| 1 |
// SPDX-License-Identifier: BSD-3-Clause |
| 2 |
/* |
| 3 |
* Copyright (c) 2024, Jérôme de Bretagne <[email protected]> |
| 4 |
*/ |
| 5 |
|
| 6 |
/dts-v1/; |
| 7 |
|
| 8 |
#include <dt-bindings/gpio/gpio.h> |
| 9 |
#include <dt-bindings/regulator/qcom,rpmh-regulator.h> |
| 10 |
|
| 11 |
#include "sc8280xp.dtsi" |
| 12 |
#include "sc8280xp-pmics.dtsi" |
| 13 |
|
| 14 |
/ { |
| 15 |
model = "Microsoft Surface Pro 9 5G"; |
| 16 |
compatible = "microsoft,arcata", "qcom,sc8280xp"; |
| 17 |
|
| 18 |
aliases { |
| 19 |
serial0 = &uart18; |
| 20 |
serial1 = &uart2; |
| 21 |
}; |
| 22 |
|
| 23 |
wcd938x: audio-codec { |
| 24 |
compatible = "qcom,wcd9380-codec"; |
| 25 |
|
| 26 |
pinctrl-0 = <&wcd_default>; |
| 27 |
pinctrl-names = "default"; |
| 28 |
|
| 29 |
reset-gpios = <&tlmm 106 GPIO_ACTIVE_LOW>; |
| 30 |
|
| 31 |
vdd-buck-supply = <&vreg_s10b>; |
| 32 |
vdd-rxtx-supply = <&vreg_s10b>; |
| 33 |
vdd-io-supply = <&vreg_s10b>; |
| 34 |
vdd-mic-bias-supply = <&vreg_bob>; |
| 35 |
|
| 36 |
qcom,micbias1-microvolt = <1800000>; |
| 37 |
qcom,micbias2-microvolt = <1800000>; |
| 38 |
qcom,micbias3-microvolt = <1800000>; |
| 39 |
qcom,micbias4-microvolt = <1800000>; |
| 40 |
qcom,mbhc-buttons-vthreshold-microvolt = <75000 150000 237000 500000 500000 500000 500000 500000>; |
| 41 |
qcom,mbhc-headset-vthreshold-microvolt = <1700000>; |
| 42 |
qcom,mbhc-headphone-vthreshold-microvolt = <50000>; |
| 43 |
qcom,rx-device = <&wcd_rx>; |
| 44 |
qcom,tx-device = <&wcd_tx>; |
| 45 |
|
| 46 |
#sound-dai-cells = <1>; |
| 47 |
}; |
| 48 |
|
| 49 |
pmic-glink { |
| 50 |
compatible = "qcom,sc8280xp-pmic-glink", "qcom,pmic-glink"; |
| 51 |
|
| 52 |
#address-cells = <1>; |
| 53 |
#size-cells = <0>; |
| 54 |
|
| 55 |
/* Left-side top port */ |
| 56 |
connector@0 { |
| 57 |
compatible = "usb-c-connector"; |
| 58 |
reg = <0>; |
| 59 |
power-role = "dual"; |
| 60 |
data-role = "dual"; |
| 61 |
|
| 62 |
ports { |
| 63 |
#address-cells = <1>; |
| 64 |
#size-cells = <0>; |
| 65 |
|
| 66 |
port@0 { |
| 67 |
reg = <0>; |
| 68 |
|
| 69 |
pmic_glink_con0_hs: endpoint { |
| 70 |
remote-endpoint = <&usb_0_dwc3_hs>; |
| 71 |
}; |
| 72 |
}; |
| 73 |
|
| 74 |
port@1 { |
| 75 |
reg = <1>; |
| 76 |
|
| 77 |
pmic_glink_con0_ss: endpoint { |
| 78 |
remote-endpoint = <&usb_0_qmpphy_out>; |
| 79 |
}; |
| 80 |
}; |
| 81 |
|
| 82 |
port@2 { |
| 83 |
reg = <2>; |
| 84 |
|
| 85 |
pmic_glink_con0_sbu: endpoint { |
| 86 |
remote-endpoint = <&usb0_sbu_mux>; |
| 87 |
}; |
| 88 |
}; |
| 89 |
}; |
| 90 |
}; |
| 91 |
|
| 92 |
/* Left-side bottom port */ |
| 93 |
connector@1 { |
| 94 |
compatible = "usb-c-connector"; |
| 95 |
reg = <1>; |
| 96 |
power-role = "dual"; |
| 97 |
data-role = "dual"; |
| 98 |
|
| 99 |
ports { |
| 100 |
#address-cells = <1>; |
| 101 |
#size-cells = <0>; |
| 102 |
|
| 103 |
port@0 { |
| 104 |
reg = <0>; |
| 105 |
|
| 106 |
pmic_glink_con1_hs: endpoint { |
| 107 |
remote-endpoint = <&usb_1_dwc3_hs>; |
| 108 |
}; |
| 109 |
}; |
| 110 |
|
| 111 |
port@1 { |
| 112 |
reg = <1>; |
| 113 |
|
| 114 |
pmic_glink_con1_ss: endpoint { |
| 115 |
remote-endpoint = <&usb_1_qmpphy_out>; |
| 116 |
}; |
| 117 |
}; |
| 118 |
|
| 119 |
port@2 { |
| 120 |
reg = <2>; |
| 121 |
|
| 122 |
pmic_glink_con1_sbu: endpoint { |
| 123 |
remote-endpoint = <&usb1_sbu_mux>; |
| 124 |
}; |
| 125 |
}; |
| 126 |
}; |
| 127 |
}; |
| 128 |
}; |
| 129 |
|
| 130 |
vreg_nvme: regulator-nvme { |
| 131 |
compatible = "regulator-fixed"; |
