Debian Codegraph @

scripts/dtc/include-prefixes/arm64/qcom/sdm450-lenovo-tbx605f.dts

raw
1 // SPDX-License-Identifier: BSD-3-Clause
2 /*
3 * Copyright (c) 2024, Neil Armstrong <[email protected]>
4 */
5 /dts-v1/;
6
7 #include "sdm450.dtsi"
8 #include "pm8953.dtsi"
9 #include "pmi8950.dtsi"
10
11 / {
12 model = "Lenovo Smart Tab M10";
13 compatible = "lenovo,tbx605f", "qcom,sdm450";
14 chassis-type = "tablet";
15
16 chosen {
17 #address-cells = <2>;
18 #size-cells = <2>;
19 ranges;
20
21 framebuffer@90001000 {
22 compatible = "simple-framebuffer";
23 reg = <0 0x90001000 0 (1200 * 1920 * 3)>;
24
25 width = <1200>;
26 height = <1920>;
27 stride = <(1200 * 3)>;
28 format = "r8g8b8";
29
30 power-domains = <&gcc MDSS_GDSC>;
31
32 clocks = <&gcc GCC_MDSS_AHB_CLK>,
33 <&gcc GCC_MDSS_AXI_CLK>,
34 <&gcc GCC_MDSS_VSYNC_CLK>,
35 <&gcc GCC_MDSS_MDP_CLK>,
36 <&gcc GCC_MDSS_BYTE0_CLK>,
37 <&gcc GCC_MDSS_PCLK0_CLK>,
38 <&gcc GCC_MDSS_ESC0_CLK>;
39 };
40 };
41
42 reserved-memory {
43 other-ext-region@0 {
44 no-map;
45 reg = <0x00 0x84500000 0x00 0x2300000>;
46 };
47 };
48
49 backlight: gpio-backlight {
50 compatible = "gpio-backlight";
51
52 gpios = <&tlmm 16 GPIO_ACTIVE_HIGH>;
53
54 default-on;
55
56 pinctrl-names = "default";
57 pinctrl-0 = <&backlight_enable_active>;
58 pinctrl-1 = <&backlight_enable_sleep>;
59 };
60
61 gpio-keys {
62 compatible = "gpio-keys";
63 key-volume-up {
64 label = "volume_up";
65 gpios = <&tlmm 85 GPIO_ACTIVE_LOW>;
66 linux,code = <KEY_VOLUMEUP>;
67 };
68 };
69
70 vph_pwr: vph-pwr-regulator {
71 compatible = "regulator-fixed";
72 regulator-name = "vph_pwr";
73 regulator-always-on;
74 regulator-boot-on;
75 };
76 };
77
78 &mdss {
79 status = "okay";
80 };
81
82 &mdss_dsi0 {
83 vdda-supply = <&pm8953_s3>;
84 vddio-supply = <&pm8953_l6>;
85
86 status = "okay";
87
88 panel@0 {
89 compatible = "boe,tv101wum-ll2";
90 reg = <0>;
91
92 vsp-supply = <&lab>;
93 vsn-supply = <&ibb>;
94 reset-gpios = <&tlmm 61 GPIO_ACTIVE_LOW>;
95
96 backlight = <&backlight>;
97
98 pinctrl-names = "default";
99 pinctrl-0 = <&panel_reset_active>;
100 pinctrl-1 = <&panel_reset_sleep>;
101
102 port {
103 panel_in: endpoint {
104 remote-endpoint = <&mdss_dsi0_out>;
105 };
106 };
107 };
108 };
109
110 &mdss_dsi0_out {
111 remote-endpoint = <&panel_in>;
112 data-lanes = <0 1 2 3>;
113 };
114
115 &mdss_dsi0_phy {
116 vcca-supply = <&pm8953_l3>;
117
118 status = "okay";
119 };
120
121 &hsusb_phy {
122 vdd-supply = <&pm8953_l3>;
123 vdda-pll-supply = <&pm8953_l7>;
124 vdda-phy-dpdm-supply = <&pm8953_l13>;
125
126 status = "okay";
127 };
128
129 &i2c_3 {
130 status = "okay";
131
132 touchscreen@38 {
133 compatible = "edt,edt-ft5506";
134 reg = <0x38>;
