Debian Codegraph @

scripts/dtc/include-prefixes/arm64/qcom/sdm845-sony-xperia-tama.dtsi

raw
1 // SPDX-License-Identifier: BSD-3-Clause
2 /*
3 * Copyright (c) 2021, Konrad Dybcio <[email protected]>
4 */
5
6 #include <dt-bindings/arm/qcom,ids.h>
7 #include <dt-bindings/input/input.h>
8 #include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
9 #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
10 #include "sdm845.dtsi"
11 #include "pm8005.dtsi"
12 #include "pm8998.dtsi"
13 #include "pmi8998.dtsi"
14
15 / {
16 qcom,msm-id = <QCOM_ID_SDM845 0x20001>; /* SDM845 v2.1 */
17 qcom,board-id = <8 0>;
18
19 aliases {
20 serial0 = &uart6;
21 serial1 = &uart9;
22 };
23
24 chosen {
25 stdout-path = "serial0:115200n8";
26 };
27
28 gpio-keys {
29 compatible = "gpio-keys";
30
31 pinctrl-0 = <&focus_n &snapshot_n &vol_down_n &vol_up_n>;
32 pinctrl-names = "default";
33
34 key-camera-focus {
35 label = "Camera Focus";
36 gpios = <&pm8998_gpios 2 GPIO_ACTIVE_LOW>;
37 linux,code = <KEY_CAMERA_FOCUS>;
38 debounce-interval = <15>;
39 linux,can-disable;
40 wakeup-source;
41 };
42
43 key-camera-snapshot {
44 label = "Camera Snapshot";
45 gpios = <&pm8998_gpios 7 GPIO_ACTIVE_LOW>;
46 linux,code = <KEY_CAMERA>;
47 debounce-interval = <15>;
48 linux,can-disable;
49 wakeup-source;
50 };
51
52 key-volume-down {
53 label = "Volume Down";
54 gpios = <&pm8998_gpios 5 GPIO_ACTIVE_LOW>;
55 linux,code = <KEY_VOLUMEDOWN>;
56 debounce-interval = <15>;
57 linux,can-disable;
58 wakeup-source;
59 };
60
61 key-volume-up {
62 label = "Volume Up";
63 gpios = <&pm8998_gpios 6 GPIO_ACTIVE_LOW>;
64 linux,code = <KEY_VOLUMEUP>;
65 debounce-interval = <15>;
66 linux,can-disable;
67 wakeup-source;
68 };
69 };
70
71 cam_vana_front_vreg: cam-vana-front-regulator {
72 compatible = "regulator-fixed";
73 regulator-name = "cam_vana_front_vreg";
74 gpio = <&tlmm 8 GPIO_ACTIVE_HIGH>;
75 enable-active-high;
76
77 pinctrl-0 = <&chat_cam_pwr_en>;
78 pinctrl-names = "default";
79 };
80
81 cam_vana_rear_vreg: cam-vana-rear-regulator {
82 compatible = "regulator-fixed";
83 regulator-name = "cam_vana_rear_vreg";
84 gpio = <&tlmm 27 GPIO_ACTIVE_HIGH>;
85 enable-active-high;
86
87 pinctrl-0 = <&main_cam_pwr_en>;
88 pinctrl-names = "default";
89 };
90
91 cam_vio_vreg: cam-vio-reagulator {
92 compatible = "regulator-fixed";
93 regulator-name = "cam_vio_vreg";
94 gpio = <&pmi8998_gpios 12 GPIO_ACTIVE_HIGH>;
95 enable-active-high;
96
97 pinctrl-0 = <&cam_io_en>;
98 pinctrl-names = "default";
99 };
100
101 vph_pwr: vph-pwr-regulator {
102 compatible = "regulator-fixed";
103 regulator-name = "vph_pwr";
104 regulator-min-microvolt = <3700000>;
105 regulator-max-microvolt = <3700000>;
106 };
107
108 vreg_s4a_1p8: pm8998-smps4 {
109 compatible = "regulator-fixed";
110 regulator-name = "vreg_s4a_1p8";
111
112 regulator-min-microvolt = <1800000>;
113 regulator-max-microvolt = <1800000>;
114
115 regulator-always-on;
116 regulator-boot-on;
117
118 vin-supply = <&vph_pwr>;
119 };
120
121 reserved-memory {
122 /* SONY was cool and didn't diverge from MTP this time, yay! */
123 cont_splash_mem: memory@9d400000 {
124 reg = <0x0 0x9d400000 0x0 0x2400000>;
