| 1 |
// SPDX-License-Identifier: GPL-2.0 |
| 2 |
/* |
| 3 |
* SDM845 OnePlus 6 (enchilada) device tree. |
| 4 |
* |
| 5 |
* Copyright (c) 2020, The Linux Foundation. All rights reserved. |
| 6 |
*/ |
| 7 |
|
| 8 |
#include <dt-bindings/leds/common.h> |
| 9 |
#include "sdm845-oneplus-common.dtsi" |
| 10 |
|
| 11 |
/ { |
| 12 |
model = "OnePlus 6"; |
| 13 |
compatible = "oneplus,enchilada", "qcom,sdm845"; |
| 14 |
qcom,board-id = <8 0 17819 22>; |
| 15 |
|
| 16 |
battery: battery { |
| 17 |
compatible = "simple-battery"; |
| 18 |
|
| 19 |
charge-full-design-microamp-hours = <3300000>; |
| 20 |
voltage-min-design-microvolt = <3400000>; |
| 21 |
voltage-max-design-microvolt = <4400000>; |
| 22 |
|
| 23 |
/* |
| 24 |
* Typical designs have multiple charger ICs which can handle more |
| 25 |
* current but the OnePlus 6/T do not, hence the lower limit. This |
| 26 |
* does not apply when using the Dash Charger, however this is not |
| 27 |
* yet supported. |
| 28 |
*/ |
| 29 |
constant-charge-current-max-microamp = <1800000>; |
| 30 |
}; |
| 31 |
}; |
| 32 |
|
| 33 |
&bq27441_fg { |
| 34 |
monitored-battery = <&battery>; |
| 35 |
}; |
| 36 |
|
| 37 |
&display_panel { |
| 38 |
compatible = "samsung,sofef00-ams628nw01", "samsung,sofef00"; |
| 39 |
|
| 40 |
status = "okay"; |
| 41 |
}; |
| 42 |
|
| 43 |
&framebuffer { |
| 44 |
height = <2280>; |
| 45 |
}; |
| 46 |
|
| 47 |
&i2c4 { |
| 48 |
clock-frequency = <100000>; |
| 49 |
|
| 50 |
status = "okay"; |
| 51 |
|
| 52 |
max98927_codec: max98927@3a { |
| 53 |
compatible = "maxim,max98927"; |
| 54 |
reg = <0x3a>; |
| 55 |
#sound-dai-cells = <0>; |
| 56 |
|
| 57 |
pinctrl-0 = <&speaker_default>; |
| 58 |
pinctrl-names = "default"; |
| 59 |
|
| 60 |
reset-gpios = <&tlmm 69 GPIO_ACTIVE_LOW>; |
| 61 |
|
| 62 |
vmon-slot-no = <1>; |
| 63 |
imon-slot-no = <0>; |
| 64 |
}; |
| 65 |
}; |
| 66 |
|
| 67 |
&pmi8998_charger { |
| 68 |
monitored-battery = <&battery>; |
| 69 |
}; |
| 70 |
|
| 71 |
&pmi8998_lpg { |
| 72 |
status = "okay"; |
| 73 |
|
| 74 |
multi-led { |
| 75 |
color = <LED_COLOR_ID_RGB>; |
| 76 |
function = LED_FUNCTION_STATUS; |
| 77 |
|
| 78 |
#address-cells = <1>; |
| 79 |
#size-cells = <0>; |
| 80 |
|
| 81 |
led@3 { |
| 82 |
reg = <3>; |
| 83 |
color = <LED_COLOR_ID_BLUE>; |
| 84 |
}; |
| 85 |
|
| 86 |
led@4 { |
| 87 |
reg = <4>; |
| 88 |
color = <LED_COLOR_ID_GREEN>; |
| 89 |
}; |
| 90 |
|
| 91 |
led@5 { |
| 92 |
reg = <5>; |
| 93 |
color = <LED_COLOR_ID_RED>; |
| 94 |
}; |
| 95 |
}; |
| 96 |
}; |
| 97 |
|
| 98 |
&sound { |
| 99 |
model = "OnePlus 6"; |
| 100 |
audio-routing = "RX_BIAS", "MCLK", |
| 101 |
"AMIC2", "MIC BIAS2", |
| 102 |
"AMIC3", "MIC BIAS4", |
| 103 |
"AMIC4", "MIC BIAS1", |
| 104 |
"AMIC5", "MIC BIAS4"; |
| 105 |
}; |
| 106 |
|
| 107 |
&speaker_playback_dai { |
| 108 |
codec { |
| 109 |
sound-dai = <&max98927_codec>; |
| 110 |
}; |
| 111 |
}; |
| 112 |
|
| 113 |
&wcd9340 { |
| 114 |
qcom,micbias1-microvolt = <1800000>; |
| 115 |
qcom,micbias2-microvolt = <2700000>; |
| 116 |
qcom,micbias3-microvolt = <1800000>; |
| 117 |
qcom,micbias4-microvolt = <1800000>; |
| 118 |
}; |