| 132 |
|
| 133 |
regulator-name = "VCC3_SSD"; |
| 134 |
regulator-min-microvolt = <3300000>; |
| 135 |
regulator-max-microvolt = <3300000>; |
| 136 |
|
| 137 |
gpio = <&tlmm 135 GPIO_ACTIVE_HIGH>; |
| 138 |
enable-active-high; |
| 139 |
|
| 140 |
pinctrl-0 = <&nvme_reg_en>; |
| 141 |
pinctrl-names = "default"; |
| 142 |
|
| 143 |
regulator-boot-on; |
| 144 |
}; |
| 145 |
|
| 146 |
vreg_vph_pwr: regulator-vph-pwr { |
| 147 |
compatible = "regulator-fixed"; |
| 148 |
|
| 149 |
regulator-name = "VPH_VCC3R9"; |
| 150 |
regulator-min-microvolt = <3900000>; |
| 151 |
regulator-max-microvolt = <3900000>; |
| 152 |
|
| 153 |
regulator-always-on; |
| 154 |
}; |
| 155 |
|
| 156 |
vreg_wlan: regulator-wlan { |
| 157 |
compatible = "regulator-fixed"; |
| 158 |
|
| 159 |
regulator-name = "VCC_WLAN_3R9"; |
| 160 |
regulator-min-microvolt = <3900000>; |
| 161 |
regulator-max-microvolt = <3900000>; |
| 162 |
|
| 163 |
gpio = <&pmr735a_gpios 1 GPIO_ACTIVE_HIGH>; |
| 164 |
enable-active-high; |
| 165 |
|
| 166 |
pinctrl-0 = <&hastings_reg_en>; |
| 167 |
pinctrl-names = "default"; |
| 168 |
|
| 169 |
regulator-boot-on; |
| 170 |
}; |
| 171 |
|
| 172 |
vreg_wwan: regulator-wwan { |
| 173 |
compatible = "regulator-fixed"; |
| 174 |
|
| 175 |
regulator-name = "VCC3B_WAN"; |
| 176 |
regulator-min-microvolt = <3300000>; |
| 177 |
regulator-max-microvolt = <3300000>; |
| 178 |
|
| 179 |
gpio = <&pmc8280_2_gpios 1 GPIO_ACTIVE_HIGH>; |
| 180 |
enable-active-high; |
| 181 |
|
| 182 |
pinctrl-0 = <&wwan_sw_en>; |
| 183 |
pinctrl-names = "default"; |
| 184 |
|
| 185 |
regulator-boot-on; |
| 186 |
}; |
| 187 |
|
| 188 |
reserved-memory { |
| 189 |
linux,cma { |
| 190 |
compatible = "shared-dma-pool"; |
| 191 |
size = <0x0 0x8000000>; |
| 192 |
reusable; |
| 193 |
linux,cma-default; |
| 194 |
}; |
| 195 |
}; |
| 196 |
|
| 197 |
thermal-zones { |
| 198 |
skin-temp-thermal { |
| 199 |
polling-delay-passive = <250>; |
| 200 |
|
| 201 |
thermal-sensors = <&pmk8280_adc_tm 5>; |
| 202 |
|
| 203 |
trips { |
| 204 |
skin_temp_alert0: trip-point0 { |
| 205 |
temperature = <55000>; |
| 206 |
hysteresis = <1000>; |
| 207 |
type = "passive"; |
| 208 |
}; |
| 209 |
|
| 210 |
skin_temp_alert1: trip-point1 { |
| 211 |
temperature = <58000>; |
| 212 |
hysteresis = <1000>; |
| 213 |
type = "passive"; |
| 214 |
}; |
| 215 |
|
| 216 |
skin-temp-crit { |
| 217 |
temperature = <73000>; |
| 218 |
hysteresis = <1000>; |
| 219 |
type = "critical"; |
| 220 |
}; |
| 221 |
}; |
| 222 |
|
| 223 |
cooling-maps { |
| 224 |
map0 { |
| 225 |
trip = <&skin_temp_alert0>; |
| 226 |
cooling-device = <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| 227 |
<&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| 228 |
<&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| 229 |
<&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; |
| 230 |
}; |
| 231 |
|
| 232 |
map1 { |
| 233 |
trip = <&skin_temp_alert1>; |
| 234 |
cooling-device = <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| 235 |
<&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| 236 |
<&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| 237 |
<&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; |
| 238 |
}; |
| 239 |
}; |
| 240 |
}; |
| 241 |
}; |
| 242 |
|
| 243 |
usb0-sbu-mux { |
| 244 |
compatible = "pericom,pi3usb102", "gpio-sbu-mux"; |
| 245 |
|
| 246 |
enable-gpios = <&tlmm 101 GPIO_ACTIVE_LOW>; |
| 247 |
