Debian Codegraph @

scripts/dtc/include-prefixes/arm64/qcom/sc8180x-lenovo-flex-5g.dts

raw
1 // SPDX-License-Identifier: BSD-3-Clause
2 /*
3 * Copyright (c) 2017-2019, The Linux Foundation. All rights reserved.
4 * Copyright (c) 2020-2023, Linaro Limited
5 */
6
7 /dts-v1/;
8
9 #include <dt-bindings/firmware/qcom,scm.h>
10 #include <dt-bindings/gpio/gpio.h>
11 #include <dt-bindings/input/gpio-keys.h>
12 #include <dt-bindings/input/input.h>
13 #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
14 #include "sc8180x.dtsi"
15 #include "sc8180x-pmics.dtsi"
16
17 / {
18 model = "Lenovo Flex 5G";
19 compatible = "lenovo,flex-5g", "qcom,sc8180x";
20
21 aliases {
22 serial0 = &uart13;
23 };
24
25 backlight: backlight {
26 compatible = "pwm-backlight";
27 pwms = <&pmc8180c_lpg 4 1000000>;
28 enable-gpios = <&pmc8180c_gpios 8 GPIO_ACTIVE_HIGH>;
29
30 pinctrl-0 = <&bl_pwm_default>;
31 pinctrl-names = "default";
32 };
33
34 gpio-keys {
35 compatible = "gpio-keys";
36
37 pinctrl-0 = <&hall_int_active_state>;
38 pinctrl-names = "default";
39
40 lid-switch {
41 gpios = <&tlmm 121 GPIO_ACTIVE_LOW>;
42 linux,input-type = <EV_SW>;
43 linux,code = <SW_LID>;
44 wakeup-source;
45 wakeup-event-action = <EV_ACT_DEASSERTED>;
46 };
47 };
48
49 pmic-glink {
50 compatible = "qcom,sc8180x-pmic-glink", "qcom,pmic-glink";
51
52 #address-cells = <1>;
53 #size-cells = <0>;
54 orientation-gpios = <&tlmm 38 GPIO_ACTIVE_HIGH>,
55 <&tlmm 58 GPIO_ACTIVE_HIGH>;
56
57 connector@0 {
58 compatible = "usb-c-connector";
59 reg = <0>;
60 power-role = "dual";
61 data-role = "dual";
62
63 ports {
64 #address-cells = <1>;
65 #size-cells = <0>;
66
67 port@0 {
68 reg = <0>;
69
70 pmic_glink_con0_hs: endpoint {
71 remote-endpoint = <&usb_prim_dwc3_hs>;
72 };
73 };
74
75 port@1 {
76 reg = <1>;
77
78 pmic_glink_con0_ss: endpoint {
79 remote-endpoint = <&usb_prim_qmpphy_out>;
80 };
81 };
82
83 port@2 {
84 reg = <2>;
85
86 pmic_glink_con0_sbu: endpoint {
87 remote-endpoint = <&usbprim_sbu_mux>;
88 };
89 };
90 };
91 };
92
93 connector@1 {
94 compatible = "usb-c-connector";
95 reg = <1>;
96 power-role = "dual";
97 data-role = "dual";
98
99 ports {
100 #address-cells = <1>;
101 #size-cells = <0>;
102 port@0 {
103 reg = <0>;
104
105 pmic_glink_con1_hs: endpoint {
106 remote-endpoint = <&usb_sec_dwc3_hs>;
107 };
108 };
109
110 port@1 {
111 reg = <1>;
112
113 pmic_glink_con1_ss: endpoint {
114 remote-endpoint = <&usb_sec_qmpphy_out>;
115 };
116 };
117
118 port@2 {
119 reg = <2>;
120
121 pmic_glink_con1_sbu: endpoint {
122 remote-endpoint = <&usbsec_sbu_mux>;
123 };
124 };
125 };
126 };
127 };
128
129 reserved-memory {
130 rmtfs_mem: rmtfs-region@85500000 {
131 compatible = "qcom,rmtfs-mem";
132 reg = <0x0 0x85500000 0x0 0x200000>;
133 no-map;
134
135 qcom,client-id = <1>;
136 qcom,vmid = <QCOM_SCM_VMID_MSS_MSA>;
137 };
138
139 wlan_mem: wlan-region@8bc00000 {