125 no-map;
126 };
127
128 ramoops@ffc00000 {
129 compatible = "ramoops";
130 reg = <0x0 0xffc00000 0x0 0x100000>;
131 record-size = <0x10000>;
132 console-size = <0x60000>;
133 ftrace-size = <0x10000>;
134 pmsg-size = <0x20000>;
135 ecc-size = <16>;
136 no-map;
137 };
138 };
139 };
140
141 &adsp_pas {
142 firmware-name = "qcom/sdm845/Sony/tama/adsp.mbn";
143 status = "okay";
144 };
145
146 &apps_rsc {
147 regulators-0 {
148 compatible = "qcom,pm8998-rpmh-regulators";
149 qcom,pmic-id = "a";
150
151 vdd-s1-supply = <&vph_pwr>;
152 vdd-s2-supply = <&vph_pwr>;
153 vdd-s3-supply = <&vph_pwr>;
154 vdd-s4-supply = <&vph_pwr>;
155 vdd-s5-supply = <&vph_pwr>;
156 vdd-s6-supply = <&vph_pwr>;
157 vdd-s7-supply = <&vph_pwr>;
158 vdd-s8-supply = <&vph_pwr>;
159 vdd-s9-supply = <&vph_pwr>;
160 vdd-s10-supply = <&vph_pwr>;
161 vdd-s11-supply = <&vph_pwr>;
162 vdd-s12-supply = <&vph_pwr>;
163 vdd-s13-supply = <&vph_pwr>;
164 vdd-l1-l27-supply = <&vreg_s7a_0p9>;
165 vdd-l2-l8-l17-supply = <&vreg_s3a_1p3>;
166 vdd-l3-l11-supply = <&vreg_s7a_0p9>;
167 vdd-l4-l5-supply = <&vreg_s7a_0p9>;
168 vdd-l6-supply = <&vph_pwr>;
169 vdd-l7-l12-l14-l15-supply = <&vreg_s5a_1p9>;
170 vdd-l9-supply = <&vreg_s5a_1p9>;
171 vdd-l10-l23-l25-supply = <&src_vreg_bob>;
172 vdd-l13-l19-l21-supply = <&src_vreg_bob>;
173 vdd-l16-l28-supply = <&src_vreg_bob>;
174 vdd-l18-l22-supply = <&src_vreg_bob>;
175 vdd-l20-l24-supply = <&src_vreg_bob>;
176 vdd-l26-supply = <&vreg_s3a_1p3>;
177 vin-lvs-1-2-supply = <&vreg_s4a_1p8>;
178
179 vreg_s2a_1p1: smps2 {
180 regulator-min-microvolt = <1100000>;
181 regulator-max-microvolt = <1100000>;
182 };
183
184 vreg_s3a_1p3: smps3 {
185 regulator-min-microvolt = <1352000>;
186 regulator-max-microvolt = <1352000>;
187 };
188
189 vreg_s5a_1p9: smps5 {
190 regulator-min-microvolt = <1904000>;
191 regulator-max-microvolt = <2040000>;
192 };
193
194 vreg_s7a_0p9: smps7 {
195 regulator-min-microvolt = <900000>;
196 regulator-max-microvolt = <1028000>;
197 };
198
199 vreg_l1a_0p9: ldo1 {
200 regulator-min-microvolt = <880000>;
201 regulator-max-microvolt = <880000>;
202 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
203 };
204
205 vreg_l2a_1p2: ldo2 {
206 regulator-min-microvolt = <1200000>;
207 regulator-max-microvolt = <1200000>;
208 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
209 regulator-always-on;
210 };
211
212 vreg_l3a_1p0: ldo3 {
213 regulator-min-microvolt = <1000000>;
214 regulator-max-microvolt = <1000000>;
215 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
216 };
217
218 vreg_l5a_0p8: ldo5 {
219 regulator-min-microvolt = <800000>;
220 regulator-max-microvolt = <800000>;
221 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
222 };
223
224 vreg_l6a_1p8: ldo6 {
225 regulator-min-microvolt = <1856000>;
226 regulator-max-microvolt = <1856000>;
227 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
228 };
229
230 vreg_l7a_1p8: ldo7 {
231 regulator-min-microvolt = <1800000>;
232 regulator-max-microvolt = <1800000>;
233 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
234 };
235
236 vreg_l8a_1p2: ldo8 {
237 regulator-min-microvolt = <1200000>;
