Debian Codegraph @

scripts/dtc/include-prefixes/arm64/qcom/sc7180-trogdor-wormdingler.dtsi

raw
1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
2 /*
3 * Google Wormdingler board device tree source
4 *
5 * Copyright 2021 Google LLC.
6 */
7
8 /dts-v1/;
9
10 #include "sc7180-trogdor.dtsi"
11 #include "sc7180-trogdor-detachable.dtsi"
12
13 / {
14 avdd_lcd: avdd-lcd-regulator {
15 compatible = "regulator-fixed";
16 regulator-name = "avdd_lcd";
17
18 gpio = <&tlmm 88 GPIO_ACTIVE_HIGH>;
19 enable-active-high;
20 pinctrl-names = "default";
21 pinctrl-0 = <&avdd_lcd_en>;
22
23 vin-supply = <&pp5000_a>;
24 };
25
26 avee_lcd: avee-lcd-regulator {
27 compatible = "regulator-fixed";
28 regulator-name = "avee_lcd";
29
30 gpio = <&tlmm 21 GPIO_ACTIVE_HIGH>;
31 enable-active-high;
32 pinctrl-names = "default";
33 pinctrl-0 = <&avee_lcd_en>;
34
35 vin-supply = <&pp5000_a>;
36 };
37
38 pp1800_ts:
39 v1p8_mipi: v1p8-mipi-regulator {
40 compatible = "regulator-fixed";
41 regulator-name = "v1p8_mipi";
42
43 gpio = <&tlmm 86 GPIO_ACTIVE_HIGH>;
44 enable-active-high;
45 pinctrl-names = "default";
46 pinctrl-0 = <&mipi_1800_en>;
47
48 vin-supply = <&pp3300_a>;
49 };
50
51 thermal-zones {
52 skin_temp_thermal: skin-temp-thermal {
53 polling-delay-passive = <250>;
54
55 thermal-sensors = <&pm6150_adc_tm 1>;
56 sustainable-power = <574>;
57
58 trips {
59 skin_temp_alert0: trip-point0 {
60 temperature = <58000>;
61 hysteresis = <1000>;
62 type = "passive";
63 };
64
65 skin_temp_alert1: trip-point1 {
66 temperature = <62500>;
67 hysteresis = <1000>;
68 type = "passive";
69 };
70
71 skin-temp-crit {
72 temperature = <68000>;
73 hysteresis = <1000>;
74 type = "critical";
75 };
76 };
77
78 cooling-maps {
79 map0 {
80 trip = <&skin_temp_alert0>;
81 cooling-device = <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
82 <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
83 };
84
85 map1 {
86 trip = <&skin_temp_alert1>;
87 cooling-device = <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
88 <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
89 };
90 };
91 };
92 };
93 };
94
95 &backlight {
96 pwms = <&cros_ec_pwm 0>;
97 };
98
99 &camcc {
100 status = "okay";
101 };
102
103 &cros_ec {
104 base_detection: cbas {
105 compatible = "google,cros-cbas";
106 };
107 };
108
109 &i2c4 {
110 status = "okay";
111 clock-frequency = <400000>;
112
113 ap_ts: touchscreen@1 {
114 compatible = "hid-over-i2c";
115 reg = <0x01>;
116 pinctrl-names = "default";
117 pinctrl-0 = <&ts_int_l>;
118
119 interrupt-parent = <&tlmm>;
120 interrupts = <9 IRQ_TYPE_EDGE_FALLING>;
121
122 panel = <&panel>;
123 post-power-on-delay-ms = <70>;
124 hid-descr-addr = <0x0001>;
125
126 vdd-supply = <&pp3300_ts>;
127 vddl-supply = <&pp1800_ts>;
128 };
129 };
130
131 &mdss_dsi0 {
132
133 panel: panel@0 {
134 reg = <0>;
135 enable-gpios = <&tlmm 87 GPIO_ACTIVE_HIGH>;
136 pinctrl-names = "default";
137 pinctrl-0 = <&vdd_reset_1800>;
138 avdd-supply = <&avdd_lcd>;
139 avee-supply = <&avee_lcd>;
140 pp1800-supply = <&v1p8_mipi>;
141 pp3300-supply = <&pp3300_dx_edp>;
142 backlight = <&backlight>;
143 rotation = <270>;
144
145 port {
146 panel_in: endpoint {
147 remote-endpoint = <&mdss_dsi0_out>;
148 };
149 };
150 };
151 };
152
153 &mdss_dsi0_out {
154 remote-endpoint = <&panel_in>;
155 data-lanes = <0 1 2 3>;
156 };
157
158 &pm6150_adc {
159 channel@4d {
160 reg = <ADC5_AMUX_THM1_100K_PU>;
161 qcom,ratiometric;
162 qcom,hw-settle-time = <200>;
163 label = "skin_therm";
164 };
165 };
166
167 &pm6150_adc_tm {
168 status = "okay";
169
170 skin-temp-thermistor@1 {
171 reg = <1>;
172 io-channels = <&pm6150_adc ADC5_AMUX_THM1_100K_PU>;
173 qcom,ratiometric;
174 qcom,hw-settle-time-us = <200>;
175 };
176 };
177
178 &pp1800_uf_cam {
179 status = "okay";
180 };
181
182 &pp1800_wf_cam {
183 status = "okay";
184 };
185
186 &pp2800_uf_cam {
187 status = "okay";
188 };
189
190 &pp2800_wf_cam {
191 status = "okay";
192 };
193
194 &wifi {
195 qcom,calibration-variant = "GO_WORMDINGLER";
196 };
197
198 /*
199 * No eDP on this board but it's logically the same signal so just give it
200 * a new name and assign the proper GPIO.