140 reg = <0x0 0x8bc00000 0x0 0x180000>;
141 no-map;
142 };
143
144 mpss_mem: mpss-region@8d800000 {
145 reg = <0x0 0x8d800000 0x0 0x3000000>;
146 no-map;
147 };
148
149 adsp_mem: adsp-region@90800000 {
150 reg = <0x0 0x90800000 0x0 0x1c00000>;
151 no-map;
152 };
153
154 cdsp_mem: cdsp-region@98900000 {
155 reg = <0x0 0x98900000 0x0 0x1400000>;
156 no-map;
157 };
158 };
159
160 vph_pwr: vph-pwr-regulator {
161 compatible = "regulator-fixed";
162 regulator-name = "vph_pwr";
163 regulator-min-microvolt = <3700000>;
164 regulator-max-microvolt = <3700000>;
165 };
166
167 vreg_s4a_1p8: pm8150-s4-regulator {
168 compatible = "regulator-fixed";
169 regulator-name = "vreg_s4a_1p8";
170
171 regulator-min-microvolt = <1800000>;
172 regulator-max-microvolt = <1800000>;
173
174 regulator-always-on;
175 regulator-boot-on;
176
177 vin-supply = <&vph_pwr>;
178 };
179
180 usbprim-sbu-mux {
181 compatible = "pericom,pi3usb102", "gpio-sbu-mux";
182
183 enable-gpios = <&tlmm 152 GPIO_ACTIVE_LOW>;
184 select-gpios = <&tlmm 100 GPIO_ACTIVE_HIGH>;
185
186 pinctrl-names = "default";
187 pinctrl-0 = <&usbprim_sbu_default>;
188
189 mode-switch;
190 orientation-switch;
191
192 port {
193 usbprim_sbu_mux: endpoint {
194 remote-endpoint = <&pmic_glink_con0_sbu>;
195 };
196 };
197 };
198
199 usbsec-sbu-mux {
200 compatible = "pericom,pi3usb102", "gpio-sbu-mux";
201
202 enable-gpios = <&tlmm 188 GPIO_ACTIVE_LOW>;
203 select-gpios = <&tlmm 187 GPIO_ACTIVE_HIGH>;
204
205 pinctrl-names = "default";
206 pinctrl-0 = <&usbsec_sbu_default>;
207
208 mode-switch;
209 orientation-switch;
210
211 port {
212 usbsec_sbu_mux: endpoint {
213 remote-endpoint = <&pmic_glink_con1_sbu>;
214 };
215 };
216 };
217 };
218
219 &apps_rsc {
220 regulators-0 {
221 compatible = "qcom,pmc8180-rpmh-regulators";
222 qcom,pmic-id = "a";
223
224 vdd-s5-supply = <&vph_pwr>;
225 vdd-l7-l12-l14-l15-supply = <&vreg_s5a_2p0>;
226
227 vreg_s5a_2p0: smps5 {
228 regulator-min-microvolt = <2040000>;
229 regulator-max-microvolt = <2100000>;
230 };
231
232 vreg_l7a_1p8: ldo7 {
233 regulator-min-microvolt = <1800000>;
234 regulator-max-microvolt = <1800000>;
235 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
236 };
237
238 vreg_l9a_1p3: ldo9 {
239 regulator-min-microvolt = <1296000>;
240 regulator-max-microvolt = <1304000>;
241 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
242 };
243
244 vreg_l12a_1p8: ldo12 {
245 regulator-min-microvolt = <1800000>;
246 regulator-max-microvolt = <1800000>;
247 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
248 };
249 };
250
251 regulators-1 {
252 compatible = "qcom,pmc8180c-rpmh-regulators";
253 qcom,pmic-id = "c";
254
255 vdd-s6-supply = <&vph_pwr>;
256 vdd-l2-l3-supply = <&vreg_s6c_1p35>;
257 vdd-bob-supply = <&vph_pwr>;
258
259 vreg_s6c_1p35: smps6 {
260 regulator-min-microvolt = <1350000>;