238 regulator-max-microvolt = <1248000>;
239 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
240 };
241
242 vreg_l9a_1p7: ldo9 {
243 regulator-min-microvolt = <1704000>;
244 regulator-max-microvolt = <2928000>;
245 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
246 };
247
248 vreg_l10a_1p7: ldo10 {
249 regulator-min-microvolt = <1704000>;
250 regulator-max-microvolt = <2928000>;
251 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
252 };
253
254 vreg_l11a_1p0: ldo11 {
255 regulator-min-microvolt = <1000000>;
256 regulator-max-microvolt = <1048000>;
257 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
258 };
259
260 vreg_l12a_1p8: ldo12 {
261 regulator-min-microvolt = <1800000>;
262 regulator-max-microvolt = <1800000>;
263 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
264 };
265
266 vreg_l13a_1p8: ldo13 {
267 regulator-min-microvolt = <1800000>;
268 regulator-max-microvolt = <2960000>;
269 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
270 };
271
272 vreg_l14a_1p8: ldo14 {
273 regulator-min-microvolt = <1800000>;
274 regulator-max-microvolt = <1800000>;
275 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
276 regulator-system-load = <62000>;
277 };
278
279 vreg_l15a_1p8: ldo15 {
280 regulator-min-microvolt = <1800000>;
281 regulator-max-microvolt = <1800000>;
282 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
283 };
284
285 vreg_l16a_2p7: ldo16 {
286 regulator-min-microvolt = <2704000>;
287 regulator-max-microvolt = <2704000>;
288 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
289 };
290
291 vreg_l17a_1p3: ldo17 {
292 regulator-min-microvolt = <1304000>;
293 regulator-max-microvolt = <1304000>;
294 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
295 };
296
297 vreg_l18a_2p7: ldo18 {
298 regulator-min-microvolt = <2704000>;
299 regulator-max-microvolt = <2960000>;
300 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
301 };
302
303 vreg_l19a_2p7: ldo19 {
304 regulator-min-microvolt = <2700000>;
305 regulator-max-microvolt = <2700000>;
306 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
307
308 /*
309 * The driver *really* doesn't want this regualtor to exist,
310 * saying that it could not get the current voltage (-ENOTRECOVERABLE)
311 * even though it surely is used on these devices (as a voltage
312 * source for camera autofocus)
313 */
314 status = "disabled";
315 };
316
317 vreg_l20a_2p7: ldo20 {
318 regulator-min-microvolt = <2704000>;
319 regulator-max-microvolt = <2960000>;
320 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
321 };
322
323 vreg_l21a_2p7: ldo21 {
324 regulator-min-microvolt = <2704000>;
325 regulator-max-microvolt = <2960000>;
326 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
327 };
328
329 vreg_l22a_2p8: ldo22 {
330 regulator-min-microvolt = <2800000>;
331 regulator-max-microvolt = <2800000>;
332 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
333 };
334
335 vreg_l23a_3p0: ldo23 {
336 regulator-min-microvolt = <3000000>;
337 regulator-max-microvolt = <3312000>;
338 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
339 };
340
341 vreg_l24a_3p1: ldo24 {
