| 1 |
// SPDX-License-Identifier: (GPL-2.0+ OR MIT) |
| 2 |
/* |
| 3 |
* Google Homestar board device tree source |
| 4 |
* |
| 5 |
* Copyright 2021 Google LLC. |
| 6 |
*/ |
| 7 |
|
| 8 |
#include "sc7180-trogdor-rt5682i-sku.dtsi" |
| 9 |
#include "sc7180-trogdor-detachable.dtsi" |
| 10 |
|
| 11 |
/ { |
| 12 |
/* BOARD-SPECIFIC TOP LEVEL NODES */ |
| 13 |
|
| 14 |
max98360a_1: amplifier-1 { |
| 15 |
compatible = "maxim,max98360a"; |
| 16 |
#sound-dai-cells = <0>; |
| 17 |
}; |
| 18 |
|
| 19 |
max98360a_2: amplifier-2 { |
| 20 |
compatible = "maxim,max98360a"; |
| 21 |
#sound-dai-cells = <0>; |
| 22 |
}; |
| 23 |
|
| 24 |
max98360a_3: amplifier-3 { |
| 25 |
compatible = "maxim,max98360a"; |
| 26 |
#sound-dai-cells = <0>; |
| 27 |
}; |
| 28 |
|
| 29 |
pp3300_touch: pp3300-touch-regulator { |
| 30 |
compatible = "regulator-fixed"; |
| 31 |
regulator-name = "pp3300_touch"; |
| 32 |
|
| 33 |
regulator-min-microvolt = <3300000>; |
| 34 |
regulator-max-microvolt = <3300000>; |
| 35 |
|
| 36 |
gpio = <&tlmm 87 GPIO_ACTIVE_HIGH>; |
| 37 |
enable-active-high; |
| 38 |
pinctrl-names = "default"; |
| 39 |
pinctrl-0 = <&en_pp3300_touch>; |
| 40 |
|
| 41 |
vin-supply = <&pp3300_a>; |
| 42 |
}; |
| 43 |
|
| 44 |
thermal-zones { |
| 45 |
skin_temp_thermal: skin-temp-thermal { |
| 46 |
polling-delay-passive = <250>; |
| 47 |
|
| 48 |
thermal-sensors = <&pm6150_adc_tm 1>; |
| 49 |
sustainable-power = <965>; |
| 50 |
|
| 51 |
trips { |
| 52 |
skin_temp_alert0: trip-point0 { |
| 53 |
temperature = <55000>; |
| 54 |
hysteresis = <1000>; |
| 55 |
type = "passive"; |
| 56 |
}; |
| 57 |
|
| 58 |
skin_temp_alert1: trip-point1 { |
| 59 |
temperature = <58000>; |
| 60 |
hysteresis = <1000>; |
| 61 |
type = "passive"; |
| 62 |
}; |
| 63 |
|
| 64 |
skin-temp-crit { |
| 65 |
temperature = <73000>; |
| 66 |
hysteresis = <1000>; |
| 67 |
type = "critical"; |
| 68 |
}; |
| 69 |
}; |
| 70 |
|
| 71 |
cooling-maps { |
| 72 |
map0 { |
| 73 |
trip = <&skin_temp_alert0>; |
| 74 |
cooling-device = <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| 75 |
<&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; |
| 76 |
}; |
| 77 |
|
| 78 |
map1 { |
| 79 |
trip = <&skin_temp_alert1>; |
| 80 |
cooling-device = <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| 81 |
<&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; |
| 82 |
}; |
| 83 |
}; |
| 84 |
}; |
| 85 |
}; |
| 86 |
}; |
| 87 |
|
| 88 |
/* |
| 89 |
* ADDITIONS TO FIXED REGULATORS DEFINED IN PARENT DEVICE TREE FILES |
| 90 |
* |
| 91 |
* Sort order matches the order in the parent files (parents before children). |
| 92 |
*/ |
| 93 |
|
| 94 |
&pp3300_dx_edp { |
| 95 |
/* |
| 96 |
* The atna33xc20 really likes to be power cycled to keep it from |
| 97 |
* getting in a bad state. This is the reason that the touchscreen |
| 98 |
* rail and eDP rails are separate from each other on homestar (but |
| 99 |
* not other trogdor devices) Make sure it starts "off" at bootup. |
| 100 |
*/ |
| 101 |
