-microvolt = <3232000>; |
| 309 |
}; |
| 310 |
|
| 311 |
vreg_l16a: l16 { |
| 312 |
regulator-min-microvolt = <1800000>; |
| 313 |
regulator-max-microvolt = <1904000>; |
| 314 |
}; |
| 315 |
|
| 316 |
vreg_l17a: l17 { |
| 317 |
regulator-min-microvolt = <1248000>; |
| 318 |
regulator-max-microvolt = <1304000>; |
| 319 |
}; |
| 320 |
|
| 321 |
vreg_l18a: l18 { |
| 322 |
regulator-min-microvolt = <1200000>; |
| 323 |
regulator-max-microvolt = <1264000>; |
| 324 |
regulator-allow-set-load; |
| 325 |
}; |
| 326 |
|
| 327 |
vreg_l19a: l19 { |
| 328 |
regulator-min-microvolt = <1648000>; |
| 329 |
regulator-max-microvolt = <2952000>; |
| 330 |
}; |
| 331 |
|
| 332 |
vreg_l20a: l20 { |
| 333 |
regulator-min-microvolt = <1648000>; |
| 334 |
regulator-max-microvolt = <2952000>; |
| 335 |
}; |
| 336 |
|
| 337 |
vreg_l21a: l21 { |
| 338 |
regulator-min-microvolt = <2600000>; |
| 339 |
regulator-max-microvolt = <2856000>; |
| 340 |
}; |
| 341 |
|
| 342 |
vreg_l22a: l22 { |
| 343 |
regulator-min-microvolt = <2944000>; |
| 344 |
regulator-max-microvolt = <2950000>; |
| 345 |
regulator-allow-set-load; |
| 346 |
}; |
| 347 |
|
| 348 |
vreg_l23a: l23 { |
| 349 |
regulator-min-microvolt = <3000000>; |
| 350 |
regulator-max-microvolt = <3400000>; |
| 351 |
}; |
| 352 |
|
| 353 |
vreg_l24a: l24 { |
| 354 |
regulator-min-microvolt = <2944000>; |
| 355 |
regulator-max-microvolt = <2950000>; |
| 356 |
regulator-allow-set-load; |
| 357 |
}; |
| 358 |
}; |
| 359 |
}; |
| 360 |
|
| 361 |
&sdc2_off_state { |
| 362 |
sd-cd-pins { |
| 363 |
pins = "gpio98"; |
| 364 |
function = "gpio"; |
| 365 |
drive-strength = <2>; |
| 366 |
bias-disable; |
| 367 |
}; |
| 368 |
}; |
| 369 |
|
| 370 |
&sdc2_on_state { |
| 371 |
sd-cd-pins { |
| 372 |
pins = "gpio98"; |
| 373 |
function = "gpio"; |
| 374 |
drive-strength = <2>; |
| 375 |
bias-pull-up; |
| 376 |
}; |
| 377 |
}; |
| 378 |
|
| 379 |
&sdhc_2 { |
| 380 |
cd-gpios = <&tlmm 98 GPIO_ACTIVE_HIGH>; |
| 381 |
vmmc-supply = <&vreg_l22a>; |
| 382 |
vqmmc-supply = <&vreg_l5a>; |
| 383 |
no-sdio; |
| 384 |
no-mmc; |
| 385 |
status = "okay"; |
| 386 |
}; |
| 387 |
|
| 388 |
&tlmm { |
| 389 |
gpio-reserved-ranges = <22 2>, <28 6>; |
| 390 |
}; |
| 391 |
|
| 392 |
&ufs_mem_hc { |
| 393 |
vcc-supply = <&vreg_l24a>; |
| 394 |
vccq2-supply = <&vreg_l11a>; |
| 395 |
vcc-max-microamp = <600000>; |
| 396 |
vccq2-max-microamp = <600000>; |
| 397 |
vdd-hba-supply = <&vreg_l18a>; |
| 398 |
status = "okay"; |
| 399 |
}; |
| 400 |
|
| 401 |
&ufs_mem_phy { |
| 402 |
vdda-phy-supply = <&vreg_l4a>; |
| 403 |
vdda-pll-supply = <&vreg_l10a>; |
| 404 |
status = "okay"; |
| 405 |
}; |
| 406 |
|
| 407 |
&usb3 { |
| 408 |
status = "okay"; |
| 409 |
}; |
| 410 |
|
| 411 |
&usb3_dwc3 { |
| 412 |
extcon = <&extcon_usb>; |
| 413 |
}; |