201 */
202 pp3300_disp_on: &pp3300_dx_edp {
203 gpio = <&tlmm 85 GPIO_ACTIVE_HIGH>;
204 };
205
206 /* PINCTRL - modifications to sc7180-trogdor.dtsi */
207
208 /*
209 * No eDP on this board but it's logically the same signal so just give it
210 * a new name and assign the proper GPIO.
211 */
212
213 tp_en: &en_pp3300_dx_edp {
214 pins = "gpio85";
215 };
216
217 /* PINCTRL - board-specific pinctrl */
218
219 &tlmm {
220 gpio-line-names = "HUB_RST_L",
221 "AP_RAM_ID0",
222 "AP_SKU_ID2",
223 "AP_RAM_ID1",
224 "",
225 "AP_RAM_ID2",
226 "UF_CAM_EN",
227 "WF_CAM_EN",
228 "TS_RESET_L",
229 "TS_INT_L",
230 "",
231 "",
232 "AP_EDP_BKLTEN",
233 "UF_CAM_MCLK",
234 "WF_CAM_CLK",
235 "",
236 "",
237 "UF_CAM_SDA",
238 "UF_CAM_SCL",
239 "WF_CAM_SDA",
240 "WF_CAM_SCL",
241 "AVEE_LCD_EN",
242 "",
243 "AMP_EN",
244 "",
245 "",
246 "",
247 "",
248 "HP_IRQ",
249 "WF_CAM_RST_L",
250 "UF_CAM_RST_L",
251 "AP_BRD_ID2",
252 "",
253 "AP_BRD_ID0",
254 "AP_H1_SPI_MISO",
255 "AP_H1_SPI_MOSI",
256 "AP_H1_SPI_CLK",
257 "AP_H1_SPI_CS_L",
258 "BT_UART_CTS",
259 "BT_UART_RTS",
260 "BT_UART_TXD",
261 "BT_UART_RXD",
262 "H1_AP_INT_ODL",
263 "",
264 "UART_AP_TX_DBG_RX",
265 "UART_DBG_TX_AP_RX",
266 "HP_I2C_SDA",
267 "HP_I2C_SCL",
268 "FORCED_USB_BOOT",
269 "AMP_BCLK",
270 "AMP_LRCLK",
271 "AMP_DIN",
272 "",
273 "HP_BCLK",
274 "HP_LRCLK",
275 "HP_DOUT",
276 "HP_DIN",
277 "HP_MCLK",
278 "AP_SKU_ID0",
279 "AP_EC_SPI_MISO",
280 "AP_EC_SPI_MOSI",
281 "AP_EC_SPI_CLK",
282 "AP_EC_SPI_CS_L",
283 "AP_SPI_CLK",
284 "AP_SPI_MOSI",
285 "AP_SPI_MISO",
286 /*
287 * AP_FLASH_WP_L is crossystem ABI. Schematics
288 * call it BIOS_FLASH_WP_L.
289 */
290 "AP_FLASH_WP_L",
291 "",
292 "AP_SPI_CS0_L",
293 "",
294 "",
295 "",
296 "",
297 "WLAN_SW_CTRL",
298 "",
299 "REPORT_E",
300 "",
301 "ID0",
302 "",
303 "ID1",
304 "",
305 "",
306 "",
307 "CODEC_PWR_EN",
308 "HUB_EN",
309 "TP_EN",
310 "MIPI_1.8V_EN",
311 "VDD_RESET_1.8V",
312 "AVDD_LCD_EN",
313 "",
314 "AP_SKU_ID1",
315 "AP_RST_REQ",
316 "",
317 "AP_BRD_ID1",
318 "AP_EC_INT_L",
319 "SDM_GRFC_3",
320 "",
321 "",
322 "BOOT_CONFIG_4",
323 "BOOT_CONFIG_2",
324 "",
325 "",
326 "",
327 "",
328 "",
329 "",
330 "",
331 "BOOT_CONFIG_3",
332 "WCI2_LTE_COEX_TXD",
333 "WCI2_LTE_COEX_RXD",
334 "",
335 "",
336 "",
337 "",
338 "FORCED_USB_BOOT_POL",
339 "AP_TS_PEN_I2C_SDA",
340 "AP_TS_PEN_I2C_SCL",
341 "DP_HOT_PLUG_DET",
342 "EC_IN_RW_ODL";
343
344 avdd_lcd_en: avdd-lcd-en-state {
345 pins = "gpio88";
346 function = "gpio";
347 drive-strength = <2>;
348 bias-disable;
349 };
350
351 avee_lcd_en: avee-lcd-en-state {
352 pins = "gpio21";
353 function = "gpio";
354 drive-strength = <2>;
355 bias-disable;
356 };
357
358 mipi_1800_en: mipi-1800-en-state {
359 pins = "gpio86";
360 function = "gpio";
361 drive-strength = <2>;
362 bias-disable;
363 };
364
365 vdd_reset_1800: vdd-reset-1800-state {
366 pins = "gpio87";
367 function = "gpio";
368 drive-strength = <2>;
369 bias-disable;
370 };
371 };