select-gpios = <&tlmm 164 GPIO_ACTIVE_HIGH>; |
| 248 |
|
| 249 |
pinctrl-0 = <&usb0_sbu_default>; |
| 250 |
pinctrl-names = "default"; |
| 251 |
|
| 252 |
mode-switch; |
| 253 |
orientation-switch; |
| 254 |
|
| 255 |
port { |
| 256 |
usb0_sbu_mux: endpoint { |
| 257 |
remote-endpoint = <&pmic_glink_con0_sbu>; |
| 258 |
}; |
| 259 |
}; |
| 260 |
}; |
| 261 |
|
| 262 |
usb1-sbu-mux { |
| 263 |
compatible = "pericom,pi3usb102", "gpio-sbu-mux"; |
| 264 |
|
| 265 |
enable-gpios = <&tlmm 48 GPIO_ACTIVE_LOW>; |
| 266 |
select-gpios = <&tlmm 47 GPIO_ACTIVE_HIGH>; |
| 267 |
|
| 268 |
pinctrl-0 = <&usb1_sbu_default>; |
| 269 |
pinctrl-names = "default"; |
| 270 |
|
| 271 |
mode-switch; |
| 272 |
orientation-switch; |
| 273 |
|
| 274 |
port { |
| 275 |
usb1_sbu_mux: endpoint { |
| 276 |
remote-endpoint = <&pmic_glink_con1_sbu>; |
| 277 |
}; |
| 278 |
}; |
| 279 |
}; |
| 280 |
}; |
| 281 |
|
| 282 |
&apps_rsc { |
| 283 |
regulators-0 { |
| 284 |
compatible = "qcom,pm8350-rpmh-regulators"; |
| 285 |
qcom,pmic-id = "b"; |
| 286 |
|
| 287 |
vdd-l1-l4-supply = <&vreg_s12b>; |
| 288 |
vdd-l2-l7-supply = <&vreg_bob>; |
| 289 |
vdd-l3-l5-supply = <&vreg_s11b>; |
| 290 |
vdd-l6-l9-l10-supply = <&vreg_s12b>; |
| 291 |
vdd-l8-supply = <&vreg_s12b>; |
| 292 |
|
| 293 |
vreg_s10b: smps10 { |
| 294 |
regulator-name = "vreg_s10b"; |
| 295 |
regulator-min-microvolt = <1800000>; |
| 296 |
regulator-max-microvolt = <1800000>; |
| 297 |
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| 298 |
regulator-always-on; |
| 299 |
}; |
| 300 |
|
| 301 |
vreg_s11b: smps11 { |
| 302 |
regulator-name = "vreg_s11b"; |
| 303 |
regulator-min-microvolt = <1272000>; |
| 304 |
regulator-max-microvolt = <1272000>; |
| 305 |
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| 306 |
regulator-always-on; |
| 307 |
}; |
| 308 |
|
| 309 |
vreg_s12b: smps12 { |
| 310 |
regulator-name = "vreg_s12b"; |
| 311 |
regulator-min-microvolt = <984000>; |
| 312 |
regulator-max-microvolt = <984000>; |
| 313 |
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| 314 |
regulator-always-on; |
| 315 |
}; |
| 316 |
|
| 317 |
vreg_l3b: ldo3 { |
| 318 |
regulator-name = "vreg_l3b"; |
| 319 |
regulator-min-microvolt = <1200000>; |
| 320 |
regulator-max-microvolt = <1200000>; |
| 321 |
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| 322 |
regulator-boot-on; |
| 323 |
}; |
| 324 |
|
| 325 |
vreg_l4b: ldo4 { |
| 326 |
regulator-name = "vreg_l4b"; |
| 327 |
regulator-min-microvolt = <912000>; |
| 328 |
regulator-max-microvolt = <912000>; |
| 329 |
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| 330 |
}; |
| 331 |
|
| 332 |
vreg_l6b: ldo6 { |
| 333 |
regulator-name = "vreg_l6b"; |
| 334 |
regulator-min-microvolt = <880000>; |
| 335 |
regulator-max-microvolt = <880000>; |
| 336 |
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| 337 |
regulator-boot-on; |
| 338 |
regulator-always-on; // FIXME: VDD_A_EDP_0_0P9 |
| 339 |
}; |
| 340 |
}; |
| 341 |
|
| 342 |
regulators-1 { |
| 343 |
compatible = "qcom,pm8350c-rpmh-regulators"; |
| 344 |
qcom,pmic-id = "c"; |
| 345 |
|
| 346 |
vdd-bob-supply = <&vreg_vph_pwr>; |
| 347 |
vdd-l1-l12-supply = <&vreg_s1c>; |
| 348 |
vdd-l2-l8-supply = <&vreg_s1c>; |
| 349 |
vdd-l3-l4-l5-l7-l13-supply = <&vreg_bob>; |
| 350 |
vdd-l6-l9-l11-supply = <&vreg_bob>; |
| 351 |
vdd-l10-supply = <&vreg_s11b>; |
| 352 |
|
| 353 |
vreg_s1c: smps1 { |
| 354 |
regulator-name = "vreg_s1c"; |