342 regulator-min-microvolt = <3088000>;
343 regulator-max-microvolt = <3088000>;
344 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
345 };
346
347 vreg_l25a_3p0: ldo25 {
348 regulator-min-microvolt = <3000000>;
349 regulator-max-microvolt = <3312000>;
350 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
351 };
352
353 vreg_l26a_1p2: ldo26 {
354 regulator-min-microvolt = <1200000>;
355 regulator-max-microvolt = <1200000>;
356 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
357 };
358
359 vreg_l28a_2p8: ldo28 {
360 regulator-min-microvolt = <2856000>;
361 regulator-max-microvolt = <3008000>;
362 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
363 regulator-system-load = <100000>;
364 };
365
366 vreg_lvs1a_1p8: lvs1 {
367 regulator-min-microvolt = <1800000>;
368 regulator-max-microvolt = <1800000>;
369 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
370 };
371
372 vreg_lvs2a_1p8: lvs2 {
373 regulator-min-microvolt = <1800000>;
374 regulator-max-microvolt = <1800000>;
375 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
376 };
377 };
378
379 regulators-1 {
380 compatible = "qcom,pmi8998-rpmh-regulators";
381 qcom,pmic-id = "b";
382
383 src_vreg_bob: bob {
384 regulator-min-microvolt = <3312000>;
385 regulator-max-microvolt = <3600000>;
386 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
387 };
388 };
389
390 regulators-2 {
391 compatible = "qcom,pm8005-rpmh-regulators";
392 qcom,pmic-id = "c";
393
394 vdd-s1-supply = <&vph_pwr>;
395 vdd-s2-supply = <&vph_pwr>;
396 vdd-s3-supply = <&vph_pwr>;
397 vdd-s4-supply = <&vph_pwr>;
398
399 vreg_s3c_0p6: smps3 {
400 regulator-min-microvolt = <600000>;
401 regulator-max-microvolt = <600000>;
402 };
403 };
404 };
405
406 &cdsp_pas {
407 firmware-name = "qcom/sdm845/Sony/tama/cdsp.mbn";
408 status = "okay";
409 };
410
411 &gcc {
412 protected-clocks = <GCC_QSPI_CORE_CLK>,
413 <GCC_QSPI_CORE_CLK_SRC>,
414 <GCC_QSPI_CNOC_PERIPH_AHB_CLK>,
415 <GCC_LPASS_Q6_AXI_CLK>,
416 <GCC_LPASS_SWAY_CLK>;
417 };
418
419 &gpi_dma0 {
420 status = "okay";
421 };
422
423 &gpi_dma1 {
424 status = "okay";
425 };
426
427 &gpu {
428 status = "okay";
429 };
430
431 &gpu_zap_shader {
432 firmware-name = "qcom/sdm845/Sony/tama/a630_zap.mbn";
433 };
434
435 &i2c5 {
436 clock-frequency = <400000>;
437 status = "okay";
438
439 touchscreen: touchscreen@2c {
440 compatible = "syna,rmi4-i2c";
441 reg = <0x2c>;
442
443 interrupts-extended = <&tlmm 125 IRQ_TYPE_EDGE_FALLING>;
444 vdd-supply = <&vreg_l14a_1p8>;
445 /*
446 * This is a blatant abuse of OF, but the panel driver *needs*
447 * to probe first, as the power/gpio switching needs to be precisely
448 * timed in order for both the display and touch panel to function properly.
449 */
450 incell-supply = <&panel>;
451
452 syna,reset-delay-ms = <220>;
453 syna,startup-delay-ms = <1000>;
454
455 pinctrl-0 = <&ts_default>;
456 pinctrl-1 = <&ts_sleep>;
457 pinctrl-names = "default", "sleep";
458
459 #address-cells = <1>;
460 #size-cells = <0>;
461
462 rmi4-f01@1 {
463 reg = <0x01>;
464 syna,nosleep-mode = <1>;
465 };
466
467 rmi4-f12@12 {
468 reg = <0x12>;
469 syna,sensor-type = <1>;
470 };
471 };
