| 1 |
// SPDX-License-Identifier: GPL-2.0 |
| 2 |
/* |
| 3 |
* SDM845 SoC device tree source |
| 4 |
* |
| 5 |
* Copyright (c) 2018, The Linux Foundation. All rights reserved. |
| 6 |
*/ |
| 7 |
|
| 8 |
&slim { |
| 9 |
status = "okay"; |
| 10 |
|
| 11 |
slim@1 { |
| 12 |
reg = <1>; |
| 13 |
#address-cells = <2>; |
| 14 |
#size-cells = <0>; |
| 15 |
|
| 16 |
wcd9340_ifd: ifd@0,0 { |
| 17 |
compatible = "slim217,250"; |
| 18 |
reg = <0 0>; |
| 19 |
}; |
| 20 |
|
| 21 |
wcd9340: codec@1,0 { |
| 22 |
compatible = "slim217,250"; |
| 23 |
reg = <1 0>; |
| 24 |
slim-ifc-dev = <&wcd9340_ifd>; |
| 25 |
|
| 26 |
#sound-dai-cells = <1>; |
| 27 |
|
| 28 |
interrupts-extended = <&tlmm 54 IRQ_TYPE_LEVEL_HIGH>; |
| 29 |
interrupt-controller; |
| 30 |
#interrupt-cells = <1>; |
| 31 |
|
| 32 |
clock-names = "extclk"; |
| 33 |
clocks = <&rpmhcc RPMH_LN_BB_CLK2>; |
| 34 |
|
| 35 |
#clock-cells = <0>; |
| 36 |
clock-frequency = <9600000>; |
| 37 |
clock-output-names = "mclk"; |
| 38 |
|
| 39 |
pinctrl-0 = <&wcd_intr_default>; |
| 40 |
pinctrl-names = "default"; |
| 41 |
|
| 42 |
qcom,micbias1-microvolt = <1800000>; |
| 43 |
qcom,micbias2-microvolt = <1800000>; |
| 44 |
qcom,micbias3-microvolt = <1800000>; |
| 45 |
qcom,micbias4-microvolt = <1800000>; |
| 46 |
|
| 47 |
#address-cells = <1>; |
| 48 |
#size-cells = <1>; |
| 49 |
|
| 50 |
wcdgpio: gpio-controller@42 { |
| 51 |
compatible = "qcom,wcd9340-gpio"; |
| 52 |
gpio-controller; |
| 53 |
#gpio-cells = <2>; |
| 54 |
reg = <0x42 0x2>; |
| 55 |
}; |
| 56 |
|
| 57 |
swm: soundwire@c85 { |
| 58 |
compatible = "qcom,soundwire-v1.3.0"; |
| 59 |
reg = <0xc85 0x40>; |
| 60 |
interrupts-extended = <&wcd9340 20>; |
| 61 |
|
| 62 |
qcom,dout-ports = <6>; |
| 63 |
qcom,din-ports = <2>; |
| 64 |
qcom,ports-sinterval-low = /bits/ 8 <0x07 0x1f 0x3f 0x7 0x1f 0x3f 0x0f 0x0f>; |
| 65 |
qcom,ports-offset1 = /bits/ 8 <0x01 0x02 0x0c 0x6 0x12 0x0d 0x07 0x0a>; |
| 66 |
qcom,ports-offset2 = /bits/ 8 <0x00 0x00 0x1f 0x00 0x00 0x1f 0x00 0x00>; |
| 67 |
|
| 68 |
#sound-dai-cells = <1>; |
| 69 |
clocks = <&wcd9340>; |
| 70 |
clock-names = "iface"; |
| 71 |
#address-cells = <2>; |
| 72 |
#size-cells = <0>; |
| 73 |
}; |
| 74 |
}; |
| 75 |
}; |
| 76 |
}; |
| 77 |
|
| 78 |
&tlmm { |
| 79 |
wcd_intr_default: wcd-intr-default-state { |
| 80 |
pins = "gpio54"; |
| 81 |
function = "gpio"; |
| 82 |
|
| 83 |
bias-pull-down; |
| 84 |
drive-strength = <2>; |
| 85 |
}; |
| 86 |
}; |