| 355 |
regulator-min-microvolt = <1880000>; |
| 356 |
regulator-max-microvolt = <1900000>; |
| 357 |
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| 358 |
regulator-always-on; |
| 359 |
}; |
| 360 |
|
| 361 |
vreg_l1c: ldo1 { |
| 362 |
regulator-name = "vreg_l1c"; |
| 363 |
regulator-min-microvolt = <1800000>; |
| 364 |
regulator-max-microvolt = <1800000>; |
| 365 |
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| 366 |
}; |
| 367 |
|
| 368 |
vreg_l12c: ldo12 { |
| 369 |
regulator-name = "vreg_l12c"; |
| 370 |
regulator-min-microvolt = <1800000>; |
| 371 |
regulator-max-microvolt = <1800000>; |
| 372 |
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| 373 |
}; |
| 374 |
|
| 375 |
vreg_l13c: ldo13 { |
| 376 |
regulator-name = "vreg_l13c"; |
| 377 |
regulator-min-microvolt = <3072000>; |
| 378 |
regulator-max-microvolt = <3072000>; |
| 379 |
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| 380 |
}; |
| 381 |
|
| 382 |
vreg_bob: bob { |
| 383 |
regulator-name = "vreg_bob"; |
| 384 |
regulator-min-microvolt = <3008000>; |
| 385 |
regulator-max-microvolt = <3960000>; |
| 386 |
regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>; |
| 387 |
regulator-always-on; |
| 388 |
}; |
| 389 |
}; |
| 390 |
|
| 391 |
regulators-2 { |
| 392 |
compatible = "qcom,pm8350-rpmh-regulators"; |
| 393 |
qcom,pmic-id = "d"; |
| 394 |
|
| 395 |
vdd-l1-l4-supply = <&vreg_s11b>; |
| 396 |
vdd-l2-l7-supply = <&vreg_bob>; |
| 397 |
vdd-l3-l5-supply = <&vreg_s11b>; |
| 398 |
vdd-l6-l9-l10-supply = <&vreg_s12b>; |
| 399 |
vdd-l8-supply = <&vreg_s12b>; |
| 400 |
|
| 401 |
vreg_l3d: ldo3 { |
| 402 |
regulator-name = "vreg_l3d"; |
| 403 |
regulator-min-microvolt = <1200000>; |
| 404 |
regulator-max-microvolt = <1200000>; |
| 405 |
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| 406 |
}; |
| 407 |
|
| 408 |
vreg_l4d: ldo4 { |
| 409 |
regulator-name = "vreg_l4d"; |
| 410 |
regulator-min-microvolt = <1200000>; |
| 411 |
regulator-max-microvolt = <1200000>; |
| 412 |
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| 413 |
}; |
| 414 |
|
| 415 |
vreg_l6d: ldo6 { |
| 416 |
regulator-name = "vreg_l6d"; |
| 417 |
regulator-min-microvolt = <880000>; |
| 418 |
regulator-max-microvolt = <880000>; |
| 419 |
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| 420 |
}; |
| 421 |
|
| 422 |
vreg_l7d: ldo7 { |
| 423 |
regulator-name = "vreg_l7d"; |
| 424 |
regulator-min-microvolt = <3072000>; |
| 425 |
regulator-max-microvolt = <3072000>; |
| 426 |
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| 427 |
}; |
| 428 |
|
| 429 |
vreg_l9d: ldo9 { |
| 430 |
regulator-name = "vreg_l9d"; |
| 431 |
regulator-min-microvolt = <912000>; |
| 432 |
regulator-max-microvolt = <912000>; |
| 433 |
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| 434 |
}; |
| 435 |
}; |
| 436 |
}; |
| 437 |
|
| 438 |
&dispcc0 { |
| 439 |
status = "okay"; |
| 440 |
}; |
| 441 |
|
| 442 |
&dispcc1 { |
| 443 |
status = "okay"; |
| 444 |
}; |
| 445 |
|
| 446 |
&gpi_dma0 { |
| 447 |
status = "okay"; |
| 448 |
}; |
| 449 |
|
| 450 |
&gpi_dma1 { |
| 451 |
status = "okay"; |
| 452 |
}; |
| 453 |
|
| 454 |
&gpi_dma2 { |
| 455 |
status = "okay"; |
| 456 |
}; |
| 457 |
|
| 458 |
&gpu { |
| 459 |
status = "okay"; |
| 460 |
}; |
| 461 |
|
| 462 |
&gpu_zap_shader { |
| 463 |
firmware-name = "qcom/sc8280xp/MICROSOFT/SurfacePro9/qcdxkmsuc8280.mbn"; |
| 464 |
}; |
| 465 |
|
| 466 |
&mdss0 { |
| 467 |
