| 1 |
// SPDX-License-Identifier: (GPL-2.0+ OR MIT) |
| 2 |
/* |
| 3 |
* Google Trogdor dts fragment for the boards with Parade ps8640 edp bridge |
| 4 |
* |
| 5 |
* Copyright 2021 Google LLC. |
| 6 |
*/ |
| 7 |
|
| 8 |
#include <dt-bindings/gpio/gpio.h> |
| 9 |
|
| 10 |
/ { |
| 11 |
pp3300_brij_ps8640: pp3300-brij-ps8640-regulator { |
| 12 |
compatible = "regulator-fixed"; |
| 13 |
status = "okay"; |
| 14 |
regulator-name = "pp3300_brij_ps8640"; |
| 15 |
|
| 16 |
regulator-min-microvolt = <3300000>; |
| 17 |
regulator-max-microvolt = <3300000>; |
| 18 |
|
| 19 |
gpio = <&tlmm 32 GPIO_ACTIVE_HIGH>; |
| 20 |
enable-active-high; |
| 21 |
|
| 22 |
pinctrl-names = "default"; |
| 23 |
pinctrl-0 = <&en_pp3300_edp_brij_ps8640>; |
| 24 |
|
| 25 |
vin-supply = <&pp3300_a>; |
| 26 |
}; |
| 27 |
}; |
| 28 |
|
| 29 |
/* |
| 30 |
* ADDITIONS TO FIXED REGULATORS DEFINED IN PARENT DEVICE TREE FILES |
| 31 |
* |
| 32 |
* Sort order matches the order in the parent files (parents before children). |
| 33 |
*/ |
| 34 |
|
| 35 |
&pp3300_dx_edp { |
| 36 |
off-on-delay-us = <500000>; |
| 37 |
|
| 38 |
/* |
| 39 |
* It's nicer to start with this regulator enabled. The |
| 40 |
* bootloader may have left it on and it's nice not to cause an |
| 41 |
* extra power cycle of the touchscreen and eDP panel at bootup. |
| 42 |
* This should help speed bootup because we have off-on-delay-us. |
| 43 |
*/ |
| 44 |
regulator-boot-on; |
| 45 |
}; |
| 46 |
|
| 47 |
/* ADDITIONS TO NODES DEFINED IN PARENT DEVICE TREE FILES */ |
| 48 |
|
| 49 |
edp_brij_i2c: &i2c2 { |
| 50 |
status = "okay"; |
| 51 |
clock-frequency = <400000>; |
| 52 |
|
| 53 |
ps8640_bridge: bridge@8 { |
| 54 |
compatible = "parade,ps8640"; |
| 55 |
reg = <0x8>; |
| 56 |
|
| 57 |
powerdown-gpios = <&tlmm 104 GPIO_ACTIVE_LOW>; |
| 58 |
reset-gpios = <&tlmm 11 GPIO_ACTIVE_LOW>; |
| 59 |
|
| 60 |
pinctrl-names = "default"; |
| 61 |
pinctrl-0 = <&edp_brij_en>, <&edp_brij_ps8640_rst>; |
| 62 |
|
| 63 |
vdd12-supply = <&pp1200_brij>; |
| 64 |
vdd33-supply = <&pp3300_brij_ps8640>; |
| 65 |
|
| 66 |
ports { |
| 67 |
#address-cells = <1>; |
| 68 |
#size-cells = <0>; |
| 69 |
|
| 70 |
port@0 { |
| 71 |
reg = <0>; |
| 72 |
ps8640_in: endpoint { |
| 73 |
remote-endpoint = <&mdss_dsi0_out>; |
| 74 |
}; |
| 75 |
}; |
| 76 |
|
| 77 |
port@1 { |
| 78 |
reg = <1>; |
| 79 |
ps8640_out: endpoint { |
| 80 |
remote-endpoint = <&panel_in_edp>; |
| 81 |
}; |
| 82 |
}; |
| 83 |
}; |
| 84 |
|
| 85 |
aux-bus { |
| 86 |
panel: panel { |
| 87 |
/* Compatible will be filled in per-board */ |
| 88 |
power-supply = <&pp3300_dx_edp>; |
| 89 |
backlight = <&backlight>; |
| 90 |
|
| 91 |
port { |
| 92 |
panel_in_edp: endpoint { |
| 93 |
remote-endpoint = <&ps8640_out>; |
| 94 |
}; |
| 95 |
}; |
| 96 |
}; |
| 97 |
}; |
| 98 |
}; |
| 99 |
}; |
| 100 |
|
| 101 |
&mdss_dsi0_out { |
| 102 |
remote-endpoint = <&ps8640_in>; |
| 103 |
}; |
| 104 |
|
| 105 |
&tlmm { |
| 106 |
edp_brij_ps8640_rst: edp-brij-ps8640-rst-state { |
| 107 |
pins = "gpio11"; |
| 108 |
function = "gpio"; |
| 109 |
drive-strength = <2>; |
| 110 |
bias-disable; |
| 111 |
}; |
| 112 |
|
| 113 |
en_pp3300_edp_brij_ps8640: en-pp3300-edp-brij-ps8640-state { |
| 114 |
pins = "gpio32"; |
| 115 |
function = "gpio"; |
| 116 |
drive-strength = <2>; |
| 117 |
bias-disable; |
| 118 |
}; |
| 119 |
}; |