Debian Codegraph @

scripts/dtc/include-prefixes/arm64/qcom/sc7180-trogdor-quackingstick.dtsi

raw
1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
2 /*
3 * Google Quackingstick board device tree source
4 *
5 * Copyright 2021 Google LLC.
6 */
7
8 /dts-v1/;
9
10 #include "sc7180-trogdor.dtsi"
11 #include "sc7180-trogdor-rt5682i-sku.dtsi"
12 #include "sc7180-trogdor-detachable.dtsi"
13
14 / {
15 ppvar_lcd: ppvar-lcd-regulator {
16 compatible = "regulator-fixed";
17 regulator-name = "ppvar_lcd";
18
19 gpio = <&tlmm 88 GPIO_ACTIVE_HIGH>;
20 enable-active-high;
21 pinctrl-names = "default";
22 pinctrl-0 = <&ppvar_lcd_en>;
23
24 vin-supply = <&pp5000_a>;
25 };
26
27 v1p8_disp: v1p8-disp-regulator {
28 compatible = "regulator-fixed";
29 regulator-name = "v1p8_disp";
30
31 gpio = <&tlmm 86 GPIO_ACTIVE_HIGH>;
32 enable-active-high;
33 pinctrl-names = "default";
34 pinctrl-0 = <&pp1800_disp_on>;
35
36 vin-supply = <&pp3300_a>;
37 };
38 };
39
40 &backlight {
41 pwms = <&cros_ec_pwm 0>;
42 };
43
44 &camcc {
45 status = "okay";
46 };
47
48 &gpio_keys {
49 status = "okay";
50 };
51
52 &i2c4 {
53 status = "okay";
54 clock-frequency = <400000>;
55
56 ap_ts: touchscreen@10 {
57 compatible = "hid-over-i2c";
58 reg = <0x10>;
59 pinctrl-names = "default";
60 pinctrl-0 = <&ts_int_l>, <&ts_reset_l>;
61
62 interrupt-parent = <&tlmm>;
63 interrupts = <9 IRQ_TYPE_LEVEL_LOW>;
64
65 panel = <&panel>;
66 post-power-on-delay-ms = <20>;
67 hid-descr-addr = <0x0001>;
68
69 vdd-supply = <&pp3300_ts>;
70 };
71 };
72
73 &mdss_dsi0 {
74 panel: panel@0 {
75 /* Compatible will be filled in per-board */
76 reg = <0>;
77 enable-gpios = <&tlmm 87 GPIO_ACTIVE_HIGH>;
78 pinctrl-names = "default";
79 pinctrl-0 = <&lcd_rst>;
80 avdd-supply = <&ppvar_lcd>;
81 avee-supply = <&ppvar_lcd>;
82 pp1800-supply = <&v1p8_disp>;
83 pp3300-supply = <&pp3300_dx_edp>;
84 backlight = <&backlight>;
85 rotation = <270>;
86
87 port {
88 panel_in: endpoint {
89 remote-endpoint = <&mdss_dsi0_out>;
90 };
91 };
92 };
93 };
94
95 &mdss_dsi0_out {
96 remote-endpoint = <&panel_in>;
97 data-lanes = <0 1 2 3>;
98 };
99
100 &sdhc_2 {
101 status = "okay";
102 };
103
104 &pp1800_uf_cam {
105 status = "okay";
106 };
107
108 &pp1800_wf_cam {
109 status = "okay";
110 };
111
112 &pp2800_uf_cam {
113 status = "okay";
114 };
115
116 &pp2800_wf_cam {
117 status = "okay";
118 };
119
120 /*
121 * No eDP on this board but it's logically the same signal so just give it
122 * a new name and assign the proper GPIO.
123 */
124 pp3300_disp_on: &pp3300_dx_edp {
125 gpio = <&tlmm 67 GPIO_ACTIVE_HIGH>;
126 };
127
128 /* This board only has 1 USB Type-C port. */
129 &usb_c1 {
130 status = "disabled";
131 };
132
133 /* PINCTRL - modifications to sc7180-trogdor.dtsi */
134
135 /*
136 * No eDP on this board but it's logically the same signal so just give it
137 * a new name and assign the proper GPIO.
