| 1 |
// SPDX-License-Identifier: BSD-3-Clause |
| 2 |
/* |
| 3 |
* Copyright (c) 2022, Gabriela David |
| 4 |
*/ |
| 5 |
/dts-v1/; |
| 6 |
|
| 7 |
#include "sdm632.dtsi" |
| 8 |
#include "pm8953.dtsi" |
| 9 |
#include <dt-bindings/leds/common.h> |
| 10 |
|
| 11 |
/delete-node/ &cont_splash_mem; |
| 12 |
/delete-node/ &qseecom_mem; |
| 13 |
|
| 14 |
/ { |
| 15 |
model = "Motorola G7 Power"; |
| 16 |
compatible = "motorola,ocean", "qcom,sdm632"; |
| 17 |
chassis-type = "handset"; |
| 18 |
qcom,msm-id = <349 0>; |
| 19 |
qcom,board-id = <0x141 0xc100>; |
| 20 |
qcom,pmic-id = <0x10016 0x25 0x00 0x00>; |
| 21 |
|
| 22 |
backlight: backlight { |
| 23 |
compatible = "led-backlight"; |
| 24 |
leds = <&led>; |
| 25 |
}; |
| 26 |
|
| 27 |
chosen { |
| 28 |
#address-cells = <2>; |
| 29 |
#size-cells = <2>; |
| 30 |
ranges; |
| 31 |
|
| 32 |
framebuffer@90001000 { |
| 33 |
compatible = "simple-framebuffer"; |
| 34 |
reg = <0 0x90001000 0 (720 * 1520 * 3)>; |
| 35 |
|
| 36 |
width = <720>; |
| 37 |
height = <1520>; |
| 38 |
stride = <(720 * 3)>; |
| 39 |
format = "r8g8b8"; |
| 40 |
|
| 41 |
power-domains = <&gcc MDSS_GDSC>; |
| 42 |
|
| 43 |
clocks = <&gcc GCC_MDSS_AHB_CLK>, |
| 44 |
<&gcc GCC_MDSS_AXI_CLK>, |
| 45 |
<&gcc GCC_MDSS_VSYNC_CLK>, |
| 46 |
<&gcc GCC_MDSS_MDP_CLK>, |
| 47 |
<&gcc GCC_MDSS_BYTE0_CLK>, |
| 48 |
<&gcc GCC_MDSS_PCLK0_CLK>, |
| 49 |
<&gcc GCC_MDSS_ESC0_CLK>; |
| 50 |
}; |
| 51 |
}; |
| 52 |
|
| 53 |
gpio-keys { |
| 54 |
compatible = "gpio-keys"; |
| 55 |
|
| 56 |
pinctrl-names = "default"; |
| 57 |
pinctrl-0 = <&gpio_key_default>; |
| 58 |
|
| 59 |
key-volume-up { |
| 60 |
label = "Volume Up"; |
| 61 |
gpios = <&tlmm 85 GPIO_ACTIVE_LOW>; |
| 62 |
linux,code = <KEY_VOLUMEUP>; |
| 63 |
}; |
| 64 |
}; |
| 65 |
|
| 66 |
reserved-memory { |
| 67 |
qseecom_mem: qseecom@84300000 { |
| 68 |
reg = <0x0 0x84300000 0x0 0x2000000>; |
| 69 |
no-map; |
| 70 |
}; |
| 71 |
|
| 72 |
cont_splash_mem: cont-splash@90001000 { |
| 73 |
reg = <0x0 0x90001000 0x0 (720 * 1520 * 3)>; |
| 74 |
no-map; |
| 75 |
}; |
| 76 |
|
| 77 |
reserved@eefa1800 { |
| 78 |
reg = <0x00 0xeefa1800 0x00 0x5e800>; |
| 79 |
no-map; |
| 80 |
}; |
| 81 |
|
| 82 |
ramoops@ef000000 { |
| 83 |
compatible = "ramoops"; |
| 84 |
reg = <0x0 0xef000000 0x0 0xbf800>; |
| 85 |
console-size = <0x40000>; |
| 86 |
pmsg-size = <0x40000>; |
| 87 |
record-size = <0x3f800>; |
| 88 |
}; |
| 89 |
}; |
| 90 |
|
| 91 |
vph_pwr: vph-pwr-regulator { |
| 92 |
compatible = "regulator-fixed"; |
| 93 |
regulator-name = "vph_pwr"; |
| 94 |
regulator-always-on; |
| 95 |
regulator-boot-on; |
| 96 |
}; |
| 97 |
}; |
| 98 |
|
| 99 |
&hsusb_phy { |
| 100 |