261 regulator-max-microvolt = <1372000>;
262 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
263 };
264
265 vreg_l3c_1p2: ldo3 {
266 regulator-min-microvolt = <1200000>;
267 regulator-max-microvolt = <1200000>;
268 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
269 };
270
271 vreg_l10c_3p3: ldo10 {
272 regulator-min-microvolt = <3000000>;
273 regulator-max-microvolt = <3312000>;
274 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
275 };
276
277 vreg_l11c_3p3: ldo11 {
278 regulator-min-microvolt = <3296000>;
279 regulator-max-microvolt = <3304000>;
280 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
281 };
282
283 vreg_bob: bob {
284 regulator-min-microvolt = <3296000>;
285 regulator-max-microvolt = <3350000>;
286 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
287 };
288 };
289
290 regulators-2 {
291 compatible = "qcom,pmc8180-rpmh-regulators";
292 qcom,pmic-id = "e";
293
294 vdd-s4-supply = <&vph_pwr>;
295 vdd-s5-supply = <&vph_pwr>;
296 vdd-l2-l10-supply = <&vreg_bob>;
297 vdd-l3-l4-l5-l18-supply = <&vreg_s4e_0p98>;
298 vdd-l7-l12-l14-l15-supply = <&vreg_s5e_2p05>;
299 vdd-l13-l16-l17-supply = <&vreg_bob>;
300
301 vreg_s4e_0p98: smps4 {
302 regulator-min-microvolt = <992000>;
303 regulator-max-microvolt = <992000>;
304 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
305 };
306
307 vreg_s5e_2p05: smps5 {
308 regulator-min-microvolt = <2040000>;
309 regulator-max-microvolt = <2040000>;
310 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
311 };
312
313 vreg_l1e_0p75: ldo1 {
314 regulator-min-microvolt = <752000>;
315 regulator-max-microvolt = <752000>;
316 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
317 };
318
319 vreg_l5e_0p88: ldo5 {
320 regulator-min-microvolt = <880000>;
321 regulator-max-microvolt = <880000>;
322 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
323 };
324
325 vreg_l7e_1p8: ldo7 {
326 regulator-min-microvolt = <1800000>;
327 regulator-max-microvolt = <1800000>;
328 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
329 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
330 RPMH_REGULATOR_MODE_HPM>;
331 regulator-allow-set-load;
332 };
333
334 vreg_l10e_2p9: ldo10 {
335 regulator-min-microvolt = <2904000>;
336 regulator-max-microvolt = <2904000>;
337 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
338 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
339 RPMH_REGULATOR_MODE_HPM>;
340 regulator-allow-set-load;
341 };
342
343 vreg_l16e_3p0: ldo16 {
344 regulator-min-microvolt = <3072000>;
345 regulator-max-microvolt = <3072000>;
346 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
347 };
348 };
349 };
350
351 &gpu {
352 status = "okay";
353 };
354
355 &gpu_zap_shader {
356 firmware-name = "qcom/sc8180x/LENOVO/82AK/qcdxkmsuc8180.mbn";
357 };
358
359 &i2c1 {
360 clock-frequency = <100000>;
361