472 };
473
474 &i2c10 {
475 status = "okay";
476 clock-frequency = <400000>;
477
478 /* Qcom SMB1355 @ 8, c */
479 /* NXP PN547 NFC @ 28 */
480 /* Renesas IDTP9221 Qi charger @ 61 */
481 };
482
483 &i2c14 {
484 status = "okay";
485 clock-frequency = <400000>;
486
487 /* SONY ToF sensor @ 52 */
488 /* AMS TCS3490 RGB+IR color sensor @ 72 */
489 };
490
491 &ibb {
492 qcom,discharge-resistor-kohms = <300>;
493 regulator-min-microvolt = <5500000>;
494 regulator-max-microvolt = <5700000>;
495 regulator-min-microamp = <0>;
496 regulator-max-microamp = <800000>;
497 regulator-over-current-protection;
498 regulator-soft-start;
499 regulator-pull-down;
500 };
501
502 &lab {
503 regulator-min-microvolt = <5500000>;
504 regulator-max-microvolt = <5700000>;
505 regulator-min-microamp = <200000>;
506 regulator-max-microamp = <200000>;
507 regulator-over-current-protection;
508 regulator-soft-start;
509 regulator-pull-down;
510 };
511
512 &mdss {
513 status = "okay";
514 };
515
516 &mdss_dsi0 {
517 vdda-supply = <&vreg_l26a_1p2>;
518 status = "okay";
519
520 panel: panel@0 {
521 /* The compatible is assigned in device DTs. */
522 reg = <0>;
523
524 backlight = <&pmi8998_wled>;
525 vddio-supply = <&vreg_l14a_1p8>;
526 vsp-supply = <&lab>;
527 vsn-supply = <&ibb>;
528 panel-reset-gpios = <&tlmm 6 GPIO_ACTIVE_HIGH>;
529 touch-reset-gpios = <&tlmm 99 GPIO_ACTIVE_HIGH>;
530
531 pinctrl-0 = <&sde_dsi_active &sde_te_active_sleep>;
532 pinctrl-1 = <&sde_dsi_sleep &sde_te_active_sleep>;
533 pinctrl-names = "default", "sleep";
534
535 port {
536 panel_in: endpoint {
537 remote-endpoint = <&mdss_dsi0_out>;
538 };
539 };
540 };
541 };
542
543 &mdss_dsi0_out {
544 remote-endpoint = <&panel_in>;
545 data-lanes = <0 1 2 3>;
546 };
547
548 &mdss_dsi0_phy {
549 vdds-supply = <&vreg_l1a_0p9>;
550 status = "okay";
551 };
552
553 &pm8005_gpios {
554 gpio-line-names = "NC", /* GPIO_1 */
555 "NC",
556 "",
557 "";
558 };
559
560 &pm8998_gpios {
561 gpio-line-names = "NC", /* GPIO_1 */
562 "FOCUS_N",
563 "",
564 "NC",
565 "VOL_DOWN_N",
566 "VOL_UP_N",
567 "SNAPSHOT_N",
568 "NC",
569 "FLASH_THERM",
570 "NC", /* GPIO_10 */
571 "LCD_ID",
572 "RF_ID",
573 "NC",
574 "NC",
575 "NC",
576 "NC",
577 "NC",
578 "NC",
579 "NC",
580 "", /* GPIO_20 */
581 "NFC_CLK_REQ",
582 "",
583 "",
584 "",
585 "",
586 "";
587
588 focus_n: focus-n-state {
589 pins = "gpio2";
590 function = PMIC_GPIO_FUNC_NORMAL;
591 power-source = <0>;
592 bias-pull-up;
593 input-enable;
594 };
595
596 vol_down_n: vol-down-n-state {
597 pins = "gpio5";
598 function = PMIC_GPIO_FUNC_NORMAL;
599 power-source = <0>;
600 bias-pull-up;
601 input-enable;
602 };
603
604 vol_up_n: vol-up-n-state {
605 pins = "gpio6";
606 function = PMIC_GPIO_FUNC_NORMAL;
607 power-source = <0>;
608 bias-pull-up;
609 input-enable;
610 };
611
612 snapshot_n: snapshot-n-state {
613 pins = "gpio7";
614 function = PMIC_GPIO_FUNC_NORMAL;
615 power-source = <0>;
616 bias-pull-up;
617 input-enable;
618 };
619 };
620
621 &pmi8998_gpios {
622 cam_io_en: cam-io-en-state {
623 pins = "gpio12";
624 function = "normal";
625 qcom,drive-strength = <3>;
626 power-source = <0>;
627 drive-push-pull;