vdd-supply = <&pm8953_l3>; |
| 101 |
vdda-pll-supply = <&pm8953_l7>; |
| 102 |
vdda-phy-dpdm-supply = <&pm8953_l13>; |
| 103 |
|
| 104 |
status = "okay"; |
| 105 |
}; |
| 106 |
|
| 107 |
&i2c_3 { |
| 108 |
status = "okay"; |
| 109 |
|
| 110 |
touchscreen@41 { |
| 111 |
compatible = "ilitek,ili2117"; |
| 112 |
reg = <0x41>; |
| 113 |
|
| 114 |
interrupt-parent = <&tlmm>; |
| 115 |
interrupts = <65 IRQ_TYPE_EDGE_FALLING>; |
| 116 |
|
| 117 |
touchscreen-inverted-x; |
| 118 |
}; |
| 119 |
}; |
| 120 |
|
| 121 |
&i2c_5 { |
| 122 |
status = "okay"; |
| 123 |
|
| 124 |
led-controller@36 { |
| 125 |
compatible = "ti,lm3697"; |
| 126 |
reg = <0x36>; |
| 127 |
|
| 128 |
#address-cells = <1>; |
| 129 |
#size-cells = <0>; |
| 130 |
|
| 131 |
led: led@1 { |
| 132 |
reg = <1>; |
| 133 |
default-trigger = "backlight"; |
| 134 |
function = LED_FUNCTION_BACKLIGHT; |
| 135 |
led-sources = <0 1 2>; |
| 136 |
}; |
| 137 |
}; |
| 138 |
}; |
| 139 |
|
| 140 |
&pm8953_resin { |
| 141 |
linux,code = <KEY_VOLUMEDOWN>; |
| 142 |
status = "okay"; |
| 143 |
}; |
| 144 |
|
| 145 |
&rpm_requests { |
| 146 |
regulators { |
| 147 |
compatible = "qcom,rpm-pm8953-regulators"; |
| 148 |
|
| 149 |
vdd_l1-supply = <&pm8953_s3>; |
| 150 |
vdd_l2_l3-supply = <&pm8953_s3>; |
| 151 |
vdd_l4_l5_l6_l7_l16_l19-supply = <&pm8953_s4>; |
| 152 |
vdd_l8_l11_l12_l13_l14_l15-supply = <&vph_pwr>; |
| 153 |
vdd_l9_l10_l17_l18_l22-supply = <&vph_pwr>; |
| 154 |
|
| 155 |
pm8953_s3: s3 { |
| 156 |
regulator-min-microvolt = <984000>; |
| 157 |
regulator-max-microvolt = <1240000>; |
| 158 |
}; |
| 159 |
|
| 160 |
pm8953_s4: s4 { |
| 161 |
regulator-min-microvolt = <1036000>; |
| 162 |
regulator-max-microvolt = <2040000>; |
| 163 |
}; |
| 164 |
|
| 165 |
pm8953_l1: l1 { |
| 166 |
regulator-min-microvolt = <975000>; |
| 167 |
regulator-max-microvolt = <1050000>; |
| 168 |
}; |
| 169 |
|
| 170 |
pm8953_l2: l2 { |
| 171 |
regulator-min-microvolt = <975000>; |
| 172 |
regulator-max-microvolt = <1175000>; |
| 173 |
}; |
| 174 |
|
| 175 |
pm8953_l3: l3 { |
| 176 |
regulator-min-microvolt = <925000>; |
| 177 |
regulator-max-microvolt = <925000>; |
| 178 |
regulator-allow-set-load; |
| 179 |
}; |
| 180 |
|
| 181 |
pm8953_l5: l5 { |
| 182 |
regulator-min-microvolt = <1800000>; |
| 183 |
regulator-max-microvolt = <1800000>; |
| 184 |
}; |
| 185 |
|
| 186 |
pm8953_l6: l6 { |
| 187 |
regulator-min-microvolt = <1800000>; |
| 188 |
regulator-max-microvolt = <1800000>; |
| 189 |
regulator-always-on; |
| 190 |
regulator-boot-on; |
| 191 |
}; |
| 192 |
|
| 193 |
pm8953_l7: l7 { |
| 194 |
regulator-min-microvolt = <1800000>; |
| 195 |
regulator-max-microvolt = <1900000>; |