362 pinctrl-0 = <&i2c1_active>;
363 pinctrl-names = "default";
364
365 status = "okay";
366
367 touchscreen@10 {
368 compatible = "hid-over-i2c";
369 reg = <0x10>;
370 hid-descr-addr = <0x1>;
371
372 interrupts-extended = <&tlmm 122 IRQ_TYPE_LEVEL_LOW>;
373
374 pinctrl-0 = <&ts_int_default>;
375 pinctrl-names = "default";
376 };
377 };
378
379 &i2c7 {
380 clock-frequency = <1000000>;
381
382 pinctrl-0 = <&i2c7_active>;
383 pinctrl-names = "default";
384
385 status = "okay";
386
387 keyboard@5 {
388 compatible = "hid-over-i2c";
389 reg = <0x5>;
390 hid-descr-addr = <0x20>;
391
392 interrupts-extended = <&tlmm 37 IRQ_TYPE_LEVEL_LOW>;
393
394 pinctrl-0 = <&kb_int_default>;
395 pinctrl-names = "default";
396 };
397
398 touchpad@2c {
399 compatible = "hid-over-i2c";
400 reg = <0x2c>;
401 hid-descr-addr = <0x20>;
402
403 interrupts-extended = <&tlmm 24 IRQ_TYPE_LEVEL_LOW>;
404
405 pinctrl-0 = <&tp_int_default>;
406 pinctrl-names = "default";
407 };
408 };
409
410 &mdss {
411 status = "okay";
412 };
413
414 &mdss_dp0 {
415 status = "okay";
416 };
417
418 &mdss_dp0_out {
419 data-lanes = <0 1>;
420 remote-endpoint = <&usb_prim_qmpphy_dp_in>;
421 };
422
423 &mdss_dp1 {
424 status = "okay";
425 };
426
427 &mdss_dp1_out {
428 data-lanes = <0 1>;
429 remote-endpoint = <&usb_sec_qmpphy_dp_in>;
430 };
431
432 &mdss_edp {
433 pinctrl-0 = <&edp_hpd_active>;
434 pinctrl-names = "default";
435
436 status = "okay";
437
438 aux-bus {
439 panel {
440 compatible = "edp-panel";
441 no-hpd;
442
443 backlight = <&backlight>;
444
445 port {
446 auo_b140han06_in: endpoint {
447 remote-endpoint = <&mdss_edp_out>;
448 };
449 };
450 };
451 };
452 };
453
454 &mdss_edp_out {
455 data-lanes = <0 1 2 3>;
456 remote-endpoint = <&auo_b140han06_in>;
457 };
458
459 &pcie3 {
460 perst-gpios = <&tlmm 178 GPIO_ACTIVE_LOW>;
461 wake-gpios = <&tlmm 180 GPIO_ACTIVE_HIGH>;
462 pinctrl-0 = <&pcie3_default_state>;
463 pinctrl-names = "default";
464
465 status = "okay";
466 };
467
468 &pcie3_phy {
469 vdda-phy-supply = <&vreg_l5e_0p88>;
470 vdda-pll-supply = <&vreg_l3c_1p2>;
471
472 status = "okay";
473 };
474
475 &pmc8180_pwrkey {
476 status = "okay";
477 };
478
479 &pmc8180c_lpg {
480 status = "okay";
481 };
482
483 &qupv3_id_0 {
484 status = "okay";
485 };
486
487 &qupv3_id_1 {
488 status = "okay";
489 };
490
491 &qupv3_id_2 {
492 status = "okay";
493 };
494
495 &remoteproc_adsp {
496 memory-region = <&adsp_mem>;
497 firmware-name = "qcom/sc8180x/LENOVO/82AK/qcadsp8180.mbn";
498
499 status = "okay";
500 };
501
502 &remoteproc_cdsp {
503 memory-region = <&cdsp_mem>;
504 firmware-name = "qcom/sc8180x/LENOVO/82AK/qccdsp8180.mbn";
505
506 status = "okay";
507 };
508
509 &remoteproc_mpss {
510 memory-region = <&mpss_mem>;
511 firmware-name = "qcom/sc8180x/LENOVO/82AK/qcmpss8180_nm.mbn";
512
513 status = "okay";
514 };
515
516 &uart13 {