/delete-property/ regulator-boot-on; |
| 102 |
}; |
| 103 |
|
| 104 |
/* ADDITIONS TO NODES DEFINED IN PARENT DEVICE TREE FILES */ |
| 105 |
|
| 106 |
ap_ts_pen_1v8: &i2c4 { |
| 107 |
status = "okay"; |
| 108 |
clock-frequency = <400000>; |
| 109 |
|
| 110 |
ap_ts: touchscreen@14 { |
| 111 |
compatible = "goodix,gt7375p"; |
| 112 |
reg = <0x14>; |
| 113 |
pinctrl-names = "default"; |
| 114 |
pinctrl-0 = <&ts_int_l>, <&ts_reset_l>; |
| 115 |
|
| 116 |
interrupt-parent = <&tlmm>; |
| 117 |
interrupts = <9 IRQ_TYPE_LEVEL_LOW>; |
| 118 |
|
| 119 |
panel = <&panel>; |
| 120 |
reset-gpios = <&tlmm 8 GPIO_ACTIVE_LOW>; |
| 121 |
|
| 122 |
vdd-supply = <&pp3300_touch>; |
| 123 |
}; |
| 124 |
}; |
| 125 |
|
| 126 |
/* Panel controls backlight over aux channel */ |
| 127 |
|
| 128 |
&backlight { |
| 129 |
status = "disabled"; |
| 130 |
}; |
| 131 |
|
| 132 |
&camcc { |
| 133 |
status = "okay"; |
| 134 |
}; |
| 135 |
|
| 136 |
&panel { |
| 137 |
compatible = "samsung,atna33xc20"; |
| 138 |
enable-gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>; |
| 139 |
/delete-property/ backlight; |
| 140 |
}; |
| 141 |
|
| 142 |
&pm6150_adc { |
| 143 |
channel@4d { |
| 144 |
reg = <ADC5_AMUX_THM1_100K_PU>; |
| 145 |
qcom,ratiometric; |
| 146 |
qcom,hw-settle-time = <200>; |
| 147 |
label = "skin_therm"; |
| 148 |
}; |
| 149 |
}; |
| 150 |
|
| 151 |
&pm6150_adc_tm { |
| 152 |
status = "okay"; |
| 153 |
|
| 154 |
skin-temp-thermistor@1 { |
| 155 |
reg = <1>; |
| 156 |
io-channels = <&pm6150_adc ADC5_AMUX_THM1_100K_PU>; |
| 157 |
qcom,ratiometric; |
| 158 |
qcom,hw-settle-time-us = <200>; |
| 159 |
}; |
| 160 |
}; |
| 161 |
|
| 162 |
&pp1800_uf_cam { |
| 163 |
status = "okay"; |
| 164 |
}; |
| 165 |
|
| 166 |
&pp1800_wf_cam { |
| 167 |
status = "okay"; |
| 168 |
}; |
| 169 |
|
| 170 |
&pp2800_uf_cam { |
| 171 |
status = "okay"; |
| 172 |
}; |
| 173 |
|
| 174 |
&pp2800_wf_cam { |
| 175 |
status = "okay"; |
| 176 |
}; |
| 177 |
|
| 178 |
&pp3300_dx_edp { |
| 179 |
gpio = <&tlmm 67 GPIO_ACTIVE_HIGH>; |
| 180 |
}; |
| 181 |
|
| 182 |
&secondary_mi2s { |
| 183 |
qcom,playback-sd-lines = <0 1>; |
| 184 |
}; |
| 185 |
|
| 186 |
&sound_multimedia1_codec { |
| 187 |
sound-dai = <&max98360a>, <&max98360a_1>, <&max98360a_2>, <&max98360a_3> ; |
| 188 |
}; |
| 189 |
|
| 190 |
&wifi { |
| 191 |
qcom,calibration-variant = "GO_HOMESTAR"; |
| 192 |
}; |
| 193 |
|
| 194 |
/* PINCTRL - modifications to sc7180-trogdor.dtsi */ |
| 195 |
|
| 196 |
&en_pp3300_dx_edp { |
| 197 |
pins = "gpio67"; |
| 198 |
}; |
| 199 |
|
| 200 |
&sec_mi2s_active { |
| 201 |
pins = "gpio49", "gpio50", "gpio51", "gpio52"; |
| 202 |
}; |
| 203 |
|
| 204 |
&ts_reset_l { |
| 205 |
/* |
| 206 |
* We want reset state by default and it will be up to the |
| 207 |
* driver to disable this when it's ready. |
| 208 |
*/ |
| 209 |
output-low; |
| 210 |
}; |
| 211 |
|
| 212 |
/* PINCTRL - board-specific pinctrl */ |
| 213 |
|
| 214 |
&tlmm { |
| 215 |
gpio-line-names = "HUB_RST_L", |
| 216 |
"AP_RAM_ID0", |
| 217 |