status = "okay"; |
| 468 |
}; |
| 469 |
|
| 470 |
&mdss0_dp0 { |
| 471 |
status = "okay"; |
| 472 |
}; |
| 473 |
|
| 474 |
&mdss0_dp0_out { |
| 475 |
data-lanes = <0 1>; |
| 476 |
remote-endpoint = <&usb_0_qmpphy_dp_in>; |
| 477 |
}; |
| 478 |
|
| 479 |
&mdss0_dp1 { |
| 480 |
status = "okay"; |
| 481 |
}; |
| 482 |
|
| 483 |
&mdss0_dp1_out { |
| 484 |
data-lanes = <0 1>; |
| 485 |
remote-endpoint = <&usb_1_qmpphy_dp_in>; |
| 486 |
}; |
| 487 |
|
| 488 |
&pcie2a { |
| 489 |
perst-gpios = <&tlmm 143 GPIO_ACTIVE_LOW>; |
| 490 |
wake-gpios = <&tlmm 145 GPIO_ACTIVE_LOW>; |
| 491 |
|
| 492 |
vddpe-3v3-supply = <&vreg_nvme>; |
| 493 |
|
| 494 |
pinctrl-0 = <&pcie2a_default>; |
| 495 |
pinctrl-names = "default"; |
| 496 |
|
| 497 |
status = "okay"; |
| 498 |
}; |
| 499 |
|
| 500 |
&pcie2a_phy { |
| 501 |
vdda-phy-supply = <&vreg_l6d>; |
| 502 |
vdda-pll-supply = <&vreg_l4d>; |
| 503 |
|
| 504 |
status = "okay"; |
| 505 |
}; |
| 506 |
|
| 507 |
&pcie3a { |
| 508 |
perst-gpios = <&tlmm 151 GPIO_ACTIVE_LOW>; |
| 509 |
wake-gpios = <&tlmm 148 GPIO_ACTIVE_LOW>; |
| 510 |
|
| 511 |
vddpe-3v3-supply = <&vreg_wwan>; |
| 512 |
|
| 513 |
pinctrl-0 = <&pcie3a_default>; |
| 514 |
pinctrl-names = "default"; |
| 515 |
|
| 516 |
status = "okay"; |
| 517 |
}; |
| 518 |
|
| 519 |
&pcie3a_phy { |
| 520 |
vdda-phy-supply = <&vreg_l6d>; |
| 521 |
vdda-pll-supply = <&vreg_l4d>; |
| 522 |
|
| 523 |
status = "okay"; |
| 524 |
}; |
| 525 |
|
| 526 |
&pcie4 { |
| 527 |
max-link-speed = <2>; |
| 528 |
|
| 529 |
perst-gpios = <&tlmm 141 GPIO_ACTIVE_LOW>; |
| 530 |
wake-gpios = <&tlmm 139 GPIO_ACTIVE_LOW>; |
| 531 |
|
| 532 |
vddpe-3v3-supply = <&vreg_wlan>; |
| 533 |
|
| 534 |
pinctrl-0 = <&pcie4_default>; |
| 535 |
pinctrl-names = "default"; |
| 536 |
|
| 537 |
status = "okay"; |
| 538 |
}; |
| 539 |
|
| 540 |
&pcie4_port0 { |
| 541 |
wifi@0 { |
| 542 |
compatible = "pci17cb,1103"; |
| 543 |
reg = <0x10000 0x0 0x0 0x0 0x0>; |
| 544 |
|
| 545 |
qcom,calibration-variant = "MS_SP9_5G"; |
| 546 |
}; |
| 547 |
}; |
| 548 |
|
| 549 |
&pcie4_phy { |
| 550 |
vdda-phy-supply = <&vreg_l6d>; |
| 551 |
vdda-pll-supply = <&vreg_l4d>; |
| 552 |
|
| 553 |
status = "okay"; |
| 554 |
}; |
| 555 |
|
| 556 |
&pmk8280_pon_pwrkey { |
| 557 |
status = "okay"; |
| 558 |
}; |
| 559 |
|
| 560 |
&pmk8280_pon_resin { |
| 561 |
status = "okay"; |
| 562 |
}; |
| 563 |
|
| 564 |
&pmk8280_rtc { |
| 565 |
nvmem-cells = <&rtc_offset>; |
| 566 |
nvmem-cell-names = "offset"; |
| 567 |
|
| 568 |
status = "okay"; |
| 569 |
}; |
| 570 |
|
| 571 |
&pmk8280_sdam_6 { |
| 572 |
status = "okay"; |
| 573 |
|
| 574 |
rtc_offset: rtc-offset@bc { |
| 575 |
reg = <0xbc 0x4>; |
| 576 |
}; |
| 577 |
}; |
| 578 |
|
| 579 |
&qup0 { |
| 580 |
status = "okay"; |
| 581 |
}; |
| 582 |
|
| 583 |
&qup1 { |
| 584 |
status = "okay"; |
| 585 |
}; |
| 586 |
|
| 587 |
&qup2 { |
| 588 |
status = "okay"; |
| 589 |
}; |
| 590 |
|
| 591 |
&remoteproc_adsp { |
| 592 |
firmware-name = "qcom/sc8280xp/MICROSOFT/SurfacePro9/qcadsp8280.mbn"; |
| 593 |
|
| 594 |
status = "okay"; |
| 595 |
}; |
| 596 |
|
| 597 |
&remoteproc_nsp0 { |
| 598 |
firmware-name = "qcom/sc8280xp/MICROSOFT/SurfacePro9/qccdsp8280.mbn"; |
| 599 |
|
| 600 |
status = "okay"; |
| 601 |
}; |
| 602 |
|
| 603 |
&rxmacro { |
| 604 |
status = "okay"; |
| 605 |
}; |
| 606 |
|
| 607 |
&sound { |
| 608 |
compatible = "qcom,sc8280xp-sndcard"; |
| 609 |
model = "SC8280XP-MICROSOFT-SURFACE-PRO-9-5G"; |