517 pinctrl-0 = <&uart13_state>;
518 pinctrl-names = "default";
519
520 status = "okay";
521
522 bluetooth {
523 compatible = "qcom,wcn3998-bt";
524
525 vddio-supply = <&vreg_s4a_1p8>;
526 vddxo-supply = <&vreg_l7a_1p8>;
527 vddrf-supply = <&vreg_l9a_1p3>;
528 vddch0-supply = <&vreg_l11c_3p3>;
529 max-speed = <3200000>;
530 };
531 };
532
533 &ufs_mem_hc {
534 reset-gpios = <&tlmm 190 GPIO_ACTIVE_LOW>;
535
536 vcc-supply = <&vreg_l10e_2p9>;
537 vcc-max-microamp = <155000>;
538
539 vccq2-supply = <&vreg_l7e_1p8>;
540 vccq2-max-microamp = <425000>;
541
542 status = "okay";
543 };
544
545 &ufs_mem_phy {
546 vdda-phy-supply = <&vreg_l5e_0p88>;
547 vdda-pll-supply = <&vreg_l3c_1p2>;
548
549 status = "okay";
550 };
551
552 &usb_mp {
553 status = "okay";
554 };
555
556 &usb_mp_hsphy0 {
557 vdda-pll-supply = <&vreg_l5e_0p88>;
558 vdda18-supply = <&vreg_l12a_1p8>;
559 vdda33-supply = <&vreg_l16e_3p0>;
560
561 status = "okay";
562 };
563
564 &usb_mp_hsphy1 {
565 vdda-pll-supply = <&vreg_l5e_0p88>;
566 vdda18-supply = <&vreg_l12a_1p8>;
567 vdda33-supply = <&vreg_l16e_3p0>;
568
569 status = "okay";
570 };
571
572 &usb_mp_qmpphy0 {
573 vdda-phy-supply = <&vreg_l3c_1p2>;
574 vdda-pll-supply = <&vreg_l5e_0p88>;
575
576 status = "okay";
577 };
578
579 &usb_mp_qmpphy1 {
580 vdda-phy-supply = <&vreg_l3c_1p2>;
581 vdda-pll-supply = <&vreg_l5e_0p88>;
582
583 status = "okay";
584 };
585
586 &usb_prim_hsphy {
587 vdda-pll-supply = <&vreg_l5e_0p88>;
588 vdda18-supply = <&vreg_l12a_1p8>;
589 vdda33-supply = <&vreg_l16e_3p0>;
590
591 status = "okay";
592 };
593
594 &usb_prim_qmpphy {
595 vdda-phy-supply = <&vreg_l3c_1p2>;
596 vdda-pll-supply = <&vreg_l5e_0p88>;
597
598 orientation-switch;
599
600 status = "okay";
601 };
602
603 &usb_prim {
604 status = "okay";
605 };
606
607 &usb_prim_dwc3 {
608 dr_mode = "host";
609 };
610
611 &usb_prim_dwc3_hs {
612 remote-endpoint = <&pmic_glink_con0_hs>;
613 };
614
615 &usb_prim_qmpphy_dp_in {
616 remote-endpoint = <&mdss_dp0_out>;
617 };
618
619 &usb_prim_qmpphy_out {
620 remote-endpoint = <&pmic_glink_con0_ss>;
621 };
622
623 &usb_sec_dwc3_hs {
624 remote-endpoint = <&pmic_glink_con1_hs>;
625 };
626
627 &usb_sec_hsphy {
628 vdda-pll-supply = <&vreg_l5e_0p88>;
629 vdda18-supply = <&vreg_l12a_1p8>;
630 vdda33-supply = <&vreg_l16e_3p0>;
631
632 status = "okay";
633 };
634
635 &usb_sec_qmpphy {
636 vdda-phy-supply = <&vreg_l3c_1p2>;
637 vdda-pll-supply = <&vreg_l5e_0p88>;
638
639 orientation-switch;
640
641 status = "okay";
642 };
643
644 &usb_sec_qmpphy_dp_in {
645 remote-endpoint = <&mdss_dp1_out>;
646 };
647
648 &usb_sec_qmpphy_out {
649 remote-endpoint = <&pmic_glink_con1_ss>;
650 };
651
652 &usb_sec {
653 status = "okay";
654 };
655
656 &usb_sec_dwc3 {
657 dr_mode = "host";
658 };
659
660 &wifi {
661 memory-region = <&wlan_mem>;
662
663 vdd-0.8-cx-mx-supply = <&vreg_l1e_0p75>;
