| 1 |
// SPDX-License-Identifier: BSD-3-Clause |
| 2 |
/* |
| 3 |
* Copyright (c) 2022, Linaro Limited |
| 4 |
*/ |
| 5 |
|
| 6 |
#include <dt-bindings/iio/qcom,spmi-adc7-pm8350.h> |
| 7 |
#include <dt-bindings/iio/qcom,spmi-adc7-pmk8350.h> |
| 8 |
#include <dt-bindings/iio/qcom,spmi-adc7-pmr735a.h> |
| 9 |
#include <dt-bindings/input/input.h> |
| 10 |
#include <dt-bindings/interrupt-controller/irq.h> |
| 11 |
#include <dt-bindings/spmi/spmi.h> |
| 12 |
|
| 13 |
/ { |
| 14 |
thermal-zones { |
| 15 |
pm8280_1_thermal: pm8280-1-thermal { |
| 16 |
polling-delay-passive = <100>; |
| 17 |
|
| 18 |
thermal-sensors = <&pm8280_1_temp_alarm>; |
| 19 |
|
| 20 |
trips { |
| 21 |
trip0 { |
| 22 |
temperature = <95000>; |
| 23 |
hysteresis = <0>; |
| 24 |
type = "passive"; |
| 25 |
}; |
| 26 |
|
| 27 |
trip1 { |
| 28 |
temperature = <115000>; |
| 29 |
hysteresis = <0>; |
| 30 |
type = "critical"; |
| 31 |
}; |
| 32 |
}; |
| 33 |
}; |
| 34 |
|
| 35 |
pmc8280c_thermal: pmc8280c-thermal { |
| 36 |
polling-delay-passive = <100>; |
| 37 |
|
| 38 |
thermal-sensors = <&pmc8280c_temp_alarm>; |
| 39 |
|
| 40 |
trips { |
| 41 |
trip0 { |
| 42 |
temperature = <95000>; |
| 43 |
hysteresis = <0>; |
| 44 |
type = "passive"; |
| 45 |
}; |
| 46 |
|
| 47 |
trip1 { |
| 48 |
temperature = <115000>; |
| 49 |
hysteresis = <0>; |
| 50 |
type = "critical"; |
| 51 |
}; |
| 52 |
}; |
| 53 |
}; |
| 54 |
|
| 55 |
pm8280_2_thermal: pm8280-2-thermal { |
| 56 |
polling-delay-passive = <100>; |
| 57 |
|
| 58 |
thermal-sensors = <&pm8280_2_temp_alarm>; |
| 59 |
|
| 60 |
trips { |
| 61 |
trip0 { |
| 62 |
temperature = <95000>; |
| 63 |
hysteresis = <0>; |
| 64 |
type = "passive"; |
| 65 |
}; |
| 66 |
|
| 67 |
trip1 { |
| 68 |
temperature = <115000>; |
| 69 |
hysteresis = <0>; |
| 70 |
type = "critical"; |
| 71 |
}; |
| 72 |
}; |
| 73 |
}; |
| 74 |
|
| 75 |
pmr735a_thermal: pmr735a-thermal { |
| 76 |
polling-delay-passive = <100>; |
| 77 |
|
| 78 |
thermal-sensors = <&pmr735a_temp_alarm>; |
| 79 |
|
| 80 |
trips { |
| 81 |
trip0 { |
| 82 |
temperature = <95000>; |
| 83 |
hysteresis = <0>; |
| 84 |
type = "passive"; |
| 85 |
}; |
| 86 |
|
| 87 |
trip1 { |
| 88 |
temperature = <115000>; |
| 89 |
hysteresis = <0>; |
| 90 |
type = "critical"; |
| 91 |
}; |
| 92 |
}; |
| 93 |
}; |
| 94 |
}; |
| 95 |
}; |
| 96 |
|
| 97 |
&spmi_bus { |
| 98 |
pmk8280: pmic@0 { |
| 99 |
compatible = "qcom,pmk8350", "qcom,spmi-pmic"; |
| 100 |
reg = <0x0 SPMI_USID>; |
| 101 |
#address-cells = <1>; |
| 102 |
#size-cells = <0>; |
| 103 |
|
| 104 |
pmk8280_pon: pon@1300 { |
| 105 |
compatible = "qcom,pmk8350-pon"; |
| 106 |
reg = <0x1300>, <0x800>; |
| 107 |
reg-names = "hlos", "pbs"; |
| 108 |
|
| 109 |
pmk8280_pon_pwrkey: pwrkey { |
| 110 |
compatible = "qcom,pmk8350-pwrkey"; |
| 111 |
interrupts-extended = <&spmi_bus 0x0 0x13 0x7 IRQ_TYPE_EDGE_BOTH>; |
| 112 |
linux,code = <KEY_POWER>; |
| 113 |
status = "disabled"; |
| 114 |
}; |
| 115 |
|
| 116 |
pmk8280_pon_resin: resin { |
| 117 |