| 610 |
audio-routing = "SpkrLeft IN", "WSA_SPK1 OUT", |
| 611 |
"SpkrRight IN", "WSA_SPK2 OUT", |
| 612 |
"IN1_HPHL", "HPHL_OUT", |
| 613 |
"IN2_HPHR", "HPHR_OUT", |
| 614 |
"AMIC2", "MIC BIAS2", |
| 615 |
"VA DMIC0", "MIC BIAS1", |
| 616 |
"VA DMIC1", "MIC BIAS1", |
| 617 |
"VA DMIC2", "MIC BIAS3", |
| 618 |
"VA DMIC0", "VA MIC BIAS1", |
| 619 |
"VA DMIC1", "VA MIC BIAS1", |
| 620 |
"VA DMIC2", "VA MIC BIAS3", |
| 621 |
"TX SWR_ADC1", "ADC2_OUTPUT"; |
| 622 |
|
| 623 |
wcd-playback-dai-link { |
| 624 |
link-name = "WCD Playback"; |
| 625 |
|
| 626 |
cpu { |
| 627 |
sound-dai = <&q6apmbedai RX_CODEC_DMA_RX_0>; |
| 628 |
}; |
| 629 |
|
| 630 |
codec { |
| 631 |
sound-dai = <&wcd938x 0>, <&swr1 0>, <&rxmacro 0>; |
| 632 |
}; |
| 633 |
|
| 634 |
platform { |
| 635 |
sound-dai = <&q6apm>; |
| 636 |
}; |
| 637 |
}; |
| 638 |
|
| 639 |
wcd-capture-dai-link { |
| 640 |
link-name = "WCD Capture"; |
| 641 |
|
| 642 |
cpu { |
| 643 |
sound-dai = <&q6apmbedai TX_CODEC_DMA_TX_3>; |
| 644 |
}; |
| 645 |
|
| 646 |
codec { |
| 647 |
sound-dai = <&wcd938x 1>, <&swr2 0>, <&txmacro 0>; |
| 648 |
}; |
| 649 |
|
| 650 |
platform { |
| 651 |
sound-dai = <&q6apm>; |
| 652 |
}; |
| 653 |
}; |
| 654 |
|
| 655 |
wsa-dai-link { |
| 656 |
link-name = "WSA Playback"; |
| 657 |
|
| 658 |
cpu { |
| 659 |
sound-dai = <&q6apmbedai WSA_CODEC_DMA_RX_0>; |
| 660 |
}; |
| 661 |
|
| 662 |
codec { |
| 663 |
sound-dai = <&swr0 0>, <&wsamacro 0>; |
| 664 |
}; |
| 665 |
|
| 666 |
platform { |
| 667 |
sound-dai = <&q6apm>; |
| 668 |
}; |
| 669 |
}; |
| 670 |
|
| 671 |
va-dai-link { |
| 672 |
link-name = "VA Capture"; |
| 673 |
|
| 674 |
cpu { |
| 675 |
sound-dai = <&q6apmbedai VA_CODEC_DMA_TX_0>; |
| 676 |
}; |
| 677 |
|
| 678 |
platform { |
| 679 |
sound-dai = <&q6apm>; |
| 680 |
}; |
| 681 |
|
| 682 |
codec { |
| 683 |
sound-dai = <&vamacro 0>; |
| 684 |
}; |
| 685 |
}; |
| 686 |
}; |
| 687 |
|
| 688 |
&swr0 { |
| 689 |
status = "okay"; |
| 690 |
}; |
| 691 |
|
| 692 |
&swr1 { |
| 693 |
status = "okay"; |
| 694 |
|
| 695 |
wcd_rx: codec@0,4 { |
| 696 |
compatible = "sdw20217010d00"; |
| 697 |
reg = <0 4>; |
| 698 |
qcom,rx-port-mapping = <1 2 3 4 5>; |
| 699 |
}; |
| 700 |
}; |
| 701 |
|
| 702 |
&swr2 { |
| 703 |
status = "okay"; |
| 704 |
|
| 705 |
wcd_tx: codec@0,3 { |
| 706 |
compatible = "sdw20217010d00"; |
| 707 |
reg = <0 3>; |
| 708 |
qcom,tx-port-mapping = <1 1 2 3>; |
| 709 |
}; |
| 710 |
}; |
| 711 |
|
| 712 |
&txmacro { |
| 713 |
status = "okay"; |
| 714 |
}; |
| 715 |
|
| 716 |
&uart2 { |
| 717 |
pinctrl-0 = <&uart2_default>; |
| 718 |
pinctrl-names = "default"; |
| 719 |
|
| 720 |
status = "okay"; |
| 721 |
|
| 722 |
bluetooth { |
| 723 |
compatible = "qcom,wcn6855-bt"; |
| 724 |
|
| 725 |
vddio-supply = <&vreg_s10b>; |
| 726 |
vddbtcxmx-supply = <&vreg_s12b>; |
| 727 |
vddrfacmn-supply = <&vreg_s12b>; |
| 728 |
vddrfa0p8-supply = <&vreg_s12b>; |
| 729 |
vddrfa1p2-supply = <&vreg_s11b>; |
| 730 |
vddrfa1p7-supply = <&vreg_s1c>; |
| 731 |
|
| 732 |
max-speed = <3200000>; |
| 733 |
|
| 734 |
enable-gpios = <&tlmm 133 GPIO_ACTIVE_HIGH>; |
| 735 |
swctrl-gpios = <&tlmm 132 GPIO_ACTIVE_HIGH>; |
| 736 |
|
| 737 |
pinctrl-0 = <&bt_default>; |
| 738 |
pinctrl-names = "default"; |
| 739 |
}; |
| 740 |
}; |
| 741 |
|
| 742 |
&uart18 { |
| 743 |
status = "okay"; |
| 744 |
|
| 745 |
embedded-controller { |
| 746 |
compatible = "microsoft,surface-sam"; |
| 747 |
|
| 748 |