664 vdd-1.8-xo-supply = <&vreg_l7a_1p8>;
665 vdd-1.3-rfa-supply = <&vreg_l9a_1p3>;
666 vdd-3.3-ch0-supply = <&vreg_l11c_3p3>;
667 vdd-3.3-ch1-supply = <&vreg_l10c_3p3>;
668
669 status = "okay";
670 };
671
672 /* PINCTRL */
673
674 &pmc8180c_gpios {
675 bl_pwm_default: bl-pwm-default-state {
676 en-pins {
677 pins = "gpio8";
678 function = "normal";
679 };
680
681 pwm-pins {
682 pins = "gpio10";
683 function = "func1";
684 };
685 };
686 };
687
688 &tlmm {
689 gpio-reserved-ranges = <0 4>, <47 4>, <126 4>;
690
691 edp_hpd_active: epd-hpd-active-state {
692 pins = "gpio10";
693 function = "edp_hot";
694 };
695
696 hall_int_active_state: hall-int-active-state {
697 pins = "gpio121";
698 function = "gpio";
699
700 bias-disable;
701 };
702
703 i2c1_active: i2c1-active-state {
704 pins = "gpio114", "gpio115";
705 function = "qup1";
706
707 bias-pull-up = <1>;
708 drive-strength = <2>;
709 };
710
711 i2c7_active: i2c7-active-state {
712 pins = "gpio98", "gpio99";
713 function = "qup7";
714
715 bias-pull-up;
716 drive-strength = <2>;
717 };
718
719 kb_int_default: kb-int-default-state {
720 pins = "gpio37";
721 function = "gpio";
722
723 bias-pull-up;
724 drive-strength = <2>;
725 };
726
727 pcie3_default_state: pcie3-default-state {
728 clkreq-pins {
729 pins = "gpio179";
730 function = "pci_e3";
731 bias-pull-up;
732 };
733
734 reset-n-pins {
735 pins = "gpio178";
736 function = "gpio";
737
738 drive-strength = <2>;
739 output-low;
740 bias-pull-down;
741 };
742
743 wake-n-pins {
744 pins = "gpio180";
745 function = "gpio";
746
747 drive-strength = <2>;
748 bias-pull-up;
749 };
750 };
751
752 tp_int_default: tp-int-default-state {
753 pins = "gpio24";
754 function = "gpio";
755
756 bias-pull-up;
757 drive-strength = <2>;
758 };
759
760 ts_int_default: ts-int-default-state {
761 pins = "gpio122";
762 function = "gpio";
763
764 bias-pull-up;
765 drive-strength = <2>;
766 };
767
768 usbprim_sbu_default: usbprim-sbu-state {
769 oe-n-pins {
770 pins = "gpio152";
771 function = "gpio";
772 bias-disable;
773 drive-strength = <16>;
774 output-high;
775 };
776
777 sel-pins {
778 pins = "gpio100";
779 function = "gpio";
780 bias-disable;
781 drive-strength = <16>;
782 };
783 };
784
785 usbsec_sbu_default: usbsec-sbu-state {
786 oe-n-pins {
787 pins = "gpio188";
788 function = "gpio";
789 bias-disable;
790 drive-strength = <16>;
791 output-high;
792 };
793
794 sel-pins {
795 pins = "gpio187";
796 function = "gpio";
797 bias-disable;
798 drive-strength = <16>;
799 };
800 };
801
802 uart13_state: uart13-state {
803 cts-pins {
804 pins = "gpio43";
805 function = "qup13";
806 bias-pull-down;
807 };
808
809 rts-tx-pins {
810 pins = "gpio44", "gpio45";
811 function = "qup13";
812 drive-strength = <2>;
813 bias-disable;
814 };
815
816 rx-pins {
817 pins = "gpio46";
818 function = "qup13";
819 bias-pull-up;
820 };
821 };
822 };