compatible = "qcom,pmk8350-resin"; |
| 118 |
interrupts-extended = <&spmi_bus 0x0 0x13 0x6 IRQ_TYPE_EDGE_BOTH>; |
| 119 |
status = "disabled"; |
| 120 |
}; |
| 121 |
}; |
| 122 |
|
| 123 |
pmk8280_vadc: adc@3100 { |
| 124 |
compatible = "qcom,spmi-adc7"; |
| 125 |
reg = <0x3100>; |
| 126 |
interrupts-extended = <&spmi_bus 0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>; |
| 127 |
#address-cells = <1>; |
| 128 |
#size-cells = <0>; |
| 129 |
#io-channel-cells = <1>; |
| 130 |
|
| 131 |
channel@3 { |
| 132 |
reg = <PMK8350_ADC7_DIE_TEMP>; |
| 133 |
qcom,pre-scaling = <1 1>; |
| 134 |
label = "pmk8350_die_temp"; |
| 135 |
}; |
| 136 |
|
| 137 |
channel@44 { |
| 138 |
reg = <PMK8350_ADC7_AMUX_THM1_100K_PU>; |
| 139 |
qcom,hw-settle-time = <200>; |
| 140 |
qcom,ratiometric; |
| 141 |
label = "pmk8350_xo_therm"; |
| 142 |
}; |
| 143 |
|
| 144 |
channel@103 { |
| 145 |
reg = <PM8350_ADC7_DIE_TEMP(1)>; |
| 146 |
qcom,pre-scaling = <1 1>; |
| 147 |
label = "pmc8280_1_die_temp"; |
| 148 |
}; |
| 149 |
|
| 150 |
channel@303 { |
| 151 |
reg = <PM8350_ADC7_DIE_TEMP(3)>; |
| 152 |
qcom,pre-scaling = <1 1>; |
| 153 |
label = "pmc8280_2_die_temp"; |
| 154 |
}; |
| 155 |
|
| 156 |
channel@403 { |
| 157 |
reg = <PMR735A_ADC7_DIE_TEMP>; |
| 158 |
qcom,pre-scaling = <1 1>; |
| 159 |
label = "pmr735a_die_temp"; |
| 160 |
}; |
| 161 |
}; |
| 162 |
|
| 163 |
pmk8280_adc_tm: adc-tm@3400 { |
| 164 |
compatible = "qcom,spmi-adc-tm5-gen2"; |
| 165 |
reg = <0x3400>; |
| 166 |
interrupts-extended = <&spmi_bus 0x0 0x34 0x0 IRQ_TYPE_EDGE_RISING>; |
| 167 |
#address-cells = <1>; |
| 168 |
#size-cells = <0>; |
| 169 |
#thermal-sensor-cells = <1>; |
| 170 |
status = "disabled"; |
| 171 |
}; |
| 172 |
|
| 173 |
pmk8280_rtc: rtc@6100 { |
| 174 |
compatible = "qcom,pmk8350-rtc"; |
| 175 |
reg = <0x6100>, <0x6200>; |
| 176 |
reg-names = "rtc", "alarm"; |
| 177 |
interrupts-extended = <&spmi_bus 0x0 0x62 0x1 IRQ_TYPE_EDGE_RISING>; |
| 178 |
wakeup-source; |
| 179 |
status = "disabled"; |
| 180 |
}; |
| 181 |
|
| 182 |
pmk8280_sdam_6: nvram@8500 { |
| 183 |
compatible = "qcom,spmi-sdam"; |
| 184 |
reg = <0x8500>; |
| 185 |
#address-cells = <1>; |
| 186 |
#size-cells = <1>; |
| 187 |
ranges = <0 0x8500 0x100>; |
| 188 |
status = "disabled"; |
| 189 |
}; |
| 190 |
}; |
| 191 |
|
| 192 |
pmc8280_1: pmic@1 { |
| 193 |
compatible = "qcom,pm8350", "qcom,spmi-pmic"; |
| 194 |
reg = <0x1 SPMI_USID>; |
| 195 |
#address-cells = <1>; |
| 196 |
#size-cells = <0>; |
| 197 |
|
| 198 |
pm8280_1_temp_alarm: temp-alarm@a00 { |
| 199 |
compatible = "qcom,spmi-temp-alarm"; |
| 200 |
reg = <0xa00>; |
| 201 |
interrupts-extended = <&spmi_bus 0x1 0xa 0x0 IRQ_TYPE_EDGE_BOTH>; |
| 202 |
io-channels = <&pmk8280_vadc PM8350_ADC7_DIE_TEMP(1)>; |
| 203 |
io-channel-names = "thermal"; |
| 204 |
#thermal-sensor-cells = <0>; |
| 205 |
}; |
| 206 |
|
| 207 |
pmc8280_1_gpios: gpio@8800 { |
| 208 |
compatible = "qcom,pm8350-gpio", "qcom,spmi-gpio"; |
| 209 |
reg = <0x8800>; |
| 210 |
gpio-controller; |