628 output-low;
629 };
630 };
631
632 &pmi8998_wled {
633 default-brightness = <800>;
634 qcom,switching-freq = <800>;
635 qcom,ovp-millivolt = <29600>;
636 qcom,current-boost-limit = <970>;
637 qcom,current-limit-microamp = <20000>;
638 qcom,enabled-strings = <0 1 2 3>;
639 status = "okay";
640 };
641
642 &qupv3_id_0 {
643 status = "okay";
644 };
645
646 &qupv3_id_1 {
647 status = "okay";
648 };
649
650 &sdhc_2 {
651 status = "okay";
652
653 vmmc-supply = <&vreg_l21a_2p7>;
654 vqmmc-supply = <&vreg_l13a_1p8>;
655 cd-gpios = <&tlmm 126 GPIO_ACTIVE_HIGH>;
656 pinctrl-0 = <&sdc2_default_state>;
657 pinctrl-names = "default";
658 bus-width = <4>;
659 no-sdio;
660 no-mmc;
661 };
662
663 &tlmm {
664 gpio-reserved-ranges = <0 4>, <81 4>;
665
666 sdc2_default_state: sdc2-default-state {
667 clk-pins {
668 pins = "sdc2_clk";
669 drive-strength = <16>;
670 bias-disable;
671 };
672
673 cmd-pins {
674 pins = "sdc2_cmd";
675 drive-strength = <10>;
676 bias-pull-up;
677 };
678
679 data-pins {
680 pins = "sdc2_data";
681 drive-strength = <10>;
682 bias-pull-up;
683 };
684 };
685
686 sde_dsi_active: sde-dsi-active-state {
687 pins = "gpio6";
688 function = "gpio";
689 drive-strength = <8>;
690 bias-disable;
691 };
692
693 sde_dsi_sleep: sde-dsi-sleep-state {
694 pins = "gpio6";
695 function = "gpio";
696 drive-strength = <2>;
697 bias-pull-down;
698 };
699
700 chat_cam_pwr_en: chat-cam-pwr-en-state {
701 pins = "gpio8";
702 function = "gpio";
703 drive-strength = <2>;
704 bias-disable;
705 output-low;
706 };
707
708 sde_te_active_sleep: sde-te-active-sleep-state {
709 pins = "gpio10";
710 function = "mdp_vsync";
711 drive-strength = <2>;
712 bias-pull-down;
713 };
714
715 main_cam_pwr_en: main-cam-pwr-en-state {
716 pins = "gpio27";
717 function = "gpio";
718 drive-strength = <2>;
719 bias-disable;
720 output-low;
721 };
722
723 ts_default: ts-default-state {
724 reset-pins {
725 pins = "gpio99";
726 function = "gpio";
727 drive-strength = <2>;
728 bias-pull-up;
729 };
730
731 int-pins {
732 pins = "gpio125";
733 function = "gpio";
734 drive-strength = <2>;
735 bias-pull-up;
736 };
737 };
738
739 ts_sleep: ts-sleep-state {
740 reset-pins {
741 pins = "gpio99";
742 function = "gpio";
743 drive-strength = <2>;
744 bias-pull-down;
745 };
746
747 int-pins {
748 pins = "gpio125";
749 function = "gpio";
750 drive-strength = <2>;
751 bias-pull-down;
752 };
753 };
754 };
755
756 &uart6 {
757 status = "okay";
758 };
759
760 &uart9 {
761 status = "okay";
762 };
763
764 /* BIG WARNING! DO NOT TOUCH UFS, YOUR DEVICE WILL DIE! */
765 &ufs_mem_hc { status = "disabled"; };
766 &ufs_mem_phy { status = "disabled"; };
767
768 &usb_1 {
769 status = "okay";
770
771 qcom,select-utmi-as-pipe-clk;
772 };
773
774 &usb_1_dwc3 {
775 dr_mode = "peripheral";
776
777 maximum-speed = "high-speed";
778 phys = <&usb_1_hsphy>;
779 phy-names = "usb2-phy";
780 };
781
782 &usb_1_hsphy {
783 status = "okay";
784
785 vdd-supply = <&vreg_l1a_0p9>;
786 vdda-pll-supply = <&vreg_l12a_1p8>;
787 vdda-phy-dpdm-supply = <&vreg_l24a_3p1>;
788 };
789
790 &venus {
791 firmware-name = "qcom/sdm845/Sony/tama/venus.mbn";
792 status = "okay";
793 };