interrupts-extended = <&tlmm 85 IRQ_TYPE_EDGE_RISING>; |
| 749 |
|
| 750 |
current-speed = <4000000>; |
| 751 |
|
| 752 |
pinctrl-0 = <&ssam_state>; |
| 753 |
pinctrl-names = "default"; |
| 754 |
}; |
| 755 |
}; |
| 756 |
|
| 757 |
&usb_0 { |
| 758 |
status = "okay"; |
| 759 |
}; |
| 760 |
|
| 761 |
&usb_0_dwc3 { |
| 762 |
dr_mode = "host"; |
| 763 |
}; |
| 764 |
|
| 765 |
&usb_0_dwc3_hs { |
| 766 |
remote-endpoint = <&pmic_glink_con0_hs>; |
| 767 |
}; |
| 768 |
|
| 769 |
&usb_0_hsphy { |
| 770 |
vdda-pll-supply = <&vreg_l9d>; |
| 771 |
vdda18-supply = <&vreg_l1c>; |
| 772 |
vdda33-supply = <&vreg_l7d>; |
| 773 |
|
| 774 |
status = "okay"; |
| 775 |
}; |
| 776 |
|
| 777 |
&usb_0_qmpphy { |
| 778 |
vdda-phy-supply = <&vreg_l9d>; |
| 779 |
vdda-pll-supply = <&vreg_l4d>; |
| 780 |
|
| 781 |
orientation-switch; |
| 782 |
|
| 783 |
status = "okay"; |
| 784 |
}; |
| 785 |
|
| 786 |
&usb_0_qmpphy_dp_in { |
| 787 |
remote-endpoint = <&mdss0_dp0_out>; |
| 788 |
}; |
| 789 |
|
| 790 |
&usb_0_qmpphy_out { |
| 791 |
remote-endpoint = <&pmic_glink_con0_ss>; |
| 792 |
}; |
| 793 |
|
| 794 |
&usb_1 { |
| 795 |
status = "okay"; |
| 796 |
}; |
| 797 |
|
| 798 |
&usb_1_dwc3 { |
| 799 |
dr_mode = "host"; |
| 800 |
}; |
| 801 |
|
| 802 |
&usb_1_dwc3_hs { |
| 803 |
remote-endpoint = <&pmic_glink_con1_hs>; |
| 804 |
}; |
| 805 |
|
| 806 |
&usb_1_hsphy { |
| 807 |
vdda-pll-supply = <&vreg_l4b>; |
| 808 |
vdda18-supply = <&vreg_l1c>; |
| 809 |
vdda33-supply = <&vreg_l13c>; |
| 810 |
|
| 811 |
status = "okay"; |
| 812 |
}; |
| 813 |
|
| 814 |
&usb_1_qmpphy { |
| 815 |
vdda-phy-supply = <&vreg_l4b>; |
| 816 |
vdda-pll-supply = <&vreg_l3b>; |
| 817 |
|
| 818 |
orientation-switch; |
| 819 |
|
| 820 |
status = "okay"; |
| 821 |
}; |
| 822 |
|
| 823 |
&usb_1_qmpphy_dp_in { |
| 824 |
remote-endpoint = <&mdss0_dp1_out>; |
| 825 |
}; |
| 826 |
|
| 827 |
&usb_1_qmpphy_out { |
| 828 |
remote-endpoint = <&pmic_glink_con1_ss>; |
| 829 |
}; |
| 830 |
|
| 831 |
&vamacro { |
| 832 |
pinctrl-0 = <&dmic01_default>, <&dmic23_default>; |
| 833 |
pinctrl-names = "default"; |
| 834 |
|
| 835 |
vdd-micb-supply = <&vreg_s10b>; |
| 836 |
|
| 837 |
qcom,dmic-sample-rate = <4800000>; |
| 838 |
|
| 839 |
status = "okay"; |
| 840 |
}; |
| 841 |
|
| 842 |
&wsamacro { |
| 843 |
status = "okay"; |
| 844 |
}; |
| 845 |
|
| 846 |
&xo_board_clk { |
| 847 |
clock-frequency = <38400000>; |
| 848 |
}; |
| 849 |
|
| 850 |
/* PINCTRL */ |
| 851 |
|
| 852 |
&lpass_tlmm { |
| 853 |
status = "okay"; |
| 854 |
}; |
| 855 |
|
| 856 |
&pmc8280_2_gpios { |
| 857 |
wwan_sw_en: wwan-sw-en-state { |
| 858 |
pins = "gpio1"; |
| 859 |
function = "normal"; |
| 860 |
}; |
| 861 |
}; |
| 862 |
|
| 863 |
&pmr735a_gpios { |
| 864 |
hastings_reg_en: hastings-reg-en-state { |
| 865 |
pins = "gpio1"; |
| 866 |
function = "normal"; |
| 867 |
}; |
| 868 |
}; |
| 869 |
|
| 870 |
&tlmm { |
| 871 |
bt_default: bt-default-state { |
| 872 |
hstp-bt-en-pins { |
| 873 |
pins = "gpio133"; |
| 874 |
function = "gpio"; |
| 875 |
drive-strength = <16>; |
| 876 |
bias-disable; |
| 877 |
}; |
| 878 |
|
| 879 |
hstp-sw-ctrl-pins { |
| 880 |
pins = "gpio132"; |
| 881 |
function = "gpio"; |
| 882 |
bias-pull-down; |
| 883 |
}; |
| 884 |
}; |
| 885 |
|
| 886 |
nvme_reg_en: nvme-reg-en-state { |
| 887 |
pins = "gpio135"; |
| 888 |
function = "gpio"; |
| 889 |
drive-strength = <2>; |
| 890 |
bias-disable; |
| 891 |
}; |
| 892 |
|
| 893 |
pcie2a_default: pcie2a-default-state { |
