| 1 |
// SPDX-License-Identifier: (GPL-2.0+ OR MIT) |
| 2 |
/* |
| 3 |
* Google Trogdor dts fragment for the boards with TI sn65dsi86 edp bridge |
| 4 |
* |
| 5 |
* Copyright 2021 Google LLC. |
| 6 |
*/ |
| 7 |
|
| 8 |
#include <dt-bindings/gpio/gpio.h> |
| 9 |
|
| 10 |
/* |
| 11 |
* ADDITIONS TO FIXED REGULATORS DEFINED IN PARENT DEVICE TREE FILES |
| 12 |
* |
| 13 |
* Sort order matches the order in the parent files (parents before children). |
| 14 |
*/ |
| 15 |
|
| 16 |
&pp3300_dx_edp { |
| 17 |
off-on-delay-us = <500000>; |
| 18 |
|
| 19 |
/* |
| 20 |
* It's nicer to start with this regulator enabled. The |
| 21 |
* bootloader may have left it on and it's nice not to cause an |
| 22 |
* extra power cycle of the touchscreen and eDP panel at bootup. |
| 23 |
* This should help speed bootup because we have off-on-delay-us. |
| 24 |
*/ |
| 25 |
regulator-boot-on; |
| 26 |
}; |
| 27 |
|
| 28 |
/* ADDITIONS TO NODES DEFINED IN PARENT DEVICE TREE FILES */ |
| 29 |
|
| 30 |
edp_brij_i2c: &i2c2 { |
| 31 |
status = "okay"; |
| 32 |
clock-frequency = <400000>; |
| 33 |
|
| 34 |
sn65dsi86_bridge: bridge@2d { |
| 35 |
compatible = "ti,sn65dsi86"; |
| 36 |
reg = <0x2d>; |
| 37 |
pinctrl-names = "default"; |
| 38 |
pinctrl-0 = <&edp_brij_en>, <&edp_brij_irq>; |
| 39 |
gpio-controller; |
| 40 |
#gpio-cells = <2>; |
| 41 |
|
| 42 |
interrupt-parent = <&tlmm>; |
| 43 |
interrupts = <11 IRQ_TYPE_LEVEL_HIGH>; |
| 44 |
|
| 45 |
enable-gpios = <&tlmm 104 GPIO_ACTIVE_HIGH>; |
| 46 |
|
| 47 |
vpll-supply = <&pp1800_edp_vpll>; |
| 48 |
vccio-supply = <&pp1800_brij_vccio>; |
| 49 |
vcca-supply = <&pp1200_brij>; |
| 50 |
vcc-supply = <&pp1200_brij>; |
| 51 |
|
| 52 |
clocks = <&rpmhcc RPMH_LN_BB_CLK3>; |
| 53 |
clock-names = "refclk"; |
| 54 |
|
| 55 |
no-hpd; |
| 56 |
|
| 57 |
ports { |
| 58 |
#address-cells = <1>; |
| 59 |
#size-cells = <0>; |
| 60 |
|
| 61 |
port@0 { |
| 62 |
reg = <0>; |
| 63 |
sn65dsi86_in: endpoint { |
| 64 |
remote-endpoint = <&mdss_dsi0_out>; |
| 65 |
}; |
| 66 |
}; |
| 67 |
|
| 68 |
port@1 { |
| 69 |
reg = <1>; |
| 70 |
sn65dsi86_out: endpoint { |
| 71 |
data-lanes = <0 1>; |
| 72 |
remote-endpoint = <&panel_in_edp>; |
| 73 |
}; |
| 74 |
}; |
| 75 |
}; |
| 76 |
|
| 77 |
aux-bus { |
| 78 |
panel: panel { |
| 79 |
/* Compatible will be filled in per-board */ |
| 80 |
power-supply = <&pp3300_dx_edp>; |
| 81 |
backlight = <&backlight>; |
| 82 |
hpd-gpios = <&sn65dsi86_bridge 2 GPIO_ACTIVE_HIGH>; |
| 83 |
|
| 84 |
port { |
| 85 |
panel_in_edp: endpoint { |
| 86 |
remote-endpoint = <&sn65dsi86_out>; |
| 87 |
}; |
| 88 |
}; |
| 89 |
}; |
| 90 |
}; |
| 91 |
}; |
| 92 |
}; |
| 93 |
|
| 94 |
&mdss_dsi0_out { |
| 95 |
remote-endpoint = <&sn65dsi86_in>; |
| 96 |
}; |
| 97 |
|
| 98 |
&tlmm { |
| 99 |
edp_brij_irq: edp-brij-irq-state { |
| 100 |
pins = "gpio11"; |
| 101 |
function = "gpio"; |
| 102 |
drive-strength = <2>; |
| 103 |
bias-pull-down; |
| 104 |
}; |
| 105 |
}; |