| 211 |
gpio-ranges = <&pmc8280_1_gpios 0 0 10>; |
| 212 |
#gpio-cells = <2>; |
| 213 |
interrupt-controller; |
| 214 |
#interrupt-cells = <2>; |
| 215 |
}; |
| 216 |
}; |
| 217 |
|
| 218 |
pmc8280c: pmic@2 { |
| 219 |
compatible = "qcom,pm8350c", "qcom,spmi-pmic"; |
| 220 |
reg = <0x2 SPMI_USID>; |
| 221 |
#address-cells = <1>; |
| 222 |
#size-cells = <0>; |
| 223 |
|
| 224 |
pmc8280c_temp_alarm: temp-alarm@a00 { |
| 225 |
compatible = "qcom,spmi-temp-alarm"; |
| 226 |
reg = <0xa00>; |
| 227 |
interrupts-extended = <&spmi_bus 0x2 0xa 0x0 IRQ_TYPE_EDGE_BOTH>; |
| 228 |
#thermal-sensor-cells = <0>; |
| 229 |
}; |
| 230 |
|
| 231 |
pmc8280c_gpios: gpio@8800 { |
| 232 |
compatible = "qcom,pm8350c-gpio", "qcom,spmi-gpio"; |
| 233 |
reg = <0x8800>; |
| 234 |
gpio-controller; |
| 235 |
gpio-ranges = <&pmc8280c_gpios 0 0 9>; |
| 236 |
#gpio-cells = <2>; |
| 237 |
interrupt-controller; |
| 238 |
#interrupt-cells = <2>; |
| 239 |
}; |
| 240 |
|
| 241 |
pmc8280c_lpg: pwm { |
| 242 |
compatible = "qcom,pm8350c-pwm"; |
| 243 |
|
| 244 |
#address-cells = <1>; |
| 245 |
#size-cells = <0>; |
| 246 |
|
| 247 |
#pwm-cells = <2>; |
| 248 |
|
| 249 |
status = "disabled"; |
| 250 |
}; |
| 251 |
}; |
| 252 |
|
| 253 |
pmc8280_2: pmic@3 { |
| 254 |
compatible = "qcom,pm8350", "qcom,spmi-pmic"; |
| 255 |
reg = <0x3 SPMI_USID>; |
| 256 |
#address-cells = <1>; |
| 257 |
#size-cells = <0>; |
| 258 |
|
| 259 |
pm8280_2_temp_alarm: temp-alarm@a00 { |
| 260 |
compatible = "qcom,spmi-temp-alarm"; |
| 261 |
reg = <0xa00>; |
| 262 |
interrupts-extended = <&spmi_bus 0x3 0xa 0x0 IRQ_TYPE_EDGE_BOTH>; |
| 263 |
io-channels = <&pmk8280_vadc PM8350_ADC7_DIE_TEMP(3)>; |
| 264 |
io-channel-names = "thermal"; |
| 265 |
#thermal-sensor-cells = <0>; |
| 266 |
}; |
| 267 |
|
| 268 |
pmc8280_2_gpios: gpio@8800 { |
| 269 |
compatible = "qcom,pm8350-gpio", "qcom,spmi-gpio"; |
| 270 |
reg = <0x8800>; |
| 271 |
gpio-controller; |
| 272 |
gpio-ranges = <&pmc8280_2_gpios 0 0 10>; |
| 273 |
#gpio-cells = <2>; |
| 274 |
interrupt-controller; |
| 275 |
#interrupt-cells = <2>; |
| 276 |
}; |
| 277 |
}; |
| 278 |
|
| 279 |
pmr735a: pmic@4 { |
| 280 |
compatible = "qcom,pmr735a", "qcom,spmi-pmic"; |
| 281 |
reg = <0x4 SPMI_USID>; |
| 282 |
#address-cells = <1>; |
| 283 |
#size-cells = <0>; |
| 284 |
|
| 285 |
pmr735a_temp_alarm: temp-alarm@a00 { |
| 286 |
compatible = "qcom,spmi-temp-alarm"; |
| 287 |
reg = <0xa00>; |
| 288 |
interrupts-extended = <&spmi_bus 0x4 0xa 0x0 IRQ_TYPE_EDGE_BOTH>; |
| 289 |
io-channels = <&pmk8280_vadc PMR735A_ADC7_DIE_TEMP>; |
| 290 |
io-channel-names = "thermal"; |
| 291 |
#thermal-sensor-cells = <0>; |
| 292 |
}; |
| 293 |
|
| 294 |
pmr735a_gpios: gpio@8800 { |
| 295 |
compatible = "qcom,pmr735a-gpio", "qcom,spmi-gpio"; |
| 296 |
reg = <0x8800>; |
| 297 |
gpio-controller; |
| 298 |
gpio-ranges = <&pmr735a_gpios 0 0 4>; |
| 299 |
#gpio-cells = <2>; |
| 300 |
interrupt-controller; |
| 301 |
#interrupt-cells = <2>; |
| 302 |
}; |
| 303 |
}; |
| 304 |
}; |