| 196 |
}; |
| 197 |
|
| 198 |
pm8953_l8: l8 { |
| 199 |
regulator-min-microvolt = <2900000>; |
| 200 |
regulator-max-microvolt = <2900000>; |
| 201 |
}; |
| 202 |
|
| 203 |
pm8953_l9: l9 { |
| 204 |
regulator-min-microvolt = <3000000>; |
| 205 |
regulator-max-microvolt = <3300000>; |
| 206 |
}; |
| 207 |
|
| 208 |
pm8953_l10: l10 { |
| 209 |
regulator-min-microvolt = <2800000>; |
| 210 |
regulator-max-microvolt = <3000000>; |
| 211 |
}; |
| 212 |
|
| 213 |
pm8953_l11: l11 { |
| 214 |
regulator-min-microvolt = <2950000>; |
| 215 |
regulator-max-microvolt = <2950000>; |
| 216 |
}; |
| 217 |
|
| 218 |
pm8953_l12: l12 { |
| 219 |
regulator-min-microvolt = <1800000>; |
| 220 |
regulator-max-microvolt = <2950000>; |
| 221 |
}; |
| 222 |
|
| 223 |
pm8953_l13: l13 { |
| 224 |
regulator-min-microvolt = <3125000>; |
| 225 |
regulator-max-microvolt = <3125000>; |
| 226 |
}; |
| 227 |
|
| 228 |
pm8953_l16: l16 { |
| 229 |
regulator-min-microvolt = <1800000>; |
| 230 |
regulator-max-microvolt = <1800000>; |
| 231 |
}; |
| 232 |
|
| 233 |
pm8953_l17: l17 { |
| 234 |
regulator-min-microvolt = <2850000>; |
| 235 |
regulator-max-microvolt = <2850000>; |
| 236 |
}; |
| 237 |
|
| 238 |
pm8953_l18: l18 { |
| 239 |
regulator-min-microvolt = <1800000>; |
| 240 |
regulator-max-microvolt = <2700000>; |
| 241 |
regulator-always-on; |
| 242 |
regulator-boot-on; |
| 243 |
}; |
| 244 |
|
| 245 |
pm8953_l19: l19 { |
| 246 |
regulator-min-microvolt = <1200000>; |
| 247 |
regulator-max-microvolt = <1350000>; |
| 248 |
}; |
| 249 |
|
| 250 |
pm8953_l22: l22 { |
| 251 |
regulator-min-microvolt = <1800000>; |
| 252 |
regulator-max-microvolt = <1800000>; |
| 253 |
regulator-always-on; |
| 254 |
}; |
| 255 |
|
| 256 |
pm8953_l23: l23 { |
| 257 |
regulator-min-microvolt = <975000>; |
| 258 |
regulator-max-microvolt = <1225000>; |
| 259 |
}; |
| 260 |
}; |
| 261 |
}; |
| 262 |
|
| 263 |
&sdhc_1 { |
| 264 |
vmmc-supply = <&pm8953_l8>; |
| 265 |
vqmmc-supply = <&pm8953_l5>; |
| 266 |
|
| 267 |
status = "okay"; |
| 268 |
}; |
| 269 |
|
| 270 |
&sdhc_2 { |
| 271 |
vmmc-supply = <&pm8953_l11>; |
| 272 |
vqmmc-supply = <&pm8953_l12>; |
| 273 |
|
| 274 |
pinctrl-names = "default", "sleep"; |
| 275 |
pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>; |
| 276 |
pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>; |
| 277 |
|
| 278 |
status = "okay"; |
| 279 |
}; |
| 280 |
|
| 281 |
&tlmm { |
| 282 |
gpio-reserved-ranges = <96 4>; |
| 283 |
}; |
| 284 |
|
| 285 |
&usb3 { |
| 286 |
status = "okay"; |
| 287 |
}; |
| 288 |
|
| 289 |
&usb3_dwc3 { |
| 290 |
/delete-property/ usb-role-switch; |
| 291 |
dr_mode = "peripheral"; |
| 292 |
}; |