135 interrupt-parent = <&tlmm>;
136 interrupts = <65 IRQ_TYPE_EDGE_FALLING>;
137 vcc-supply = <&pm8953_l10>;
138
139 pinctrl-names = "default";
140 pinctrl-0 = <&ts_int_active &ts_reset_active>;
141
142 reset-gpios = <&tlmm 64 GPIO_ACTIVE_LOW>;
143 touchscreen-size-x = <1200>;
144 touchscreen-size-y = <1920>;
145 };
146 };
147
148 &ibb {
149 regulator-min-microvolt = <4600000>;
150 regulator-max-microvolt = <6000000>;
151 qcom,discharge-resistor-kohms = <32>;
152 };
153
154 &lab {
155 regulator-min-microvolt = <4600000>;
156 regulator-max-microvolt = <6000000>;
157 qcom,soft-start-us = <800>;
158 };
159
160 &pm8953_resin {
161 linux,code = <KEY_VOLUMEDOWN>;
162 status = "okay";
163 };
164
165 &rpm_requests {
166 regulators {
167 compatible = "qcom,rpm-pm8953-regulators";
168
169 vdd_s1-supply = <&vph_pwr>;
170 vdd_s2-supply = <&vph_pwr>;
171 vdd_s3-supply = <&vph_pwr>;
172 vdd_s4-supply = <&vph_pwr>;
173 vdd_s5-supply = <&vph_pwr>;
174 vdd_s6-supply = <&vph_pwr>;
175 vdd_s7-supply = <&vph_pwr>;
176 vdd_l1-supply = <&pm8953_s3>;
177 vdd_l2_l3-supply = <&pm8953_s3>;
178 vdd_l4_l5_l6_l7_l16_l19-supply = <&pm8953_s4>;
179 vdd_l8_l11_l12_l13_l14_l15-supply = <&vph_pwr>;
180 vdd_l9_l10_l17_l18_l22-supply = <&vph_pwr>;
181
182 pm8953_s1: s1 {
183 regulator-min-microvolt = <870000>;
184 regulator-max-microvolt = <1156000>;
185 };
186
187 pm8953_s3: s3 {
188 regulator-min-microvolt = <1224000>;
189 regulator-max-microvolt = <1224000>;
190 };
191
192 pm8953_s4: s4 {
193 regulator-min-microvolt = <1900000>;
194 regulator-max-microvolt = <2050000>;
195 };
196
197 pm8953_l1: l1 {
198 regulator-min-microvolt = <1000000>;
199 regulator-max-microvolt = <1100000>;
200 };
201
202 pm8953_l2: l2 {
203 regulator-min-microvolt = <975000>;
204 regulator-max-microvolt = <1225000>;
205 };
206
207 pm8953_l3: l3 {
208 regulator-min-microvolt = <925000>;
209 regulator-max-microvolt = <925000>;
210 };
211
212 pm8953_l5: l5 {
213 regulator-min-microvolt = <1800000>;
214 regulator-max-microvolt = <1800000>;
215 };
216
217 pm8953_l6: l6 {
218 regulator-min-microvolt = <1800000>;
219 regulator-max-microvolt = <1800000>;
220 };
221
222 pm8953_l7: l7 {
223 regulator-min-microvolt = <1800000>;
224 regulator-max-microvolt = <1900000>;
225 };
226
227 pm8953_l8: l8 {
228 regulator-min-microvolt = <2900000>;
229 regulator-max-microvolt = <2900000>;
230 };
231
232 pm8953_l9: l9 {
233 regulator-min-microvolt = <3000000>;
234 regulator-max-microvolt = <3300000>;
235 };
236
237 pm8953_l10: l10 {
238 regulator-min-microvolt = <2850000>;
239 regulator-max-microvolt = <2850000>;
240 };
241
242 pm8953_l11: l11 {
243 regulator-min-microvolt = <3300000>;
244 regulator-max-microvolt = <3300000>;