138 */
139
140 tp_en: &en_pp3300_dx_edp {
141 pins = "gpio67";
142 };
143
144 /* PINCTRL - board-specific pinctrl */
145
146 &tlmm {
147 gpio-line-names = "HUB_RST_L",
148 "AP_RAM_ID0",
149 "AP_SKU_ID2",
150 "AP_RAM_ID1",
151 "",
152 "AP_RAM_ID2",
153 "UF_CAM_EN",
154 "WF_CAM_EN",
155 "TS_RESET_L",
156 "TS_INT_L",
157 "",
158 "",
159 "AP_EDP_BKLTEN",
160 "UF_CAM_MCLK",
161 "WF_CAM_CLK",
162 "EDP_BRIJ_I2C_SDA",
163 "EDP_BRIJ_I2C_SCL",
164 "UF_CAM_SDA",
165 "UF_CAM_SCL",
166 "WF_CAM_SDA",
167 "WF_CAM_SCL",
168 "",
169 "",
170 "AMP_EN",
171 "P_SENSOR_INT_L",
172 "AP_SAR_SENSOR_SDA",
173 "AP_SAR_SENSOR_SCL",
174 "",
175 "HP_IRQ",
176 "WF_CAM_RST_L",
177 "UF_CAM_RST_L",
178 "AP_BRD_ID2",
179 "",
180 "AP_BRD_ID0",
181 "AP_H1_SPI_MISO",
182 "AP_H1_SPI_MOSI",
183 "AP_H1_SPI_CLK",
184 "AP_H1_SPI_CS_L",
185 "",
186 "",
187 "",
188 "",
189 "H1_AP_INT_ODL",
190 "",
191 "UART_AP_TX_DBG_RX",
192 "UART_DBG_TX_AP_RX",
193 "HP_I2C_SDA",
194 "HP_I2C_SCL",
195 "FORCED_USB_BOOT",
196 "",
197 "",
198 "AMP_DIN",
199 "PEN_DET_ODL",
200 "HP_BCLK",
201 "HP_LRCLK",
202 "HP_DOUT",
203 "HP_DIN",
204 "HP_MCLK",
205 "AP_SKU_ID0",
206 "AP_EC_SPI_MISO",
207 "AP_EC_SPI_MOSI",
208 "AP_EC_SPI_CLK",
209 "AP_EC_SPI_CS_L",
210 "AP_SPI_CLK",
211 "AP_SPI_MOSI",
212 "AP_SPI_MISO",
213 /*
214 * AP_FLASH_WP_L is crossystem ABI. Schematics
215 * call it BIOS_FLASH_WP_L.
216 */
217 "AP_FLASH_WP_L",
218 "EN_PP3300_DX_EDP",
219 "AP_SPI_CS0_L",
220 "SD_CD_ODL",
221 "",
222 "",
223 "",
224 "",
225 "",
226 "UIM2_DATA",
227 "UIM2_CLK",
228 "UIM2_RST",
229 "UIM2_PRESENT_L",
230 "UIM1_DATA",
231 "UIM1_CLK",
232 "UIM1_RST",
233 "",
234 "CODEC_PWR_EN",
235 "HUB_EN",
236 "",
237 "PP1800_DISP_ON",
238 "LCD_RST",
239 "PPVAR_LCD_EN",
240 "",
241 "AP_SKU_ID1",
242 "AP_RST_REQ",
243 "",
244 "AP_BRD_ID1",
245 "AP_EC_INT_L",
246 "",
247 "",
248 "",
249 "",
250 "",
251 "",
252 "",
253 "",
254 "",
255 "",
256 "",
257 "",
258 "",
259 "",
260 "",
261 "",
262 "",
263 "",
264 "",
265 "",
266 "AP_TS_I2C_SDA",
267 "AP_TS_I2C_SCL",
268 "DP_HOT_PLUG_DET",
269 "EC_IN_RW_ODL";
270
271 lcd_rst: lcd-rst-state {
272 pins = "gpio87";
273 function = "gpio";
274 drive-strength = <2>;
275 bias-disable;
276 };
277
278 ppvar_lcd_en: ppvar-lcd-en-state {
279 pins = "gpio88";
280 function = "gpio";
281 drive-strength = <2>;
282 bias-disable;
283 };
284
285 pp1800_disp_on: pp1800-disp-on-state {
286 pins = "gpio86";
287 function = "gpio";
288 drive-strength = <2>;
289 bias-disable;
290 };
291 };