"AP_SKU_ID2", |
| 218 |
"AP_RAM_ID1", |
| 219 |
"", |
| 220 |
"AP_RAM_ID2", |
| 221 |
"UF_CAM_EN", |
| 222 |
"WF_CAM_EN", |
| 223 |
"TS_RESET_L", |
| 224 |
"TS_INT_L", |
| 225 |
"", |
| 226 |
"EDP_BRIJ_IRQ", |
| 227 |
"AP_EDP_BKLTEN", |
| 228 |
"UF_CAM_MCLK", |
| 229 |
"WF_CAM_CLK", |
| 230 |
"EDP_BRIJ_I2C_SDA", |
| 231 |
"EDP_BRIJ_I2C_SCL", |
| 232 |
"UF_CAM_SDA", |
| 233 |
"UF_CAM_SCL", |
| 234 |
"WF_CAM_SDA", |
| 235 |
"WF_CAM_SCL", |
| 236 |
"AVEE_LCD_EN", |
| 237 |
"", |
| 238 |
"AMP_EN", |
| 239 |
"AMP_EN2", |
| 240 |
"AP_SAR_SENSOR_SDA", |
| 241 |
"AP_SAR_SENSOR_SCL", |
| 242 |
"SEL_LCM", |
| 243 |
"HP_IRQ", |
| 244 |
"WF_CAM_RST_L", |
| 245 |
"UF_CAM_RST_L", |
| 246 |
"AP_BRD_ID2", |
| 247 |
"BRIJ_SUSPEND", |
| 248 |
"AP_BRD_ID0", |
| 249 |
"AP_H1_SPI_MISO", |
| 250 |
"AP_H1_SPI_MOSI", |
| 251 |
"AP_H1_SPI_CLK", |
| 252 |
"AP_H1_SPI_CS_L", |
| 253 |
"BT_UART_CTS", |
| 254 |
"BT_UART_RTS", |
| 255 |
"BT_UART_TXD", |
| 256 |
"BT_UART_RXD", |
| 257 |
"H1_AP_INT_ODL", |
| 258 |
"", |
| 259 |
"UART_AP_TX_DBG_RX", |
| 260 |
"UART_DBG_TX_AP_RX", |
| 261 |
"HP_I2C_SDA", |
| 262 |
"HP_I2C_SCL", |
| 263 |
"FORCED_USB_BOOT", |
| 264 |
"AMP_BCLK", |
| 265 |
"AMP_LRCLK", |
| 266 |
"AMP_DIN", |
| 267 |
"AMP_DIN_2", |
| 268 |
"HP_BCLK", |
| 269 |
"HP_LRCLK", |
| 270 |
"HP_DOUT", |
| 271 |
"HP_DIN", |
| 272 |
"HP_MCLK", |
| 273 |
"AP_SKU_ID0", |
| 274 |
"AP_EC_SPI_MISO", |
| 275 |
"AP_EC_SPI_MOSI", |
| 276 |
"AP_EC_SPI_CLK", |
| 277 |
"AP_EC_SPI_CS_L", |
| 278 |
"AP_SPI_CLK", |
| 279 |
"AP_SPI_MOSI", |
| 280 |
"AP_SPI_MISO", |
| 281 |
/* |
| 282 |
* AP_FLASH_WP_L is crossystem ABI. Schematics |
| 283 |
* call it BIOS_FLASH_WP_L. |
| 284 |
*/ |
| 285 |
"AP_FLASH_WP_L", |
| 286 |
"EN_PP3300_DX_EDP", |
| 287 |
"AP_SPI_CS0_L", |
| 288 |
"SD_CD_ODL", |
| 289 |
"", |
| 290 |
"", |
| 291 |
"", |
| 292 |
"WLAN_SW_CTRL", |
| 293 |
"", |
| 294 |
"REPORT_E", |
| 295 |
"VDD_RESET_1.8V", |
| 296 |
"ID0", |
| 297 |
"", |
| 298 |
"ID1", |
| 299 |
"AVDD_LCD_EN", |
| 300 |
"MIPI_1.8V_EN", |
| 301 |
"", |
| 302 |
"CODEC_PWR_EN", |
| 303 |
"HUB_EN", |
| 304 |
"", |
| 305 |
"PP1800_MIPI_SW_EN", |
| 306 |
"EN_PP3300_TOUCH", |
| 307 |
"", |
| 308 |
"", |
| 309 |
"AP_SKU_ID1", |
| 310 |
"AP_RST_REQ", |
| 311 |
"", |
| 312 |
"AP_BRD_ID1", |
| 313 |
"AP_EC_INT_L", |
| 314 |
"SDM_GRFC_3", |
| 315 |
"", |
| 316 |
"", |
| 317 |
"BOOT_CONFIG_4", |
| 318 |
"BOOT_CONFIG_2", |
| 319 |
"", |
| 320 |
"", |
| 321 |
"", |
| 322 |
"", |
| 323 |
"EDP_BRIJ_EN", |
| 324 |
"", |
| 325 |
"", |
| 326 |
"BOOT_CONFIG_3", |
| 327 |
"WCI2_LTE_COEX_TXD", |
| 328 |
"WCI2_LTE_COEX_RXD", |
| 329 |
"", |
| 330 |
"", |
| 331 |
"", |
| 332 |
"", |
| 333 |
"FORCED_USB_BOOT_POL", |
| 334 |
"AP_TS_PEN_I2C_SDA", |
| 335 |
"AP_TS_PEN_I2C_SCL", |
| 336 |
"DP_HOT_PLUG_DET", |
| 337 |
"EC_IN_RW_ODL"; |
| 338 |
|
| 339 |
en_pp3300_touch: en-pp3300-touch-state { |
| 340 |
pins = "gpio87"; |
| 341 |
function = "gpio"; |
| 342 |
drive-strength = <2>; |
| 343 |
bias-disable; |
| 344 |
}; |
| 345 |
}; |