245 };
246
247 pm8953_l12: l12 {
248 regulator-min-microvolt = <2950000>;
249 regulator-max-microvolt = <2950000>;
250 };
251
252 pm8953_l13: l13 {
253 regulator-min-microvolt = <3125000>;
254 regulator-max-microvolt = <3125000>;
255 };
256
257 pm8953_l16: l16 {
258 regulator-min-microvolt = <1800000>;
259 regulator-max-microvolt = <1800000>;
260 };
261
262 pm8953_l17: l17 {
263 regulator-min-microvolt = <2850000>;
264 regulator-max-microvolt = <2850000>;
265 };
266
267 pm8953_l19: l19 {
268 regulator-min-microvolt = <1200000>;
269 regulator-max-microvolt = <1350000>;
270 };
271
272 pm8953_l22: l22 {
273 regulator-min-microvolt = <2800000>;
274 regulator-max-microvolt = <2850000>;
275 };
276
277 pm8953_l23: l23 {
278 regulator-min-microvolt = <975000>;
279 regulator-max-microvolt = <1225000>;
280 };
281 };
282 };
283
284 &sdhc_1 {
285 vmmc-supply = <&pm8953_l8>;
286 vqmmc-supply = <&pm8953_l5>;
287
288 status = "okay";
289 };
290
291 &sdhc_2 {
292 vmmc-supply = <&pm8953_l11>;
293 vqmmc-supply = <&pm8953_l12>;
294
295 cd-gpios = <&tlmm 133 GPIO_ACTIVE_LOW>;
296
297 pinctrl-names = "default", "sleep";
298 pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_off>;
299 pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>;
300
301 status = "okay";
302 };
303
304 &tlmm {
305 gpio-reserved-ranges = <0 4>, <135 4>;
306
307 backlight_enable_active: backlight-enable-active-state {
308 pins = "gpio16";
309 function = "gpio";
310 drive-strength = <8>;
311 bias-disable;
312 output-high;
313 };
314
315 backlight_enable_sleep: backlight-enable-sleep-state {
316 pins = "gpio16";
317 function = "gpio";
318 drive-strength = <2>;
319 bias-pull-down;
320 };
321
322 panel_reset_active: panel-reset-active-state {
323 pins = "gpio61";
324 function = "gpio";
325 drive-strength = <8>;
326 bias-disable;
327 output-high;
328 };
329
330 panel_reset_sleep: panel-reset-sleep-state {
331 pins = "gpio61";
332 function = "gpio";
333 drive-strength = <2>;
334 bias-pull-down;
335 };
336
337 ts_int_active: ts-int-active-state {
338 pins = "gpio65";
339 function = "gpio";
340 drive-strength = <8>;
341 bias-pull-up;
342 };
343
344 ts_reset_active: ts-reset-active-state {
345 pins = "gpio64";
346 function = "gpio";
347 drive-strength = <0x08>;
348 bias-pull-up;
349 };
350 };
351
352 &usb3 {
353 status = "okay";
354 };
355
356 &usb3_dwc3 {
357 dr_mode = "peripheral";
358 };
359
360 &wcnss {
361 vddpx-supply = <&pm8953_l5>;
362
363 status = "okay";
364 };
365
366 &wcnss_iris {
367 compatible = "qcom,wcn3660b";
368
369 vddxo-supply = <&pm8953_l7>;
370 vddrfa-supply = <&pm8953_l19>;
371 vddpa-supply = <&pm8953_l9>;
372 vdddig-supply = <&pm8953_l5>;
373 };