| 894 |
clkreq-n-pins { |
| 895 |
pins = "gpio142"; |
| 896 |
function = "pcie2a_clkreq"; |
| 897 |
drive-strength = <2>; |
| 898 |
bias-pull-up; |
| 899 |
}; |
| 900 |
|
| 901 |
perst-n-pins { |
| 902 |
pins = "gpio143"; |
| 903 |
function = "gpio"; |
| 904 |
drive-strength = <2>; |
| 905 |
bias-disable; |
| 906 |
}; |
| 907 |
|
| 908 |
wake-n-pins { |
| 909 |
pins = "gpio145"; |
| 910 |
function = "gpio"; |
| 911 |
drive-strength = <2>; |
| 912 |
bias-pull-up; |
| 913 |
}; |
| 914 |
}; |
| 915 |
|
| 916 |
pcie3a_default: pcie3a-default-state { |
| 917 |
clkreq-n-pins { |
| 918 |
pins = "gpio150"; |
| 919 |
function = "pcie3a_clkreq"; |
| 920 |
drive-strength = <2>; |
| 921 |
bias-pull-up; |
| 922 |
}; |
| 923 |
|
| 924 |
perst-n-pins { |
| 925 |
pins = "gpio151"; |
| 926 |
function = "gpio"; |
| 927 |
drive-strength = <2>; |
| 928 |
bias-disable; |
| 929 |
}; |
| 930 |
|
| 931 |
wake-n-pins { |
| 932 |
pins = "gpio148"; |
| 933 |
function = "gpio"; |
| 934 |
drive-strength = <2>; |
| 935 |
bias-pull-up; |
| 936 |
}; |
| 937 |
}; |
| 938 |
|
| 939 |
pcie4_default: pcie4-default-state { |
| 940 |
clkreq-n-pins { |
| 941 |
pins = "gpio140"; |
| 942 |
function = "pcie4_clkreq"; |
| 943 |
drive-strength = <2>; |
| 944 |
bias-pull-up; |
| 945 |
}; |
| 946 |
|
| 947 |
perst-n-pins { |
| 948 |
pins = "gpio141"; |
| 949 |
function = "gpio"; |
| 950 |
drive-strength = <2>; |
| 951 |
bias-disable; |
| 952 |
}; |
| 953 |
|
| 954 |
wake-n-pins { |
| 955 |
pins = "gpio139"; |
| 956 |
function = "gpio"; |
| 957 |
drive-strength = <2>; |
| 958 |
bias-pull-up; |
| 959 |
}; |
| 960 |
}; |
| 961 |
|
| 962 |
|
| 963 |
ssam_state: ssam-state-state { |
| 964 |
pins = "gpio85"; |
| 965 |
function = "gpio"; |
| 966 |
bias-disable; |
| 967 |
}; |
| 968 |
|
| 969 |
uart2_default: uart2-default-state { |
| 970 |
cts-pins { |
| 971 |
pins = "gpio121"; |
| 972 |
function = "qup2"; |
| 973 |
bias-bus-hold; |
| 974 |
}; |
| 975 |
|
| 976 |
rts-pins { |
| 977 |
pins = "gpio122"; |
| 978 |
function = "qup2"; |
| 979 |
drive-strength = <2>; |
| 980 |
bias-disable; |
| 981 |
}; |
| 982 |
|
| 983 |
rx-pins { |
| 984 |
pins = "gpio124"; |
| 985 |
function = "qup2"; |
| 986 |
bias-pull-up; |
| 987 |
}; |
| 988 |
|
| 989 |
tx-pins { |
| 990 |
pins = "gpio123"; |
| 991 |
function = "qup2"; |
| 992 |
drive-strength = <2>; |
| 993 |
bias-disable; |
| 994 |
}; |
| 995 |
}; |
| 996 |
|
| 997 |
usb0_sbu_default: usb0-sbu-state { |
| 998 |
oe-n-pins { |
| 999 |
pins = "gpio101"; |
| 1000 |
function = "gpio"; |
| 1001 |
bias-disable; |
| 1002 |
drive-strength = <16>; |
| 1003 |
output-high; |
| 1004 |
}; |
| 1005 |
|
| 1006 |
sel-pins { |
| 1007 |
pins = "gpio164"; |
| 1008 |
function = "gpio"; |
| 1009 |
bias-disable; |
| 1010 |
drive-strength = <16>; |
| 1011 |
}; |
| 1012 |
}; |
| 1013 |
|
| 1014 |
usb1_sbu_default: usb1-sbu-state { |
| 1015 |
oe-n-pins { |
| 1016 |
pins = "gpio48"; |
| 1017 |
function = "gpio"; |
| 1018 |
bias-disable; |
| 1019 |
drive-strength = <16>; |
| 1020 |
output-high; |
| 1021 |
}; |
| 1022 |
|
| 1023 |
sel-pins { |
| 1024 |
pins = "gpio47"; |
| 1025 |
function = "gpio"; |
| 1026 |
bias-disable; |
| 1027 |
drive-strength = <16>; |
| 1028 |
}; |
| 1029 |
}; |
| 1030 |
|
| 1031 |
wcd_default: wcd-default-state { |
| 1032 |
reset-pins { |
| 1033 |
pins = "gpio106"; |
| 1034 |
function = "gpio"; |
| 1035 |
bias-disable; |
| 1036 |
}; |
| 1037 |
}; |
| 1038 |
}; |